/* Parameters for execution on any Hewlett-Packard PA-RISC machine. Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1995, 1999, 2000 Free Software Foundation, Inc. Contributed by the Center for Software Science at the University of Utah (pa-gdb-bugs@cs.utah.edu). This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ struct type; struct value; struct frame_info; /* PA 64-bit specific definitions. Override those which are in tm-hppa.h */ /* jimb: this must go. I'm just using it to disable code I haven't gotten working yet. */ #define GDB_TARGET_IS_HPPA_20W /* NOTE: cagney/2003-07-27: Using CC='cc +DA2.0W -Ae' configure hppa64-hp-hpux11.00; GDB managed to build / start / break main / run with multi-arch enabled. Not sure about much else as there appears to be an unrelated problem in the SOM symbol table reader causing GDB to loose line number information. Since prior to this switch and a other recent tweaks, 64 bit PA hadn't been building for some months, this is probably the lesser of several evils. */ #define GDB_MULTI_ARCH GDB_MULTI_ARCH_PARTIAL /* FIXME: brobecker 2003-05-22: All the definition from this point until the include of pa/tm-hppah.h are extracted from tm-hppa.h and tm-hppah.h. They have been temporarily moved here, until hppa64 is multiarched too. */ #if !GDB_MULTI_ARCH extern int hppa_hpux_pc_in_sigtramp (CORE_ADDR pc, char *name); #define PC_IN_SIGTRAMP(pc, name) hppa_hpux_pc_in_sigtramp (pc, name) #endif #if !GDB_MULTI_ARCH extern int hppa_reg_struct_has_addr (int gcc_p, struct type *type); #define REG_STRUCT_HAS_ADDR(gcc_p,type) hppa_reg_struct_has_addr (gcc_p,type) #endif /* Offset from address of function to start of its code. Zero on most machines. */ #if !GDB_MULTI_ARCH #define FUNCTION_START_OFFSET 0 #endif /* Advance PC across any function entry prologue instructions to reach some "real" code. */ #if !GDB_MULTI_ARCH extern CORE_ADDR hppa_skip_prologue (CORE_ADDR); #define SKIP_PROLOGUE(pc) (hppa_skip_prologue (pc)) #endif /* If PC is in some function-call trampoline code, return the PC where the function itself actually starts. If not, return NULL. */ #if !GDB_MULTI_ARCH #define SKIP_TRAMPOLINE_CODE(pc) hppa_skip_trampoline_code (pc) extern CORE_ADDR hppa_skip_trampoline_code (CORE_ADDR); #endif /* Return non-zero if we are in an appropriate trampoline. */ #if !GDB_MULTI_ARCH #define IN_SOLIB_CALL_TRAMPOLINE(pc, name) \ hppa_in_solib_call_trampoline (pc, name) extern int hppa_in_solib_call_trampoline (CORE_ADDR, char *); #endif #if !GDB_MULTI_ARCH #define IN_SOLIB_RETURN_TRAMPOLINE(pc, name) \ hppa_in_solib_return_trampoline (pc, name) extern int hppa_in_solib_return_trampoline (CORE_ADDR, char *); #endif #if !GDB_MULTI_ARCH #undef DEPRECATED_SAVED_PC_AFTER_CALL #define DEPRECATED_SAVED_PC_AFTER_CALL(frame) hppa_saved_pc_after_call (frame) extern CORE_ADDR hppa_saved_pc_after_call (struct frame_info *); #endif #if !GDB_MULTI_ARCH extern int hppa_inner_than (CORE_ADDR lhs, CORE_ADDR rhs); #define INNER_THAN(lhs,rhs) hppa_inner_than(lhs,rhs) #endif #if !GDB_MULTI_ARCH extern CORE_ADDR hppa_stack_align (CORE_ADDR sp); #define STACK_ALIGN(sp) hppa_stack_align (sp) #endif /* Amount PC must be decremented by after a breakpoint. This is often the number of bytes returned by BREAKPOINT_FROM_PC but not always. Not on the PA-RISC */ #if !GDB_MULTI_ARCH #define DECR_PC_AFTER_BREAK 0 #endif /* Say how long (ordinary) registers are. This is a piece of bogosity used in push_word and a few other places; REGISTER_RAW_SIZE is the real way to know how big a register is. */ #if !GDB_MULTI_ARCH #define DEPRECATED_REGISTER_SIZE 4 #endif /* Number of machine registers */ #if !GDB_MULTI_ARCH #define NUM_REGS 128 #endif #if !GDB_MULTI_ARCH #define DEPRECATED_FP_REGNUM 3 /* Contains address of executing stack */ /* frame */ #endif #if !GDB_MULTI_ARCH #define SP_REGNUM 30 /* Contains address of top of stack */ #endif #if !GDB_MULTI_ARCH #define FP0_REGNUM 64 /* floating point reg. 0 (fspr) */ #endif /* compatibility with the rest of gdb. */ #if !GDB_MULTI_ARCH #define PC_REGNUM PCOQ_HEAD_REGNUM #endif #if !GDB_MULTI_ARCH #define NPC_REGNUM PCOQ_TAIL_REGNUM #endif /* Number of bytes of storage in the actual machine representation for register N. On the PA-RISC, all regs are 4 bytes, including the FP registers (they're accessed as two 4 byte halves). */ #if !GDB_MULTI_ARCH extern int hppa_register_raw_size (int reg_nr); #define REGISTER_RAW_SIZE(N) hppa_register_raw_size (N) #endif /* Total amount of space needed to store our copies of the machine's register state, the array `registers'. */ #if !GDB_MULTI_ARCH #define DEPRECATED_REGISTER_BYTES (NUM_REGS * 4) #endif #if !GDB_MULTI_ARCH extern int hppa_register_byte (int reg_nr); #define REGISTER_BYTE(N) hppa_register_byte (N) #endif /* Number of bytes of storage in the program's representation for register N. */ #if !GDB_MULTI_ARCH #define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N) #endif /* Largest value REGISTER_RAW_SIZE can have. */ #if !GDB_MULTI_ARCH #define DEPRECATED_MAX_REGISTER_RAW_SIZE 4 #endif /* Largest value REGISTER_VIRTUAL_SIZE can have. */ #if !GDB_MULTI_ARCH #define DEPRECATED_MAX_REGISTER_VIRTUAL_SIZE 8 #endif #if !GDB_MULTI_ARCH extern struct type * hppa_register_virtual_type (int reg_nr); #define REGISTER_VIRTUAL_TYPE(N) hppa_register_virtual_type (N) #endif #if !GDB_MULTI_ARCH extern void hppa_store_struct_return (CORE_ADDR addr, CORE_ADDR sp); #define STORE_STRUCT_RETURN(ADDR, SP) hppa_store_struct_return (ADDR, SP) #endif /* Extract from an array REGBUF containing the (raw) register state a function return value of type TYPE, and copy that, in virtual format, into VALBUF. */ #if !GDB_MULTI_ARCH void hppa_extract_return_value (struct type *type, char *regbuf, char *valbuf); #define DEPRECATED_EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ hppa_extract_return_value (TYPE, REGBUF, VALBUF); #endif /* elz: decide whether the function returning a value of type type will put it on the stack or in the registers. The pa calling convention says that: register 28 (called ret0 by gdb) contains any ASCII char, and any non_floating point value up to 32-bits. reg 28 and 29 contain non-floating point up tp 64 bits and larger than 32 bits. (higer order word in reg 28). fr4: floating point up to 64 bits sr1: space identifier (32-bit) stack: any lager than 64-bit, with the address in r28 */ #if !GDB_MULTI_ARCH extern use_struct_convention_fn hppa_use_struct_convention; #define USE_STRUCT_CONVENTION(gcc_p,type) hppa_use_struct_convention (gcc_p,type) #endif /* Write into appropriate registers a function return value of type TYPE, given in virtual format. */ #if !GDB_MULTI_ARCH extern void hppa_store_return_value (struct type *type, char *valbuf); #define DEPRECATED_STORE_RETURN_VALUE(TYPE,VALBUF) \ hppa_store_return_value (TYPE, VALBUF); #endif #if !GDB_MULTI_ARCH extern CORE_ADDR hppa_extract_struct_value_address (char *regbuf); #define DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ hppa_extract_struct_value_address (REGBUF) #endif #if !GDB_MULTI_ARCH extern int hppa_cannot_store_register (int regnum); #define CANNOT_STORE_REGISTER(regno) hppa_cannot_store_register (regno) #endif #if !GDB_MULTI_ARCH #define DEPRECATED_INIT_EXTRA_FRAME_INFO(fromleaf, frame) hppa_init_extra_frame_info (fromleaf, frame) extern void hppa_init_extra_frame_info (int, struct frame_info *); #endif /* Describe the pointer in each stack frame to the previous stack frame (its caller). */ /* DEPRECATED_FRAME_CHAIN takes a frame's nominal address and produces the frame's chain-pointer. */ /* In the case of the PA-RISC, the frame's nominal address is the address of a 4-byte word containing the calling frame's address (previous FP). */ #if !GDB_MULTI_ARCH #define DEPRECATED_FRAME_CHAIN(thisframe) hppa_frame_chain (thisframe) extern CORE_ADDR hppa_frame_chain (struct frame_info *); #endif #if !GDB_MULTI_ARCH extern int hppa_frame_chain_valid (CORE_ADDR, struct frame_info *); #define DEPRECATED_FRAME_CHAIN_VALID(chain, thisframe) hppa_frame_chain_valid (chain, thisframe) #endif /* Define other aspects of the stack frame. */ /* A macro that tells us whether the function invocation represented by FI does not have a frame on the stack associated with it. If it does not, FRAMELESS is set to 1, else 0. */ #if !GDB_MULTI_ARCH #define FRAMELESS_FUNCTION_INVOCATION(FI) \ (hppa_frameless_function_invocation (FI)) extern int hppa_frameless_function_invocation (struct frame_info *); #endif #if !GDB_MULTI_ARCH extern CORE_ADDR hppa_frame_saved_pc (struct frame_info *frame); #define DEPRECATED_FRAME_SAVED_PC(FRAME) hppa_frame_saved_pc (FRAME) #endif #if !GDB_MULTI_ARCH extern CORE_ADDR hppa_frame_locals_address (struct frame_info *fi); #define DEPRECATED_FRAME_LOCALS_ADDRESS(fi) hppa_frame_locals_address (fi) #endif #if !GDB_MULTI_ARCH #define FRAME_ARGS_SKIP 0 #endif /* Things needed for making the inferior call functions. */ #if !GDB_MULTI_ARCH #define DEPRECATED_PUSH_DUMMY_FRAME hppa_push_dummy_frame () extern void hppa_push_dummy_frame (void); #endif /* Discard from the stack the innermost frame, restoring all saved registers. */ #if !GDB_MULTI_ARCH #define DEPRECATED_POP_FRAME hppa_pop_frame () extern void hppa_pop_frame (void); #endif #if !GDB_MULTI_ARCH #define DEPRECATED_CALL_DUMMY_LENGTH (INSTRUCTION_SIZE * 28) #endif #if !GDB_MULTI_ARCH #define DEPRECATED_CALL_DUMMY_START_OFFSET 0 #endif #if !GDB_MULTI_ARCH #define DEPRECATED_PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \ (hppa_push_arguments((nargs), (args), (sp), (struct_return), (struct_addr))) extern CORE_ADDR hppa_push_arguments (int, struct value **, CORE_ADDR, int, CORE_ADDR); #endif #if !GDB_MULTI_ARCH extern CORE_ADDR hppa_smash_text_address (CORE_ADDR addr); #define SMASH_TEXT_ADDRESS(addr) hppa_smash_text_address (addr) #endif #if !GDB_MULTI_ARCH #define BELIEVE_PCC_PROMOTION 1 #endif #if !GDB_MULTI_ARCH #define TARGET_READ_PC(pid) hppa_target_read_pc (pid) extern CORE_ADDR hppa_target_read_pc (ptid_t); #endif #if !GDB_MULTI_ARCH #define TARGET_WRITE_PC(v,pid) hppa_target_write_pc (v,pid) extern void hppa_target_write_pc (CORE_ADDR, ptid_t); #endif #if !GDB_MULTI_ARCH #define DEPRECATED_TARGET_READ_FP() hppa_target_read_fp () extern CORE_ADDR hppa_target_read_fp (void); #endif #include "pa/tm-hppah.h" #define HPUX_1100 1 /* The low two bits of the IA are the privilege level of the instruction. */ #define ADDR_BITS_REMOVE(addr) ((CORE_ADDR)addr & (CORE_ADDR)~3) /* Say how long (ordinary) registers are. This is used in push_word and a few other places, but REGISTER_RAW_SIZE is the real way to know how big a register is. */ #undef DEPRECATED_REGISTER_SIZE #define DEPRECATED_REGISTER_SIZE 8 /* Number of bytes of storage in the actual machine representation for register N. On the PA-RISC 2.0, all regs are 8 bytes, including the FP registers (they're accessed as two 4 byte halves). */ #undef REGISTER_RAW_SIZE #define REGISTER_RAW_SIZE(N) 8 /* Largest value REGISTER_RAW_SIZE can have. */ #undef DEPRECATED_MAX_REGISTER_RAW_SIZE #define DEPRECATED_MAX_REGISTER_RAW_SIZE 8 /* Total amount of space needed to store our copies of the machine's register state, the array `registers'. */ #undef DEPRECATED_REGISTER_BYTES #define DEPRECATED_REGISTER_BYTES (NUM_REGS * 8) /* Index within `registers' of the first byte of the space for register N. */ #undef REGISTER_BYTE #define REGISTER_BYTE(N) ((N) * 8) #undef REGISTER_VIRTUAL_TYPE #define REGISTER_VIRTUAL_TYPE(N) \ ((N) < FP4_REGNUM ? builtin_type_unsigned_long_long : builtin_type_double) /* Number of machine registers */ #undef NUM_REGS #define NUM_REGS 96 /* Initializer for an array of names of registers. There should be NUM_REGS strings in this initializer. They are in rows of eight entries */ extern const char *hppa64_register_name (int i); #define REGISTER_NAME hppa64_register_name #undef FP0_REGNUM #undef FP4_REGNUM #define FP0_REGNUM 64 /* floating point reg. 0 (fspr)*/ #define FP4_REGNUM 68 /* Redefine some target bit sizes from the default. */ /* Number of bits in a long or unsigned long for the target machine. */ #define TARGET_LONG_BIT 64 /* Number of bits in a long long or unsigned long long for the target machine. */ #define TARGET_LONG_LONG_BIT 64 /* Number of bits in a pointer for the target machine */ #define TARGET_PTR_BIT 64 /* Argument Pointer Register */ #define AP_REGNUM 29 #define DP_REGNUM 27 #define FP5_REGNUM 70 #define SR5_REGNUM 48 /* We access locals from SP. This may not work for frames which call alloca; for those, we may need to consult unwind tables. jimb: FIXME. */ #undef DEPRECATED_FRAME_LOCALS_ADDRESS #define DEPRECATED_FRAME_LOCALS_ADDRESS(fi) (get_frame_base (fi)) /* For a number of horrible reasons we may have to adjust the location of variables on the stack. Ugh. jimb: why? */ #define HPREAD_ADJUST_STACK_ADDRESS(ADDR) hpread_adjust_stack_address(ADDR) extern int hpread_adjust_stack_address (CORE_ADDR); /* jimb: omitted dynamic linking stuff here */ /* This sequence of words is the instructions ; Call stack frame has already been built by gdb. Since we could be calling ; a varargs function, and we do not have the benefit of a stub to put things in ; the right place, we load the first 8 word of arguments into both the general ; and fp registers. call_dummy nop copy %r4,%r29 copy %r5,%r22 copy %r6,%r27 fldd -64(0,%r29),%fr4 fldd -56(0,%r29),%fr5 fldd -48(0,%r29),%fr6 fldd -40(0,%r29),%fr7 fldd -32(0,%r29),%fr8 fldd -24(0,%r29),%fr9 fldd -16(0,%r29),%fr10 fldd -8(0,%r29),%fr11 copy %r22,%r1 ldd -64(%r29), %r26 ldd -56(%r29), %r25 ldd -48(%r29), %r24 ldd -40(%r29), %r23 ldd -32(%r29), %r22 ldd -24(%r29), %r21 ldd -16(%r29), %r20 bve,l (%r1),%r2 ldd -8(%r29), %r19 break 4, 8 mtsp %r21, %sr0 ble 0(%sr0, %r22) nop */ /* Call dummys are sized and written out in word sized hunks. So we have to pack the instructions into words. Ugh. */ #undef CALL_DUMMY #define CALL_DUMMY {0x08000240349d0000LL, 0x34b6000034db0000LL, \ 0x53a43f8353a53f93LL, 0x53a63fa353a73fb3LL,\ 0x53a83fc353a93fd3LL, 0x2fa1100a2fb1100bLL,\ 0x36c1000053ba3f81LL, 0x53b93f9153b83fa1LL,\ 0x53b73fb153b63fc1LL, 0x53b53fd10fa110d4LL,\ 0xe820f0000fb110d3LL, 0x0001000400151820LL,\ 0xe6c0000008000240LL} #define DEPRECATED_CALL_DUMMY_BREAKPOINT_OFFSET 22 * 4 /* DEPRECATED_CALL_DUMMY_LENGTH is computed based on the size of a word on the target machine, not the size of an instruction. Since a word on this target holds two instructions we have to divide the instruction size by two to get the word size of the dummy. */ #undef DEPRECATED_CALL_DUMMY_LENGTH #define DEPRECATED_CALL_DUMMY_LENGTH (INSTRUCTION_SIZE * 26 / 2) /* The PA64 ABI mandates a 16 byte stack alignment. */ #undef STACK_ALIGN #define STACK_ALIGN(arg) ( ((arg)%16) ? (((arg)+15)&-16) : (arg)) /* The PA64 ABI reserves 64 bytes of stack space for outgoing register parameters. */ #undef REG_PARM_STACK_SPACE #define REG_PARM_STACK_SPACE 64 /* Use the 64-bit calling conventions designed for the PA2.0 in wide mode. */ #define PA20W_CALLING_CONVENTIONS #undef FUNC_LDIL_OFFSET #undef FUNC_LDO_OFFSET #undef SR4EXPORT_LDIL_OFFSET #undef SR4EXPORT_LDO_OFFSET #undef REG_STRUCT_HAS_ADDR #undef DEPRECATED_EXTRACT_RETURN_VALUE /* RM: floats are returned in FR4R, doubles in FR4 * integral values are in r28, padded on the left * aggregates less that 65 bits are in r28, right padded * aggregates upto 128 bits are in r28 and r29, right padded */ #define DEPRECATED_EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ { \ if (TYPE_CODE (TYPE) == TYPE_CODE_FLT) \ memcpy ((VALBUF), \ ((char *)(REGBUF)) + REGISTER_BYTE (FP4_REGNUM) + \ (DEPRECATED_REGISTER_SIZE - TYPE_LENGTH (TYPE)), \ TYPE_LENGTH (TYPE)); \ else if (is_integral_type(TYPE)) \ memcpy ((VALBUF), \ (char *)(REGBUF) + REGISTER_BYTE (28) + \ (DEPRECATED_REGISTER_SIZE - TYPE_LENGTH (TYPE)), \ TYPE_LENGTH (TYPE)); \ else if (TYPE_LENGTH (TYPE) <= 8) \ memcpy ((VALBUF), \ (char *)(REGBUF) + REGISTER_BYTE (28), \ TYPE_LENGTH (TYPE)); \ else if (TYPE_LENGTH (TYPE) <= 16) \ { \ memcpy ((VALBUF), \ (char *)(REGBUF) + REGISTER_BYTE (28), \ 8); \ memcpy (((char *) VALBUF + 8), \ (char *)(REGBUF) + REGISTER_BYTE (29), \ TYPE_LENGTH (TYPE) - 8); \ } \ } /* RM: struct upto 128 bits are returned in registers */ #undef USE_STRUCT_CONVENTION #define USE_STRUCT_CONVENTION(gcc_p, value_type)\ (TYPE_LENGTH (value_type) > 16) /* RM: for return command */ #undef DEPRECATED_STORE_RETURN_VALUE #define DEPRECATED_STORE_RETURN_VALUE(TYPE,VALBUF) \ { \ if (TYPE_CODE (TYPE) == TYPE_CODE_FLT) \ deprecated_write_register_bytes \ (REGISTER_BYTE (FP4_REGNUM) + \ (DEPRECATED_REGISTER_SIZE - TYPE_LENGTH (TYPE)), \ (VALBUF), \ TYPE_LENGTH (TYPE)); \ else if (is_integral_type(TYPE)) \ deprecated_write_register_bytes \ (REGISTER_BYTE (28) + \ (DEPRECATED_REGISTER_SIZE - TYPE_LENGTH (TYPE)), \ (VALBUF), \ TYPE_LENGTH (TYPE)); \ else if (TYPE_LENGTH (TYPE) <= 8) \ deprecated_write_register_bytes \ ( REGISTER_BYTE (28), \ (VALBUF), \ TYPE_LENGTH (TYPE)); \ else if (TYPE_LENGTH (TYPE) <= 16) \ { \ deprecated_write_register_bytes \ (REGISTER_BYTE (28), \ (VALBUF), \ 8); \ deprecated_write_register_bytes \ (REGISTER_BYTE (29), \ ((char *) VALBUF + 8), \ TYPE_LENGTH (TYPE) - 8); \ } \ } /* RM: these are the PA64 equivalents of the macros in tm-hppah.h -- * see comments there. For PA64, the save_state structure is at an * offset of 24 32-bit words from the sigcontext structure. The 64 bit * general registers are at an offset of 640 bytes from the beginning of the * save_state structure, and the floating pointer register are at an offset * of 256 bytes from the beginning of the save_state structure. */ #undef FRAME_SAVED_PC_IN_SIGTRAMP #define FRAME_SAVED_PC_IN_SIGTRAMP(FRAME, TMP) \ { \ *(TMP) = read_memory_integer (get_frame_base (FRAME) + (24 * 4) + 640 + (33 * 8), 8); \ } #undef FRAME_BASE_BEFORE_SIGTRAMP #define FRAME_BASE_BEFORE_SIGTRAMP(FRAME, TMP) \ { \ *(TMP) = read_memory_integer (get_frame_base (FRAME) + (24 * 4) + 640 + (30 * 8), 8); \ } #undef FRAME_FIND_SAVED_REGS_IN_SIGTRAMP #define FRAME_FIND_SAVED_REGS_IN_SIGTRAMP(FRAME, FSR) \ { \ int i; \ CORE_ADDR TMP1, TMP2; \ TMP1 = get_frame_base (FRAME) + (24 * 4) + 640; \ TMP2 = get_frame_base (FRAME) + (24 * 4) + 256; \ for (i = 0; i < NUM_REGS; i++) \ { \ if (i == SP_REGNUM) \ (FSR)[SP_REGNUM] = read_memory_integer (TMP1 + SP_REGNUM * 8, 8); \ else if (i >= FP0_REGNUM) \ (FSR)[i] = TMP2 + (i - FP0_REGNUM) * 8; \ else \ (FSR)[i] = TMP1 + i * 8; \ } \ } /* jimb: omitted purify call support */