old-cross-binutils/gdb/event-loop.c
Pedro Alves 3b12939dfc Replace the sync_execution global with a new enum prompt_state tristate
When sync_execution (a boolean) is true, it means we're running a
foreground command -- we hide the prompt stop listening to input, give
the inferior the terminal, then go to the event loop waiting for the
target to stop.

With multiple independent UIs, we need to track whether each UI is
synchronously blocked waiting for the target.  IOW, if you do
"continue" in one console, that console stops accepting commands, but
you should still be free to type other commands in the others
consoles.

Just simply making sync_execution be per-UI alone not sufficient,
because of this in fetch_inferior_event:

  /* If the inferior was in sync execution mode, and now isn't,
     restore the prompt (a synchronous execution command has finished,
     and we're ready for input).  */
  if (current_ui->async && was_sync && !sync_execution)
    observer_notify_sync_execution_done ();

We'd have to record at entry the "was_sync" state for each UI, not
just of the current UI.

This patch instead replaces the sync_execution flag by a per-UI
tristate flag indicating the command line prompt state:

 enum prompt_state
 {
   /* The command line is blocked simulating synchronous execution.
      This is used to implement the foreground execution commands
      ('run', 'continue', etc.).  We won't display the prompt and
      accept further commands until the execution is actually over.  */
   PROMPT_BLOCKED,

   /* The command finished; display the prompt before returning back to
      the top level.  */
   PROMPT_NEEDED,

   /* We've displayed the prompt already, ready for input.  */
   PROMPTED,
 ;

I think the end result is _much_ clearer than the current code, and,
it addresses the original motivation too.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* annotate.c: Include top.h.
	(async_background_execution_p): Delete.
	(print_value_flags): Check the UI's prompt state rather then
	async_background_execution_p.
	* event-loop.c (start_event_loop): Set the prompt state to
	PROMPT_NEEDED.
	* event-top.c (display_gdb_prompt, async_enable_stdin)
	(async_disable_stdin): Check the current UI's prompt state instead
	of the sync_execution global.
	(command_line_handler): Set the prompt state to PROMPT_NEEDED
	before running a command, and display the prompt if still needed
	afterwards.
	* infcall.c (struct call_thread_fsm) <waiting_ui>: New field.
	(new_call_thread_fsm): New parameter 'waiting_ui'.  Store it.
	(call_thread_fsm_should_stop): Set the prompt state to
	PROMPT_NEEDED.
	(run_inferior_call): Adjust to temporarily set the prompt state to
	PROMPT_BLOCKED instead of using the sync_execution global.
	(call_function_by_hand_dummy): Pass the current UI to
	new_call_thread_fsm.
	* infcmd.c: Include top.h.
	(continue_1): Check the current UI's prompt state instead of the
	sync_execution global.
	(continue_command): Validate global execution state before calling
	prepare_execution_command.
	(step_1): Call all_uis_check_sync_execution_done.
	(attach_post_wait): Don't call async_enable_stdin here.  Remove
	reference to sync_execution.
	* infrun.c (sync_execution): Delete global.
	(follow_fork_inferior)
	(reinstall_readline_callback_handler_cleanup): Check the current
	UI's prompt state instead of the sync_execution global.
	(check_curr_ui_sync_execution_done)
	(all_uis_check_sync_execution_done): New functions.
	(fetch_inferior_event): Call all_uis_check_sync_execution_done
	instead of trying to determine whether the global sync execution
	changed.
	(handle_no_resumed): Check the prompt state of all UIs.
	(normal_stop): Emit the no unwait-for even to all PROMPT_BLOCKED
	UIs.  Emit the "Switching to" notification to all UIs.  Enable
	stdin in all UIs.
	* infrun.h (sync_execution): Delete.
	(all_uis_check_sync_execution_done): Declare.
	* main.c (captured_command_loop): Don't call
	interp_pre_command_loop if the prompt is blocked.
	(catch_command_errors, catch_command_errors_const): Adjust.
	(captured_main): Set the initial prompt state to PROMPT_NEEDED.
	* mi/mi-interp.c (display_mi_prompt): Set the prompt state to
	PROMPTED.
	(mi_interpreter_resume): Don't clear sync_execution.  Remove hack
	comment.
	(mi_execute_command_input_handler): Set the prompt state to
	PROMPT_NEEDED before executing the command, and only display the
	prompt if the prompt state is PROMPT_NEEDED afterwards.
	(mi_on_resume_1): Adjust to check the prompt state.
	* target.c (target_terminal_inferior): Adjust to check the prompt
	state.
	* top.c (wait_sync_command_done, maybe_wait_sync_command_done)
	(execute_command): Check the current UI's prompt state instead of
	sync_execution.
	* top.h (enum prompt_state): New.
	(struct ui) <prompt_state>: New field.
	(ALL_UIS): New macro.
2016-06-21 01:11:51 +01:00

1288 lines
37 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Event loop machinery for GDB, the GNU debugger.
Copyright (C) 1999-2016 Free Software Foundation, Inc.
