* config/gas/bfin-parse.y (asm_1): Clean up and unify error handling
for load and store insns.
(neg_value): Delete function.
testsuite/
From Bernd Schmidt <bernd.schmidt@analog.com>
* gas/bfin/expected_errors.l, gas/bfin/expected_errors.s:
Check error messages for invalid load/store insns.
(read_a_source_file): Pass the beginning of the symbol through
the new argument of TC_START_LABEL.
* config/tc-arm.h (TC_START_LABEL): Add a new argument.
* config/tc-bfin.c (bfin_start_label): Only search '(' and '['
from the beginning of the symbol.
* config/tc-bfin.h (TC_START_LABEL): Add the new argument.
* config/tc-d30v.h (TC_START_LABEL): Likewise.
* config/tc-fr30.h (TC_START_LABEL): Likewise.
* config/tc-m32c.h (TC_START_LABEL): Likewise.
* config/tc-m32r.h (TC_START_LABEL): Likewise.
* config/tc-mep.h (TC_START_LABEL): Likewise.
testsuite/
* gas/bfin/stack2.s: Add pop multiple instruction with a label
on the same line.
* gas/bfin/stack2.d: Adjust accordingly.
* config/tc-arm.c (do_t_mov_cmp): Do not silently ignore shifted
operands.
* gas/arm/t16-bad.l: Update expected messages for moves with
shifted operands.
* config/tc-arm.c (marked_pr_dependency, mapstate): Delete global
variables.
(mapping_state): Use the section's mapstate.
(mapping_state_2): Likewise. Skip special sections.
(s_arm_unwind_fnend): Use the section's marked_pr_dependency.
(arm_elf_change_section): Do not set deleted globals.
* config/tc-arm.h (struct arm_segment_info_type): Document
marked_pr_dependency.
gas/testsuite/
* gas/arm/mapping2.s: Test code after .ident.
* binutils-all/arm/thumb2-cond.s: Use instructions instead of
.short.
gas/
* config/obj-elf.c (obj_elf_ident): Notify section change to the hook.
* config/tc-arm.c (make_mapping_symbol): New function, from
mapping_state. Save mapping symbols in the frag.
(insert_data_mapping_symbol): New.
(mapping_state): Use make_mapping_symbol, improve state transitions.
(mapping_state_2): New. Provide dummy definition.
(opcode_select): Do not call mapping_state.
(s_bss): Call md_elf_section_change_hook instead of mapping_state.
(output_inst): Update use of tc_frag_data.
(new_automatic_it_block): Call mapping_state before emitting the
IT instruction.
(md_assemble): Move mapping_state to just before outputting the
new instruction.
(arm_handle_align): Update use of tc_frag_data.
Call insert_data_mapping_symbol.
(arm_init_frag): Update use of tc_frag_data. Call
mapping_state_2.
(arm_elf_change_section): Always update the mapping symbol FSM state.
(check_mapping_symbols): New function.
(arm_adjust_symtab): Use check_mapping_symbols.
* config/tc-arm.h (struct arm_frag_type): New.
(TC_FRAG_TYPE): Change to struct arm_frag_type.
(TC_FRAG_INIT): Pass max_chars.
(arm_init_frag): Update prototype.
gas/testsuite/
* gas/arm/mapdir.d, gas/arm/mapdir.s: New files.
* gas/arm/mapping.d: Adapted to new symbols generation.
* gas/arm/mapping2.d: New test case.
* gas/arm/mapping2.s: New file.
* gas/arm/mapping3.d: New test case.
* gas/arm/mapping3.s: New file.
* gas/arm/mapping4.d: New test case.
* gas/arm/mapping4.s: New file.
* gas/arm/mapshort-eabi.d: Adapted to new symbols generation.
* gas/elf/section2.e-armeabi: Adapted to new symbols generation.
2009-07-27 Jan Beulich <jbeulich@novell.com>
* obj-elf.c (elf_file_symbol): Replace symbol name set up by
symbol_new() with the passed in, unmodified one.
gas/testsuite/
2009-07-27 Jan Beulich <jbeulich@novell.com>
* gas/elf/file.[ds]: New.
* gas/elf/elf.exp: Run new test.
gnu_unique_object.
* doc/as.texinfo: Document new feature of .type directive.
* NEWS: Mention support for gnu_unique_object symbol type.
* common.h (STB_GNU_UNIQUE): Define.
* NEWS: Mention the linker's support for symbols with a binding of
STB_GNU_UNIQUE.
* gas/elf/type.s: Add unique global symbol definition.
* gas/elf/type.e: Add expected readelf output for global unique
symbol.
