* gdb.base/setshow.c: New file, tests show and set.
* gdb.base/help.exp: Add test for help set|show annotate.
* gdb.base/default.exp: Add test for set|show annotate.
PR 8511
errors unique.
* testsuite/gdb.base/nodebug.exp: Whack out all -g options
explicitly.
* v850-tdep.c (v850_init_extra_frame_info v850_frame_chain): Fix
sign bugs with scanning prologues. Get a little smarter about
calculating the length of uninteresting instructions.
and width commands. This is done elsewhere.
* (gdb_start): Don't call gdb_start_sim here. That's already
done in gdb_load. This fixes lots of failures in default.exp.
(distclean maintainer-clean realclean): No need to remove files
twice. Nuke the duplicates.
* gdb.base/Makefile.in (EXECUTABLES): Add "structs".
* gdb.threads/Makefile.in (distclean maintainer-clean realclean):
Remove config.h along with other config files.
"p func1 ()" and note that rests of tests are skipped.
* gdb.base/corefile.exp: Add i*86-*-linux* and m68*-*-hpux*
setup_xfails for "print func2::coremaker_local".
Add i*86-*-linux* setup_xfail for "backtrace in corefile.exp".
* gdb.base/mips_pro.exp: Restart gdb in this test so it isn't
affected by the previous run test.
* gdb.chill/misc.exp: Add m68*-*-hpux* setup_xfails for
"print array () ubyte (foo)" and "print/x array () byte (\$i)"
* gdb.chill/pr-8742.exp: Add m68*-*-hpux* setup_xfails for
"pass int powerset tuple" and "pass modeless int powerset tuple".
* gdb.chill/tests2.exp: Add m68*-*-hpux* setup xfails for
"real write 4" and "real write 8".
* gdb.shill/tuples.exp: Add i*86-*-linux* and m68*-*-hpux*
setup_xfails for "print vs1 after tuple assign 2",
"print \$i after tuple assign 2", and
"print vs2 after tuple assign 2".
* lib/gdb.exp (gdb_test): When a gdb aborts, print a more
meaningful error message and return -1 so the caller can
suppress further tests and avoid a cascade of errors.
format for printing version.
* gdb.base/default.exp: Ditto.
* gdb.base/interrupt.exp: Fix problem with cascade of
errors if child process dies while calling a function.
(just-check): Add shared library paths for libstdc++, tk,
tcl, bfd, and opcodes to the environment variable specified
in RPATH_ENVVAR.
* configure.in: Add support to recognize --enable-shared flag
and generate correct value for RPATH_ENVVAR.
* configure: Regenerated with autoconf.
PTHREAD_CREATE_NULL_ARG2): Accomodate old pthreads implementations.
* gdb.threads/pthreads.exp: Try linking with both -lpthread (Solaris)
and -lpthreads (everybody else).
(test_startup): Fail gracefully if threads are not supported.
* gdb.base/nodebug.exp: Add setup_xfail hppa*-*-hpux* for
"p/c array_index("abcdef",2)" when not gcc compiled.
* gdb.base/corefile.exp: Add setup_xfail hppa*-*-hpux* for
"print func2::coremaker_local" when not gcc compiled.
* gdb.base/opaque.exp: Remove setup_xfail hppa*-*-hpux* for
"ptype on opaque struct tagname (statically)",
"ptype on opaque struct tagname (dynamically) 1", and
"ptype on opaque struct tagname (dynamically) 2"
for not compiled with gcc.
* gdb.base/mips_pro.exp: Only do setup_xfail hppa*-*-* for
backtrace when compiled with gcc.
* lib/gdb.exp (runto_main): Return result of "runto main" rather
than always return success.
encapsulate all the steps/nexts done during self test, starting
at main, and makes them less sensitive to optimization issues.
Add "hppa*-*-hpux*" to setup_xfail for "backtrace through
signal handler" test.
* gdb.threads/pthreads.exp: Only run this for native configs.
* gdb.base/signals.exp (test_handle_all_print): Remove code that
increased timeouts, it now makes no difference.
