files).
* (SUBDIRS): Remove mswin.
* Change procedure for creating init.c. Speeds things up quite a
bit.
* config.in configure configure.in: Check for select, poll.
* Check for OSF header files before including hpux-thread.o.
* Don't configure doc or testsuite when building under MSVC.
* findvar.c value.h (read_register_pid write_register_pid): Make
global. Needed for hppa-tdep.c.
* (supply_register): Don't set pid to inferior_pid when supplying
registers.
* hppa-tdep.c (saved_pc_after_call): frame_saved_pc ->
FRAME_SAVED_PC.
* (frame_saved_pc): Change name to hppa_frame_saved_pc.
* (hppa_pop_frame): Don't use a pid of 0 with target_write_pc.
Use write_pc instead, which uses the correct pid.
* (target_read_pc target_write_pc): Use read/write_register_pid
instead of read/write_register to preserve the pid passed in.
* inftarg.c (child_can_run): Add flag child_suppress_run to allow
hpux-threads.c to override this as a runnable target.
* config/pa/nm-hppah.h: Define target_new_objfile and
target_pid_to_str.
* config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc
instead of frame_saved_pc.
* config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb.
* config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since
we can't easily determine the start file bounds with ELF.
* config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb.
* hpux-thread.c: New file for HPUX/OSF thread support.
* osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h
RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h
cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h
cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h
cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF
thread support.
grow up correctly.
* config/pa/tm-hppa.h (USE_STRUCT_CONVENTION): Define.
(STACK_ALIGN): Define.
* hppa-tdep.c (hppa_alignof): Don't demand a minumim two byte
alignment on structs/unions.
Fixing assorted structure passing/return problems reported by the net.
Thu Jul 25 19:41:31 1996 Fred Fish <fnf@cygnus.com>
for details about these changes. I was going to include the complete
entry in the checkin message but it was apparently so large it caused
cvs to dump core.
and MMALLOC_CHECK macros, and add comment indicating how host dependent
makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or
to use it but to not do heap corruption checking.
* gdbserver/Makefile.in: Ditto.
* utils.c (init_malloc): Replace warning() use with direct call of
fprintf_unfiltered, since current_target has not yet been set and thus
we cannot use warning(). If we try to use mmcheck and it fails,
suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE
defined. Other small mmalloc related cleanups.
* config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
* config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK.
* config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT);
* config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
Remove obsolete defines.
* config/alpha/alpha-linux.mh (MMALLOC_DISABLE):
* config/alpha/alpha-osf1.mh (MMALLOC_DISABLE):
* config/rs6000/rs6000.mh (MMALLOC_DISABLE):
* config/rs6000/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix.mh (MMALLOC_DISABLE):
* config/ns32k/ns32km3.mh (MMALLOC_DISABLE):
* config/mips/mipsm3.mh (MMALLOC_DISABLE):
* config/mips/decstation.mh (MMALLOC_DISABLE):
* config/m88k/cxux.mh (MMALLOC_DISABLE):
* config/i386/i386mk.mh (MMALLOC_DISABLE):
* config/i386/i386m3.mh (MMALLOC_DISABLE):
* config/i386/i386gnu.mh (MMALLOC_DISABLE):
Use MMALLOC_CFLAGS instead.
Also force HAVE_MMAP to be defined since autoconf is currently broken
for detecting a working mmap under hpux.
* config/pa/xm-hppah.h (MMAP_BASE_ADDRESS): Tweak MMAP_BASE_ADDRESS
to a better value suggested by Jeffrey A Law (law@cygnus.com).
S-record download code into srec.c.
* srec.c srec.h: New files. Contain S-record loading routines
formerly in monitor.c.
* serial.c serial.h: New routine just like fprintf, but uses
serial_t instead of FILE *.
* sh-tdep.c (frame_find_saved_regs init_extra_frame_info):
Don't add four to saved pc (makes things match manual). Also, fix
bug where we didn't get pc from stack frame correctly.
* config/sh/tm-sh.h (SAVED_PC_AFTER_CALL): Don't add four to
saved pc. Real hardware does this for you.
* sh3-rom.c (sh3_load): New routine. Sets up for download then
calls generic S-record loader.
* config/h8300/h8300.mt, config/h8500/h8500.mt,
config/m68k/monitor.mt, config/pa/hppapro.mt, config/sh/sh.mt:
Add srec.o to TDEPFILES.
* config/pa/hppahpux.mh: Remove hardcoding of X locations.
* Makefile.in: Use X11_CFLAGS, X11_LDFLAGS and X11_LIBS.
* configure.in: Link X statically on Solaris, SunOS and HPUX.
problems than it fixes.
* hppa-tdep.c (skip_prologue): If we exit the main loop without
finding all the register saves, retry again without looking for
the registers we could not find the first time.
Better fix for 7768.
* gdbserver/Makefile.in (SFILES): Add low-hppabsd.c.
* config/hppabsd.mh (XDEPFILES): Add ser-tcp.o
(GDBSERVER_DEPFILES): Add low-hppabsd.o
* config/hppaosf.mh: LIkewise.
Needed this for the gdbserver framework development. Trying to avoid doing
development work on lynx for the obvious reasons.
(INSTRUCTION_NULLIFIED): Allow specific targets to override.
* config/pa/tm-hppao.h (INSTRUCTION_NULLIFIED): Define to work
around losing mach kernel behavior.
target.h.
* target.h: Macros from breakpoint.c. Conditionalize based on
TARGET_HAS_HARDWARE_WATCHPOINTS.
* i386v-nat.c procfs.c: Use TARGET_HAS_HARDWARE_WATCHPOINTS
instead of TARGET_CAN_USE_HARDWARE_WATCHPOINT to enable watchpoint
code.
* config/i386/nm-linux.h, config/mips/nm-irix4.h,
config/pa/nm-hppab.h, config/sparc/tm-sparclite.h: #define
TARGET_HAS_HARDWARE_WATCHPOINTS to enable watchpoint code.
constants into PA instructions.
* Put #ifdefs around all signal handling code. Not generally
needed for embedded boards.
* (hppa_fix_call_dummy): Parameterize offsets into call dummy to
allow different dummys to be used by this code. Use
INSTRUCTION_SIZE instead of REGISTER_SIZE for things.
Conditionalize setup of _sr4export fixup. Improve comments.
* config/pa/tm-hppa.h: Define INSTRUCTION_SIZE. Use a different
call dummy if PA_LEVEL_0 is defined. Better comments for call
dummys. Define offsets for LDIL/LDO instructions which load
function addresses.
* config/pa/tm-pro.h: Get rid of signal handling stuff. Define
PA_LEVEL_0 to disable mucking with space regs and such.
unnecessary remoteloadprotocol and remoteloadtype support.
* (expect expect_prompt): Change names to monitor_expect and
monitor_expect_prompt. Make them global.
* (printf_monitor): Change name to monitor_printf. Make global.
* (monitor_read_memory): Flush command echo to avoid parsing
ambiguity with CPU32Bug monitor.
* (monitor_load): Remove remoteloadprotocol and remoteloadtype
support. Call target_ops->load_routine, default to
monitor_load_srec.
* (monitor_load_srec): Remove everything but S-record support.
* monitor.h (monitor_ops): Add load_routine to provide monitor
specific download capability.
* remote-est.c: Clean up copyrights and comments.
* w89k-rom.c: Use new xmodem support.
* xmodem.c xmodem.h: New files to support xmodem downloads.
* rom68k-rom.c remote-est.c: Fix copyrights, add load_routine
entry to monitor_ops.
* cpu32bug-rom.c: New file to support Moto BCC debuggers.
* config/m68k/est.mt (TDEPFILES): Add cpu32bug.o.
* config/pa/hppapro.mt (TDEPFILES): Add xmodem.o.
* Makefile.in (gdbtk.o): Use X11_CFLAGS to provide alternate
locations (per-host) for X11 include files.
