2012-05-15 James Murray Stephane Carrez * configure.in: Add S12X and XGATE co-processor support to m68hc11 target. * disassemble.c: Likewise. * configure: Regenerate. * m68hc11-dis.c: Make objdump output more consistent, use hex instead of decimal and use 0x prefix for hex. * m68hc11-opc.c: Add S12X and XGATE opcodes. 2012-05-14 James Lemke * ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle. (PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines. (vle_opcd_indices): New array. (lookup_vle): New function. (disassemble_init_powerpc): Revise for second (VLE) opcode table. (print_insn_powerpc): Likewise. * ppc-opc.c: Likewise. 2012-05-14 Catherine Moore Maciej W. Rozycki Rhonda Wittels Nathan Froyd * ppc-opc.c (insert_arx, extract_arx): New functions. (insert_ary, extract_ary): New functions. (insert_li20, extract_li20): New functions. (insert_rx, extract_rx): New functions. (insert_ry, extract_ry): New functions. (insert_sci8, extract_sci8): New functions. (insert_sci8n, extract_sci8n): New functions. (insert_sd4h, extract_sd4h): New functions. (insert_sd4w, extract_sd4w): New functions. (insert_vlesi, extract_vlesi): New functions. (insert_vlensi, extract_vlensi): New functions. (insert_vleui, extract_vleui): New functions. (insert_vleil, extract_vleil): New functions. (BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT. (BI16, BI32, BO32, B8): New. (B15, B24, CRD32, CRS): New. (CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG. (DB, IMM20, RD, Rx, ARX, RY, RZ): New. (ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New. (SH6_MASK): Use PPC_OPSHIFT_INV. (SI8, UI5, OIMM5, UI7, BO16): New. (VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New. (XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV. (ALLOW8_SPRG): New. (insert_sprg, extract_sprg): Check ALLOW8_SPRG. (OPVUP, OPVUP_MASK OPVUP): New (BD8, BD8_MASK, BD8IO, BD8IO_MASK): New. (EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New. (BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New. (BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New. (IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New. (IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New. (SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New. (SE_IM5, SE_IM5_MASK): New. (SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New. (EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New. (BO32DNZ, BO32DZ): New. (NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE. (PPCVLE): New. (powerpc_opcodes): Add new VLE instructions. Update existing instruction to include PPCVLE if supported. * ppc-dis.c (ppc_opts): Add vle entry. (get_powerpc_dialect): New function. (powerpc_init_dialect): VLE support. (print_insn_big_powerpc): Call get_powerpc_dialect. (print_insn_little_powerpc): Likewise. (operand_value_powerpc): Handle negative shift counts. (print_insn_powerpc): Handle 2-byte instruction lengths. 2012-05-11 Daniel Richard G. PR binutils/14028 * configure.in: Invoke ACX_HEADER_STRING. * configure: Regenerate. * config.in: Regenerate. * sysdep.h: If STRINGS_WITH_STRING is defined then include both string.h and strings.h. 2012-05-11 Nick Clifton PR binutils/14006 * arm-dis.c (print_insn): Fix detection of instruction mode in files containing multiple executable sections. 2012-05-03 Sean Keys * Makefile.in, configure: regenerate * disassemble.c (disassembler): Recognize ARCH_XGATE. * xgate-dis.c (read_memory, print_insn, print_insn_xgate): New functions. * configure.in: Recognize xgate. * xgate-dis.c, xgate-opc.c: New files for support of xgate * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly and opcode generation for xgate. 2012-04-30 DJ Delorie * rx-decode.opc (MOV): Do not sign-extend immediates which are already the maximum bit size. * rx-decode.c: Regenerate. 2012-04-27 David S. Miller * sparc-dis.c (v9a_asr_reg_names): Add 'cfr'. * sparc-opc.c (sparc_opcodes): Add rd/wr cases for %cfr. * sparc-opc.c (sparc_opcodes): Add 'wr X, %pause' and 'pause'. * sparc-dis.c (v9a_asr_reg_names): Add 'pause'. * sparc-opc.c (CBCOND): New define. (CBCOND_XCC): Likewise. (cbcond): New helper macro. (sparc_opcodes): Add compare-and-branch instructions. * sparc-dis.c (print_insn_sparc): Handle ')'. * sparc-opc.c (sparc_opcodes): Add crypto instructions. * sparc-opc.c (sparc_opcodes): Rework table to put HWCAP values into new struct sparc_opcode 'hwcaps' field instead of 'flags'. 2012-04-12 David S. Miller * sparc-dis.c (X_DISP10): Define. (print_insn_sparc): Handle '='. 2012-04-01 Mike Frysinger * bfin-dis.c (fmtconst): Replace decimal handling with a single sprintf call and the '*' field width. 