/* tc-dvp.c -- Assembler for the DVP Copyright (C) 1997, 1998 Free Software Foundation. This file is part of GAS, the GNU Assembler. GAS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GAS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GAS; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include #include #include "as.h" #include "subsegs.h" /* Needed by opcode/dvp.h. */ #include "dis-asm.h" #include "opcode/dvp.h" #include "elf/mips.h" #ifdef USE_STDARG #include #else #include #endif /* Value of VIF `nop' instruction. */ #define VIFNOP 0 #define MIN(a,b) ((a) < (b) ? (a) : (b)) /* Compute DMA operand index number of OP. */ #define DMA_OPERAND_INDEX(op) ((op) - dma_operands) /* Our local label prefix. */ #define LOCAL_LABEL_PREFIX ".L" /* Label prefix for end markers used in autocounts. */ #define END_LABEL_PREFIX ".L.end." /* Label to use for unique labels. */ #define UNIQUE_LABEL_PREFIX ".L.dvptmp." /* Prefix for mips version of labels defined in vu code. Note that symbols that begin with '$' are local symbols on mips targets, so we can't begin it with '$'. */ #define VU_LABEL_PREFIX "_$" /* Prefix for symbols at start of vu overlays, in r5900 space. */ #define VUOVERLAY_START_PREFIX "__start_" static long parse_float PARAMS ((char **, const char **)); static symbolS * create_label PARAMS ((const char *, const char *)); static symbolS * create_colon_label PARAMS ((int, const char *, const char *)); static char * unique_name PARAMS ((const char *)); static char * vuoverlay_section_name PARAMS ((symbolS *)); static void create_vuoverlay_section PARAMS ((const char *, symbolS *, symbolS *, symbolS *)); static symbolS * compute_mpgloc PARAMS ((symbolS *, symbolS *, symbolS *)); static int compute_nloop PARAMS ((gif_type, int, int)); static void check_nloop PARAMS ((gif_type, int, int, int, char *, unsigned int)); static long eval_expr PARAMS ((dvp_cpu, int, int, const char *, ...)); static long parse_dma_addr_autocount (); static void inline_dma_data PARAMS ((int, DVP_INSN *)); static void setup_dma_autocount PARAMS ((const char *, DVP_INSN *, int)); static void insert_operand PARAMS ((dvp_cpu, const dvp_opcode *, const dvp_operand *, int, DVP_INSN *, offsetT, const char **)); static void insert_operand_final PARAMS ((dvp_cpu, const dvp_operand *, int, DVP_INSN *, offsetT, char *, unsigned int)); static void insert_mpg_marker PARAMS ((unsigned long)); static void insert_unpack_marker PARAMS ((unsigned long)); static int insert_file PARAMS ((const char *, void (*) PARAMS ((unsigned long)), unsigned long, int)); static int vif_insn_type PARAMS ((char)); static int vif_length_value PARAMS ((char, int, int, int)); static void install_vif_length PARAMS ((char *, int)); const char comment_chars[] = ";"; const char line_comment_chars[] = "#"; const char line_separator_chars[] = "!"; const char EXP_CHARS[] = "eE"; const char FLT_CHARS[] = "dD"; /* Current assembler state. Instructions like mpg and direct are followed by a restricted set of instructions. In the case of a '*' length argument an end marker must be provided. (e.g. mpg is followed by vu insns until a .EndMpg is seen). Allowed state transitions: ASM_INIT <--> ASM_MPG ASM_DIRECT <--> ASM_GIF ASM_UNPACK <--> ASM_GIF ASM_VU ASM_GIF FIXME: Make the ASM_INIT -> ASM_VU a one way transition. ".vu" must be seen at the top of the file, and cannot be switched out of. */ typedef enum { ASM_INIT, ASM_DIRECT, ASM_MPG, ASM_UNPACK, ASM_VU, ASM_GIF, ASM_MAX } asm_state; /* We need to maintain a stack of the current and previous status to handle such things as "direct ...; gifpacked ... ; .endgif ; .enddirect". */ #define MAX_STATE_DEPTH 2 static asm_state asm_state_stack[MAX_STATE_DEPTH]; /* Current state's index in the stack. */ static int cur_state_level; /* Macro to fetch the current state. */ #define CUR_ASM_STATE (asm_state_stack[cur_state_level]) /* Functions to push/pop the state stack. */ static void push_asm_state PARAMS ((asm_state)); static void pop_asm_state PARAMS ((int)); static void set_asm_state PARAMS ((asm_state, const char *)); /* Set to non-zero if any non-vu insn seen. Used to control type of relocations emitted. */ static int non_vu_insn_seen_p = 0; /* Current cpu (machine variant) type state. We copy the mips16 way of recording what the current machine type is in the code. A label is created whenever necessary and has an "other" value the denotes the machine type. */ static dvp_cpu cur_cpu; /* Record the current mach type. */ static void record_mach PARAMS ((dvp_cpu, int)); /* Force emission of mach type label at next insn. This isn't static as TC_START_LABEL uses it. */ int force_mach_label PARAMS ((void)); /* Given a dvp_cpu value, return the STO_DVP value to use. */ static int cpu_sto PARAMS ((dvp_cpu, const char **)); /* Nonzero if inside .DmaData. */ static int dma_data_state = 0; /* Label of .DmaData (internally generated for inline data). */ static const char *dma_data_name; /* Variable length VIF insn support. */ /* Label at start of insn's data. */ static symbolS *vif_data_start; /* Label at end of insn's data. */ static symbolS *vif_data_end; /* Special symbol $.mpgloc. The value is in bytes. This value is kept absolute, for simplicity. The st_other field for this must always be set to STO_DVP_VU because symbols computed from this will get their st_other field clobbered with this one (via resolve_symbol_value,copy_symbol_attributes). */ static symbolS *mpgloc_sym; /* Handle of the current vu overlay section. */ static segT vuoverlay_section; /* The overlay table section is a table mapping lma's to vma's. */ static segT vuoverlay_table_section; /* String table to record section names in the overlay table. */ static segT vuoverlay_string_section; /* Table to map vu space labels to their overlay sections. Labels in vu space are first put in the ABS section to simplify PC relative branch calculations (s1 - s2 isn't supported if they're in different sections). Before the file is written out the labels are moved to their overlay section. */ typedef struct ovlysym { struct ovlysym *next; segT sec; symbolS *sym; } ovlysymS; static ovlysymS *ovlysym_table; /* GIF insn support. */ /* Type of insn. */ static int gif_insn_type; /* Name of label of insn's data. */ static const char *gif_data_name; /* Pointer to frag of insn. */ static fragS *gif_insn_frag; /* Pointer to current gif insn in gif_insn_frag. */ static char *gif_insn_frag_loc; /* The length value specified in the insn, or -1 if '*'. */ static int gif_user_value; /* Count of vu insns seen since the last mpg. Set to -1 to disable automatic mpg insertion. */ static int vu_count; /* Non-zero if packing vif instructions in dma tags. */ static int dma_pack_vif_p; /* Non-zero if dma insns are to be included in the output. This is the default, but writing "if (! no_dma)" is klunky. */ static int output_dma = 1; /* Non-zero if vif insns are to be included in the output. */ static int output_vif = 1; /* Current opcode/operand for use by md_operand. */ static const dvp_opcode *cur_opcode; static const dvp_operand *cur_operand; /* Options for the `caller' argument to s_endmpg. */ typedef enum { ENDMPG_USER, ENDMPG_INTERNAL, ENDMPG_MIDDLE } endmpg_caller; /* Relaxation support. */ #define RELAX_MPG 1 #define RELAX_DIRECT 2 /* vu insns aren't relaxed, but they use machine dependent frags so we must handle them during relaxation */ #define RELAX_VU 3 #define RELAX_ENCODE(type, growth) (10 + (growth)) #define RELAX_GROWTH(state) ((state) - 10) /* Return non-zero if STATE represents a relaxed state. */ #define RELAX_DONE_P(state) ((state) >= 10) const char *md_shortopts = ""; struct option md_longopts[] = { #define OPTION_NO_DMA (OPTION_MD_BASE + 1) { "no-dma", no_argument, NULL, OPTION_NO_DMA }, #define OPTION_NO_DMA_VIF (OPTION_NO_DMA + 1) { "no-dma-vif", no_argument, NULL, OPTION_NO_DMA_VIF }, {NULL, no_argument, NULL, 0} }; size_t md_longopts_size = sizeof(md_longopts); int md_parse_option (c, arg) int c; char *arg; { switch (c) { case OPTION_NO_DMA : output_dma = 0; break; case OPTION_NO_DMA_VIF : output_dma = 0; output_vif = 0; break; default : return 0; } return 1; } void md_show_usage (stream) FILE *stream; { fprintf (stream, "\ DVP options:\n\ -no-dma do not include DMA instructions in the output\n\ -no-dma-vif do not include DMA or VIF instructions in the output\n\ "); } static void s_dmadata PARAMS ((int)); static void s_enddmadata PARAMS ((int)); static void s_dmapackvif PARAMS ((int)); static void s_enddirect PARAMS ((int)); static void s_endmpg PARAMS ((int)); static void s_endunpack PARAMS ((int)); static void s_endgif PARAMS ((int)); static void s_vu PARAMS ((int)); static void s_dvp_func PARAMS ((int)); /* The target specific pseudo-ops which we support. */ const pseudo_typeS md_pseudo_table[] = { { "word", cons, 4 }, { "quad", cons, 16 }, { "dmadata", s_dmadata, 0 }, { "dmapackvif", s_dmapackvif, 0 }, { "enddirect", s_enddirect, 0 }, { "enddmadata", s_enddmadata, 0 }, { "endmpg", s_endmpg, ENDMPG_USER }, { "endunpack", s_endunpack, 0 }, { "endgif", s_endgif, 0 }, { "vu", s_vu, 0 }, /* We need to intercept .func/.endfunc so that we can prepend _$. ??? Not sure this is right though as _$foo is the lma version. */ { "func", s_dvp_func, 0 }, { "endfunc", s_dvp_func, 1 }, { NULL, NULL, 0 } }; void md_begin () { /* Initialize the opcode tables. This involves computing the hash chains. */ dvp_opcode_init_tables (0); /* Force a mach type label for the first insn. */ force_mach_label (); /* Initialize the parsing state. */ set_asm_state (ASM_INIT, NULL); /* Pack vif insns in dma tags by default. */ dma_pack_vif_p = 1; /* Disable automatic mpg insertion. */ vu_count = -1; /* Initialize $.mpgloc. */ mpgloc_sym = expr_build_uconstant (0); S_SET_OTHER (mpgloc_sym, STO_DVP_VU); /* Create the vu overlay table section. */ { /* Must preserve the current seg/subseg. It is the initial one. */ segT orig_seg = now_seg; subsegT orig_subseg = now_subseg; vuoverlay_table_section = subseg_new (SHNAME_DVP_OVERLAY_TABLE, 0); record_alignment (now_seg, 2); vuoverlay_string_section = subseg_new (SHNAME_DVP_OVERLAY_STRTAB, 0); /* Ensure first byte in executable is zero. So what if we waste a few bytes. */ FRAG_APPEND_1_CHAR (0); subseg_set (orig_seg, orig_subseg); } /* Set the type of the output file to r5900. */ bfd_set_arch_mach (stdoutput, bfd_arch_mips, 5900); } /* We need to keep a list of fixups. We can't simply generate them as we go, because that would require us to first create the frag, and that would screw up references to ``.''