Written by Elena Zannoni <ezannoni@cygnus.com> of Cygnus Solutions.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "event-loop.h"
#include "event-top.h"
#include "queue.h"
#include "ser-event.h"
#ifdef HAVE_POLL
#if defined (HAVE_POLL_H)
#include <poll.h>
#elif defined (HAVE_SYS_POLL_H)
#include <sys/poll.h>
#endif
#endif
#include <sys/types.h>
#include "gdb_sys_time.h"
#include "gdb_select.h"
#include "observer.h"
#include "top.h"
/* Tell create_file_handler what events we are interested in.
This is used by the select version of the event loop. */
#define GDB_READABLE (1<<1)
#define GDB_WRITABLE (1<<2)
#define GDB_EXCEPTION (1<<3)
/* Data point to pass to the event handler. */
typedef union event_data
{
void *ptr;
int integer;
} event_data;
typedef struct gdb_event gdb_event;
typedef void (event_handler_func) (event_data);
/* Event for the GDB event system. Events are queued by calling
async_queue_event and serviced later on by gdb_do_one_event. An
event can be, for instance, a file descriptor becoming ready to be
read. Servicing an event simply means that the procedure PROC will
be called. We have 2 queues, one for file handlers that we listen
to in the event loop, and one for the file handlers+events that are
ready. The procedure PROC associated with each event is dependant
of the event source. In the case of monitored file descriptors, it
is always the same (handle_file_event). Its duty is to invoke the
handler associated with the file descriptor whose state change
generated the event, plus doing other cleanups and such. In the
case of async signal handlers, it is
invoke_async_signal_handler. */
typedef struct gdb_event
{
/* Procedure to call to service this event. */
event_handler_func *proc;
/* Data to pass to the event handler. */
event_data data;
} *gdb_event_p;
/* Information about each file descriptor we register with the event
loop. */
typedef struct file_handler
{
int fd; /* File descriptor. */
int mask; /* Events we want to monitor: POLLIN, etc. */
int ready_mask; /* Events that have been seen since
the last time. */
handler_func *proc; /* Procedure to call when fd is ready. */
gdb_client_data client_data; /* Argument to pass to proc. */
int error; /* Was an error detected on this fd? */
struct file_handler *next_file; /* Next registered file descriptor. */
}
file_handler;
/* PROC is a function to be invoked when the READY flag is set. This
happens when there has been a signal and the corresponding signal
handler has 'triggered' this async_signal_handler for execution.
The actual work to be done in response to a signal will be carried
out by PROC at a later time, within process_event. This provides a
deferred execution of signal handlers.
Async_init_signals takes care of setting up such an
async_signal_handler for each interesting signal. */
typedef struct async_signal_handler
{
int ready; /* If ready, call this handler
from the main event loop, using
invoke_async_handler. */
struct async_signal_handler *next_handler; /* Ptr to next handler. */
sig_handler_func *proc; /* Function to call to do the work. */
gdb_client_data client_data; /* Argument to async_handler_func. */
}
async_signal_handler;
/* PROC is a function to be invoked when the READY flag is set. This
happens when the event has been marked with
MARK_ASYNC_EVENT_HANDLER. The actual work to be done in response
to an event will be carried out by PROC at a later time, within
process_event. This provides a deferred execution of event
handlers. */
typedef struct async_event_handler
{
/* If ready, call this handler from the main event loop, using
invoke_event_handler. */
int ready;
/* Point to next handler. */
struct async_event_handler *next_handler;
/* Function to call to do the work. */
async_event_handler_func *proc;
/* Argument to PROC. */
gdb_client_data client_data;
}
async_event_handler;
/* Gdb_notifier is just a list of file descriptors gdb is interested in.
These are the input file descriptor, and the target file
descriptor. We have two flavors of the notifier, one for platforms
that have the POLL function, the other for those that don't, and
only support SELECT. Each of the elements in the gdb_notifier list is
basically a description of what kind of events gdb is interested
in, for each fd. */
/* As of 1999-04-30 only the input file descriptor is registered with the
event loop. */
/* Do we use poll or select ? */
#ifdef HAVE_POLL
#define USE_POLL 1
#else
#define USE_POLL 0
#endif /* HAVE_POLL */
static unsigned char use_poll = USE_POLL;
#ifdef USE_WIN32API
#include <windows.h>
#include <io.h>
#endif
static struct
{
/* Ptr to head of file handler list. */
file_handler *first_file_handler;
/* Next file handler to handle, for the select variant. To level
the fairness across event sources, we serve file handlers in a
round-robin-like fashion. The number and order of the polled
file handlers may change between invocations, but this is good
enough. */
file_handler *next_file_handler;
#ifdef HAVE_POLL
/* Ptr to array of pollfd structures. */
struct pollfd *poll_fds;
/* Next file descriptor to handle, for the poll variant. To level
the fairness across event sources, we poll the file descriptors
in a round-robin-like fashion. The number and order of the
polled file descriptors may change between invocations, but
this is good enough. */
int next_poll_fds_index;
/* Timeout in milliseconds for calls to poll(). */
int poll_timeout;
#endif
/* Masks to be used in the next call to select.
Bits are set in response to calls to create_file_handler. */
fd_set check_masks[3];
/* What file descriptors were found ready by select. */
fd_set ready_masks[3];
/* Number of file descriptors to monitor (for poll). */
/* Number of valid bits (highest fd value + 1) (for select). */
int num_fds;
/* Time structure for calls to select(). */
struct timeval select_timeout;
/* Flag to tell whether the timeout should be used. */
int timeout_valid;
}
gdb_notifier;
/* Structure associated with a timer. PROC will be executed at the
first occasion after WHEN. */
struct gdb_timer
{
struct timeval when;
int timer_id;
struct gdb_timer *next;
timer_handler_func *proc; /* Function to call to do the work. */
gdb_client_data client_data; /* Argument to async_handler_func. */
};
/* List of currently active timers. It is sorted in order of
increasing timers. */
static struct
{
/* Pointer to first in timer list. */
struct gdb_timer *first_timer;
/* Id of the last timer created. */
int num_timers;
}
timer_list;
/* All the async_signal_handlers gdb is interested in are kept onto
this list. */
static struct
{
/* Pointer to first in handler list. */
async_signal_handler *first_handler;
/* Pointer to last in handler list. */
async_signal_handler *last_handler;
}
sighandler_list;
/* All the async_event_handlers gdb is interested in are kept onto
this list. */
static struct
{
/* Pointer to first in handler list. */
async_event_handler *first_handler;
/* Pointer to last in handler list. */
async_event_handler *last_handler;
}
async_event_handler_list;
static int invoke_async_signal_handlers (void);
static void create_file_handler (int fd, int mask, handler_func *proc,
gdb_client_data client_data);
static int check_async_event_handlers (void);
static int gdb_wait_for_event (int);
static int update_wait_timeout (void);
static int poll_timers (void);
/* This event is signalled whenever an asynchronous handler needs to
defer an action to the event loop. */
static struct serial_event *async_signal_handlers_serial_event;
/* Callback registered with ASYNC_SIGNAL_HANDLERS_SERIAL_EVENT. */
static void
async_signals_handler (int error, gdb_client_data client_data)
{
/* Do nothing. Handlers are run by invoke_async_signal_handlers
from instead. */
}
void
initialize_async_signal_handlers (void)
{
async_signal_handlers_serial_event = make_serial_event ();
add_file_handler (serial_event_fd (async_signal_handlers_serial_event),
async_signals_handler, NULL);
}
/* Process one high level event. If nothing is ready at this time,
wait for something to happen (via gdb_wait_for_event), then process
it. Returns >0 if something was done otherwise returns <0 (this
can happen if there are no event sources to wait for). */
int
gdb_do_one_event (void)
{
static int event_source_head = 0;
const int number_of_sources = 3;
int current = 0;
/* First let's see if there are any asynchronous signal handlers
that are ready. These would be the result of invoking any of the
signal handlers. */
if (invoke_async_signal_handlers ())
return 1;
/* To level the fairness across event sources, we poll them in a
round-robin fashion. */
for (current = 0; current < number_of_sources; current++)
{
int res;
switch (event_source_head)
{
case 0:
/* Are any timers that are ready? */
res = poll_timers ();
break;
case 1:
/* Are there events already waiting to be collected on the
monitored file descriptors? */
res = gdb_wait_for_event (0);
break;
case 2:
/* Are there any asynchronous event handlers ready? */
res = check_async_event_handlers ();
break;
default:
internal_error (__FILE__, __LINE__,
"unexpected event_source_head %d",
event_source_head);
}
event_source_head++;
if (event_source_head == number_of_sources)
event_source_head = 0;
if (res > 0)
return 1;
}
/* Block waiting for a new event. If gdb_wait_for_event returns -1,
we should get out because this means that there are no event
sources left. This will make the event loop stop, and the
application exit. */
if (gdb_wait_for_event (1) < 0)
return -1;
/* If gdb_wait_for_event has returned 1, it means that one event has
been handled. We break out of the loop. */
return 1;
}
/* Start up the event loop. This is the entry point to the event loop
from the command loop. */
void
start_event_loop (void)
{
/* Loop until there is nothing to do. This is the entry point to
the event loop engine. gdb_do_one_event will process one event
for each invocation. It blocks waiting for an event and then
processes it. */
while (1)
{
int result = 0;
TRY
{
result = gdb_do_one_event ();
}
CATCH (ex, RETURN_MASK_ALL)
{
exception_print (gdb_stderr, ex);
/* If any exception escaped to here, we better enable
stdin. Otherwise, any command that calls async_disable_stdin,
and then throws, will leave stdin inoperable. */
async_enable_stdin ();
/* If we long-jumped out of do_one_event, we probably didn't
get around to resetting the prompt, which leaves readline
in a messed-up state. Reset it here. */
current_ui->prompt_state = PROMPT_NEEDED;
observer_notify_command_error ();
/* This call looks bizarre, but it is required. If the user
entered a command that caused an error,
after_char_processing_hook won't be called from
rl_callback_read_char_wrapper. Using a cleanup there
won't work, since we want this function to be called
after a new prompt is printed. */
if (after_char_processing_hook)
(*after_char_processing_hook) ();
/* Maybe better to set a flag to be checked somewhere as to
whether display the prompt or not. */
}
END_CATCH
if (result < 0)
break;
}
/* We are done with the event loop. There are no more event sources
to listen to. So we exit GDB. */
return;
}
/* Wrapper function for create_file_handler, so that the caller
doesn't have to know implementation details about the use of poll
vs. select. */
void
add_file_handler (int fd, handler_func * proc, gdb_client_data client_data)
{
#ifdef HAVE_POLL
struct pollfd fds;
#endif
if (use_poll)
{
#ifdef HAVE_POLL
/* Check to see if poll () is usable. If not, we'll switch to
use select. This can happen on systems like
m68k-motorola-sys, `poll' cannot be used to wait for `stdin'.
