The moribund locations heuristics are problematic. This patch teaches
GDB about targets that can reliably tell whether a trap was caused by
a software or hardware breakpoint, and thus don't need moribund
locations, thus bypassing all the problems that mechanism has.
The non-stop-fair-events.exp test is frequently failing currently.
E.g., see https://sourceware.org/ml/gdb-testers/2015-q1/msg03148.html.
The root cause is a fundamental problem with moribund locations. For
example, the stepped_breakpoint logic added by af48d08f breaks in this
case (which is what happens with that test):
- Step thread A, no breakpoint is set at PC.
- The kernel doesn't schedule thread A yet.
- Insert breakpoint at A's PC, for some reason (e.g., a step-resume
breakpoint for thread B).
- Kernel finally schedules thread A.
- thread A's stepped_breakpoint flag is not set, even though it now
stepped a breakpoint instruction.
- adjust_pc_after_break gets the PC wrong, because PC == PREV_PC, but
stepped_breakpoint is not set.
We needed the stepped_breakpoint logic to workaround moribund
locations, because otherwise adjust_pc_after_break could apply an
adjustment when it shouldn't just because there _used_ to be a
breakpoint at PC (a moribund breakpoint location). For example, on
x86, that's wrong if the thread really hasn't executed an int3, but
instead executed some other 1-byte long instruction. Getting the PC
adjustment wrong of course leads to the inferior executing the wrong
instruction.
Other problems with moribund locations are:
- if a true SIGTRAP happens to be raised when the program is
executing the PC that used to have a breakpoint, GDB will assume
that is a trap for a breakpoint that has recently been removed, and
thus we miss reporting the random signal to the user.
- to minimize that, we get rid of moribund location after a while.
That while is defined as just a certain number of events being
processed. That number of events sometimes passes by before a
delayed breakpoint is processed, and GDB confuses the trap for a
random signal, thus reporting the random trap. Once the user
resumes the thread, the program crashes because the PC was not
adjusted...
The fix for all this is to bite the bullet and get rid of heuristics
and instead rely on the target knowing accurately what caused the
SIGTRAP. The target/kernel/stub is in the best position to know what
that, because it can e.g. consult priviledged CPU flags GDB has no
access to, or by knowing which exception vector entry was called when
the instruction trapped, etc. Most debug APIs I've seen to date
report breakpoint hits as a distinct event in some fashion. For
example, on the Linux kernel, whether a breakpoint was executed is
exposed to userspace in the si_code field of the SIGTRAP's siginfo.
On Windows, the debug API reports a EXCEPTION_BREAKPOINT exception
code.
We needed to keep around deleted breakpoints in an on-the-side list
(the moribund locations) for two main reasons:
- Know that a SIGTRAP actually is a delayed event for a hit of a
breakpoint that was removed before the event was processed, and
thus should not be reported as a random signal.
- So we still do the decr_pc_after_break adjustment in that case, so
that the thread is resumed at the correct address.
In the new model, if GDB processes an event the target tells is a
breakpoint trap, and GDB doesn't find the corresponding breakpoint in
its breakpoint tables, it means that event is a delayed event for a
breakpoint that has since been removed, and thus the event should be
ignored.
For the decr_pc_after_after issue, it ends up being much simpler that
on targets that can reliably tell whether a breakpoint trapped, for
the breakpoint trap to present the PC already adjusted. Proper
multi-threading support already implies that targets needs to be doing
decr_pc_after_break adjustment themselves, otherwise for example, in
all-stop if two threads hit a breakpoint simultaneously, and the user
does "info threads", he'll see the non-event thread that hit the
breakpoint stopped at the wrong PC.
This way (target adjusts) also ends up eliminating the need for some
awkward re-incrementing of the PC in the record-full and Linux targets
that we do today, and the need for the target_decr_pc_after_break
hook.
If the target always adjusts, then there's a case where GDB needs to
re-increment the PC. Say, on x86, an "int3" instruction that was
explicitly written in the program traps. In this case, GDB should
report a random SIGTRAP signal to the user, with the PC pointing at
the instruction past the int3, just like if GDB was not debugging the
program. The user may well decide to pass the SIGTRAP to the program
because the program being debugged has a SIGTRAP handler that handles
its own breakpoints, and expects the PC to be unadjusted.
Tested on x86-64 Fedora 20.
gdb/ChangeLog:
2015-03-04 Pedro Alves <palves@redhat.com>
* breakpoint.c (need_moribund_for_location_type): New function.
(bpstat_stop_status): Don't skipping checking moribund locations
of breakpoint types which the target tell caused a stop.
(program_breakpoint_here_p): New function, factored out from ...
(bp_loc_is_permanent): ... this.
(update_global_location_list): Don't create a moribund location if
the target supports reporting stops of the type of the removed
breakpoint.
* breakpoint.h (program_breakpoint_here_p): New declaration.
* infrun.c (adjust_pc_after_break): Return early if the target has
already adjusted the PC. Add comments.
(handle_signal_stop): If nothing explains a signal, and the target
tells us the stop was caused by a software breakpoint, check if
there's a breakpoint instruction in the memory. If so, adjust the
PC before presenting the stop to the user. Otherwise, ignore the
trap. If nothing explains a signal, and the target tells us the
stop was caused by a hardware breakpoint, ignore the trap.
* target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
to_supports_stopped_by_hw_breakpoint>: New fields.
(target_stopped_by_sw_breakpoint)
(target_supports_stopped_by_sw_breakpoint)
(target_stopped_by_hw_breakpoint)
(target_supports_stopped_by_hw_breakpoint): Define.
* target-delegates.c: Regenerate.
Gary stumbled on this:
(gdb) PASS: gdb.threads/thread-specific-bp.exp: all-stop: continue to end
info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fdb700 (LWP 13717) "thread-specific" end () at /home/gary/work/archer/startswith/src/gdb/testsuite/gdb.threads/thread-specific-bp.c:29
(gdb) FAIL: gdb.threads/thread-specific-bp.exp: all-stop: thread start is gone
info breakpoint
The problem is that "...archer/startswith/src..." has a "start" in it,
which matches the too-lax regex in the test.
Rather than tweaking the regex, we can just remove the whole "info
threads", like we removed similar ones in other files -- GDB nowadays
does this implicitly already, so things should work without it. Thus
removing this even improves testing here a bit.
gdb/testsuite/ChangeLog:
2015-03-04 Pedro Alves <palves@redhat.com>
* gdb.threads/thread-specific-bp.exp: Delete "info threads" test.
This Linuxism has made its way into infrun.c, in the follow-fork code:
inferior_ptid = ptid_build (child_pid, child_pid, 0);
The OS-specific code should fill in the LWPID, TID parts with the
appropriate values, if any, and the core code should not be peeking at
the components of the ptids.
gdb/
2015-03-04 Pedro Alves <palves@redhat.com>
* infrun.c (follow_fork_inferior): Use the whole of the
inferior_ptid and pending_follow.related_pid ptids instead of
building ptids from the process components. Adjust verbose output
to use target_pid_to_str.
* linux-nat.c (linux_child_follow_fork): Use the whole of the
inferior_ptid and pending_follow.related_pid ptids instead of
building ptids from the process components.
These systems (OpenBSD and HP-UX 10.x) already support follow-fork
including the events needed to for "catch fork". This just makes
the upper layers realize this.
gdb/
2015-03-04 Mark Kettenis <kettenis@gnu.org>
* inf-ptrace.c [PT_GET_PROCESS_STATE]
(inf_ptrace_insert_fork_catchpoint): New function.
(inf_ptrace_remove_fork_catchpoint): New function.
(inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
Ensure we hard stop via abort() for unhandled stub types rather than
continuing either silently (or noisly with a BFD_FAIL()).
Call abort() giving a hard stop rather than BFD_FAIL () for unhandled
stub types.
When adding vector register support to GDB, s390_register_name() was
added to suppress the right halves of the first 16 vector registers.
However, that function returned NULL instead of an empty string in such
a case. This leads to an incomplete list of registers returned by
"complete info registers ", because completion stops at the first NULL
return value from user_reg_map_regnum_to_name().
gdb/ChangeLog:
* s390-linux-tdep.c (s390_register_name): Return empty string
instead of NULL for registers that shouldn't be visible.