. */ struct dvp_fixup { /* the cpu this fixup is associated with */ dvp_cpu cpu; /* index into `dvp_operands' */ int opindex; /* byte offset from beginning of instruction */ int offset; /* user specified value [when there is one] */ int user_value; /* wl,cl values, only used with unpack insn */ short wl,cl; /* the expression */ expressionS exp; }; #define MAX_FIXUPS 5 static int fixup_count; static struct dvp_fixup fixups[MAX_FIXUPS]; /* Given a cpu type and operand number, return a temporary reloc type for use in generating the fixup that encodes the cpu type and operand. */ static int encode_fixup_reloc_type PARAMS ((dvp_cpu, int)); /* Given an encoded fixup reloc type, decode it into cpu and operand. */ static void decode_fixup_reloc_type PARAMS ((int, dvp_cpu *, const dvp_operand **)); static void assemble_dma PARAMS ((char *)); static void assemble_gif PARAMS ((char *)); static void assemble_vif PARAMS ((char *)); static void assemble_vu PARAMS ((char *)); static const dvp_opcode * assemble_vu_insn PARAMS ((dvp_cpu, const dvp_opcode *, const dvp_operand *, char **, char *)); static const dvp_opcode * assemble_one_insn PARAMS ((dvp_cpu, const dvp_opcode *, const dvp_operand *, int, int, char **, DVP_INSN *)); /* Main entry point for assembling an instruction. */ void md_assemble (str) char *str; { /* Skip leading white space. */ while (isspace (*str)) str++; /* After a gif tag, no insns can appear until a .endgif is seen. */ if (CUR_ASM_STATE == ASM_GIF) { as_bad ("missing .endgif"); pop_asm_state (1); /* We still parse the instruction. */ } if (CUR_ASM_STATE == ASM_INIT) { if (strncasecmp (str, "dma", 3) == 0) assemble_dma (str); else if (strncasecmp (str, "gif", 3) == 0) assemble_gif (str); else assemble_vif (str); non_vu_insn_seen_p = 1; } else if (CUR_ASM_STATE == ASM_DIRECT || CUR_ASM_STATE == ASM_UNPACK) { assemble_gif (str); non_vu_insn_seen_p = 1; } else if (CUR_ASM_STATE == ASM_VU || CUR_ASM_STATE == ASM_MPG) assemble_vu (str); else as_fatal ("internal error: unknown parse state"); } /* Subroutine of md_assemble to assemble DMA instructions. */ static void assemble_dma (str) char *str; { DVP_INSN insn_buf[2]; /* Insn's length, in 32 bit words. */ int len; /* Pointer to allocated frag. */ char *f; int i; const dvp_opcode *opcode; if (output_dma) { /* Do an implicit alignment to a 16 byte boundary. Do it now so that inline dma data labels are at the right place. */ /* ??? One can certainly argue all this implicit alignment is questionable. The thing is assembler programming is all that will mostly likely ever be done and not doing so forces an extra [and arguably unnecessary] burden on the programmer. */ frag_align (4, 0, 0); record_alignment (now_seg, 4); } /* This is the DMA tag. */ insn_buf[0] = 0; insn_buf[1] = 0; opcode = assemble_one_insn (DVP_DMA, dma_opcode_lookup_asm (str), dma_operands, 0, 0, &str, insn_buf); if (opcode == NULL) return; if (!output_dma) return; record_mach (DVP_DMA, 0); f = frag_more (8); /* Write out the DMA instruction. */ for (i = 0; i < 2; ++i) md_number_to_chars (f + i * 4, insn_buf[i], 4); /* Create any fixups. */ /* FIXME: It might eventually be possible to combine all the various copies of this bit of code. */ for (i = 0; i < fixup_count; ++i) { int op_type, reloc_type, offset; const dvp_operand *operand; /* Create a fixup for this operand. At this point we do not use a bfd_reloc_code_real_type for operands residing in the insn, but instead just use the operand index. This lets us easily handle fixups for any operand type, although that is admittedly not a very exciting feature. We pick a BFD reloc type in md_apply_fix. */ op_type = fixups[i].opindex; offset = fixups[i].offset; reloc_type = encode_fixup_reloc_type (DVP_DMA, op_type); operand = &dma_operands[op_type]; fix_new_exp (frag_now, f + offset - frag_now->fr_literal, 4, &fixups[i].exp, (operand->flags & DVP_OPERAND_RELATIVE_BRANCH) != 0, (bfd_reloc_code_real_type) reloc_type); } /* The upper two words are vif insns. */ record_mach (DVP_VIF, 0); /* If not doing dma/vif packing, fill out the insn with vif nops. ??? We take advantage of the fact that the default fill value of zero is the vifnop insn. This occurs for example when handling mpg alignment. It also occurs when one dma tag immediately follows the previous one. */ if (! dma_pack_vif_p) { f = frag_more (8); md_number_to_chars (f + 0, VIFNOP, 4); md_number_to_chars (f + 4, VIFNOP, 4); } } /* Subroutine of md_assemble to assemble VIF instructions. */ static void assemble_vif (str) char *str; { /* Space for the instruction. The variable length insns can require much more space than this. It is allocated later, when we know we have such an insn. */ DVP_INSN insn_buf[5]; /* Insn's length, in 32 bit words. */ int len; /* Pointer to allocated frag. */ char *f; int i,wl,cl; const dvp_opcode *opcode; fragS * insn_frag; /* Name of file to read data from. */ const char *file; /* Length in 32 bit words. */ int data_len; /* Macro expansion, if there is one. */ char * macstr; /* First check for macros. */ macstr = dvp_expand_macro (vif_macros, vif_macro_count, str); if (macstr) { /* The macro may expand into several insns (delimited with '\n'), so loop. */ char * next = macstr; do { char *p = strchr (next, '\n'); if (p) *p = 0; assemble_vif (next); next = p ? p + 1 : 0; } while (next); free (macstr); return; } opcode = assemble_one_insn (DVP_VIF, vif_opcode_lookup_asm (str), vif_operands, 0, 0, &str, insn_buf); if (opcode == NULL) return; if (opcode->flags & VIF_OPCODE_LENVAR) len = 1; /* actual data follows later */ else if (opcode->flags & VIF_OPCODE_LEN2) len = 2; else if (opcode->flags & VIF_OPCODE_LEN5) len = 5; else len = 1; /* We still have to switch modes (if mpg for example) so we can't exit early if -no-vif. */ if (output_vif) { /* Record the mach before doing the alignment so that we properly disassemble any inserted vifnop's. For mpg and direct insns force the recording of the mach type for the next insn. The data will switch the mach type and we want to ensure it's switched back. */ if (opcode->flags & (VIF_OPCODE_MPG | VIF_OPCODE_DIRECT)) record_mach (DVP_VIF, 1); else record_mach (DVP_VIF, 0); /* For variable length instructions record a fixup that is the symbol marking the end of the data. eval_expr will queue the fixup which will then be emitted later. */ if (opcode->flags & VIF_OPCODE_LENVAR) { char *name; asprintf (&name, "%s%s", LOCAL_LABEL_PREFIX, unique_name ("varlen")); vif_data_end = symbol_new (name, now_seg, 0, 0); symbol_table_insert (vif_data_end); fixups[fixup_count].cpu = DVP_VIF; fixups[fixup_count].exp.X_op = O_symbol; fixups[fixup_count].exp.X_add_symbol = vif_data_end; fixups[fixup_count].exp.X_add_number = 0; fixups[fixup_count].opindex = vif_operand_datalen_special; fixups[fixup_count].offset = 0; /* See what the user specified. */ vif_get_var_data (&file, &data_len); if (file) data_len = -1; fixups[fixup_count].user_value = data_len; /* Get the wl,cl values. Only useful for the unpack insn but it doesn't hurt to always record them. */ vif_get_wl_cl (&wl, &cl); fixups[fixup_count].wl = wl; fixups[fixup_count].cl = cl; ++fixup_count; } /* Obtain space in which to store the instruction. */ if (opcode->flags & VIF_OPCODE_MPG) { /* The data must be aligned on a 64 bit boundary (so the mpg insn comes just before that 64 bit boundary). Do this by putting the mpg insn in a relaxable fragment with a symbol that marks the beginning of the aligned data. */ /* Ensure relaxable fragments are in their own fragment. Otherwise md_apply_fix3 mishandles fixups to insns earlier in the fragment (because we set fr_opcode for the `mpg' insn because it can move in the fragment). */ frag_wane (frag_now); frag_new (0); /* One could combine the previous two lines with the following. They're not for clarity: keep separate the actions being performed. */ /* This dance with frag_grow is so we can record frag_now in insn_frag. frag_var always changes frag_now. We must allocate the maximal amount of space we need so there's room to move the insn in the frag during relaxation. */ frag_grow (8); /* Allocate space for the fixed part. */ f = frag_more (4); insn_frag = frag_now; frag_var (rs_machine_dependent, 4, /* max chars */ 0, /* variable part is empty at present */ RELAX_MPG, /* subtype */ NULL, /* no symbol */ 0, /* offset */ f); /* opcode */ frag_align (3, 0, 0); record_alignment (now_seg, 3); /* Put a symbol at the start of data. The relaxation code uses this to figure out how many bytes to insert. $.mpgloc calculations use it. The disassembler uses it. The overlay tracking table uses it. Update $.mpgloc. Create an overlay section. */ { int mpgloc = vif_get_mpgloc (); const char * section_name; /* Update $.mpgloc if explicitly set. Otherwise just use the current value. */ if (mpgloc != -1) { /* The value is recorded in bytes, mpgloc is in dwords. */ mpgloc_sym = expr_build_uconstant (mpgloc * 8); S_SET_OTHER (mpgloc_sym, STO_DVP_VU); } section_name = vuoverlay_section_name (mpgloc_sym); vif_data_start = create_colon_label (STO_DVP_VU, #if 0 VUOVERLAY_START_PREFIX, #else LOCAL_LABEL_PREFIX, #endif section_name); insn_frag->fr_symbol = vif_data_start; create_vuoverlay_section (section_name, mpgloc_sym, vif_data_start, vif_data_end); } } else if (opcode->flags & VIF_OPCODE_DIRECT) { /* The data must be aligned on a 128 bit boundary (so the direct insn comes just before that 128 bit boundary). Do this by putting the direct insn in a relaxable fragment. with a symbol that marks the beginning of the aligned data. */ /* Ensure relaxable fragments are in their own fragment. Otherwise md_apply_fix3 mishandles fixups to insns earlier in the fragment (because we set fr_opcode for the `direct' insn because it can move in the fragment). */ frag_wane (frag_now); frag_new (0); /* One could combine the previous two lines with the following. They're not for clarity: keep separate the actions being performed. */ /* This dance with frag_grow is so we can record frag_now in insn_frag. frag_var always changes frag_now. We must allocate the maximal amount of space we need so there's room to move the insn in the frag during relaxation. */ frag_grow (16); /* Allocate space for the fixed part. */ f = frag_more (4); insn_frag = frag_now; frag_var (rs_machine_dependent, 12, /* max chars */ 0, /* variable part is empty at present */ RELAX_DIRECT, /* subtype */ NULL, /* no symbol */ 0, /* offset */ f); /* opcode */ frag_align (4, 0, 0); record_alignment (now_seg, 4); /* Put a symbol at the start of data. The relaxation code uses this to figure out how many bytes to insert. */ vif_data_start = create_colon_label (0, LOCAL_LABEL_PREFIX, unique_name ("direct")); insn_frag->fr_symbol = vif_data_start; } else if (opcode->flags & VIF_OPCODE_UNPACK) { f = frag_more (len * 4); insn_frag = frag_now; /* Put a symbol at the start of data. $.unpackloc calculations use it. */ /* ??? $.unpackloc is gone. Is this also used for data length verification? */ vif_data_start = create_colon_label (STO_DVP_VIF, LOCAL_LABEL_PREFIX, unique_name ("unpack")); } else { /* Reminder: it is important to fetch enough space in one call to `frag_more'. We use (f - frag_now->fr_literal) to compute where we are and we don't want frag_now to change between calls. */ f = frag_more (len * 4); insn_frag = frag_now; } /* Write out the instruction. */ for (i = 0; i < len; ++i) md_number_to_chars (f + i * 4, insn_buf[i], 4); /* Create any fixups. */ /* FIXME: It might eventually be possible to combine all the various copies of this bit of code. */ for (i = 0; i < fixup_count; ++i) { int op_type, reloc_type, offset; const dvp_operand *operand; fixS *fixP; /* Create a fixup for this operand. At this point we do not use a bfd_reloc_code_real_type for operands residing in the insn, but instead just use the operand index. This lets us easily handle fixups for any operand type, although that is admittedly not a very exciting feature. We pick a BFD reloc type in md_apply_fix. */ op_type = fixups[i].opindex; offset = fixups[i].offset; reloc_type = encode_fixup_reloc_type (DVP_VIF, op_type); operand = &vif_operands[op_type]; fixP = fix_new_exp (insn_frag, f + offset - insn_frag->fr_literal, 4, &fixups[i].exp, (operand->flags & DVP_OPERAND_RELATIVE_BRANCH) != 0, (bfd_reloc_code_real_type) reloc_type); fixP->tc_fix_data.user_value = fixups[i].user_value; fixP->tc_fix_data.wl = fixups[i].wl; fixP->tc_fix_data.cl = fixups[i].cl; /* Set fx_tcbit so other parts of the code know this fixup is for a vif insn. */ fixP->fx_tcbit = 1; } } /* Handle variable length insns. */ if (opcode->flags & VIF_OPCODE_LENVAR) { /* See what the user specified. */ vif_get_var_data (&file, &data_len); if (file) { int byte_len; /* The handling for each of mpg,direct,unpack is basically the same: - emit a label to set the mach type for the data we're inserting - switch to the new assembler state - insert the file - call the `end' handler */ if (opcode->flags & VIF_OPCODE_MPG) { record_mach (DVP_VUUP, 1); set_asm_state (ASM_MPG, "mpg"); byte_len = insert_file (file, insert_mpg_marker, 0, 256 * 8); s_endmpg (ENDMPG_INTERNAL); } else if (opcode->flags & VIF_OPCODE_DIRECT) { record_mach (DVP_GIF, 1); set_asm_state (ASM_DIRECT, "direct"); byte_len = insert_file (file, NULL, 0, 0); s_enddirect (1); } else if (opcode->flags & VIF_OPCODE_UNPACK) { int max_len = 0; /*unpack_max_byte_len (insn_buf[0]);*/ set_asm_state (ASM_UNPACK, "unpack"); byte_len = insert_file (file, NULL /*insert_unpack_marker*/, insn_buf[0], max_len); s_endunpack (1); } else as_fatal ("internal error: unknown cpu type for variable length vif insn"); } else /* file == NULL */ { /* data_len == -1 means the value must be computed from the data. */ if (data_len <= -2) as_bad ("invalid data length"); if (output_vif && data_len != -1) install_vif_length (f, data_len); if (opcode->flags & VIF_OPCODE_MPG) { set_asm_state (ASM_MPG, "mpg"); /* Enable automatic mpg insertion every 256 insns. */ vu_count = 0; } else if (opcode->flags & VIF_OPCODE_DIRECT) set_asm_state (ASM_DIRECT, "direct"); else if (opcode->flags & VIF_OPCODE_UNPACK) set_asm_state (ASM_UNPACK, "unpack"); } } } /* Subroutine of md_assemble to assemble GIF instructions. We assume CUR_ASM_STATE is one of ASM_{INIT,DIRECT,UNPACK}. */ static void assemble_gif (str) char *str; { DVP_INSN insn_buf[4]; const dvp_opcode *opcode; char *f; int i; insn_buf[0] = insn_buf[1] = insn_buf[2] = insn_buf[3] = 0; opcode = assemble_one_insn (DVP_GIF, gif_opcode_lookup_asm (str), gif_operands, 0, 0, &str, insn_buf); if (opcode == NULL) return; /* Do an implicit alignment to a 16 byte boundary. */ frag_align (4, 0, 0); record_alignment (now_seg, 4); /* Insert a label so we can compute the number of quadwords when the .endgif is seen. This is put before the mach type label because gif insns are followed by data and we don't want the disassembler to try to disassemble them as mips insns (since it uses the st_other field) of the closest label to choose the mach type and since we don't have a special st_other value for "data". */ gif_data_name = S_GET_NAME (create_colon_label (0, LOCAL_LABEL_PREFIX, unique_name ("gifdata"))); record_mach (DVP_GIF, 1); gif_insn_frag_loc = f = frag_more (16); gif_insn_frag = frag_now; for (i = 0; i < 4; ++i) md_number_to_chars (f + i * 4, insn_buf[i], 4); /* Record the type of the gif tag so we know how to compute nloop in s_endgif. */ if (strcmp (opcode->mnemonic, "gifpacked") == 0) gif_insn_type = GIF_PACKED; else if (strcmp (opcode->mnemonic, "gifreglist") == 0) gif_insn_type = GIF_REGLIST; else if (strcmp (opcode->mnemonic, "gifimage") == 0) gif_insn_type = GIF_IMAGE; else abort (); push_asm_state (ASM_GIF); } /* Subroutine of md_assemble to assemble VU instructions. */ static void assemble_vu (str) char *str; { int i; char *f; const dvp_opcode *opcode; /* The lower instruction has the lower address so insns[0] = lower insn, insns[1] = upper insn. */ DVP_INSN insns[2]; fragS * insn_frag; /* Handle automatic mpg insertion if enabled. */ if (CUR_ASM_STATE == ASM_MPG && vu_count == 256) insert_mpg_marker (0); /* Do an implicit alignment to a 8 byte boundary. */ frag_align (3, 0, 0); record_alignment (now_seg, 3); record_mach (DVP_VUUP, 0); #ifdef VERTICAL_BAR_SEPARATOR char *p = strchr (str, '|'); if (p == NULL) { as_bad ("lower instruction missing"); return; } *p = 0; opcode = assemble_one_insn (DVP_VUUP, vu_upper_opcode_lookup_asm (str), vu_operands, 0, 4, &str, &insns[1]); *p = '|'; str = p + 1; #else opcode = assemble_one_insn (DVP_VUUP, vu_upper_opcode_lookup_asm (str), vu_operands, 0, 4, &str, &insns[1]); #endif /* Don't assemble next one if we couldn't assemble the first. */ if (opcode == NULL) return; if (*str == 0) { as_bad ("lower instruction missing"); return; } /* Assemble the lower insn. Pass `fixup_count' for `init_fixup_count' so that we don't clobber any fixups the upper insn had. */ opcode = assemble_one_insn (DVP_VULO, vu_lower_opcode_lookup_asm (str), vu_operands, fixup_count, 0, &str, &insns[0]); if (opcode == NULL) return; /* If there were fixups and we're inside mpg, create a machine dependent fragment so that we can record the current value of $.mpgloc in fr_symbol. Reminder: it is important to fetch enough space in one call to `frag_more'. We use (f - frag_now->fr_literal) to compute where we are and we don't want frag_now to change between calls. */ if (fixup_count != 0 && CUR_ASM_STATE == ASM_MPG) { symbolS * cur_mpgloc; /* Ensure we get a new frag. */ frag_wane (frag_now); frag_new (0); /* Compute the current $.mpgloc. */ cur_mpgloc = compute_mpgloc (mpgloc_sym, vif_data_start, expr_build_dot ()); /* We need to use frag_now afterwards, so we can't just call frag_var. Instead we use frag_more and save the value of frag_now in insn_frag. */ f = frag_more (8); insn_frag = frag_now; /* Turn the frag into a machine dependent frag. */ frag_variant (rs_machine_dependent, 0, /* max chars */ 0, /* no variable part */ RELAX_VU, /* subtype */ cur_mpgloc, /* $.mpgloc */ 0, /* offset */ NULL); /* opcode */ } else { f = frag_more (8); insn_frag = frag_now; } /* Write out the instructions. */ md_number_to_chars (f, insns[0], 4); md_number_to_chars (f + 4, insns[1], 4); /* Create any fixups. */ for (i = 0; i < fixup_count; ++i) { int op_type, reloc_type; const dvp_operand *operand; dvp_cpu cpu; /* Create a fixup for this operand. At this point we do not use a bfd_reloc_code_real_type for operands residing in the insn, but instead just use the operand index. This lets us easily handle fixups for any operand type, although that is admittedly not a very exciting feature. We pick a BFD reloc type in md_apply_fix. */ cpu = fixups[i].cpu; op_type = fixups[i].opindex; reloc_type = encode_fixup_reloc_type (cpu, op_type); operand = &vu_operands[op_type]; /* Branch operands inside mpg have to be handled specially. We want a pc relative relocation in a section different from our own. See the br-2.s dejagnu testcase for a good example. */ if (CUR_ASM_STATE == ASM_MPG && (operand->flags & DVP_OPERAND_RELATIVE_BRANCH) != 0) { symbolS *e1,*e2,*diff_expr; /* For "br foo" we want "foo - (. + 8)". */ e1 = expr_build_binary (O_add, insn_frag->fr_symbol, expr_build_uconstant (8)); e2 = make_expr_symbol (&fixups[i].exp); diff_expr = expr_build_binary (O_subtract, e2, e1); fixups[i].exp.X_op = O_symbol; fixups[i].exp.X_add_symbol = diff_expr; fixups[i].exp.X_add_number = 0; } fix_new_exp (insn_frag, f + fixups[i].offset - insn_frag->fr_literal, 4, &fixups[i].exp, CUR_ASM_STATE == ASM_MPG /* pcrel */ ? 0 : (operand->flags & DVP_OPERAND_RELATIVE_BRANCH) != 0, (bfd_reloc_code_real_type) reloc_type); } /* If this was the "loi" pseudo-insn, we need to set the `i' bit. */ if (strcmp (opcode->mnemonic, "loi") == 0) f[7] |= 0x80; /* Increment the vu insn counter. If get reach 256 we need to insert an `mpg'. */ ++vu_count; } /* Assemble one instruction at *PSTR. CPU indicates what component we're assembling for. The assembled instruction is stored in INSN_BUF. OPCODE is a pointer to the head of the hash chain. INIT_FIXUP_COUNT is the initial value for `fixup_count'. It exists to allow the fixups for multiple calls to this insn to be queued up before actually emitting them. *PSTR is updated to point passed the parsed instruction. If the insn is successfully parsed the result is a pointer to the opcode entry that successfully matched and *PSTR is updated to point passed the parsed insn. If an error occurs the result is NULL and *PSTR is left at some random point in the string (??? may wish to leave it pointing where the error occured). */ static const dvp_opcode * assemble_one_insn (cpu, opcode, operand_table, init_fixup_count, fixup_offset, pstr, insn_buf) dvp_cpu cpu; const dvp_opcode *opcode; const dvp_operand *operand_table; int init_fixup_count; int fixup_offset; char **pstr; DVP_INSN *insn_buf; { char *start, *str; /* Keep looking until we find a match. */ start = str = *pstr; for ( ; opcode != NULL; opcode = DVP_OPCODE_NEXT_ASM (opcode)) { int past_opcode_p, num_suffixes; const unsigned char *syn; /* Ensure the mnemonic part matches. */ for (str = start, syn = opcode->mnemonic; *syn != '\0'; ++str, ++syn) if (tolower (*str) != tolower (*syn)) break; if (*syn != '\0') continue; /* Scan the syntax string. If it doesn't match, try the next one. */ dvp_opcode_init_parse (); insn_buf[opcode->opcode_word] = opcode->value; fixup_count = init_fixup_count; past_opcode_p = 0; num_suffixes = 0; /* We don't check for (*str != '\0') here because we want to parse any trailing fake arguments in the syntax string. */ for (/*str = start, */ syn = opcode->syntax; *syn != '\0'; ) { int mods,index; const dvp_operand *operand; const char *errmsg; long value; /* Non operand chars must match exactly. Operand chars that are letters are not part of symbols and are case insensitive. */ if (*syn < 128) { if (tolower (*str) == tolower (*syn)) { if (*syn == ' ') past_opcode_p = 1; ++syn; ++str; } else break; continue; } /* We have a suffix or an operand. Pick out any modifiers. */ mods = 0; index = DVP_OPERAND_INDEX (*syn); while (DVP_MOD_P (operand_table[index].flags)) { mods |= operand_table[index].flags & DVP_MOD_BITS; ++syn; index = DVP_OPERAND_INDEX (*syn); } operand = operand_table + index; if (operand->flags & DVP_OPERAND_FAKE) { long value = 0; if (operand->flags & DVP_OPERAND_DMA_INLINE) { inline_dma_data ((mods & DVP_OPERAND_AUTOCOUNT) != 0, insn_buf); ++syn; continue; } if (operand->parse) { errmsg = NULL; value = (*operand->parse) (opcode, operand, mods, &str, &errmsg); if (errmsg) break; } if (operand->insert) { errmsg = NULL; (*operand->insert) (opcode, operand, mods, insn_buf, (offsetT) value, &errmsg); /* If we get an error, go on to try the next insn. */ if (errmsg) break; } ++syn; continue; } /* Are we finished with suffixes? */ if (!past_opcode_p) { long suf_value; if (!(operand->flags & DVP_OPERAND_SUFFIX)) as_fatal ("internal error: bad opcode table, missing suffix flag"); /* Parse the suffix. If we're at a space in the input string there are no more suffixes. Suffix parse routines must be prepared to deal with this. */ errmsg = NULL; suf_value = (*operand->parse) (opcode, operand, mods, &str, &errmsg); if (errmsg) { /* This can happen, for example, in ARC's in "blle foo" and we're currently using the template "b%q%.n %j". The "bl" insn occurs later in the table so "lle" isn't an illegal suffix. */ break; } /* Insert the suffix's value into the insn. */ insert_operand (cpu, opcode, operand, mods, insn_buf, (offsetT) suf_value, &errmsg); ++syn; continue; } /* This is an operand, either a register or an expression of some kind. */ value = 0; if (operand->flags & DVP_OPERAND_SUFFIX) as_fatal ("internal error: bad opcode table, suffix wrong"); /* Is there anything left to parse? We don't check for this at the top because we want to parse any trailing fake arguments in the syntax string. */ /* ??? This doesn't allow operands with a legal value of "". */ if (*str == '\0') break; /* Parse the operand. */ if (operand->flags & DVP_OPERAND_FLOAT) { errmsg = 0; value = parse_float (&str, &errmsg); if (errmsg) break; } else if ((operand->flags & DVP_OPERAND_DMA_ADDR) && (mods & DVP_OPERAND_AUTOCOUNT)) { errmsg = 0; value = parse_dma_addr_autocount (opcode, operand, mods, insn_buf, &str, &errmsg); if (errmsg) break; } else { char *origstr,*hold; expressionS exp; /* First see if there is a special parser. */ origstr = str; if (operand->parse) { errmsg = NULL; value = (*operand->parse) (opcode, operand, mods, &str, &errmsg); if (errmsg) break; } /* If there wasn't a special parser, or there was and it left the input stream unchanged, use the general expression parser. */ if (str == origstr) { hold = input_line_pointer; input_line_pointer = str; /* Set cur_{opcode,operand} for md_operand. */ cur_opcode = opcode; cur_operand = operand; expression (&exp); cur_opcode = NULL; str = input_line_pointer; input_line_pointer = hold; if (exp.X_op == O_illegal || exp.X_op == O_absent) break; else if (exp.X_op == O_constant) value = exp.X_add_number; else if (exp.X_op == O_register) as_fatal ("internal error: got O_register"); else { /* We need to generate a fixup for this expression. */ if (fixup_count >= MAX_FIXUPS) as_fatal ("internal error: too many fixups"); fixups[fixup_count].cpu = cpu; fixups[fixup_count].exp = exp; fixups[fixup_count].opindex = index; /* FIXME: Revisit. Do we really need operand->word? The endianness of a 128 bit DMAtag is rather twisted. How about defining word 0 as the word with the lowest address and basing operand-shift off that. operand->word could then be deleted. */ fixups[fixup_count].offset = fixup_offset; if (operand->word != 0) fixups[fixup_count].offset += operand->word * 4; else fixups[fixup_count].offset += (operand->shift / 32) * 4; ++fixup_count; value = 0; } } } /* Insert the register or expression into the instruction. */ errmsg = NULL; insert_operand (cpu, opcode, operand, mods, insn_buf, (offsetT) value, &errmsg); if (errmsg != (const char *) NULL) break; ++syn; } /* If we're at the end of the syntax string, we're done. */ if (*syn == '\0') { int i; /* For the moment we assume a valid `str' can only contain blanks now. IE: We needn't try again with a longer version of the insn and it is assumed that longer versions of insns appear before shorter ones (eg: lsr r2,r3,1 vs lsr r2,r3). */ while (isspace (*str)) ++str; if (*str != '\0' #ifndef VERTICAL_BAR_SEPARATOR && cpu != DVP_VUUP #endif ) as_bad ("junk at end of line: `%s'", str); /* It's now up to the caller to emit the instruction and any relocations. */ *pstr = str; return opcode; } /* Try the next entry. */ } as_bad ("bad instruction `%s'", start); return 0; } /* Given a dvp cpu type, return it's STO_DVP value. The label prefix to use is stored in *PNAME. */ static int cpu_sto (cpu, pname) dvp_cpu cpu; const char **pname; { switch (cpu) { case DVP_DMA : *pname = ".dma."; return STO_DVP_DMA; case DVP_VIF : *pname = ".vif."; return STO_DVP_VIF; case DVP_GIF : *pname = ".gif."; return STO_DVP_GIF; case DVP_VUUP : *pname = ".vu."; return STO_DVP_VU; } abort (); } /* Record the current mach type in the object file. If FORCE_NEXT_P is non-zero, force a label to be emitted the next time we're called. This is useful for variable length instructions that can have labels embedded within them. */ static void record_mach (cpu, force_next_p) dvp_cpu cpu; int force_next_p; { symbolS *label; const char *name; int sto; if (cpu == cur_cpu) return; sto = cpu_sto (cpu, &name); label = create_colon_label (sto, "", unique_name (name)); if (force_next_p) cur_cpu = DVP_UNKNOWN; else cur_cpu = cpu; } /* Force emission of mach type label at next insn. This isn't static as TC_START_LABEL uses it. The result is the value of TC_START_LABEL. */ int force_mach_label () { cur_cpu = DVP_UNKNOWN; return 1; } /* Push the current parsing state to NEW_STATE. */ static void push_asm_state (new_state) asm_state new_state; { asm_state cur_state = CUR_ASM_STATE; ++cur_state_level; if (cur_state_level == MAX_STATE_DEPTH) as_fatal ("internal error: unexpected state push"); asm_state_stack[cur_state_level] = new_state; } /* TOP_OK_P is non-zero if it's ok that we're at the top of the stack. If so we reset the state to ASM_INIT. */ static void pop_asm_state (top_ok_p) int top_ok_p; { if (cur_state_level == 0) { if (! top_ok_p) as_fatal ("internal error: unexpected state pop"); CUR_ASM_STATE = ASM_INIT; } else --cur_state_level; } /* Set the top level assembler state. */ static void set_asm_state (state, insn_name) asm_state state; const char *insn_name; { if (insn_name) { if (CUR_ASM_STATE != ASM_INIT) as_bad ("illegal place for `%s' instruction", insn_name); } cur_state_level = 0; CUR_ASM_STATE = state; } void md_operand (expressionP) expressionS *expressionP; { /* Check if this is a '*' for mpgloc. */ if (cur_opcode && (cur_opcode->flags & VIF_OPCODE_MPG) != 0 && (cur_operand->flags & DVP_OPERAND_VU_ADDRESS) != 0 && *input_line_pointer == '*') { expressionP->X_op = O_symbol; expressionP->X_add_symbol = mpgloc_sym; expressionP->X_add_number = 0; /* Advance over the '*'. */ ++input_line_pointer; return; } } valueT md_section_align (segment, size) segT segment; valueT size; { int align = bfd_get_section_alignment (stdoutput, segment); return ((size + (1 << align) - 1) & (-1 << align)); } symbolS * md_undefined_symbol (name) char *name; { return 0; } /* Called after parsing the file via md_after_pass_hook. */ void dvp_after_pass_hook () { /* If doing dma packing, ensure the last dma tag is filled out. */ if (dma_pack_vif_p) { /* Nothing to do as vifnops are zero and frag_align at beginning of dmatag is all we need. */ } #if 0 /* ??? Doesn't work unless we keep track of the nested include file level. */ /* Check for missing .EndMpg, and supply one if necessary. */ if (CUR_ASM_STATE == ASM_MPG) s_endmpg (ENDMPG_INTERNAL); else if (CUR_ASM_STATE == ASM_DIRECT) s_enddirect (0); else if (CUR_ASM_STATE == ASM_UNPACK) s_endunpack (0); #endif } /* Called after parsing all files via md_end. */ void dvp_end () { /* Check for missing .EndMpg, etc. */ if (CUR_ASM_STATE == ASM_MPG) as_bad ("missing `.endmpg'"); else if (CUR_ASM_STATE == ASM_DIRECT) as_bad ("missing `.enddirect'"); else if (CUR_ASM_STATE == ASM_UNPACK) as_bad ("missing `.endunpack'"); } /* Called via tc_frob_label when a label is defined. */ void dvp_frob_label (sym) symbolS *sym; { const char * name = S_GET_NAME (sym); /* All labels in vu code must be specially marked for the disassembler. The disassembler ignores all previous information at each new label (that has a higher address than the last one). */ if (CUR_ASM_STATE == ASM_MPG || CUR_ASM_STATE == ASM_VU) S_SET_OTHER (sym, STO_DVP_VU); /* If inside an mpg, move vu space labels to their own section and create the corresponding _$ version in normal space. */ if (CUR_ASM_STATE == ASM_MPG /* Only do this special processing for user specified symbols. Not sure how we can distinguish them other than by some prefix. */ && *name != '.' && *name != '$' /* Check for recursive invocation creating the _$name. */ && strncmp (name, VU_LABEL_PREFIX, sizeof (VU_LABEL_PREFIX) - 1) != 0 /* -gstabs creates FAKE_LABEL_NAME labels. There's probably a better test than this. */ && ! S_IS_LOCAL (sym)) { /* Move this symbol to the vu overlay. */ symbolS * cur_mpgloc = compute_mpgloc (mpgloc_sym, vif_data_start, expr_build_dot ()); #if 0 /* Don't do this now, leave in ABS and then move to overlay section before file is written. */ S_SET_SEGMENT (sym, vuoverlay_section); #else /* Record the overlay section this symbol is in. */ { ovlysymS *p = (ovlysymS *) xmalloc (sizeof (ovlysymS)); p->next = ovlysym_table; p->sec = vuoverlay_section; p->sym = sym; ovlysym_table = p; } S_SET_SEGMENT (sym, expr_section); #endif sym->sy_value = cur_mpgloc->sy_value; sym->sy_frag = &zero_address_frag; /* Create the _$ symbol in normal space. */ create_colon_label (STO_DVP_VU, VU_LABEL_PREFIX, name); } } /* Move vu space symbols into their overlay sections. Called via tc_frob_file. */ void dvp_frob_file () { ovlysymS *p; for (p = ovlysym_table; p; p = p->next) { /* See the comment near tc_frob_file in write.c. We are responsible for updating sym->bsym->value. */ S_SET_SEGMENT (p->sym, p->sec); /* Adjust for the section's vma. */ /* FIXME: bfd doesn't get this right, it adds the section vma back in (in elf.c:swap_out_syms). As a workaround the section vma is assumed to be zero. Of course, there might not be a point in setting it to non-zero anyway. */ p->sym->bsym->value -= bfd_get_section_vma (stdoutput, p->sec); } } /* mpg/direct alignment is handled via relaxation */ /* Return an initial guess of the length by which a fragment must grow to hold a branch to reach its destination. Also updates fr_type/fr_subtype as necessary. Called just before doing relaxation. Any symbol that is now undefined will not become defined. The guess for fr_var is ACTUALLY the growth beyond fr_fix. Whatever we do to grow fr_fix or fr_var contributes to our returned value. Although it may not be explicit in the frag, pretend fr_var starts with a 0 value. */ int md_estimate_size_before_relax (fragP, segment) fragS * fragP; segT segment; { /* Our initial estimate is always 0. */ return 0; } /* Perform the relaxation. STRETCH is the amount the start of the frag has already been shifted by. All we have to do is figure out how many bytes we need to insert to get to the recorded symbol (which is at the required alignment). This function is also called for machine dependent vu insn frags. In this case the growth is always 0. */ long dvp_relax_frag (fragP, stretch) fragS * fragP; long stretch; { /* Address of variable part. */ long address = fragP->fr_address + fragP->fr_fix; /* Symbol marking start of data. */ symbolS * symbolP = fragP->fr_symbol; /* Address of the symbol. */ long target; long growth; /* subtype >= 10 means "done" */ if (RELAX_DONE_P (fragP->fr_subtype)) return 0; /* vu insn? */ if (fragP->fr_subtype == RELAX_VU) { fragP->fr_subtype = RELAX_ENCODE (RELAX_VU, 0); return 0; } target = S_GET_VALUE (symbolP) + symbolP->sy_frag->fr_address; if (fragP->fr_subtype == RELAX_MPG) { /* The frag the symbol is in hasn't been relaxed yet so any .org adjustments haven't been applied to it. We know the symbol is the address of the next frag so adjust target by stretch. */ target += stretch; growth = target - address; if (growth < 0) as_fatal ("internal error: bad mpg alignment handling"); fragP->fr_subtype = RELAX_ENCODE (RELAX_MPG, growth); return growth; } if (fragP->fr_subtype == RELAX_DIRECT) { /* The frag the symbol is in hasn't been relaxed yet so any .org adjustments haven't been applied to it. We know the symbol is the address of the next frag so adjust target by stretch. */ target += stretch; growth = target - address; if (growth < 0) as_fatal ("internal error: bad direct alignment handling"); fragP->fr_subtype = RELAX_ENCODE (RELAX_DIRECT, growth); return growth; } as_fatal ("internal error: unknown fr_subtype"); } /* *fragP has been relaxed to its final size, and now needs to have the bytes inside it modified to conform to the new size. Called after relaxation is finished. fragP->fr_type == rs_machine_dependent. fragP->fr_subtype is the subtype of what the address relaxed to. */ void md_convert_frag (abfd, sec, fragP) bfd * abfd; segT sec; fragS * fragP; { int growth = RELAX_GROWTH (fragP->fr_subtype); fragP->fr_fix += growth; if (growth != 0) { /* We had to grow this fragment. Shift the mpg/direct insn to the end (so it abuts the following data). */ DVP_INSN insn = bfd_getl32 (fragP->fr_opcode); md_number_to_chars (fragP->fr_opcode, VIFNOP, 4); if (growth > 4) md_number_to_chars (fragP->fr_opcode + 4, VIFNOP, 4); if (growth > 8) md_number_to_chars (fragP->fr_opcode + 8, VIFNOP, 4); md_number_to_chars (fragP->fr_literal + fragP->fr_fix - 4, insn, 4); /* Adjust fr_opcode so md_apply_fix3 works with the right bytes. */ fragP->fr_opcode += growth; } } /* Functions concerning relocs. */ /* Spacing between each cpu type's operand numbers. Should be at least as big as any operand table. */ #define RELOC_SPACING 256 /* Given a cpu type and operand number, return a temporary reloc type for use in generating the fixup that encodes the cpu type and operand number. */ static int encode_fixup_reloc_type (cpu, opnum) dvp_cpu cpu; int opnum; { return (int) BFD_RELOC_UNUSED + ((int) cpu * RELOC_SPACING) + opnum; } /* Given a fixup reloc type, decode it into cpu type and operand. */ static void decode_fixup_reloc_type (fixup_reloc, cpuP, operandP) int fixup_reloc; dvp_cpu *cpuP; const dvp_operand **operandP; { dvp_cpu cpu = (fixup_reloc - (int) BFD_RELOC_UNUSED) / RELOC_SPACING; int opnum = (fixup_reloc - (int) BFD_RELOC_UNUSED) % RELOC_SPACING; *cpuP = cpu; switch (cpu) { case DVP_VUUP : *operandP = &vu_operands[opnum]; break; case DVP_VULO : *operandP = &vu_operands[opnum]; break; case DVP_DMA : *operandP = &dma_operands[opnum]; break; case DVP_VIF : *operandP = &vif_operands[opnum]; break; case DVP_GIF : *operandP = &gif_operands[opnum]; break; default : as_fatal ("internal error: bad fixup encoding"); } } /* The location from which a PC relative jump should be calculated, given a PC relative reloc. */ long md_pcrel_from_section (fixP, sec) fixS *fixP; segT sec; { if (fixP->fx_addsy != (symbolS *) NULL && (! S_IS_DEFINED (fixP->fx_addsy) || S_GET_SEGMENT (fixP->fx_addsy) != sec)) { /* If fx_tcbit is set this is for a vif insn and thus should never happen in correct code. */ /* ??? The error message could be a bit more descriptive. */ if (fixP->fx_tcbit) as_bad ("unable to compute length of vif insn"); /* The symbol is undefined (or is defined but not in this section). Let the linker figure it out. +8: branch offsets are relative to the delay slot. */ return 8; } /* If fx_tcbit is set, this is a vif end-of-variable-length-insn marker. In this case the offset is relative to the start of data. Otherwise we assume this is a vu branch. In this case offsets are calculated based on the address of the next insn. */ if (fixP->fx_tcbit) { /* As a further refinement, if fr_opcode is NULL this is `unpack' which doesn't involve any relaxing. */ if (fixP->fx_frag->fr_opcode == NULL) return fixP->fx_frag->fr_address + fixP->fx_where + 4; else return fixP->fx_frag->fr_address + fixP->fx_frag->fr_fix; } else return ((fixP->fx_frag->fr_address + fixP->fx_where) & -8L) + 8; } /* Apply a fixup to the object code. This is called for all the fixups we generated by calls to fix_new_exp. At this point all symbol values should be fully resolved, and we attempt to completely resolve the reloc. If we can not do that, we determine the correct reloc code and put it back in the fixup. */ int md_apply_fix3 (fixP, valueP, seg) fixS *fixP; valueT *valueP; segT seg; { char *where = fixP->fx_frag->fr_literal + fixP->fx_where; valueT value; /* FIXME FIXME FIXME: The value we are passed in *valueP includes the symbol values. Since we are using BFD_ASSEMBLER, if we are doing this relocation the code in write.c is going to call bfd_perform_relocation, which is also going to use the symbol value. That means that if the reloc is fully resolved we want to use *valueP since bfd_perform_relocation is not being used. However, if the reloc is not fully resolved we do not want to use *valueP, and must use fx_offset instead. However, if the reloc is PC relative, we do want to use *valueP since it includes the result of md_pcrel_from. This is confusing. */ if (fixP->fx_addsy == (symbolS *) NULL) { value = *valueP; fixP->fx_done = 1; } else if (fixP->fx_pcrel) { value = *valueP; } else { value = fixP->fx_offset; if (fixP->fx_subsy != (symbolS *) NULL) { if (S_GET_SEGMENT (fixP->fx_subsy) == absolute_section) value -= S_GET_VALUE (fixP->fx_subsy); else { /* We can't actually support subtracting a symbol. */ as_bad_where (fixP->fx_file, fixP->fx_line, "expression too complex"); } } } /* Check for dvp operands. These are indicated with a reloc value >= BFD_RELOC_UNUSED. */ if ((int) fixP->fx_r_type >= (int) BFD_RELOC_UNUSED) { dvp_cpu cpu; const dvp_operand *operand; DVP_INSN insn; fragS *fragP = fixP->fx_frag; /* If this was a relaxable insn, the opcode may have moved. Find it. */ if (fragP->fr_opcode != NULL) where = fragP->fr_opcode; decode_fixup_reloc_type ((int) fixP->fx_r_type, & cpu, & operand); /* For variable length vif insn data lengths, validate the user specified value or install the computed value in the instruction. */ if (cpu == DVP_VIF && (operand - vif_operands) == vif_operand_datalen_special) { int insn_type = vif_insn_type (where[3]); value = vif_length_value (where[3], fixP->tc_fix_data.wl, fixP->tc_fix_data.cl, value); if (fixP->tc_fix_data.user_value != -1) { /* We can't do this for unpack insns with wl > cl. */ if ((insn_type != VIF_OPCODE_UNPACK || (fixP->tc_fix_data.wl <= fixP->tc_fix_data.cl)) && fixP->tc_fix_data.user_value != value) as_warn_where (fixP->fx_file, fixP->fx_line, "specified length value doesn't match computed value"); /* Don't override the user specified value. */ } else { if (output_vif) { install_vif_length (where, value); } } fixP->fx_done = 1; return 1; } /* For the gif nloop operand, if it was specified by the user ensure it matches the value we computed. */ if (cpu == DVP_GIF && (operand - gif_operands) == gif_operand_nloop) { value = compute_nloop (fixP->tc_fix_data.type, fixP->tc_fix_data.nregs, value); if (fixP->tc_fix_data.user_value != -1) { check_nloop (fixP->tc_fix_data.type, fixP->tc_fix_data.nregs, fixP->tc_fix_data.user_value, value, fixP->fx_file, fixP->fx_line); /* Don't override the user specified value. */ fixP->fx_done = 1; return 1; } } /* ??? It might be cleaner to not do this at all here (when ! fx_done) and leave it to bfd_install_relocation. */ if ((operand->flags & DVP_OPERAND_RELOC_U15_S3) != 0) value >>= 3; else if ((operand->flags & DVP_OPERAND_RELOC_11_S4) != 0) value >>= 4; /* Fetch the instruction, insert the fully resolved operand value, and stuff the instruction back again. The fixup is recorded at the appropriate word so pass DVP_MOD_THIS_WORD so any offset specified in the tables is ignored. */ insn = bfd_getl32 ((unsigned char *) where); insert_operand_final (cpu, operand, DVP_MOD_THIS_WORD, &insn, (offsetT) value, fixP->fx_file, fixP->fx_line); bfd_putl32 ((bfd_vma) insn, (unsigned char *) where); /* If this is mpgloc/unpackloc, we're done. */ if (operand->flags & (DVP_OPERAND_VU_ADDRESS | DVP_OPERAND_UNPACK_ADDRESS)) fixP->fx_done = 1; if (fixP->fx_done) { /* Nothing else to do here. */ return 1; } /* Determine a BFD reloc value based on the operand information. We are only prepared to turn a few of the operands into relocs. */ if ((operand->flags & DVP_OPERAND_RELATIVE_BRANCH) != 0) { assert (operand->bits == 11 && operand->shift == 0); /* The fixup isn't recorded as a pc relative branch to some label. Instead a complicated expression is used to compute the desired value. Well, that didn't work and we have to emit a reloc. Things are tricky because the result we want is the difference of two addresses in a section potentially different from the one the reloc is in. Ugh. The solution is to emit two relocs, one that adds the target address and one that subtracts the source address + 8 (the linker will perform the byte->dword conversion). This is rather complicated and rather than risk breaking existing code we fall back on the old way if the file only contains vu code. In this case the file is intended to be fully linked with other vu code and thus we have a normal situation where the relocation directly corresponds to the branch insn. */ if (non_vu_insn_seen_p) { as_bad_where (fixP->fx_file, fixP->fx_line, "can't handle mpg loaded vu code with branch relocations"); fixP->fx_done = 1; return 1; } else { fixP->fx_r_type = BFD_RELOC_MIPS_DVP_11_PCREL; } } else if ((operand->flags & DVP_OPERAND_DMA_ADDR) != 0 || (operand->flags & DVP_OPERAND_DMA_NEXT) != 0) { assert (operand->bits == 27 && operand->shift == 4); fixP->fx_r_type = BFD_RELOC_MIPS_DVP_27_S4; } else if ((operand->flags & DVP_OPERAND_RELOC_11_S4) != 0) { assert (operand->bits == 11 && operand->shift == 0); fixP->fx_r_type = BFD_RELOC_MIPS_DVP_11_S4; /* ??? bfd_install_relocation will duplicate what we've done to install the addend, so tell it not to. This is an instance where setting partial_inplace to true has some use. */ value = 0; } else if ((operand->flags & DVP_OPERAND_RELOC_U15_S3) != 0) { assert (operand->bits == 15 && operand->shift == 0); fixP->fx_r_type = BFD_RELOC_MIPS_DVP_U15_S3; /* ??? bfd_install_relocation will duplicate what we've done to install the addend, so tell it not to. This is an instance where setting partial_inplace to true has some use. */ value = 0; } else { as_bad_where (fixP->fx_file, fixP->fx_line, "unresolved expression that must be resolved"); fixP->fx_done = 1; return 1; } } else if (fixP->fx_done) { /* We're finished with this fixup. Install it because bfd_install_relocation won't be called to do it. */ switch (fixP->fx_r_type) { case BFD_RELOC_8: md_number_to_chars (where, value, 1); break; case BFD_RELOC_16: md_number_to_chars (where, value, 2); break; case BFD_RELOC_32: md_number_to_chars (where, value, 4); break; case BFD_RELOC_64: md_number_to_chars (where, value, 8); break; default: as_fatal ("internal error: unexpected fixup"); } } else { /* bfd_install_relocation will be called to finish things up. */ } /* Tuck `value' away for use by tc_gen_reloc. See the comment describing fx_addnumber in write.h. */ fixP->fx_addnumber = value; return 1; } /* Translate internal representation of relocation info to BFD target format. */ arelent * tc_gen_reloc (section, fixP) asection *section; fixS *fixP; { arelent *reloc; reloc = (arelent *) xmalloc (sizeof (arelent)); reloc->sym_ptr_ptr = &fixP->fx_addsy->bsym; reloc->address = fixP->fx_frag->fr_address + fixP->fx_where; reloc->howto = bfd_reloc_type_lookup (stdoutput, fixP->fx_r_type); if (reloc->howto == (reloc_howto_type *) NULL) { as_bad_where (fixP->fx_file, fixP->fx_line, "internal error: can't export reloc type %d (`%s')", fixP->fx_r_type, bfd_get_reloc_code_name (fixP->fx_r_type)); return NULL; } if (!fixP->fx_pcrel != !reloc->howto->pc_relative) { as_bad_where (fixP->fx_file, fixP->fx_line, fixP->fx_pcrel ? "PC-relative reloc not supported here" : "PC-relative reloc required here"); return NULL; } reloc->addend = fixP->fx_addnumber; return reloc; } /* Write a value out to the object file, using the appropriate endianness. */ void md_number_to_chars (buf, val, n) char *buf; valueT val; int n; { if (target_big_endian) number_to_chars_bigendian (buf, val, n); else number_to_chars_littleendian (buf, val, n); } /* Turn a string in input_line_pointer into a floating point constant of type type, and store the appropriate bytes in *litP. The number of LITTLENUMS emitted is stored in *sizeP . An error message is returned, or NULL on OK. */ /* Equal to MAX_PRECISION in atof-ieee.c */ #define MAX_LITTLENUMS 6 char * md_atof (type, litP, sizeP) char type; char *litP; int *sizeP; { int i,prec; LITTLENUM_TYPE words[MAX_LITTLENUMS]; LITTLENUM_TYPE *wordP; char *t; char *atof_ieee (); switch (type) { case 'f': case 'F': case 's': case 'S': prec = 2; break; case 'd': case 'D': case 'r': case 'R': prec = 4; break; /* FIXME: Some targets allow other format chars for bigger sizes here. */ default: *sizeP = 0; return "Bad call to md_atof()"; } t = atof_ieee (input_line_pointer, type, words); if (t) input_line_pointer = t; *sizeP = prec * sizeof (LITTLENUM_TYPE); if (target_big_endian) { for (i = 0; i < prec; i++) { md_number_to_chars (litP, (valueT) words[i], sizeof (LITTLENUM_TYPE)); litP += sizeof (LITTLENUM_TYPE); } } else { for (i = prec - 1; i >= 0; i--) { md_number_to_chars (litP, (valueT) words[i], sizeof (LITTLENUM_TYPE)); litP += sizeof (LITTLENUM_TYPE); } } return 0; } /* Miscellaneous utilities. */ /* Parse a 32 bit floating point number. The result is those 32 bits as an integer. */ static long parse_float (pstr, errmsg) char **pstr; const char **errmsg; { if ((*pstr)[0] == '0' && ((*pstr)[1] == 'x' || (*pstr)[1] == 'X')) { long value; (*pstr) += 2; value = strtoul (*pstr, pstr, 16); return value; } else { LITTLENUM_TYPE words[MAX_LITTLENUMS]; if ((*pstr)[0] == '0' && isalpha ((*pstr)[1])) (*pstr) += 2; *pstr = atof_ieee (*pstr, 'f', words); return (words[0] << 16) | words[1]; } } /* Scan a symbol and return a pointer to one past the end. */ #define issymchar(ch) (isalnum(ch) || ch == '_') static char * scan_symbol (sym) char *sym; { while (*sym && issymchar (*sym)) ++sym; return sym; } /* Evaluate an expression for an operand. The result is the value of the expression if it can be evaluated, or 0 if it cannot (say because some symbols haven't been defined yet) in which case a fixup is queued. If OPINDEX is 0, don't queue any fixups, just return 0. */ static long #ifdef USE_STDARG eval_expr (dvp_cpu cpu, int opindex, int offset, const char *fmt, ...) #else eval_expr (cpu, opindex, offset, fmt, va_alist) dvp_cpu cpu; int opindex,offset; const char *fmt; va_dcl #endif { long value; va_list ap; char *str,*save_input; expressionS exp; #ifdef USE_STDARG va_start (ap, fmt); #else va_start (ap); #endif vasprintf (&str, fmt, ap); va_end (ap); save_input = input_line_pointer; input_line_pointer = str; expression (&exp); input_line_pointer = save_input; free (str); if (exp.X_op == O_constant) value = exp.X_add_number; else { if (opindex != 0) { fixups[fixup_count].cpu = cpu; fixups[fixup_count].exp = exp; fixups[fixup_count].opindex = opindex; fixups[fixup_count].offset = offset; fixups[fixup_count].user_value = -1; fixups[fixup_count].wl = -1; fixups[fixup_count].cl = -1; ++fixup_count; } value = 0; } return value; } /* Create a label named by concatenating PREFIX to NAME. */ static symbolS * create_label (prefix, name) const char *prefix, *name; { int namelen = strlen (name); int prefixlen = strlen (prefix); char *fullname; symbolS *result; fullname = xmalloc (prefixlen + namelen + 1); strcpy (fullname, prefix); strcat (fullname, name); result = symbol_find_or_make (fullname); free (fullname); return result; } /* Create a label named by concatenating PREFIX to NAME, and define it as `.'. STO, if non-zero, is the st_other value to assign to this label. If STO is zero `cur_cpu', call force_mach_label to force record_mach to emit a cpu label. Otherwise the disassembler gets confused. */ static symbolS * create_colon_label (sto, prefix, name) int sto; const char *prefix, *name; { int namelen = strlen (name); int prefixlen = strlen (prefix); char *fullname; symbolS *result; fullname = xmalloc (prefixlen + namelen + 1); strcpy (fullname, prefix); strcat (fullname, name); result = colon (fullname); if (sto) S_SET_OTHER (result, sto); else force_mach_label (); free (fullname); return result; } /* Return a malloc'd string useful in creating unique labels. PREFIX is the prefix to use or NULL if we're to pick one. */ static char * unique_name (prefix) const char *prefix; { static int counter; char *result; if (prefix == NULL) prefix = UNIQUE_LABEL_PREFIX; asprintf (&result, "%s%d", prefix, counter); ++counter; return result; } /* VU support. */ /* Return the name of the overlay section. It must be unique among all overlays in the executable. */ static char * vuoverlay_section_name (addr) symbolS *addr; { char *section_name; char *file; unsigned int lineno; unsigned int fileno; /* One mpg may actually result in several, counter keeps track of this. */ static int counter; as_where (&file, &lineno); for (fileno = 0; *file; ++file) fileno = (fileno << 1) + *file; if (addr->sy_value.X_op == O_constant) asprintf (§ion_name, "%s.0x%x.%u.%u.%d", SHNAME_DVP_OVERLAY_PREFIX, (int) S_GET_VALUE (addr), fileno, lineno, counter); else asprintf (§ion_name, "%s.unknvma.%u.%u.