On m68k-motorola-sysv, tty's are not stream-based and not
`poll'able. */
fds.fd = fd;
fds.events = POLLIN;
if (poll (&fds, 1, 0) == 1 && (fds.revents & POLLNVAL))
use_poll = 0;
#else
internal_error (__FILE__, __LINE__,
_("use_poll without HAVE_POLL"));
#endif /* HAVE_POLL */
}
if (use_poll)
{
#ifdef HAVE_POLL
create_file_handler (fd, POLLIN, proc, client_data);
#else
internal_error (__FILE__, __LINE__,
_("use_poll without HAVE_POLL"));
#endif
}
else
create_file_handler (fd, GDB_READABLE | GDB_EXCEPTION,
proc, client_data);
}
/* Add a file handler/descriptor to the list of descriptors we are
interested in.
FD is the file descriptor for the file/stream to be listened to.
For the poll case, MASK is a combination (OR) of POLLIN,
POLLRDNORM, POLLRDBAND, POLLPRI, POLLOUT, POLLWRNORM, POLLWRBAND:
these are the events we are interested in. If any of them occurs,
proc should be called.
For the select case, MASK is a combination of READABLE, WRITABLE,
EXCEPTION. PROC is the procedure that will be called when an event
occurs for FD. CLIENT_DATA is the argument to pass to PROC. */
static void
create_file_handler (int fd, int mask, handler_func * proc,
gdb_client_data client_data)
{
file_handler *file_ptr;
/* Do we already have a file handler for this file? (We may be
changing its associated procedure). */
for (file_ptr = gdb_notifier.first_file_handler; file_ptr != NULL;
file_ptr = file_ptr->next_file)
{
if (file_ptr->fd == fd)
break;
}
/* It is a new file descriptor. Add it to the list. Otherwise, just
change the data associated with it. */
if (file_ptr == NULL)
{
file_ptr = XNEW (file_handler);
file_ptr->fd = fd;
file_ptr->ready_mask = 0;
file_ptr->next_file = gdb_notifier.first_file_handler;
gdb_notifier.first_file_handler = file_ptr;
if (use_poll)
{
#ifdef HAVE_POLL
gdb_notifier.num_fds++;
if (gdb_notifier.poll_fds)
gdb_notifier.poll_fds =
(struct pollfd *) xrealloc (gdb_notifier.poll_fds,
(gdb_notifier.num_fds
* sizeof (struct pollfd)));
else
gdb_notifier.poll_fds =
XNEW (struct pollfd);
(gdb_notifier.poll_fds + gdb_notifier.num_fds - 1)->fd = fd;
(gdb_notifier.poll_fds + gdb_notifier.num_fds - 1)->events = mask;
(gdb_notifier.poll_fds + gdb_notifier.num_fds - 1)->revents = 0;
#else
internal_error (__FILE__, __LINE__,
_("use_poll without HAVE_POLL"));
#endif /* HAVE_POLL */
}
else
{
if (mask & GDB_READABLE)
FD_SET (fd, &gdb_notifier.check_masks[0]);
else
FD_CLR (fd, &gdb_notifier.check_masks[0]);
if (mask & GDB_WRITABLE)
FD_SET (fd, &gdb_notifier.check_masks[1]);
else
FD_CLR (fd, &gdb_notifier.check_masks[1]);
if (mask & GDB_EXCEPTION)
FD_SET (fd, &gdb_notifier.check_masks[2]);
else
FD_CLR (fd, &gdb_notifier.check_masks[2]);
if (gdb_notifier.num_fds <= fd)
gdb_notifier.num_fds = fd + 1;
}
}
file_ptr->proc = proc;
file_ptr->client_data = client_data;
file_ptr->mask = mask;
}
/* Return the next file handler to handle, and advance to the next
file handler, wrapping around if the end of the list is
reached. */
static file_handler *
get_next_file_handler_to_handle_and_advance (void)
{
file_handler *curr_next;
/* The first time around, this is still NULL. */
if (gdb_notifier.next_file_handler == NULL)
gdb_notifier.next_file_handler = gdb_notifier.first_file_handler;
curr_next = gdb_notifier.next_file_handler;
gdb_assert (curr_next != NULL);
/* Advance. */
gdb_notifier.next_file_handler = curr_next->next_file;
/* Wrap around, if necessary. */
if (gdb_notifier.next_file_handler == NULL)
gdb_notifier.next_file_handler = gdb_notifier.first_file_handler;
return curr_next;
}
/* Remove the file descriptor FD from the list of monitored fd's:
i.e. we don't care anymore about events on the FD. */
void
delete_file_handler (int fd)
{
file_handler *file_ptr, *prev_ptr = NULL;
int i;
#ifdef HAVE_POLL
int j;
struct pollfd *new_poll_fds;
#endif
/* Find the entry for the given file. */
for (file_ptr = gdb_notifier.first_file_handler; file_ptr != NULL;
file_ptr = file_ptr->next_file)
