#   Copyright (C) 1993 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */

# Please email any bugs, comments, and/or additions to this file to:
# DejaGnu@cygnus.com

# This file was written by Ian Lance Taylor <ian@cygnus.com>.

# GDB support routines for a board using the MIPS remote debugging
# protocol.  These are actually pretty generic.

# DejaGnu currently assumes that debugging is being done over the main
# console port.  It would probably be more convenient for people using
# IDT boards to permit the debugging port and the connected port to be
# different, since an IDT board has two ports.  This would require
# extending some of the tests in a fashion similar to that done for
# VxWorks, because the test output would appear on the other port,
# rather than being displayed by gdb.

set prompt "\(gdb\)"

load_lib remote.exp
load_lib gdb.exp

#
# gdb_version -- extract and print the version number of gdb
#
proc gdb_version {} {
    global GDB
    global GDBFLAGS
    global prompt
    set tmp [exec echo "q" | $GDB]
    set version [lindex $tmp [lsearch $tmp "\[0-9\]*"]]
    set version [string range $version 0 [expr [string length $version]-2]]
    clone_output "[which $GDB] version $version $GDBFLAGS\n"
}

#
# gdb_load -- load a file into the GDB. 
#             Returns a 0 if there was an error,
#                       1 if it load successfully.
#
proc gdb_load { arg } {
    global verbose
    global loadpath
    global loadfile
    global prompt
    global spawn_id
    global GDB
    global expect_out

    set loadfile [file tail $arg]
    set loadpath [file dirname $arg]
    gdb_unload
    send "file $arg\n"
    expect {
	-re "A program is being debugged already.  Kill it\? \(y or n\)" {
	    send "y\n"
	    continue -expect
	}
	-re "Reading symbols from.*done..*$prompt $" { }
	-re "$prompt $" { error "GDB couldn't read file" }
	timeout { error "(timeout) read symbol file" ; return }
    }
    send "load $arg\n"
    if $verbose>1 then {
	send_user "Loading $arg into $GDB\n"
    }
    set timeout 1200
    expect {
	-re "Loading.*$prompt $" {
	    if $verbose>1 then {
		send_user "Loaded $arg into $GDB\n"
	    }
	    set timeout 30
	    return 1
	}
	-re "$prompt $"     {
	    if $verbose>1 then {
		error "GDB couldn't load."
	    }
	}
	timeout {
	    if $verbose>1 then {
		error "Timed out trying to load $arg."
	    }
	}
    }
    set timeout 10
    if [info exists expect_out(buffer)] then {
	send_log $expect_out(buffer)
    }
    return 0
}

#
# gdb_start -- start GDB running.
#
proc gdb_start { } {
    global GDB
    global GDBFLAGS
    global spawn_id
    global shell_id
    global prompt
    global verbose
    global targetname
    global connectmode
    global reboot
    global baud

    # reboot the board to get a clean start
    if $reboot then {
	if ![info exists connectmode] then {
	    set connectmode "kermit"
	}	
	if ![info exists baud] then {
	    set baud 9600
	}
	set shell_id [ eval $connectmode "$targetname" $baud ]
	send -i $shell_id "\CC"
	expect -i $shell_id {
	    -re "<IDT>$" { }
	    timeout     { error "(timeout) board did not come up."; return -1 }
	}
	send -i $shell_id "go 0xbfc00000"
	expect -i $shell_id {
	    -re "<IDT>$" { }
	    timeout     { error "(timeout) board did not come up."; return -1 }
	}
	exit_remote_shell $shell_id
    }

    set GDB [which $GDB]
    # start GDB
    if [ llength $GDBFLAGS ] then {
	spawn $GDB $GDBFLAGS
    } else {
	spawn $GDB
    }
    expect  {
	-re "GDB.*$prompt $"   {
	    if $verbose>1 then {
		send_user "$GDB initialized for cross mode\n\n"
	    }
	}
	-re "$prompt $"     { error "GDB never initialized."; return -1 }
	timeout             { error "(timeout) GDB never initialized.";
			      return -1 }
    }

    # force the height to "unlimited", so no pagers get used
    send "set height 0\n"
    expect -re ".*$prompt $" {}
    # force the width to "unlimited", so no wraparound occurs
    send "set width 0\n"
    expect -re ".*$prompt $" {}

    # Don't use floating point instructions, in case the board doesn't
    # support them.
    send "set mipsfpu off\n"
    expect -re ".*$prompt $" {}

    if $verbose>1 then {
	send_user "Setting up target, please wait...\n"
    }
    send "target mips $targetname\n"
    set timeout 60
    expect {
	-re "Remote MIPS debugging.*$prompt $"	{
	    if $verbose>1 then {
		send_user "Set target to $targetname\n"
	    }
	}
	timeout { 
	    error "Couldn't set MIPS target."
	    set timeout 10
	    return -1
	}
    }
    set timeout 10
}

expect_after {
    "<return>"		   { send "\n"; error "Window too small." }
    -re "\(y or n\) " 	   { send "n\n"; error "Got interactive prompt." }
    buffer_full		   { error "internal buffer is full." }
    eof			   { error "eof -- pty is hosed." }
    timeout			   { error "timeout." }
    "virtual memory exhausted" { error "virtual memory exhausted." }
    "Undefined command"	   { error "send string probably wrong." }
}

gdb_start

# make sure gdb has actually started, otherwise if the first test
# timesout, DejaGnu crashes
send "\n"
expect {
    -re "$prompt"
    }