This change:
commit b775012e84
Author: Luis Machado <luisgpm@br.ibm.com>
Date: Fri Feb 24 15:10:59 2012 +0000
2012-02-24 Luis Machado <lgustavo@codesourcery.com>
* remote.c (remote_supports_cond_breakpoints): New forward
declaration.
[...]
changed the way breakpoints are inserted and removed such that
`insert_bp_location' can now be called with the breakpoint being handled
already in place, while previously the call was only ever made for
breakpoints that have not been put in place. This in turn caused an
issue for software breakpoints and targets for which a breakpoint's
`placed_address' may not be the same as the original requested address.
The issue is `insert_bp_location' overwrites the previously adjusted
value in `placed_address' with the original address, that is only
replaced back with the correct adjusted address later on when
`gdbarch_breakpoint_from_pc' is called. Meanwhile there's a window
where the value in `placed_address' does not correspond to data stored
in `shadow_contents', leading to incorrect instruction bytes being
supplied when `one_breakpoint_xfer_memory' is called to supply the
instruction overlaid by the breakpoint.
And this is exactly what happens on the MIPS target with software
breakpoints placed in microMIPS code. In this case not only
`placed_address' is not the original address because of the ISA bit, but
`mips_breakpoint_from_pc' has to read the original instruction to
determine which one of the two software breakpoint instruction encodings
to choose as well. The 16-bit encoding is used to replace 16-bit
instructions and similarly the 32-bit one is used with 32-bit
instructions, to satisfy branch delay slot size requirements.
The mismatch between `placed_address' and the address data in
`shadow_contents' has been obtained from leads to the wrong encoding
being used in some cases, which in the case of a 32-bit software
breakpoint instruction replacing a 16-bit instruction causes corruption
to the adjacent following instruction and leads the debug session astray
if execution reaches there e.g. with a jump.
To address this problem I made the change below, that adds a
`reqstd_address' field to `struct bp_target_info' and leaves
`placed_address' unchanged once it has been set. This ensures data in
`shadow_contents' is always consistent with `placed_address'.
This approach also has this good side effect that all the places that
examine the breakpoint's address see a consistent value, either
`reqstd_address' or `placed_address', as required. Currently some
places see either the original or the adjusted address in
`placed_address', depending on whether they have been called before
`gdbarch_remote_breakpoint_from_pc' or afterwards. This is in
particular true for subsequent calls to
`gdbarch_remote_breakpoint_from_pc' itself, e.g. from
`one_breakpoint_xfer_memory'. This is also important for places like
`find_single_step_breakpoint' where a breakpoint's address is compared
to the raw value of $pc.
* breakpoint.h (bp_target_info): Add `reqstd_address' member,
update comments.
* breakpoint.c (one_breakpoint_xfer_memory): Use `reqstd_address'
for the breakpoint's address. Don't preinitialize `placed_size'.
(insert_bp_location): Set `reqstd_address' rather than
`placed_address'.
(bp_target_info_copy_insertion_state): Also copy `placed_address'.
(bkpt_insert_location): Use `reqstd_address' for the breakpoint's
address.
(bkpt_remove_location): Likewise.
(deprecated_insert_raw_breakpoint): Likewise.
(deprecated_remove_raw_breakpoint): Likewise.
(find_single_step_breakpoint): Likewise.
* mem-break.c (default_memory_insert_breakpoint): Use
`reqstd_address' for the breakpoint's address. Don't set
`placed_address' or `placed_size' if breakpoint contents couldn't
have been determined.
* remote.c (remote_insert_breakpoint): Use `reqstd_address' for
the breakpoint's address.
(remote_insert_hw_breakpoint): Likewise. Don't set
`placed_address' or `placed_size' if breakpoint couldn't have been
set.
* aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Use
`reqstd_address' for the breakpoint's address.
* arm-linux-nat.c (arm_linux_hw_breakpoint_initialize): Likewise.
* ia64-tdep.c (ia64_memory_insert_breakpoint): Likewise.