* elfcpp.h (enum STB): Add STB_GNU_UNIQUE.
* readelf.c (get_symbol_binding): For Linux targeted files return
UNIQUE for symbols with the STB_GNU_UNIQUE binding.
* doc/binutils.texi: Document the meaning of the 'u' symbol
binding in the output of nm and objdump --syms.
* elf-bfd.h (struct elf_link_hash_entry): Add unique_global field.
* elf.c (swap_out_syms): Set binding to STB_GNU_UNIQUE for symbols
with the BSF_GNU_UNIQUE flag bit set.
* elfcode.h (elf_slurp_symbol_table): Set the BSF_GNU_UNIQUE flag
for symbols with STB_GNU_UNIQUE binding.
* elflink.c (_bfd_elf_merge_symbol): Set unique_global for symbols
with the STB_GNU_UNIQUE binding.
(elf_link_add_object_symbols): Set the BSF_GNU_UNIQUE flag for
symbols with STB_GNU_UNIQUE binding. Set STB_GNU_UNIQUE for
symbols with the unique_global field set.
(elf_link_output_extsym): Set unique_global field for symbols with
the STB_GNU_UNIQUE binding.
* syms.c (struct bfd_symbol): Define BSF_GNU_UNIQUE flag bit.
(bfd_print_symbol_vandf): Print a 'u' character for BSF_GNU_UNIQUE
symbols.
(bfd_decode_symclass): Return a 'u' character for BSF_GNU_UNIQUE
symbols.
* bfd-in2.h: Regenerate.
2009-07-21 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10420
* config/tc-i386.c (i386_align_code): Tune for 32bit nops in
64bit.
(i386_target_format): Set cpu_arch_isa_flags.bitfield.cpulm
for 64bit.
gas/testsuite/
2009-07-21 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10420
* gas/i386/i386.exp: Run x86-64-nops-1-pentium.
* gas/i386/x86-64-nops-1-pentium.d: New.
(MAX_MEM_FOR_RS_ALIGN_CODE): Define in terms of
MAX_MEM_ALIGNMENT_BYTES.
* config/tc-arm.c (arm_frag_align_code): Replace hard coded
constant with MAX_MEM_FOR_RS_ALIGN_CODE.
* gas/arm/align64.s: New test case.
* gas/arm/align64.d: Expected disassembly.
* config/tc-arm.c (md_assemble): Added validation.
gas/testsuite
* gas/arm/thumb-w-bad.d: New test case.
* gas/arm/thumb-w-bad.l: New file.
* gas/arm/thumb-w-bad.s: New file.
* gas/arm/thumb-w-good.d: New test case.
* gas/arm/thumb-w-good.s: New file.
(set_it_insn_type_nonvoid): New macro.
(emit_thumb32_expr): New function.
(thumb_insn_size): New function.
(emit_insn): New function.
(s_arm_elf_inst): New function.
(md_pseudo_table): New pseudo-opcode entries added.
* doc/c-arm.texi: New directive added.
* gas/arm/inst-po.d: New testcase.
* gas/arm/inst-po.s: New file.
* gas/arm/inst-po-2.d: New testcase.
* gas/arm/inst-po-2.s: New file.
* gas/arm/inst-po-2.l: New file.
* gas/arm/inst-po-3.d: New testcase.
* gas/arm/inst-po-3.s: New file.
* gas/arm/inst-po-be.d: New testcase.
* arm-dis.c (coprocessor): Print the LDC and STC versions of the
LFM and SFM instructions as comments,.
Improve consistency of formatting for instructions displayed as
comments and decimal values displayed with their hexadecimal
equivalents.
Formatting tidy ups.
Updated expected disassembler regexps.
* arm-dis.c (enum opcode_sentinels): New: Used to mark the
boundary between variaant and generic coprocessor instuctions.
(coprocessor): Use it.
Fix architecture version of MCRR and MRRC instructions.
(arm_opcdes): Fix patterns for STRB and STRH instructions.
(print_insn_coprocessor): Check architecture and extension masks.
Print a hexadecimal version of any decimal constant that is
outside of the range of -16 to +32.
(print_arm_address): Add a return value of the offset used in the
adress, if it is worth printing a hexadecimal version of it.
(print_insn_neon): Print a hexadecimal version of any decimal
constant that is outside of the range of -16 to +32.
(print_insn_arm): Likewise.
(print_insn_thumb16): Likewise.
(print_insn_thumb32): Likewise.
PR 10297
* arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
of an undefined instruction.
(arm_opcodes): Use it.
(thumb_opcod): Use it.
(thumb32_opc): Use it.
Update expected disassembly regrexps in GAS and LD testsuites.
(implicit_it_mode): New global.