{
if (file_ptr->fd == fd)
break;
}
if (file_ptr == NULL)
return;
if (use_poll)
{
#ifdef HAVE_POLL
/* Create a new poll_fds array by copying every fd's information
but the one we want to get rid of. */
new_poll_fds = (struct pollfd *)
xmalloc ((gdb_notifier.num_fds - 1) * sizeof (struct pollfd));
for (i = 0, j = 0; i < gdb_notifier.num_fds; i++)
{
if ((gdb_notifier.poll_fds + i)->fd != fd)
{
(new_poll_fds + j)->fd = (gdb_notifier.poll_fds + i)->fd;
(new_poll_fds + j)->events = (gdb_notifier.poll_fds + i)->events;
(new_poll_fds + j)->revents
= (gdb_notifier.poll_fds + i)->revents;
j++;
}
}
xfree (gdb_notifier.poll_fds);
gdb_notifier.poll_fds = new_poll_fds;
gdb_notifier.num_fds--;
#else
internal_error (__FILE__, __LINE__,
_("use_poll without HAVE_POLL"));
#endif /* HAVE_POLL */
}
else
{
if (file_ptr->mask & GDB_READABLE)
FD_CLR (fd, &gdb_notifier.check_masks[0]);
if (file_ptr->mask & GDB_WRITABLE)
FD_CLR (fd, &gdb_notifier.check_masks[1]);
if (file_ptr->mask & GDB_EXCEPTION)
FD_CLR (fd, &gdb_notifier.check_masks[2]);
/* Find current max fd. */
if ((fd + 1) == gdb_notifier.num_fds)
{
gdb_notifier.num_fds--;
for (i = gdb_notifier.num_fds; i; i--)
{
if (FD_ISSET (i - 1, &gdb_notifier.check_masks[0])
|| FD_ISSET (i - 1, &gdb_notifier.check_masks[1])
|| FD_ISSET (i - 1, &gdb_notifier.check_masks[2]))
break;
}
gdb_notifier.num_fds = i;
}
}
/* Deactivate the file descriptor, by clearing its mask,
so that it will not fire again. */
file_ptr->mask = 0;
/* If this file handler was going to be the next one to be handled,
advance to the next's next, if any. */
if (gdb_notifier.next_file_handler == file_ptr)
{
if (file_ptr->next_file == NULL
&& file_ptr == gdb_notifier.first_file_handler)
gdb_notifier.next_file_handler = NULL;
else
get_next_file_handler_to_handle_and_advance ();
}
/* Get rid of the file handler in the file handler list. */
if (file_ptr == gdb_notifier.first_file_handler)
gdb_notifier.first_file_handler = file_ptr->next_file;
else
{
for (prev_ptr = gdb_notifier.first_file_handler;
prev_ptr->next_file != file_ptr;
prev_ptr = prev_ptr->next_file)
;
prev_ptr->next_file = file_ptr->next_file;
}
xfree (file_ptr);
}
/* Handle the given event by calling the procedure associated to the
corresponding file handler. */
static void
handle_file_event (file_handler *file_ptr, int ready_mask)
{
int mask;
#ifdef HAVE_POLL
int error_mask;
#endif
{
{
/* With poll, the ready_mask could have any of three events
set to 1: POLLHUP, POLLERR, POLLNVAL. These events
cannot be used in the requested event mask (events), but
they can be returned in the return mask (revents). We
need to check for those event too, and add them to the
mask which will be passed to the handler. */
/* See if the desired events (mask) match the received
events (ready_mask). */
if (use_poll)
{
#ifdef HAVE_POLL
/* POLLHUP means EOF, but can be combined with POLLIN to
signal more data to read. */
error_mask = POLLHUP | POLLERR | POLLNVAL;
mask = ready_mask & (file_ptr->mask | error_mask);
if ((mask & (POLLERR | POLLNVAL)) != 0)
{
/* Work in progress. We may need to tell somebody
what kind of error we had. */
if (mask & POLLERR)
printf_unfiltered (_("Error detected on fd %d\n"),
file_ptr->fd);
if (mask & POLLNVAL)
printf_unfiltered (_("Invalid or non-`poll'able fd %d\n"),
file_ptr->fd);
file_ptr->error = 1;
}
else
file_ptr->error = 0;
#else
internal_error (__FILE__, __LINE__,
_("use_poll without HAVE_POLL"));
#endif /* HAVE_POLL */
}
else
{
if (ready_mask & GDB_EXCEPTION)
{
printf_unfiltered (_("Exception condition detected "
"on fd %d\n"), file_ptr->fd);
file_ptr->error = 1;
}
else
file_ptr->error = 0;
mask = ready_mask & file_ptr->mask;
}
/* If there was a match, then call the handler. */
if (mask != 0)
(*file_ptr->proc) (file_ptr->error, file_ptr->client_data);
}
}
}
/* Wait for new events on the monitored file descriptors. Run the
event handler if the first descriptor that is detected by the poll.