* config/pa/hppahpux.mh (XM_CLIBS): Add -L/usr/lib/X11R5 to force
the use of R5 libs. (X11_CFLAGS): Add this to indicate the locs
of the R5 include files.
end-sanitize-gdbtk
* monitor.c monitor.h remote-est.c rom68k-rom.c: Add start of
support for interrupting target.
* monitor.c (monitor_open): Send stop command before doing
anything else.
* (monitor_load_srec): Fix record size calculation to prevent end
of segment from getting trashed.
* rom68k-rom.c: Update to latest version of struct monitor_ops.
* config/sparc/tm-sparc.h (FIX_CALL_DUMMY): Fix byte-order
problems. Makes DOS hosted function calling work.
* sparclite/crt0.s: Define _start to make COFF happy.
* testsuite/config/rom68k.exp (gdb_target_rom68k): Use
$targetname, $serialport and $baud instead of hardwired variables.
* testsuite/gdb.base/{sigall.exp signals.exp}: Skip these if the
target doesn't support signals.
Various name changes to match those used by hp-symtab.h.
No longer sanitize away hpread changes. Merge ChangeLog.hpread into
ChangeLog and ChangeLog-93.
symbol special handling when INHIBIT_SUNSOLIB_TRANSFER_TABLE_HACK
is defined.
* infrun.c (IN_SOLIB_CALL_TRAMPOLINE): Renamed from
IN_SOLIB_TRAMPOLINE. All callers changed.
(IN_SOLIB_RETURN_TRAMPOLINE): Provide default definition.
(wait_for_inferior): Handle single stepping through trampolines on
return paths from shared libraries.
* config/pa/tm-hppa.h (IN_SOLIB_CALL_TRAMPOLINE): Use
in_solib_call_trampoline.
(IN_SOLIB_RETURN_TRAMPOLINE): Use in_solib_return_trampoline.
(INHIBIT_SUNSOLIB_TRANSFER_TABLE_HACK): Define.
* hppa-tdep.c (in_solib_call_trampoline): New function.
(in_solib_return_trampoline): New function.
single frame backtracing within the library only. Only works when
using the HPUX 9 dynamic linker. More functionality to be added
soon.
* somsolib.c, somsolib.h: New files.
* Makefile.in (HFILES_NO_SRCDIR): Add somsolib.h
(ALLDEPFILES): Add somsolib.c.
(somsolib.o): Add some dependencies.
* mpw-make.in (HFILES_NO_SRCDIR): Add somsolib.h
(ALLDEPFILES): Add somsolib.c.
(somsolib.o): Add some dependencies.
* somread.c (som_symtab_read): Accept multiple section offsets.
All callers changed. Adjust all text symbols with the first
section offset.
* symfile.c (find_lowest_section): Enable this function. Add some
tie-breaking logic when sections have the same vma.
(syms_from_objfile): Use find_lowest_section rather than looking
for ".text" by name. Relax warning to only warn if the lowest
section is not a code section.
* config/pa/{hppabsd.mh, hppahpux.mh} (NATDEPFILES): Add somsolib.o
* config/pa/{nm-hppab.h, nm-hppah.h}: Include somsolib.h.
(hpread.o): Add dependencies.
* somread.c: Do not include "aout/aout64.h". SOM has nothing to
do with a.out.
(BYTES_IN_WORD): Delete.
(som_symfile_read): Call hpread_build_psymtabs to build any
minimal symbols based on the HP C native debug symbols.
(som_symfile_finish): Call hpread_symfile_finish.
(som_symfile_init): Call hpread_symfile_init.
* config/pa/tm-hppa.h (HPREAD_ADJUST_STACK_ADDRESS): Define.
* hppa-tdep.c (hpread_adjust_stack_address): New function.
* config/pa/hppabsd.mh (NATDEPFILES): Add hpread.o
* config/pa/hppahpux.mh (NATDEPFILES): Likewise.
* hpread.c: New file.
