2012-02-29 Jan Kratochvil Fix disp-step-syscall.exp: fork: single step over fork. * i386-linux-tdep.c (-i386_linux_get_syscall_number): Rename to ... (i386_linux_get_syscall_number_from_regcache): ... here, new function comment, change parameters gdbarch and ptid to regcache. Remove parameter regcache, initialize gdbarch from regcache here. (i386_linux_get_syscall_number, i386_linux_displaced_step_copy_insn): New functions. (i386_linux_init_abi): Install i386_linux_displaced_step_copy_insn instead. * i386-tdep.c (i386_syscall_p): Check also for 'sysenter' and 'syscall'. Make the 'int' check more strict. 2012-02-29 Jan Kratochvil Fix reverse mode for syscall on AMD CPUs in 32-bit mode. * i386-linux-tdep.c (i386_linux_intx80_sysenter_record): Rename to ... (i386_linux_intx80_sysenter_syscall_record): ... here. (i386_linux_init_abi): Initialize also I386_SYSCALL_RECORD. Use the renamed function name. 2012-02-29 Jan Kratochvil * arm-linux-tdep.c (arm_linux_copy_svc): Reset stale FRAME. * breakpoint.c (until_break_command): Likewise. * elfread.c (elf_gnu_ifunc_resolver_stop): Likewise. * infcall.c (call_function_by_hand): Likewise. * infcmd.c (finish_forward): Likewise. * infrun.c (insert_exception_resume_breakpoint): Likewise. 2012-02-28 Joel Brobecker From Tristan Gingold . * ada-tasks.c (ada_tasks_inferior_data_sniffer): Rework code to avoid variable assignments inside condition. 2012-02-28 Jan Kratochvil Fix static analysis issue found by cppcheck. * microblaze-tdep.c (microblaze_extract_return_value): Fix uninitialized BUF for size 2. 2012-02-27 Chris Dearman Nathan Froyd Maciej W. Rozycki * mips-tdep.c (mips32_instruction_has_delay_slot): New function. (mips16_instruction_has_delay_slot): Likewise. (mips_segment_boundary): Likewise. (mips_adjust_breakpoint_address): Likewise. (mips_gdbarch_init): Use mips_adjust_breakpoint_address. 2012-02-27 Maciej W. Rozycki Maciej W. Rozycki * infrun.c (handle_inferior_event): Don't proceed through shared library trampolines if stepping at the machine instruction level. 2012-02-27 Maciej W. Rozycki * mips-linux-tdep.c (mips_linux_init_abi): Set num_pseudo_regs too. 2012-02-27 Thomas Schwinge * sh-tdep.c (sh_make_stub_cache, sh_stub_this_id) (sh_stub_unwind_sniffer): New functions. (sh_stub_unwind): New variable. (sh_gdbarch_init): Wire everything. 2012-02-27 Pedro Alves * linux-nat.c (pid_is_stopped): Delete, moved to common/. (linux_nat_post_attach_wait): Adjust to use linux_proc_pid_is_stopped. * common/linux-procfs.h (linux_proc_pid_is_stopped): Declare. * common/linux-procfs.c (linux_proc_pid_is_stopped): New function, based on pid_is_stopped from both linux-nat.c and gdbserver/linux-low.c, and renamed. 2012-02-24 Maciej W. Rozycki * remote.c (remote_watchpoint_addr_within_range): New function. (init_remote_ops): Use it. 2012-02-24 Maciej W. Rozycki * target.h (target_watchpoint_addr_within_range): Document macro. 2012-02-24 Pedro Alves * stack.c (set_last_displayed_sal): Issue internal_error instead of warning, and issue it after clearing the last displayed sal. 2012-02-24 Jan Kratochvil Pedro Alves * breakpoint.c (until_break_command): Install breakpoints after all frame manipulations. 2012-02-24 Luis Machado * remote.c (remote_supports_cond_breakpoints): New forward declaration. (remote_add_target_side_condition): New function. (remote_insert_breakpoint): Add target-side breakpoint conditional if supported. (remote_insert_hw_breakpoint): Likewise. (init_remote_ops): Set to_supports_evaluation_of_breakpoint_conditions hook. * target.c (update_current_target): Inherit to_supports_evaluation_of_breakpoint_conditions. Default to_supports_evaluation_of_breakpoint_conditions to return_zero. * target.h (struct target_ops) : New field. (target_supports_evaluation_of_breakpoint_conditions): New #define. * breakpoint.c (get_first_locp_gte_addr): New forward declaration. (condition_evaluation_both, condition_evaluation_auto, condition_evaluation_host, condition_evaluation_target, condition_evaluation_enums, condition_evaluation_mode_1, condition_evaluation_mode): New static globals. (translate_condition_evaluation_mode): New function. (breakpoint_condition_evaluation_mode): New function. (gdb_evaluates_breakpoint_condition_p): New function. (ALL_BP_LOCATIONS_AT_ADDR): New helper macro. (mark_breakpoint_modified): New function. (mark_breakpoint_location_modified): New function. (set_condition_evaluation_mode): New function. (show_condition_evaluation_mode): New function. (bp_location_compare_addrs): New function. (get_first_location_gte_addr): New helper function. (set_breakpoint_condition): Free condition bytecode if locations has become unconditional. Call mark_breakpoint_modified (...). (condition_command): Call update_global_location_list (1) for breakpoints. (breakpoint_xfer_memory): Use is_breakpoint (...). (is_breakpoint): New function. (parse_cond_to_aexpr): New function. (build_target_condition_list): New function. (insert_bp_location): Handle target-side conditional breakpoints and call build_target_condition_list (...). (update_inserted_breakpoint_locations): New function. (insert_breakpoint_locations): Handle target-side conditional breakpoints. (bpstat_check_breakpoint_conditions): Add comment. (bp_condition_evaluator): New function. (bp_location_condition_evaluator): New function. (print_breakpoint_location): Print information on where the condition will be evaluated. (print_one_breakpoint_location): Likewise. (init_bp_location): Call mark_breakpoint_location_modified (...) for breakpoint location. (force_breakpoint_reinsertion): New functions. (update_global_location_list): Handle target-side breakpoint conditions. Reinsert locations that are already inserted if conditions have changed. (bp_location_dtor): Free agent expression bytecode. (disable_breakpoint): Call mark_breakpoint_modified (...). Call update_global_location_list (...) with parameter 1 for breakpoints. (disable_command): Call mark_breakpoint_location_modified (...). Call update_global_location_list (...) with parameter 1 for breakpoints. (enable_breakpoint_disp): Call mark_breakpoint_modified (...). (enable_command): mark_breakpoint_location_modified (...). (_initialize_breakpoint): Update documentation and add condition-evaluation breakpoint subcommand. * breakpoint.h: Include ax.h. (condition_list): New data structure. (condition_status): New enum. (bp_target_info) : New field. (bp_location) : New fields. (is_breakpoint): New prototype. 2012-02-24 Luis Machado * remote.c (remote_state) : New field. (PACKET_ConditionalBreakpoints): New enum. (remote_cond_breakpoint_feature): New function. (remote_protocol_features): Add new ConditionalBreakpoints entry. (remote_supports_cond_breakpoints): New function. (_initialize_remote): Add new packet configuration for target-side conditional breakpoints. 2012-02-24 Luis Machado * NEWS: Mention target-side conditional breakpoint support, new condition-evaluation breakpoint subcommand and remote packet extensions. 2012-02-24 Luis Machado * breakpoint.c (bp_location_compare): Sort by pspace before sorting by number. 2012-02-24 Thomas Schwinge * sh-tdep.c (sh_skip_prologue): Use skip_prologue_using_sal. (after_prologue): Remove. 2012-02-23 Tom Tromey * jv-valprint.c (java_val_print): Remove dead code. 2012-02-23 Tristan Gingold * ada-tasks.c (struct ada_tasks_inferior_data): Add known_tasks_element and known_tasks_length fields. (read_known_tasks_array): Change argument type. Use pointer type and number of elements from DATA. Adjust. (read_known_tasks_list): Likewise. (get_known_tasks_addr): Remove. (ada_set_current_inferior_known_tasks_addr): Renamed to ... (ada_tasks_inferior_data_sniffer): ... this. Use symtab for element type and array length. Merge former get_known_tasks_addr code. 2012-02-23 Jan Kratochvil PR backtrace/13716 * infcmd.c (finish_forward): New variable frame_id, initialize it, use it after set_momentary_breakpoint. 2012-02-22 Sterling Augustine PR 13689: * breakpoint.c (watchpoint_exp_is_constant): Add UNOP_CAST to switch. 2012-02-22 Gary Benson * dwarf2read.c (dwarf2_read_index): Correct misspelling. (find_slot_in_mapped_hash): Likewise. 2012-02-21 Jan Kratochvil PR build/13638 * configure.ac (MAKEINFO): Replace AC_CHECK_PROG by AC_ARG_VAR. (MAKEINFOFLAGS): Replace static string by AC_ARG_VAR. * configure: Regenerate. 2012-02-21 Tristan Gingold Pedro Alves * ia64-tdep.c: Do not include libunwind-ia64.h. * libunwind-frame.h: Remove #ifdef HAVE_LIBUNWIND_H guard. Include libunwind-ia64.h instead of libunwind.h. * configure.ac (--with-libunwind, $enable_libunwind): Don't check for libunwind.h existence. * configure, config.in: Regenerate. 