2012-03-23 Maxim Kuvyrkov * mips-dis.c (mips_arch_choices): Add entry for Broadcom XLP. 2012-03-16 Alan Modra * ppc-dis.c (PPC_OPC_SEGS, PPC_OP_TO_SEG): Delete. (powerpc_opcd_indices): Bump array size. (disassemble_init_powerpc): Set powerpc_opcd_indices entries corresponding to unused opcodes to following entry. (lookup_powerpc): New function, extracted and optimised from.. (print_insn_powerpc): ..here. 2012-03-15 Alan Modra James Lemke * disassemble.c (disassemble_init_for_target): Handle ppc init. * ppc-dis.c (private): New var. (powerpc_init_dialect): Don't return calloc failure, instead use private. (PPC_OPCD_SEGS, PPC_OP_TO_SEG): Define. (powerpc_opcd_indices): New array. (disassemble_init_powerpc): New function. (print_insn_big_powerpc): Don't init dialect here. (print_insn_little_powerpc): Likewise. (print_insn_powerpc): Start search using powerpc_opcd_indices. 2012-03-10 Edmar Wienskoski * ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500". * ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New. (PPCVEC2, PPCTMR, E6500): New short names. (powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt, mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx, lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl, lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl, lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC optional operands on sync instruction for E6500 target. 2012-03-08 Andreas Krebbel * s390-opc.txt: Set instruction type of pku to SS_L2RDRD. 2012-02-27 Alan Modra * mt-dis.c: Regenerate. 2012-02-27 Alan Modra * v850-opc.c (extract_v8): Rearrange to make it obvious this is the inverse of corresponding insert function. (extract_d22, extract_u9, extract_r4): Likewise. (extract_d9): Correct sign extension. (extract_d16_15): Don't assume "long" is 32 bits, and don't rely on implementation defined behaviour for shift right of signed types. (extract_d16_16, extract_d17_16, extract_i9): Likewise. (extract_d23): Likewise, and correct mask. 2012-02-27 Alan Modra * crx-dis.c (print_arg): Mask constant to 32 bits. * crx-opc.c (cst4_map): Use int array. 2012-02-27 Alan Modra * arc-dis.c (BITS): Don't use shifts to mask off bits. (FIELDD): Sign extend with xor,sub. 2012-02-25 Walter Lee * tilegx-opc.c: Handle TILEGX_OPC_LD4S_TLS and TILEGX_OPC_LD_TLS. * tilepro-opc.c: Handle TILEPRO_OPC_LW_TLS and TILEPRO_OPC_LW_TLS_SN. 2012-02-21 H.J. Lu * i386-opc.h (HLEPrefixNone): New. (HLEPrefixLock): Likewise. (HLEPrefixAny): Likewise. (HLEPrefixRelease): Likewise. 2012-02-08 H.J. Lu * i386-dis.c (HLE_Fixup1): New. (HLE_Fixup2): Likewise. (HLE_Fixup3): Likewise. (Ebh1): Likewise. (Evh1): Likewise. (Ebh2): Likewise. (Evh2): Likewise. (Ebh3): Likewise. (Evh3): Likewise. (MOD_C6_REG_7): Likewise. (MOD_C7_REG_7): Likewise. (RM_C6_REG_7): Likewise. (RM_C7_REG_7): Likewise. (XACQUIRE_PREFIX): Likewise. (XRELEASE_PREFIX): Likewise. (dis386): Use Ebh1/Evh1 on add, adc, and, btc, btr, bts, cmpxchg, dec, inc, neg, not, or, sbb, sub, xor and xadd. Use Ebh2/Evh2 on xchg. Use Ebh3/Evh3 on mov. (reg_table): Use Ebh1/Evh1 on add, adc, and, dec, inc, neg, not, or, sbb, sub and xor. Use Ebh3/Evh3 on mov. Use MOD_C6_REG_7 and MOD_C7_REG_7. (mod_table): Add MOD_C6_REG_7 and MOD_C7_REG_7. (rm_table): Add RM_C6_REG_7 and RM_C7_REG_7. Add xend and xtest. (prefix_name): Handle XACQUIRE_PREFIX and XRELEASE_PREFIX. (CMPXCHG8B_Fixup): Handle HLE prefix on cmpxchg8b. * i386-gen.c (cpu_flag_init): Add CPU_HLE_FLAGS and CPU_RTM_FLAGS. (cpu_flags): Add CpuHLE and CpuRTM. (opcode_modifiers): Add HLEPrefixOk. * i386-opc.h (CpuHLE): New. (CpuRTM): Likewise. (HLEPrefixOk): Likewise. (i386_cpu_flags): Add cpuhle and cpurtm. (i386_opcode_modifier): Add hleprefixok. * i386-opc.tbl: Add HLEPrefixOk=3 to mov. Add HLEPrefixOk to add, adc, and, btc, btr, bts, cmpxchg, dec, inc, neg, not, or, sbb, sub, xor and xadd. Add HLEPrefixOk=2 to xchg with memory operand. Add xacquire, xrelease, xabort, xbegin, xend and xtest. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. 2012-01-24 DJ Delorie * rl78-decode.opc (rl78_decode_opcode): Add NOT1. * rl78-decode.c: Regenerate. 2012-01-17 James Murray PR binutils/10173 * cr16-dis.c (print_arg): Test symtab_size not num_symbols. 2012-01-17 Andreas Schwab * m68k-opc.c (m68k_opcodes): Fix entries for pmove with BADx/BACx register and move them after pmove with PSR/PCSR register. 2012-01-13 H.J. Lu * i386-dis.c (mod_table): Add vmfunc. * i386-gen.c (cpu_flag_init): Add CPU_VMFUNC_FLAGS. (cpu_flags): CpuVMFUNC. * i386-opc.h (CpuVMFUNC): New. (i386_cpu_flags): Add cpuvmfunc. * i386-opc.tbl: Add vmfunc. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. For older changes see ChangeLog-2011 Local Variables: mode: change-log left-margin: 8 fill-column: 74 version-control: never End: