start-sanitize-v850 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com) * v850-opc.c (v850_operansd): 3-bit immediate for bit insns is unsigned. * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and short store word (sst.w). Thu Aug 22 16:57:27 1996 J.T. Conklin * v850-opc.c (v850_operands): Added insert and extract fields, pointers to functions that handle unusual operand encodings. Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com) * v850-opc.c (v850_opcodes): Enable "trap". * v850-opc.c (v850_opcodes): Fix order of displacement and register for "set1", "clr1", "not1", and "tst1". Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com) * v850-opc.c (v850_operands): Add "B3" support. (v850_opcodes): Fix and enable "set1", "clr1", "not1" and "tst1". * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand. * v850-opc.c: Close unterminated comment. Wed Aug 21 17:31:26 1996 J.T. Conklin * v850-opc.c (v850_operands): Add flags field. (v850_opcodes): add move opcodes. Tue Aug 20 14:41:03 1996 J.T. Conklin * Makefile.in (ALL_MACHINES): Add v850-opc.o. * configure: (bfd_v850v_arch) Add new case. * configure.in: (bfd_v850_arch) Add new case. * v850-opc.c: New file. end-sanitize-v850 Mon Aug 19 15:21:38 1996 Doug Evans * sparc-dis.c (print_insn_sparc): Handle little endian sparcs. start-sanitize-d10v Thu Aug 15 13:14:43 1996 Martin M. Hunt * d10v-opc.c: Add additional information to the opcode table to help determinine which instructions can be done in parallel. end-sanitize-d10v Thu Aug 15 13:11:13 1996 Stan Shebs * mpw-make.sed: Update editing of include pathnames to be more general. Thu Aug 15 16:28:41 1996 James G. Smith * arm-opc.h: Added "bx" instruction definition. Wed Aug 14 17:00:04 1996 Richard Henderson * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5. start-sanitize-d10v Mon Aug 12 14:30:37 1996 Martin M. Hunt * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l. Fri Aug 9 13:21:59 1996 Martin M. Hunt * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER. end-sanitize-d10v Thu Aug 8 12:43:52 1996 Klaus Kaempf * makefile.vms: Update for alpha-opc changes. Wed Aug 7 11:55:10 1996 Ian Lance Taylor * i386-dis.c (print_insn_i386): Actually return the correct value. (ONE, OP_ONE): #ifdef out; not used. start-sanitize-d10v Fri Aug 2 17:47:03 1996 Martin M. Hunt * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions. Changed subi operand type to treat 0 as 16. end-sanitize-d10v Wed Jul 31 16:21:41 1996 Ian Lance Taylor * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose . Wed Jul 31 14:39:27 1996 James G. Smith * arm-opc.h: (arm_opcodes): Added halfword and sign-extension memory transfer instructions. Add new format string entries %h and %s. * arm-dis.c: (print_insn_arm): Provide decoding of the new formats %h and %s. start-sanitize-d10v Fri Jul 26 11:45:04 1996 Martin M. Hunt * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift. (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S. end-sanitize-d10v Fri Jul 26 14:01:43 1996 Ian Lance Taylor * alpha-dis.c (print_insn_alpha_osf): Remove. (print_insn_alpha_vms): Remove. (print_insn_alpha): Make globally visible. Chose the register names based on info->flavour. * disassemble.c: Always return print_insn_alpha for the alpha. start-sanitize-d10v Thu Jul 25 15:24:17 1996 Martin M. Hunt * d10v-dis.c (dis_long): Handle unknown opcodes. Thu Jul 25 12:08:09 1996 Martin M. Hunt * d10v-opc.c: Changes to support signed and unsigned numbers. All instructions with the same name that have long and short forms now end in ".l" or ".s". Divs added. * d10v-dis.c: Changes to support signed and unsigned numbers. Tue Jul 23 11:02:53 1996 Martin M. Hunt * d10v-dis.c: Change all functions to use info->print_address_func. end-sanitize-d10v Mon Jul 22 15:38:53 1996 Andreas Schwab * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire move ccr/sr insns more strict so that the disassembler only selects them when the addressing mode is data register. start-sanitize-d10v Mon Jul 22 11:25:24 1996 Martin M. Hunt * d10v-opc.c (pre_defined_registers): Declare. * d10v-dis.c (print_operand): Now uses pre_defined_registers to pick a better name for the registers. end-sanitize-d10v Mon Jul 22 13:47:23 1996 Ian Lance Taylor * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix operands for fexpand and fpmerge. From Christian Kuehnke . Mon Jul 22 13:17:06 1996 Richard Henderson * alpha-dis.c (print_insn_alpha): No longer the user-visible print routine. Take new regnames and cpumask arguments. Kill the environment variable nonsense. (print_insn_alpha_osf): New function. Do OSF/1 style regnames. (print_insn_alpha_vms): New function. Do VMS style regnames. * disassemble.c (disassembler): Test bfd flavour to pick between OSF and VMS routines. Default to OSF. Thu Jul 18 17:19:34 1996 Ian Lance Taylor * configure.in: Call AC_SUBST (INSTALL_SHLIB). * configure: Rebuild. * Makefile.in (install): Use @INSTALL_SHLIB@. start-sanitize-d10v Wed Jul 17 14:39:05 1996 Martin M. Hunt * configure: (bfd_d10v_arch) Add new case. * configure.in: (bfd_d10v_arch) Add new case. * d10v-dis.c: New file. * d10v-opc.c: New file. * disassemble.c (disassembler) Add entry for d10v. end-sanitize-d10v Wed Jul 17 10:12:05 1996 J.T. Conklin * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab. Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com) * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to distinguish between variants of the instruction set. * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to distinguish between variants of the instruction set. Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com) * i386-dis.c (print_insn_i8086): New routine to disassemble using the 8086 instruction set. * i386-dis.c: General cleanups. Make most things static. Add prototypes. Get rid of static variables aflags and dflags. Pass them as args (to almost everything). Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com) * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns. * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l". * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two if the next arg is marked with SRC_IN_DST. Gross. * h8300-dis.c (bfd_h8_disassemble): Print "exr" when we're looking for and find EXR. * h8300-dis.c (bfd_h8_disassemble): We don't have a match if we're looking for KBIT and we don't find it. * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits for L_3 and L_2. * h8300-dis.c (bfd_h8_disassemble): Don't set plen for 3bit immediate operands. Tue Jul 9 10:55:20 1996 Ian Lance Taylor * Released binutils 2.7. * alpha-opc.c: Add new case of "mov". From Klaus Kaempf . Thu Jul 4 11:42:51 1996 Ian Lance Taylor * alpha-opc.c: Correct second case of "mov" to use OPRL. Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com) * sparc-dis.c (print_insn_sparclite): New routine to print sparclite instructions. Wed Jul 3 14:21:18 1996 J.T. Conklin * m68k-opc.c (m68k_opcodes): Add coldfire support. Fri Jun 28 15:53:51 1996 Doug Evans * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS, #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE. Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir): Use autoconf-set values. (docdir, oldincludedir): Removed. * configure.in (AC_PREREQ): autoconf 2.5 or higher. Fri Jun 21 13:53:36 1996 Richard Henderson * alpha-opc.c: New file. * alpha-opc.h: Remove. * alpha-dis.c: Complete rewrite to use new opcode table. * configure.in: For bfd_alpha_arch, use alpha-opc.o. * configure: Rebuild with autoconf 2.10. * Makefile.in (ALL_MACHINES): Add alpha-opc.o. (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not alpha-opc.h. (alpha-opc.o): New target. Wed Jun 19 15:55:12 1996 Ian Lance Taylor * sparc-dis.c (print_insn_sparc): Remove unused local variable i. Set imm_added_to_rs1 even if the source and destination register are not the same. * sparc-opc.c: Add some two operand forms of the wr instruction. Tue Jun 18 15:58:27 1996 Jeffrey A. Law * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument to just "mode". * disassemble.c (disassembler): Handle H8/S. * h8300-dis.c (print_insn_h8300s): New function for H8/S. Tue Jun 18 18:06:50 1996 Ian Lance Taylor * sparc-opc.c: Add beq/teq as aliases for be/te. * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko . Tue Jun 18 15:08:54 1996 Klaus Kaempf * makefile.vms: New file. * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov. Mon Jun 10 18:50:38 1996 Ian Lance Taylor * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8, regardless of plen. Tue Jun 4 09:15:53 1996 Doug Evans * i386-dis.c (OP_OFF): Call append_prefix. Thu May 23 15:18:23 1996 Michael Meissner * ppc-opc.c (instruction encoding macros): Add explicit casts to unsigned long to silence a warning from the Solaris PowerPC compiler. Thu Apr 25 19:33:32 1996 Doug Evans * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions. Mon Apr 22 17:12:35 1996 Doug Evans * sparc-dis.c (X_IMM,X_SIMM): New macros. (X_IMM13): Delete. (print_insn_sparc): Merge cases i,I,j together. New cases X,Y. * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants, Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt, cpush, cpusha, cpull sparclet insns. Wed Apr 17 14:20:22 1996 Doug Evans * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R. Thu Apr 11 17:30:02 1996 Ian Lance Taylor * sparc-opc.c: Set F_FBR on floating point branch instructions. Set F_FLOAT on other floating point instructions. Mon Apr 8 17:02:48 1996 Michael Meissner * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and registers. (powerpc_opcodes): Add 860/821 specific SPRs. Mon Apr 8 14:00:44 1996 Ian Lance Taylor * configure.in: Permit --enable-shared to specify a list of directories. Set and substitute BFD_PICLIST. * configure: Rebuild. * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all uses. Set to @BFD_PICLIST@. Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com) * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates, not "abs", which may be needed for the absolute in something like btst #0,@10:8. Print L_3 immediates separately from other immediates. Change ABSMOV reference to ABS8MEM. Wed Apr 3 10:40:45 1996 Doug Evans * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc. (current_arch_mask): New static global. (compute_arch_mask): New static function. (print_insn_sparc): Delete sparc_v9_p. New static local current_mach. Resort opcode table if current_mach changes. Generalize "insn not supported" test. (compare_opcodes): Prefer supported opcodes to nonsupported ones. Delete test for v9/!v9. * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK. (v6notlet): Define. (brfc): Split into CBR and FBR for coprocessor/fp branches. (brfcx): Renamed to FBRX. (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard coprocessor mnemonics are not supported on the sparclet). (condf): Renamed to CONDF. (SLCBCC2): Delete F_ALIAS flag. Sat Mar 30 21:45:59 1996 Doug Evans * sparc-opc.c (sparc_opcodes): rd must be 0 for mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX. Fri Mar 29 13:02:40 1996 Ian Lance Taylor * Makefile.in (config.status): Depend upon BFD VERSION file, so that the shared library version number is set correctly. Tue Mar 26 15:47:14 1996 Ian Lance Taylor * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From Miles Bader . * configure: Rebuild. Sat Mar 16 13:04:07 1996 Fred Fish * z8kgen.c (internal, gas): Call xmalloc rather than unchecked malloc. Tue Mar 12 12:14:10 1996 Ian Lance Taylor * configure: Rebuild with autoconf 2.8. Thu Mar 7 15:11:10 1996 Doug Evans * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'. * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'. Tue Mar 5 15:51:57 1996 Ian Lance Taylor * configure.in: Don't set SHLIB or SHLINK to an empty string, since they appear as targets in Makefile.in. * configure: Rebuild. Mon Feb 26 13:03:40 1996 Stan Shebs * mpw-make.sed: Edit out shared library support bits. Tue Feb 20 20:48:28 1996 Doug Evans * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET. (sparc_opcode_archs): Add MASK_V8 to sparclet entry. (sparc_opcodes): Add sparclet insns. (sparclet_cpreg_table): New static local. (sparc_{encode,decode}_sparclet_cpreg): New functions. * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs. Tue Feb 20 11:02:44 1996 Alan Modra * i386-dis.c (index16): New static variable. (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the other way around. (OP_indirE): Return result of OP_E. (OP_E): Check for 16 bit addressing mode, and disassemble correctly. Optimised 32 bit case a little. Don't print "(base,index,scale)" when sib specifies only an offset. Mon Feb 19 12:32:17 1996 Ian Lance Taylor * configure.in: Set and substitute SHLIB_DEP. * configure: Rebuild. * Makefile.in (SHLIB_DEP): New variable. (LIBIBERTY_LISTS, BFD_LIST): New variables. (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If COMMON_SHLIB, add them to piclist with appropriate modifications. ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB here: just use piclist. Mon Feb 19 02:03:50 1996 Doug Evans * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define. (print_insn_sparc): Rewrite v9/not-v9 tests. (compare_opcodes): Likewise. * sparc-opc.c (MASK_): Define. (v6,v7,v8,sparclite,v9,v9a): Redefine. (sparclet,v6notv9): Define. (sparc_opcode_archs): Delete member `conflicts'. Add `supported'. (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead. Thu Feb 15 14:45:05 1996 Ian Lance Taylor * configure.in: Call AC_PROG_CC before configure.host. * configure: Rebuild. * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB). Wed Feb 14 19:01:27 1996 Alan Modra * i386-dis.c (onebyte_has_modrm): New static array. (twobyte_has_modrm): New static array. (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed. Tue Feb 13 15:15:01 1996 Ian Lance Taylor * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not $(SHLINK). Mon Feb 12 16:26:06 1996 Michael Meissner * ppc-opc.c (PPC): Undef, so default defination on Windows NT doesn't conflict. Wed Feb 7 13:59:54 1996 Ian Lance Taylor * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on m68010up, not just m68020up | cpu32. * Makefile.in (SONAME): New variable. ($(SHLINK)): Make a link to the transformed name, as well. (stamp-tshlink): New target. (install): Skip stamp-tshlink during install. Tue Feb 6 12:28:54 1996 Ian Lance Taylor * configure.in: Call AC_ARG_PROGRAM. * configure: Rebuild. * Makefile.in (program_transform_name): New variable. (install): Transform library name before installing it. Mon Feb 5 16:14:42 1996 Ian Lance Taylor * i960-dis.c (mem): Add HX dcinva instruction. Support for building as a shared library, based on patches from Alan Modra : * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib. New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS, COMMON_SHLIB, SHLINK. * configure: Rebuild. * Makefile.in (ALLLIBS): New variable. (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables. (COMMON_SHLIB, SHLINK): New variables. (.c.o): If PICFLAG is set, compile twice, once PIC, once normal. (STAGESTUFF): Remove variable. (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB). (stamp-piclist, piclist): New targets. ($(SHLIB), $(SHLINK)): New targets. ($(OFILES)): Depend upon stamp-picdir. (disassemble.o): Build twice if PICFLAG is set. (MOSTLYCLEAN): Add pic/*.o. (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist. (distclean): Remove pic and stamp-picdir. (install): Install shared libraries. (stamp-picdir): New target. Fri Feb 2 17:15:25 1996 Doug Evans * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support. Print unknown instruction as "unknown", rather than in hex. Tue Jan 30 14:06:08 1996 Ian Lance Taylor * dis-buf.c: Include "sysdep.h" before "dis-asm.h". Thu Jan 25 20:24:07 1996 Doug Evans * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting. Thu Jan 25 11:56:49 1996 Ian Lance Taylor * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte when necessary. From Ulrich Drepper . Thu Jan 25 03:39:10 1996 Doug Evans * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with sparc_num_opcodes. Update architecture enum values. * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname. (sparc_opcode_lookup_arch): New function. (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes. (sparc_opcodes): Add v9a shutdown insn. Mon Jan 22 08:29:59 1996 Doug Evans * sparc-dis.c (print_insn_sparc): Renamed from print_insn. If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode architecture. (print_insn_sparc64): Deleted. * disassemble.c (disassembler, case bfd_arch_sparc): Always use print_insn_sparc. * sparc-opc.c (architecture_pname): Add v9a. Fri Jan 12 14:35:58 1996 David Mosberger-Tang * alpha-opc.h (alpha_insn_set): VAX floating point opcode was incorrectly defined as 0x16 when it should be 0x15. (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits! (alpha_insn_set): added cvtst and cvttq float ops. Also added excb (exception barrier) which is defined in the Alpha Architecture Handbook version 2. * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be disassembled as or, for example. Wed Jan 10 12:37:22 1996 Ian Lance Taylor * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex. (_print_insn_mips): Change