2012-02-21 Anton Gorenkov * c-valprint.c (c_value_print): Use value_rtti_indirect_type instead of value_rtti_target_type. * eval.c (evaluate_subexp_standard): Use value_rtti_indirect_type instead of value_rtti_target_type. * typeprint.c (whatis_exp): Use value_rtti_indirect_type instead of value_rtti_target_type. * valops.c (value_ind): Extract function readjust_indirect_value_type. (value_rtti_target_type): Rename to ... (value_rtti_indirect_type): ... here and make it indirect. Update function comment. * value.c (readjust_indirect_value_type): New function. (coerce_ref): Support for enclosing type setting for references with readjust_indirect_value_type. * value.h (readjust_value_type): New declaration. (value_rtti_target_type): Rename to ... (value_rtti_indirect_type): ... here. 2012-02-21 Anton Gorenkov * MAINTAINERS (Write After Approval): Add myself to the list. 2012-02-20 Doug Evans * objfiles.c (add_to_objfile_sections): Remove outdated comments. Rename objfile_p_char parameter to objfilep. (build_objfile_section_table): Result is now void. All callers updated. * objfiles.h (struct objfile): Tweak comments, whitespace. (build_objfile_section_table): Update. * elfread.c (elf_symfile_segments): Fix warning text. 2012-02-20 Tom Tromey PR gdb/13498: * dwarf2read.c (dw2_expand_symtabs_matching): Only visit a particular set of file names once. (dw2_map_symbol_filenames): Likewise. 2012-02-20 Jan Kratochvil Code cleanup. * main.c (write_files): Remove the declaration. (external_editor_command): Move the declaration ... [GDBTK] (external_editor_command): ... here. Fix the comment. 2012-02-20 Tom Tromey * dwarf2read.c (dw2_map_symtabs_matching_filename): Remove extraneous block. 2012-02-20 Tristan Gingold * darwin-nat.h (enum darwin_msg_state): Add comments. 2012-02-20 Tristan Gingold * amd64-darwin-tdep.c (x86_darwin_init_abi_64): Fix jb_pc_offset value. 2012-20-18 Joel Brobecker * breakpoint.c (watchpoint_exp_is_const): Add missing empty line between function description and implementation. 2012-02-17 Tom Tromey PR python/12070: * python/py-event.c (event_object_getset): New global. (event_object_type): Reference it. * python/py-type.c (field_object_getset): New global. (field_object_type): Reference it. * python/python-internal.h (gdb_py_generic_dict): Declare. * python/py-utils.c (gdb_py_generic_dict): New function. 2012-02-17 Tristan Gingold * solib-darwin.c (darwin_current_sos): Check magic and filetype 2012-02-17 Thomas Schwinge * sh-tdep.c (sh_is_renesas_calling_convention): Fix handling of TYPE_CALLING_CONVENTION annotation. 2012-02-16 Kevin Buettner * MAINTAINERS: Add rx to target ISA section. * Makefile.in (ALL_TARGET_OBS): Add rx-tdep.o. (ALLDEPFILES): Add rx-tdep.c. 2012-02-16 Tom Tromey * symfile.c (symbol_file_add_main_1): Use inferior's symfile_flags. * solib.c (solib_read_symbols): Use inferior's symfile_flags. * linux-nat.c (linux_child_follow_fork): Set symfile_flags on inferior. * infrun.c (handle_vfork_child_exec_or_exit): Set symfile_flags on inferior. (follow_exec): Use inferior's symfile_flags. * inferior.h (struct inferior) : New field. 2012-02-16 Mike Frysinger PR gdb/9734: * remote-sim.c (gdbsim_create_inferior): Call error() when sim_create_inferior() fails. 2012-02-16 Josh Matthews * machoread.c: Initialize nbr_syms to avoid warnings-as-errors failure. 2012-02-16 Tom Tromey PR c++/13653: * thread.c (struct current_thread_cleanup) : New field. (restore_current_thread_cleanup_dtor): Restore 'removable' field. (make_cleanup_restore_current_thread): Initialize new field. 2012-02-15 Kevin Buettner * MAINTAINERS: Add rl78 to target ISA section. * Makefile.in (ALL_TARGET_OBS): Add rl78-tdep.o. (ALLDEPFILES): Add rl78-tdep.c. * NEWS: Mention rl78 as a new target. 2012-02-15 Aleksandar Ristovski * frame.c (find_frame_sal): Initialize sal->pspace field from frame data. * stack.c (set_last_displayed_sal): Validate that PSPACE is not NULL. 2012-02-15 Tom Tromey PR gdb/12659: * infcmd.c (registers_info): Print just the current register's name. 2012-02-15 Tom Tromey * python/py-symbol.c (sympy_value): Use _(). 2012-02-15 Pedro Alves * remote.c (remote_detach_1, extended_remote_attach_1): Tweak output to be like native targets'. (remote_pid_to_str): Special case the null ptid. 2012-02-14 Stan Shebs * NEWS: Mention enable count command. * breakpoint.h (struct breakpoint): New field enable_count. * breakpoint.c (enable_breakpoint_disp): Add count argument. (enable_breakpoint): Add arg to call. (struct disp_data): New struct. (do_enable_breakpoint_disp): Interp arg as disp_data and unpack. (do_map_enable_once_breakpoint): Create a struct and pass it. (do_map_enable_delete_breakpoint): Ditto. (do_map_enable_count_breakpoint): New function. (enable_count_command): New function. (bpstat_stop_status): Decrement enable_count. (print_one_breakpoint_location): Report enable count. (_initialize_breakpoint): Add enable count command. 2012-02-14 Kevin Buettner * rl78-tdep.c (reggroups.h): Include. (RL78_RAW_BANK0_R0_REGNUM, RL78_RAW_BANK0_R1_REGNUM) (RL78_RAW_BANK0_R2_REGNUM, RL78_RAW_BANK0_R3_REGNUM) (RL78_RAW_BANK0_R4_REGNUM, RL78_RAW_BANK0_R5_REGNUM) (RL78_RAW_BANK0_R6_REGNUM, RL78_RAW_BANK0_R7_REGNUM) (RL78_RAW_BANK1_R0_REGNUM, RL78_RAW_BANK1_R1_REGNUM) (RL78_RAW_BANK1_R2_REGNUM, RL78_RAW_BANK1_R3_REGNUM) (RL78_RAW_BANK1_R4_REGNUM, RL78_RAW_BANK1_R5_REGNUM) (RL78_RAW_BANK1_R6_REGNUM, RL78_RAW_BANK1_R7_REGNUM) (RL78_RAW_BANK2_R0_REGNUM, RL78_RAW_BANK2_R1_REGNUM) (RL78_RAW_BANK2_R2_REGNUM, RL78_RAW_BANK2_R3_REGNUM) (RL78_RAW_BANK2_R4_REGNUM, RL78_RAW_BANK2_R5_REGNUM) (RL78_RAW_BANK2_R6_REGNUM, RL78_RAW_BANK2_R7_REGNUM) (RL78_RAW_BANK3_R0_REGNUM, RL78_RAW_BANK3_R1_REGNUM) (RL78_RAW_BANK3_R2_REGNUM, RL78_RAW_BANK3_R3_REGNUM) (RL78_RAW_BANK3_R4_REGNUM, RL78_RAW_BANK3_R5_REGNUM) (RL78_RAW_BANK3_R6_REGNUM, RL78_RAW_BANK3_R7_REGNUM): Add to beginning of register list. (RL78_BANK0_R0_REGNUM, RL78_BANK0_R1_REGNUM, RL78_BANK0_R2_REGNUM) (RL78_BANK0_R3_REGNUM, RL78_BANK0_R4_REGNUM, RL78_BANK0_R5_REGNUM) (RL78_BANK0_R6_REGNUM, RL78_BANK0_R7_REGNUM, RL78_BANK1_R0_REGNUM) (RL78_BANK1_R1_REGNUM, RL78_BANK1_R2_REGNUM, RL78_BANK1_R3_REGNUM) (RL78_BANK1_R4_REGNUM, RL78_BANK1_R5_REGNUM, RL78_BANK1_R6_REGNUM) (RL78_BANK1_R7_REGNUM, RL78_BANK2_R0_REGNUM, RL78_BANK2_R1_REGNUM) (RL78_BANK2_R2_REGNUM, RL78_BANK2_R3_REGNUM, RL78_BANK2_R4_REGNUM) (RL78_BANK2_R5_REGNUM, RL78_BANK2_R6_REGNUM, RL78_BANK2_R7_REGNUM) (RL78_BANK3_R0_REGNUM, RL78_BANK3_R1_REGNUM, RL78_BANK3_R2_REGNUM) (RL78_BANK3_R3_REGNUM, RL78_BANK3_R4_REGNUM, RL78_BANK3_R5_REGNUM) (RL78_BANK3_R6_REGNUM, RL78_BANK3_R7_REGNUM): Move these into the pseudo registers. Rearrange other pseudo registers too so that the bank registers appear at the end. (rl78_register_type): Account for the fact that the byte sized bank registers are now pseudo-registers. (rl78_register_name): Rearrange the register name array. Make initial set of raw banked registers inaccessible. (rl78_register_reggroup_p, rl78_register_sim_regno): New functions. (rl78_pseudo_register_read, rl78_pseudo_register_write): Add case for copying bytes back and forth between raw and pseudo versions of the banked registers. Update other cases to reflect the changed names. (rl78_return_value): Update to account for changed names of raw registers. (rl78_gdbarch_init): Register rl78_register_reggroup_p() and rl78_register_sim_regno(). 2012-02-14 Kevin Buettner * rl78-tdep.c (rl78_skip_prologue): Make `const' the type of the name parameter being passed to find_pc_partial_function(). 2012-02-14 Jan Kratochvil * MAINTAINERS: Step down from being ia64 target maintainer. 2012-02-12 Jan Kratochvil * ppc-linux-nat.c (fetch_register, store_register): Fix GCC aliasing compilation warning. 2012-02-12 Jan Kratochvil Fix crash on loaded shlibs without loaded exec_bfd. * exec.c (exec_files_info): Do not crash on NULL EXEC_BFD. (set_section_command): Replace exec_bfd by p->bfd. 2012-02-10 Tom Tromey * linespec.c (decode_line_internal): Skip symtabs_from_filename when we have a C++ qualified name. 2012-02-10 Pedro Alves * inferior.c (inferior_pid_to_str): New. (print_inferior, inferior_command): Use it. 2012-02-10 Pedro Alves * configure.ac (HAVE_ELF test): Put the old CFLAGS at the end of the test CFLAGS. * configure: Regenerate. 2012-02-10 Jan Kratochvil * linespec.c (decode_line_internal): Fix comment correctness. 2012-02-09 Valery Khromov PR gdb/12953 * Makefile.in (HFILES_NO_SRCDIR): Add amd64bsd-nat.h. * amd64bsd-nat.c: Add support for debug registers (adapted from i386bsd-nat.c). [HAVE_PT_GETDBREGS] (amd64bsd_dr_get, amd64bsd_dr_set) (amd64bsd_dr_set_control, amd64bsd_dr_set_addr) (amd64bsd_dr_get_addr, amd64bsd_dr_get_status) (amd64bsd_dr_get_control): New functions. * amd64bsd-nat.h: New file (adapted from i386bsd-nat.h). * amd64fbsd-nat.c: Include "amd64bsd-nat.h", "i386-nat.h". [HAVE_PT_GETDBREGS] (_initialize_amd64fbsd_nat): Add hardware watchpoints initialization. * config/i386/fbsd64.mh (NATDEPFILES): Add i386-nat.o. 2012-02-09 Jan Kratochvil * gdb-gdb.py (StructMainTypePrettyPrinter) : Print flds_bnds.fields. (StructMainTypePrettyPrinter) : Print flds_bnds.bounds. 