* spu.h (R_SPU_PPU32, R_SPU_PPU64): Define.
bfd/
* reloc.c (BFD_RELOC_SPU_PPU32, BFD_RELOC_SPU_PPU64): Define.
* elf-bfd.h (struct elf_backend_data): Change return type of
elf_backend_relocate_section to int.
* elf32-spu.c (elf_howto_table): Add howtos for R_SPU_PPU32 and
R_SPU_PPU64.
(spu_elf_bfd_to_reloc_type): Convert new relocs.
(spu_elf_count_relocs): New function.
(elf_backend_count_relocs): Define.
(spu_elf_relocate_section): Arrange to emit R_SPU_PPU32 and
R_SPU_PPU64 relocs.
* elflink.c (elf_link_input_bfd): Emit relocs if relocate_section
returns 2.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call
spu_cons for word.
(md_assemble): Tidy use of insn.flag.
(get_imm): Likewise. Handle uppercase input too.
(spu_cons): New function.
* config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
(TC_FORCE_RELOCATION): Don't resolve them either.
binutils/
* embedspu.sh (find_prog): Prefer prog in same dir as embedspu
over one found on the users path.
(main): Generate .reloc for each R_SPU_PPU* reloc.
Retype 'keep' to bfd_boolean.
* binutils-all/objcopy.exp: Add test for stripping a symbol used in a relocation.
* binutils-all/needed-by-reloc.s: New file.
PR binutils/4348
* objcopy.c (copy_object): Don't stop when there are no
sections to be copied.
testsuite/
2007-04-12 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/4348
* binutils-all/empty.s: New file.
* binutils-all/strip-3.d: Likewise.
* binutils-all/objcopy.exp: Run strip-3 for ELF target.
* bfd.c (bfd_fprintf_vma): Do not print addresses of 32-bit
targets as 64-bit values, even if running on a 64-bit host.
* coffgen.c (coff_print_symbol): Likewise.
* nm.c (value_format): Replace with value_format_32bit and
value_format_64bit.
(set_radix): Update setting of value_format.
(set_print_width): New function. Compute the address size of a
given bfd and set the print_width global appropriately.
(display_archive): Use set_print_width.
(display_file): Likewise,
(print_object_filename_sysv): Update use of print_width.
(print_archive_member_sysv): Likewise.
(print_symbol_filename_posix): Likewise.
(print_sumbol_info_bfd, print_symbol_info_sysv): Likewise.
200x-xx-xx Richard Sandiford <richard@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* doc/bfd.texinfo: Put the contents after the title page rather
than at the end of the document.
binutils/
200x-xx-xx Richard Sandiford <richard@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* doc/binutils.texi: Put the contents after the title page rather
than at the end of the document.
gas/
200x-xx-xx Richard Sandiford <richard@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* doc/as.texinfo: Put the contents after the title page rather
than at the end of the document.
gprof/
200x-xx-xx Richard Sandiford <richard@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* gprof.texi: Put the contents after the title page rather
than at the end of the document.
ld/
200x-xx-xx Richard Sandiford <richard@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* ld.texinfo: Put the contents after the title page rather
than at the end of the document.
* Makefile.am (bfdver.h): Only set VERSION_PACKAGE in bfdver.texi
if nonempty.
* configure.in (REPORT_BUGS_TO): Do not use "URL:" prefix.
* Makefile.in, configure, doc/Makefile.in: Regenerate.
binutils:
* doc/binutils.texi: Include VERSION_PACKAGE when reporting
version.
gas:
* doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
gprof:
* Makefile.am (TEXI2POD): Include $(AM_MAKEINFOFLAGS).
(AM_MAKEINFOFLAGS, TEXI2DVI): Define with -I ../bfd/doc.
* Makefile.in: Regenerate.
* gprof.texi: Include bfdver.texi. Report both VERSION_PACKAGE
and VERSION.
ld:
* ld.texinfo: Include VERSION_PACKAGE when reporting version.
* configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
bug-reporting URL.
* doc/Makefile.am (config.texi): Define BUGURL.
* doc/binutils.texi: Use BUGURL. Remove text about large files
and uuencoding.
* Makefile.in, configure, doc/Makefile.in: Regenerate.
gas:
* configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
bug-reporting URL.
* doc/Makefile.am (gasver.texi): Define BUGURL.
* doc/as.texinfo: Use BUGURL.
* Makefile.in, configure, doc/Makefile.in: Regenerate.
ld:
* configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
bug-reporting URL.
* Makefile.am (ldver.texi): Define BUGURL.
* ld.texinfo: Use BUGURL.
* Makefile.in, configure: Regenerate.
200x-xx-xx Phil Edwards <phil@codesourcery.com>
Richard Sandiford <richard@codesourcery.com>
* NEWS: Mention addition of --extract-symbol.
* doc/binutils.texi: Document it.
* objcopy.c (extract_symbol): New variable.
(OPTION_EXTRACT_SYMBOLS): New command_line_switch.
(copy_options): Add an entry for --extract-symbol.
(copy_usage): Mention --extract-symbol.
(copy_object): Set the start address to zero for --extract-symbol.
Do not copy private BFD data in that case.
(setup_section): Set the size, LMA and VMA to zero for
--extract-symbol. Do not copy private BFD data in that case.
(copy_section): Do not copy section contents if --extract-symbol
is passed.
(copy_main): Set extract_symbol to TRUE if --extract-symbol
is passed.
ld/testsuite/
* ld-elf/extract-symbol-1sym.d, ld-elf/extract-symbol-1sec.d,
* ld-elf/extract-symbol-1.s, ld-elf/extract-symbol-1.ld: New tests.
* ld-elf/binutils.exp: Run them.
* readelf.c: Include elf/h8.h twice. The first time in order to get the reloc
numbers, the second time in order to get the reloc decoder function.
(dump_section): Tell the user if the section being displayed has unprocessed
relocs associated with it.
(get_reloc_size): New function - returns the size of a reloc.
(debug_apply_rela_addends): Use get_reloc_size().
* dwarf.c (read_and_display_attr_value): Extend number of languages known for
the DW_AT_language attribute.
(process_debug_info): Display the attribute offset before decoding the
attribute, in case there are problems.
2076-02-02 H.J. Lu <hongjiu.lu@intel.com>
* doc/binutils.texi (objdump): Document the new addr64 option
for i386 disassembler.
include/
2076-02-02 H.J. Lu <hongjiu.lu@intel.com>
* dis-asm.h (print_i386_disassembler_options): New.
opcodes/
2076-02-02 H.J. Lu <hongjiu.lu@intel.com>
* disassemble.c (disassembler_usage): Call
print_i386_disassembler_options for i386 disassembler.
* i386-dis.c (print_i386_disassembler_options): New.
(print_insn): Support the new addr64 option.
PR binutils/3945
* configure.in (DLLTOOL_DEFAULT): New. Defined for the first PE
target.
(DLLTOOL_DEFS): Add $DLLTOOL_DEFAULT.
* configure: Regenerated.
* dlltool.c (mname): Defined with DLLTOOL_DEFAULT_XXX.
* bucomm.c (template_in_dir): New function, split out from..
(make_tempname): ..here. Open the file with O_EXCL if !HAVE_MKSTEMP.
(make_tempdir): Use template_in_dir. Handle directory creation
when !HAVE_MKDTEMP.
* objcopy.c (MKDIR): Don't define.
(copy_archive): Use make_tempdir when !HAVE_MKDTEMP too. Fix
error message.
* archures.c (bfd_mach_cpu32_fido): Rename to bfd_mach_fido.
* bfd-in2.h: Regenerate.
* cpu-m68k.c (arch_info_struct): Use bfd_mach_fido instead of
bfd_mach_cpu32_fido.
(m68k_arch_features): Use fido_a instead of cpu32.
(bfd_m68k_compatible): Reject the combination of Fido and
ColdFire. Accept the combination of CPU32 and Fido with a
warning.
* elf32-m68k.c (elf32_m68k_object_p,
elf32_m68k_merge_private_bfd_data,
elf32_m68k_print_private_bfd_data): Treat Fido as an
architecture by itself.
binutils/
* readelf.c (get_machine_flags): Treat Fido as an architecture
by itself.
gas/
* config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
architecture by itself.
(m68k_ip): Don't issue a warning for tbl instructions on fido.
(m68k_elf_final_processing): Treat Fido as an architecture by
itself.
include/elf/
* m68k.h (EF_M68K_FIDO): New.
(EF_M68K_ARCH_MASK): OR EF_M68K_FIDO.
(EF_M68K_CPU32_FIDO_A, EF_M68K_CPU32_MASK): Remove.
include/opcode/
* m68k.h (m68010up): OR fido_a.
opcodes/
* m68k-opc.c (m68k_opcodes): Replace cpu32 with
cpu32 | fido_a except on tbl instructions.
PR binutils/3384
* configure.in (AC_CHECK_HEADERS): Add limits.h and sys/param.h.
* configure: Regenerated.
* config.in: Likewise.
* readelf.c: Include <limits.h> and <sys/param.h> for PATH_MAX.
(program_interpreter): Allocate PATH_MAX bytes instead of 64.
(process_program_headers): Don't assume that program interpreter
is shorter than 64 characters.
PR binutils/3384
* configure.in (AC_CHECK_HEADERS): Add limits.h and sys/param.h.
* configure: Regenerated.
* config.in: Likewise.
* readelf.c: Include <limits.h> and <sys/param.h> for PATH_MAX.
(program_interpreter): Allocate PATH_MAX bytes instead of 64.
(process_program_headers): Don't assume that program interpreter
is shorter than 64 characters.
* configure.in: Check for the mkstemp and mkdtemp functions.
* configure: Regenerate.
* config.in (HAVE_MKDTEMP): New potential define.
(MAKE_MKSTEMP): Likewise.
* bucomm.c (make_tempname): Use mkstemp if it is available.
* make_tempdir): New function: Create a temporary directory using mkdtemp, if
it is available.
* bucomm.h (make_tempdir): New prototype.
* objcopy.c (copy_archive): Use make_tempdir if it is available.
(strip_main): Produce an warning message if a temporary file could not be
(copy_main): Likewise.
* ar.c (write_archive): Likewise.
argument and emits the string followed by a comma and then the length of
the string.
(CONST_STRNEQ): New macro. Checks to see if a variable string has a constant
string as its initial characters.
(CONST_STRNCPY): New macro. Copies a constant string to the start of a
variable string.
* bfd-in2.h: Regenerate.
* <remainign files>: Make use of the new macros.
* elf.c (_bfd_elf_copy_private_header_data): Fix group members
that have had their SHT_GROUP section removed.
* objcopy.c (group_signature): New function, split out from..
(setup_section): ..here.
(is_strip_section): Return true for SHT_GROUP sections that are
going to lose their group signature symbol.
* objcopy.c (copy_archive): Add new parameter: force_output_target. If not
true, then perserve the file formats of each copied archive element,
otherwise force them to be one specific file format.
(copy_file): Compute force_output_target parameter to pass to copy_archive.
* objcopy.c (is_strip_section): Do not treat group sections as debugging sections.
* doc/binutils.texi (--only-keep-debug): Document that this switch is only intended for use on fully linked files.
* Makefile.am: Add rules to build pe-arm-wince.lo and pei-arm-wince.lo objects.
* Makefile.in: Regenerate.
* pe-arm-wince.c: New file.
* pei-arm-wince.c: New file.
* pei-arm.c: Remove ARM_WINCE block.
* pe-arm.c: Remove ARM_WINCE block. Rename
bfd_arm_pe_allocate_interworking_sections,
bfd_arm_pe_get_bfd_for_interworking, and
bfd_arm_pe_process_before_allocation to
bfd_armpe_allocate_interworking_sections,
bfd_armpe_get_bfd_for_interworking, and
bfd_armpe_process_before_allocation. Move them before including bfd.h.
* bfd.c: ARM wince bfd format names were renamed. Adjust.
* coff-arm.c [ARM_WINCE]: Adjust so Windows CE doesn't end up with unexpected/conflicting relocs.
* targets.c: The arm-wince-pe target got its own new vector. Adjust.
* config.bfd: Likewise.
* configure.in: Likewise.
* configure: Regenerate.
binutils
* configure.in: Split arm-pe and arm-wince-pe. Build dlltool with -DDLLTOOL_ARM_WINCE for Windows CE case.
* configure: Regenerate.
* dlltool.c: Add support for arm-wince.
gas
* Makefile.am (TARG_ENV_HFILES): Add te-wince-pe.h.
* Makefile.in: Regenerate.
* config/tc-arm.h [TARGET_FORMAT]: ARM wince bfd names were renamed. Adjust.
ld
* Makefile.am: Split arm-wince into its own emulation.
* Makefile.in: Regenerate.
* configure.tgt: Set targ_emul to arm_wince_pe for ARM Windows CE targets.
* pe-dll.c : Define PE_ARCH_arm_wince.
(pe_detail_list): Add PE_ARCH_arm_wince case.
(make_one): Handle PE_ARCH_arm_epoc and PE_ARCH_arm_wince cases.
* emulparams/arm_wince_pe.sh: New file.
* emultempl/pe.em: Handle new TARGET_IS_arm_wince_pe define.
Remap bfd_arm_allocate_interworking_sections, bfd_arm_get_bfd_for_interworking and
bfd_arm_process_before_allocation for arm-pe and arm-wince-pe targets too.
(gld_${EMULATION_NAME}_recognized_file): Handle arm-wince and arm-epoc bfd format names.
* addr2line.c (process_file): Change function from void to returning an int. Return 0 upon success, 1 otherwise.
(main): Use return value from process_file as the exit value.
* ar.c (ranlib_only): Change function from void to returning an int. Return 0 upon success, 1 otherwise.
(ranlib_touch): Likewise.
(main): Use return value from ranlib functions as exit value.
* objcopy.c (add_specific_symbol): Set status to 1 if get_file_size fails.
(copy_file): Likewise.
(strip_main): Likewise.
(copy_main): Likewise.
* objdump.c (display_file): Set exit_status to 1 if get_file_size fails.
* size.c (display_file): Set return_code to 1 if get_file_size fails.
end of block address that is beyond the end of the section.
When encountering a corrupt CIE pointer do not reset the start pointer as
more data still has to be read.
Do not warn about user defined call frame instructions.