i from int to unsigned int. Thu Jan 4 17:21:10 1996 David Edelsohn * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli. Thu Dec 28 13:29:19 1995 John Hassey * i386-dis.c: Added Pentium Pro instructions. Tue Dec 19 22:56:35 1995 Michael Meissner * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to being for Power2. Fri Dec 15 14:14:15 1995 J.T. Conklin * sh-opc.h (sh_nibble_type): Added REG_B. (sh_arg_type): Added A_REG_B. (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc and stc.l opcodes. * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B. Fri Dec 15 16:44:31 1995 Ian Lance Taylor * disassemble.c (disassembler): Use new bfd_big_endian macro. Tue Dec 12 12:22:24 1995 Ian Lance Taylor * Makefile.in (distclean): Remove stamp-h. From Ronald F. Guilmette . Tue Dec 5 13:42:44 1995 Stan Shebs From David Mosberger-Tang : * alpha-dis.c (print_insn_alpha): fixed decoding of cpys instruction. Mon Dec 4 12:29:05 1995 J.T. Conklin * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC. (sh_table): Added many SH3 opcodes. * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC. Fri Dec 1 07:42:18 1995 Michael Meissner * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC. (subco,subco.): Mark this PPC, not PPCCOM. Mon Nov 27 13:09:52 1995 Ian Lance Taylor * configure: Rebuild with autoconf 2.7. Tue Nov 21 18:28:06 1995 Ian Lance Taylor * configure: Rebuild with autoconf 2.6. Wed Nov 15 19:02:53 1995 Ken Raeburn * configure.in: Sort list of architectures. Accept but do nothing for alliant, convex, pyramid, romp, and tahoe. Wed Nov 8 20:18:59 1995 Ian Lance Taylor * a29k-dis.c (print_special): Change num to unsigned int. Wed Nov 8 20:10:35 1995 Eric Freudenthal * a29k-dis.c (print_insn): Cast insn24 to unsigned long when shifting it. Tue Nov 7 15:21:06 1995 Ian Lance Taylor * configure.in: Call AC_CHECK_PROG to find and cache AR. * configure: Rebuilt. Mon Nov 6 17:39:47 1995 Harry Dolan * configure.in: Add case for bfd_i860_arch. * configure: Rebuild. Fri Nov 3 12:45:31 1995 Ian Lance Taylor * m68k-opc.c (m68k_opcodes): Correct fmoveml operands. * m68k-dis.c (NEXTSINGLE): Change i to unsigned int. (NEXTDOUBLE): Likewise. (print_insn_m68k): Don't match fmoveml if there is more than one register in the list. (print_insn_arg): Handle a place of '8' for a type of 'L'. Thu Nov 2 23:06:33 1995 Ian Lance Taylor * m68k-opc.c: Use #W rather than #w. * m68k-dis.c (print_insn_arg): Handle new 'W' place. Wed Nov 1 13:30:24 1995 Ian Lance Taylor * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf, and likewise for all the dbxx opcodes. Mon Oct 30 20:50:40 1995 Fred Fish * arc-dis.c: Include elf-bfd.h rather than libelf.h. Mon Oct 23 11:11:34 1995 James G. Smith * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added the VR4100 specific instructions to the mips_opcodes structure. Thu Oct 19 11:05:23 1995 Stan Shebs * mpw-config.in, mpw-make.sed: Remove ugly workaround for ugly Metrowerks bug in CW6, is fixed in CW7. Mon Oct 16 12:59:01 1995 Michael Meissner * ppc-opc.c (whole file): Add flags for common/any support. Tue Oct 10 11:06:07 1995 Fred Fish * Makefile.in (BISON): Remove macro. (FLAGS_TO_PASS): Remove BISON. Fri Oct 6 16:26:45 1995 Ken Raeburn Mon Sep 25 22:49:32 1995 Andreas Schwab * m68k-dis.c (print_insn_m68k): Recognize all two-word instructions that take no args by looking at the match mask. (print_insn_arg): Always print "%" before register names. [case 'c']: Use "nc" for the no-cache case, as recognized by gas. [case '_']: Don't print "@#" before address. [case 'J']: Use "%s" as format string, not register name. [case 'B']: Treat place == 'C' like 'l' and 'L'. Thu Oct 5 22:16:20 1995 Ken Raeburn * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode name correctly. Tue Oct 3 08:30:20 1995 steve chamberlain From David Mosberger-Tang * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added. (alpha_insn_set): added definitions for VAX floating point instructions (Unix compilers don't generate these, but handcoded assembly might still use them). * alpha-dis.c (print_insn_alpha): added support for disassembling the miscellaneous instructions in the Alpha instruction set. Tue Sep 26 18:47:20 1995 Stan Shebs * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k, no longer create sysdep.h, sed ppc-opc.c to work around a serious Metrowerks C bug. * mpw-make.in: Remove. * mpw-make.sed: New file, used by mpw-configure to edit Makefile.in into an MPW makefile. Wed Sep 20 12:55:28 1995 Ian Lance Taylor * Makefile.in (maintainer-clean): New synonym for realclean. Tue Sep 19 15:28:36 1995 Ian Lance Taylor * m68k-opc.c: Split pmove patterns which use 'P' into patterns which use '0', '1', and '2' instead. Specify the proper size for a pmove immediate operand. Correct the pmovefd patterns to be moves to a register, not from a register. * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'. Thu Sep 14 11:58:22 1995 Doug Evans * sparc-opc.c (sparc_opcodes): Mark all insns that reference %psr, %wim, %tbr as F_NOTV9. Fri Sep 8 01:07:38 1995 Ian Lance Taylor * Makefile.in (Makefile): Just rebuild Makefile when running config.status. (config.h, stamp-h): New targets. * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when rebuilding config.h. * configure: Rebuild. * mips-opc.c: Change unaligned loads and stores with "t,A" operands to use "t,A(b)". Thu Sep 7 19:02:46 1995 Jim Wilson * sh-dis.c (print_insn_shx): Add F_FR0 support. Thu Sep 7 19:02:46 1995 Jim Wilson * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate until 3 instead of until 2. Wed Sep 6 21:21:33 1995 Ian Lance Taylor * Makefile.in (ALL_CFLAGS): Define. (.c.o, disassemble.o): Use $(ALL_CFLAGS). (MOSTLYCLEAN): Add config.log. (distclean): Don't remove config.log. * configure.in: Substitute HDEFINES. * configure: Rebuild. Wed Sep 6 15:08:09 1995 Jim Wilson * sh-opc.h (sh_arg_type): Add F_FR0. (sh_table, case fmac): Add F_FR0 as first argument. Wed Sep 6 15:08:09 1995 Jim Wilson * sh-opc.h (sh_opcode_info): Increase arg array size to 4. Tue Sep 5 18:28:10 1995 Doug Evans * sparc-dis.c: Remove all references to NO_V9. Tue Sep 5 20:03:26 1995 Ian Lance Taylor * aclocal.m4: Just include ../bfd/aclocal.m4. * configure: Rebuild. Tue Sep 5 16:09:59 1995 Doug Evans * sparc-dis.c (X_DISP19): Define. (print_insn, case 'G'): Use it. (print_insn, case 'L'): Sign extend displacement. Mon Sep 4 14:28:46 1995 Ian Lance Taylor * configure.in: Run ../bfd/configure.host before AC_PROG_CC. Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute host_makefile_frag or frags. * aclocal.m4: New file. * configure: Rebuild. * Makefile.in (INSTALL): Set to @INSTALL@. (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@. (INSTALL_DATA): Set to @INSTALL_DATA@. (AR): Set to @AR@. (AR_FLAGS): Set to rc rather than qc. (CC): Define as @CC@. (CFLAGS): Set to @CFLAGS@. (@host_makefile_frag@): Remove. (config.status): Remove dependency upon @frags@. * configure.in: ../bfd/config.bfd now just sets shell variables. Use them rather than looking through target Makefile fragments. * configure: Rebuild. Thu Aug 31 12:35:32 1995 Jim Wilson * sh-opc.h (ftrc): Change FPUL_N to FPUL_M. Wed Aug 30 13:52:28 1995 Doug Evans * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn. Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic sparc64 insns. * sparc-opc.c (sparc_opcodes): Fix prefetcha insn. (lookup_{name,value}): New functions. (prefetch_table): New static local. (sparc_{encode,decode}_prefetch): New functions. * sparc-dis.c (print_insn): Handle '*' arg (prefetch function). Wed Aug 30 11:11:58 1995 Jim Wilson * sh-opc.h: Add blank lines to improve readabililty of sh3e instructions. Wed Aug 30 11:09:38 1995 Jim Wilson * sh-dis.c: Correct comment on first line of file. Tue Aug 29 15:37:18 1995 Doug Evans * disassemble.c (disassembler): Handle bfd_mach_sparc64. * sparc-opc.c (asi, membar): New static locals. (sparc_{encode,decode}_{asi,membar}): New functions. (sparc_opcodes, membar insn): Fix. * sparc-dis.c (print_insn): Call sparc_decode_asi. Support decoding of membar masks. (X_MEMBAR): Define. Sat Aug 26 21:22:48 1995 Ian Lance Taylor * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl. Mon Aug 21 17:33:36 1995 Ian Lance Taylor * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis, and likewise for the other branches. Add bhs as an alias for bcc, and likewise for the size variants. Add dbhs as an alias for dbcc. Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu) * sh-opc.h (FP sts instructions): Update to match reality. Mon Aug 7 16:12:58 1995 Ian Lance Taylor * m68k-dis.c: (fpcr_names): Add % before all register names. (reg_names): Likewise. (print_insn_arg): Don't explicitly print % before register names. Add % before register names in static array names. In case 'r', print data registers as `@(Dn)', not `Dn@'. When printing a memory address, don't print @# before it. (print_indexed): Change base_disp and outer_disp from int to bfd_vma. Print using MIT syntax, not mutant invalid Motorola syntax. Sign extend 8 byte displacement correctly. (print_base): Print using MIT syntax. Print zpc when appropriate. Change parameter disp from int to bfd_vma. * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases for jsr. Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu) * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N, F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N. * sh-opc.h (sh_arg_type): Add new operand types. (sh_table): Add new opcodes from SH3E Floating Point ISA. Sat Aug 5 16:50:14 1995 Fred Fish * Makefile.in (distclean): Remove generated file config.h. Sat Aug 5 16:50:14 1995 Fred Fish * Makefile.in (distclean): Remove generated file config.h. Wed Aug 2 18:33:40 1995 Ian Lance Taylor * m68k-opc.c: New file, holding tables from include/opcode/m68k.h. Clean up tables. * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff. (opcode): Remove. (print_insn_m68k): Change d to be const. Use m68k_numopcodes rather than numopcodes. Use m68k_opcodes rather than removed opcode function. Don't check F_ALIAS. (print_insn_arg): Change first parameter to be const char *. * Makefile.in (ALL_MACHINES): Add m68k-opc.o. (m68k-opc.o): New target. * configure.in: Build m68k-opc.o for bfd_m68k_arch. * configure: Rebuild. Wed Aug 2 08:23:38 1995 Doug Evans * sparc-dis.c (HASH_SIZE, HASH_INSN): Define. (opcode_bits, opcode_hash_table): New variables. (opcodes_initialized): Renamed from opcodes_sorted. (build_hash_table): New function. (is_delayed_branch): Use hash table. (print_insn): Renamed from print_insn_sparc, made static. Build and use hash table. If !sparc64, ignore sparc64 insns, and vice-versa if sparc64. (print_insn_sparc, print_insn_sparc64): New functions. (compare_opcodes): Move sparc64 opcodes to end. Print commutative insns with constant second. * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS. Tue Aug 1 00:12:49 1995 Ian Lance Taylor * sh-dis.c (print_insn_shx): Remove unused local dslot. Use print_address_func for A_BDISP12 and A_BDISP8. Correct test which avoids printing a delay slot in a delay slot. * sh-opc.h (sh_table): Fully bracket last entry. Mon Jul 31 12:04:47 1995 Doug Evans * sparc-opc.c (sllx, srax, srlx): Fix disassembly. Wed Jul 12 00:59:34 1995 Ken Raeburn * configure.in: Get host_makefile_frag from ${srcdir}. * configure.in: Autoconfiscated. Check for string[s].h. Create config.h from config.in. Don't set up sysdep.h link. * sysdep.h: New file. * configure, config.in: New files, generated from configure.in. * Makefile.in: Updated to be processed autoconf-style. (distclean): Keep sysdep.h. Remove config.log and config.cache. (Makefile): Depend on config.status. (config.status): New rule. * configure.bat: Update Makefile substitutions. Tue Jul 11 14:23:37 1995 Jeff Spiegel * mips-opc.c (L1): Define. (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid, addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti, and wb. Tue Jul 11 11:49:49 1995 Ian Lance Taylor * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu if ISA 3 and addu otherwise, replacing or, since some MIPS chips have multiple add units but only a single logical unit. * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3, shifted by 18, without any insertion or extraction function. (insert_cr, extract_cr): Remove. start-sanitize-arc Mon Jul 3 11:54:31 1995 Ian Lance Taylor * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o. end-sanitize-arc Wed Jun 21 20:05:39 1995 Ken Raeburn * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before register names. Thu Jun 15 17:23:31 1995 Stan Shebs * mpw-config.in: Add sh and i386 configs, remove sparc config. * sh-opc.h: Add copyright. Mon Jun 5 03:30:43 1995 Ken Raeburn * Makefile.in (crunch-m68k): Delete extra target accidentally checked in a while ago. Wed May 24 16:22:13 1995 Jim Wilson * sh-opc.h (sh_table): Add SH3 support. Wed May 24 14:16:08 1995 Steve Chamberlain * sh-opc.h: Added bsrf and braf. Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk) * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete bogus [ls]fm{ea,fd} patterns. * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc. * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and initialize it from memory. Make function static. (print_insn_{big,little}_arm): New functions. * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for the correct endianness. start-sanitize-arc Sat Apr 29 23:20:05 1995 Doug Evans * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag. (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}. end-sanitize-arc Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com> * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from enum list. Wed Apr 19 14:07:03 1995 Michael Meissner * m68k-dis.c (opcode): Finish change made by Kung Hsu on April 17th, so that it builds again using GCC as the compiler. Tue Apr 18 12:14:51 1995 Ken Raeburn * mips-dis.c (print_insn_little_mips): Cast return value from bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips expects an unsigned long, and that might be fewer words of argument storage (e.g., if bfd_vma is long long on a 32-bit machine). (print_insn_big_mips): Likewise with bfd_getb32 value. (_print_insn_mips): Now static. Mon Apr 17 12:23:28 1995 Kung Hsu * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because gcc memory hog problem with initializer is fixed. start-sanitize-arc Wed Apr 12 09:04:12 1995 Doug Evans * arc-opc.c (NULL): Define. (arc_operands, insn fields u,s): Delete. (arc_operands, insn fields a,b,c): Mark as signed. (arc_opcodes): No longer const, links computed at run-time. (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle suffixes that affect the insn code. (arc_opcodes): Resort table to macros are first. (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms. (arc_opcodes, st [b] entry): Likewise. (arc_opcodes, st [b,d] entry): Fix mask, value. (arc_reg_names): Add entries for r29, r30, r31, r60. (opcode_map, icode_map): New static globals. (arc_opcode_init_tables): Initialize them. (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions. (insert_shimmoffset): Signal error if register present. Validate constant. * arc-dis.c (print_insn): Call arc_opcode_lookup_dis. end-sanitize-arc Mon Apr 10 15:55:01 1995 Stan Shebs Merge in support for Mac MPW as a host. (Old change descriptions retained for informational value.) * mpw-config.in (archname): Compute from the config. (BFD_MACHINES, ARCHDEFS): Put into mk.tmp. * mpw-config.in (target_arch): Compute from canonical target. (m68k, mips, powerpc, sparc): Add architectures. * mpw-make.in (disassemble.c.o): Add. (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far). * mpw-config.in (BFD_MACHINES): Set to a default value. * mpw-make.in (BFD_MACHINES): Remove wired-in value. * mpw-make.in (CSEARCH): Add extra-include to search path. * mpw-config.in (varargs.h): Don't create. (sysdep.h): Create using forward-include. * mpw-make.in (CSEARCH): Add include/mpw to search path. * mpw-config.in: New file, MPW version of configure.in. * mpw-make.in: New file, MPW version of Makefile.in. start-sanitize-arc Thu Apr 6 20:36:08 1995 Doug Evans * arc-dis.c (print_insn): New parameter `big_p'. Callers updated. Call arc_get_opcode_mach to map bfd mach number to opcode value. (print_insn_*): Pass bfd mach number, not opcode version. * arc-opc.c (arc_get_opcode_mach): New function. end-sanitize-arc Fri Mar 31 14:23:38 1995 Ken Raeburn * alpha-dis.c (print_insn_alpha): Put empty statement after default label. Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu) * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version. (low_sign_extend): Likewise. (get_field): Delete unused function. (set_field, deposit_14, deposit_21): Likewise. Fri Mar 17 15:55:53 1995 J.T. Conklin * i386-dis.c: Support for more pentium opcodes. From Guy Harris (guy@netapp.com). Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com) Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de) * alpha-opc.h (OSF_ASMCODE): define print pal-code names as defined in App C of the Alpha Architecture Reference Manual * alpha-dis.c: cleaned up output print stylized code forms as defined in App A.4.3 of the Alpha Architecture Reference Manual Wed Mar 8 15:21:14 1995 Ian Lance Taylor * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for `rfe'. * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R', 'N', and 'M'. Wed Mar 8 02:54:05 1995 Ken Raeburn * m68k-dis.c (opcode): New function. Returns address of opcode table entry given index, even if the opcode table was split to work around gcc bugs. (print_insn_m68k): Call opcode instead of referencing m68k_opcodes directly. (BREAK_UP_BIG_DECL): Make secondary array static and const. (reg_names): Now const. (print_insn_arg): Arrays cacheFieldName and names now const. (print_indexed): Array scales now const. start-sanitize-arc Tue Mar 7 21:14:14 1995 Doug Evans * arc-dis.c (print_insn_arc_base): Split into big and little fns. (print_insn_arc_{host,graphics,audio}): Likewise. (print_insn): Add prototype. (arc_get_disassembler): New arg `big_p'. Return little or big print fn accordingly. * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once. (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order. (arc_opval_supported): Likewise. * disassemble.c (disassembler): Pass big endian flag to arc_get_disassembler. end-sanitize-arc Tue Mar 7 16:41:21 1995 Ian Lance Taylor * ppc-opc.c: Sort recently added instructions by minor opcode number within major opcode number. Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu) * hppa-dis.c: Include libhppa.h. Fri Feb 24 19:15:36 1995 Ian Lance Taylor * mips-opc.c: Change dli to use M_DLI, and add dla. Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * Makefile.in (ALL_MACHINES): Add w65-dis.o. start-sanitize-arc Fri Feb 17 12:42:25 1995 Doug Evans * arc-dis.c (arc_get_disassembler): Change argument to int, one of bfd_mach_arc_xxx. All callers updated. end-sanitize-arc Thu Feb 16 17:34:41 1995 Ian Lance Taylor * mips-opc.c: Add r4650 mul instruction. Wed Feb 15 15:45:20 1995 Ian Lance Taylor * mips-opc.c: Add uld and usd macros for unaligned double load and store. Tue Feb 14 13:17:37 1995 Michael Meissner * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci, mfdcr, mtdcr, icbt, iccci. start-sanitize-arc Mon Feb 13 11:09:17 1995 Doug Evans * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS. * arc-opc.c (arc_operands): New operand 'J' for jump addresses. ('L' operand): Mark as ARC_OPERAND_ADDRESS. (arc_opcodes, j insn): Use 'J' operand type, not 'L'. (arc_opcodes, ld/st insns): Fix address writeback operand letter. (insert_absaddr): New function. Thu Feb 9 19:19:23 1995 Doug Evans * arc-dis.c (print_insn_arc): Rename to print_insn and make static. New argument `cpu', pass it to arc_opcode_init_tables. Document byte order dependencies. Ignore unsupported insns. (arc_get_disassembler): New function. (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics, print_insn_arc_audio): New functions. * arc-opc.c (MULTSHIFT operand): Delete. (UNSIGNED, SATURATION): New operands. (mac, mul, mul64, mulu64): New insns. (ext. asl, asr, lsr, ror): Only available on host and graphics cpus. (padc, padd, pmov, pand, psbc, psub, swap): New insns. (host,graphics,audio extended and auxiliary regs): Define. (ss, sc, mh, ml): New suffixes. (arc_opcode_supported, arc_opval_supported): New functions. (insert_multshift, extract_multshift): Deleted. * disassemble.c (disassembler, case bfd_arch_arc): Call arc_get_disassembler to get disassembler routine. end-sanitize-arc Thu Feb 9 12:28:13 1995 Stan Shebs * i960-dis.c (struct tabent, struct sparse_tabent): Change the signed char fields to shorts, more portable. Wed Feb 8 17:29:29 1995 Stan Shebs * i960-dis.c (struct tabent, struct sparse_tabent): Declare the char fields as signed chars, since they may have negative values. Mon Feb 6 10:52:06 1995 J.T. Conklin * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum (mycroft@netbsd.org). Mon Jan 30 12:38:00 1995 Ian Lance Taylor From "Logg, Ed" : * ppc-opc.c (extract_bdm): Correct parenthezisation. * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized value. Thu Jan 26 18:32:08 1995 Ian Lance Taylor * ppc-opc.c: Changes based on patch from David Edelsohn . (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of SPR. (FXM_MASK): Define. (insert_tbr): New static function. (extract_tbr): New static function. (XFXFXM_MASK, XFXM): Define. (XSPRBAT_MASK, XSPRG_MASK): Define. (powerpc_opcodes): Add instructions to access special registers by name. Add mtcr and mftbu. Tue Jan 17 10:56:43 1995 Ian Lance Taylor * mips-opc.c (P3): Define. (mips_opcodes): Add mad and madu. Sun Jan 15 16:32:59 1995 Steve Chamberlain * configure.in: Add W65 support. * disassemble.c: Likewise. * w65-opc.h, w65-dis.c: New files. Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com) * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit immediates. start-sanitize-arc Tue Dec 20 10:36:55 1994 Doug Evans * arc-dis.c (print_insn_arc): Branch offsets are relative to delay slot. * arc-opc.c (extract_reladdr): New function. (insert_reladdr): Store address right-shifted by 2. end-sanitize-arc Tue Dec 20 11:25:12 1994 Ian Lance Taylor * mips-opc.c: Add dli as a synonym for li. start-sanitize-arc Mon Dec 19 12:35:51 1994 Doug Evans * arc-opc.c (insertion fns): Pass pointer to value's table entry. All uses changed. (extraction fns): Insn argument now array of two words. Return pointer to value's table entry. All uses changed. (arc_opcode_lookup_suffix): Exported for arc-dis.c. (insert_multshift, extract_multshift): New fns. (arc_operands): Add support for cache bypass suffix. Add support for predefined aux regs. Modifier bits moved to flags field. (arc_opcodes): Likewise. Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed. New insn rlc. Update to syntax in programmer's manual. (arc_reg_names): Fix typo in lp_count. Add predefined aux regs. (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache bypass. (arc_opcode_init_tables): New argument to indicate cpu type. (insert_reg): Handle predefined aux regs. (extract_reg): Likewise. (lookup_register): New fn. * arc-dis.c (arc_condition_codes): Deleted. (print_insn_arc): Handle insns with 32 bit immediate constants better. Clean up modifier handling. Handle predefined aux regs. end-sanitize-arc Thu Dec 8 18:23:31 1994 Ken Raeburn * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and print something for reserved opcode values, even if it won't assemble again. * mips-dis.c (_print_insn_mips): When initializing, shift right and mask, to avoid sign extension problems on the Alpha. * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr control registers. start-sanitize-arc Tue Nov 29 18:02:43 1994 Doug Evans * configure.in: Add ARC support. * disassemble.c: Likewise. * arc-dis.c, arc-opc.c: New files. end-sanitize-arc Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com) * sh-opc.h (mov.l gbr): Get direction right. * sh-dis.c (print_insn_shx): New function. (print_insn_shl, print_insn_sh): Call print_insn_shx to print opcodes with right byte order. Thu Nov 3 19:32:22 1994 Ken Raeburn * ns32k-dis.c (struct ns32k_option): Renamed from struct option, to avoid conflicts with getopt. Mon Oct 31 18:48:10 1994 Ian Lance Taylor * hppa-dis.c (print_insn_hppa): Read the instruction using bfd_getb32, so that it works on a little endian or 64 bit host. Remove unused local variable op. Tue Oct 25 17:07:57 1994 Ian Lance Taylor * mips-opc.c: Use or instead of addu for pseudo-op move, since addu does not work correctly if -mips3. Wed Oct 19 13:40:16 1994 Ian Lance Taylor * a29k-dis.c (print_special): Add special register names defined on 29030, 29040 and 29050. (print_insn): Handle new operand type 'I'. Wed Oct 12 11:59:55 1994 Ian Lance Taylor * Makefile.in (INSTALL): Use top level install.sh script. Wed Oct 5 19:16:29 1994 Ian Lance Taylor * sparc-dis.c: Rewrite to use bitfields, rather than a union, so that it works on a little endian host. Tue Oct 4 12:14:21 1994 Ian Lance Taylor * configure.in: Use ${config_shell} when running config.bfd. Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3. Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * a29k-dis.c (print_insn): Print the opcode. Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * mips-opc.c (mips_opcodes): Set WR_t for sc and scd. Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu) * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3. Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions which store a value into memory. Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org) * configure.in, Makefile.in, disassemble.c: Add support for the ARM. * arm-dis.c, arm-opc.h: New files. Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com) * Makefile.in (ns32k-dis.o): Add dependency. * ns32k-dis.c (print_insn_arg): Declare initialized local as string, not as array of chars. Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'. * sparc-opc.c: Added sparclite extended FP operations, and versions of v9 impdep* instructions permitting specification of the OPF field. Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * i960-dis.c (reg_names): Now const. (struct sparse_tabent): New type, copied from array type in mem function. (ctrl): Local static array ctrl_tab now const. (cobr): Local static array cobr_tab now const. (mem): Local variables reg1, reg2, reg3 now point to const. Local static variable mem_tab no longer explicitly initialized. Changed mem_init to const array of struct sparse_tabent. (reg): Local static variable reg_tab no longer explicitly initialized. Changed reg_init to const array of struct sparse_tabent. (ea): Local static array scale_tab now const. * i960-dis.c (reg): Added i960JX instructions to reg_init table. (REG_MAX): Updated. Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com) * configure.bat: the disassember needs to be enabled for "objdump -d" to work in djgpp. Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * ns32k-dis.c: Deleted all code in "#ifdef GDB". (invalid_float): Enabled general version, doesn't require running on ns32k host. Changed to take char* argument, and test for explicitly specified sizes, instead of using sizeof() on host CPU types. (INVALID_FLOAT): Cast first argument. (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532, list_P032, list_M032): Now const. (optlist, list_search): Made appropriate arguments now point to const. (print_insn_arg): Changed static array of one-character-string pointers into a static const array of characters; fixed sprintf statement accordingly. Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au) * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped from distribution. A ns32k-dis.c from a previous distribution has been brought up to date and supports the new interface. * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k. * configure.in: add bfd_ns32k_arch target support. * Makefile.in: add ns32k-dis.o to ALL_MACHINES. Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o. Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com) * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch disassembly right. Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com) * h8300-dis.c, mips-dis.c: Don't use true and false. Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com) * configure.in: Change --with-targets to --enable-targets. Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * mips-dis.c (_print_insn_mips): Build a static hash table mapping opcodes to the first instruction with that opcode, to speed disassembly of large files. From ralphc@pyramid.com (Ralph Campbell). Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * Makefile.in (mostlyclean): Fix typo (was mostyclean). Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com) * configure.bat: update to latest makefile.in Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com) * a29k-dis.c (print_insn): Print 'x' type operand in hex. * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly. * sh-dis.c (print_insn_sh): Don't recur endlessly if delay slot insn is in a delay slot. * z8k-opc.h: (resflg): Fix patterns. * h8500-opc.h Fix CR insn patterns. Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and "cmpl" before POWER versions, so that gas -many uses them. Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * disassemble.c: New file. * Makefile.in (OFILES): Add disassemble.o. (disassemble.o): Provide dependencies; compile with $(ARCHDEFS). * configure.in: Define ARCHDEFS in Makefile. Code taken from binutils/configure.in. * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the opcode being examined. Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS. (insert_ral, insert_ram, insert_ras): New functions. (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and RAS for store with update. Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn (edelsohn@npac.syr.edu). Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips-opc.c (mips_opcodes): Correct operands of "nor" with an immediate argument. Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com) * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0". Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * ppc-opc.c (powerpc_operands): The signedp field has been removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag instead. Add new operand SISIGNOPT. (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT. Based on patch from David Edelsohn (edelsohn@npac.syr.edu). * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather than signedp field. Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * i386-dis.c (struct private): Renamed to dis_private. `private' is a reserved word for dynix cc. Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * configure.in: Change error message to refer to bfd/config.bfd rather than bfd/configure.in. Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu) * ppc-opc.c: Define POWER2 as short alias flag. (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and fsqrt. Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * i960-dis.c (print_insn_i960): Don't read a second word for opcodes 0, 1, 2 and 3. Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * configure.in: Don't build m68881-ext.o for bfd_m68k_arch. Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * m68881-ext.c: Removed; no longer used. * Makefile.in: Changed accordingly. * m68k-dis.c (ext_format_68881): Don't declare. (print_insn_m68k): If an instruction uses place 'i', it uses at least four fixed bytes. (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For extended float, convert to double using floatformat_to_double, not ieee_extended_to_double, and fetch the data before converting it. Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips-opc.c: It's sqrt.s, not sqrt.w. From davidj@ICSI.Berkeley.EDU (David Johnson). Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the PowerPC uses bdnz[l][a]. Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * dis-buf.c, i386-dis.c: Include sysdep.h. Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o. * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported by Motorola PowerPC 601 with PPC_OPCODE_601. * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Disassemble Motorola PowerPC 601 instructions as well as normal PowerPC instructions. Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * i960-dis.c (reg, mem): Just use a static array instead of calling xmalloc. Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the condition name index if this is for a negated condition. * hppa-dis.c (print_insn_hppa): No space before 'H' operand. Floating point format for 'H' operand is backwards from normal case (0 == double, 1 == single). For '4', '6', '7', '9', and '8' operands (fmpyadd and fmpysub), handle bizarre register translation correctly for single precision format. * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F' or 'I' operands if the next format specifier is 'M' (fcmp condition completer). Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * ppc-opc.c (powerpc_operands): New operand type MBE to handle a single number giving a bitmask for the MB and ME fields of an M form instruction. Change NB to accept 32, and turn it into 0; also turn 0 into 32 when disassembling. Seperated SH from NB. (insert_mbe, extract_mbe): New functions. (insert_nb, extract_nb): New functions. (SC_MASK): Mask out SA and LK bits. (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT, RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark "bctr" and "bctrl" as accepted by POWER. Change "rlwimi", "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.", "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions. (powerpc_macros): Define table of macro definitions. (powerpc_num_macros): Define. * ppc-dis.c (print_insn_powerpc): Don't skip optional operands if PPC_OPERAND_NEXT is set. Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of char. Retrieve contents using bfd_getl32 instead of shifting. Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * ppc-opc.c: New file. Opcode table for PowerPC, including opcodes for POWER (RS/6000). * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler. * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o. (CFILES): Add ppc-dis.c. (ppc-dis.o, ppc-opc.o): New targets. * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch. Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template. No space before 'u', 'f', or 'N'. Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading farther than we should. * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS. Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com) * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments. Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com) * i960-dis.c (print_insn_i960): Only read word2 if the instruction needs it, to prevent reading past the end of a section. Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips-opc.h: Use macro for j instruction, to support SVR4 PIC. Removed t,A case for la; always use t,A(b) case. Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) From Ted Lemen * mips-dis.c (print_insn_arg): Handle 'k'. * mips-opc.c: Make cache use k, not t. Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct FLOAT_FORMAT_CODE to put out floating point register names. Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips-opc.c: Use macros for jal variants, to support SVR4 PIC. Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x. Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts larger than 32. Moved dsxx32 variants first for disassembler. Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com) * z8kgen.c, z8k-opc.h: Add full lda information. Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu) * hppa-dis.c (print_insn_hppa): Do not emit a space after movb instructions. Any necessary space will be emitted by the code to handle nullification completers. Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips-opc.c: Moved l.d down so that it disassembles as ldc1. Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * alpha-opc.h: Add ldl_l, fix typo for ldq_u. * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE. Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips-opc.c: Correct lwu opcode value (book had it wrong). Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com) * z8k-dis.c (FETCH_DATA): get just the right amount of data. (unpack_instr): Cope with ARG_IMM4M1 type instructions. Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com) * m88k-dis.c (m88kdis): comment change. Remove space after printing mnemonic. (printop): handle new arg types DEC and XREG for m88110. Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu) * hppa-dis.c (print_insn_hppa): Handle 'z' operand type for absolute branch addresses. Delete special "ble" and "be" code in 'W' operand code. Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips-opc.c: Set hazard information correctly for branch likely instructions. Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use info->fprintf_func for printing and info->print_address_func for address output. Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips-opc.c: Set INSN_TRAP for tXX instructions. Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Corrected second case of "b" for disassembler. Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls to BFD swapping routines to correspond to BFD name changes. Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips-opc.c: Change div machine instruction to be z,s,t rather than s,t. Change div macro to be d,v,t rather than d,s,t. Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu, rem and remu which generates only the corresponding div instruction. This is for compatibility with the MIPS assembler, which only generates the simple machine instruction when an explicit destination of $0 is used. * mips-dis.c (print_insn_arg): Handle 'z' (always register zero). Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set WR_31 hazard for bal, bgezal, bltzal. Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * hppa-dis.c (print_insn_hppa): Use print function from within the disassemble_info, not fprintf_filtered. Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff Law, law@cs.utah.edu.) Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips-opc.c ("absu"): Removed. ("dabs"): Added. Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips-opc.c: Added r6000 and r4000 instructions and macros. Changed hazard information to distinguish between memory load delays and coprocessor load delays. Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s. Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com) * configure.in: Don't pass cpu to config.bfd. Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * m88k-dis.c (m88kdis): Make class unsigned. Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com) * alpha-dis.c (print_insn_alpha): One branch format case was missing the instruction name. Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com) * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS. Add the arch-specific auxiliary files. (OFILES): Remove the arch-specific auxiliary files and use BFD_MACHINES instead of DIS_LIBS. * configure.in: Set BFD_MACHINES based on --with-targets option. Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly for swc1. Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * sparc-opc.c: Change CONST to const to deal with gcc -Dconst=__const -traditional. Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took coprocessor instructions out of #if 0, and made them use new argument type "C". Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h. Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com) * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch instruction, for use by the disassembler. * sparc-dis.c (SEX): Add sign extension macro. Replace many hand-coded sign extensions that depended on 32-bit host ints. FIXME, we still depend on big-endian host bitfield ordering. (sparc_print_insn): Set the insn_info_valid field, and the other fields that describe the instruction being printed. Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com) * sparc-opc.c (call): Accept all 6 addressing modes valid for `jmp' instead of just one of them. Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com) * hppa-dis.c: Move floating registers from reg_names to fp_reg_names. (fput_fp_reg_r): Renamed from fput_reg_r. (fput_fp_reg): New function. (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate. * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards. * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD. Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com) * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'. * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n', don't output a space. * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad. Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com) * mips-opc.c: New file, containing opcode table from ../include/opcode/mips.h. * Makefile.in: Add it. Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * m88k-dis.c: New file, moved in from gdb and changed to use the new dis-asm.h disassembler interface. * Makefile.in (DIS_LIBS): Added m88k-dis.o. (m88k-dis.o): New target. Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com) * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to argument string const char * to correspond to opcode/mips.h. Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com) * mips-dis.c: Updated to account for name changes in new version of opcode/mips.h. * Makefile.in: Added header file dependencies. Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com) * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction. Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign extend, rather than shifts. Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com) * Makefile.in: Undo 15 June change. Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com) * m68k-dis.c (print_insn_arg): Change return value to byte count or error code. * m68k-dis.c: Re-write to detect invalid operands before printing anything, so we can handle this the same way we handle invalid opcodes. Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com) * sh-dis.c, sh-opc.h: Understand some more opcodes. Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com) * hppa-dis.c: Include and sysdep.h before other header files. Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) * sparc-dis.c: Don't declare qsort, since sysdep.h might. * configure.in: Do make sysdep.h link. * Makefile.in: Search ../include. Don't search ../bfd. Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com) Changes from Jeff Law, law@cs.utah.edu: * hppa-dis.c: Fix typo. 'a' and 'd' were reversed. Do not print a space before the completers specified by 'a' and 'd'. Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com) * mips-dis.c: No longer need to bomb out if HOST_64_BIT is defined, since gdb has been fixed. Changes from Jeff Law, law@cs.utah.edu: * hppa-dis.c (print_insn_hppa): Last argument to fput_reg, fput_reg_r, fput_creg, fput_const, and fputs_filtered should be a *disassemble_info, not a *FILE. * hppa-dis.c: Support 'd', '!', and 'a'. * hppa-dis.c: Support 's' to extract a 2 bit space register. * hppa-dis.c: Delete cases which are no longer needed. Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com) * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes. Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com) * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with H8/300-H opcodes. Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com) * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h. * configure.in: No longer need to configure to get sysdep.h. Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com) * Patches from Jeffrey Law . * hppa-dis.c: Support 'I', 'J', and 'K' in output templates for 1.1 FP computational instructions. Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) * h8500-dis.c (print_insn_h8500): Address argument is type bfd_vma. * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002): Ditto. * h8500-opc.h (addr_class_type): No comma at end of enumerator. * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto. * sparc-dis.c (compare_opcodes): Move static declaration to top-level. Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp instruction, remove unimp hack from 'l' argument. Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com) * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's happy. Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com) * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson): * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor instructions. Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some arrays of string pointers to 2-d arrays of chars, to save space. Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com) * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c: Cast second arg to read_memory_func to "bfd_byte *", as necessary. Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) * hppa-dis.c: New file from Utah, adapted to new disassembler calling interface. * Makefile.in: Include it. Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com) * sh-dis.c, sh-opc.h: New files. Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com) * alpha-dis.c, alpha-opc.h: New files. Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed value. Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com) * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias. Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com) * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than const. Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com) * sparc-dis.c: Use fprintf_func a few places where I forgot, and double percent signs a few places. * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils. * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c: Use info->print_address_func not print_address. * dis-buf.c (generic_print_address): New function. Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * Makefile.in: Add sparc-dis.c. sparc-dis.c: New file, merges binutils and gdb versions as follows: From GDB: Add `add' instruction to the set that get checked for a preceding `sethi' in order to print an absolute address. * (print_insn): Disassembly prefers real instructions. (is_delayed_branch): Speed up. * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables. Still missing some float ops, and needs testing. * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by F_ALIAS. Use printf, not fprintf, when not passing a file pointer... (compare_opcodes): Check that identical instructions have identical opcodes, complain otherwise. From binutils: * New 'm' arg. * Include reg_names. From neither: Use dis-asm.h/read_memory_func interface. Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com) * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data): deliberately return non-zero to setjmp from longjmp. Otherwise this code fails to compile. Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com) * m68k-dis.c: Fix prototype for fetch_arg(). Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * dis-buf.c: New file, for new read_memory_func interface. Makefile.in (OFILES): Include it. m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c: Use new read_memory_func interface. Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com) * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right. * h8500-opc.h: Fix couple of opcodes. Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com) * Makefile.in: add dvi & installcheck targets Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com) * Makefile.in: Update for h8500-dis.c. Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com) * h8500-dis.c, h8500-opc.h: New files Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com) * mips-dis.c, z8k-dis.c: Converted to use interface defined in ../include/dis-asm.h. * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c and ../gdb/m68k-pinsn.c). * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c and ../gdb/i386-pinsn.c). * m68881-ext.c: New file. Moved definition of ext_format ext_format_68881 from ../gdb/m68k-tdep.c. * Makefile.in: Adjust for new files. * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com). * m68k-dis.c: Recognize '9' placement code, so (say) pflush can be dis-assembled. Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) * mips-dis.c (print_insn_arg): Now returns void. Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com) * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h files that use the macros. Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips-dis.c: New file, from gdb/mips-pinsn.c. * Makefile.in (DIS_LIBS): Added mips-dis.o. (CFILES): Added mips-dis.c. Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com) * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines * z8kgen.c, z8k-opc.h: fix sizes of some shifts. Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com) * Makefile.in: Improve *clean rules. * configure.in: Allow a default host. Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com) * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep files include other sysdep files Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com) * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com) * configure.in: For host support, use ../bfd/configure.host so it stays in sync with the ../bfd/hosts database. Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com) * configure.in: use cpu-vendor-os triple instead of nested cases Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com) * z8k-dis.c (unparse_instr): fix bug where opcode returned was *always* the wrong one. Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com) * z8kgen.c: added copyright info Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com) * z8k-dis.c (unparse_instr): prettier tabs * z8kgen.c -> z8k-opc.h: bug fixes in tables Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com) * configure.in: Add ncr* configuration. * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make picayune ANSI compilers happy. Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com) * configure.in (i386): Make i386 and i486 synonymous for now. * configure.in (i[34]86-*-sysv4): Add my_host definition. Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com) * Makefile.in (install): Fix typo. Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com) * Makefile.in (make): Remove obsolete crud. (sparc-opc.o): Avoid Sun Make VPATH bug. Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com) * Makefile.in: since there are no SUBDIRS, remove rule and references of subdir_do. Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com) * Makefile.in (install): Get the library name right here too. Don't install bfd.h, since it's unrelated to this library. No subdirs to recurse into, either. (CFILES): The source file has a .c suffix, not .o. * sparc-opc.c: New file, moved from BFD. * Makefile.in (OFILES): Build it. Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com) * z8k-dis.c: fixed forward refferences of some declarations. Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com) * Makefile.in: get the name of the library right Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com) * z8k-dis.c: knows how to disassemble z8k stuff * z8k-opc.h: new file full of z8000 opcodes Local Variables: version-control: never End: