This makes a parameter of to_info_proc const and then fixes up some
fallout, including parameters in a couple of gdbarch methods.
I could not test the procfs.c change. I verified it by inspection.
If this causes an error here, it will be trivial to fix.
2014-06-16 Tom Tromey <tromey@redhat.com>
* target.h (struct target_ops) <to_info_proc>: Make parameter
const.
(target_info_proc): Update.
* target.c (target_info_proc): Make "args" const.
* procfs.c (procfs_info_proc): Update.
* linux-tdep.c (linux_info_proc): Update.
(linux_core_info_proc_mappings): Make "args" const.
(linux_core_info_proc): Update.
* gdbarch.sh (info_proc, core_info_proc): Make "args" const.
* gdbarch.c: Rebuild.
* gdbarch.h: Rebuild.
* corelow.c (core_info_proc): Update.
This patch fixes a problem that prevented use of the Dwarf unwinders on SPU,
because dwarf2-frame.c common code did not support the situation where the
stack and/or frame pointer is maintained in a *vector* register. This is
because read_addr_from_reg is hard-coded to assume that such pointers can
be read from registers via a simple get_frame_register / unpack_pointer
operation.
Now, there *is* a routine address_from_register that calls into the
appropriate tdep routines to handle pointer values in "weird" registers
like on SPU, but it turns out I cannot simply change dwarf2-frame.c to
use address_from_register. This is because address_from_register uses
value_from_register to create a (temporary) value, and that routine
at some point calls get_frame_id in order to set up that value's
VALUE_FRAME_ID entry.
However, the dwarf2-frame.c read_addr_from_reg routine will be called
during early unwinding (to unwind the frame's CFA), at which point the
frame's ID is not actually known yet! This would cause an assert.
On the other hand, we may notice that VALUE_FRAME_ID is only needed in the
value returned by value_from_register if that value is later used as an
lvalue. But this is obviously never done to the temporary value used in
address_from_register. So, if we could change address_from_register to
not call value_from_register but instead accept constructing a value
that doesn't have VALUE_FRAME_ID set, things should be fine.
To do that, we can change the value_from_register callback to accept
a FRAME_ID instead of a FRAME; the only existing uses of the FRAME
argument were either to extract its frame ID, or its gdbarch. (To
keep a way of getting at the latter, we also change the callback's
type from "f" to "m".) Together with the required follow-on changes
in the existing value_from_register implementations (including the
default one), this seems to fix the problem.
As another minor interface cleanup, I've removed the explicit TYPE
argument from address_from_register. This routine really always
uses a default pointer type, and in the new implementation it -to
some extent- relies on that fact, in that it will now no longer
handle types that require gdbarch_convert_register_p handling.
gdb:
2014-04-17 Ulrich Weigand <uweigand@de.ibm.com>
* gdbarch.sh (value_from_register): Make class "m" instead of "f".
Replace FRAME argument with FRAME_ID.
* gdbarch.c, gdbarch.h: Regenerate.
* findvar.c (default_value_from_register): Add GDBARCH argument;
replace FRAME by FRAME_ID. No longer call get_frame_id.
(value_from_register): Update call to gdbarch_value_from_register.
* value.h (default_value_from_register): Update prototype.
* s390-linux-tdep.c (s390_value_from_register): Update interface
and call to default_value_from_register.
* spu-tdep.c (spu_value_from_register): Likewise.
* findvar.c (address_from_register): Remove TYPE argument.
Do not call value_from_register; use gdbarch_value_from_register
with null_frame_id instead.
* value.h (address_from_register): Update prototype.
* dwarf2-frame.c (read_addr_from_reg): Use address_from_register.
* dwarf2loc.c (dwarf_expr_read_addr_from_reg): Update for
address_from_register interface change.
Necessary to fix parsing auxv entries from core files on systems that use
the layout specified by ELF instead of the incompatible variant used by Linux.
gdb/Changelog:
* gdbarch.sh (auxv_parse): New.
* gdbarch.h: Regenerated.
* gdbarch.c: Regenerated.
* auxv.c (target_auxv_parse): Call gdbarch_parse_auxv if provided.
This patch removes startup_gdbarch because it is not used anymore.
After this patch,
[PATCH] Multi-process + multi-arch: GDB
https://sourceware.org/ml/gdb-patches/2012-11/msg00228.html
global variable target_gdbarch is removed and gdbarch becomes
per-inferior. Then, we don't have to keep global variable
startup_gdbarch.
Rebuild GDB with all targets. Is it OK?
gdb:
2014-02-18 Yao Qi <yao@codesourcery.com>
PR gdb/16220
* gdbarch.sh: Remove startup_gdbarch.
* gdbarch.c: Regenerated.
* gdbarch.h: Likewise.
This patch documents the return value of core_xfer_shared_libraries_aix
and core_xfer_shared_libraries gdbarch methods, and changes return
type to ULONGEST from LONGEST.
In a following patch, core_xfer_partial. is changed to check their
return values and return an appropriate target_xfer_status.
gdb:
2014-02-07 Yao Qi <yao@codesourcery.com>
* gdbarch.sh (core_xfer_shared_libraries): Returns ULONGEST. Add
comments.
