# Copyright 2000-2014 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# This file is based on config/gdbserver.exp, which was written by
# Michael Snyder (msnyder@redhat.com).

#
# To be addressed or set in your baseboard config file:
#
#   set_board_info gdb_protocol "remote"
#	Unles you have a gdbserver that uses a different protocol...
#	After GDB starts you should check global $gdbserver_protocol instead as
#	the testfile may force a specific different target protocol itself.
#
#   set_board_info gdb_server_prog
#	This will be the path to the gdbserver program you want to test.
#	Defaults to "gdbserver".
#
#   set_board_info sockethost
#	The name of the host computer whose socket is being used.
#	Defaults to "localhost".  Note: old gdbserver requires 
#	that you define this, but libremote/gdbserver does not.
#
#   set_board_info gdb,socketport
#	Port id to use for socket connection.  If not set explicitly,
#	it will start at "2345" and increment for each use.
#	After GDB starts you should check global $gdbserver_gdbport for the
#	real port used.  It is not useful if $gdbserver_reconnect_p was not set.
#

#
# gdb_target_cmd
# Send gdb the "target" command
#
proc gdb_target_cmd { targetname serialport } {
    global gdb_prompt

    set serialport_re [string_to_regexp $serialport]
    for {set i 1} {$i <= 3} {incr i} {
	send_gdb "target $targetname $serialport\n"
	gdb_expect 60 {
	    -re "A program is being debugged already.*ill it.*y or n. $" {
		send_gdb "y\n"
		exp_continue
	    }
	    -re "unknown host.*$gdb_prompt" {
	        verbose "Couldn't look up $serialport"
	    }
	    -re "Couldn't establish connection to remote.*$gdb_prompt $" {
		verbose "Connection failed"
	    }
	    -re "Remote MIPS debugging.*$gdb_prompt" {
		verbose "Set target to $targetname"
		return 0
	    }
	    -re "Remote debugging using .*$serialport_re.*$gdb_prompt $" {
		verbose "Set target to $targetname"
		return 0
	    }
	    -re "Remote debugging using stdio.*$gdb_prompt $" {
		verbose "Set target to $targetname"
		return 0
	    }
	    -re "Remote target $targetname connected to.*$gdb_prompt $" {
		verbose "Set target to $targetname"
		return 0
	    }
	    -re "Connected to.*$gdb_prompt $" { 
		verbose "Set target to $targetname"
		return 0
	    }
	    -re "Ending remote.*$gdb_prompt $" { }
	    -re "Connection refused.*$gdb_prompt $" {
		verbose "Connection refused by remote target.  Pausing, and trying again."
		sleep 30
		continue
	    }
	    -re "Timeout reading from remote system.*$gdb_prompt $" {
		verbose "Got timeout error from gdb."
	    }
	    -notransfer -re "Remote debugging using .*\r\n> $" {
		# We got an unexpected prompt while creating the target.
		# Leave it there for the test to diagnose.
		return 1
	    }
	    timeout {
		send_gdb ""
		break
	    }
	}
    }
    return 1
}


global portnum
set portnum "2345"

# Locate the gdbserver binary.  Returns "" if gdbserver could not be found.

proc find_gdbserver { } {
  global GDB
  global GDBSERVER

  if [info exists GDBSERVER] {
    return ${GDBSERVER}
  }

  if [target_info exists gdb_server_prog] {
    return [target_info gdb_server_prog]
  }

  set gdbserver "${GDB}server"
  if { [file isdirectory $gdbserver] } {
    append gdbserver "/gdbserver"
  }

  if { [file executable $gdbserver] } {
    return $gdbserver
  }

  return ""
}

# Return non-zero if we should skip gdbserver-specific tests.

proc skip_gdbserver_tests { } {
  if { [find_gdbserver] == "" } {
    return 1
  }

  return 0
}

# Download the currently loaded program to the target if necessary.
# Return the target system filename.
# NOTE: This was named "gdbserver_download", but that collides with the
# dejagnu "download" API function when using load_generic_config "gdbserver".