If BLOCK and if there are no events, this function will block in
the call to poll. Return 1 if an event was handled. Return -1 if
there are no file descriptors to monitor. Return 1 if an event was
handled, otherwise returns 0. */
static int
gdb_wait_for_event (int block)
{
file_handler *file_ptr;
int num_found = 0;
/* Make sure all output is done before getting another event. */
gdb_flush (gdb_stdout);
gdb_flush (gdb_stderr);
if (gdb_notifier.num_fds == 0)
return -1;
if (block)
update_wait_timeout ();
if (use_poll)
{
#ifdef HAVE_POLL
int timeout;
if (block)
timeout = gdb_notifier.timeout_valid ? gdb_notifier.poll_timeout : -1;
else
timeout = 0;
num_found = poll (gdb_notifier.poll_fds,
(unsigned long) gdb_notifier.num_fds, timeout);
/* Don't print anything if we get out of poll because of a
signal. */
if (num_found == -1 && errno != EINTR)
perror_with_name (("poll"));
#else
internal_error (__FILE__, __LINE__,
_("use_poll without HAVE_POLL"));
#endif /* HAVE_POLL */
}
else
{
struct timeval select_timeout;
struct timeval *timeout_p;
if (block)
timeout_p = gdb_notifier.timeout_valid
? &gdb_notifier.select_timeout : NULL;
else
{
memset (&select_timeout, 0, sizeof (select_timeout));
timeout_p = &select_timeout;
}
gdb_notifier.ready_masks[0] = gdb_notifier.check_masks[0];
gdb_notifier.ready_masks[1] = gdb_notifier.check_masks[1];
gdb_notifier.ready_masks[2] = gdb_notifier.check_masks[2];
num_found = gdb_select (gdb_notifier.num_fds,
&gdb_notifier.ready_masks[0],
&gdb_notifier.ready_masks[1],
&gdb_notifier.ready_masks[2],
timeout_p);
/* Clear the masks after an error from select. */
if (num_found == -1)
{
FD_ZERO (&gdb_notifier.ready_masks[0]);
FD_ZERO (&gdb_notifier.ready_masks[1]);
FD_ZERO (&gdb_notifier.ready_masks[2]);
/* Dont print anything if we got a signal, let gdb handle
it. */
if (errno != EINTR)
perror_with_name (("select"));
}
}
/* Avoid looking at poll_fds[i]->revents if no event fired. */
if (num_found <= 0)
return 0;
/* Run event handlers. We always run just one handler and go back
to polling, in case a handler changes the notifier list. Since
events for sources we haven't consumed yet wake poll/select
immediately, no event is lost. */
/* To level the fairness across event descriptors, we handle them in
a round-robin-like fashion. The number and order of descriptors
may change between invocations, but this is good enough. */
if (use_poll)
{
#ifdef HAVE_POLL
int i;
int mask;
while (1)
{
if (gdb_notifier.next_poll_fds_index >= gdb_notifier.num_fds)
gdb_notifier.next_poll_fds_index = 0;
i = gdb_notifier.next_poll_fds_index++;
gdb_assert (i < gdb_notifier.num_fds);
if ((gdb_notifier.poll_fds + i)->revents)
break;
}
for (file_ptr = gdb_notifier.first_file_handler;
file_ptr != NULL;
file_ptr = file_ptr->next_file)
{
if (file_ptr->fd == (gdb_notifier.poll_fds + i)->fd)
break;
}
gdb_assert (file_ptr != NULL);
mask = (gdb_notifier.poll_fds + i)->revents;
handle_file_event (file_ptr, mask);
return 1;
#else
internal_error (__FILE__, __LINE__,
_("use_poll without HAVE_POLL"));
#endif /* HAVE_POLL */
}
else
{
/* See comment about even source fairness above. */
int mask = 0;
do
{
file_ptr = get_next_file_handler_to_handle_and_advance ();
if (FD_ISSET (file_ptr->fd, &gdb_notifier.ready_masks[0]))
mask |= GDB_READABLE;
if (FD_ISSET (file_ptr->fd, &gdb_notifier.ready_masks[1]))
mask |= GDB_WRITABLE;
if (FD_ISSET (file_ptr->fd, &gdb_notifier.ready_masks[2]))
mask |= GDB_EXCEPTION;
}
while (mask == 0);
handle_file_event (file_ptr, mask);
return 1;
}
return 0;
}
/* Create an asynchronous handler, allocating memory for it.
Return a pointer to the newly created handler.
This pointer will be used to invoke the handler by
invoke_async_signal_handler.
