/* Native-dependent code for the i386. Copyright (C) 2001-2014 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #include "defs.h" #include "i386-nat.h" #include "breakpoint.h" #include "command.h" #include "gdbcmd.h" #include "target.h" #include "gdb_assert.h" #include "inferior.h" /* Support for hardware watchpoints and breakpoints using the i386 debug registers. This provides several functions for inserting and removing hardware-assisted breakpoints and watchpoints, testing if one or more of the watchpoints triggered and at what address, checking whether a given region can be watched, etc. The functions below implement debug registers sharing by reference counts, and allow to watch regions up to 16 bytes long. */ struct i386_dr_low_type i386_dr_low; /* Support for 8-byte wide hw watchpoints. */ #define TARGET_HAS_DR_LEN_8 (i386_dr_low.debug_register_length == 8) /* DR7 Debug Control register fields. */ /* How many bits to skip in DR7 to get to R/W and LEN fields. */ #define DR_CONTROL_SHIFT 16 /* How many bits in DR7 per R/W and LEN field for each watchpoint. */ #define DR_CONTROL_SIZE 4 /* Watchpoint/breakpoint read/write fields in DR7. */ #define DR_RW_EXECUTE (0x0) /* Break on instruction execution. */ #define DR_RW_WRITE (0x1) /* Break on data writes. */ #define DR_RW_READ (0x3) /* Break on data reads or writes. */ /* This is here for completeness. No platform supports this functionality yet (as of March 2001). Note that the DE flag in the CR4 register needs to be set to support this. */ #ifndef DR_RW_IORW #define DR_RW_IORW (0x2) /* Break on I/O reads or writes. */ #endif /* Watchpoint/breakpoint length fields in DR7. The 2-bit left shift is so we could OR this with the read/write field defined above. */ #define DR_LEN_1 (0x0 << 2) /* 1-byte region watch or breakpoint. */ #define DR_LEN_2 (0x1 << 2) /* 2-byte region watch. */ #define DR_LEN_4 (0x3 << 2) /* 4-byte region watch. */ #define DR_LEN_8 (0x2 << 2) /* 8-byte region watch (AMD64). */ /* Local and Global Enable flags in DR7. When the Local Enable flag is set, the breakpoint/watchpoint is enabled only for the current task; the processor automatically clears this flag on every task switch. When the Global Enable flag is set, the breakpoint/watchpoint is enabled for all tasks; the processor never clears this flag. Currently, all watchpoint are locally enabled. If you need to enable them globally, read the comment which pertains to this in i386_insert_aligned_watchpoint below. */ #define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit. */ #define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit. */ #define DR_ENABLE_SIZE 2 /* Two enable bits per debug register. */ /* Local and global exact breakpoint enable flags (a.k.a. slowdown flags). These are only required on i386, to allow detection of the exact instruction which caused a watchpoint to break; i486 and later processors do that automatically. We set these flags for backwards compatibility. */ #define DR_LOCAL_SLOWDOWN (0x100) #define DR_GLOBAL_SLOWDOWN (0x200) /* Fields reserved by Intel. This includes the GD (General Detect Enable) flag, which causes a debug exception to be generated when a MOV instruction accesses one of the debug registers. FIXME: My Intel manual says we should use 0xF800, not 0xFC00. */ #define DR_CONTROL_RESERVED (0xFC00) /* Auxiliary helper macros. */ /* A value that masks all fields in DR7 that are reserved by Intel. */ #define I386_DR_CONTROL_MASK (~DR_CONTROL_RESERVED) /* The I'th debug register is vacant if its Local and Global Enable bits are reset in the Debug Control register. */ #define I386_DR_VACANT(state, i) \ (((state)->dr_control_mirror & (3 << (DR_ENABLE_SIZE * (i)))) == 0) /* Locally enable the break/watchpoint in the I'th debug register. */ #define I386_DR_LOCAL_ENABLE(state, i) \ do { \ (state)->dr_control_mirror |= \ (1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \ } while (0) /* Globally enable the break/watchpoint in the I'th debug register. */ #define I386_DR_GLOBAL_ENABLE(state, i) \ do { \ (state)->dr_control_mirror |= \ (1 << (DR_GLOBAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \ } while (0) /* Disable the break/watchpoint in the I'th debug register. */ #define I386_DR_DISABLE(state, i) \ do { \ (state)->dr_control_mirror &= \ ~(3 << (DR_ENABLE_SIZE * (i))); \ } while (0) /* Set in DR7 the RW and LEN fields for the I'th debug register. */ #define I386_DR_SET_RW_LEN(state, i, rwlen) \ do { \ (state)->dr_control_mirror &= \ ~(0x0f << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \ (state)->dr_control_mirror |= \ ((rwlen) << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \ } while (0) /* Get from DR7 the RW and LEN fields for the I'th debug register. */ #define I386_DR_GET_RW_LEN(dr7, i) \ (((dr7) \ >> (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))) & 0x0f) /* Mask that this I'th watchpoint has triggered. */ #define I386_DR_WATCH_MASK(i) (1 << (i)) /* Did the watchpoint whose address is in the I'th register break? */ #define I386_DR_WATCH_HIT(dr6, i) ((dr6) & (1 << (i))) /* A macro to loop over all debug registers. */ #define ALL_DEBUG_REGISTERS(i) for (i = 0; i < DR_NADDR; i++) /* Per-process data. We don't bind this to a per-inferior registry because of targets like x86 GNU/Linux that need to keep track of processes that aren't bound to any inferior (e.g., fork children, checkpoints). */ struct i386_process_info { /* Linked list. */ struct i386_process_info *next; /* The process identifier. */ pid_t pid; /* Copy of i386 hardware debug registers. */ struct i386_debug_reg_state state; }; static struct i386_process_info *i386_process_list = NULL; /* Find process data for process PID. */ static struct i386_process_info * i386_find_process_pid (pid_t pid) { struct i386_process_info *proc; for (proc = i386_process_list; proc; proc = proc->next) if (proc->pid == pid) return proc; return NULL; } /* Add process data for process PID. Returns newly allocated info object. */ static struct i386_process_info * i386_add_process (pid_t pid) { struct i386_process_info *proc; proc = xcalloc (1, sizeof (*proc)); proc->pid = pid; proc->next = i386_process_list; i386_process_list = proc; return proc; } /* Get data specific info for process PID, creating it if necessary. Never returns NULL. */ static struct i386_process_info * i386_process_info_get (pid_t pid) { struct i386_process_info *proc; proc = i386_find_process_pid (pid); if (proc == NULL) proc = i386_add_process (pid); return proc; } /* Get debug registers state for process PID. */ struct i386_debug_reg_state * i386_debug_reg_state (pid_t pid) { return &i386_process_info_get (pid)->state; } /* See declaration in i386-nat.h. */ void i386_forget_process (pid_t pid) { struct i386_process_info *proc, **proc_link; proc = i386_process_list; proc_link = &i386_process_list; while (proc != NULL) { if (proc->pid == pid) { *proc_link = proc->next; xfree (proc); return; } proc_link = &proc->next; proc = *proc_link; } } /* Whether or not to print the mirrored debug registers. */ static int maint_show_dr; /* Types of operations supported by i386_handle_nonaligned_watchpoint. */ typedef enum { WP_INSERT, WP_REMOVE, WP_COUNT } i386_wp_op_t; /* Internal functions. */ /* Return the value of a 4-bit field for DR7 suitable for watching a region of LEN bytes for accesses of type TYPE. LEN is assumed to have the value of 1, 2, or 4. */ static unsigned i386_length_and_rw_bits (int len, enum target_hw_bp_type type); /* Insert a watchpoint at address ADDR, which is assumed to be aligned according to the length of the region to watch. LEN_RW_BITS is the value