On some targets each of the assignments "i = 0" in the C source for
"breakpoint-in-ro-region.exp" are compiled to a single instruction.
Then each "si" stops at the beginning of the next source line. But on
some other targets (like s390) such an assignment compiles to multiple
instructions. Then "si" may stop in mid-line, and GDB displays the PC
address in addition to the source line number. This was not considered
by the regexp for this case.
gdb/testsuite/ChangeLog:
* gdb.base/breakpoint-in-ro-region.exp (test_single_step): In the
regexps for GDB's current line display, accept a hex address
preceding the line number.
For the "multiple targets" test in catch-syscall.exp, set the 'arch1'
variable to a valid string.
gdb/testsuite/ChangeLog:
* gdb.base/catch-syscall.exp (test_catch_syscall_multi_arch): Set
the 'arch1' variable for "s390*-linux*" targets.
This patch fixes a typo that caused the wrong syscall XML file to be
used for s390x targets.
gdb/ChangeLog:
* s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
XML file for 64-bit targets.
On 64-bit platforms GDB did not include "s390:31-bit" in its list of
architecture names. This patch fixes that.
To determine the list of architecture names for S390,
gdbarch_printable_names() walks through the linked list of BFD arches
starting with the default S390 arch, which is "s390:64-bit" on 64-bit
platforms. But since "s390:64-bit" was at the end of that list, the
31-bit architecture was not reached. The patch swaps the elements of
that list on 64-bit platforms.
bfd/ChangeLog:
* cpu-s390.c (N): New macro.
(bfd_s390_31_arch): New. Define only if default target word size
is 64 bits. Otherwise define...
(bfd_390_64_arch): ...this. Make static.
(bfd_s390_arch): Define according to the default target word size.
Let the 'next' field point to the alternate arch.
This fixes:
> gdb compile failed, /gdb/testsuite/gdb.threads/clone-thread_db.c: In function 'main':
> /gdb/testsuite/gdb.threads/clone-thread_db.c:67:3: warning: implicit declaration of function 'alarm' [-Wimplicit-function-declaration]
> alarm (300);
> ^
> /gdb/testsuite/gdb.threads/clone-thread_db.c:69:3: warning: implicit declaration of function 'pthread_create' [-Wimplicit-function-declaration]
> pthread_create (&child, NULL, thread_fn, NULL);
> ^
> /gdb/testsuite/gdb.threads/clone-thread_db.c:70:3: warning: implicit declaration of function 'pthread_join' [-Wimplicit-function-declaration]
> pthread_join (child);
> ^
And then adding the missing headers revealed the pthread_join call was
incorrect. This probably fixes the crash we see on ppc64be, e.g., at
https://sourceware.org/ml/gdb-testers/2015-q1/msg04415.html
the logs there show:
...
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x3fffb7ff54a0 (LWP 9275)]
0x00003fffb7f3ce74 in .pthread_join () from /lib64/libpthread.so.0
(gdb) FAIL: gdb.threads/clone-thread_db.exp: continue to end
...
Tested on x86_64 Fedora 20.
gdb/testsuite/
2015-03-04 Pedro Alves <palves@redhat.com>
* gdb.threads/clone-thread_db.c: Include unistd.h and pthread.h.
(main): Pass missing retval argument to pthread_join call.
bfd/
PR gas/17843
* elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Expect
R_AARCH64_TLSLE_MOVW_TPREL_G0_NC and R_AARCH64_TLSLE_MOVW_TPREL_G1_NC
to be used with MOVK rather than MOVZ.
gas/
PR gas/17843
* config/tc-aarch64.c (process_movw_reloc_info): Allow
R_AARCH64_TLSLE_MOVW_TPREL_G0_NC and R_AARCH64_TLSLE_MOVW_TPREL_G1_NC
for MOVK.
gas/testsuite/
PR gas/17843
* gas/aarch64/tls.s, gas/aarch64/tls.d: Add test for
R_AARCH64_TLSLE_MOVW_TPREL_G0/R_AARCH64_TLSLE_MOVW_TPREL_G1_NC
sequence.
ld/testsuite/
PR gas/17843
* ld-aarch64/tlsle.s, ld-aarch64/tlsle.d: New test.
* ld-aarch64/aarch64-elf.exp: Run it.
find_default_create_inferior and find_default_attach were removed in b3ccfe11.
gdb/ChangeLog:
* target.h (find_default_create_inferior): Remove declaration.
(find_default_attach): Likewise.
In this case, we want to resume the entire process and not an
individual thread.
gdb/
2015-03-03 Pedro Alves <palves@redhat.com>
* inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
Use ptid_get_pid to get the overall process id when resuming all
threads.
2015-03-03 Jiong Wang <jiong.wang@arm.com>
opcode/
* arm-dis.c (arm_symbol_is_valid): Skip ARM private symbols.
binutils/testsuite/
* binutils-all/arm/rvct_symbol.s: New testcase.
* binutils-all/arm/objdump.exp: Run it.
Ref: https://sourceware.org/ml/gdb-patches/2015-03/msg00060.html
The record-btrace target can hit an assertion here:
Breakpoint 1, record_btrace_fetch_registers (ops=0x974bfc0 <record_btrace_ops>,
regcache=0x9a0a798, regno=8) at gdb/record-btrace.c:1202
1202 gdb_assert (tp != NULL);
(gdb) p regcache->ptid
$3 = {pid = 23856, lwp = 0, tid = 0}
The problem is that the linux-nat layer converts the ptid to a
single-process ptid before passing the request down to the inf-ptrace
layer, which loses information, and then record-btrace can't find the
corresponding thread in GDB's thread list:
(gdb) bt
#0 record_btrace_fetch_registers (ops=0x974bfc0 <record_btrace_ops>, regcache=0x9a0a798, regno=8)
at gdb/record-btrace.c:1202
#1 0x083f4ee2 in delegate_fetch_registers (self=0x974bfc0 <record_btrace_ops>, arg1=0x9a0a798,
arg2=8) at gdb/target-delegates.c:149
#2 0x08406562 in target_fetch_registers (regcache=0x9a0a798, regno=8)
at gdb/target.c:3279
#3 0x08355255 in regcache_raw_read (regcache=0x9a0a798, regnum=8,
buf=0xbfffe6c0 "¨\003\222\tÀ8kIøæÿ¿HO5\b\035]")
at gdb/regcache.c:643
#4 0x083558a7 in regcache_cooked_read (regcache=0x9a0a798, regnum=8,
buf=0xbfffe6c0 "¨\003\222\tÀ8kIøæÿ¿HO5\b\035]")
at gdb/regcache.c:734
#5 0x08355de3 in regcache_cooked_read_unsigned (regcache=0x9a0a798, regnum=8, val=0xbfffe738)
at gdb/regcache.c:838
#6 0x0827a106 in i386_linux_resume (ops=0x9737ca0 <linux_ops_saved>, ptid=..., step=1,
signal=GDB_SIGNAL_0) at gdb/i386-linux-nat.c:670
#7 0x08280c12 in linux_resume_one_lwp (lp=0x9a0a5b8, step=1, signo=GDB_SIGNAL_0)
at gdb/linux-nat.c:1529
#8 0x08281281 in linux_nat_resume (ops=0x98da608, ptid=..., step=1, signo=GDB_SIGNAL_0)
at gdb/linux-nat.c:1708
#9 0x0850738e in record_btrace_resume (ops=0x98da608, ptid=..., step=1, signal=GDB_SIGNAL_0)
at gdb/record-btrace.c:1760
...
The fix is just to not lose information, and let the intact ptid reach
record-btrace.c.
Tested on x86-64 Fedora 20, -m32.
gdb/ChangeLog:
2015-03-03 Pedro Alves <palves@redhat.com>
* i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
the lwp field of ptid. Pass the full ptid to get_thread_regcache.
* inf-ptrace.c (get_ptrace_pid): New function.
(inf_ptrace_resume): Use it.
* linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
to the lower layer.
The heuristic for filtering out kernel addressess in BTS trace checks the
most significant bit in each address. This works fine for 32-bit and 64-bit
mode.
For 32-bit compatibility mode, i.e. a 32-bit inferior running on 64-bit
host, we need to check bit 63 (or any bit bigger than 31), not bit 31.