(it_instruction_type): New enum.
(arm_parse_it_mode): New function.
(arm_long_opts): New option added.
(arm_it): New field.
(it_state): New enum.
(now_it): New macro.
(check_it_blocks_finished): New function.
(insns[]): Use the IT Thumb opcodes for ARM too.
(arm_cleanup): Call check_it_blocks_finished.
(now_it_compatible): New function.
(conditional_insn): New function.
(set_it_insn_type): New macro.
(set_it_insn_type_last): New macro.
(do_it): Call automatic IT machinery functions.
(do_t_add_sub): Likewise
(do_t_arit3): Likewise.
(do_t_arit3c): Likewise.
(do_t_blx): Likewise.
(do_t_branch): Likewise.
(do_t_bkpt): Likewise.
(do_t_branch23): Likewise.
(do_t_bx): Likewise.
(do_t_bxj): Likewise.
(do_t_cps): Likewise.
(do_t_cpsi): Likewise.
(do_t_cbz): Likewise.
(do_t_it): Likewise.
(encode_thumb2_ldmstm): Likewise.
(do_t_ldst): Likewise.
(do_t_mov_cmp): Likewise.
(do_t_mvn_tst): Likewise.
(do_t_mul): Likewise.
(do_t_neg): Likewise.
(do_t_setend): Likewise.
(do_t_shift): Likewise.
(do_t_tb): Likewise.
(output_it_inst): New function.
(new_automatic_it_block): New function.
(close_automatic_it_block): New function.
(now_it_add_mask): New function.
(it_fsm_pre_encode): New function.
(handle_it_state): New function.
(it_fsm_post_encode): New function.
(force_automatic_it_block_close): New function.
(in_it_block): New function.
(md_assemble): Call automatic IT block machinery functions.
(arm_frob_label): Likewise.
(arm_opts): New element.
* config/tc-arm.h (it_state): New enum.
(current_it): New struct.
(arm_segment_info_type): New member added.
* doc/c-arm.texi: New option -mimplicit-it documented.
* gas/arm/arm-it-auto.d: New test.
* gas/arm/arm-it-auto.s: New file.
* gas/arm/arm-it-auto-2.d: New test case.
* gas/arm/arm-it-auto-2.s: New file.
* gas/arm/arm-it-auto-3.d: New test case.
* gas/arm/arm-it-auto-3.s: New file.
* gas/arm/arm-it-bad.d: New test case.
* gas/arm/arm-it-bad.l: New file.
* gas/arm/arm-it-bad.s: New file.
* gas/arm/arm-it-bad-2.d: New test case.
* gas/arm/arm-it-bad-2.l: New file.
* gas/arm/arm-it-bad-2.s: New file.
* gas/arm/arm-it-bad-3.d: New test case.
* gas/arm/arm-it-bad-3.l: New file.
* gas/arm/arm-it-bad-3.s: New file.
* gas/arm/thumb2_it_auto.d: New test.
* gas/arm/thumb2_it_bad.l: Error message updated.
* gas/arm/thumb2_it_bad_auto.d: New test.
* gas/arm/thumb2_it.d: Comment added.
* gas/arm/thumb2_it_bad.d: Comment added.
* gas/tc-arm.c (do_t_ssat): Move common code from here...
(do_t_usat): ... and here to...
(do_t_ssat_usat): New function: ... here. Add code to check that
the shift value, if present, is in range.
* gas/arm/thumb2_bad_reg.s: Add tests for SSAT and USAT with an
out of range shift.
* gas/arm/thumb2_bad_reg.l: Update expected error messages.
* arm-dis.c (print_insn_coprocessor): Check that a user specified
ARM architecture supports the matched instruction.
(print_insn_arm): Likewise.
(select_arm_features): New function. Fills in the fields of an
arm_feature_set structure based on a given arm machine number.
(print_insn): Initialise an arm_feature_set structure.
* objdump.c (disassemble_bytes): Set the
USER_SPECIFIED_MACHINE_TYPE flag in the disassemble_info structure
if the user has invoked the -m switch.
* doc/binutils.texi: Document the additional behaviour of
objdump's -m switch for ARM targets.
* dis-asm.h (USER_SPECIFIED_MACHINE_TYPE): New value for the flags
field of struct disassemble_info.
* gas/arm/align.s: Add labels so that COFF based targets can
correctly locate THUMB code.
* gas/arm/copro.d: Do not pass --architecture switch to objdump.
* arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
instruction.
* gas/arm/thumb32.d: Fix expected binary value of SEV.W instruction.
* config/tc-arm.c (T16_32_TAB): Fix binary value of SEV.W
instruction.