2012-02-09 Jan Kratochvil * breakpoint.c (bp_location_compare): Fix comment. Reindent the code. 2012-02-08 Joel Brobecker * language.h (symbol_name_cmp_ftype): Renames symbol_name_match_p_ftype. (struct language_defn)[la_get_symbol_name_cmp]: Renames la_get_symbol_name_match_p. * ada-lang.c (ada_get_symbol_name_cmp): Renames ada_get_symbol_name_match_p. Update comment. (ada_language_defn)[la_get_symbol_name_cmp]: Update value. * linespec.c (struct symbol_matcher_data)[symbol_name_cmp]: Renames symbol_name_match_p. Update field type. (iterate_name_matcher, iterate_over_all_matching_symtabs): Adjust. * c-lang.c, d-lang.c, f-lang.c, jv-lang.c, m2-lang.c, objc-lang.c, opencl-lang.c, p-lang.c: Replace "la_get_symbol_name_match_p" by "la_get_symbol_name_cmp" in comments. * language.c: Likewise. 2012-02-08 Rainer Orth * amd64-sol2-tdep.c (amd64_sol2_gregset_reg_offset): Correct %eflags offset. * i386-sol2-nat.c (amd64_sol2_gregset64_reg_offs) (amd64_sol2_gregset32_reg_offs): Likewise. 2012-02-08 Joel Brobecker * solib-darwin.c (darwin_bfd_open): Make sure that the filename of the returned BFD is allocated by GDB. 2012-02-07 Tom Tromey PR python/12027: * python/python-internal.h (frame_object_type): Declare. * python/py-symbol.c (sympy_needs_frame): New function. (sympy_value): New function. (symbol_object_getset): Add "needs_frame". (symbol_object_methods): Add "value". * python/py-frame.c (frame_object_type): No longer static. 2012-02-07 Tom Tromey PR python/13599: * python/py-symbol.c (sympy_line): New function. (symbol_object_getset): Add "line". 2012-02-07 Tom Tromey * charset.c (find_charset_names): Check 'in' against NULL. 2012-02-06 Doug Evans * gdbtypes.h (struct main_type): Change type of name,tag_name, and fields.name members from char * to const char *. All uses updated. (struct cplus_struct_type): Change type of fn_fieldlists.name member from char * to const char *. All uses updated. (type_name_no_tag): Update. (lookup_unsigned_typename, lookup_signed_typename): Update. * gdbtypes.c (type_name_no_tag): Change result type from char * to const char *. All callers updated. (lookup_unsigned_typename, lookup_signed_typename): Change type of name parameter from char * to const char *. * symtab.h (struct cplus_specific): Change type of demangled_name member from char * to const char *. All uses updated. (struct general_symbol_info): Change type of name and mangled_lang.demangled_name members from char * to const char *. All uses updated. (symbol_get_demangled_name, symbol_natural_name): Update. (symbol_demangled_name, symbol_search_name): Update. * symtab.c (symbol_get_demangled_name): Change result type from char * to const char *. All callers updated. (symbol_natural_name, symbol_demangled_name): Ditto. (symbol_search_name): Ditto. (completion_list_add_name): Change type of symname,sym_text, text,word parameters from char * to const char *. (completion_list_objc_symbol): Change type of sym_text, text,word parameters from char * to const char *. * ada-lang.c (find_struct_field): Change type of name parameter from char * to const char *. (encoded_ordered_before): Similarly for N0,N1 parameters. (old_renaming_is_invisible): Similarly for function_name parameter. (ada_type_name): Change result type from char * to const char *. All callers updated. * ada-lang.h (ada_type_name): Update. * buildsym.c (hashname): Change type of name parameter from char * to const char *. * buildsym.h (hashname): Update. * dbxread.c (end_psymtab): Change type of include_list parameter from char ** to const char **. * dwarf2read.c (determine_prefix): Change result type from char * to const char *. All callers updated. * f-lang.c (find_common_for_function): Change type of name, funcname parameters from char * to const char *. * f-lang.c (find_common_for_function): Update. * f-valprint.c (list_all_visible_commons): Change type of funcname parameters from char * to const char *. * gdbarch.sh (static_transform_name): Change type of name parameter and result from char * to const char *. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * i386-sol2-tdep.c (i386_sol2_static_transform_name): Change type of name parameter from char * to const char *. * jv-lang.c (java_primitive_type_from_name): Ditto. (java_demangled_signature_length): Similarly for signature parameter. (java_demangled_signature_copy): Ditto. (java_demangle_type_signature): Ditto. * jv-lang.h (java_primitive_type_from_name): Update. (java_demangle_type_signature): Update. * objc-lang.c (specialcmp): Change type of a,b parameters from char * to const char *. * p-lang.c (is_pascal_string_type): Change type of arrayname parameter from char * to const char *. All callers updated. * p-lang.h (is_pascal_string_type): Update. * solib-frv.c (find_canonical_descriptor_in_load_object): Change type of name parameter from char * to const char *. * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Ditto. * utils.c (fprintf_symbol_filtered): Ditto. * defs.h (fprintf_symbol_filtered): Update. * sparc-tdep.h (sparc_sol2_static_transform_name): Update. * stabsread.h (end_psymtab): Update. * stack.c (find_frame_funname): Change type of funname parameter from char ** to const char **. * stack.h (find_frame_funname): Update. * typeprint.c (type_print): Change type of varstring parameter from char * to const char *. * value.h (type_print): Update. * xcoffread.c (xcoff_start_psymtab): Change type of filename parameter from char * to const char *. All callers updated. (xcoff_end_psymtab): Change type of include_list parameter from char ** to const char **. All callers updated. (swap_sym): Similarly for name parameter. All callers updated. * coffread.c (patch_type): Add (char*) cast to xfree parameter. Use xstrdup. (process_coff_symbol): Use xstrdup. * stabsread.c (stabs_method_name_from_physname): Renamed from update_method_name_from_physname. Change result type from void to char *. All callers updated. (read_member_functions): In has_destructor case, store name in objfile obstack instead of malloc space. In !has_stub case, fix mem leak. 2012-02-06 Luca Pizzamiglio * configure: Rebuild. * configure.ac: Put -L../bfd and -L../libiberty at the front of LDFLAGS. 2012-02-03 Kevin Buettner * configure.tgt (rl78-*-elf): New target. * rl78-tdep.c: New file. 2012-02-03 Philippe Waroquiers * remote.c (remote_rcmd): Use getpkt_sane to detect timeout and continue the loop. Add QUIT statement. 2012-02-03 Tom Tromey PR gdb/13596: * solib.h (gdb_bfd_lookup_symbol_from_symtab): Rename from bfd_lookup_symbol_from_symtab. * solib-pa64.c (pa64_solib_create_inferior_hook): Use gdb_bfd_lookup_symbol_from_symtab. 2012-02-03 Joel Brobecker * mi/mi-cmd-stack.c (list_args_or_locals): For argument symbols, use SYMBOL_LINKAGE_NAME to find the corresponding non-argument symbol. Add assertion that sym2 is never NULL. 2012-02-02 Doug Evans * blockframe.c (find_pc_partial_function_gnu_ifunc): Change type of "name" parameter to const char ** from char **. All callers updated. (find_pc_partial_function): Ditto. (cache_pc_function_name): Change type to const char * from char *. * symtab.h ((find_pc_partial_function_gnu_ifunc): Update. (find_pc_partial_function): Update. * alpha-tdep.h (struct gdbarch_tdep, member pc_in_sigtramp): Change type of "name" parameter to const char * from char *. All uses updated. * arch-utils.c (generic_in_solib_return_trampoline): Change type of "name" parameter to const char * from char *. * arch-utils.h (generic_in_solib_return_trampoline): Update. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Change type of "name" parameter to const char * from char *. * gdbarch.sh (in_solib_return_trampoline): Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Update. * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Update. * m32r-linux-tdep.c (m32r_linux_pc_in_sigtramp): Change type of "name" parameter to const char * from char *. * skip.c (skip_function_pc): Ditto. * sparc-sol2-tdep.c (sparc_sol2_pc_in_sigtramp): Ditto. * sparc-tdep.h (sparc_sol2_pc_in_sigtramp): Update. * sparc64fbsd-tdep.c (sparc64fbsd_pc_in_sigtramp): Ditto. * sparc64nbsd-tdep.c (sparc64nbsd_pc_in_sigtramp): Ditto. * sparc64obsd-tdep.c (sparc64obsd_pc_in_sigtramp): Ditto. * sparcnbsd-tdep.c (sparc32nbsd_pc_in_sigtramp): Ditto. * sparcobsd-tdep.c (sparc32obsd_pc_in_sigtramp): Ditto. * nbsd-tdep.c (nbsd_pc_in_sigtramp): Similary for "func_name". * nbsd-tdep.h (nbsd_pc_in_sigtramp): Update. 2012-02-02 Pedro Alves * remote.c (remote_get_min_fast_tracepoint_insn_len): Return 0 if the current inferior has no execution. Make sure the current remote process matches gdb's current inferior. 2012-02-02 Tom Tromey PR gdb/13405: * tui/tui-win.c (parse_scrolling_args): Don't write to possibly read-only memory. 2012-02-02 Tom Tromey PR gdb/9307: * symtab.c (lookup_language_this): Set block_found. 2012-02-01 Tom Tromey PR gdb/13431: * jit.c (struct jit_inferior_data): Rewrite. (struct jit_objfile_data): New. (get_jit_objfile_data): New function. (add_objfile_entry): Update. (jit_read_descriptor): Return int. Replace descriptor_addr argument with inf_data. Update. Don't call error. (jit_breakpoint_re_set_internal): Reorder logic. Update. Look up descriptor here. (jit_inferior_init): Don't look up descriptor. Don't call error. (jit_reset_inferior_data_and_breakpoints) (jit_inferior_created_observer): Remove. (jit_inferior_exit_hook): Update. (jit_executable_changed_observer): Remove. (jit_event_handler): Update. (free_objfile_data): Reset inferior data if needed. (_initialize_jit): Update. 2012-02-01 Tom Tromey * jit.c (bfd_open_from_target_memory): Move higher in file. 2012-02-01 Tristan Gingold * libunwind-frame.c (libunwind_load): Display message if dlopen failed. 2012-02-01 Gary Benson * symtab.h (symbol_name_match_p_ftype): New typedef. (iterate_over_symbols): Use the above. * symtab.c (iterate_over_symbols): Likewise. * language.h (language_defn->la_iterate_over_symbols): Likewise. * ada-lang.c (ada_iterate_over_symbols): Likewise. * linespec.c (iterate_over_all_matching_symtabs): Likewise. (iterate_name_matcher): Document return values. (collect_one_symbol): Likewise. (collect_function_symbols): Likewise. (collect_symbols): Likewise. 2012-02-01 Tom Tromey * ada-lang.c (resolve_subexp): Update. (ada_lookup_symbol_list): Add 'full_search' argument. (ada_iterate_over_symbols): Pass 0 as full_search argument to ada_lookup_symbol_list. (ada_lookup_encoded_symbol): Update. (get_var_value): Update. * ada-exp.y (block_lookup): Update. (write_var_or_type): Update. (write_name_assoc): Update. * ada-lang.h (ada_lookup_symbol_list): Update. 2012-01-31 Tom Tromey * language.h (struct language_defn) : Fix comment. 2012-01-31 Doug Evans * symtab.h: Remove outdated comment. (SYMBOL_MATCHES_NATURAL_NAME): Delete. 2012-02-01 Josh Matthews (tiny change) Fix build error in Darwin port. * i386-darwin-nat.c: Include i386-nat.h. 2012-01-30 Tom Tromey PR breakpoints/13568: * dwarf2read.c (dwarf_decode_macro_bytes): Add 'include_hash' argument. Check for recursive includes. (dwarf_decode_macros): Create an include hash. 2012-01-30 Michael Eager * configure.tgt (powerpc-*-linux*): Add glibc-tdep.o. * ppc-linux-tdep.c: Include glibc-tdep.h. (powerpc32_plt_stub, powerpc32_plt_stub_so): Add PLT stub templates. (powerpc_linux_in_plt_stub): New function. (powerpc_linux_in_dynsym_resolve_code): New function. (ppc_skip_trampoline_code): New function. (ppc_linux_init_abi): Use PPC specific functions rather than generic. Use glibc_skip_solib_resolver. 2012-01-28 Jan Kratochvil Code cleanup: Make 1440 bytes of data segment read-only. * arch-utils.c (endian_enum): Make it const char *const []. * arm-tdep.c (fp_model_strings, arm_abi_strings, arm_mode_strings): Likewise. * breakpoint.c (always_inserted_enums): Likewise. * cli/cli-cmds.c (script_ext_enums): Likewise. * cli/cli-decode.c (add_setshow_enum_cmd, complete_on_enum): Make the enumlist parameter const char *const *. * cli/cli-decode.h (struct cmd_list_element): Make the enums field const char *const *. * command.h (complete_on_enum, add_setshow_enum_cmd): Make the enumlist parameter const char *const *. * cris-tdep.c (cris_modes): Make it const char *const []. * filesystem.c (target_file_system_kinds): Likewise. * i386-tdep.c (valid_flavors, valid_conventions): Likewise. * infrun.c (follow_fork_mode_kind_names, follow_exec_mode_names) (can_use_displaced_stepping_enum, scheduler_enums) (exec_direction_names): Likewise. * language.c (_initialize_language): Make the type_or_range_names and case_sensitive_names variables const char *const []. * mips-tdep.c (mips_abi_strings): Make it const char *const []. * python/python.c (python_excp_enums): Likewise. * remote.c (interrupt_sequence_modes): Likewise. * rs6000-tdep.c (powerpc_vector_strings): Likewise. * serial.c (logbase_enums): Likewise. * sh-tdep.c (sh_cc_enum): Likewise. * stack.c (print_frame_arguments_choices, print_entry_values_choices): Likewise. * symtab.c (multiple_symbols_modes): Likewise. * tui/tui-win.c (tui_border_kind_enums, tui_border_mode_enums): Likewise. * utils.c (internal_problem_modes): Likewise. 2012-01-27 Jan Kratochvil Fix the 2012-01-26 regression by la_get_symbol_name_match_p. * linespec.c (iterate_name_matcher): Negate the SYMBOL_NAME_MATCH_P result. 2012-01-27 Doug Evans * configure.ac (with_python): Fix absolute path handling for win32. * configure: Regenerate. 2012-01-26 Doug Evans * symtab.c: Whitespace cleanup, no code changes. * symtab.c (lookup_symbol_in_language): Improve comment. (lookup_symbol_aux): Fix comment. * psymtab.c (add_psymbol_to_list): Result is now "void". * psympriv.h (add_psymbol_to_list): Update. * dwarf2read.c (add_partial_symbol): Delete local psym, unused. 2012-01-26 Jan Kratochvil Do not open script filenames twice. * cli/cli-cmds.c (source_script_from_stream): Pass to source_python_script also STREAM. * python/py-auto-load.c (source_section_scripts): Pass to source_python_script_for_objfile also STREAM. (auto_load_objfile_script): Pass to source_python_script_for_objfile also INPUT. * python/python-internal.h (source_python_script_for_objfile): New parameter file, rename parameter file to filename. * python/python.c (python_run_simple_file): Call PyRun_SimpleFile instead if !_WIN32. Update the function comment. (source_python_script, source_python_script_for_objfile) (source_python_script): New parameter file, rename parameter file to filename. Pass FILENAME to python_run_simple_file. * python/python.h (source_python_script): New parameter file, rename parameter file to filename. 2012-01-26 Pedro Alves * corelow.c (core_has_fake_pid): Delete. (core_close): Delete references to `core_has_fake_pid'. (add_to_thread_list): Adjust to mark the inferior's pid as fake. (core_open): Delete references to `core_has_fake_pid'. (core_pid_to_str): Adjust to check inferior->fake_pid_p instead of the removed global. 2012-01-26 Joel Brobecker * symfile.h (struct quick_symbol_functions) [expand_symtabs_matching]: Remove language parameter from name_matcher. Adjust the comment. * symtab.c (search_symbols_name_matches, expand_partial_symbol_name): Remove language parameter. * ada-lang.c (ada_expand_partial_symbol_name): Likewise. * linespec.c (iterate_name_matcher): Likewise. * dwarf2read.c (dw2_expand_symtabs_matching): Adjust type of name_matcher. Adjust call accordingly. * psymtab.c (expand_symtabs_matching_via_partial): Likewise. (maintenance_check_symtabs): Adjust type of parameter "fun". * psymtab.h (maintenance_check_symtabs): Likewise. 2012-01-26 Joel Brobecker * language.h (symbol_name_match_p_ftype): New typedef. (struct language_defn): Replace field la_symbol_name_compare by la_get_symbol_name_match_p. * ada-lang.c (ada_get_symbol_name_match_p): New function. (ada_language_defn): Use it. * linespec.c (struct symbol_matcher_data): New type. (iterate_name_matcher): Rewrite. (iterate_over_all_matching_symtabs): Pass a pointer to a symbol_matcher_data struct to expand_symtabs_matching instead of just the lookup name. * c-lang.c, d-lang.c, jv-lang.c, m2-lang.c, objc-lang.c, opencl-lang.c, p-lang.c, language.c: Delete field la_symbol_name_compare, and replace by NULL for new field la_get_symbol_name_match_p. * symfile.h (struct quick_symbol_functions): Update comment. 2012-01-25 Tom Tromey * breakpoint.c (bpstat_stop_status): Check 'breakpoint_at' before dereferencing. 2012-01-24 Tom Tromey PR symtab/12406: * solib.c (update_solib_list): Update the program space's added_solibs and deleted_solibs fields. * progspace.h (struct program_space) : New fields. (clear_program_space_solib_cache): Declare. * progspace.c (release_program_space): Call clear_program_space_solib_cache. (clear_program_space_solib_cache): New function. * infrun.c (handle_inferior_event) : Call bpstat_stop_status. Use handle_solib_event. * breakpoint.c: Include gdb_regex.h. (print_solib_event): New function. (bpstat_print): Use print_solib_event. (bpstat_stop_status): Add special case for bp_shlib_event. (handle_solib_event): New function. (bpstat_what): Use handle_solib_event. (struct solib_catchpoint): New. (dtor_catch_solib, insert_catch_solib, remove_catch_solib) (breakpoint_hit_catch_solib, check_status_catch_solib) (print_it_catch_solib, print_one_catch_solib) (print_mention_catch_solib, print_recreate_catch_solib): New functions. (catch_solib_breakpoint_ops): New global. (catch_load_or_unload, catch_load_command_1) (catch_unload_command_1): New functions. (internal_bkpt_check_status): Add special case for bp_shlib_event. (internal_bkpt_print_it): Use print_solib_event. (initialize_breakpoint_ops): Initialize catch_solib_breakpoint_ops. (_initialize_breakpoint): Register "catch load" and "catch unload". * breakpoint.h (handle_solib_event): Declare. * NEWS: Add entry for "catch load" and "catch unload". 