proc gdbserver_download_current_prog { } {
    global gdbserver_host_exec
    global gdbserver_host_mtime
    global gdbserver_server_exec
    global last_loaded_file

    set host_exec $last_loaded_file

    # If we already downloaded a file to the target, see if we can reuse it.
    set reuse 0
    if { [info exists gdbserver_server_exec] } {
	set reuse 1

	# If the file has changed, we can not.
	if { $host_exec != $gdbserver_host_exec } {
	    set reuse 0
	}

	# If the mtime has changed, we can not.
	if { [file mtime $host_exec] != $gdbserver_host_mtime } {
	    set reuse 0
	}
    }

    if { $reuse == 0 } {
	set gdbserver_host_exec $host_exec
	set gdbserver_host_mtime [file mtime $host_exec]
	if [is_remote target] {
	    set gdbserver_server_exec [gdb_download $host_exec]
	} else {
	    set gdbserver_server_exec $host_exec
	}
    }

    return $gdbserver_server_exec
}

# Default routine to compute the argument to "target remote".

proc gdbserver_default_get_remote_address { host port } {
    # Historically HOST included the trailing ":".
    # To avoid breaking any board files out there we leave things alone.
    return "$host$port"
}

# Default routine to compute the "comm" argument for gdbserver.

proc gdbserver_default_get_comm_port { port } {
    return ":$port"
}

# Start a gdbserver process with initial OPTIONS and trailing ARGUMENTS.
# The port will be filled in between them automatically.
#
# Returns the target protocol and socket to connect to.

proc gdbserver_start { options arguments } {
    global portnum

    # Port id -- either specified in baseboard file, or managed here.
    if [target_info exists gdb,socketport] {
	set portnum [target_info gdb,socketport]
    } else {
	# Bump the port number to avoid conflicts with hung ports.
	incr portnum
    }

    # Extract the local and remote host ids from the target board struct.
    if [target_info exists sockethost] {
	set debughost [target_info sockethost]
    } else {
	set debughost "localhost:"
    }

    # Some boards use a different value for the port that is passed to
    # gdbserver and the port that is passed to the "target remote" command.
    # One example is the stdio gdbserver support.
    if [target_info exists gdb,get_remote_address] {
	set get_remote_address [target_info gdb,get_remote_address]
    } else {
	set get_remote_address gdbserver_default_get_remote_address
    }
    if [target_info exists gdbserver,get_comm_port] {
	set get_comm_port [target_info gdbserver,get_comm_port]
    } else {
	set get_comm_port gdbserver_default_get_comm_port
    }

    # Extract the protocol
    if [target_info exists gdb_protocol] {
	set protocol [target_info gdb_protocol]
    } else {
	set protocol "remote"
    }

    set gdbserver [find_gdbserver]

    # Loop till we find a free port.
    while 1 {
	# Fire off the debug agent.
	set gdbserver_command "$gdbserver"

	# If gdbserver_reconnect will be called $gdbserver_reconnect_p must be
	# set to true already during gdbserver_start.
	global gdbserver_reconnect_p
	if {![info exists gdbserver_reconnect_p] || !$gdbserver_reconnect_p} {
	    # GDB client could accidentally connect to a stale server.
	    # append gdbserver_command " --debug --once"
	    append gdbserver_command " --once"
	}

	if { $options != "" } {
	    append gdbserver_command " $options"
	}
	if { $portnum != "" } {
	    append gdbserver_command " [$get_comm_port $portnum]"
	}
	if { $arguments != "" } {
	    append gdbserver_command " $arguments"
	}

	set server_spawn_id [remote_spawn target $gdbserver_command]

	# Wait for the server to open its TCP socket, so that GDB can connect.
	expect {
	    -i $server_spawn_id
	    -notransfer
	    -re "Listening on" { }
	    -re "Can't bind address: Address already in use\\.\r\n" {
		verbose -log "Port $portnum is already in use."
		if ![target_info exists gdb,socketport] {
		    # Bump the port number to avoid the conflict.
		    wait -i $expect_out(spawn_id)
		    incr portnum
		    continue
		}
	    }
	}
	break
    }