of the bit-field from DR7 which describes the length and access type of the region to be watched by this watchpoint. Return 0 on success, -1 on failure. */ static int i386_insert_aligned_watchpoint (struct i386_debug_reg_state *state, CORE_ADDR addr, unsigned len_rw_bits); /* Remove a watchpoint at address ADDR, which is assumed to be aligned according to the length of the region to watch. LEN_RW_BITS is the value of the bits from DR7 which describes the length and access type of the region watched by this watchpoint. Return 0 on success, -1 on failure. */ static int i386_remove_aligned_watchpoint (struct i386_debug_reg_state *state, CORE_ADDR addr, unsigned len_rw_bits); /* Insert or remove a (possibly non-aligned) watchpoint, or count the number of debug registers required to watch a region at address ADDR whose length is LEN for accesses of type TYPE. Return 0 on successful insertion or removal, a positive number when queried about the number of registers, or -1 on failure. If WHAT is not a valid value, bombs through internal_error. */ static int i386_handle_nonaligned_watchpoint (struct i386_debug_reg_state *state, i386_wp_op_t what, CORE_ADDR addr, int len, enum target_hw_bp_type type); /* Implementation. */ /* Clear the reference counts and forget everything we knew about the debug registers. */ void i386_cleanup_dregs (void) { /* Starting from scratch has the same effect. */ i386_forget_process (ptid_get_pid (inferior_ptid)); } /* Print the values of the mirrored debug registers. This is called when maint_show_dr is non-zero. To set that up, type "maint show-debug-regs" at GDB's prompt. */ static void i386_show_dr (struct i386_debug_reg_state *state, const char *func, CORE_ADDR addr, int len, enum target_hw_bp_type type) { int addr_size = gdbarch_addr_bit (target_gdbarch ()) / 8; int i; puts_unfiltered (func); if (addr || len) printf_unfiltered (" (addr=%lx, len=%d, type=%s)", /* This code is for ia32, so casting CORE_ADDR to unsigned long should be okay. */ (unsigned long)addr, len, type == hw_write ? "data-write" : (type == hw_read ? "data-read" : (type == hw_access ? "data-read/write" : (type == hw_execute ? "instruction-execute" /* FIXME: if/when I/O read/write watchpoints are supported, add them here. */ : "??unknown??")))); puts_unfiltered (":\n"); printf_unfiltered ("\tCONTROL (DR7): %s STATUS (DR6): %s\n", phex (state->dr_control_mirror, 8), phex (state->dr_status_mirror, 8)); ALL_DEBUG_REGISTERS(i) { printf_unfiltered ("\ \tDR%d: addr=0x%s, ref.count=%d DR%d: addr=0x%s, ref.count=%d\n", i, phex (state->dr_mirror[i], addr_size), state->dr_ref_count[i], i + 1, phex (state->dr_mirror[i + 1], addr_size), state->dr_ref_count[i+1]); i++; } } /* Return the value of a 4-bit field for DR7 suitable for watching a region of LEN bytes for accesses of type TYPE. LEN is assumed to have the value of 1, 2, or 4. */ static unsigned i386_length_and_rw_bits (int len, enum target_hw_bp_type type) { unsigned rw; switch (type) { case hw_execute: rw = DR_RW_EXECUTE; break; case hw_write: rw = DR_RW_WRITE; break; case hw_read: internal_error (__FILE__, __LINE__, _("The i386 doesn't support " "data-read watchpoints.\n")); case hw_access: rw = DR_RW_READ; break; #if 0 /* Not yet supported. */ case hw_io_access: rw = DR_RW_IORW; break; #endif default: internal_error (__FILE__, __LINE__, _("\ Invalid hardware breakpoint type %d in i386_length_and_rw_bits.\n"), (int) type); } switch (len) { case 1: return (DR_LEN_1 | rw); case 2: return (DR_LEN_2 | rw); case 4: return (DR_LEN_4 | rw); case 8: if (TARGET_HAS_DR_LEN_8) return (DR_LEN_8 | rw); /* ELSE FALL THROUGH */ default: internal_error (__FILE__, __LINE__, _("\ Invalid hardware breakpoint length %d in i386_length_and_rw_bits.\n"), len); } } /* Insert a watchpoint at address ADDR, which is assumed to be aligned according to the length of the region to watch. LEN_RW_BITS is the value of the bits from DR7 which describes the length and access type of the region to be watched by this watchpoint. Return 0 on success, -1 on failure. */ static int i386_insert_aligned_watchpoint (struct i386_debug_reg_state *state, CORE_ADDR addr, unsigned len_rw_bits) { int i; if (!i386_dr_low.set_addr || !i386_dr_low.set_control) return -1; /* First, look for an occupied debug register with the same address and the same RW and LEN definitions. If we find one, we can reuse it for this watchpoint as well (and save a register). */ ALL_DEBUG_REGISTERS(i) { if (!I386_DR_VACANT (state, i) && state->dr_mirror[i] == addr && I386_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits) { state->dr_ref_count[i]++; return 0; } } /* Next, look for a vacant debug register. */ ALL_DEBUG_REGISTERS(i) { if (I386_DR_VACANT (state, i)) break; } /* No more debug registers! */ if (i >= DR_NADDR) return -1; /* Now set up the register I to watch our region. */ /* Record the info in our local mirrored array. */ state->dr_mirror[i] = addr; state->dr_ref_count[i] = 1; I386_DR_SET_RW_LEN (state, i, len_rw_bits); /* Note: we only enable the watchpoint locally, i.e. in the current task. Currently, no i386 target allows or supports global watchpoints; however, if any target would want that in the future, GDB should probably provide a command to control whether to enable watchpoints globally or locally, and the code below should use global or local enable and slow-down flags as appropriate. */ I386_DR_LOCAL_ENABLE (state, i); state->dr_control_mirror |= DR_LOCAL_SLOWDOWN; state->dr_control_mirror &= I386_DR_CONTROL_MASK; return 0; } /* Remove a watchpoint at address ADDR, which is assumed to be aligned according to the length of the region to watch. LEN_RW_BITS is the value of the bits from DR7 which describes the length and access type of the region watched by this watchpoint. Return 0 on success, -1 on failure. */ static int i386_remove_aligned_watchpoint (struct i386_debug_reg_state *state, CORE_ADDR addr, unsigned len_rw_bits) { int i, retval = -1; ALL_DEBUG_REGISTERS(i) { if (!I386_DR_VACANT (state, i) && state->dr_mirror[i] == addr && I386_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits) { if (--state->dr_ref_count[i] == 0) /* no longer in use? */ { /* Reset our mirror. */ state->dr_mirror[i] = 0; I386_DR_DISABLE (state, i); } retval = 0; } } return retval; } /* Insert or remove a (possibly non-aligned) watchpoint, or count the number of debug registers required to watch a region at address ADDR whose length is LEN for accesses of type TYPE. Return 0 on successful insertion or removal, a positive number when queried about the number of registers, or -1 on failure. If WHAT is not a valid value, bombs through internal_error. */ static int i386_handle_nonaligned_watchpoint (struct i386_debug_reg_state *state, i386_wp_op_t what, CORE_ADDR addr, int len, enum target_hw_bp_type type) { int retval = 0; int max_wp_len = TARGET_HAS_DR_LEN_8 ? 8 : 4; static int size_try_array[8][8] = { {1, 1, 1, 1, 1, 1, 1, 1}, /* Trying size one. */ {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size two. */ {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size three. */ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size four. */ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size five. */ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size six. */ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size seven. */ {8, 1, 2, 1, 4, 1, 2, 1}, /* Trying size eight. */ }; while (len > 0) { int align = addr % max_wp_len; /* Four (eight on AMD64) is the maximum length a debug register can watch. */ int try = (len > max_wp_len ? (max_wp_len - 1) : len - 1); int size = size_try_array[try][align]; if (what == WP_COUNT) { /* size_try_array[] is defined such that each iteration through the loop is guaranteed to produce an address and a size that can be watched with a single debug register. Thus, for counting the registers required to watch a region, we simply need to increment the count on each iteration. */ retval++; } else { unsigned len_rw = i386_length_and_rw_bits (size, type); if (what == WP_INSERT) retval = i386_insert_aligned_watchpoint (state, addr, len_rw); else if (what == WP_REMOVE) retval = i386_remove_aligned_watchpoint (state, addr, len_rw); else internal_error (__FILE__, __LINE__, _("\ Invalid value %d of operation in i386_handle_nonaligned_watchpoint.\n"), (int)what); if (retval) break; } addr += size; len -= size; } return retval; } /* Update the inferior's debug registers with the new debug registers state, in NEW_STATE, and then update our local mirror to match. */ static void i386_update_inferior_debug_regs (struct i386_debug_reg_state *new_state) { struct i386_debug_reg_state *state = i386_debug_reg_state (ptid_get_pid (inferior_ptid)); int i; ALL_DEBUG_REGISTERS (i) { if (I386_DR_VACANT (new_state, i) != I386_DR_VACANT (state, i)) i386_dr_low.set_addr (i, new_state->dr_mirror[i]); else gdb_assert (new_state->dr_mirror[i] == state->dr_mirror[i]); } if (new_state->dr_control_mirror != state->dr_control_mirror) i386_dr_low.set_control (new_state->dr_control_mirror); *state = *new_state; } /* Insert a watchpoint to watch a memory region which starts at address ADDR and whose length is LEN bytes. Watch memory accesses of the type TYPE. Return 0 on success, -1 on failure. */ static int i386_insert_watchpoint (CORE_ADDR addr, int len, int type, struct expression *cond) { struct i386_debug_reg_state *state = i386_debug_reg_state (ptid_get_pid (inferior_ptid)); int retval; /* Work on a local copy of the debug registers, and on success, commit the change back to the inferior. */ struct i386_debug_reg_state local_state = *state; if (type == hw_read) return 1; /* unsupported */ if (((len != 1 && len !=2 && len !=4) && !(TARGET_HAS_DR_LEN_8 && len == 8)) || addr % len != 0) retval = i386_handle_nonaligned_watchpoint (&local_state, WP_INSERT, addr, len, type); else { unsigned len_rw = i386_length_and_rw_bits (len, type); retval = i386_insert_aligned_watchpoint (&local_state, addr, len_rw); } if (retval == 0) i386_update_inferior_debug_regs (&local_state); if (maint_show_dr) i386_show_dr (state, "insert_watchpoint", addr, len, type); return retval; } /* Remove a watchpoint that watched the memory region which starts at address ADDR, whose length is LEN bytes, and for accesses of the type TYPE. Return 0 on success, -1 on failure. */ static int i386_remove_watchpoint (struct target_ops *self, CORE_ADDR addr, int len, int type, struct expression *cond) { struct i386_debug_reg_state *state = i386_debug_reg_state (ptid_get_pid (inferior_ptid)); int retval; /* Work on a local copy of the debug registers, and on success, commit the change back to the inferior. */ struct i386_debug_reg_state local_state = *state; if (((len != 1 && len !=2 && len !=4) && !(TARGET_HAS_DR_LEN_8 && len == 8)) || addr % len != 0) retval = i386_handle_nonaligned_watchpoint (&local_state, WP_REMOVE, addr, len, type); else { unsigned len_rw = i386_length_and_rw_bits (len, type); retval = i386_remove_aligned_watchpoint (&local_state, addr, len_rw); } if (retval == 0) i386_update_inferior_debug_regs (&local_state); if (maint_show_dr) i386_show_dr (state, "remove_watchpoint", addr, len, type); return retval; } /* Return non-zero if we can watch a memory region that starts at address ADDR and whose length is LEN bytes. */ static int i386_region_ok_for_watchpoint (CORE_ADDR addr, int len) { struct i386_debug_reg_state *state = i386_debug_reg_state (ptid_get_pid (inferior_ptid)); int nregs; /* Compute how many aligned watchpoints we would need to cover this region. */ nregs = i386_handle_nonaligned_watchpoint (state, WP_COUNT, addr, len, hw_write); return nregs <= DR_NADDR ? 1 : 0; } /* If the inferior has some watchpoint that triggered, set the address associated with that watchpoint and return non-zero. Otherwise, return zero. */ static int i386_stopped_data_address (struct target_ops *ops, CORE_ADDR *addr_p) { struct i386_debug_reg_state *state = i386_debug_reg_state (ptid_get_pid (inferior_ptid)); CORE_ADDR addr = 0; int i; int rc = 0; /* The current thread's DR_STATUS. We always need to read this to check whether some watchpoint caused the trap. */ unsigned status; /* We need DR_CONTROL as well, but only iff DR_STATUS indicates a data breakpoint trap. Only fetch it when necessary, to avoid an unnecessary extra syscall when no watchpoint triggered. */ int control_p = 0; unsigned control = 0; /* In non-stop/async, threads can be running while we change the STATE (and friends). Say, we set a watchpoint, and let threads resume. Now, say you delete the watchpoint, or add/remove watchpoints such that STATE changes while threads are running. On targets that support non-stop, inserting/deleting watchpoints updates the STATE only. It does not update the real thread's debug registers; that's only done prior to resume. Instead, if threads are running when the mirror changes, a temporary and transparent stop on all threads is forced so they can get their copy of the debug registers updated on re-resume. Now, say, a thread hit a watchpoint before having been updated with the new STATE contents, and we haven't yet handled the corresponding SIGTRAP. If we trusted STATE below, we'd mistake the real trapped address (from the last time we had updated debug registers in the thread) with whatever was currently in STATE. So to fix this, STATE always represents intention, what we _want_ threads to have in debug registers. To get at the address and cause of the trap, we need to read the state the thread still has in its debug registers. In sum, always get the current debug register values the current thread has, instead of trusting the global mirror. If the thread was running when we last changed watchpoints, the mirror no longer represents what was set in this thread's debug registers. */ status = i386_dr_low.get_status (); ALL_DEBUG_REGISTERS(i) { if (!I386_DR_WATCH_HIT (status, i)) continue; if (!control_p) { control = i386_dr_low.get_control (); control_p = 1; } /* This second condition makes sure DRi is set up for a data watchpoint, not a hardware breakpoint. The reason is that GDB doesn't call the target_stopped_data_address method except for data watchpoints. In other words, I'm being paranoiac. */ if (I386_DR_GET_RW_LEN (control, i) != 0) { addr = i386_dr_low.get_addr (i); rc = 1; if (maint_show_dr) i386_show_dr (state, "watchpoint_hit", addr, -1, hw_write); } } if (maint_show_dr && addr == 0) i386_show_dr (state, "stopped_data_addr", 0, 0, hw_write); if (rc) *addr_p = addr; return rc; } static int i386_stopped_by_watchpoint (struct target_ops *ops) { CORE_ADDR addr = 0; return i386_stopped_data_address (ops, &addr); } /* Insert a hardware-assisted breakpoint at BP_TGT->placed_address. Return 0 on success, EBUSY on failure. */ static int i386_insert_hw_breakpoint (struct target_ops *self, struct gdbarch *gdbarch, struct bp_target_info *bp_tgt) { struct i386_debug_reg_state *state = i386_debug_reg_state (ptid_get_pid (inferior_ptid)); unsigned len_rw = i386_length_and_rw_bits (1, hw_execute); CORE_ADDR addr = bp_tgt->placed_address; /* Work on a local copy of the debug registers, and on success, commit the change back to the inferior. */ struct i386_debug_reg_state local_state = *state; int retval = i386_insert_aligned_watchpoint (&local_state, addr, len_rw) ? EBUSY : 0; if (retval == 0) i386_update_inferior_debug_regs (&local_state); if (maint_show_dr) i386_show_dr (state, "insert_hwbp", addr, 1, hw_execute); return retval; } /* Remove a hardware-assisted breakpoint at BP_TGT->placed_address. Return 0 on success, -1 on failure. */ static int i386_remove_hw_breakpoint (struct target_ops *self, struct gdbarch *gdbarch, struct bp_target_info *bp_tgt) { struct i386_debug_reg_state *state = i386_debug_reg_state (ptid_get_pid (inferior_ptid)); unsigned len_rw = i386_length_and_rw_bits (1, hw_execute); CORE_ADDR addr = bp_tgt->placed_address; /* Work on a local copy of the debug registers, and on success, commit the change back to the inferior. */ struct i386_debug_reg_state local_state = *state; int retval = i386_remove_aligned_watchpoint (&local_state, addr, len_rw); if (retval == 0) i386_update_inferior_debug_regs (&local_state); if (maint_show_dr) i386_show_dr (state, "remove_hwbp", addr, 1, hw_execute); return retval; } /* Returns the number of hardware watchpoints of type TYPE that we can set. Value is positive if we can set CNT watchpoints, zero if setting watchpoints of type TYPE is not supported, and negative if CNT is more than the maximum number of watchpoints of type TYPE that we can support. TYPE is one of bp_hardware_watchpoint, bp_read_watchpoint, bp_write_watchpoint, or bp_hardware_breakpoint. CNT is the number of such watchpoints used so far (including this one). OTHERTYPE is non-zero if other types of watchpoints are currently enabled. We always return 1 here because we don't have enough information about possible overlap of addresses that they want to watch. As an extreme example, consider the case where all the watchpoints watch the same address and the same region length: then we can handle a virtually unlimited number of watchpoints, due to debug register sharing implemented via reference counts in i386-nat.c. */ static int i386_can_use_hw_breakpoint (struct target_ops *self, int type, int cnt, int othertype) { return 1; } static void add_show_debug_regs_command (void) { /* A maintenance command to enable printing the internal DRi mirror variables. */ add_setshow_boolean_cmd ("show-debug-regs", class_maintenance, &maint_show_dr, _("\ Set whether to show variables that mirror the x86 debug registers."), _("\ Show whether to show variables that mirror the x86 debug registers."), _("\ Use \"on\" to enable, \"off\" to disable.\n\ If enabled, the debug registers values are shown when GDB inserts\n\ or removes a hardware breakpoint or watchpoint, and when the inferior\n\ triggers a breakpoint or watchpoint."), NULL, NULL, &maintenance_set_cmdlist, &maintenance_show_cmdlist); } /* There are only two global functions left. */ void i386_use_watchpoints (struct target_ops *t) { /* After a watchpoint trap, the PC points to the instruction after the one that caused the trap. Therefore we don't need to step over it. But we do need to reset the status register to avoid another trap. */ t->to_have_continuable_watchpoint = 1; t->to_can_use_hw_breakpoint = i386_can_use_hw_breakpoint; t->to_region_ok_for_hw_watchpoint = i386_region_ok_for_watchpoint; t->to_stopped_by_watchpoint = i386_stopped_by_watchpoint; t->to_stopped_data_address = i386_stopped_data_address; t->to_insert_watchpoint = i386_insert_watchpoint; t->to_remove_watchpoint = i386_remove_watchpoint; t->to_insert_hw_breakpoint = i386_insert_hw_breakpoint; t->to_remove_hw_breakpoint = i386_remove_hw_breakpoint; } void i386_set_debug_register_length (int len) { /* This function should be called only once for each native target. */ gdb_assert (i386_dr_low.debug_register_length == 0); gdb_assert (len == 4 || len == 8); i386_dr_low.debug_register_length = len; add_show_debug_regs_command (); }