2012-01-24 Tom Tromey * ada-lang.c: Include gdb_vecs.h. * charset.c: Include gdb_vecs.h. * tracepoint.h: Include gdb_vecs.h. * gdb_vecs.h: New file. 2012-01-24 Pedro Alves * breakpoint.c (breakpoint_hit_catch_fork) (breakpoint_hit_catch_vfork, breakpoint_hit_catch_syscall) (breakpoint_hit_catch_exec): Make use of the `ws' argument. * infrun.c (inferior_has_forked, inferior_has_vforked) (inferior_has_execd, inferior_has_called_syscall): Delete. (handle_syscall_event): Get syscall_number from the execution control state's wait status. (wait_for_inferior): Don't clear syscall_number. 2012-01-24 Pedro Alves * breakpoint.c (bpstat_check_location, bpstat_stop_status, pc_at_non_inline_function): Add `ws' parameter, and pass it down. (breakpoint_hit_catch_fork, breakpoint_hit_catch_vfork) (breakpoint_hit_catch_syscall, breakpoint_hit_catch_exec): Add `ws' parameter. (breakpoint_hit_ranged_breakpoint): Add `ws' parameter. Return false for events other than TARGET_SIGNAL_TRAP. (breakpoint_hit_watchpoint, base_breakpoint_breakpoint_hit): Add `ws' parameter. (bkpt_breakpoint_hit): Add `ws' parameter. Return false for events other than TARGET_SIGNAL_TRAP. (tracepoint_breakpoint_hit): Add `ws' parameter. * breakpoint.h (struct breakpoint_ops) : Add `ws' parameter. (bpstat_stop_status): Same. (pc_at_non_inline_function): Same. * infrun.c (handle_syscall_event, handle_inferior_event): Adjust to pass the current event's waitstatus to bpstat_stop_status and pc_at_non_inline_function. 2012-01-24 Jan Kratochvil Code cleanup. * cli/cli-cmds.c (source_script_from_stream): Never fclose STREAM. Update the function comment for it. (source_script_with_search): Call make_cleanup_fclose for STREAM. * cli/cli-script.c (script_from_file): Do not call make_cleanup_fclose for STREAM. 2012-01-24 Pedro Alves * breakpoint.c (bpstat_stop_status): Moving clearing print_it outside `bs->stop' block. (bpstat_what): Rework bp_shlib_event handling. (internal_bkpt_check_status): If the breakpoint is a bp_shlib_event, then set bs->stop and bs->print if stop_on_solib_events is set. 2012-01-24 Gary Benson Delete #if 0'd out code. * stack.c (print_frame_label_vars): Remove. (catch_info): Likewise. (_initialize_stack): Remove "info catch" command. * NEWS: Mention the above. 2012-01-24 Pedro Alves * remote.c (remote_add_inferior): New `fake_pid_p' parameter. Use it. (remote_notice_new_inferior): If the remote end doesn't support the multiprocess extensions, then the PID is fake. (add_current_inferior_and_thread): New. (remote_start_remote): Use it. (extended_remote_attach_1): Adjust. (extended_remote_create_inferior_1): Use add_current_inferior_and_thread. 2012-01-24 Jan Kratochvil Fix watchpoints to be specific for each inferior. * breakpoint.c (watchpoint_in_thread_scope): Verify also current_program_space. * i386-nat.c (i386_inferior_data_cleanup): New. (i386_inferior_data_get): Replace variable inf_data_local by an inferior_data call. (i386_use_watchpoints): Initialize i386_inferior_data. * linux-nat.c (linux_nat_iterate_watchpoint_lwps): Use INFERIOR_PTID specific iterate_over_lwps. 2012-01-24 Jan Kratochvil Fix watchpoints across inferior fork. * amd64-linux-nat.c (update_debug_registers_callback): Update the comment for linux_nat_iterate_watchpoint_lwps. (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use linux_nat_iterate_watchpoint_lwps. (amd64_linux_prepare_to_resume): New comment on Linux kernel. * i386-linux-nat.c (update_debug_registers_callback): Update the comment for linux_nat_iterate_watchpoint_lwps. (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use linux_nat_iterate_watchpoint_lwps. (i386_linux_prepare_to_resume): New comment on Linux kernel. * i386-nat.c: Include inferior.h. (dr_mirror): Remove. (i386_inferior_data, struct i386_inferior_data) (i386_inferior_data_get): New. (i386_debug_reg_state): Use i386_inferior_data_get. (i386_cleanup_dregs, i386_update_inferior_debug_regs) (i386_insert_watchpoint, i386_remove_watchpoint) (i386_stopped_data_address, i386_insert_hw_breakpoint) (i386_remove_hw_breakpoint): New variable state, use i386_debug_reg_state instead of DR_MIRROR. * linux-nat.c (delete_lwp): New declaration. (num_lwps): Move here from downwards. (delete_lwp_cleanup): New. (linux_child_follow_fork): Create new child_lp, call linux_nat_new_thread and linux_nat_prepare_to_resume before calling PTRACE_DETACH. (num_lwps): Move upwards. (linux_nat_iterate_watchpoint_lwps): New. * linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): New. (linux_nat_iterate_watchpoint_lwps_ftype): New declaration. 2012-01-24 Joel Brobecker GDB 7.4 released. 2012-01-23 Pedro Alves * top.c (caution): Rename to ... (confirm): ... this. (show_caution): Rename to ... (show_confirm): ... this. (quit_cover): Adjust. (init_main): Adjust. * top.h (caution): Rename to ... (confirm): ... this. * utils.c (internal_vproblem, defaulted_query): Adjust. 2012-01-23 Pedro Alves * top.c (caution): Update comment. (execute_command): Don't consider the current value of `caution'. 2012-01-23 Jan Kratochvil * cli/cli-cmds.c (find_and_open_script): Handle failure of fdopen. 2012-01-23 Ulrich Weigand * inf-child.c: Include "gdb_stat.h" instead of . * linux-tdep.c (linux_info_proc): Avoid ARI coding style warning. * target.c (target_fileio_pwrite): Remove buffer address from debug output. (target_fileio_pread): Likewise. 2012-01-20 Ulrich Weigand * NEWS: Document remote "info proc" and "generate-core-file". 2012-01-20 Ulrich Weigand * gdbarch.sh (find_memory_regions): New callback. * gdbarch.c, gdbarch.h: Regenerate. * gcore.c (gcore_memory_sections): Try gdbarch find_memory_regions callback before falling back to target method. * linux-nat.c (read_mapping, linux_nat_find_memory_regions): Remove. (linux_target_install_ops): No longer install it. * linux-tdep.c (linux_find_memory_regions): New function. (linux_init_abi): Install it. 2012-01-20 Ulrich Weigand * gdbarch.sh (make_corefile_notes): New architecture callback. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * gcore.c (write_gcore_file): Try gdbarch_make_corefile_notes before target_make_corefile_notes. If NULL is returned, the target does not support core file generation. * linux-nat.c: Include "linux-tdep.h". (find_signalled_thread, find_stop_signal): Remove. (linux_nat_do_thread_registers): Likewise. (struct linux_nat_corefile_thread_data): Likewise. (linux_nat_corefile_thread_callback): Likewise. (iterate_over_spus): Likewise. (struct linux_spu_corefile_data): Likewise. (linux_spu_corefile_callback): Likewise. (linux_spu_make_corefile_notes): Likewise. (linux_nat_collect_thread_registers): New function. (linux_nat_make_corefile_notes): Replace contents by call to linux_make_corefile_notes passing linux_nat_collect_thread_registers as native-only callback. * linux-tdep.h: Include "bfd.h". (struct regcache): Add forward declaration. (linux_collect_thread_registers_ftype): New typedef. (linux_make_corefile_notes): Add prototype. * linux-tdep.c: Include "gdbthread.h", "gdbcore.h", "regcache.h", "regset.h", and "elf-bfd.h". (find_signalled_thread, find_stop_signal): New functions. (linux_spu_make_corefile_notes): Likewise. (linux_collect_thread_registers): Likewise. (struct linux_corefile_thread_data): New data structure. (linux_corefile_thread_callback): New funcion. (linux_make_corefile_notes): Likewise. (linux_make_corefile_notes_1): Likewise. (linux_init_abi): Install it. 2012-01-20 Ulrich Weigand * gdbarch.sh (info_proc): New callback. * gdbarch.c, gdbarch.h: Regenerate. * infcmd.c (info_proc_cmd_1): Try gdbarch info_proc callback before falling back to the target info_proc callback. * linux-nat.c: Do not include "cli/cli-utils.h". (linux_nat_info_proc): Remove. (linux_target_install_ops): No longer install it. * linux-tdep.c: Include "cli/cli-utils.h" and . (read_mapping): New function. (linux_info_proc): Likewise. (linux_init_abi): Install it. 2012-01-20 Ulrich Weigand * defs.h (enum info_proc_what): Moved here from linux-nat.c * infcmd.c: (info_proc_cmd_1): New function. (info_proc_cmd): New function, moved here from equivalent routine orignally in linux-nat.c. (info_proc_cmd_mappings): Likewise. (info_proc_cmd_stat): Likewise. (info_proc_cmd_status): Likewise. (info_proc_cmd_cwd): Likewise. (info_proc_cmd_cmdline): Likewise. (info_proc_cmd_exe): Likewise. (info_proc_cmd_all): Likewise. (_initialize_infcmd): Install "info proc" command and subcommands. * target.h (struct target_ops): Add to_info_proc. (target_info_proc): Add prototype. * target.c (target_info_proc): New function. * procfs.c (procfs_info_proc): Add prototype. (info_proc_cmd): Rename into ... (procfs_info_proc): ... this. Update argument types as appropriate for a to_info_proc implementation. Handle "what" argument. (procfs_target): Install procfs_info_proc. (_initialize_procfs): No longer install "info proc" command. * linux-nat.c: (enum info_proc_what): Remove. (linux_nat_info_proc_cmd_1): Rename into ... (linux_nat_info_proc): ... this. Update argument types as appropriate for a to_info_proc implementation. (linux_nat_info_proc_cmd): Remove. (linux_nat_info_proc_cmd_mappings): Likewise. (linux_nat_info_proc_cmd_stat): Likewise. (linux_nat_info_proc_cmd_status): Likewise. (linux_nat_info_proc_cmd_cwd): Likewise. (linux_nat_info_proc_cmd_cmdline): Likewise. (linux_nat_info_proc_cmd_exe): Likewise. (linux_nat_info_proc_cmd_all): Likewise. (linux_target_install_ops): Install linux_nat_info_proc. (_initialize_linux_nat): No longer install "info proc" command and subcommands. 2012-01-20 Ulrich Weigand * configure.ac [AC_CHECK_FUNCS]: Check for readlink. * config.in, configure: Regenerate. * target.h (struct target_ops): Add to_fileio_readlink. (target_fileio_readlink): Add prototype. * target.c (target_fileio_readlink): New function. * inf-child.c: Conditionally include . (inf_child_fileio_readlink): New function. (inf_child_target): Install it. * remote.c (PACKET_vFile_readlink): New enum value. (remote_hostio_readlink): New function. (init_remote_ops): Install it. (_initialize_remote): Handle vFile:readlink packet type. 2012-01-20 Pedro Alves Ulrich Weigand * configure.ac [AC_CHECK_FUNCS]: Check for pread and pwrite. * config.in, configure: Regenerate. * target.h (struct target_ops): Add to_fileio_open, to_fileio_pwrite, to_fileio_pread, to_fileio_close, to_fileio_unlink. (target_fileio_open): Add prototype. (target_fileio_pwrite): Likewise. (target_fileio_pread): Likewise. (target_fileio_close): Likewise. (target_fileio_unlink): Likewise. (target_fileio_read_alloc): Likewise. (target_fileio_read_stralloc): Likewise. * target.c: Include "gdb/fileio.h". (target_read_stralloc): Accept trailing, but not embedded NUL bytes. (default_fileio_target): New function. (target_fileio_open): Likewise. (target_fileio_pwrite): Likewise. (target_fileio_pread): Likewise. (target_fileio_close): Likewise. (target_fileio_unlink): Likewise. (target_fileio_close_cleanup): Likewise. (target_fileio_read_alloc_1): Likewise. (target_fileio_read_alloc): Likewise. (target_fileio_read_stralloc): Likewise. * inf-child.c: Include "gdb/fileio.h", , , , and . (inf_child_fileio_open_flags_to_host): New function. (inf_child_errno_to_fileio_error): Likewise. (inf_child_fileio_open): Likewise. (inf_child_fileio_pwrite): Likewise. (inf_child_fileio_pread): Likewise. (inf_child_fileio_close): Likewise. (inf_child_fileio_unlink): Likewise. (inf_child_target): Install to_fileio routines. * remote.c (init_remote_ops): Install to_fileio routines. 2012-01-20 Pedro Alves Ulrich Weigand * remote.c (remote_multi_process_p): Only check for multi-process protocol feature, do not check for extended protocol. (remote_supports_multi_process): Check for extended protocol here. (set_general_process): Likewise. (extended_remote_kill): Likewise. (remote_pid_to_str): Likewise. (remote_query_supported): Always query multiprocess mode. 2012-01-20 Pedro Alves Ulrich Weigand * inferior.h (struct inferior): Add fake_pid_p. * inferior.c (exit_inferior_1): Clear fake_pid_p. * remote.c (remote_start_remote): Set fake_pid_p if we have to use magic_null_ptid since the remote side doesn't provide a real PID. 2012-01-19 Tom Tromey * NEWS: Combine the two Python sections. 2012-01-19 Jan Kratochvil * target.h (target_close): Update comment on the target's unpush state. 2012-01-19 Pedro Alves * linux-nat.c (linux_nat_close): Call linux_nat_is_async_p and linux_nat_async directly instead of going through the target vector. * target.c (unpush_target): Close target after unpushing it, not before. 2012-01-19 Gary Benson * mdebugread.c (sort_blocks): Replace integer constants with ones derived from FIRST_LOCAL_BLOCK. 2012-01-18 Paul Pluzhnikov Jan Kratochvil PR gdb/9538 * symfile.c (find_separate_debug_file): New function. (terminate_after_last_dir_separator): Likewise. (find_separate_debug_file_by_debuglink): Also try realpath. * configure.ac (AC_CHECK_FUNCS): Add lstat. * configure: Regenerate. * config.in: Regenerate. 2012-01-18 Doug Evans * Makefile.in (TARGET_SYSTEM_ROOT, TARGET_SYSTEM_ROOT_DEFINE): Delete. (main.o): Remove rule. * configure.ac (BINDIR): Define with AC_DEFINE_DIR. (--with-sysroot): Rewrite. * configure: Regenerate. * config.in: Regenerate. 2012-01-18 Sergio Durigan Junior * parse.c (initialize_expout): New function. (reallocate_expout): Likewise. (parse_exp_in_context): Use `initialize_expout' and `reallocate_expout' when appropriate. 2012-01-18 Pedro Alves * record.c (struct record_breakpoint, record_breakpoint_p) (record_breakpoints): New. (record_insert_breakpoint, record_remove_breakpoint): Manage record breakpoints list. Only remove breakpoints from the inferior if they had been inserted there in the first place. 2012-01-17 Doug Evans * linespec.c (decode_line_internal): Don't call symtabs_from_filename if we know we don't have a file name to look for. 2012-01-17 Pedro Alves * dwarf2-frame.c (dwarf2_frame_cfa): Throw NOT_AVAILABLE_ERROR, if the frame's stop reason is UNWIND_UNAVAILABLE. 2012-01-17 Jan Kratochvil Fix compilation error. * m2-exp.y (yyerror): Use ANSI C prototype. 2012-01-16 Sergio Durigan Junior * f-exp.y (parse_number): Convert prototype from K&R to ANSI C. (growbuf_by_size): Likewise. (yyerror): Likewise. * m2-exp.y (make_qualname): Remove function (was #if 0'ed). (modblock): Remove variable (was #if 0'ed). (parse_number): Convert prototype from K&R to ANSI C. (yyerror): Likewise. * objc-exp.y (parse_number): Likewise. (yyerror): Likewise. (yylex): Remove #if 0'ed code. * p-exp.y (uptok): Convert prototype from K&R to ANSI C. (yyerror): Likewise. 2012-01-16 Tom Tromey * NEWS: Add item. * symtab.h (compare_filenames_for_search): Declare. * symtab.c (compare_filenames_for_search): New function. (iterate_over_some_symtabs): Use it. * symfile.h (struct quick_symbol_functions) : Change spec. * psymtab.c (partial_map_symtabs_matching_filename): Use compare_filenames_for_search. Update for new spec. * dwarf2read.c (dw2_map_symtabs_matching_filename): Use compare_filenames_for_search. Update for new spec. * breakpoint.c (clear_command): Use compare_filenames_for_search. 2012-01-16 Tom Tromey PR python/13281: * gdbtypes.h (TYPE_FLAG_ENUM): New macro. (struct main_type) : New field. * dwarf2read.c (process_enumeration_scope): Detect "flag" enums. * NEWS: Add entries. * c-valprint.c (c_val_print) : Handle "flag" enums. * python/lib/gdb/printing.py (_EnumInstance): New class. (FlagEnumerationPrinter): Likewise. 2012-01-16 Sergio Durigan Junior * breakpoint.c (create_sals_from_address_default): New function. (create_breakpoints_sal_default): Likewise. (decode_linespec_default): Likewise. (is_marker_spec): Removed. (strace_marker_p): New function. (init_breakpoint_sal): Using `strace_marker_p' instead of `is_marker_spec'. (create_breakpoint): Call method `create_sals_from_address' from breakpoint_ops, replacing code that created SALs conditionally on the type of the breakpoint. Call method `create_breakpoints_sal', replacing code that created breakpoints conditionally on the type wanted. (base_breakpoint_create_sals_from_address): New function. (base_breakpoint_create_breakpoints_sal): Likewise. (base_breakpoint_decode_linespec): Likewise. (base_breakpoint_ops): Add methods `base_breakpoint_create_sals_from_address', `base_breakpoint_create_breakpoints_sal' and `base_breakpoint_decode_linespec'. (bkpt_create_sals_from_address): New function. (bkpt_create_breakpoints_sal): Likewise. (bkpt_decode_linespec): Likewise. (tracepoint_create_sals_from_address): Likewise. (tracepoint_create_breakpoints_sal): Likewise. (tracepoint_decode_linespec): Likewise. (strace_marker_create_sals_from_address): Likewise. (strace_marker_create_breakpoints_sal): Likewise. (strace_marker_decode_linespec): Likewise. (strace_marker_breakpoint_ops): New variable. (addr_string_to_sals): Remove `marker_spec'. Call method `decode_linespec' from breakpoint_ops, replacing code that decoded an address string into a SAL. Use `strace_marker_p' instead of `marker_spec'. (strace_command): Decide whether we are dealing with a static tracepoint with marker or not. Use the appropriate breakpoint_ops. (initialize_breakpoint_ops): Initialize new fields of breakpoint_ops. * breakpoint.h (linespec_result, linespec_sals): New forward declarations. (breakpoint_ops) , , : New methods. 2012-01-14 Doug Evans * NEWS: Update text for "maint set python print-stack". It is deprecated in gdb 7.4 and deleted in 7.5. 2012-01-13 Eli Zaretskii * gdb_curses.h (MOUSE_MOVED) [__MINGW32__]: Undefine before including curses.h. 2012-01-12 Jan Kratochvil * configure: Regenerate. * config.in: Regenerate. 2012-01-12 Keith Seitz PR mi/10586 * varobj.c (ANONYMOUS_STRUCT_NAME): Define. (ANONYMOUS_UNION_NAME): Define. (is_path_expr_parent): New function. (get_path_expr_parent): New function. (is_anonymous_child): New function. (create_child_with_value): If the child is anonymous and without a name, assign an object name to it. (c_describe_child): Use get_path_expr_parent to determine the parent expression. If there field represents an anonymous struct or union and has no name, set an appropriate display name and expression. (cplus_describe_child): Likewise. 