    # We can't just call close, because if gdbserver is local then that means
    # that it will get a SIGHUP.  Doing it this way could also allow us to
    # get at the inferior's input or output if necessary, and means that we
    # don't need to redirect output.
    expect_background {
	-i $server_spawn_id
	full_buffer { }
	eof {
	    # The spawn ID is already closed now (but not yet waited for).
	    wait -i $expect_out(spawn_id)
	}
    }

    return [list $protocol [$get_remote_address $debughost $portnum]]
}

# Start a gdbserver process running SERVER_EXEC, and connect GDB
# to it.  CHILD_ARGS are passed to the inferior.
#
# Returns the target protocol and socket to connect to.

proc gdbserver_spawn { child_args } {
    set target_exec [gdbserver_download_current_prog]

    # Fire off the debug agent.  This flavour of gdbserver takes as
    # arguments the port information, the name of the executable file to
    # be debugged, and any arguments.
    set arguments "$target_exec"
    if { $child_args != "" } {
	append arguments " $child_args"
    }
    return [gdbserver_start "" $arguments]
}

# Start a gdbserver process running HOST_EXEC and pass CHILD_ARGS
# to it.  Return 0 on success, or non-zero on failure.

proc gdbserver_run { child_args } {
    global gdbserver_protocol
    global gdbserver_gdbport

    # Kill anything running before we try to start gdbserver, in case
    # we are sharing a serial connection.
    global gdb_prompt
    send_gdb "kill\n"
    gdb_expect 120 {
	-re "Kill the program being debugged. .y or n. $" {
	    send_gdb "y\n"
	    verbose "\t\tKilling previous program being debugged"
	    exp_continue
	}
	-re "$gdb_prompt $" {
	    # OK.
	}
    }

    set res [gdbserver_spawn $child_args]
    set gdbserver_protocol [lindex $res 0]
    set gdbserver_gdbport [lindex $res 1]

    return [gdb_target_cmd $gdbserver_protocol $gdbserver_gdbport]
}

# Reconnect to the previous gdbserver session.

proc gdbserver_reconnect { } {
    global gdbserver_protocol
    global gdbserver_gdbport

    global gdbserver_reconnect_p
    if {![info exists gdbserver_reconnect_p] || !$gdbserver_reconnect_p} {
	error "gdbserver_reconnect_p is not set before gdbserver_reconnect"
	return 0
    }

    return [gdb_target_cmd $gdbserver_protocol $gdbserver_gdbport]
}

# Start and connect to a gdbserver in extended mode.  Note this frobs
# $gdbserver_protocol, so should be used only from a board that
# usually connects in target remote mode.
proc gdbserver_start_extended { } {
    global gdbserver_protocol
    global gdbserver_gdbport
    global use_gdb_stub

    set res [gdbserver_start "--multi" ""]
    set gdbserver_protocol [lindex $res 0]
    if { [string first "extended-" $gdbserver_protocol] != 0} {
	set gdbserver_protocol "extended-$gdbserver_protocol"
    }
    set gdbserver_gdbport [lindex $res 1]

    # Even if the board file is testing with target remote, our caller
    # wants to test against gdbserver in extended-remote mode.  Make sure to
    # disable stub-like techniques.
    set use_gdb_stub 0

    return [gdb_target_cmd $gdbserver_protocol $gdbserver_gdbport]
}

# Start and connect to a gdbserver in extended/multi mode.  Unlike
# gdbserver_start_extended, this does not frob $gdbserver_protocol.

proc gdbserver_start_multi { } {
    global gdbserver_protocol
    global gdbserver_gdbport

    set res [gdbserver_start "--multi" ""]
    set gdbserver_protocol [lindex $res 0]
    set gdbserver_gdbport [lindex $res 1]

    return [gdb_target_cmd $gdbserver_protocol $gdbserver_gdbport]
}

# Start a gdbserver process in multi/extended mode, and have GDB
# connect to it (MI version).  Return 0 on success, or non-zero on
# failure.

proc mi_gdbserver_start_multi { } {
    global gdbserver_protocol
    global gdbserver_gdbport

    set res [gdbserver_start "--multi" ""]
    set gdbserver_protocol [lindex $res 0]
    set gdbserver_gdbport [lindex $res 1]

    return [mi_gdb_target_cmd $gdbserver_protocol $gdbserver_gdbport]
}