Use the machine field in struct utsname provided by a uname call to
determine whether we are running on a 64-bit host.
Thanks to Jan Kratochvil for reporting the issue.
gdb/
* nat/linux-btrace.c: Include sys/utsname.h.
(linux_determine_kernel_ptr_bits): New.
(linux_enable_bts): Call linux_determine_kernel_ptr_bits.
* x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
ptr_bits.
gdbserver/
* linux-low.c (linux_low_enable_btrace): Do not overwrite non-zero
ptr_bits.
On some systems, _dl_runtime_resolve returns to the resolved function
instead of jumping to it. Since btrace will not find the function in
the current stack back trace, it will start a new back trace on the
same level. It will look the same to the user via the backtrace
command but the frames will have different id's which confuses stepping.
This fixes a test fail with 32-bit inferior reported by Jan Kratochvil.
gdb/
* btrace.c (ftrace_update_function): Treat return as tailcall for
"_dl_runtime_resolve".
The "record function-call-history" command prints the range of source lines
for a function segment when given the /l modifier. This information is
computed for the entire execution history when processing the recorded branch
trace.
To speed up the initial trace processing, we compute the information when
we print a function segment and only if requested. The computation is fast
enough (due to the limited scope) that it is not worth storing the data in
struct btrace_function, anymore.
gdb/
* btrace.h (btrace_function) <lbegin, lend>: Remove.
* btrace.c (ftrace_debug): Do not print the line range.
(ftrace_skip_file, ftrace_update_lines): Remove.
(ftrace_new_function): Remove lbegin and lend initialization.
(btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
* record-btrace.c (btrace_compute_src_line_range): New.
(btrace_call_history_src_line): Call btrace_compute_src_line_range.
This fixes invalid reads Valgrind first caught when debugging against
a GDBserver patched with a series that adds exec events to the remote
protocol. Like these, using the gdb.threads/thread-execl.exp test:
$ valgrind ./gdb -data-directory=data-directory ./testsuite/gdb.threads/thread-execl -ex "tar extended-remote :9999" -ex "b thread_execler" -ex "c" -ex "set scheduler-locking on"
...
Breakpoint 1, thread_execler (arg=0x0) at src/gdb/testsuite/gdb.threads/thread-execl.c:29
29 if (execl (image, image, NULL) == -1)
(gdb) n
Thread 32509.32509 is executing new program: build/gdb/testsuite/gdb.threads/thread-execl
[New Thread 32509.32532]
==32510== Invalid read of size 4
==32510== at 0x5AA7D8: delete_breakpoint (breakpoint.c:13989)
==32510== by 0x6285D3: delete_thread_breakpoint (thread.c:100)
==32510== by 0x628603: delete_step_resume_breakpoint (thread.c:109)
==32510== by 0x61622B: delete_thread_infrun_breakpoints (infrun.c:2928)
==32510== by 0x6162EF: for_each_just_stopped_thread (infrun.c:2958)
==32510== by 0x616311: delete_just_stopped_threads_infrun_breakpoints (infrun.c:2969)
==32510== by 0x616C96: fetch_inferior_event (infrun.c:3267)
==32510== by 0x63A2DE: inferior_event_handler (inf-loop.c:57)
==32510== by 0x4E0E56: remote_async_serial_handler (remote.c:11877)
==32510== by 0x4AF620: run_async_handler_and_reschedule (ser-base.c:137)
==32510== by 0x4AF6F0: fd_event (ser-base.c:182)
==32510== by 0x63806D: handle_file_event (event-loop.c:762)
==32510== Address 0xcf333e0 is 16 bytes inside a block of size 200 free'd
==32510== at 0x4A07577: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==32510== by 0x77CB74: xfree (common-utils.c:98)
==32510== by 0x5AA954: delete_breakpoint (breakpoint.c:14056)
==32510== by 0x5988BD: update_breakpoints_after_exec (breakpoint.c:3765)
==32510== by 0x61360F: follow_exec (infrun.c:1091)
==32510== by 0x6186FA: handle_inferior_event (infrun.c:4061)
==32510== by 0x616C55: fetch_inferior_event (infrun.c:3261)
==32510== by 0x63A2DE: inferior_event_handler (inf-loop.c:57)
==32510== by 0x4E0E56: remote_async_serial_handler (remote.c:11877)
==32510== by 0x4AF620: run_async_handler_and_reschedule (ser-base.c:137)
==32510== by 0x4AF6F0: fd_event (ser-base.c:182)
==32510== by 0x63806D: handle_file_event (event-loop.c:762)
==32510==
[Switching to Thread 32509.32532]
Breakpoint 1, thread_execler (arg=0x0) at src/gdb/testsuite/gdb.threads/thread-execl.c:29
29 if (execl (image, image, NULL) == -1)
(gdb)
The breakpoint in question is the step-resume breakpoint of the
non-main thread, the one that was "next"ed.
The exact same issue can be seen on mainline with native debugging, by
running the thread-execl.exp test in non-stop mode, because the kernel
doesn't report a thread exit event for the execing thread.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-03-02 Pedro Alves <palves@redhat.com>
* infrun.c (follow_exec): Delete all threads of the process except
the event thread. Extended comments.
gdb/testsuite/ChangeLog:
2015-03-02 Pedro Alves <palves@redhat.com>
* gdb.threads/thread-execl.exp (do_test): Handle non-stop.
(top level): Call do_test with non-stop as well.
gdb_test_multiple is supposed to return -1 on internal error:
# Returns:
# 1 if the test failed, according to a built-in failure pattern
# 0 if only user-supplied patterns matched
# -1 if there was an internal error.
But alas, that's broken, it returns success... It looks like the code
is assuming an earlier 'set result -1' is still in effect, but
'result' is set to 0 at the end, just before we call gdb_expect:
set result 0
set code [catch {gdb_expect $code} string]
gdb/testsuite/
2015-03-02 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_test_multiple) <internal error>: Set result to
-1.
2015-02-04 Peter Collingbourne <pcc@google.com>
Cary Coutant <ccoutant@google.com>
gold/
* output.cc (Output_section::add_merge_input_section): Do not
attempt to merge sections with an entsize of 0.
As we cannot use type bool until conversion to C++ is official,
this patch re-instates the ARI checks for "true/false".
gdb/ChangeLog:
* contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
Using type bool from stdbool unfortunately causes problems trying
to build GDB on AiX and Solaris:
In file included from ../../src/gdb/utils.h:24:0,
from ../../src/gdb/defs.h:707,
from ../../src/gdb/utils.c:20:
/[...]/curses.h:96:14: error: two or more data types in declaration
specifiers
typedef char bool;
^
make[2]: *** [utils.o] Error 1
In theory, the problem is in curses.h which, in both cases, do
something similar. On Solaris:
#if !defined(__cplusplus) && !defined(_BOOL)
typedef char bool;
#endif /* !defined(__cplusplus) && !defined(_BOOL) */
On AiX:
#if !defined(__cplusplus) || (defined(__IBMCPP__) &&(__IBMCPP__<400))
#ifndef _BOOL
#define _BOOL
typedef int bool;
#endif
#endif
You can reproduce the same problem by trying to compile:
% cat toto.c
#include <stdbool.h>
#include <curses.h>
% gcc -c toto.c
In file included from toto.c:1:0:
/[...]/curses.h:159:13: error: two or more data types in declaration
specifiers
typedef int bool;
^
This specific issue wouldn't occur if we included curses.h before
including stdbool.h, and I looked at that just to be complete.
Here is a small schematic representation of the include logic:
* utils.c:
-> defs.h -> utils.h -> stdbool.h
-> gdb_curses.h -> curses.h
Because defs.h should always be first on the list, it means that
stdbool.h will always necessarily be included ahead of curses.h.
But, thinking beyond this very specific issue, it shows that using
stdbool.h is going to cause problems on these systems until either
GCC fixes those includes in a way that makes them work; or we switch
to C++.
In the meantime, I think the path of least resistance is to revert
the use of stdbool.h, and use integers, the way we've done up until
now. The benefits of using type "bool" are modest, IMO, so not
a great loss, and a temporary one.
gdb/ChangeLog:
* utils.h: Remove <stdbool.h> #include.
(producer_is_gcc): Change return type to "int".
* utils.c (producer_is_gcc): Change return type to int.
Return 1 instead of true, and 0 instead of false.
Adjust function documentation accordingly.
On S/390 targets with vector registers, enable gdbserver to advertise
and handle the feature "org.gnu.gdb.s390.vx".
gdb/gdbserver/ChangeLog:
* Makefile.in (s390-vx-linux64.c, s390-tevx-linux64.c)
(s390x-vx-linux64.c, s390x-tevx-linux64.c): New rules.
(clean): Add "rm -f" for above C files.
* configure.srv (srv_regobj): Add s390-vx-linux64.o,
s390-tevx-linux64.o, s390x-vx-linux64.o, and s390x-tevx-linux64.o.
(srv_xmlfiles): Add s390-vx-linux64.xml, s390-tevx-linux64.xml,
s390x-vx-linux64.xml, s390x-tevx-linux64.xml, and s390-vx.xml.
* linux-s390-low.c (HWCAP_S390_VX): New macro.
(init_registers_s390_vx_linux64, init_registers_s390_tevx_linux64)
(init_registers_s390x_vx_linux64)
(init_registers_s390x_tevx_linux64)
(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): New extern
declarations.
(s390_fill_vxrs_low, s390_store_vxrs_low, s390_fill_vxrs_high)
(s390_store_vxrs_high): New functions.
(s390_regsets): Add entries for NT_S390_VXRS_LOW and
NT_S390_VXRS_HIGH.
(s390_arch_setup): Add logic for selecting one of the new target
descriptions. Activate the new vector regsets if applicable.
(initialize_low_arch): Also invoke init_registers_s390_vx_linux64,
init_registers_s390_tevx_linux64, init_registers_s390x_vx_linux64,
and init_registers_s390x_tevx_linux64.
Recognize S/390 targets with the new vector feature and present their
vector registers appropriately: as 32 new 128-bit wide registers
v0-v31, where the first 16 embed the floating point registers f0-f15.
Each of the full registers v0-v15 is modelled as a pseudo register.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_vxrs): New static variable.
(s390_linux_fetch_inferior_registers): Handle vector registers, if
present.
(s390_linux_store_inferior_registers): Likewise.
(s390_get_hwcap): Remove function. Embed its logic...
(s390_read_description): ...here. Yield a target description with
vector registers if applicable.
* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
"features/s390x-tevx-linux64.c".
(struct gdbarch_tdep) <v0_full_regnum>: New field.
(s390_dwarf_regmap): Add vector registers. Remove bogus entries
for "GNU/Linux-specific registers".
(s390_dwarf_reg_r0l): New enum value.
(s390_dwarf_reg_to_regnum): Support vector registers.
(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
of GPR lower halves.
(regnum_is_vxr_full): New function.
(s390_register_name): New function.
(s390_pseudo_register_name): Handle v0-v15, which are composed of
f0-f15 and v0l-v15l.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_value_from_register): Account for the fact that values are
placed left-justified in vector registers.
(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
the vector reggroup and omit them from the general reggroup.
(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
(s390_iterate_over_regset_sections): Add iterations for the two
new vector regsets.
(s390_core_read_description): Yield a target description with
vector registers if applicable.
(s390_gdbarch_init): Handle target descriptions with vector
registers. Add "register_name" gdbarch method.
(_initialize_s390_tdep): Call new tdesc initialization functions.
* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
(S390_NUM_REGS): Adjust value.
(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
* NEWS: Announce S/390 vector register support.
The IBM z13 has new vector registers v0-v31 which are presented by the
Linux kernel as two additional register sets. This patch adds XML
descriptions and the respective autogenerated .c and .dat files for
S390 targets with this feature. Note that supported combinations
include targets with and without a transactional execution facility.
gdb/ChangeLog:
* features/s390-tevx-linux64.xml: New file.
* features/s390-vx-linux64.xml: New file.
* features/s390-vx.xml: New file.
* features/s390x-tevx-linux64.xml: New file.
* features/s390x-vx-linux64.xml: New file.
* features/Makefile (WHICH): Add s390-vx-linux64,
s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
(s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
(s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
macros.
* features/s390-tevx-linux64.c: New generated file.
* features/s390-vx-linux64.c: Likewise.
* features/s390x-tevx-linux64.c: Likewise.
* features/s390x-vx-linux64.c: Likewise.
* regformats/s390-tevx-linux64.dat: Likewise.
* regformats/s390-vx-linux64.dat: Likewise.
* regformats/s390x-tevx-linux64.dat: Likewise.
* regformats/s390x-vx-linux64.dat: Likewise.
gdb/doc/ChangeLog:
* gdb.texinfo (S/390 and System z Features): Describe new feature
"org.gnu.gdb.s390.vx".
Git commit 3c14e5a39b added a declaration for
gdb_agent_get_raw_reg to tracepoint.h, and this now caught that the
32-bit x86 implementation has the wrong prototype:
../../../src/gdb/gdbserver/linux-i386-ipa.c:103:1: error: conflicting types for ‘gdb_agent_get_raw_reg’
gdb_agent_get_raw_reg (unsigned char *raw_regs, int regnum)
^
In file included from ../../../src/gdb/gdbserver/linux-i386-ipa.c:24:0:
../../../src/gdb/gdbserver/tracepoint.h:168:31: note: previous declaration of ‘gdb_agent_get_raw_reg’ was here
IP_AGENT_EXPORT_FUNC ULONGEST gdb_agent_get_raw_reg
^
make[2]: *** [linux-i386-ipa.o] Error 1
gdb/gdbserver/
2015-03-01 Pedro Alves <palves@redhat.com>
* linux-i386-ipa.c (gdb_agent_get_raw_reg): Constify 'raw_regs'
parameter.
New option for objcopy --update-section allows the contents of a section
to be updated while maintaining the section flags, and, for ELF files,
the section to segment mapping.
New test uses --dump-section and --update-section to check that a
section can be made larger and smaller with an update.
binutils/ChangeLog:
* objcopy.c (update_sections): New list.
(command_line_switch): Add OPTION_UPDATE_SECTION.
(copy_options): Add update-section.
(copy_usage): Document new option.
(is_update_section): New function.
(is_strip_section_1): Add check for attempt to update and remove
the same section.
(copy_object): Update size and content of requested sections.
(skip_section): Don't copy for updated sections.
(copy_main): Handle --update-section.
* doc/binutils.texi (objcopy): Add description of --update-section
option.
* NEWS: Mention --update-section option.
binutils/testsuite/ChangeLog:
* binutils-all/update-1.s: New file.
* binutils-all/update-2.s: New file.
* binutils-all/update-3.s: New file.
* binutils-all/update-4.s: New file.
* binutils-all/update-section.exp: New file.
gas/
* write.c (SUB_SEGMENT_ALIGN): Don't pad non-code sections at
end to their alignment.
gas/testsuite/
* gas/sparc/pcrel.d: Update for changed padding in data sections.
* gas/sparc/pcrel64.d: Likewise.
ld/testsuite/
* ld-sparc/gotop32.rd: Update for changed padding in data sections.
* ld-sparc/gotop32.td: Likewise.
* ld-sparc/gotop64.rd: Likewise.
* ld-sparc/gotop64.td: Likewise.
* ld-tilegx/external.s: Align .data.
* ld-tilepro/external.s: Likewise.
This patch is cosmetic. It prevents references to __tls_get_addr_opt
(an alias for __tls_get_addr) when the optimisation isn't possible.
* elf32-ppc.c (ppc_elf_tls_setup): Set no_tls_get_addr_opt if
not PLT_NEW.
We can convert mov to lea only if there are R_386_GOT32/R_X86_64_GOTPCREL
relocations against non IFUNC symbols.
* elf32-i386.c (need_convert_mov_to_lea): New.
(elf_i386_check_relocs): Set need_convert_mov_to_lea if needed.
(elf_i386_convert_mov_to_lea): Return TRUE if
need_convert_mov_to_lea is unset.
* elf64-x86-64.c (need_convert_mov_to_lea): New.
(elf_x86_64_check_relocs): Set need_convert_mov_to_lea if needed.
(elf_x86_64_convert_mov_to_lea): Return TRUE if
need_convert_mov_to_lea is unset.