2012-01-12 Pedro Alves * i386-tdep.c (i386_frame_cache_1): Also mark the frame base as available when %ebp is found to be zero (outermost). 2012-01-11 Andreas Tobler * common/gdb_assert.h (gdb_static_assert): Rename static_assert to an internal gdb_static_assert. * mi/mi-common.c: Rename static_assert to gdb_static_assert. 2012-01-11 Tom Tromey PR gdb/9598: * breakpoint.c (_initialize_breakpoint): Fix help for "catch catch" and "catch throw". 2012-01-11 Paul Hilfinger * blockframe.c (block_innermost_frame): Start search from selected frame, if present, or otherwise the current frame. * c-exp.y (variable): Update innermost_block for 'block COLONCOLON NAME' clause. * m2-exp.y (variable): Ditto. * objc-exp.y (variable): Ditto. 2012-01-10 Tom Tromey PR python/13199: * python/python.c (finish_python_initialization): Set sys.argv. 2012-01-10 Doug Evans * dwarf2read.c (dwarf_decode_lines): Remove arg "abfd". New arg "want_line_info". All callers updated. (dwarf_decode_lines_1): New function. (handle_DW_AT_stmt_list): Add function comment. New arg "want_line_info". All callers updated. (read_file_scope,read_type_unit_scope): Move comment from handle_DW_AT_stmt_list to here. 2012-01-10 Jan Kratochvil Fix regression after libiberty/ update for GCC PR 6057 and others. * c-exp.y (operator) (operator) : Add trailing space. * cp-name-parser.y (fill_comp, make_operator, make_dtor) (make_builtin_type, make_name): New variable i, add gdb_assert. (operator) : Update ARGS to 3. (operator) : Add trailing space. (operator) : Update ARGS to 3. (operator) : Add trailing space. * cp-support.c (cp_canonicalize_string): Check NULL from cp_comp_to_string, call warning and return. 2012-01-10 Jan Kratochvil Fix duplicate .o files after omitting libbfd.a. * Makefile.in (ALL_TARGET_OBS): Remove corelow.o. (SFILES): Add corelow.c. (COMMON_OBS): Add corelow.o. (ALLDEPFILES): Remove corelow.c. * config/alpha/alpha-linux.mh (NATDEPFILES): Remove corelow.o. * config/alpha/alpha-osf3.mh: Likewise. * config/alpha/fbsd.mh: Likewise. * config/arm/nbsdaout.mh: Likewise. * config/arm/nbsdelf.mh: Likewise. * config/i386/i386gnu.mh: Likewise. * config/ia64/hpux.mh: Likewise. * config/ia64/linux.mh: Likewise. * config/m32r/linux.mh: Likewise. * config/m68k/linux.mh: Likewise. * config/mips/irix5.mh: Likewise. * config/mips/irix6.mh: Likewise. * config/pa/hpux.mh: Likewise. * config/pa/linux.mh: Likewise. * config/powerpc/aix.mh: Likewise. * config/sparc/linux.mh: Likewise. * config/sparc/linux64.mh: Likewise. * config/sparc/sol2.mh: Likewise. * config/vax/vax.mh: Likewise. * configure.tgt (alpha*-*-freebsd* alpha*-*-kfreebsd*-gnu) (alpha*-*-netbsd*, alpha*-*-knetbsd*-gnu, alpha*-*-openbsd*) (am33_2.0*-*-linux*, arm*-wince-pe, arm*-*-mingw32ce*, arm*-*-linux*) (arm*-*-openbsd*, cris*, frv-*-*, hppa*-*-hpux*, hppa*-*-netbsd*) (hppa*-*-openbsd*, i[34567]86-*-dicos*, i[34567]86-*-freebsd*) (i[34567]86-*-kfreebsd*-gnu, i[34567]86-*-netbsd*) (i[34567]86-*-knetbsd*-gnu, i[34567]86-*-openbsd*, i[34567]86-*-nto*) (i[34567]86-*-solaris2.1[0-9]*, x86_64-*-solaris2.1[0-9]*) (i[34567]86-*-solaris*, i[34567]86-*-linux*, i[34567]86-*-cygwin*) (i[34567]86-*-mingw32*, m68*-*-netbsd*, m68*-*-knetbsd*-gnu) (m68*-*-openbsd*, m88*-*-openbsd*, microblaze*-linux-*) (microblaze*-*-linux*, mips*-*-linux*, mips*-*-netbsd*) (mips*-*-knetbsd*-gnu, mips64*-*-openbsd*, powerpc-*-netbsd*) (powerpc-*-knetbsd*-gnu, powerpc-*-openbsd*, powerpc-*-linux*) (powerpc64-*-linux*, s390*-*-*, score-*-*, sh*-*-linux*) (sh*-*-netbsdelf*, sh*-*-knetbsd*-gnu, sh*-*-openbsd*) (sparc*-*-freebsd*, sparc*-*-kfreebsd*-gnu, sparc-*-netbsd*) (sparc-*-knetbsd*-gnu, sparc64-*-netbsd*, sparc64-*-knetbsd*-gnu) (sparc-*-openbsd*, sparc64-*-openbsd*, tic6x-*-*linux, vax-*-netbsd*) (vax-*-knetbsd*-gnu, vax-*-openbsd*, x86_64-*-dicos*, x86_64-*-linux*) (x86_64-*-freebsd*, x86_64-*-kfreebsd*-gnu, x86_64-*-netbsd*) (x86_64-*-knetbsd*-gnu, x86_64-*-openbsd*, xtensa*-*-linux*): Remove corelow.o from gdb_target_obs. * corefile.c (core_target): Update the comment on NULL value. (core_file_command): Replace error by gdb_assert on CORE_TARGET. * corelow.c (sniff_core_bfd): Call error instead of warning on zero MATCHES. Drop YUMMY set on NULL. (core_close): Do not call exit_inferior_silent on zero PID. Do not reclaim CORE_DATA if it is already NULL. 2012-01-09 Doug Evans * gdbtypes.c (safe_parse_type): Initialize type to keep gcc happy. * varobj.c (varobj_set_value): Initialize val,value to keep gcc happy. 2012-01-09 Keith Seitz * breakpoint.c (wrapper.h): Don't include. 2012-01-09 Keith Seitz * Makefile.in (SFILES): Remove wrapper.c. (HFILES_NO_SRCDIR): Remove wrapper.h. (COMMON_OBS): Remove wrapper.o. * cli/cli-interp.c: Don't inlude wrapper.h. * corelow.c: Likewise. (core_open): Replace gdb_target_find_new_threads with TRY_CATCH around target_find_new_threads. * eval.c (fetch_subexp_value): Likewise for value_fetch_lazy. * gdbtypes.c (safe_parse_type): Likewise for parse_and_eval_type. * varobj.c (varobj_create): Likewise for parse_exp_1 and evaluate_expression. (varobj_set_value): Likewise for evaluate_expression and value_assign. (install_new_variable): Likewise for value_fetch_lazy. (adjust_value_for_child_access): Likewise for value_ind. (c_describe_child): Likewise for value_subscript and value_ind. (c_value_of_root): Likewise for evaluate_expression. * wrapper.c: Remove. * wrapper.h: Remove. 2012-01-09 Doug Evans * dwarf2read.c (read_and_check_comp_unit_head): Renamed from partial_read_comp_unit_head. Replace "buffer", "buffer_size" and "abfd" args with "section". All callers updated. Error checking code moved ... (error_check_comp_unit_head): ... here. New function. (read_and_check_type_unit_head): Renamed from read_type_unit_head. Delete arg "abfd". New arg "type_offset". All callers updated. (create_debug_types_hash_table): Simplify by using read_and_check_type_unit_head. * parser-defs.h (namecopy): Delete. * parse.c (namecopy, namecopy_size): Move into copy_name. 2012-01-09 Jan Kratochvil Partially fix duplicate .o files after omitting libbfd.a. * config/alpha/alpha-osf3.mh (NATDEPFILES): Remove solib.o. * config/i386/nbsdaout.mh (NATDEPFILES): Remove solib.o. * config/i386/obsdaout.mh (NATDEPFILES): Remove solib.o. * config/m68k/nbsdaout.mh (NATDEPFILES): Remove solib.o. * config/m68k/obsd.mh (NATDEPFILES): Remove solib.o. * config/powerpc/aix.mh (NATDEPFILES): Remove xcoffread.o. * config/vax/nbsdaout.mh (NATDEPFILES): Remove solib.o. 2012-01-09 Pedro Alves * MAINTAINERS: Update my email address. 2012-01-08 Doug Evans * dwarf2read.c (dwarf2_per_objfile): Rename n_type_comp_units to n_type_units. Rename type_comp_units to all_type_units. All uses updated. (add_signatured_type_cu_to_table): Renamed from add_signatured_type_cu_to_list. All callers updated. * gdbtypes.h (struct cplus_struct_type): Delete member nfn_fields_total. All uses removed. 2012-01-06 Doug Evans * dwarf2read.c: Move FIXME from dwarf2_build_psymtabs_hard to top of file. (dwarf2_find_comp_unit): Delete. (process_psymtab_comp_unit): Make result "void". Delete args buffer, info_ptr, buffer_size, and replace with "section". All callers updated. (dwarf2_build_psymtabs_hard): Simplify. 2012-01-06 Sergio Durigan Junior Thiago Jung Bauermann * ada-lang.c (ada_exception_name_addr): Add `volatile' keyword before `struct gdb_exception'. * breakpoint.c (update_global_location_list_nothrow) (update_breakpoint_locations, enable_breakpoint_disp): Likewise. * cp-abi.c (value_rtti_type): Likewise. * cp-support.c (cp_validate_operator): Likewise. * infrun.c (insert_exception_resume_breakpoint) (check_exception_resume, keep_going): Likewise. * mi-interp.c (mi_breakpoint_created) (mi_breakpoint_modified): Likewise. * rs6000-aix-tdep.c (rs6000_convert_from_func_ptr_addr): Likewise. * solib-ia64-hpux.c (ia64_hpux_at_dld_breakpoint_p) (ia64_hpux_handle_dld_breakpoint_1): Likewise. 2012-01-05 Doug Evans * dwarf2read.c (statement_prologue): Delete, unused. * dwarf2read.c (dwarf2_per_cu_addr_size): Make result type an int. * dwarf2loc.h (dwarf2_per_cu_addr_size): Update. * dwarf2read.c (comp_unit_header): Delete, unused. 2012-01-05 Ulrich Weigand * configure.tgt [s390*-*-*] (gdb_target_obs): Add corelow.o. * config/s390/s390.mh (NATDEPFILES): Remove corelow.o. 2012-01-05 Khoo Yit Phang * infrun.c (normal_stop): Don't skip calling the normal_stop observers if the thread was doing a multi-step, but stopped for some reason other than stepping. 2012-01-05 Pedro Alves * cli/cli-decode.h: Add comments. (CMD_LIST_AMBIGUOUS): Moved to command.h (add_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd) (set_cmd_cfunc, set_cmd_sfunc, set_cmd_completer, cmd_cfunc_eq) (set_cmd_context, get_cmd_context, lookup_cmd, lookup_cmd_1) (deprecate_cmd, deprecated_cmd_warning, lookup_cmd_composition) (add_com, add_com_alias, add_info, add_info_alias) (complete_on_cmdlist, complete_on_enum, help_list): Remove declarations. * command.h: Add and adjust comments. (CMD_LIST_AMBIGUOUS): Moved here. (help_cmd, help_cmd_list): Delete declarations. 