%d", SHNAME_DVP_OVERLAY_PREFIX, fileno, lineno, counter); ++counter; return section_name; } /* Create a shadow section for VU code that starts at ADDR in vu space. START_LABEL and END_LABEL, if non-NULL, are symbols marking the start and end of the section. If NULL, no overlay tracking information is output. */ static void create_vuoverlay_section (section_name, addr, start_label, end_label) const char *section_name; /* Remember, expressions are recorded as symbols. */ symbolS *addr; symbolS *start_label, *end_label; { /* Must preserve the current seg/subseg. */ segT orig_seg = now_seg; subsegT orig_subseg = now_subseg; /* Create and get handle of a vu overlay section. All vu symbols go here. The section name must be unique in the entire executable. We achieve this by encoding the source file name and file number. Ick. ??? A cleaner way would be if mpg took a new argument that named the overlay. */ vuoverlay_section = subseg_new (section_name, 0); bfd_set_section_flags (stdoutput, vuoverlay_section, SEC_CODE); /* There's no point in setting the section vma as we can't get the linker to preserve it. But what the heck ... It might be useful to the objdump user. */ #if 0 /* FIXME: bfd's elf.c:swap_out_syms always emits symbol values with the section vma added in so we can't do this. */ if (addr->sy_value.X_op == O_constant) bfd_set_section_vma (stdoutput, vuoverlay_section, S_GET_VALUE (addr)); #endif #if 1 /* Create a symbol marking the start of the section. This is different than START_LABEL as this one is for gdb. It needs a symbol to start a section so we give it one. This one could be combined with START_LABEL, but I haven't since they serve different purposes. */ { symbolS * gdb_start_sym; gdb_start_sym = create_colon_label (STO_DVP_VU, VUOVERLAY_START_PREFIX, section_name); gdb_start_sym->sy_value = addr->sy_value; } #endif /* The size of the section won't be known until we see the .endmpg, but we can compute it from the start and end labels. */ /* FIXME: This causes the section to occupy space in the file. */ if (start_label) frag_var (rs_space, 1, 1, (relax_substateT) 0, expr_build_binary (O_subtract, end_label, start_label), (offsetT) 0, (char *) 0); #if 0 /* already done */ /* Initialize $.mpgloc. */ mpgloc_sym = expr_build_uconstant (addr); S_SET_OTHER (mpgloc_sym, STO_DVP_VU); #endif #if 0 /* $.mpgloc is kept in the ABS section. */ S_SET_SEGMENT (mpgloc_sym, vuoverlay_section); #endif /* Add an entry to the vu overlay table. */ if (start_label) { expressionS exp; const char *p; symbolS * name_label; /* Put the section name in the overlay string table. */ subseg_set (vuoverlay_string_section, 0); name_label = create_colon_label (0, LOCAL_LABEL_PREFIX, unique_name ("secstr")); /* FIXME: should be a utility to do this. */ for (p = section_name; *p; ++p) FRAG_APPEND_1_CHAR (*p); FRAG_APPEND_1_CHAR (0); subseg_set (vuoverlay_table_section, 0); /* FIXME: should be a utility to do these. */ /* Offset into string table. */ exp.X_op = O_symbol; exp.X_add_symbol = name_label; exp.X_add_number = 0; emit_expr (&exp, 4); /* The section's lma. */ exp.X_op = O_symbol; exp.X_add_symbol = start_label; exp.X_add_number = 0; emit_expr (&exp, 4); /* The section's vma. */ exp.X_op = O_symbol; exp.X_add_symbol = addr; exp.X_add_number = 0; emit_expr (&exp, 4); } /* Restore the original seg/subseg. */ subseg_set (orig_seg, orig_subseg); } /* Compute a value for $.mpgloc given a symbol at the start of a chunk of code, the $.mpgloc value for the start, and a symbol at the end of the chunk of code. */ static symbolS * compute_mpgloc (startloc, startsym, endsym) symbolS * startloc; symbolS * startsym; symbolS * endsym; { symbolS *s; s = expr_build_binary (O_subtract, endsym, startsym); s = expr_build_binary (O_add, startloc, s); return s; } /* Compute a value for nloop. */ static int compute_nloop (type, nregs, bytes) gif_type type; int nregs, bytes; { int computed_nloop; switch (type) { case GIF_PACKED : /* We can't compute a value if no regs were specified and there is a non-zero amount of data. Just set to something useful, a warning will be issued later. */ if (nregs == 0) nregs = 1; computed_nloop = (bytes >> 4) / nregs; break; case GIF_REGLIST : if (nregs == 0) nregs = 1; computed_nloop = (bytes >> 3) / nregs; break; case GIF_IMAGE : computed_nloop = bytes >> 4; break; } return computed_nloop; } /* Issue a warning if the user specified nloop value doesn't match the computed value. */ static void check_nloop (type, nregs, user_nloop, computed_nloop, file, line) gif_type type; int nregs,user_nloop,computed_nloop; char *file; unsigned int line; { if (user_nloop != computed_nloop) as_warn_where (file, line, "nloop value does not match amount of data"); } /* Compute the auto-count value for a DMA tag. INLINE_P is non-zero if the dma data is inline. */ static void setup_dma_autocount (name, insn_buf, inline_p) const char *name; DVP_INSN *insn_buf; int inline_p; { long count; if (inline_p) { /* -1: The count is the number of following quadwords, so skip the one containing the dma tag. */ count = eval_expr (DVP_DMA, dma_operand_count, 0, "((%s%s - %s) >> 4) - 1", END_LABEL_PREFIX, name, name); } else { /* We don't want to subtract 1 here as the begin and end labels properly surround the data we want to compute the length of. */ count = eval_expr (DVP_DMA, dma_operand_count, 0, "(%s%s - %s) >> 4", END_LABEL_PREFIX, name, name); } /* Store the count field. */ insn_buf[0] &= 0xffff0000; insn_buf[0] |= count & 0x0000ffff; } /* Record that inline data follows. */ static void inline_dma_data (autocount_p, insn_buf) int autocount_p; DVP_INSN *insn_buf; { if (dma_data_state != 0 ) { as_bad ("DmaData blocks cannot be nested."); return; } dma_data_state = 1; if (autocount_p) { dma_data_name = S_GET_NAME (create_colon_label (0, "", unique_name (NULL))); setup_dma_autocount (dma_data_name, insn_buf, 1); } else dma_data_name = 0; } /* Compute the auto-count value for a DMA tag with out-of-line data. */ static long parse_dma_addr_autocount (opcode, operand, mods, insn_buf, pstr, errmsg) const dvp_opcode *opcode; const dvp_operand *operand; int mods; DVP_INSN *insn_buf; char **pstr; const char **errmsg; { char *start = *pstr; char *end = start; long retval; /* Data reference must be a .DmaData label. */ symbolS *label, *label2, *endlabel; const char *name; char c; label = label2 = 0; if (! is_name_beginner (*start)) { *errmsg = "invalid .DmaData label"; return 0; } name = start; end = scan_symbol (name); c = *end; *end = 0; label = symbol_find_or_make (name); *end = c; /* Use the same prefix as vu labels here. */ label2 = create_label (VU_LABEL_PREFIX, name); endlabel = create_label (END_LABEL_PREFIX, name); retval = eval_expr (DVP_DMA, dma_operand_addr, 4, name); setup_dma_autocount (name, insn_buf, 0); *pstr = end; return retval; } /* Compute the type of vif insn of IBYTE. IBYTE is the msb of the insn. This is only used for mpg,direct,unpack insns. The result is one of VIF_OPCODE_{DIRECT,DIRECTHL,MPG,UNPACK}. */ static int vif_insn_type (ibyte) char ibyte; { switch (ibyte & 0x70) { case 0x50 : return (ibyte & 1) ? VIF_OPCODE_DIRECTHL : VIF_OPCODE_DIRECT; case 0x40 : return VIF_OPCODE_MPG; case 0x60 : case 0x70 : return VIF_OPCODE_UNPACK; default : as_fatal ("internal error: bad call to vif_insn_type"); } } /* Return the length value to insert in a VIF instruction whose upper byte is IBYTE and whose data length is BYTES. WL,CL are used for unpack insns and are the stcycl values in effect. This does not do the max -> 0 conversion. */ static int vif_length_value (ibyte, wl, cl, bytes) char ibyte; int wl,cl; int bytes; { switch (ibyte & 0x70) { case 0x50 : /* direct */ /* ??? Worry about data /= 16 cuts off? */ return bytes / 16; case 0x40 : /* mpg */ /* ??? Worry about data /= 8 cuts off? */ return bytes / 8; case 0x60 : /* unpack */ case 0x70 : return vif_unpack_len_value (ibyte & 15, wl, cl, bytes); default : as_fatal ("internal error: bad call to vif_length_value"); } } /* Install length LEN in the vif insn at BUF. LEN is the actual value to store, except that the max->0 conversion hasn't been done (we do it). The bytes in BUF are in target order. */ static void install_vif_length (buf, len) char *buf; int len; { unsigned char ibyte = buf[3]; if ((ibyte & 0x70) == 0x40) { /* mpg */ if (len > 256) as_bad ("`mpg' data length must be between 1 and 256"); buf[2] = len == 256 ? 0 : len; } else if ((ibyte & 0x70) == 0x50) { /* direct/directhl */ if (len > 65536) as_bad ("`direct' data length must be between 1 and 65536"); len = len == 65536 ? 0 : len; buf[0] = len; buf[1] = len >> 8; } else if ((ibyte & 0x60) == 0x60) { /* unpack */ /* len == -1 means wl,cl are unknown and thus we can't compute a useful value */ if (len == -1) { as_bad ("missing `stcycle', can't compute length of `unpack' insn"); len = 1; } if (len < 0 || len > 256) as_bad ("`unpack' data length must be between 0 and 256"); /* 256 is recorded as 0 in the insn */ len = len == 256 ? 0 : len; buf[2] = len; } else as_fatal ("internal error: bad call to install_vif_length"); } /* Finish off the current set of mpg insns, and start a new set. The IGNORE arg exists because insert_unpack_marker uses it and both of these functions are passed to insert_file. */ static void insert_mpg_marker (ignore) unsigned long ignore; { s_endmpg (ENDMPG_MIDDLE); /* mpgloc is updated by s_endmpg. */ md_assemble ("mpg *,*"); /* Record the cpu type in case we're in the middle of reading binary data. */ record_mach (DVP_VUUP, 0); /* We need a stabs line number entry at the start of the vu code. This has already been called, but too early and we can't stop that. So just emit another. */ generate_lineno_debug (); } /* Finish off the current unpack insn and start a new one. INSN0 is the first word of the insn and is used to figure out what kind of unpack insn it is. */ static void insert_unpack_marker (insn0) unsigned long insn0; { } /* Insert a file into the output. The -I arg passed to GAS is used to specify where to find the file. INSERT_MARKER if non-NULL is called every SIZE bytes with an argument of INSERT_MARKER_ARG. This is used by the mpg insn to insert mpg's every 256 insns and by the unpack insn. The result is the number of bytes inserted. If an error occurs an error message is printed and zero is returned. */ static int insert_file (file, insert_marker, insert_marker_arg, size) const char *file; void (*insert_marker) PARAMS ((unsigned long)); unsigned long insert_marker_arg; int size; { FILE *f; char buf[256]; int i, n, total, left_before_marker; char *path; path = xmalloc (strlen (file) + include_dir_maxlen + 5 /*slop*/); f = NULL; for (i = 0; i < include_dir_count; i++) { strcpy (path, include_dirs[i]); strcat (path, "/"); strcat (path, file); if ((f = fopen (path, FOPEN_RB)) != NULL) break; } free (path); if (f == NULL) f = fopen (file, FOPEN_RB); if (f == NULL) { as_bad ("unable to read file `%s'", file); return 0; } total = 0; left_before_marker = 0; do { int bytes; if (insert_marker) bytes = MIN (size - left_before_marker, sizeof (buf)); else bytes = sizeof (buf); n = fread (buf, 1, bytes, f); if (n > 0) { char *fr = frag_more (n); memcpy (fr, buf, n); total += n; if (insert_marker) { left_before_marker += n; if (left_before_marker > size) as_fatal ("internal error: file insertion sanity checky failed"); if (left_before_marker == size) { (*insert_marker) (insert_marker_arg); left_before_marker = 0; } } } } while (n > 0); fclose (f); /* We assume the file is smaller than 2^31 bytes. Ok, we shouldn't make any assumptions. */ return total; } /* Insert an operand value into an instruction. */ static void insert_operand (cpu, opcode, operand, mods, insn_buf, val, errmsg) dvp_cpu cpu; const dvp_opcode *opcode; const dvp_operand *operand; int mods; DVP_INSN *insn_buf; offsetT val; const char **errmsg; { if (operand->insert) { (*operand->insert) (opcode, operand, mods, insn_buf, (long) val, errmsg); } else { /* We currently assume a field does not cross a word boundary. */ int shift = ((mods & DVP_MOD_THIS_WORD) ? (operand->shift & 31) : operand->shift); /* FIXME: revisit */ if (operand->word == 0) { int word = (mods & DVP_MOD_THIS_WORD) ? 0 : (shift / 32); if (operand->bits == 32) insn_buf[word] = val; else { shift = shift % 32; insn_buf[word] |= ((long) val & ((1 << operand->bits) - 1)) << shift; } } else { int word = (mods & DVP_MOD_THIS_WORD) ? 0 : operand->word; if (operand->bits == 32) insn_buf[word] = val; else { long temp = (long) val & ((1 << operand->bits) - 1); insn_buf[word] |= temp << operand->shift; } } } } /* Insert an operand's final value into an instruction. Here we can give warning messages about operand values if we want to. */ static void insert_operand_final (cpu, operand, mods, insn_buf, val, file, line) dvp_cpu cpu; const dvp_operand *operand; int mods; DVP_INSN *insn_buf; offsetT val; char *file; unsigned int line; { if (operand->bits != 32) { offsetT min, max, test; /* ??? This test belongs more properly in the insert handler. */ if ((operand->flags & DVP_OPERAND_RELATIVE_BRANCH) != 0) { if ((val & 7) != 0) { if (file == (char *) NULL) as_warn ("branch to misaligned address"); else as_warn_where (file, line, "branch to misaligned address"); } val >>= 3; } /* ??? This test belongs more properly in the insert handler. */ else if ((operand->flags & DVP_OPERAND_VU_ADDRESS) != 0) { if ((val & 7) != 0) { if (file == (char *) NULL) as_warn ("misaligned vu address"); else as_warn_where (file, line, "misaligned vu address"); } val >>= 3; } if ((operand->flags & DVP_OPERAND_SIGNED) != 0) { if ((operand->flags & DVP_OPERAND_SIGNOPT) != 0) max = (1 << operand->bits) - 1; else max = (1 << (operand->bits - 1)) - 1; min = - (1 << (operand->bits - 1)); } else { max = (1 << operand->bits) - 1; min = 0; } if ((operand->flags & DVP_OPERAND_NEGATIVE) != 0) test = - val; else test = val; if (test < (offsetT) min || test > (offsetT) max) { const char *err = "operand out of range (%s not between %ld and %ld)"; char buf[100]; sprint_value (buf, test); if (file == (char *) NULL) as_warn (err, buf, min, max); else as_warn_where (file, line, err, buf, min, max); } } { const char *errmsg = NULL; insert_operand (cpu, NULL, operand, mods, insn_buf, val, &errmsg); if (errmsg != NULL) as_warn_where (file, line, errmsg); } } /* DVP pseudo ops. */ static void s_dmadata (ignore) int ignore; { char *name, c; dma_data_name = 0; if (dma_data_state != 0) { as_bad ("DmaData blocks cannot be nested."); ignore_rest_of_line (); return; } dma_data_state = 1; SKIP_WHITESPACE (); /* Leading whitespace is part of operand. */ name = input_line_pointer; if (!is_name_beginner (*name)) { as_bad ("invalid identifier for \".DmaData\""); ignore_rest_of_line (); return; } /* Do an implicit alignment to a 16 byte boundary. */ frag_align (4, 0, 0); record_alignment (now_seg, 4); c = get_symbol_end (); line_label = colon (name); /* user-defined label */ dma_data_name = S_GET_NAME (line_label); *input_line_pointer = c; /* Force emission of a machine type label for the next insn. */ force_mach_label (); demand_empty_rest_of_line (); } static void s_enddmadata (ignore) int ignore; { if (dma_data_state != 1) { as_warn (".EndDmaData encountered outside a DmaData block -- ignored."); ignore_rest_of_line (); dma_data_name = 0; } dma_data_state = 0; demand_empty_rest_of_line (); /* If count provided, verify it is correct. */ /* ... */ /* Fill the data out to a multiple of 16 bytes. */ /* FIXME: Are the fill contents right? */ frag_align (4, 0, 0); /* "label" points to beginning of block. Create a name for the final label like _$. */ if (dma_data_name) create_colon_label (0, END_LABEL_PREFIX, dma_data_name); } static void s_dmapackvif (ignore) int ignore; { /* Syntax: .dmapackvif 0|1 */ /* Leading whitespace is part of operand. */ SKIP_WHITESPACE (); switch (*input_line_pointer++) { case '0': dma_pack_vif_p = 0; break; case '1': dma_pack_vif_p = 1; break; default: as_bad ("illegal argument to `.dmapackvif'"); } demand_empty_rest_of_line (); } /* INTERNAL_P is non-zero if invoked internally by this file rather than by the user. In this case we don't touch the input stream. */ static void s_enddirect (internal_p) int internal_p; { if (CUR_ASM_STATE != ASM_DIRECT) { as_bad ("`.enddirect' has no matching `direct' instruction"); return; } /* Record in the end data symbol the current location. */ if (now_seg != S_GET_SEGMENT (vif_data_end)) as_bad (".enddirect in different section"); vif_data_end->sy_frag = frag_now; S_SET_VALUE (vif_data_end, (valueT) frag_now_fix ()); pop_asm_state (1); /* Needn't be reset, but to catch bugs it is. */ vif_data_end = NULL; if (! internal_p) demand_empty_rest_of_line (); } /* CALLER denotes who's calling us. If ENDMPG_USER then .endmpg was found in the input stream. If ENDMPG_INTERNAL then we've been invoked to finish off file insertion. If ENDMPG_MIDDLE then we've been invoked in the middle of a long stretch of vu code. */ static void s_endmpg (caller) int caller; { if (CUR_ASM_STATE != ASM_MPG) { as_bad ("`.endmpg' has no matching `mpg' instruction"); return; } /* Record in the end data symbol the current location. */ if (now_seg != S_GET_SEGMENT (vif_data_end)) as_bad (".endmpg in different section"); vif_data_end->sy_frag = frag_now; S_SET_VALUE (vif_data_end, (valueT) frag_now_fix ()); /* Update $.mpgloc. We have to leave the old value alone as it may be used in fixups already recorded. Since compute_mpgloc allocates a new symbol for the result we're ok. The new value is the old value plus the number of double words in this chunk. */ mpgloc_sym = compute_mpgloc (mpgloc_sym, vif_data_start, vif_data_end); S_SET_OTHER (mpgloc_sym, STO_DVP_VU); pop_asm_state (1); /* Needn't be reset, but to catch bugs it is. */ vif_data_end = NULL; /* Reset the vu insn counter. */ if (caller != ENDMPG_MIDDLE) vu_count = -1; if (caller == ENDMPG_USER) demand_empty_rest_of_line (); } /* INTERNAL_P is non-zero if invoked internally by this file rather than by the user. In this case we don't touch the input stream. */ static void s_endunpack (internal_p) int internal_p; { if (CUR_ASM_STATE != ASM_UNPACK) { as_bad ("`.endunpack' has no matching `unpack' instruction"); return; } /* Record in the end data symbol the current location. */ /* ??? $.unpackloc is gone. Is this also used for data length verification? */ if (now_seg != S_GET_SEGMENT (vif_data_end)) as_bad (".endunpack in different section"); vif_data_end->sy_frag = frag_now; S_SET_VALUE (vif_data_end, (valueT) frag_now_fix ()); /* Round up to next word boundary. */ frag_align (2, 0, 0); pop_asm_state (1); /* Needn't be reset, but to catch bugs it is. */ vif_data_end = NULL; if (! internal_p) demand_empty_rest_of_line (); } static void s_endgif (ignore) int ignore; { int bytes; int specified_nloop = gif_nloop (); int computed_nloop; int nregs = gif_nregs (); char *file; unsigned int line; as_where (&file, &line); if (CUR_ASM_STATE != ASM_GIF) { as_bad (".endgif doesn't follow a gif tag"); return; } pop_asm_state (1); /* Fill out to proper boundary. ??? This may cause eval_expr to always queue a fixup. So be it. */ switch (gif_insn_type) { case GIF_PACKED : frag_align (4, 0, 0); break; case GIF_REGLIST : frag_align (3, 0, 0); break; case GIF_IMAGE : frag_align (4, 0, 0); break; } /* The -16 is because the `gif_data_name' label is emitted at the start of the gif tag. If we're in a different frag from the one we started with, this can't be computed until much later. To cope we queue a fixup and deal with it then. ??? The other way to handle this is by having expr() compute "syma - symb" when they're in different fragments but the difference is constant. Not sure how much of a slowdown that will introduce though. */ fixup_count = 0; bytes = eval_expr (DVP_GIF, gif_operand_nloop, 0, ". - %s - 16", gif_data_name); /* Compute a value for nloop if we can. */ if (fixup_count == 0) { computed_nloop = compute_nloop (gif_insn_type, nregs, bytes); /* If the user specified nloop, verify it. */ if (specified_nloop != -1) check_nloop (gif_insn_type, nregs, specified_nloop, computed_nloop, file, line); } /* If computation of nloop can't be done yet, queue a fixup and do it later. Otherwise validate nloop if specified or write the computed value into the insn. */ if (fixup_count != 0) { /* FIXME: It might eventually be possible to combine all the various copies of this bit of code. */ int op_type, reloc_type, offset; const dvp_operand *operand; fixS *fix; op_type = fixups[0].opindex; offset = fixups[0].offset; reloc_type = encode_fixup_reloc_type (DVP_GIF, op_type); operand = &gif_operands[op_type]; fix = fix_new_exp (gif_insn_frag, (gif_insn_frag_loc + offset - gif_insn_frag->fr_literal), 4, &fixups[0].exp, 0, (bfd_reloc_code_real_type) reloc_type); /* Record user specified value so we can test it when we compute the actual value. */ fix->tc_fix_data.type = gif_insn_type; fix->tc_fix_data.nregs = nregs; fix->tc_fix_data.user_value = specified_nloop; } else if (specified_nloop != -1) ; /* nothing to do */ else { DVP_INSN insn = bfd_getl32 (gif_insn_frag_loc); insert_operand_final (DVP_GIF, &gif_operands[gif_operand_nloop], DVP_MOD_THIS_WORD, &insn, (offsetT) computed_nloop, file, line); bfd_putl32 ((bfd_vma) insn, gif_insn_frag_loc); } /* These needn't be reset, but to catch bugs they are. */ gif_data_name = NULL; gif_insn_frag = NULL; gif_insn_frag_loc = NULL; demand_empty_rest_of_line (); } static void s_vu (ignore) int ignore; { /* If in MPG state and the user requests to change to VU state, leave the state as MPG. This happens when we see an mpg followed by a .include that has .vu. Note that no attempt is made to support an include depth > 1 for this case. */ if (CUR_ASM_STATE == ASM_MPG) return; /* We need to set up things for $.mpgloc calculations. */ /* FIXME: May need to check that we're not clobbering currently in use versions of these. Also need to worry about which section the .vu is issued in. On the other hand, ".vu" isn't intended to be supported everywhere. */ vif_data_start = expr_build_dot (); mpgloc_sym = expr_build_uconstant (0); S_SET_OTHER (mpgloc_sym, STO_DVP_VU); #if 0 /* ??? wip */ create_vuoverlay_section (vuoverlay_section_name (NULL), mpgloc_sym, NULL, NULL); #endif set_asm_state (ASM_VU, ".vu"); demand_empty_rest_of_line (); } /* Same as read.c:s_func except prepend VU_LABEL_PREFIX by default. */ static void s_dvp_func (end_p) int end_p; { do_s_func (end_p, VU_LABEL_PREFIX); }