start-sanitize-am33 Wed Jul 8 16:29:12 1998 Jeffrey A Law (law@cygnus.com) * am33.igen: More am33 instructions. Fix "div". Mon Jul 6 15:39:22 1998 Jeffrey A Law (law@cygnus.com) * mn10300.igen: Add am33 support. * Makefile.in: Use multi-sim to support both a mn10300 and am33 simulator. * am33.igen: Add many more am33 instructions. end-sanitize-am33 Wed Jul 1 17:07:09 1998 Jeffrey A Law (law@cygnus.com) * mn10300_sim.h (FETCH24): Define. start-sanitize-am33 * mn10300_sim.h: Add defines for some registers found on the AM33. * am33.igen: New file with some am33 support. end-sanitize-am33 Tue Jun 30 11:23:20 1998 Jeffrey A Law (law@cygnus.com) * mn10300_sim.h: Include bfd.h (struct state): Add more room for processor specific registers. start-sanitize-am33 (REG_E0): Define. end-sanitize-am33 start-sanitize-am30 Thu Jun 25 10:12:03 1998 Joyce Janczyn * dv-mn103tim.c: Include sim-assert.h * dv-mn103ser.c (do_polling_event): Check for incoming data on serial line and schedule next polling event. (read_status_reg): schedule events to check for incoming data on serial line and issue interrupt if necessary. Fri Jun 19 16:47:27 1998 Joyce Janczyn * interp.c (sim_open): hook up serial 1 and 2 ports properly (typo). Fri Jun 19 11:59:26 1998 Joyce Janczyn * interp.c (board): Rename am32 to stdeval1 as this is the name consistently used to refer to the mn1030002 board. Thu June 18 14:37:14 1998 Joyce Janczyn * interp.c (sim_open): Fix typo in address of EXTMD register (0x34000280, not 0x3400280). end-sanitize-am30 Wed Jun 17 18:00:18 1998 Jeffrey A Law (law@cygnus.com) * simops.c (syscall): Handle change in opcode # for syscall. * mn10300.igen (syscall): Likewise. start-sanitize-am30 Tue June 16 09:36:21 1998 Joyce Janczyn * dv-mn103int.c (mn103int_finish): Regular interrupts (not NMI or reset) are not enabled on reset. Sun June 14 17:04:00 1998 Joyce Janczyn * dv-mn103iop.c (write_*_reg): Check for attempt to write r/o register bits. * dv-mn103ser.c: Fill in methods for reading and writing to serial device registers. * interp.c (sim_open): Make the serial device a polling device. Fri June 12 16:24:00 1998 Joyce Janczyn * dv-mn103iop.c: New file for handling am32 io ports. * configure.in: Add mn103iop to hw_device list. * configure: Re-generate. * interp.c (sim_open): Create io port device. Wed June 10 14:34:00 1998 Joyce Janczyn * dv-mn103int.c (external_group): Use enumerated types to access correct group addresses. * dv-mn103tim.c (do_counter_event): Underflow of cascaded timer triggers an interrupt on the higher-numbered timer's port. end-sanitize-am30 Mon June 8 13:30:00 1998 Joyce Janczyn * interp.c: (mn10300_option_handler): New function parses arguments using sim-options. start-sanitize-am30 * (board): Add --board option for specifying am32. * (sim_open): Create new timer and serial devices and control configuration of other am32 devices via board option. * dv-mn103tim.c, dv-mn103ser.c: New files for timers and serial devices. * dv-mn103cpu.c: Fix typos in opening comments. * dv-mn103int.c: Adjust interrupt controller settings for am32 instead of am30. * configure.in: Add mn103tim and mn103ser to hw_device list. * configure: Re-generate. end-sanitize-am30 start-sanitize-am30 Mon May 25 20:50:35 1998 Andrew Cagney * dv-mn103int.c, dv-mn103cpu.c: Rename *_callback to *_method. * dv-mn103cpu.c, dv-mn103int.c: Include hw-main.h and sim-main.h. Declare a struct hw_descriptor instead of struct hw_device_descriptor. Mon May 25 17:33:33 1998 Andrew Cagney * dv-mn103cpu.c (struct mn103cpu): Change type of pending_handler to struct hw_event. Fri May 22 12:17:41 1998 Andrew Cagney * configure.in (SIM_AC_OPTION_HARDWARE): Add argument "yes". Wed May 6 13:29:06 1998 Andrew Cagney * interp.c (sim_open): Create a polling PAL device. end-sanitize-am30 Fri May 1 16:39:15 1998 Andrew Cagney * dv-mn103int.c (mn103int_port_event): (mn103int_port_event): (mn103int_io_read_buffer): (mn103int_io_write_buffer): * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Drop CPU/CIA args. (mn103cpu_port_event): Ditto. (mn103cpu_io_read_buffer): Ditto. (mn103cpu_io_write_buffer): Ditto. Tue Apr 28 18:33:31 1998 Geoffrey Noer * configure: Regenerated to track ../common/aclocal.m4 changes. Sun Apr 26 15:31:55 1998 Tom Tromey * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Sun Apr 26 15:19:55 1998 Tom Tromey * acconfig.h: New file. * configure.in: Reverted change of Apr 24; use sinclude again. Fri Apr 24 14:16:40 1998 Tom Tromey * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Fri Apr 24 11:19:07 1998 Tom Tromey * configure.in: Don't call sinclude. Tue Apr 14 10:03:02 1998 Andrew Cagney * mn10300_sim.h: Declare all functions in op_utils.c using INLINE_SIM_MAIN. * op_utils.c: Ditto. * sim-main.c: New file. Include op_utils.c. * mn10300.igen (mov, cmp): Use new igen operators `!' and `=' to differentiate between MOV/CMP immediate/register instructions. * configure.in (SIM_AC_OPTION_INLINE): Add and enable. * configure: Regenerate. Sat Apr 4 20:36:25 1998 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. start-sanitize-am30 Fri Mar 27 16:15:52 1998 Andrew Cagney * interp.c (hw): Delete variable, moved to SIM_DESC. (sim_open): Delete calls to hw_tree_create, hw_tree_finish. Handled by sim-module. (sim_open): Do not anotate tree with trace properties, handled by sim-hw.c (sim_open): Call sim_hw_parse instead of hw_tree_parse. * configure: Regenerated to track ../common/aclocal.m4 changes. end-sanitize-am30 start-sanitize-am30 Thu Mar 26 20:46:18 1998 Stu Grossman * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Save the entire PC on the stack when delivering interrupts (not just the lower half)... * mn10300.igen (mov (Di,Am),Dn): Fix decode. Registers were specified in the wrong order. end-sanitize-am30 start-sanitize-am30 Fri Mar 27 00:56:40 1998 Andrew Cagney * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Stop loss of succeeding interrupts, clear pending_handler when the handler isn't re-scheduled. end-sanitize-am30 Thu Mar 26 10:11:01 1998 Stu Grossman * Makefile.in (tmp-igen): Prefix all usage of move-if-change script with $(SHELL) to make NT native builds happy. * configure: Regenerate because of change to ../common/aclocal.m4. Thu Mar 26 11:22:31 1998 Andrew Cagney * configure.in: Make --enable-sim-common the default. * configure: Re-generate. * sim-main.h (CIA_GET, CIA_SET): Save/restore current instruction address into Sate.regs[REG_PC] instead of common struct. Wed Mar 25 17:42:00 1998 Joyce Janczyn * mn10300.igen (cmp imm8,An): Do not sign extend imm8 value. Wed Mar 25 12:08:00 1998 Joyce Janczyn * simops.c (OP_F0FD): Initialise variable 'sp'. start-sanitize-am30 Thu Mar 26 00:21:32 1998 Andrew Cagney * dv-mn103int.c (decode_group): A group register every 4 bytes not 8. (write_icr): Rewrite equation updating request field. (read_iagr): Fix check that interrupt is still pending. end-sanitize-am30 start-sanitize-am30 Wed Mar 25 16:14:50 1998 Andrew Cagney * interp.c (sim_open): Tidy up device creation. * dv-mn103int.c (mn103int_port_event): Drive NMI with non-zero value. (mn103int_io_read_buffer): Convert absolute address to register block offsets. (read_icr, write_icr): Convert block offset into group offset. end-sanitize-am30 Wed Mar 25 15:08:49 1998 Andrew Cagney * interp.c (sim_open): Create second 1mb memory region at 0x40000000. (sim_open): Create a device tree. (sim-hw.h): Include. start-sanitize-am30 (do_interrupt): Delete, needs to use dv-mn103cpu.c * dv-mn103int.c, dv-mn103cpu.c: New files. end-sanitize-am30 Wed Mar 25 08:47:38 1998 Andrew Cagney * mn10300_sim.h (EXTRACT_PSW_LM, INSERT_PSW_LM, PSW_IE, PSW_LM): Define. (SP): Define. Wed Mar 25 12:35:29 1998 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Wed Mar 25 10:24:48 1998 Andrew Cagney * interp.c (sim-options.h): Include. (sim_kind, myname): Declare when not using common framework. * mn10300_sim.h (do_syscall, generic*): Provide prototypes for functions found in op_utils.c * mn10300.igen (add): Discard unused variables. * configure, config.in: Re-generate with autoconf 2.12.1. Tue Mar 24 15:27:00 1998 Joyce Janczyn Add support for --enable-sim-common option. * Makefile.in (WITHOUT_COMMON_OBJS): Files included if ! --enable-sim-common (WITH_COMMON_OBJS): Files included if --enable-sim-common. (MN10300_OBJS,MN10300_INTERP_DEP): New variables. (SIM_OBJS): Rewrite. ({WITHOUT,WITH}_COMMON_RUN_OBJS,SIM_RUN_OBJS): New variables. (SIM_EXTRA_CFLAGS): New variable. (clean-extra): Clean up igen files. (../igen/igen,clean-igen,tmp-igen): New rules. * configure.in: Add support for common framework via --enable-sim-common. * configure: Regenerate. * interp.c: #include sim-main if WITH_COMMON, not mn10300_sim.h. (hash,dispatch,sim_size): Don't compile if ! WITH_COMMON. (init_system,sim_write,compare_simops): Likewise. (sim_set_profile,sim_set_profile_size): Likewise. (sim_stop,sim_resume,sim_trace,sim_info): Likewise. (sim_set_callbacks,sim_stop_reason,sim_read,sim_load): Likewise. (enum interrupt_type): New enum. (interrupt_names): New global. (do_interrupt): New function. (sim_open): Define differently if WITH_COMMON. (sim_close,sim_create_inferior,sim_do_command): Likewise. * mn10300_sim.h ({load,store}_{byte,half,word}): Define versions for WITH_COMMON. * mn10300.igen: New file. * mn10300.dc: New file. * op_utils.c: New file. * sim-main.h: New file. Wed Mar 18 12:38:12 1998 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Fri Feb 27 18:36:04 1998 Jeffrey A Law (law@cygnus.com) * simops.c (inc): Fix typo. Wed Feb 25 01:59:29 1998 Jeffrey A Law (law@cygnus.com) * simops.c (signed multiply instructions): Cast input operands to signed32 before casting them to signed64 so that the sign bit is propagated properly. Mon Feb 23 20:23:19 1998 Mark Alexander * Makefile.in: Last change was bad. Define NL_TARGET so that targ-vals.h will be used instead of syscall.h. * simops.c: Use targ-vals.h instead of syscall.h. (OP_F020): Disable unsupported system calls. Mon Feb 23 09:44:38 1998 Mark Alexander * Makefile.in: Get header files from libgloss/mn10300/sys. Sun Feb 22 16:02:24 1998 Jeffrey A Law (law@cygnus.com) * simops.c: Include sim-types.h. Wed Feb 18 13:07:08 1998 Jeffrey A Law (law@cygnus.com) * simops.c (multiply instructions): Cast input operands to a signed64/unsigned64 type as appropriate. Tue Feb 17 12:47:16 1998 Andrew Cagney * interp.c (sim_store_register, sim_fetch_register): Pass in length parameter. Return -1. Sun Feb 1 16:47:51 1998 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Sat Jan 31 18:15:41 1998 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Mon Jan 19 22:26:29 1998 Doug Evans * configure: Regenerated to track ../common/aclocal.m4 changes. Mon Dec 15 23:17:11 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Thu Dec 4 09:21:05 1997 Doug Evans * configure: Regenerated to track ../common/aclocal.m4 changes. Tue Nov 11 10:38:52 1997 Jeffrey A Law (law@cygnus.com) * simops.c (call:16 call:32): Stack adjustment is determined solely by the imm8 field. Wed Oct 22 14:43:00 1997 Andrew Cagney * interp.c (sim_load): Pass lma_p and sim_write args to sim_load_file. Tue Oct 21 10:12:03 1997 Jeffrey A Law (law@cygnus.com) * simops.c: Correctly handle register restores for "ret" and "retf" instructions. Fri Oct 3 09:28:00 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Wed Sep 24 17:38:57 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Tue Sep 23 11:04:38 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Mon Sep 22 11:46:20 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Fri Sep 19 17:45:25 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Mon Sep 15 17:36:15 