PROC is the function to call with CLIENT_DATA argument
whenever the handler is invoked. */
async_signal_handler *
create_async_signal_handler (sig_handler_func * proc,
gdb_client_data client_data)
{
async_signal_handler *async_handler_ptr;
async_handler_ptr = XNEW (async_signal_handler);
async_handler_ptr->ready = 0;
async_handler_ptr->next_handler = NULL;
async_handler_ptr->proc = proc;
async_handler_ptr->client_data = client_data;
if (sighandler_list.first_handler == NULL)
sighandler_list.first_handler = async_handler_ptr;
else
sighandler_list.last_handler->next_handler = async_handler_ptr;
sighandler_list.last_handler = async_handler_ptr;
return async_handler_ptr;
}
/* Mark the handler (ASYNC_HANDLER_PTR) as ready. This information
will be used when the handlers are invoked, after we have waited
for some event. The caller of this function is the interrupt
handler associated with a signal. */
void
mark_async_signal_handler (async_signal_handler * async_handler_ptr)
{
async_handler_ptr->ready = 1;
serial_event_set (async_signal_handlers_serial_event);
}
/* See event-loop.h. */
void
clear_async_signal_handler (async_signal_handler *async_handler_ptr)
{
async_handler_ptr->ready = 0;
}
/* See event-loop.h. */
int
async_signal_handler_is_marked (async_signal_handler *async_handler_ptr)
{
return async_handler_ptr->ready;
}
/* Call all the handlers that are ready. Returns true if any was
indeed ready. */
static int
invoke_async_signal_handlers (void)
{
async_signal_handler *async_handler_ptr;
int any_ready = 0;
/* We're going to handle all pending signals, so no need to wake up
the event loop again the next time around. Note this must be
cleared _before_ calling the callbacks, to avoid races. */
serial_event_clear (async_signal_handlers_serial_event);
/* Invoke all ready handlers. */
while (1)
{
for (async_handler_ptr = sighandler_list.first_handler;
async_handler_ptr != NULL;
async_handler_ptr = async_handler_ptr->next_handler)
{
if (async_handler_ptr->ready)
break;
}
if (async_handler_ptr == NULL)
break;
any_ready = 1;
async_handler_ptr->ready = 0;
/* Async signal handlers have no connection to whichever was the
current UI, and thus always run on the main one. */
current_ui = main_ui;
(*async_handler_ptr->proc) (async_handler_ptr->client_data);
}
return any_ready;
}
/* Delete an asynchronous handler (ASYNC_HANDLER_PTR).
Free the space allocated for it. */
void
delete_async_signal_handler (async_signal_handler ** async_handler_ptr)
{
async_signal_handler *prev_ptr;
if (sighandler_list.first_handler == (*async_handler_ptr))
{
sighandler_list.first_handler = (*async_handler_ptr)->next_handler;
if (sighandler_list.first_handler == NULL)
sighandler_list.last_handler = NULL;
}
else
{
prev_ptr = sighandler_list.first_handler;
while (prev_ptr && prev_ptr->next_handler != (*async_handler_ptr))
prev_ptr = prev_ptr->next_handler;
gdb_assert (prev_ptr);
prev_ptr->next_handler = (*async_handler_ptr)->next_handler;
if (sighandler_list.last_handler == (*async_handler_ptr))
sighandler_list.last_handler = prev_ptr;
}
xfree ((*async_handler_ptr));
(*async_handler_ptr) = NULL;
}
/* Create an asynchronous event handler, allocating memory for it.
Return a pointer to the newly created handler. PROC is the
function to call with CLIENT_DATA argument whenever the handler is
invoked. */
async_event_handler *
create_async_event_handler (async_event_handler_func *proc,
gdb_client_data client_data)
{
async_event_handler *h;
h = XNEW (struct async_event_handler);
h->ready = 0;
h->next_handler = NULL;
h->proc = proc;
h->client_data = client_data;
if (async_event_handler_list.first_handler == NULL)
async_event_handler_list.first_handler = h;
else
async_event_handler_list.last_handler->next_handler = h;
async_event_handler_list.last_handler = h;
return h;
}
/* Mark the handler (ASYNC_HANDLER_PTR) as ready. This information
will be used by gdb_do_one_event. The caller will be whoever
created the event source, and wants to signal that the event is
ready to be handled. */
void
mark_async_event_handler (async_event_handler *async_handler_ptr)
{
async_handler_ptr->ready = 1;
}
/* See event-loop.h. */
void
clear_async_event_handler (async_event_handler *async_handler_ptr)
{
async_handler_ptr->ready = 0;
}
/* Check if asynchronous event handlers are ready, and call the
handler function for one that is. */
static int
check_async_event_handlers (void)
{
async_event_handler *async_handler_ptr;
for (async_handler_ptr = async_event_handler_list.first_handler;
async_handler_ptr != NULL;
async_handler_ptr = async_handler_ptr->next_handler)
{
if (async_handler_ptr->ready)
{
async_handler_ptr->ready = 0;
(*async_handler_ptr->proc) (async_handler_ptr->client_data);
return 1;
}
}
return 0;
}
/* Delete an asynchronous handler (ASYNC_HANDLER_PTR).