(core_xfer_shared_libraries_aix): Likewise.
* gdbarch.c, gdbarch.h: Regenerated.
* i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Return
ULONGEST. Change 'len_avail' type to ULONGEST.
* rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
* rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
declaration.
(rs6000_aix_core_xfer_shared_libraries_aix): Return ULONGEST.
This patch handles another aspect of the ELFv2 ABI, which unfortunately
requires common code changes.
In ELFv2, functions may provide both a global and a local entry point.
The global entry point (where the function symbol points to) is intended
to be used for function-pointer or cross-module (PLT) calls, and requires
r12 to be set up to the entry point address itself. The local entry
point (which is found at a fixed offset after the global entry point,
as defined by bits in the symbol table entries' st_other field), instead
expects r2 to be set up to the current TOC.
Now, when setting a breakpoint on a function by name, you really want
that breakpoint to trigger either way, no matter whether the function
is called via its local or global entry point. Since the global entry
point will always fall through into the local entry point, the way to
achieve that is to simply set the breakpoint at the local entry point.
One way to do that would be to have prologue parsing skip the code
sequence that makes up the global entry point. Unfortunately, this
does not work reliably, since -for optimized code- GDB these days
will not actuall invoke the prologue parsing code but instead just
set the breakpoint at the symbol address and rely on DWARF being
correct at any point throughout the function ...
Unfortunately, I don't really see any way to express the notion of
local entry points with the current set of gdbarch callbacks.
Thus this patch adds a new callback, skip_entrypoint, that is
somewhat analogous to skip_prologue, but is called every time
GDB needs to determine a function start address, even in those
cases where GDB decides to not call skip_prologue.
As a side effect, the skip_entrypoint implementation on ppc64
does not need to perform any instruction parsing; it can simply
rely on the local entry point flags in the symbol table entry.
With this implemented, two test cases would still fail to set
the breakpoint correctly, but that's because they use the construct:
gdb_test "break *hello"
Now, using "*hello" explicitly instructs GDB to set the breakpoint
at the numerical value of "hello" treated as function pointer, so
it will by definition only hit the global entry point.
I think this behaviour is unavoidable, but acceptable -- most people
do not use this construct, and if they do, they get what they
asked for ...
In one of those two test cases, use of this construct is really
not appropriate. I think this was added way back when as a means
to work around prologue skipping problems on some platforms. These
days that shouldn't really be necessary any more ...
For the other (step-bt), we really want to make sure backtracing
works on the very first instruction of the routine. To enable that
test also on powerpc64le-linux, we can modify the code to call the
test function via function pointer (which makes it use the global
entry point in the ELFv2 ABI).
gdb/ChangeLog:
* gdbarch.sh (skip_entrypoint): New callback.
* gdbarch.c, gdbarch.h: Regenerate.
* symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint.
* infrun.c (fill_in_stop_func): Likewise.
* ppc-linux-tdep.c: Include "elf/ppc64.h".
(ppc_elfv2_elf_make_msymbol_special): New function.
(ppc_elfv2_skip_entrypoint): Likewise.
(ppc_linux_init_abi): Install them for ELFv2.
gdb/testsuite/ChangeLog:
* gdb.base/sigbpt.exp: Do not use "*" when setting breakpoint
on a function.
* gdb.base/step-bt.c: Call hello via function pointer to make
sure its first instruction is executed on powerpc64le-linux.
Add new methods to gdbarch for analyzing the instruction at a given address.
Implement those methods for i386 and amd64 architectures.
This is needed by "record btrace" to detect function calls in the
execution trace.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
(amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
(amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
to gdbarch.
* i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
(i386_insn_is_jump, i386_jmp_p): New.
(i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
insn_is_jump to gdbarch.
* gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
* gdbarch.h: Regenerated.
* gdbarch.c: Regenerated.
* arch-utils.h (default_insn_is_call, default_insn_is_ret)
(default_insn_is_jump): New.
* arch-utils.c (default_insn_is_call, default_insn_is_ret)
(default_insn_is_jump): New.
This patch changes the type of 'len' from LONGEST to ULONGEST. 'len'
is the argument of gdbarch methods core_xfer_shared_libraries and
core_xfer_shared_libraries_aix.
gdb:
2014-01-14 Yao Qi <yao@codesourcery.com>
* gdbarch.sh (core_xfer_shared_libraries): Change its argument
'len''s type to ULONGEST.
(core_xfer_shared_libraries_aix): Likewise.
* gdbarch.c, gdbarch.h: Reenerated.
* i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
Change type of 'len' to ULONGEST.
* rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
(rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
This patch changes the return type of gdbarch_byte_order and
gdbarch_byte_order_for_code, from 'int' to 'enum bfd_endian'.
gdb:
2014-01-07 Yao Qi <yao@codesourcery.com>
* gdbarch.sh (byte_order, byte_order_for_code): Change type to
'enum bfd_endian'.
(struct gdbarch_info) <byte_order>: Change type to
'enum bfd_endian'.
<byte_order_for_code>: Likewise.
* gdbarch.c, gdbarch.h: Regenerated.