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Thu Sep 4 17:21:23 1997 Doug Evans * configure: Regenerated to track ../common/aclocal.m4 changes. Wed Aug 27 18:13:22 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Tue Aug 26 10:41:07 1997 Andrew Cagney * interp.c (sim_kill): Delete. (sim_create_inferior): Add ABFD argument. (sim_load): Move setting of PC from here. (sim_create_inferior): To here. Mon Aug 25 17:50:22 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Mon Aug 25 16:14:44 1997 Andrew Cagney * interp.c (sim_open): Add ABFD argument. Tue Jun 24 13:46:20 1997 Jeffrey A Law (law@cygnus.com) * interp.c (sim_resume): Clear State.exited. (sim_stop_reason): If State.exited is nonzero, then indicate that the simulator exited instead of stopped. * mn10300_sim.h (struct _state): Add exited field. * simops.c (syscall): Set State.exited for SYS_exit. Wed Jun 11 22:07:56 1997 Jeffrey A Law (law@cygnus.com) * simops.c: Fix thinko in last change. Tue Jun 10 12:31:32 1997 Jeffrey A Law (law@cygnus.com) * simops.c: "call" stores the callee saved registers into the stack! Update the stack pointer properly when done with register saves. * simops.c: Fix return address computation for "call" instructions. Thu May 22 01:43:11 1997 Jeffrey A Law (law@cygnus.com) * interp.c (sim_open): Fix typo. Wed May 21 23:27:58 1997 Jeffrey A Law (law@cygnus.com) * interp.c (sim_resume): Add missing case in big switch statement (for extb instruction). Tue May 20 17:51:30 1997 Jeffrey A Law (law@cygnus.com) * interp.c: Replace all references to load_mem and store_mem with references to load_byte, load_half, load_3_byte, load_word and store_byte, store_half, store_3_byte, store_word. (INLINE): Delete definition. (load_mem_big): Likewise. (max_mem): Make it global. (dispatch): Make this function inline. (load_mem, store_mem): Delete functions. * mn10300_sim.h (INLINE): Define. (RLW): Delete unused definition. (load_mem, store_mem): Delete declarations. (load_mem_big): New definition. (load_byte, load_half, load_3_byte, load_word): New functions. (store_byte, store_half, store_3_byte, store_word): New functions. * simops.c: Replace all references to load_mem and store_mem with references to load_byte, load_half, load_3_byte, load_word and store_byte, store_half, store_3_byte, store_word. Tue May 20 10:21:51 1997 Andrew Cagney * interp.c (sim_open): Add callback to arguments. (sim_set_callbacks): Delete SIM_DESC argument. Mon May 19 13:54:22 1997 Jeffrey A Law (law@cygnus.com) * interp.c (dispatch): Make this an inline function. * simops.c (syscall): Use callback->write regardless of what file descriptor we're writing too. Sun May 18 16:46:31 1997 Jeffrey A Law (law@cygnus.com) * interp.c (load_mem_big): Remove function. It's now a macro defined elsewhere. (compare_simops): New function. (sim_open): Sort the Simops table before inserting entries into the hash table. * mn10300_sim.h: Remove unused #defines. (load_mem_big): Define. Fri May 16 16:36:17 1997 Jeffrey A Law (law@cygnus.com) * interp.c (load_mem): If we get a load from an out of range address, abort. (store_mem): Likewise for stores. (max_mem): New variable. Tue May 6 13:24:36 1997 Jeffrey A Law (law@cygnus.com) * mn10300_sim.h: Fix ordering of bits in the PSW. * interp.c: Improve hashing routine to avoid long list traversals for common instructions. Add HASH_STAT support. Rewrite opcode dispatch code using a big switch instead of cascaded if/else statements. Avoid useless calls to load_mem. Mon May 5 18:07:48 1997 Jeffrey A Law (law@cygnus.com) * mn10300_sim.h (struct _state): Add space for mdrq register. (REG_MDRQ): Define. * simops.c: Don't abort for trap. Add support for the extended instructions, "getx", "putx", "mulq", "mulqu", "sat16", "sat24", and "bsch". Thu Apr 24 00:39:51 1997 Doug Evans * configure: Regenerated to track ../common/aclocal.m4 changes. Fri Apr 18 14:04:04 1997 Andrew Cagney * interp.c (sim_stop): Add stub function. Thu Apr 17 03:26:59 1997 Doug Evans * Makefile.in (SIM_OBJS): Add sim-load.o. * interp.c (sim_kind, myname): New static locals. (sim_open): Set sim_kind, myname. Ignore -E arg. (sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to load file into simulator. Set start address from bfd. (sim_create_inferior): Return SIM_RC. Delete arg start_address. Wed Apr 16 19:30:44 1997 Andrew Cagney * simops.c (OP_F020): SYS_execv, SYS_time, SYS_times, SYS_utime only include if implemented by host. (OP_F020): Typecast arg passed to time function; Mon Apr 7 23:57:49 1997 Jeffrey A Law (law@cygnus.com) * simops.c (syscall): Handle new mn10300 calling conventions. Mon Apr 7 15:45:02 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. * config.in: Ditto. Fri Apr 4 20:02:37 1997 Ian Lance Taylor * Makefile.in: Change mn10300-opc.o to m10300-opc.o, to match corresponding change in opcodes directory. Wed Apr 2 15:06:28 1997 Doug Evans * interp.c (sim_open): New arg `kind'. * configure: Regenerated to track ../common/aclocal.m4 changes. Wed Apr 2 14:34:19 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Thu Mar 20 11:58:02 1997 Jeffrey A Law (law@cygnus.com) * simops.c: Fix register extraction for a two "movbu" variants. Somewhat simplify "sub" instructions. Correctly sign extend operands for "mul". Put the correct half of the result in MDR for "mul" and "mulu". Implement remaining instructions. Tweak opcode for "syscall". Tue Mar 18 14:21:21 1997 Jeffrey A Law (law@cygnus.com) * simops.c: Do syscall emulation in "syscall" instruction. Add dummy "trap" instruction. Wed Mar 19 01:14:00 1997 Andrew Cagney * configure: Regenerated to track ../common/aclocal.m4 changes. Mon Mar 17 15:10:07 1997 Andrew Cagney * configure: Re-generate. Fri Mar 14 10:34:11 1997 Michael Meissner * configure: Regenerate to track ../common/aclocal.m4 changes. Thu Mar 13 12:54:45 1997 Doug Evans * interp.c (sim_open): New SIM_DESC result. Argument is now in argv form. (other sim_*): New SIM_DESC argument. Wed Mar 12 15:04:00 1997 Jeffrey A Law (law@cygnus.com) * simops.c: Fix carry bit computation for "add" instructions. * simops.c: Fix typos in bset insns. Fix arguments to store_mem for bset imm8,(d8,an) and bclr imm8,(d8,an). Wed Mar 5 15:00:10 1997 Jeffrey A Law (law@cygnus.com) * simops.c: Fix register references when computing Z and N bits for lsr imm8,dn. Tue Feb 4 13:33:30 1997 Doug Evans * Makefile.in (@COMMON_MAKEFILE_FRAG): Use COMMON_{PRE,POST}_CONFIG_FRAG instead. * configure.in: sinclude ../common/aclocal.m4. * configure: Regenerated. Fri Jan 24 10:47:25 1997 Jeffrey A Law (law@cygnus.com) * interp.c (init_system): Allocate 2^19 bytes of space for the simulator. Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com) * configure configure.in Makefile.in: Update to new configure scheme which is more compatible with WinGDB builds. * configure.in: Improve comment on how to run autoconf. * configure: Re-run autoconf to get new ../common/aclocal.m4. * Makefile.in: Use autoconf substitution to install common makefile fragment. Tue Jan 21 15:03:04 1997 Jeffrey A Law (law@cygnus.com) * simops.c: Undo last change to "rol" and "ror", original code was correct! Thu Jan 16 11:28:14 1997 Jeffrey A Law (law@cygnus.com) * simops.c: Fix "rol" and "ror". Wed Jan 15 06:45:58 1997 Jeffrey A Law (law@cygnus.com) * simops.c: Fix typo in last change. Mon Jan 13 13:22:35 1997 Jeffrey A Law (law@cygnus.com) * simops.c: Use REG macros in few places not using them yet. Mon Jan 6 16:21:19 1997 Jeffrey A Law (law@cygnus.com) * mn10300_sim.h (struct _state): Fix number of registers! Tue Dec 31 16:20:41 1996 Jeffrey A Law (law@cygnus.com) * mn10300_sim.h (struct _state): Put all registers into a single array to make gdb implementation easier. (REG_*): Add definitions for all registers in the state array. (SEXT32, SEXT40, SEXT44, SEXT60): Remove unused macros. * simops.c: Related changes. Wed Dec 18 10:10:45 1996 Jeffrey A Law (law@cygnus.com) * interp.c (sim_resume): Handle 0xff as a single byte insn. * simops.c: Fix overflow computation for "add" and "inc" instructions. Mon Dec 16 10:03:52 1996 Jeffrey A Law (law@cygnus.com) * simops.c: Handle "break" instruction. * simops.c: Fix restoring the PC for "ret" and "retf" instructions. Wed Dec 11 09:53:10 1996 Jeffrey A Law (law@cygnus.com) * gencode.c (write_opcodes): Also write out the format of the opcode. * mn10300_sim.h (simops): Add "format" field. * interp.c (sim_resume): Deal with endianness issues here. Tue Dec 10 15:05:37 1996 Jeffrey A Law (law@cygnus.com) * simops.c (REG0_4): Define. Use REG0_4 for indexed loads/stores. Sat Dec 7 09:50:28 1996 Jeffrey A Law (law@cygnus.com) * simops.c (REG0_16): Fix typo. Fri Dec 6 14:13:34 1996 Jeffrey A Law (law@cygnus.com) * simops.c: Call abort for any instruction that's not currently simulated. * simops.c: Define accessor macros to extract register values from instructions. Use them consistently. * interp.c: Delete unused global variable "OP". (sim_resume): Remove unused variable "opcode". * simops.c: Fix some uninitialized variable problems, add parens to fix various -Wall warnings. * gencode.c (write_header): Add "insn" and "extension" arguments to the OP_* declarations. (write_template): Similarly for function templates. * interp.c (insn, extension): Remove global variables. Instead pass them as arguments to the OP_* functions. * mn10300_sim.h: Remove decls for "insn" and "extension". * simops.c (OP_*): Accept "insn" and "extension" as arguments instead of using globals. Thu Dec 5 22:26:31 1996 Jeffrey A Law (law@cygnus.com) * simops.c: Fix typos in "mov am,(d16,an)" and "mov am,(d32,an)" * simops.c: Fix thinkos in last change to "inc dn". Wed Dec 4 10:57:53 1996 Jeffrey A Law (law@cygnus.com) * simops.c: "add imm,sp" does not effect the condition codes. "inc dn" does effect the condition codes. Tue Dec 3 17:37:45 1996 Jeffrey A Law (law@cygnus.com) * simops.c: Treat both operands as signed values for "div" instruction. * simops.c: Fix simulation of division instructions. Fix typos/thinkos in several "cmp" and "sub" instructions. Mon Dec 2 12:31:40 1996 Jeffrey A Law (law@cygnus.com) * simops.c: Fix carry bit handling in "sub" and "cmp" instructions. * simops.c: Fix "mov imm8,an" and "mov imm16,dn". Sun Dec 1 16:05:42 1996 Jeffrey A Law (law@cygnus.com) * simops.c: Fix overflow computation for many instructions. * simops.c: Fix "mov dm, an", "movbu dm, (an)", and "movhu dm, (an)". * simops.c: Fix "mov am, dn". * simops.c: Fix more bugs in "add imm,an" and "add imm,dn". Wed Nov 27 09:20:42 1996 Jeffrey A Law (law@cygnus.com) * simops.c: Fix bugs in "movm" and "add imm,an". * simops.c: Don't lose the upper 24 bits of the return pointer in "call" and "calls" instructions. Rough cut at emulated system calls. * simops.c: Implement the remaining 5, 6 and 7 byte instructions. * simops.c: Implement remaining 4 byte instructions. * simops.c: Implement remaining 3 byte instructions. * simops.c: Implement remaining 2 byte instructions. Call abort for instructions we're not implementing now. Tue Nov 26 15:43:41 1996 Jeffrey A Law (law@cygnus.com) * simops.c: Implement lots of random instructions. * simops.c: Implement "movm" and "bCC" insns. * mn10300_sim.h (_state): Add another register (MDR). (REG_MDR): Define. * simops.c: Implement "cmp", "calls", "rets", "jmp" and a few additional random insns. * mn10300_sim.h (PSW_*): Define for CC status tracking. (REG_D0, REG_A0, REG_SP): Define. * simops.c: Implement "add", "addc" and a few other random instructions. * gencode.c, interp.c: Snapshot current simulator code. Mon Nov 25 12:46:38 1996 Jeffrey A Law (law@cygnus.com) * Makefile.in, config.in, configure, configure.in: New files. * gencode.c, interp.c, mn10300_sim.h, simops.c: New files.