Free the space allocated for it. */
void
delete_async_event_handler (async_event_handler **async_handler_ptr)
{
async_event_handler *prev_ptr;
if (async_event_handler_list.first_handler == *async_handler_ptr)
{
async_event_handler_list.first_handler
= (*async_handler_ptr)->next_handler;
if (async_event_handler_list.first_handler == NULL)
async_event_handler_list.last_handler = NULL;
}
else
{
prev_ptr = async_event_handler_list.first_handler;
while (prev_ptr && prev_ptr->next_handler != *async_handler_ptr)
prev_ptr = prev_ptr->next_handler;
gdb_assert (prev_ptr);
prev_ptr->next_handler = (*async_handler_ptr)->next_handler;
if (async_event_handler_list.last_handler == (*async_handler_ptr))
async_event_handler_list.last_handler = prev_ptr;
}
xfree (*async_handler_ptr);
*async_handler_ptr = NULL;
}
/* Create a timer that will expire in MILLISECONDS from now. When the
timer is ready, PROC will be executed. At creation, the timer is
aded to the timers queue. This queue is kept sorted in order of
increasing timers. Return a handle to the timer struct. */
int
create_timer (int milliseconds, timer_handler_func * proc,
gdb_client_data client_data)
{
struct gdb_timer *timer_ptr, *timer_index, *prev_timer;
struct timeval time_now, delta;
/* Compute seconds. */
delta.tv_sec = milliseconds / 1000;
/* Compute microseconds. */
delta.tv_usec = (milliseconds % 1000) * 1000;
gettimeofday (&time_now, NULL);
timer_ptr = XNEW (struct gdb_timer);
timer_ptr->when.tv_sec = time_now.tv_sec + delta.tv_sec;
timer_ptr->when.tv_usec = time_now.tv_usec + delta.tv_usec;
/* Carry? */
if (timer_ptr->when.tv_usec >= 1000000)
{
timer_ptr->when.tv_sec += 1;
timer_ptr->when.tv_usec -= 1000000;
}
timer_ptr->proc = proc;
timer_ptr->client_data = client_data;
timer_list.num_timers++;
timer_ptr->timer_id = timer_list.num_timers;
/* Now add the timer to the timer queue, making sure it is sorted in
increasing order of expiration. */
for (timer_index = timer_list.first_timer;
timer_index != NULL;
timer_index = timer_index->next)
{
/* If the seconds field is greater or if it is the same, but the
microsecond field is greater. */
if ((timer_index->when.tv_sec > timer_ptr->when.tv_sec)
|| ((timer_index->when.tv_sec == timer_ptr->when.tv_sec)
&& (timer_index->when.tv_usec > timer_ptr->when.tv_usec)))
break;
}
if (timer_index == timer_list.first_timer)
{
timer_ptr->next = timer_list.first_timer;
timer_list.first_timer = timer_ptr;
}
else
{
for (prev_timer = timer_list.first_timer;
prev_timer->next != timer_index;
prev_timer = prev_timer->next)
;
prev_timer->next = timer_ptr;
timer_ptr->next = timer_index;
}
gdb_notifier.timeout_valid = 0;
return timer_ptr->timer_id;
}
/* There is a chance that the creator of the timer wants to get rid of
it before it expires. */
void
delete_timer (int id)
{
struct gdb_timer *timer_ptr, *prev_timer = NULL;
/* Find the entry for the given timer. */
for (timer_ptr = timer_list.first_timer; timer_ptr != NULL;
timer_ptr = timer_ptr->next)
{
if (timer_ptr->timer_id == id)
break;
}
if (timer_ptr == NULL)
return;
/* Get rid of the timer in the timer list. */
if (timer_ptr == timer_list.first_timer)
timer_list.first_timer = timer_ptr->next;
else
{
for (prev_timer = timer_list.first_timer;
prev_timer->next != timer_ptr;
prev_timer = prev_timer->next)
;
prev_timer->next = timer_ptr->next;
}
xfree (timer_ptr);
gdb_notifier.timeout_valid = 0;
}
/* Update the timeout for the select() or poll(). Returns true if the
timer has already expired, false otherwise. */
static int
update_wait_timeout (void)
{
struct timeval time_now, delta;
if (timer_list.first_timer != NULL)
{
gettimeofday (&time_now, NULL);
delta.tv_sec = timer_list.first_timer->when.tv_sec - time_now.tv_sec;
delta.tv_usec = timer_list.first_timer->when.tv_usec - time_now.tv_usec;
/* Borrow? */
if (delta.tv_usec < 0)
{
delta.tv_sec -= 1;
delta.tv_usec += 1000000;
}
/* Cannot simply test if delta.tv_sec is negative because time_t
might be unsigned. */
if (timer_list.first_timer->when.tv_sec < time_now.tv_sec
|| (timer_list.first_timer->when.tv_sec == time_now.tv_sec
&& timer_list.first_timer->when.tv_usec < time_now.tv_usec))
{
/* It expired already. */
delta.tv_sec = 0;
delta.tv_usec = 0;
}
/* Update the timeout for select/ poll. */
if (use_poll)
{
#ifdef HAVE_POLL
gdb_notifier.poll_timeout = delta.tv_sec * 1000;
#else
internal_error (__FILE__, __LINE__,
_("use_poll without HAVE_POLL"));
#endif /* HAVE_POLL */
}
else
{
gdb_notifier.select_timeout.tv_sec = delta.tv_sec;
gdb_notifier.select_timeout.tv_usec = delta.tv_usec;
}
gdb_notifier.timeout_valid = 1;
if (delta.tv_sec == 0 && delta.tv_usec == 0)
return 1;
}
else
gdb_notifier.timeout_valid = 0;
return 0;
}
/* Check whether a timer in the timers queue is ready. If a timer is
ready, call its handler and return. Update the timeout for the
select() or poll() as well. Return 1 if an event was handled,
otherwise returns 0.*/
static int
poll_timers (void)
{
if (update_wait_timeout ())
{
struct gdb_timer *timer_ptr = timer_list.first_timer;
timer_handler_func *proc = timer_ptr->proc;
gdb_client_data client_data = timer_ptr->client_data;
/* Get rid of the timer from the beginning of the list. */
timer_list.first_timer = timer_ptr->next;
/* Delete the timer before calling the callback, not after, in
case the callback itself decides to try deleting the timer
too. */
xfree (timer_ptr);
/* Call the procedure associated with that timer. */
(proc) (client_data);
return 1;
}
return 0;
}