2012-01-04 Doug Evans * dwarf2read.c (dwarf2_read_abbrevs): Delete arg "abfd". All callers updated. (load_full_type_unit): Renamed from read_signatured_type_at_offset. Replace all arguments with "per_cu". All callers updated. * dwarf2read.c (dwarf2_per_cu_data): Remove outdated comment. * dwarf2read.c (init_one_comp_unit): Delete arg "objfile". New arg "per_cu". All callers updated. Delete #if 0'd out code. * language.c (binop_result_type): Delete. (simple_type, ordered_type, same_type, integral_type): Delete. (numeric_type, character_type, string_type, boolean_type): Delete. (float_type, structured_type): Delete. * language.h: Update. 2012-01-04 Tom Tromey * python/py-value.c (valpy_binop): Initialize 'res_val'. 2012-01-04 Joel Brobecker * corefile.c (close_exec_file): Delete. (reopen_exec_file): Remove commented out code that seems related to close_exec_file, which is being deleted here. * inferior.h (close_exec_file): Delete. * fork-child.c (fork_inferior): Remove call to fork_inferior. 2012-01-04 Joel Brobecker * ada-lang.c: #include "cli/cli-utils.h". (get_selections): Use skip_spaces. (ada_get_next_arg): Use skip_spaces and skip_to_space. (catch_ada_exception_command_split): Use skip_spaces. (ada_decode_assert_location): Likewise. 2012-01-04 Joel Brobecker * linespec.c (decode_line_internal): Check for C++ or Java compound constructs only if the current language is C, C++ or Java. 2012-01-04 Jan Kratochvil Revert: 2012-01-02 Jan Kratochvil Joel Brobecker Fix regression for gdb.cp/gdb2495.exp with gcc-4.7. * arch-utils.c (displaced_step_at_entry_point): Incrase BP_LEN skip to 3 times. * infcall.c (call_function_by_hand) : Move it upwards and fall through into AT_ENTRY_POINT. (call_function_by_hand) : New variable bp_len. Adjust DUMMY_ADDR with it. * ppc-linux-tdep.c (ppc_linux_displaced_step_location): Increase PPC_INSN_SIZE skip to 3 times. 2012-01-04 Joel Brobecker * linespec.c (add_minsym): Preserve function descriptors. 2012-01-04 Ulrich Weigand * breakpoint.c (all_locations_are_pending): Consider locations in program spaces executing during startup pending as well. 2012-01-04 Joel Brobecker Copyright year update in most files of the GDB Project. 2012-01-04 Joel Brobecker * copyright.sh: Delete. * copyright.py: Rewrite. 2012-01-04 Joel Brobecker * gnulib/extra/update-copyright: New file, imported from gnulib. 2012-01-04 Joel Brobecker * README (Copyright and License Notices): New section. 2012-01-03 Tom Tromey PR python/12533: * python/py-value.c (valpy_dereference, valpy_get_address valpy_get_dynamic_type, valpy_lazy_string, valpy_do_cast) (valpy_getitem, valpy_call, valpy_binop, valpy_negative) (valpy_absolute, valpy_richcompare): Free intermediate values. 2011-01-03 Joel Brobecker * ada-lang.c: Reformat the copyright notice. 2012-01-02 Jan Kratochvil * Makefile.in (ALL_TARGET_OBS): Remove solib-target.o. * configure.tgt (arm*-wince-pe, arm*-*-mingw32ce*, arm*-*-symbianelf*) (i[34567]86-*-dicos*, i[34567]86-*-cygwin*, i[34567]86-*-mingw32*) (x86_64-*-dicos*, x86_64-*-mingw*): Remove solib-target.o. Revert this part of: 2012-01-02 Jan Kratochvil Build gdb directly from *.o files not using libgdb.a. * Makefile.in (COMMON_OBS): Remove solib-target.o. 2012-01-02 Joel Brobecker * gdb/common/gdb_thread_db.h, gdb/dbxread.c, gdb/environ.c, gdb/gcore.h, gdb/rs6000-tdep.h, gdb/s390-nat.c, gdb/tic6x-tdep.c: Reformat the copyright header. 2012-01-02 Jan Kratochvil Revert this part of: 2012-01-02 Jan Kratochvil Remove the gdbtui binary. * gdb.c (main): Remove args.interpreter_p initialization. * main.c (captured_main): Set INTERPRETER_P directly by INTERP_CONSOLE. * main.h (struct captured_main_args): Remove interpreter_p. 2012-01-02 Joel Brobecker * config/djgpp/fnchange.lst: Add entry for ChangeLog-2011. 2012-01-02 Joel Brobecker * top.c (print_gdb_version): Update copyright year. 2012-01-02 Yao Qi * inf-ptrace.c (inf_ptrace_xfer_partial): Reindent. 2012-01-02 Jan Kratochvil Joel Brobecker Fix regression for gdb.cp/gdb2495.exp with gcc-4.7. * arch-utils.c (displaced_step_at_entry_point): Incrase BP_LEN skip to 3 times. * infcall.c (call_function_by_hand) : Move it upwards and fall through into AT_ENTRY_POINT. (call_function_by_hand) : New variable bp_len. Adjust DUMMY_ADDR with it. * ppc-linux-tdep.c (ppc_linux_displaced_step_location): Increase PPC_INSN_SIZE skip to 3 times. 2012-01-02 Jan Kratochvil * amd64-linux-nat.c (update_debug_registers_callback): New comment on the return value. * i386-linux-nat.c (update_debug_registers_callback): Likewise. 2012-01-02 Jan Kratochvil Build gdb directly from *.o files not using libgdb.a. * Makefile.in (SUBDIR_TUI_OBS): Remove duplicate tui.o. (COMMON_OBS): Remove solib-target.o. (LIBGDB_OBS, libgdb.a): Move it before the gdb$(EXEEXT) rule. (gdb$(EXEEXT)): Replace libgdb.a with $(LIBGDB_OBS). (LIBGDB_OBS, libgdb.a): Move it above. * configure.tgt (alpha*-*-linux*, alpha*-*-freebsd*) (alpha*-*-kfreebsd*-gnu, alpha*-*-netbsd*, alpha*-*-knetbsd*-gnu) (alpha*-*-openbsd*, am33_2.0*-*-linux*, arm*-wince-pe) (arm*-*-mingw32ce*, arm*-*-linux*, arm*-*-netbsd*, arm*-*-knetbsd*-gnu) (arm*-*-openbsd*, cris*, frv-*-*, hppa*-*-hpux*, hppa*-*-linux*) (hppa*-*-netbsd*, hppa*-*-openbsd*, i[34567]86-*-darwin*) (i[34567]86-*-dicos*, i[34567]86-*-freebsd*, i[34567]86-*-kfreebsd*-gnu) (i[34567]86-*-netbsd*, i[34567]86-*-knetbsd*-gnu, i[34567]86-*-openbsd*) (i[34567]86-*-nto*, i[34567]86-*-solaris2.1[0-9]*) (x86_64-*-solaris2.1[0-9]*, i[34567]86-*-solaris*, i[34567]86-*-linux*) (i[34567]86-*-gnu*, ia64-*-linux*, m32r*-*-linux*, m68*-*-linux*) (m68*-*-netbsd*, m68*-*-knetbsd*-gnu, m68*-*-openbsd*) (microblaze*-linux-*, microblaze*-*-linux*, mips*-sgi-irix5*) (mips*-sgi-irix6*, mips*-*-linux*, mips*-*-netbsd*) (mips*-*-knetbsd*-gnu, mips64*-*-openbsd*, powerpc-*-netbsd*) (powerpc-*-knetbsd*-gnu, powerpc-*-openbsd*, powerpc-*-aix*, rs6000-*-*) (powerpc-*-linux*, powerpc64-*-linux*, powerpc*-*-*, s390*-*-*) (sh*-*-linux*, sh*-*-netbsdelf*, sh*-*-knetbsd*-gnu, sh*-*-openbsd*) (sparc-*-linux*, sparc64-*-linux*, sparc*-*-freebsd*) (sparc*-*-kfreebsd*-gnu, sparc-*-netbsd*, sparc-*-knetbsd*-gnu) (sparc64-*-netbsd*, sparc64-*-knetbsd*-gnu, sparc-*-openbsd*) (sparc64-*-openbsd*, sparc-*-solaris2.[0-6], sparc-*-solaris2.[0-6].*) (sparc-*-solaris2*, sparcv9-*-solaris2*, sparc64-*-solaris2*) (vax-*-netbsd*, vax-*-knetbsd*-gnu, x86_64-*-darwin*, x86_64-*-dicos*) (x86_64-*-linux*, x86_64-*-freebsd*, x86_64-*-kfreebsd*-gnu) (x86_64-*-netbsd*, x86_64-*-knetbsd*-gnu, x86_64-*-openbsd*) (xtensa*-*-linux*, xtensa*): Remove solib.o from gdb_target_obs. 2012-01-02 Jan Kratochvil Remove the gdbtui binary. * .gitignore (/gdbtui): Remove. * Makefile.in (TUI): Remove. (SUBDIR_TUI_OBS): Remove tui-main.o. (SUBDIR_TUI_SRCS): Remove tui/tui-main.c. (all-tui, install-tui, uninstall-tui, $(TUI)$(EXEEXT), clean-tui) (tui-main.o): Remove. (all_object_files): Remove tui-main.o. * NEWS: New note for the gdbtui removal. * configure: Rebuilt. * configure.ac: No longer add all-tui, clean-tui, install-tui and uninstall-tui to CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL and CONFIG_UNINSTALL respectively. * gdb.c (main): Remove args.interpreter_p initialization. * main.c (captured_main): Set INTERPRETER_P directly by INTERP_CONSOLE. * main.h (struct captured_main_args): Remove interpreter_p. * tui/tui-main.c: Remove. 2012-01-01 Doug Evans * dwarf2read.c (dwarf2_compute_name): Simplify objfile references. (dwarf2_physname, read_import_statement): Ditto. (read_call_site_scope, dwarf2_record_block_ranges): Ditto. (process_structure_scope read_subroutine_type): Ditto. (read_typedef, load_partial_dies, read_partial_die): Ditto. (find_partial_die, dwarf_decode_lines, lookup_die_type): Ditto. (dwarf2_fetch_die_location_block): Ditto. (dwarf_decode_macros, dwarf2_symbol_mark_computed): Ditto. * dwarf2read.c (read_signatured_type): Delete `objfile' arg. All callers updated. (load_full_comp_unit, queue_comp_unit, process_queue): Ditto. (dw2_do_instantiate_symtab, dw2_instantiate_symtab): Ditto. (process_psymtab_comp_unit, load_partial_comp_unit): Ditto. * dwarf2read.c (load_cu): Move assert to more useful location. * dwarf2read.c (free_heap_comp_unit): Renamed from free_one_comp_unit. All callers updated. * dwarf2read.c (dwarf2_per_objfile): Add comment. (dwarf2_elf_names): Minor reformat. (dwarf2_per_cu_data): Tweak comment. (dwarf2_read_section): Fix comment. (create_all_comp_units): Fix comment. (load_full_comp_unit): Fix comment. (process_full_comp_unit): Fix comment. (read_signatured_type): Fix comment. For older changes see ChangeLog-2011. Local Variables: mode: change-log left-margin: 8 fill-column: 74 version-control: never coding: utf-8 End: