* solib-svr4.c (scan_dyntag): New variable dyn_addr. Replace gdb_assert
by a conditional setting DYN_ADDR. Use DYN_ADDR.
* config/djgpp/fnchange.lst: Add translations for
symbol-without-target_section.exp and symbol-without-target_section.c.
gdb/testsuite/
* gdb.base/symbol-without-target_section.exp,
gdb.base/symbol-without-target_section.c: New.
arm_pc_is_thumb.
(arm_pc_is_thumb): Use arm_find_mapping_symbol.
(extend_buffer_earlier): New function.
(MAX_IT_BLOCK_PREFIX, IT_SCAN_THRESHOLD): New constants.
(arm_adjust_breakpoint_address): New function.
(arm_gdbarch_init): Register arm_adjust_breakpoint_address.
testsuite/
* gdb.arch/thumb2-it.S (it_breakpoints): New function.
* gdb.arch/thumb2-it.exp (test_it_break): New function.
(Top level): Call it.
(arm_linux_thumb2_le_breakpoint): New constants.
(arm_linux_init_abi): Set thumb2_breakpoint and
thumb2_breakpoint_size.
* arm-tdep.c (thumb_insn_size, thumb_advance_itstate): New functions.
(thumb_get_next_pc): Add a comment. Rename IT to ITSTATE.
Implement support for single stepping through IT blocks if
a 32-bit Thumb breakpoint instruction is available.
(arm_breakpoint_from_pc): If a 32-bit Thumb breakpoint instruction
is available, use it when needed.
(arm_remote_breakpoint_from_pc): New function.
(arm_gdbarch_init): Register arm_remote_breakpoint_from_pc.
* arm-tdep.h (struct gdbarch_tdep): Correct thumb_breakpoint
comment. Add thumb2_breakpoint and thumb2_breakpoint_size.
gdbserver/
* linux-arm-low.c (thumb_breakpoint_len): Delete.
(thumb2_breakpoint): New.
(arm_breakpoint_at): Check for Thumb-2 breakpoints.
testsuite/
* gdb.arch/thumb2-it.S, gdb.arch/thumb2-it.exp: New files.
match a breakpoint.
(handle_inferior_event): Move the check for unusual breakpoint
signals earlier.
gdbserver/
* linux-low.c (get_stop_pc): Check for SIGTRAP.
(linux_wait_for_event_1): Handle SIGILL and SIGSEGV as possible
breakpoints.
gdb/ChangeLog:
From Paul Hilfinger <hilfinger@adacore.com>
* amd64-tdep.c (amd_classify_aggregate): Handle the case of
a record of length <= 16 in which a field straddles the two
eightbytes.
gdb/testsuite/ChangeLog:
* gdb.ada/rec_return: New testcase.
* amd64-windows-tdep.c: #include gdbcore.h and regcache.h.
(amd64_windows_return_value): New function.
(amd64_windows_init_abi): Call set_gdbarch_return_value with
amd64_windows_return_value.
* i386-tdep.h (struct gdbarch_tdep): Add new field
integer_param_regs_saved_in_caller_frame.
* amd64-windows-tdep.c (amd64_windows_init_abi): Set
tdep->integer_param_regs_saved_in_caller_frame to 1.
* amd64-tdep.c (amd64_push_dummy_call): Allocate some memory on
stack if tdep->integer_param_regs_saved_in_caller_frame is set.
* i386-tdep.h (gdbarch_tdep): Add field memory_args_by_pointer.
* amd64-tdep.c (amd64_push_arguments): Add handling of architectures
where tdep->memory_args_by_pointer is non-zero.
* amd64-windows-tdep.c (amd64_windows_init_abi): Set
tdep->memory_args_by_pointer to 1.
gdb/ChangeLog:
* i386-tdep.h (enum amd64_reg_class): New, moved here from
amd64-tdep.c.
(struct gdbarch_tdep): Add fields call_dummy_num_integer_regs,
call_dummy_integer_regs, and classify.
* amd64-tdep.h (amd64_classify): Add declaration.
* amd64-tdep.c (amd64_dummy_call_integer_regs): New static constant.
(amd64_reg_class): Delete, moved to i386-tdep.h.
(amd64_classify): Make non-static. Move declaration to amd64-tdep.h.
Replace call to amd64_classify by call to tdep->classify.
(amd64_push_arguments): Get the list of registers to use for
passing integer parameters from the gdbarch tdep structure,
rather than using a hardcoded one. Replace calls to amd64_classify
by calls to tdep->classify.
(amd64_push_dummy_call): Get the register number used for
the "hidden" argument from tdep->call_dummy_integer_regs.
(amd64_init_abi): Initialize tdep->call_dummy_num_integer_regs
and tdep->call_dummy_integer_regs. Set tdep->classify.
* amd64-windows-tdep.c: Add include of gdbtypes.h.
(amd64_windows_dummy_call_integer_regs): New static global.
(amd64_windows_classify): New function.
(amd64_windows_init_abi): Initialize tdep->call_dummy_num_integer_regs
tdep->call_dummy_integer_regs and tdep->classify.
gdb/testsuite/ChangeLog:
* gdb.ada/call_pn: New testcase.
for the new regcache. All callers updated.
(regcache_cpy, regcache_cpy_no_passthrough): Do not set aspace here.
(get_thread_arch_regcache): Do not set aspace here.
* regcache.h (regcache_xmalloc): Update declaration.
* frame.c, infcall.c, ppc-linux-tdep.c: Calls to
regcache_xmalloc updated.
* procfs.c (insert_dbx_link_breakpoint): Delete declaration. Move up.
Only define if SYS_syssgi is defined.
(remove_dbx_link_breakpoint): Delete declaration. Move up.
(dbx_link_addr, insert_dbx_link_bpt_in_file)
(insert_dbx_link_bpt_in_region): Move up. Only define if SYS_syssgi
is itself defined.
(get_windows_debug_event): Issue error when process dies before completely
initializing.
(do_initial_windows_stuff): Set flag to indicate when we are done with the
initial steps of attaching to the child.
* gdb.cp/nsrecurs.exp: New test.
* gdb.cp/nsrecurs.cc: New test program.
* gdb.cp/nsstress.exp: New test.
* gdb.cp/nsstress.cc: New test program.
* gdb.cp/nsdecl.exp: New test.
* gdb.cp/nsdecl.cc: New test program.
2010-01-26 Sami Wagiaalla <swagiaal@redhat.com>
* cp-namespace.c (cp_lookup_symbol_namespace): Added
search_parent argument.
(cp_add_using): Initialize 'searched' field.
(reset_directive_searched): New function.
* cp-support.h: Add 'searched' field to using_direct struct.
(cp_lookup_symbol_imports): Ditto.
* cp-namespace.c (cp_lookup_symbol_imports): Ditto.
Perform recursive search.
Implement non parent search.
* valops.c (value_maybe_namespace_elt): Updated.
* gdb.cp/namespace-using.exp: Add test for printing of namespaces
imported into file scope.
Marked test as xfail.
* gdb.cp/namespace-using.cc (marker5): New function.
* gdb.cp/shadow.exp: New test.
* gdb.cp/shadow.cc: New test program.
* gdb.cp/nsimport.exp: New test.
* gdb.cp/nsimport.cc: New test program.
2010-01-26 Sami Wagiaalla <swagiaal@redhat.com>
PR gdb/10929:
* dwarf2read.c (read_lexical_block_scope): Create blocks for
scopes which contain using directives even if they contain no
declarations.
* symtab.c (lookup_symbol_aux): Pass lowest level block to
la_lookup_symbol_nonlocal.
* cp-namespace.c (cp_lookup_symbol_nonlocal): call
cp_lookup_symbol_namespace.
(cp_lookup_symbol_namespace): Perform an import lookup at every
block level.
(cp_lookup_symbol_imports): New function.
(cp_lookup_symbol_in_namespace): New function.
PR backtrace/10770:
* valarith.c (value_binop): Handle BINOP_GTR, BINOP_LEQ, and
BINOP_GEQ. Handle BINOP_NOTEQUAL in the signed case.
* dwarf2expr.c (new_dwarf_expr_context): Allocate
dwarf_stack_values, not CORE_ADDRs.
(execute_stack_op): Change DW_OP_div and comparison operators to
use signed operands.
gdb/testsuite
PR backtrace/10770:
* gdb.dwarf2/pr10770.exp: New file.
* gdb.dwarf2/pr10770.c: New file.
* gdb.dwarf2/Makefile.in (EXECUTABLES): Add pr10770.
* infcmd.c (inferior_args): Rename to ...
(inferior_args_scratch): ... this.
(inferior_io_terminal): Rename to ...
(inferior_io_terminal_scratch): ... this.
(inferior_argc, inferior_argv): Remove.
(set_inferior_io_terminal, get_inferior_io_terminal): Store
inside current_inferior().
(set_inferior_tty_command, show_inferior_tty_command): New.
(get_inferior_args, set_inferior_args): Store inside
current_inferior().
(notice_args_set): Likewise and rename to...
(set_args_command): ... this.
(set_inferior_args_vector): Likewise.
(notice_args_read): Rename to...
(show_args_command): ...new.
(tty_command): Remove.
(run_command_1): Don't free old args, as they are freed by
set_inferior_arg now.
(run_no_args_command): Likewise.
(inferior_environ): Remove.
(run_command_1): Use environment of the current inferior.
(environment_info, set_environment_command)
(unset_environment_command, path_info, path_command): Likewise.
(_initialize_infcmd): Adjust for function and variable renames.
Do not init inferior_environ.
* inferior.h (set_inferior_arg): Adjust prototype.
(struct inferior): New fields args, argc, argv, terminal, environment.
(inferior_environ): Remove declaration.
* inferior.c (free_inferior): Free new fields.
(add_inferior_silent): Initialize 'environment' field.
* main.c (captured_main): Set arguments only after the initial
inferior has been created. Set set_inferior_io_terminal,
not tty_command.
* mi/mi-main.c (mi_cmd_env_path): Use environment of the current
inferior.
(_initialize_mi_cmd_env): Adjust for disappearance of global
inferior_environ.
* solib.c (solib_find): Use environment of the current inferior.
* varobj.c (varobj_add_child, install_dynamic_child): Wrap into #if
HAVE_PYTHON.
(instantiate_pretty_printer): Move HAVE_PYTHON outside of the function.
PR c++/8000:
* dwarf2read.c (partial_die_parent_scope): Put enumeration type
into parent scope, and enumerator into grandparent scope.
gdb/testsuite
PR c++/8000:
* gdb.cp/namespace.exp: Use new enum. Fix line numbers in
existing tests.
* gdb.cp/namespace.cc (AAA::SomeEnum): New enum.
(main): Use AAA::SomeEnum.
The function is being commented out instead of deleted because this function
is used by some code which is itself commented out. It is unclear which
the latter was commented out.
* stack.c (print_block_frame_labels): Comment function out.
* ada-lang.c (trust_pad_over_xvs): New static variable.
(ada_is_aligner_type): If !trust_pad_over_xvs and there is a
parallel XVS type, follow the XVS type instead of the PAD type.
(unwrap_value): Make sure that there is no parallel XVE type
before returning the value as is.
(set_ada_list, show_ada_list): New static variables.
(set_ada_command, show_ada_command): New functions.
(_initialize_ada_language): Add new "set/show ada" prefix commands.
Add new "set/show ada trust-PAD-over-XVS" setting.
* tracepoint.h (enum trace_stop_reason): New enum.
(struct trace_status): New struct.
(parse_trace_status): Declare.
(struct uploaded_tp): Move here from remote.c,
add fields for actions.
(struct uploaded_tsv): New struct.
* tracepoint.c (tfile_ops): New target vector.
(trace_fd): New global.
(tfile_open): New function.
(tfile_close): New function.
(tfile_files_info): New function.
(tfile_get_trace_status): New function.
(tfile_get_traceframe_address): New function.
(tfile_trace_find): New function.
(tfile_fetch_registers): New function.
(tfile_xfer_partial): New function.
(tfile_get_trace_state_variable_value): New function.
(init_tfile_ops): New function.
(_initialize_tracepoint): Call it, add tfile target.
(trace_status): New global.
(current_trace_status): New function.
(trace_running_p): Remove, change all users to get from
current_trace_status()->running.
(get_trace_status): Remove.
(trace_status_command): Call target_get_trace_status directly,
report more detail including tracing stop reasons.
(trace_find_command): Always allow tfind on a file.
(trace_find_pc_command): Ditto.
(trace_find_tracepoint_command): Ditto.
(trace_find_line_command): Ditto.
(trace_find_range_command): Ditto.
(trace_find_outside_command): Ditto.
(trace_frames_offset, cur_offset): Declare as off_t.
(trace_regblock_size): Rename from reg_size, update users.
(parse_trace_status): New function.
(tfile_interp_line): New function.
(disconnect_or_stop_tracing): Ensure current trace
status before asking what to do.
(stop_reason_names): New global.
(trace_save_command): New command.
(get_uploaded_tp): Move here from remote.c.
(find_matching_tracepoint): Ditto.
(merge_uploaded_tracepoints): New function.
(parse_trace_status): Use stop_reason_names.
(_initialize_tracepoint): Define tsave command.
* target.h (target_ops): New fields to_save_trace_data,
to_upload_tracepoints, to_upload_trace_state_variables,
to_get_raw_trace_data, change to_get_trace_status
to take a pointer to a status struct.
(target_save_trace_data): New macro.
(target_upload_tracepoints): New macro.
(target_upload_trace_state_variables): New macro.
(target_get_raw_trace_data): New macro.
* target.c (update_current_target): Add new methods, change
signature of to_get_trace_status.
* remote.c (hex2bin): Make globally visible.
(bin2hex): Ditto.
(remote_download_trace_state_variable): Download name also.
(remote_get_trace_status): Update parameter, use
parse_trace_status.
(remote_save_trace_data): New function.
(remote_upload_tracepoints): New function.
(remote_upload_trace_state_variables): New function.
(remote_get_raw_trace_data): New function.
(remote_start_remote): Use them.
(_initialize_remote_ops): Add operations.
* ax-gdb.c: Include breakpoint.h.
* breakpoint.c (create_tracepoint_from_upload): Use
break_command_really, return tracepoint, warn about unimplemented
parts.
* NEWS: Mention trace file addition.
* gdb.texinfo (Trace Files): New section.
(Tracepoint Packets): Document QTSave and qTBuffer.
(Trace File Format): New appendix.
* generic/gdbtk-bp.c (gdb_trace_status): Use current_trace_status.
* gdb.trace/tfile.c: New file.
* gdb.trace/tfile.exp: New file.
* ada-lang.c (find_parallel_type_by_descriptive_type):
Limit the fallback to name-based lookups to the case where
the type is a constrained packed array.
Support Valgrind attachments broken by the PIE support.
* auxv.c: Include gdbcore.h.
(procfs_xfer_auxv): Make static. Reduce its comment. Drop its
parameters ops, object and annex. Remove their assertions.
(ld_so_xfer_auxv, memory_xfer_auxv): New function.
* auxv.h (procfs_xfer_auxv): Remove comment. Rename to ...
(memory_xfer_auxv): ... here.
* linux-nat.c (linux_xfer_partial): Rename procfs_xfer_auxv to
memory_xfer_auxv.
* procfs.c (procfs_xfer_partial): Likewise.
* solib-svr4.c (svr4_relocate_main_executable): New prototype.
(svr4_special_symbol_handling): Call svr4_relocate_main_executable.
(svr4_solib_create_inferior_hook): Conditionalize the
svr4_relocate_main_executable call.
gdb/testsuite/
* gdb.base/valgrind-db-attach.exp, gdb.base/valgrind-db-attach.c: New.
* solib-svr4.c (scan_dyntag): Remove variable dyn_addr. New variable
target_section. Find SECT in current_target_sections, gdb_assert it.
(elf_lookup_lib_symbol): Pass the binary file if given symfile_objfile.
New variable abfd.
* symtab.c (lookup_objfile_from_block): Return the binary file instead
of separate debug info file.
gdb/testsuite/
* gdb.base/break-interp.exp (test_core): New proc.
(test_ld): Call it.
Support PIEs with no symfile_objfile.
* exec.c (print_section_info <abfd == exec_bfd>): Relocate Entry point.
* solib-svr4.c (svr4_relocate_main_executable <exec_bfd>): New block.
gdb/testsuite/
Support PIEs with no symfile_objfile.
* gdb.base/break-interp.exp: New argument at the test_ld calls.
(test_ld): New parameter trynosym.
(test_ld <$trynosym>): New block.
* solib-svr4.c (svr4_relocate_main_executable): Move the static exec
code part to ...
(svr4_static_exec_displacement): ... a new function.
(svr4_exec_displacement): New function.
(svr4_relocate_main_executable): Call svr4_exec_displacement. Allocate
new_offsets using alloca now. Remove variable old_chain and changed.
Call objfile_relocate unconditionally now.
gdb/testsuite/
* gdb.base/break-interp.exp: New file.
* machoread.c (macho_add_oso_symfile): Add symfile_flags parameter.
Call xstrdup for abfd->filename. Pass symfile_flags and objfile flags
to symbol_file_add_from_bfd. Add OSO as separate objfile.
(macho_oso_symfile): Add symfile_flags parameter. Pass it to
macho_add_oso_symfile.
(macho_symfile_read): Pass symfile_flags to macho_oso_symfile.
* dec-thread.c (dec_thread_ptid_is_alive): New function.
(dec_thread_count_gdb_threads): Fix counter increment.
(dec_thread_add_gdb_thread): Fix *listp increment.
(resync_thread_list): Fix bug in deletion of dead threads that
caused all threads to be deleted, instead of just the dead ones.
Add support for DW_AT_GNAT_descriptive_type.
* gdbtypes.h (enum type_specific_kind): New enum.
(struct main_type) [type_specific_field]: New component.
[type_specific]: Add new component "gnat_stuff".
(struct gnat_aux_type): New type.
(INIT_CPLUS_SPECIFIC): Also set TYPE_SPECIFIC_FIELD (type).
(HAVE_CPLUS_STRUCT): Also check TYPE_SPECIFIC_FIELD (type).
(gnat_aux_default, allocate_gnat_aux_type): Add declaration.
(INIT_GNAT_SPECIFIC, ALLOCATE_GNAT_AUX_TYPE, HAVE_GNAT_AUX_INFO)
(TYPE_SPECIFIC_FIELD): New macros.
(TYPE_CPLUS_SPECIFIC): Return cplus_struct_default if the given
type does not hold any cplus-specific data.
(TYPE_RAW_CPLUS_SPECIFIC): New macro.
(TYPE_GNAT_SPECIFIC, TYPE_DESCRIPTIVE_TYPE): New macros.
(TYPE_IS_OPAQUE): Use HAVE_CPLUS_STRUCT to check if type has
cplus-specific data.
* gdbtypes.c (allocate_cplus_struct_type): Minor stylistic rewrite.
Set new component TYPE_SPECIFIC_FIELD (type).
(gnat_aux_default): New constant.
(allocate_gnat_aux_type): New function.
(init_type): Add initialization the type-specific stuff for
TYPE_CODE_FLT and TYPE_CODE_FUNC types.
(print_gnat_stuff): New function.
(recursive_dump_type): Use HAVE_CPLUS_STRUCT to check for cplus-
specific data. Adjust code that prints the contents of the
type-specific union using the TYPE_SPECIFIC_FIELD value.
* dwarf2read.c (dwarf2_attach_fields_to_type): Do not allocate
the type cplus stuff for Ada types.
(dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
Error out if these routines are called with an Ada type.
(read_structure_type, read_array_type, read_subrange_type):
Add call to set_descriptive_type.
(set_die_type): Initialize the gnat-specific data if necessary.
(need_gnat_info, die_descriptive_type, set_descriptive_type):
New functions.
* ada-lang.c (decode_constrained_packed_array_type): Use
decode_constrained_packed_array_type instead of doing a standard
lookup to locate a parallel type.
(find_parallel_type_by_descriptive_type): New function.
(ada_find_parallel_type_with_name): New function.
(ada_find_parallel_type): Reimplement using
ada_find_parallel_type_with_name.
* ada-valprint.c (print_field_values): Use HAVE_CPLUS_STRUCT
to check if type has a cplus stuff.
* linespec.c (total_number_of_methods): Likewise.
* mdebugread.c (new_type): Likewise.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Adjust the expected output for the
"maint print type" test. Use gdb_test_multiple instead of
gdb_sent/gdb_expect.
* objfiles.c (objfile_relocate1): Change the return type to int.
Describe the new return value. Return non-zero if data changed.
(objfile_relocate): New variable changed. Set it. Call
breakpoint_re_set depending on CHANGED.
Fix displacement of separate debug info files.
* objfiles.c (objfile_relocate): Rename to ...
(objfile_relocate1): ... here and make it static. Extend the comment.
(objfile_relocate): New function.
* solib-spu.c (spu_relocate_main_executable): Explicitly check if
SYMFILE_OBJFILE is NULL. Remove variables objfile and old_chain.
Remove following of SEPARATE_DEBUG_OBJFILE. new_offsets is now
allocated using alloca.
* symfile.c (copy_section_addr_info): Remove.
(build_section_addr_info_from_objfile): Make it global. New variables
addr_bit and mask, use them.
* symfile.h (build_section_addr_info_from_objfile): New prototype.
(copy_section_addr_info): Remove.
* procfs.c: #include "observer.h".
(procfs_inferior_created): New function, moving here the code
which unsets the syssgi syscall-exit notifications.
(procfs_create_inferior): Remove the code which unsets the syssgi
syscall-exit notifications. It is too early to do this here.
(_initialize_procfs): Attach the procfs_inferior_created observer.
* mips-tdep.c (mips_n32n64_return_value): Arrays whose size is
128 bits or smaller are returned the same way as structs
and unions of the the same size.
Move some symfile code into subroutines.
* symfile.h (relative_addr_info_to_section_offsets)
(addr_info_make_relative): New prototypes.
* symfile.c (default_symfile_offsets): Move a part to ...
(relative_addr_info_to_section_offsets): ... this new function.
(default_symfile_offsets): Call it.
(syms_from_objfile <!mainline && addrs && addrs->other[0].name>): Move
this part to ...
(addr_info_make_relative): ... this new function.
* target.h (enum trace_find_type): New enum.
(struct target_ops): New fields to_trace_init,
to_download_tracepoint, to_download_trace_state_variable,
to_trace_set_readonly_regions, to_trace_start, to_get_trace_status,
to_trace_stop, to_trace_find, to_get_trace_state_variable_value,
to_set_disconnected_tracing.
(target_trace_init): New macro.
(target_download_tracepoint): New macro.
(target_download_trace_state_variable): New macro.
(target_trace_start): New macro.
(target_trace_set_readonly_regions): New macro.
(target_get_trace_status): New macro.
(target_trace_stop): New macro.
(target_trace_find): New macro.
(target_get_trace_state_variable_value): New macro.
(target_set_disconnected_tracing): New macro.
* target.c (update_current_target): Inherit and set defaults for
tracepoint operations.
* tracepoint.c (default_collect): Make globally visible.
(target_is_remote): Remove, along with all calls.
(tvariables_info): Call target_get_trace_state_variable_value.
(remote_set_transparent_ranges): Remove.
(trace_start_command): Call target_trace_init,
target_download_tracepoint, etc.
(download_tracepoint): Remove.
(trace_stop_command): Simplify.
(stop_tracing): Call target_trace_stop.
(get_trace_status): Call target_get_trace_status.
(trace_status_command): Add case for targets that cannot trace.
(finish_tfind_command): Change to take numerical arguments, call
target_trace_find.
(trace_find_command): Update call to finish_tfind_command.
(trace_find_pc_command): Ditto.
(trace_find_tracepoint_command): Ditto.
(trace_find_line_command): Ditto.
(trace_find_range_command): Ditto.
(trace_find_outside_command): Ditto.
(set_disconnected_tracing_value): Call
target_set_disconnected_tracing.
* remote.c: Add protocol encoding bits from tracepoint.c.
(trace_error): Move from tracepoint.c.
(remote_get_noisy_reply): Ditto.
(free_actions_list_cleanup_wrapper): Ditto.
(free_actions_list): Ditto.
(remote_trace_init): New function.
(remote_download_tracepoint): New function.
(remote_download_trace_state_variable): New function.
(remote_trace_set_readonly_regions): New function.
(remote_trace_start): New function.
(remote_get_trace_status): New function.
(remote_trace_stop): New function.
(remote_trace_find): New function.
(remote_download_trace_state_variable): New function.
(remote_set_disconnected_tracing): New function.
(init_remote_ops): Add tracepoint operations.
* infcmd.c (detach_command): Ask whether to stop tracing.
* cli/cli-cmds.c (quit_command): Ditto.
* breakpoint.h (struct breakpoint): New field number_on_target.
* breakpoint.c (create_tracepoint_from_upload): New function.
(get_tracepoint_by_number_on_target): New function.
* remote.c (struct remote): New field disconnected_tracing.
(remote_disconnected_tracing_feature): New function.
(remote_protocol_features): Add DisconnectedTracing.
(struct uploaded_tp): New struct.
(uploaded_tps): New global.
(get_uploaded_tp): New function.
(find_matching_tracepoint): New function.
(remote_get_tracing_state): New function.
(remote_start_remote): Call it.
* tracepoint.c (disconnected_tracing): New global.
(trace_start_command): Initialize number_on_target.
(stop_tracing): New function, split out from...
(trace_stop_command): Call stop_tracing.
(get_trace_status): New function, split out from...
(trace_status_command): Call get_trace_status, add info on
disconnection behavior.
(disconnect_or_stop_tracing): New function.
(finish_tfind_command): Translate from number on target.
(trace_find_tracepoint_command): Translate to number on target.
(send_disconnected_tracing_value): New function.
(set_disconnected_tracing): New function.
(_initialize_tracepoint): Add disconnected-tracing variable.
* NEWS: Mention disconnected tracing.
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
disconnected tracing.
(Tracepoint Packets): Document new protocol.
* symtab.c (lookup_global_symbol_from_objfile): Rename objfile
parameter to main_objfile. Iterate on all separate debug objfiles.
* symfile.h (symbol_file_add_separate)
(find_separate_debug_file_by_debuglink): Remove parameter names.
* symfile.c (symbol_file_add_separate): Use add_separate_objfile.
(reread_symbols): Use free_objfile_separate_debug.
* objfiles.h (struct objfile): Add separate_debug_objfile_link.
Adjust comment.
(objfile_separate_debug_iterate, add_separate_debug_objfile)
(free_objfile_separate_debug): New prototypes.
* objfiles.c (objfile_separate_debug_iterate): New function.
(add_separate_debug_objfile, free_objfile_separate_debug): New
functions.
(free_objfile): Use free_objfile_separate_debug. Adjust for
multiple separate debug objfile.
(objfile_has_symbols): Adjust comment. Iterate on all separate
debug objfiles.
* minsyms.c (lookup_minimal_symbol): Adjust for multiple separate
debug objfile.
(lookup_minimal_symbol_text): Ditto.
(lookup_minimal_symbol_by_pc_name): Ditto.
(lookup_minimal_symbol_solib_trampoline): Ditto.
(lookup_minimal_symbol_by_pc_section_1): Iterate on all separate
debug objfiles.
* gdbtypes.c (check_typedef): New comment on type length.
* value.c (allocate_value_lazy): Remove the unused atype variable. New
comment on type length.
(value_primitive_field): Keep the original TYPE value, new comment.
gdb/testsuite/
* gdb.mi/var-cmd.c (do_bitfield_tests): Change "V.sharable" type to
"uint_for_mi_testing".
* valarith.c (value_equal_contents): New function.
* value.h (value_equal_contents): Declare.
* breakpoint.c (watchpoint_check): Use value_equal_contents
instead of value_equal.
gdb/testsuite/
* gdb.base/watchpoint.exp (test_watchpoint_in_big_blob): New function.
(top level): Call test_watchpoint_in_big_blob.
* gdb.base/watchpoint.c (buf): Change size to value too big for hardware
watchpoints.
(func3): Write to buf.
Add trace state variables.
* ax.h (enum agent_op): Add getv, setv, and tracev.
(ax_tsv): Declare.
* ax-gdb.c: Include tracepoint.h.
(gen_expr): Handle BINOP_ASSIGN, BINOP_ASSIGN_MODIFY, and
OP_INTERNALVAR.
(gen_expr_binop_rest): New function, split from gen_expr.
* ax-general.c (ax_tsv): New function.
(aop_map): Add new bytecodes.
* tracepoint.h (struct trace_state_variable): New struct.
(tsv_s): New typedef.
(find_trace_state_variable): Declare.
* tracepoint.c (tvariables): New global.
(next_tsv_number): New global.
(create_trace_state_variable): New function.
(find_trace_state_variable): New function.
(delete_trace_state_variable): New function.
(trace_variable_command): New function.
(delete_trace_variable_command): New function.
(tvariables_info): New function.
(trace_start_command): Download tsvs with initial values.
(_initialize_tracepoint): Add new commands.
* NEWS: Mention the addition of trace state variables.
==> doc/ChangeLog <==
2009-12-28 Stan Shebs <stan@codesourcery.com>
* gdb.texinfo (Trace State Variables): New section.
(Tracepoint Packets): Describe trace state variable packets.
* agentexpr.texi (Bytecode Descriptions): Describe trace state
variable bytecodes.
==> testsuite/ChangeLog <==
2009-12-28 Stan Shebs <stan@codesourcery.com>
* gdb.trace/tsv.exp: New file.
* gdb.base/completion.exp: Update ambiguous info output.
prototypes.
* printcmd.c (print_address_symbolic): Take a gdbarch argument.
Pass it to build_address_symbolic. All callers updated.
(build_address_symbolic): Take a gdbarch argument. Use
gdbarch_addr_bits_remove for functions. All callers updated.
* breakpoint.c (bpstat_stop_status): Iterate using ALL_BREAKPOINTS and
the B->LOC list. Remove gdb_assert on B. Change bp_hardware_watchpoint
continue to break. Remove variable update_locations. Remove HIT_COUNT
increment protection by an ENABLE_STATE check. Inline the delayed
update_global_location_list call.
gdb/testsuite/
* gdb.base/condbreak.exp: Put breakpoint on marker3 and marker4.
(bp_location13, bp_location14, bp_location17, bp_location18)
(marker3_proto, marker4_proto): New variables.
(breakpoint info): Update output.
(run until breakpoint at marker3, run until breakpoint at marker4): New
tests.
* breakpoint.c (bpstat_stop_status): Check BL->SHLIB_DISABLED.
(print_breakpoint_location): New comment. Check LOC->SHLIB_DISABLED.
Check LOC validity before printing it. Use LOC instead of B->LOC.
Swap the if conditionals order.
gdb/testsuite/
* gdb.base/unload.c (main): Change the UNLOADSHR parameter to 1.
Replace the printf call of Y by provided "y-set-1" label. New block
for the second shared library.
* gdb.base/unload.exp: Compile also the second library, call
gdb_load_shlibs also for it. Use now gdb_breakpoint.
(single pending breakpoint info): Rename to ...
(pending breakpoint info before run): ... this extended test.
(libfile2, libname2, libsrcfile2, libsrc2)
(lib_sl2): New variables.
(exec_opts): Set also SHLIB_NAME2.
(pending breakpoint info on first run at shrfunc1)
(pending breakpoint info on second run at shrfunc1)
(pending breakpoint info on second run at shrfunc2)
(print y from libfile, print y from libfile2): New tests.
* gdb.base/unloadshr.c (shrfunc1): Change the returned value.
* gdb.base/unloadshr2.c: New.
* record.c (record_message): Change argument.
(record_message_wrapper): New function.
(do_record_message): Change it name to
"record_message_wrapper_safe".
Let it call "record_message_wrapper".
(record_resume_error): Deleted.
(record_resume): Call "record_message".
(record_wait): Deleted record_resume_error.
Call "record_message_wrapper_safe".
Set status when do_record_message need stop the inferior.
2009-12-22 Hui Zhu <teawater@gmail.com>
* gdb.reverse/sigall-reverse.exp: Adjust.
* linux-nat.c (kill_lwp): Minor cleanup, move definition of
tkill_failed into ifdef HAVE_TKILL_SYSCALL. Move setting of errno
there too. Delete unnecessary resetting of errno after syscall.
Minor comment changes to match gdbserver/linux-low.c:kill_lwp.
gdbserver/
* linux-low.c (kill_lwp): Use __NR_tkill instead of SYS_tkill.
Move definition of tkill_failed to ifdef __NR_tkill to avoid gcc
warning ifndef __NR_tkill. Move setting of errno there too.
Delete unnecessary resetting of errno after syscall.
Minor comment changes to match gdb/linux-nat.c:kill_lwp.
(ARM_LDR_PC_SP_12): Likewise.
(arm_linux_restart_syscall_init): New function.
(arm_linux_restart_syscall_tramp_frame): New variable.
(arm_linux_init_abi): Install the
arm_linux_restart_syscall_tramp_frame unwinder.
* gdb_proc_service.h (psaddr_t): Fix type.
* linux-thread-db.c (thread_db_info.td_thr_tls_get_addr_p): Fix
signature to match glibc.
(thread_db_get_thread_local_address): Use psaddr_t for type of
address to match parameter of td_thr_tls_get_addr_p.
Cast through psaddr_t instead of (void*) to match parameter of
td_thr_tls_get_addr_p.
gdbserver/
* gdb_proc_service.h (psaddr_t): Fix type.
* thread-db.c (thread_db_info.td_thr_tls_get_addr_p): Fix
signature to match glibc.
fields to allow larger integer sizes.
(read_subrange_type): Increase size of bound values.
Add logic to determine signedness based on base-type size, signedness.
(read_attribute_value): Change format for bad byte size in message.
(read_8_bytes): Increase size of result type.
(dump_die_shallow): Change format for value.
(dwarf2_get_attr_constant_value): Increase size of return type.
Correct comment.
* gdbtypes.c (create_range_type): Change API to increase size of
bounds. struct field -> union field.
Always take signedness from base type.
(check_typedef): Use new API for TYPE_LOW_BOUND, TYPE_HIGH_BOUND.
(recursive_dump_type, copy_type_recursive): Adjust to new
representation of range types.
* gdbtypes.h (fields_or_bounds): New union containing struct field and
new struct range_bounds, used for range types.
(TYPE_RANGE_DATA): New macro to access range_bounds member.
(TYPE_LOW_BOUND, TYPE_HIGH_BOUND): Represent with new TYPE_RANGE_DATA.
(TYPE_LOW_BOUND_UNDEFINED, TYPE_HIGH_BOUND_UNDEFINED): New macros,
taking over the job of TYPE_FIELD_ARTIFICIAL for range bounds.
(SET_TYPE_LOW_BOUND, SET_TYPE_HIGH_BOUND, SET_TYPE_LOW_BOUND_DEFINED)
(SET_TYPE_HIGH_BOUND_DEFINED): New macros.
(TYPE_FIELDS, TYPE_BASECLASS, TYPE_BASECLASS_NAME, TYPE_FIELD)
(TYPE_ARRAY_UPPER_BOUND_IS_UNDEFINED)
(TYPE_ARRAY_LOWER_BOUND_IS_UNDEFINED, TYPE_ARRAY_UPPER_BOUND_VALUE)
(TYPE_ARRAY_LOWER_BOUND_VALUE): Adjust to new representation.
(create_range_type): Adjust API.
* ada-lang.c (ada_modulus): Use new extended bound values.
(discrete_type_low_bound): Rename to...
(ada_discrete_type_low_bound): ... and make external.
(discrete_type_high_bound): Rename to...
(ada_discrete_type_high_bound): ... and make external.
(ada_value_slice_from_ptr, ada_array_bound_from_type)
(ada_evaluate_subexp, to_fixed_range_type):
Use ada_discrete_type_low_bound, ada_discrete_type_high_bound.
* ada-typeprint.c (print_range): Use ada_discrete_type_low_bound,
ada_discrete_type_high_bound. Don't look at field count, which
is no longer meaningful. Print bounds whenever argument is a range
or enumeration.
* ada-lang.h (ada_discrete_type_low_bound,ada_discrete_type_high_bound):
Declare.
* varobj.c (c_describe_child): Adjust to render larger values.
* mdebugread.c (parse_type): Use proper abstractions for range types:
TYPE_RANGE_DATA, SET_TYPE_LOW_BOUND_DEFINED,
SET_TYPE_HIGH_BOUND_DEFINED.
* p-typeprint.c (pascal_type_print_varspec_prefix): Use larger format
for bounds.
* i386-tdep.c: Support for floating point recording.
Records and Replay the i386 floating point registers,
of i387 FPU.
(i386_record_floats): New function.
(i386_process_record): Implement FP insns.
* symfile.h (symbol_file_add_separate): New prototype.
(find_separate_debug_file_by_buildid): Ditto.
(find_separate_debug_file_by_debuglink): Ditto.
* symfile.c (reread_separate_symbols): Remove.
(find_separate_debug_file): Split into ...
(find_separate_debug_file_by_buildid): ... this and ...
(find_separate_debug_file_by_debuglink): ... this.
(symbol_file_add_with_addrs_or_offsets): Do not save orig_addrs.
Remove separate debug file handling.
(symbol_file_add_separate): New function.
(reread_symbols): Do not considere separate debug files, but free
them while handling their parent. Reindent.
* coffread.c (coff_symfile_read): Handle separate object file.
* elfread.c (elf_symfile_read): Ditto.
PR python/10804
* python/py-type.c (typy_range): New Function.
2009-12-08 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-type.exp (test_range): New test.
2009-12-08 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Types In Python): Describe range function.
* dbxread.c (dbx_symfile_read): No need to test mainline to call
init_psymbol_list.
* xcoffread.c (xcoff_initial_scan): Ditto;
* coffread.c (coff_symfile_read): Remove call to init_psymbol_list.
* elfread.c (elf_symfile_read): Ditto.
* machoread.c (macho_symfile_read): Ditto.
2009-12-03 Paul Pluzhnikov <ppluzhnikov@google.com>
PR gdb/11022
* breakpoint.c (invalidate_bp_value_on_memory_change):
New function.
(_initialize_breakpoint): Add it as memory change observer.
testsuite/ChangeLog:
2009-12-03 Paul Pluzhnikov <ppluzhnikov@google.com>
PR gdb/11022
* gdb.base/pr11022.exp: New test.
* gdb.base/pr11022.c: New test.
* s390-nat.c (s390_can_use_hw_breakpoint): Only support breakpoints
of type bp_hardware_watchpoint.
gdb/testsuite/
* gdb.base/hbreak.exp: Disable for s390*-*-* targets.
* gdb.base/watchpoint-hw-hit-once.exp: Likewise.
* gdb.threads/watchthreads-reorder.exp: Likewise.
* breakpoint.c (find_condition_and_thread): Correct task error message.
* c-exp.y (yylex): Stop before "thread N", "task N", or abbreviations
of those.
doc/
* gdb.texinfo (Thread-Specific Breakpoints): Thread specifiers
are allowed after the breakpoint condition.
testsuite/
* gdb.base/condbreak.exp: Test combinations of "break *EXP",
"if", and "thread". Correct matching in the previous test.
reading the selected frame if there's no execution.
(bpstat_stop_status): Use is_hardware_watchpoint. If not
stopping, update watchpoints and the global location list, instead
of removing and inserting all breakpoints.
(breakpoint_address_is_meaningful): Hardware watchpoints also have
a meaningful target address.
(watchpoint_locations_match): New.
(breakpoint_locations_match): New.
(watch_command_1): Create the watchpoint breakpoint without any
location initially. Use update_watchpoint to create the
watchpoint locations.
(update_global_location_list): Use breakpoint_locations_match, so
watchpoint locations are handled too. Also detect duplicate
watchpoint locations.
* breakpoint.h (struct breakpoint) <watchpoint_thread>: New field.
* breakpoint.c (watchpoint_in_thread_scope): New.
(update_watchpoint): Skip if the local watchpoint's thread doesn't
match the current thread, or if the current thread is running.
(watchpoint_check): Ditto.
(watch_command_1): Set the watchpoint's watchpoint_thread field.
gdb/testsuite/
* gdb.threads/local-watch-wrong-thread.c,
gdb.threads/local-watch-wrong-thread.exp: New files.
* breakpoint.c (bp_location_compare): Change parameter a to ap and b to
bp. New variables a and b.
(bp_location_compare_for_qsort): Remove.
(update_global_location_list): Use now bp_location_compare.
* target.h (struct target_ops): New methods to_get_bookmark
and to_goto_bookmark.
(target_get_bookmark): New macro.
(target_goto_bookmark): New macro.
* target.c (dummy_get_bookmark): New function, default implementation.
(dummy_goto_bookmark): New function, default implementation.
(update_current_target): Inherit new methods.
* record.c (record_get_bookmark): New function.
(record_goto_bookmark): New function.
(init_record_ops): Set to_get_bookmark and to_goto_bookmark methods.
* reverse.c (struct bookmark): New type.
(save_bookmark_command): New function (command).
(delete_bookmark_command): New function (command).
(goto_bookmark_command): New function (command).
(bookmarks_info): New function (command).
(_initialize_reverse): Add new bookmark commands.
* command.h (enum command_class): Add class_bookmark.
* NEWS: Mention bookmark commands.
never random signals.
* breakpoint.c (update_global_location_list): Always delete
immediately delete hardware watchpoint locations and other
locations whose target address isn't meaningful. Update comment
explaining the hazard of moribund locations.
* ada-lang.c (ada_type_match): Stop making TYPE_CODE_VOID
a wildcard matching any type. For types that we don't already
handle specifically, make sure that both types have the same code.
(find_old_style_renaming_symbol): Add handling for function suffixes
present in the name of various procedures.
Do not overwrite the function symbol's name.
2009-11-17 Vladimir Prus <vladimir@codesourcery.com>
* Makefile.in (reg-cf.o, reg-cf.c): New targets.
* configure.ac: Check for __mcoldfire__ and set
gdb_cv_m68k_is_coldfire.
* configure.srv: Use gdb_cv_m68k_is_coldfire to select between
reg-cf.o and reg-m68k.o.
* configure: Regenerated.
2009-11-17 Nathan Sidwell <nathan@codesourcery.com>
* regformats/reg-cf.dat: New file.
event, check if the bpstat causes a stop, instead of if it
explains the signal.
* breakpoint.c (bpstat_causes_stop): New.
* breakpoint.h (bpstat_causes_stop): Declare.
the pspace doesn't allow breakpoints.
(insert_breakpoint_locations): Remove waiting_for_vfork_done
special case. Expect watchpoints that shouldn't be inserted, to
not be inserted.
* progspace.h (struct program_space) <breakpoints_not_allowed>:
New field.
* infrun.c (handle_inferior_event): Clear it.
* linux-nat.c (linux_child_follow_fork): Set it.
Maxim Kuvyrkov <maxim@codesourcery.com>
* remote-fileio.c (remote_fileio_request): Send Ctrl-C if it is
pending.
* remote-fileio.h: Update the prototype for remote_fileio_request.
* remote.c (struct remote_state): Add ctrlc_pending_p.
(remote_open_1): Clear ctrlc_pending_p.
(remote_stop_as): Set ctrlc_pending_p to 1.
(remote_wait_as): Pass ctrlc_pending_p to remote_fileio_request.
(dcache_struct): Delete member newest.
(block_func): New typedef.
(append_block, remove_block, for_each_block): New functions.
(invalidate_block, free_block): New functions.
(dcache_invalidate): Update
(dcache_invalidate_line, dcache_alloc): Update to use new list
accessors.
(dcache_free): Ditto. Fix memory leak.
Paul Brook <paul@codesourcery.com>
* c-typeprint.c (c_type_print_base): Skip artificial fields.
Use get_vptr_fieldno to skip the vtable pointer.
* dwarf2read.c (dwarf2_add_field): Set FIELD_ARTIFICIAL on artificial
fields.
(dwarf2_add_member_fn): Complain about virtual member functions
without DW_AT_vtable_elem_location and force TYPE_CPLUS_DYNAMIC.
* gdbtypes.c (get_vptr_fieldno): Update comment.
* gdbtypes.h (struct cplus_struct_type): Add is_dynamic.
(TYPE_CPLUS_DYNAMIC): New macro.
* gnu-v3-abi.c (gnuv3_dynamic_class): New.
(gnuv3_get_vtable): Rewrite to use gnuv3_dynamic_class. Move higher.
(gnuv3_rtti_type, gnuv3_get_virtual_fn, gnuv3_baseclass_offset): Use
gnuv3_get_vtable.
* varobj.c (cplus_class_num_children, cplus_describe_child): Skip
artificial fields. Use get_vptr_fieldno to skip the vtable pointer.
Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2read.c (dwarf2_add_member_fn): Calculate virtual function
offset for classes without DW_AT_containing_type.
Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2read.c (struct field_info): Add baseclasses.
(dwarf2_add_field): Add base classes to a separate list.
(dwarf2_attach_fields_to_type): Merge base classes and fields.
(OPERATOR): New token.
(NEW): New token.
(DELETE): New token.
(operator): New rule.
(name): Add operator.
(ident_tokens): Add "new", "delete", and "operator".
* gdbtypes.c (rank_one_type): Don't complain about
void pointer conversion badness if both types are
void pointers.
* symfile.c (separate_debug_file_exists): Change parameter parent_name
to parent_objfile. New variables parent_stat and abfd_stat. Call
strcmp and then bfd_stat functions to verify if NAME matches.
(find_separate_debug_file): Update the passed parameter at caller.
* eval.c (make_params): New function.
(free_param_types): New function.
(evaluate_subexp_standard): Pass expect_type to value_aggregate_elt.
Handle case TYPE_INSTANCE.
(evaluate_subexp_for_address): Pass expect_type to value_aggregate_elt.
* expression.h (enum exp_opcode): Add TYPE_INSTANCE.
(compare_parameters): Add declaration.
* parse.c (operator_length_standard): Add TYPE_INSTANCE.
* valops.c (value_aggregate_elt): Add new expect_type parameter.
Pass expect_type to value_struct_elt_for_reference.
(value_struct_elt_for_reference): Add expect_type parameter and use
compare_parameters.
Check for overload matches with and without artificial parameters.
Skip artificial methods.
(compare_parameters): New function.
* value.h (value_aggregate_elt): Add new expect_type parameter.
* procfs.c (procfs_do_thread_registers): Added a call to fetch
register values before saving them in the core file
through the gcore command.
(procfs_corefile_thread_callback): Removed the backup of
inferior_ptid before calling procfs_do_thread_registers since
the function already saves and restores it before returning.
has_ranges_offset.
(struct partial_die_info): Remove language, has_stmt_list, dirname,
and line_offset.
(dwarf2_build_include_psymtabs): Take a die_info. Handle a missing
line table.
(dwarf2_get_pc_bounds): Take PST argument. Pass it
to dwarf2_ranges_read. Update all callers.
(init_cu_die_reader): Move earlier.
(dwarf2_find_base_address): New function.
(process_psymtab_comp_unit): Rewrite to use a full DIE for the
compilation unit. Use dwarf2_get_pc_bounds and
dwarf2_find_base_address.
(load_comp_unit): Rewrite to use a full DIE for the compilation unit.
(process_full_comp_unit): Use dwarf2_find_base_address.
(read_partial_die): Remove support for attributes only used
in the compilation unit DIE.
* symfile.c (allocate_psymtab): Make FILENAME const.
(start_psymtab_common): Likewise.
* symfile.h (allocate_psymtab, start_psymtab_common): Update
prototypes.
* symfile.c (allocate_symtab): Don't use obsavestring on a
constant string.
* stabsread.c (define_symbol): Don't use obsavestring on a
constant string.
* mdebugread.c (parse_type): Don't use obsavestring on a constant
string.
(new_symtab): Likewise.
* elfread.c (elf_symtab_read): Don't use obsavestring on a
constant string.
* symfile.c (build_id_to_debug_filename): New variable debugdir. Move
variables size, s and data into a new inner block. Change xmalloc for
alloca, use direct BUILDID->SIZE there now. Loop for the
DEBUG_FILE_DIRECTORY components.
(find_separate_debug_file): New variable debugdir and debugdir_end.
Loop for the DEBUG_FILE_DIRECTORY components.
(_initialize_symfile): For "debug-file-directory" use plural and note
one can use multiple components now.
gdb/doc/
* gdb.texinfo (set debug-file-directory, show debug-file-directory)
(Auto-loading): Use plural and note one can use multiple components now.
gdb/testsuite/
* gdb.base/sepdebug.exp: New test_different_dir call for multiple-dirs.
* symfile.c (find_separate_debug_file): Initialize dir, debugfile and
canon_name to NULL. Change alloca to xmalloc, newly call xfree for it.
New label cleanup_return_debugfile, jump to it from the failure paths.
* symfile.c (separate_debug_file_exists): When the CRCs mismatch
print a warning.
(find_separate_debug_file): Pass in the objfile's name.
gdb/testsuite/
* gdb.base/sepdebug.exp (CRC mismatch is reported): New test.
* gdb.base/sepdebug2.c: New file.
Remove INVALID_ENTRY_POINT.
* frame.c (inside_entry_func): New variable entry_point. Return 0 if
the entry point is not known.
* solib-irix.c (enable_break): Likewise.
* objfiles.c (init_entry_point_info): Stop using INVALID_ENTRY_POINT.
Initialize EI.ENTRY_POINT_P.
(entry_point_address): Rename to ...
(entry_point_address_query): ... a new function. Use EI.ENTRY_POINT_P.
(entry_point_address): New function.
(objfile_relocate): Use EI.ENTRY_POINT_P.
* objfiles.h (struct entry_info): Simplify entry_point comment. New
field entry_point_p.
(INVALID_ENTRY_POINT): Remove.
(entry_point_address_query): New prototype.
* solib-frv.c (enable_break): Check for NULL SYMFILE_OBJFILE and its
EI.ENTRY_POINT_P. Return 0 if ".interp" is not found.
2009-31-10 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
* breakpoint.c (catch_syscall_split_args): Remove unecessary warning
displayed when the user provided a syscall name and there is no
XML support.
* xml-syscall.c: Renamed `_sysinfo' to `sysinfo'.
(set_xml_syscall_file_name): Remove syscall_warn_user.
(xml_init_syscalls_info): Remove warning.
(init_sysinfo): Update warnings.
gdb/testsuite/ChangeLog:
2009-31-10 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
* gdb.base/catch-syscall.exp: Adapt the testcase in order to accept
the modified warnings for catch syscall. Verify if GDB was compiled
with support for lib expat, and choose which tests to run depending
on this.
