The sim keeps track of which allocations are zero-ed internally (via
zalloc) and then calls a helper "zfree" function rather than "free".
But this "zfree" function simply calls "free" itself. Since I can
see no point in this and it is simply useless overhead, punt it.
The only real change is in hw-alloc.c where we remove the zalloc_p
tracking, and sim-utils.c where zfree is delete. The rest of the
changes are a simple `sed` from "zfree" to "free".
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The sim-events code jumps through some hoops to avoid using 64bit math
to manage the current time. One fundamental assumption here is that by
constantly scheduling the sim poll event a short time into the future,
the 64bit difference will always fall into a signed 32bit value. This
does work most of the time, except for when processing the sim poll event
itself.
Normally, sim_events_process() will dequeue the sim poll event, update
the current time (time_from_event) according to the next pending event,
process the sim poll event (which will then requeue the sim poll event),
and then continue on.
The problem here of course is that the current time is updated in that
small window before the sim poll event gets a chance to reschedule itself.
So if the 64bit difference between the current time and the next event
does not fit into the signed 32bit value, time_from_event overflows, and
the internal assert at the end of update_time_from_event() triggers.
Since attempts at tweaking sim_events_process() logic introduced other
subtle bugs (due to tangled assumptions between most pieces of the sim
time keeping code), change the time_from_event to a real 64bit value.
Tests on my system between a 32bit ELF and a 64bit ELF show no practical
difference (it's all lost in the system noise). Basically, I booted a
Linux kernel to userspace and then paniced it; this gave me a constant
sample size of about 18 million insns.
This was noticed when simulating Blackfin Das U-Boot. The simulated core
timer is given the max unsigned timeout value possible on a 32bit processor
(0xffffffff). This timeout value is used directly to schedule a hw event
in the sim future (the IRQ firing). Once the sim poll event is kicked off,
the next pending event is the core timer event which is more than 2^31
ticks in the future, and the sim aborts with:
sim-events.c:435: assertion failed - current_time == sim_events_time (sd)
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
I can't find any history for why the call to hw_tree_delete is commented
out, and the VCS history shows that this goes back to the original import
in 2009. I did find some vague reference to it from 2000 (pretty close
to the original import of code), but no actual details.
Without this call, every new instance of the sim results in all old
previously allocated resources being leaked. With some devices, this
isn't just memory, it's things like open file descriptors or mmaps.
So if there are pending issues with this, I'd rather we get the sims
sorted out rather than continuing to leak this stuff. Especially since
the "let's wait for the sims to fix themselves" hasn't actually happened
in the last 10+ years.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
I find it annoying when using --memory-mapfile that I also need to look
up and manually specify the file size to the following --memory-region
option. So make a length of 0 in the following --memory-region trigger
an auto-sizing of the map to the length of the file being mapped.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
gdb/ChangeLog
* remote-sim.c (gdbsim_store_register): Update API to
sim_store_register to check more error conditions.
include/gdb/ChangeLog
* remote-sim.h (sim_store_register): Update the API
documentation for this function.
sim/erc32/ChangeLog
sim/h8300/ChangeLog
sim/m32c/ChangeLog
sim/mn10300/ChangeLog
sim/ppc/ChangeLog
sim/rx/ChangeLog
sim/v850/ChangeLog
* ???.c (sim_store_register): Update return value to
match new API.
The 2nd arg to SIM_AC_OPTION_HARDWARE is described as "a space separated
list of devices that override the defaults" while the 3rd arg is "a space
separated list of extra target specific devices". But the macro doesn't
seem to treat the 2nd arg this way.
Instead, it will always add the default list of devices, and only add the
extra target specific devices if the 2nd arg is not specified. So rework
the logic slightly to handle the 2nd arg as documented.
This shouldn't affect any targets in the tree as no one passes in a non-
empty value as the 2nd arg.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
These functions either call abort() themselves, or call functions which
are already marked noreturn. Either way, they don't return, so mark them
as such so calling code can assume this. This fixes some uninitialized
warnings due to code paths that end in an abort function.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The sim_load_file func creates a buffer with arbitrary data in it (reads
it via the bfd). It then passes it on to a sim_write_fn which expects a
unsigned char buffer. Since sim_load_file itself doesn't care about the
contents, tweak the type to avoid signed mismatch warnings from gcc:
common/sim-load.c: In function ‘sim_load_file’:
common/sim-load.c:143: warning: pointer targets in passing argument 3 of ‘do_write’ differ in signedness
common/sim-load.c:143: note: expected ‘const unsigned char *’ but argument is of type ‘char *’
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
We have malloc (uninitialized buffer), zalloc (zeroed buffer), and
nzalloc (zeroed array). But we don't have a way to allocate an
uninitialized array. Add a HW_NALLOC to fill this gap.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The HW_NZALLOC macro has all caps args for some reason (unlike the other
alloc helpers), and ends up not using the "ME" argument since its copy
and paste source uses "me". Make all the args lowercase to match the
style of all the other args and make it use the correct "me".
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
There are options for listing the current device/hw tree and memory
regions, but no way to find out at run time all the current mappings.