This patch extends the current generic parser for SystemTap SDT probe
arguments. It can be almost considered a cleanup, but the main point of
it is actually to allow the generic parser to accept multiple prefixes
and suffixes for the its operands (i.e., integers, register names, and
register indirection).
I have chosen to implement this as a list of const strings, and declare
this list as "static" inside each target's method used to initialize
gdbarch.
This patch is actually a preparation for an upcoming patch for ARM,
which implements the support for multiple integer prefixes (as defined
by ARM's asm spec). And AArch64 will also need this, for the same
reason.
This patch was regtested on all architectures that it touches (i.e.,
i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found.
2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com>
* amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe
argument prefixes and suffixes. Initialize gdbarch with them.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* gdbarch.sh (stap_integer_prefix, stap_integer_suffix)
(stap_register_prefix, stap_register_suffix)
(stap_register_indirection_prefix)
(stap_register_indirection_suffix): Declare as "const char *const
*" instead of "const char *". Adjust printing function. Rename
all of the variables to the plural.
(pstring_list): New function.
* i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe
argument prefixes and suffixes. Initialize gdbarch with them.
* ia64-linux-tdep.c (ia64_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* stap-probe.c (stap_is_generic_prefix): New function.
(stap_is_register_prefix): Likewise.
(stap_is_register_indirection_prefix): Likewise.
(stap_is_integer_prefix): Likewise.
(stap_generic_check_suffix): Likewise.
(stap_check_integer_suffix): Likewise.
(stap_check_register_suffix): Likewise.
(stap_check_register_indirection_suffix): Likewise.
(stap_parse_register_operand): Remove unecessary declarations for
variables holding prefix and suffix information. Use the new
functions listed above for checking for prefixes and suffixes.
(stap_parse_single_operand): Likewise.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
It will be used when one wants to convert between the internal GDB signal
representation (enum gdb_signal) and the target's representation.
The idea of this patch came from a chat between Pedro and I on IRC, plus
the discussion of my patches to add the new $_exitsignal convenience
variable:
<http://sourceware.org/ml/gdb-patches/2013-06/msg00452.html>
<http://sourceware.org/ml/gdb-patches/2013-06/msg00352.html>
What I did was to investigate, on the Linux kernel, which targets shared
the signal numbers definition with the generic definition, present at
<include/uapi/asm-generic/signal.h>. For the record, I used linux-3.10-rc7
as the main source of information, always looking at
<arch/<ARCH_NAME>/include/uapi/asm/signal.h>. For SIGRTMAX (which defaults
to _NSIG in most cases), I had to look at different signal-related
files, but most of them (except MIPS) were defined to 64 anyway.
Then, with all the differences in hand, I implemented the bits on each
target.
2013-08-09 Sergio Durigan Junior <sergiodj@redhat.com>
* linux-tdep.c: Define enum with generic signal numbers.
(linux_gdb_signal_from_target): New function.
(linux_gdb_signal_to_target): Likewise.
(linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
methods to the functions above.
* linux-tdep.h (linux_gdb_signal_from_target): New prototype.
(linux_gdb_signal_to_target): Likewise.
* alpha-linux-tdep.c: Define new enum with signals different
from generic Linux kernel.
(alpha_linux_gdb_signal_from_target): New function.
(alpha_linux_gdb_signal_to_target): Likewise.
(alpha_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
with the functions mentioned above.
* avr-tdep.c: Define enum with differences between Linux kernel
and AVR signals.
(avr_linux_gdb_signal_from_target): New function.
(avr_linux_gdb_signal_to_target): Likewise.
(avr_gdbarch_init): Set gdbarch_gdb_signal_{to,from}_target to
the functions mentioned above.
* sparc-linux-tdep.c: Define enum with differences between SPARC
and generic Linux kernel signal numbers.
(sparc32_linux_gdb_signal_from_target): New function.
(sparc32_linux_gdb_signal_to_target): Likewise.
(sparc32_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
to the functions defined above.
* xtensa-linux-tdep.c: Define enum with differences between
Xtensa and Linux kernel generic signals.
(xtensa_linux_gdb_signal_from_target): New function.
(xtensa_linux_gdb_signal_to_target): Likewise.
(xtensa_linux_init_abi): Set gdbarch_gdb_signal_to_target
to the functions defined above.
* mips-linux-tdep.c: Define enum with differences between
signals in MIPS and Linux kernel generic ones.
(mips_gdb_signal_to_target): New function.
(mips_gdb_signal_from_target): Redefine to use new enum, handle
only different signals from the Linux kernel generic.
(mips_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target
the functions defined above.
* mips-linux-tdep.h (enum mips_signals): Remove.
The current code attempts to provide relocation support when debugging
core files via the rs6000_xfer_partial method of the rs6000-nat
target_ops vector. However, this target_ops vector does not get pushed
on the target stack at all when debugging core files, thus bypassing
completely that part of the code.
This patch fixes the problem by extending corelow's core_xfer_partial
into handling the TARGET_OBJECT_LIBRARIES_AIX object.
gdb/ChangeLog:
* gdbarch.sh (core_xfer_shared_libraries_aix): New method.
* gdbarch.h, gdbarch.c: Regenerate.
* corelow.c (core_xfer_partial): Add TARGET_OBJECT_LIBRARIES_AIX
handling.