* gdb.base/structs.exp (do_function_calls): Add hppa*-*-hpux9*"
setup_xfails for "p fun5()", "p fun6()", "p fun7()", and "p fun8"
tests.
gdb.c++/virtfunc.exp (do_tests): Add "mips-*-irix5*" setup_xfail
for "runto test_calls(void)" test.
structures.
* gdb.base/structs.c: C source for test.
Sanitized away until we've got a valid copyright assignment from
Michael Snyder.
Only tested on the PA. I assume other ports will needs some xfails
and other possible testsuite tweakage.
"buffer_full".
* config/nind-gdb.exp (gdb_start): Use "full_buffer", not
"buffer_full".
* config/mips-gdb.exp (gdb_start): Use "full_buffer", not
"buffer_full".
* lib/gdb.exp (gdb_test): Correct pattern is "full_buffer", not
"buffer_full".
each signal's status in the output of "handle all print".
* lib/gdb.exp (gdb_test): Document that the pattern must NOT include
the \r\n sequence that immediately precedes the gdb prompt.
* gdb.base/a1-selftest.exp: Save original timeout and restore
after test.
gdb initialization, also report how long dejagnu waited. Restore
old timeout before doing error return. Temporarily increase timeout
by 3 minutes to allow for slow startups over heavy NFS use.
attempting to regenerate it. Eliminate use of a temporary file
and just generate the info file directly. Source it immediately,
for consistency of use.
* gdb.base/corefile.exp: Ditto
* gdb.base/exprs.exp: Ditto.
* gdb.base/funcargs.exp: Ditto.
* gdb.base/langs.exp: Ditto.
* gdb.base/list.exp: Ditto.
* gdb.base/mips_pro.exp: Ditto.
* gdb.base/nodebug.exp: Ditto.
* gdb.base/opaque.exp: Ditto.
* gdb.base/ptype.exp: Ditto.
* gdb.base/scope.exp: Ditto.
* gdb.base/setvar.exp: Ditto.
* gdb.base/signals.exp: Ditto.
* gdb.base/whatis.exp: Ditto.
* gdb.c++/templates.exp: Ditto.
* gdb.c++/virtfunc.exp: Ditto.
* gdb.c++/virtfunc.exp: Use contents of gcc_compiled to decide
whether or not to add -lstdc++ to the compile command line args.
break.c.
* gdb.base/callfuncs.exp: Don't run these tests on the h8300.
* gdb.base/default.exp: Add h8300 xfails. Handle messages
from remote-sim.
* gdb.base/exprs.exp: Add h8300 xfails.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/printcmds.exp: Likewise.
* gdb.base/ptype.exp: Likewise.
* gdb.base/setvar.exp: Handle sizeof (int) != 4 for h8300. Add
h8300 xfails.
* gdb.base/return.exp: Handle float/double precision problems
on the h8300.
* gdb.base/funcargs.c: Explicitly make last constant argument to
call_after_alloca_subr an unsigned long type.
* gdb.base/return.c: Include stdio.h.
Testsuite work for the H8/300 -gstabs. HMSE.
we always regenerate the coremaker program. Detect special case
where registers cannot be read from core file. Change setup_xfail
for "print func2:coremaker_local" and "backtrace in corefile.exp"
to fail for all i*86 targets.
* gdb.base/funcargs.c: Patch for SPARCworks alloca compatibility
* gdb.c++/templates.exp: Only match on basename of file since
some formats like xcoff don't encode directory information.
* gdb.stabs/weird.exp: Use the right sed script for powerpc
and rs6000 AIX xcoff targets.
* configure.in: Add stabsdirs to configdirs for powerpc-*-aix*.
* configure: Regenerate.
* gdb.base/Makefile.in (clean): Remove generated file twice-tmp.c
here, rather than in distclean.
defined, and use it to compile the test case with -O2. The
native compilation still uses no optimization.
* gdb.base/mips_pro.c: Remove inline assembly code since
it is compiled PIC by default, which results in assembler
warnings that make the testsuite think the compilation
was unsuccessful.