* m32r-tdep.c (m32r_memory_insert_breakpoint): Likewise.
* microblaze-linux-tdep.c
(microblaze_linux_memory_remove_breakpoint): Likewise.
* monitor.c (monitor_insert_breakpoint): Likewise.
* nto-procfs.c (procfs_insert_breakpoint): Likewise.
(procfs_insert_hw_breakpoint): Likewise.
* ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Likewise.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.
* remote-m32r-sdi.c (m32r_insert_breakpoint): Likewise.
* remote-mips.c (mips_insert_breakpoint): Likewise.
* x86-nat.c (x86_insert_hw_breakpoint): Likewise.
This patch updates arm native support for hwbreak-/watchpoints to enable
support for hwbreak-/watchpoints across fork/vfork. This involves changes to
hwbreak-/watchpoint insertion mechanism to the modern way, by marking debug
registers as needing update, but only really updating them on resume, which is
necessary for supporting watchpoints in non-stop mode. This also updates a
previously maintained per thread hwbreak-/watchpoint cache to a per process
cache which allows target specific code to come in sync with gdb-linux calls to
threads create/destroy and process fork/exit hooks.
This switches to_read_description to the "new normal" delegation
scheme. This one was a bit trickier than the other changes due to the
way that target_read_description handled delegation. I examined all
the target implementations of to_read_description and changed the ones
returning NULL to instead delegate.
2014-02-19 Tom Tromey <tromey@redhat.com>
* arm-linux-nat.c (arm_linux_read_description): Delegate when
needed.
* corelow.c (core_read_description): Delegate when needed.
* remote.c (remote_read_description): Delegate when needed.
* target-delegates.c: Rebuild.
* target.c (target_read_description): Rewrite.
* target.h (struct target_ops) <to_read_description>: Update
comment. Use TARGET_DEFAULT_RETURN.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* arm-linux-nat.c (arm_linux_hw_breakpoint_initialize): Do not
attempt to 4-byte-align HW breakpoint addresses for Thumb.
gdbserver/ChangeLog:
* linux-arm-low.c (arm_linux_hw_point_initialize): Do not attempt
to 4-byte-align HW breakpoint addresses for Thumb.
Code cleanup for the next patch.
* arm-linux-nat.c (arm_linux_stopped_data_address): Change variable
siginfo_p to siginfo, update its users incl. the linux_nat_get_siginfo
call for it.
* ia64-linux-nat.c (ia64_linux_stopped_data_address): Likewise.
(ia64_linux_stopped_data_address):
* linux-nat.c (linux_nat_get_siginfo): Add parameter siginfo, change
the return value.
* linux-nat.h (linux_nat_get_siginfo): Likewise.
* ppc-linux-nat.c (ppc_linux_stopped_data_address): Change variable
siginfo_p to siginfo, update its users incl. the linux_nat_get_siginfo
call for it.
* arm-tdep.h (gdb_regnum): Add ARM_FPSCR_REGNUM
* arm-linux-nat.c (arm_linux_vfp_register_count): New
variable.
(fetch_vfp_registers): New function to fetch VFP registers.
(store_vfp_registers): New function to store VFP registers.
(arm_linux_fetch_inferior_registers): Add support for VFP
registers.
(arm_linux_store_inferior_registers): Likewise.
(arm_linux_read_description): Likewise.
(_initialize_arm_linux_nat): Delay initialising iWMMX tdesc
until we need it.
(alpha-linux-nat.o, sparc-linux-nat.o): New rules.
(amd64-linux-nat.o, arm-linux-nat.o, hppa-linux-nat.o)
(i386-linux-nat.o, ia64-linux-nat.o, linux-nat.o, m32r-linux-nat.o)
(m68klinux-nat.o, mips-linux-nat.o, ppc-linux-nat.o, s390-nat.o)
(sparc64-linux-nat.o): Update dependencies.
* alpha-linux-nat.c, sparc-linux-nat.c: New files.
* amd64-linux-nat.c (amd64_linux_fetch_inferior_registers): Renamed
from fetch_inferior_registers and made static.
(amd64_linux_store_inferior_registers): Renamed from
store_inferior_registers and made static.
(amd64_linux_child_post_start_inferior): Renamed from
child_post_startup_inferior and made static. Call
super_post_startup_inferior.
(super_post_startup_inferior): New.
(_initialize_amd64_linux_nat): Set it. Call linux_target and
add_target.
* arm-linux-nat.c (arm_linux_fetch_inferior_registers): Renamed
from fetch_inferior_registers and made static.
(arm_linux_store_inferior_registers): Renamed from
store_inferior_registers and made static.
(_initialize_arm_linux_nat): Add a prototype. Use linux_target and
add_target.
* hppa-linux-nat.c (hppa_linux_fetch_inferior_registers): Renamed
from fetch_inferior_registers and made static.
(hppa_linux_store_inferior_registers): Renamed from
store_inferior_registers and made static.
(_initialize_hppa_linux_nat): New function.
* i386-linux-nat.c (i386_linux_fetch_inferior_registers): Renamed
from fetch_inferior_registers and made static.
(i386_linux_store_inferior_registers): Renamed from
store_inferior_registers and made static.
(i386_linux_resume): Renamed from child_resume and made static.
(i386_linux_child_post_start_inferior): Renamed from
child_post_startup_inferior and made static. Call
super_post_startup_inferior.
(super_post_startup_inferior): New.
(_initialize_i386_linux_nat): New function.
* i386-nat.c: Remove LINUX_CHILD_POST_STARTUP_INFERIOR #ifndef.
* ia64-linux-nat.c (ia64_linux_xfer_unwind_table): Remove.
(super_xfer_partial): New.
(ia64_linux_xfer_partial): New function. Use it.
(_initialize_ia64_linux_nat): New function.
* ia64-tdep.c (getunwind_table): Revert 2005-06-08 change; use
target_read_partial and document the problem.
* inf-ptrace.c (inf_ptrace_fetch_register): Use
CANNOT_FETCH_REGISTER. Fix some comments.
(inf_ptrace_store_register): Use CANNOT_STORE_REGISTER. Fix some
comments.
* linux-nat.c: Include "inf-ptrace.h" and "auxv.h".
(linux_ops, super_xfer_partial): New variables.
(linux_child_post_startup_inferior): Make static.
(child_post_startup_inferior): Delete.
(linux_nat_attach, linux_nat_detach, resume_callback)
(linux_nat_resume, linux_nat_wait, linux_nat_create_inferior)
(linux_nat_mourn_inferior): Use linux_ops instead of
deprecated_child_ops.
(child_wait): Do not depend on CHILD_WAIT.
(linux_nat_xfer_memory): Remove, replace by ...
(linux_nat_xfer_partial): ... this. Use linux_ops->to_xfer_partial
instead of linux_proc_xfer_memory and child_xfer_memory.
(linux_nat_fetch_registers, linux_nat_store_registers)
(linux_nat_child_post_startup_inferior): New functions.
(init_linux_nat_ops): Use the new functions.
(linux_proc_xfer_memory): Remove, replace by ...
(linux_proc_xfer_partial): ... this. Make static.
(linux_xfer_partial, linux_register_u_offset, linux_target): New
functions.
(_initialize_linux_nat): Do not modify deprecated_child_ops.
* linux-nat.h (linux_proc_xfer_memory): Remove prototype.
(struct mem_attrib, struct target_ops): Remove forward declarations.
(linux_child_post_startup_inferior): Remove prototype.
(linux_target): Add prototype.
* linux-thread-db.c (thread_db_xfer_memory): Remove, replace by ...
(thread_db_xfer_partial): ... this.
(init_thread_db_ops): Set to_xfer_partial instead of
deprecated_xfer_memory.
* m32r-linux-nat.c (m32r_linux_fetch_inferior_registers): Renamed
from fetch_inferior_registers and made static.
(m32r_linux_store_inferior_registers): Renamed from
store_inferior_registers and made static.
(_initialize_m32r_linux_nat): New function.
* m68klinux-nat.c (m68k_linux_fetch_inferior_registers): Renamed
from fetch_inferior_registers and made static.
(m68k_linux_store_inferior_registers): Renamed from
store_inferior_registers and made static.
(old_fetch_inferior_registers, old_store_inferior_registers): Made
static.
(_initialize_m68k_linux_nat): Use linux_target and add_target.
* mips-linux-nat.c (_initialize_mips_linux_nat): New function.
* ppc-linux-nat.c (ppc_linux_fetch_inferior_registers): Renamed
from fetch_inferior_registers and made static.
(ppc_linux_store_inferior_registers): Renamed from
store_inferior_registers and made static.
(_initialize_ppc_linux_nat): New function.
* s390-nat.c (s390_linux_fetch_inferior_registers): Renamed
from fetch_inferior_registers and made static.
(s390_linux_store_inferior_registers): Renamed from
store_inferior_registers and made static.
(_initialize_s390_nat): New function.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Use
linux_target and add_target.
* config/nm-linux.h: Don't include "auxv.h".
(struct target_waitstatus, child_wait, CHILD_WAIT)
(CHILD_PID_TO_EXEC_FILE, CHILD_INSERT_FORK_CATCHPOINT)
(CHILD_INSERT_VFORK_CATCHPOINT, CHILD_INSERT_EXEC_CATCHPOINT)
(CHILD_POST_STARTUP_INFERIOR, CHILD_POST_ATTACH, CHILD_FOLLOW_FORK)
(DEPRECATED_KILL_INFERIOR, NATIVE_XFER_AUXV): Delete.
* config/alpha/alpha-linux.mh (NATDEPFILES): Replace infptrace.o
and inftarg.o with inf-ptrace.o and alpha-linux-nat.o.
* config/sparc/linux.mh (NATDEPFILES): Replace infptrace.o and
inftarg.o with sparc-linux-nat.o.
* config/sparc/linux64.mh (NATDEPFILES): Remove infptrace.o and
inftarg.o.
* config/arm/linux.mh (NATDEPFILES): Replace infptrace.o and
inftarg.o with inf-ptrace.o.
* config/i386/linux.mh (NATDEPFILES): Likewise.
* config/i386/linux64.mh (NATDEPFILES): Likewise.
* config/ia64/linux.mh (NATDEPFILES): Likewise.
* config/m32r/linux.mh (NATDEPFILES): Likewise.
* config/m68k/linux.mh (NATDEPFILES): Likewise.
* config/mips/linux.mh (NATDEPFILES): Likewise.
* config/pa/linux.mh (NATDEPFILES): Likewise.
* config/powerpc/linux.mh (NATDEPFILES): Likewise.
* config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
* config/s390/s390.mh (NATDEPFILES): Likewise.
* config/i386/nm-linux.h (DEPRECATED_CHILD_RESUME): Don't define.
(LINUX_CHILD_POST_STARTUP_INFERIOR): Don't define.
* config/i386/nm-linux64.h (LINUX_CHILD_POST_STARTUP_INFERIOR):
Don't define.
* config/ia64/nm-linux.h: Don't include "target.h".
(NATIVE_XFER_UNWIND_TABLE, ia64_linux_xfer_unwind_table): Remove.
* config/djgpp/fnchange.lst: Add alpha-linux-tdep.c,
alpha-linux-nat.c, sparc-linux-tdep.c, and sparc-linux-nat.c.
Joel Brobecker
Maciej W. Rozycki
Gary Benson
Omair Javaid
Tom Tromey
Luis Machado
Joel Brobecker
Ulrich Weigand
Jan Kratochvil
Thomas Schwinge
Pedro Alves
Yao Qi
Michael Snyder
Richard Earnshaw
Kazu Hirata
Daniel Jacobowitz
Eli Zaretskii