* rs6000-aix-tdep.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add rs6000-aix-tdep.h.
* rs6000-aix-tdep.c: Include "rs6000-aix-tdep.h" and
"xml-utils.h".
(struct field_info, struct ld_info_desc): New types.
(ld_info32_desc, ld_info64_desc): New static constants.
(struct ld_info): New type.
(rs6000_aix_extract_ld_info): New function.
(rs6000_aix_shared_library_to_xml): Likewise.
(rs6000_aix_ld_info_to_xml): Likewise.
(rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
(rs6000_aix_init_osabi): Add call to
set_gdbarch_core_xfer_shared_libraries_aix.
* rs6000-nat.c: Add "rs6000-aix-tdep.h" include.
Remove "xml-utils.h" include.
(LdInfo): Delete typedef.
(ARCH64_DECL, LDI_FIELD, LDI_NEXT, LDI_FD, LDI_FILENAME):
Delete macros.
(rs6000_ptrace_ldinfo): Change return type to gdb_byte *.
Adjust code accordingly.
(rs6000_core_ldinfo): Delete, folded into
rs6000_aix_core_xfer_shared_libraries_aix.
(rs6000_xfer_shared_library): Delete.
(rs6000_xfer_shared_libraries): Reimplement.
Denys Vlasenko <dvlasenk@redhat.com>
Pedro Alves <palves@redhat.com>
* gdbarch.sh (elfcore_write_linux_prpsinfo): New F hook.
(struct elf_internal_linux_prpsinfo): Forward declare.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c: Include `cli/cli-utils.h'.
(linux_fill_prpsinfo): New function.
(linux_make_corefile_notes): Use linux_fill_prpsinfo. If there's
an elfcore_write_linux_prpsinfo hook, use it, otherwise, use
elfcore_write_linux_prpsinfo32 or elfcore_write_linux_prpsinfo64
depending on gdbarch pointer bitness.
* ppc-linux-tdep.c: Include elf-bfd.h.
(ppc_linux_init_abi): Hook in elfcore_write_ppc_linux_prpsinfo32
on 32-bit.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
copyright.py was updating gdbarch.sh' copyright years, but not
the function that genarates the copyright headers for gdbarch.[hc].
This patch makes the following changes:
- fixes gdbarch.sh and regenerates gdbarch.[hc]
- Modify copyright.py to remind the user to update gdbarch.sh
by hand. This should also remind the user to rerun the script
and update gdbarch.[hc] - see next point;
- Allow copyright.py to update gdbarch.[hc]'c copyright years,
even though these are generated files; This should free
the user from having to update gdbarch.[hc] himself;
gdb/ChangeLog:
* gdbarch.sh (copyright): Update copyright years.
* gdbarch.h, gdbarch.c: Regenerate.
* copyright.py (EXCLUDE_LIST): Remove gdbarch.h and gdbarch.c.
(MULTIPLE_COPYRIGHT_HEADERS): Add 'gdb/gdbarch.sh'.
2012-11-09 Pedro Alves <palves@redhat.com>
* gdbarch.sh (target_gdbarch) <gdbarch.h>: Reimplement as macro.
(get_target_gdbarch) <gdbarch.h>: New function.
(startup_gdbarch) <gdbarch.h>: Declare.
<gdbarch.c> (target_gdbarch): Delete.
<gdbarch.c> (deprecated_target_gdbarch_select_hack): Set the
current inferior's gdbarch.
<gdbarch.c> (get_target_gdbarch): New function.
* inferior.c: Include target-descriptions.h.
(free_inferior): Free target description info.
(add_inferior_with_spaces): Set the inferior's initial
architecture.
(clone_inferior_command): Copy the original inferior's target
description if it was user specified.
(initialize_inferiors): Add comment.
* inferior.h (struct target_desc_info): Forward declare.
(struct inferior) <gdbarch>: New field.
* linux-nat.c: Include target-descriptions.h.
(linux_child_follow_fork): Copy the parent's architecture and
target description to the child.
* target-descriptions.c: Include inferior.h.
(struct target_desc_info): New structure, holding the equivalents
of ...
(target_desc_fetched, current_target_desc)
(target_description_filename): ... these removed globals.
(get_tdesc_info, target_desc_info_from_user_p)
(copy_inferior_target_desc_info, target_desc_info_free): New.
(target_desc_fetched, current_target_desc)
(target_description_filename): Reimplemented as convenience
macros.
(tdesc_filename_cmd_string): New global.
(set_tdesc_filename_cmd): Copy the string manipulated by the "set
tdescs filename ..." commands to the per-inferior equivalent.
(show_tdesc_filename_cmd): Get the value to show from the
per-inferior description filename.
(_initilize_target_descriptions): Change the "set/show tdesc
filename" commands' variable.
* target-descriptions.h (struct target_desc, struct target_desc_info)
(struct inferior): Forward declare.
(target_find_description, target_clear_description)
(target_current_description): Adjust comments.
(copy_inferior_target_desc_info, target_desc_info_free)
(target_desc_info_from_user_p). Declare.
gdb/testsuite/
2012-11-09 Pedro Alves <palves@redhat.com>
* gdb.multi/multi-arch.exp: New.
This patch introduces the "iterate_over_objfiles_in_search_order"
gdbarch method, as well as its default implementation, and converts
the areas where it will matter to using this gdbarch method.
The default method implementation is the only one installed, and
the changes should have no functional impact in terms of behavior.
This only paves the way for the architectures that will need their
own version.
gdb/ChangeLog:
* gdbarch.sh: Add generation of
"iterate_over_objfiles_in_search_order_cb_ftype" typedef in
gdbarch.h. Add include of "objfiles.h" in gdbarch.c.
(iterate_over_objfiles_in_search_order): New gdbarch method.
* gdbarch.h, gdbarch.c: Regenerate.
* objfiles.h (default_iterate_over_objfiles_in_search_order):
Add declaration.
* objfiles.c (default_iterate_over_objfiles_in_search_order):
New function.
* symtab.c (lookup_symbol_aux_objfile): New function, extracted
out of lookup_symbol_aux_symtabs.
(lookup_symbol_aux_symtabs): Replace extracted-out code by
call to lookup_symbol_aux_objfile.
(struct global_sym_lookup_data): New type.
(lookup_symbol_global_iterator_cb): New function.
(lookup_symbol_global): Search for symbol using
gdbarch_iterate_over_objfiles_in_search_order and
lookup_symbol_global_iterator_cb.
* findvar.c (struct minsym_lookup_data): New type.
(minsym_lookup_iterator_cb): New function.
(default_read_var_value) [case LOC_UNRESOLVED]: Resolve the
symbol's address via gdbarch_iterate_over_objfiles_in_search_order
and minsym_lookup_iterator_cb.
* breakpoint.h (bp_location): Add related_address member.
* inferior.h (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
* value.h (using_struct_return): Likewise.
* gdbarch.sh (return_value): Take a pointer to struct value
instead of struct type for the function requested.
* breakpoint.c (set_breakpoint_location_function): Initialize
related_address for bp_gnu_ifunc_resolver breakpoints.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the
requested function's address to gdbarch_return_value.
* eval.c (evaluate_subexp_standard): Pass the requested
function's address to using_struct_return.
* infcall.c (call_function_by_hand): Pass the requested
function's address to using_struct_return and
gdbarch_return_value.
* infcmd.c (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
(print_return_value): Update accordingly.
(finish_command_continuation): Likewise.
* stack.c (return_command): Pass the requested function's
address to using_struct_return and gdbarch_return_value.
* value.c (using_struct_return): Take a pointer to struct value
instead of struct type for the function requested. Pass the
requested function's address to gdbarch_return_value.
* python/py-finishbreakpoint.c (finish_breakpoint_object):
New function_value member, replacing function_type.
(bpfinishpy_dealloc): Update accordingly.
(bpfinishpy_pre_stop_hook): Likewise.
(bpfinishpy_init): Likewise. Record the requested function's
address.
* mips-tdep.c (mips_fval_reg): New enum.
(mips_o32_push_dummy_call): For MIPS16 FP doubles do not swap
words put in GP registers.
(mips_o64_push_dummy_call): Update a comment.
(mips_o32_return_value): Take a pointer to struct value instead
of struct type for the function requested and use it to check if
using the MIPS16 calling convention. Return the designated
general purpose registers for floating-point values returned in
MIPS16 mode.
(mips_o64_return_value): Likewise.
* ppc-tdep.h (ppc_sysv_abi_return_value): Update prototype.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* alpha-tdep.c (alpha_return_value): Take a pointer to struct
value instead of struct type for the function requested.
* amd64-tdep.c (amd64_return_value): Likewise.
* amd64-windows-tdep.c (amd64_windows_return_value): Likewise.
* arm-tdep.c (arm_return_value): Likewise.
* avr-tdep.c (avr_return_value): Likewise.
* bfin-tdep.c (bfin_return_value): Likewise.
* cris-tdep.c (cris_return_value): Likewise.
* frv-tdep.c (frv_return_value): Likewise.
* h8300-tdep.c (h8300_return_value): Likewise.
(h8300h_return_value): Likewise.
* hppa-tdep.c (hppa32_return_value): Likewise.
(hppa64_return_value): Likewise.
* i386-tdep.c (i386_return_value): Likewise.
* ia64-tdep.c (ia64_return_value): Likewise.
* iq2000-tdep.c (iq2000_return_value): Likewise.
* lm32-tdep.c (lm32_return_value): Likewise.
* m32c-tdep.c (m32c_return_value): Likewise.
* m32r-tdep.c (m32r_return_value): Likewise.
* m68hc11-tdep.c (m68hc11_return_value): Likewise.
* m68k-tdep.c (m68k_return_value): Likewise.
(m68k_svr4_return_value): Likewise.
* m88k-tdep.c (m88k_return_value): Likewise.
* mep-tdep.c (mep_return_value): Likewise.
* microblaze-tdep.c (microblaze_return_value): Likewise.
* mn10300-tdep.c (mn10300_return_value): Likewise.
* moxie-tdep.c (moxie_return_value): Likewise.
* mt-tdep.c (mt_return_value): Likewise.
* ppc-linux-tdep.c (ppc_linux_return_value): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Likewise.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* ppcnbsd-tdep.c (ppcnbsd_return_value): Likewise.
* rl78-tdep.c (rl78_return_value): Likewise.
* rs6000-aix-tdep.c (rs6000_return_value): Likewise.
* rx-tdep.c (rx_return_value): Likewise.
* s390-tdep.c (s390_return_value): Likewise.
* score-tdep.c (score_return_value): Likewise.
* sh-tdep.c (sh_return_value_nofpu): Likewise.
(sh_return_value_fpu): Likewise.
* sh64-tdep.c (sh64_return_value): Likewise.
* sparc-tdep.c (sparc32_return_value): Likewise.
* sparc64-tdep.c (sparc64_return_value): Likewise.
* spu-tdep.c (spu_return_value): Likewise.
* tic6x-tdep.c (tic6x_return_value): Likewise.
* v850-tdep.c (v850_return_value): Likewise.
* vax-tdep.c (vax_return_value): Likewise.
* xstormy16-tdep.c (xstormy16_return_value): Likewise.
* xtensa-tdep.c (xtensa_return_value): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
gdb/testsuite/
* gdb.base/return-nodebug.exp: Also test float and double types.
and fields.name members from char * to const char *. All uses updated.
(struct cplus_struct_type): Change type of fn_fieldlists.name member
from char * to const char *. All uses updated.
(type_name_no_tag): Update.
(lookup_unsigned_typename, lookup_signed_typename): Update.
* gdbtypes.c (type_name_no_tag): Change result type
from char * to const char *. All callers updated.
(lookup_unsigned_typename, lookup_signed_typename): Change type of
name parameter from char * to const char *.
* symtab.h (struct cplus_specific): Change type of demangled_name
member from char * to const char *. All uses updated.
(struct general_symbol_info): Change type of name and
mangled_lang.demangled_name members from char * to const char *.
All uses updated.
(symbol_get_demangled_name, symbol_natural_name): Update.
(symbol_demangled_name, symbol_search_name): Update.
* symtab.c (symbol_get_demangled_name): Change result type
from char * to const char *. All callers updated.
(symbol_natural_name, symbol_demangled_name): Ditto.
(symbol_search_name): Ditto.
(completion_list_add_name): Change type of symname,sym_text,
text,word parameters from char * to const char *.
(completion_list_objc_symbol): Change type of sym_text,
text,word parameters from char * to const char *.
* ada-lang.c (find_struct_field): Change type of name parameter
from char * to const char *.
(encoded_ordered_before): Similarly for N0,N1 parameters.
(old_renaming_is_invisible): Similarly for function_name parameter.
(ada_type_name): Change result type from char * to const char *.
All callers updated.
* ada-lang.h (ada_type_name): Update.
* buildsym.c (hashname): Change type of name parameter
from char * to const char *.
* buildsym.h (hashname): Update.
* dbxread.c (end_psymtab): Change type of include_list parameter
from char ** to const char **.
* dwarf2read.c (determine_prefix): Change result type
from char * to const char *. All callers updated.
* f-lang.c (find_common_for_function): Change type of name, funcname
parameters from char * to const char *.
* f-lang.c (find_common_for_function): Update.
* f-valprint.c (list_all_visible_commons): Change type of funcname
parameters from char * to const char *.
* gdbarch.sh (static_transform_name): Change type of name parameter
and result from char * to const char *.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* i386-sol2-tdep.c (i386_sol2_static_transform_name): Change type
of name parameter from char * to const char *.
* jv-lang.c (java_primitive_type_from_name): Ditto.
(java_demangled_signature_length): Similarly for signature parameter.
(java_demangled_signature_copy): Ditto.
(java_demangle_type_signature): Ditto.
* jv-lang.h (java_primitive_type_from_name): Update.
(java_demangle_type_signature): Update.
* objc-lang.c (specialcmp): Change type of a,b parameters
from char * to const char *.
* p-lang.c (is_pascal_string_type): Change type of arrayname parameter
from char * to const char *. All callers updated.
* p-lang.h (is_pascal_string_type): Update.
* solib-frv.c (find_canonical_descriptor_in_load_object): Change type
of name parameter from char * to const char *.
* sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Ditto.
* utils.c (fprintf_symbol_filtered): Ditto.
* defs.h (fprintf_symbol_filtered): Update.
* sparc-tdep.h (sparc_sol2_static_transform_name): Update.
* stabsread.h (end_psymtab): Update.
* stack.c (find_frame_funname): Change type of funname parameter
from char ** to const char **.
* stack.h (find_frame_funname): Update.
* typeprint.c (type_print): Change type of varstring parameter
from char * to const char *.
* value.h (type_print): Update.
* xcoffread.c (xcoff_start_psymtab): Change type of filename parameter
from char * to const char *. All callers updated.
(xcoff_end_psymtab): Change type of include_list parameter
from char ** to const char **. All callers updated.
(swap_sym): Similarly for name parameter. All callers updated.
* coffread.c (patch_type): Add (char*) cast to xfree parameter.
Use xstrdup.
(process_coff_symbol): Use xstrdup.
* stabsread.c (stabs_method_name_from_physname): Renamed from
update_method_name_from_physname. Change result type from void
to char *. All callers updated.
(read_member_functions): In has_destructor case, store name in objfile
obstack instead of malloc space. In !has_stub case, fix mem leak.
* gdbarch.c, gdbarch.h: Regenerate.
* gcore.c (gcore_memory_sections): Try gdbarch find_memory_regions
callback before falling back to target method.
* linux-nat.c (read_mapping, linux_nat_find_memory_regions): Remove.
(linux_target_install_ops): No longer install it.
* linux-tdep.c (linux_find_memory_regions): New function.
(linux_init_abi): Install it.
* gdbarch.c, gdbarch.h: Regenerate.
* infcmd.c (info_proc_cmd_1): Try gdbarch info_proc callback
before falling back to the target info_proc callback.
* linux-nat.c: Do not include "cli/cli-utils.h".
(linux_nat_info_proc): Remove.
(linux_target_install_ops): No longer install it.
* linux-tdep.c: Include "cli/cli-utils.h" and <ctype.h>.
(read_mapping): New function.
(linux_info_proc): Likewise.
(linux_init_abi): Install it.
* gdbarch.sh: New field 'long_long_align_bit'.
* gdbarch.c, gdbarch.h: Regenerate.
* i386-tdep.c (i386_gdbarch_init): Set long_long_align_bit to 32.
* jit.c (jit_read_code_entry): Use it to determine correct size offset.
* tracepoint.c (encode_actions_1): Add case for $_ret.
(validate_actionline): Check for $_ret.
(trace_dump_actions): Ditto.
* ax-gdb.h (gen_trace_for_return_address): Declare.
* ax-gdb.c: Include arch-utils.h.
(gen_trace_for_return_address): New function.
(agent_command): Add return address special case.
* amd64-tdep.c: Include ax.h and ax-gdb.h.
(amd64_gen_return_address): New function.
(amd64_init_abi): Call it.
* i386-tdep.c: Include ax.h and ax-gdb.h.
(i386_gen_return_address): New function.
(i386_init_abi): Call it.
* arch-utils.h (default_gen_return_address): Declare.
* arch-utils.c (default_gen_return_address): New function.
* gdbarch.sh (gen_return_address): New method.
* gdbarch.h, gdbarch.c: Regenerate.
* gdb.texinfo (Tracepoint Action Lists): Document $_ret.
* gdb.trace/collection.exp: Test collection of $_ret.
gdb/ChangeLog:
From Stephen Kitt <steve@sk2.org>
* breakpoint.c, breakpoint.h, cli/cli-dump.c, dwarf2expr.c,
gdbarch.c, gdbarch.sh, remote.c: Various spelling fixes.
gdb/testsuite/ChangeLog:
From Stephen Kitt <steve@sk2.org>
* gdb.base/help.exp: Adjust following some spelling corrections
in GDB.
* dwarf2loc.c (read_pieced_value): Handle get_frame_register_bytes
returning that the register piece is unavailable/optimized out.
(write_pieced_value): Handle get_frame_register_bytes returning
that the register piece is unavailable/optimized out when doing a
read-modify write of a bitfield.
* findvar.c (value_from_register): Handle get_frame_register_bytes
returning that the register piece is unavailable/optimized out.
* frame.c (get_frame_register_bytes): New parameters `optimizedp'
and `unavailablep'. Throw error on bad debug info. Use
frame_register instead of frame_register_read, to fill in the new
arguments.
* frame.h (get_frame_register_bytes): New parameters `optimizedp'
and `unavailablep'.
* valops.c: (value_assign): Adjust, and handle
get_frame_register_bytes failing.
* spu-tdep.c: Include exceptions.h.
(spu_software_single_step): Adjust, and handle
get_frame_register_bytes failing.
(spu_get_longjmp_target): Ditto.
* gdbarch.sh (register_to_value): Change to return int. New
parameters `optimizedp' and `unavailablep'.
* gdbarch.h, gdbarch.c: Regenerate.
* i386-tdep.c (i386_register_to_value): Adjust to new
gdbarch_register_to_value interface.
* i387-tdep.c (i387_register_to_value): Ditto.
* i387-tdep.h (i387_register_to_value): Ditto.
* alpha-tdep.c (alpha_register_to_value): Ditto.
* ia64-tdep.c (ia64_register_to_value): Ditto.
* m68k-tdep.c (m68k_register_to_value): Ditto.
* mips-tdep.c (mips_register_to_value): Ditto.
* rs6000-tdep.c (rs6000_register_to_value): Ditto.
* regcache.h (regcache_raw_read, regcache_raw_read_signed)
(regcache_raw_read_unsigned, regcache_raw_read_signed)
(regcache_raw_read_unsigned, regcache_raw_read_part)
(regcache_cooked_read, regcache_cooked_read_signed)
(regcache_cooked_read_unsigned, regcache_cooked_read_part)
(regcache_cooked_read_ftype): Change return to enum
register_status.
* regcache.c: Include exceptions.h
(regcache_save): Adjust to handle REG_UNAVAILABLE registers.
(do_cooked_read): Change return to enum register_status. Always
forward to regcache_cooked_read.