So add a new --map-info option akin to the --memory-info option which
displays all the current mappings.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
When the sim is configured with profile support disabled, the build fails:
./../common/sim-profile.c: In function 'profile_option_handler':
./../common/sim-profile.c:337:6: warning: implicit declaration of function 'PROFILE_PC_FREQ'
./../common/sim-profile.c:337:6: error: lvalue required as left operand of assignment
./../common/sim-profile.c:351:6: warning: implicit declaration of function 'PROFILE_PC_NR_BUCKETS'
./../common/sim-profile.c:351:6: error: lvalue required as left operand of assignment
./../common/sim-profile.c:381:6: warning: implicit declaration of function 'PROFILE_PC_SHIFT'
./../common/sim-profile.c:381:6: error: lvalue required as left operand of assignment
./../common/sim-profile.c:405:8: warning: implicit declaration of function 'PROFILE_PC_START'
./../common/sim-profile.c:405:8: error: lvalue required as left operand of assignment
./../common/sim-profile.c:406:8: warning: implicit declaration of function 'PROFILE_PC_END'
./../common/sim-profile.c:406:8: error: lvalue required as left operand of assignment
./../common/sim-profile.c: In function 'profile_uninstall':
./../common/sim-profile.c:1299:7: warning: implicit declaration of function 'PROFILE_INSN_COUNT'
./../common/sim-profile.c:1299:37: warning: comparison between pointer and integer
./../common/sim-profile.c:1300:2: warning: passing argument 1 of 'zfree' makes pointer from integer without a cast
../common/sim-utils.h:30:6: note: expected 'void *' but argument is of type 'int'
make[2]: *** [sim-profile.o] Error 1
So add some stubs similar to how some of the other subsystems are
stubbed out so things build correctly.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
When building with device and hw support, the sim-core code generates a
lot of build time warnings such as:
./../common/sim-core.c: In function 'sim_core_map_attach':
./../common/sim-core.c:198:7: warning: passing argument 1 of 'device_error' from incompatible pointer type
../common/sim-core.h:347:6: note: expected 'struct device *' but argument is of type 'struct hw *'
./../common/sim-core.c:235:7: warning: passing argument 1 of 'device_error' from incompatible pointer type
../common/sim-core.h:347:6: note: expected 'struct device *' but argument is of type 'struct hw *'
In reality, these two structures get cast back and forth in the core
code already and so are "compatible". So tweak the three functions
that generate all of these warnings to include the casts automatically.
I know this isn't exactly clean, but the current device/hw ifdef
approach is full of landmines itself and I'm not entirely sure how
to unscrew it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Rather than having to bang out chunks of data one byte at a time over
the socket interface, add a write variant that accepts an arbitrarily
long buffer. This speeds things up considerably when we have many
chars to send out at once.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* rx.h (RX_Operand_Type): Add TwoReg.
(RX_Opcode_ID): Remove ediv and ediv2.
[opcodes]
* rx-decode.opc (SRR): New.
(rx_decode_opcode): Use it for movbi and movbir. Decode NOP2 (mov
r0,r0) and NOP3 (max r0,r0) special cases.
* rx-decode.c: Regenerate.
[sim/rx]
* rx.c (decode_cache_base): New.
(id_names): Remove ediv and edivu.
(optype_names): Add TwoReg.
(maybe_get_mem_page): New.
(rx_get_byte): Call it.
(get_op): Add TwoReg support.
(put_op): Likewise.
(PD, PS, PS2, GD, GS, GS2, DSZ, SSZ, S2SZ, US1, US2, OM): "opcode"
is a pointer now.
(DO_RETURN): New. We use longjmp to return an exception result.
(decode_opcode): Make opcode a pointer to the decode cache. Save
decoded opcode information and re-use. Call DO_RETURN instead of
return throughout. Remove ediv and edivu.
* mem.c (ptdc): New. Adds decode cache.
(rx_mem_ptr): Support it.
(rx_mem_decode_cache): New.
* mem.h (enum mem_ptr_action): add MPA_DECODE_CACHE.
(rx_mem_decode_cache): Declare.
* gdb-if.c (sim_resume): Add decode_opcode's setjmp logic here...
* main.c (main): ...and here. Use a fast loop if neither trace
nor disassemble is given.
* cpu.h (RX_MAKE_STEPPED, RX_MAKE_HIT_BREAK, RX_MAKE_EXITED,
RX_MAKE_STOPPED, RX_EXITED, RX_STOPPED): Adjust so that 0 is not a
valid code for anything.
gdb/
* ser-tcp.c (net_open): Check error return from socket() call by its
equality to -1 not by it being negative.
(net_close): Likewise.
gdb/gdbserver/
* gdbreplay.c (remote_open): Check error return from socket() call by
its equality to -1 not by it being negative.
* remote-utils.c (remote_open): Likewise.
sim/arm/
* communicate.c (MYread_char): Check error return from accept() call
by its equality to -1 not by it being negative.
(MYread_charwait): Likewise.
* main.c (main): Likewise for both socket() and accept() calls.
sim/common/
* dv-sockser.c (dv_sockser_init): Check error return from socket()
call by its equality to -1 not by it being negative.
(connected_p): Likewise for accept() call.
sim/cris/
* dv-rv.c (hw_rv_init_socket): Check error return from socket() call
by its equality to -1 not by it being negative.
(hw_rv_write): Likewise.
(hw_rv_handle_incoming): Likewise.
(hw_rv_poll_once): Likewise.
* rvdummy.c (setupsocket): Likewise.
(main): Likewise for accept() call as returned from setupsocket().
sim/m32c/
* main.c (setup_tcp_console): Check error return from socket() call
by its equality to -1 not by it being negative.