(regcache_raw_read): Change return to enum register_status. If
the register is not REG_VALID, memset the buffer. Return the
register's status.
(regcache_raw_read_signed): Handle non-REG_VALID registers and
return the register's status.
(regcache_raw_read_unsigned): Ditto.
(regcache_cooked_read): Change return to enum register_status.
Assert that with read-only regcaches, the register's status must
be known. If the regcache is read-only, and the register is not
REG_VALID, memset the buffer. Return the register's status.
(regcache_cooked_read_signed): Change return to enum
register_status. Handle non-REG_VALID registers and return the
register's status.
(regcache_cooked_read_unsigned): Change return to enum
register_status. Handle non-REG_VALID registers and return the
register's status.
(regcache_xfer_part, regcache_raw_read_part)
(regcache_cooked_read_part): Change return to enum
register_status. Return the register's status.
(regcache_read_pc): Throw NOT_AVAILABLE_ERROR if the register is
unavailable.
(regcache_dump): Handle unavailable cooked registers.
* frame.c (do_frame_register_read): Adjust interface to match
regcache_cooked_read_ftype.
* gdbarch.sh (pseudo_register_read): Change return to enum
register_status.
* gdbarch.h, gdbarch.c: Regenerate.
* i386-tdep.h (i386_pseudo_register_read): Change return to enum
register_status.
* i386-tdep.c (i386_pseudo_register_read): Change return to enum
register_status. If reading a raw register indicates the raw
register is not valid, return the raw register's status,
otherwise, return REG_VALID.
* amd64-tdep.c (amd64_pseudo_register_read): Change return to enum
register_status. Handle non-REG_VALID raw registers and return
the register's status.
* arm-tdep.c (arm_neon_quad_read)
(arm_pseudo_read): Change return to enum register_status. Handle
non-REG_VALID raw registers and return the register's status.
* avr-tdep.c (avr_pseudo_register_read): Ditto.
* frv-tdep.c (frv_pseudo_register_read): Ditto.
* h8300-tdep.c (h8300_pseudo_register_read): Ditto.
* hppa-tdep.c (hppa_pseudo_register_read): Ditto.
* m32c-tdep.c (m32c_move_reg_t): Change return to enum
register_status.
(m32c_raw_read, m32c_raw_write, m32c_banked_read)
(m32c_banked_write, m32c_sb_read, m32c_sb_write, m32c_part_read)
(m32c_part_write, m32c_cat_read, m32c_cat_write)
(m32c_r3r2r1r0_read, m32c_r3r2r1r0_write)
(m32c_pseudo_register_read): Change return to enum
register_status. Adjust.
* m68hc11-tdep.c (m68hc11_pseudo_register_read): Change return to
enum register_status. Return the register's status.
* mep-tdep.c (mep_pseudo_cr32_read): Change return to enum
register_status. Return the register's status.
(mep_pseudo_cr64_read, mep_pseudo_register_read): Ditto.
* mips-tdep.c (mips_pseudo_register_read): Ditto.
* mt-tdep.c (mt_pseudo_register_read): Ditto.
* rs6000-tdep.c (move_ev_register_func): New typedef.
(e500_move_ev_register): Use it. Change return to enum
register_status. Return the register's status.
(do_regcache_raw_read): New function.
(do_regcache_raw_write): New function.
(e500_pseudo_register_read): Change return to enum
register_status. Return the register's status. Use
do_regcache_raw_read.
(e500_pseudo_register_write): Adjust. Use do_regcache_raw_write.
(dfp_pseudo_register_read): Change return to enum register_status.
Return the register's status.
(vsx_pseudo_register_read): Ditto.
(efpr_pseudo_register_read): Ditto.
(rs6000_pseudo_register_read): Ditto.
* s390-tdep.c (s390_pseudo_register_read): Change return to enum
register_status. Return the register's status.
* sh64-tdep.c (pseudo_register_read_portions): New function.
(sh64_pseudo_register_read): Change return to enum
register_status. Use pseudo_register_read_portions. Return the
register's status.
* ia64-tdep.c (ia64_pseudo_register_read): Change return to enum
register_status. Return the register's status.
* sh-tdep.c (pseudo_register_read_portions): New function.
(sh_pseudo_register_read): Change return to enum register_status.
Use pseudo_register_read_portions. Return the register's status.
* sparc-tdep.c (sparc32_pseudo_register_read): Change return to
enum register_status. Return the register's status.
* sparc64-tdep.c (sparc64_pseudo_register_read): Ditto.
* spu-tdep.c (spu_pseudo_register_read_spu)
(spu_pseudo_register_read): Ditto.
* xtensa-tdep.c (xtensa_register_read_masked)
(xtensa_pseudo_register_read): Ditto.
* bfin-tdep.c (bfin_pseudo_register_read): Ditto.
Gary Benson
Tom Tromey
Ulrich Weigand
Mark Kettenis
Yao Qi
Markus Metzger
Joel Brobecker
Sergio Durigan Junior
Joel Brobecker
Pedro Alves
Ali Anwar
Jan Kratochvil
Maciej W. Rozycki
Doug Evans
Ulrich Weigand
David S. Miller
Stan Shebs