is_hardware_watchpoint.
(watchpoints_triggered): Ditto.
(bpstat_check_location): Use is_watchpoint and
is_hardware_watchpoint.
(bpstat_check_watchpoint): Use is_watchpoint and
is_hardware_watchpoint.
(bpstat_stop_status): Fix comment.
(user_settable_breakpoint): Use is_watchpoint.
(hw_watchpoint_used_count): Use is_hardware_watchpoint.
(disable_watchpoints_before_interactive_call_start): Use
is_watchpoint.
(enable_watchpoints_after_interactive_call_stop): Use
is_watchpoint.
(clear_command): Use is_watchpoint.
(do_enable_breakpoint): Use is_watchpoint.
The recent change to reload_shared_libraries() broke FDPIC shared libraries as
the solib-frv.c code was implicitly relying on the initial order of calls
(first solib_addr() and then solib_create_inferior_hook()). It was
maintaining internal state via enable_break{1,2}_done to handle this.
While I could tweak these values a bit more, the original code wasn't terribly
bullet proof -- if during the initial debug you attempted to view shared
libraries, the enable2_break() code would whine about the ldso internal debug
addresses being unfetchable (and would actually attempt to read address 0x8 on
the target). So I've dropped this implicit dependency on order (i.e.
enable_break1_done) and updated the ldso poking code (i.e. enable_break2) to
silently return when the internal debug address is still set to 0. It will
remain this way until the ldso gets a chance to initialize at which point the
code will act the same as before.
While I have no way of testing the FRV, the Blackfin FDPIC code is using this
same base in a 100% copy & paste method since we implemented FDPIC the same
way as the FRV guys (I'll address this in the future). This fix was required
in order to handle shared libraries with Blackfin FDPIC properly, and I see no
reason why it wouldn't also work for FRV (since the uClibc ldso FDPIC code is
the same too and that's really what this is poking).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
instead of an error if no PLT entry is found. Return a
potentially useful result.
(m32c_m16c_pointer_to_address): Add code to search for function
address when no .plt entry is found.
* vms-alpha.c (_bfd_vms_slurp_eihd): Fix typo.
(_bfd_vms_get_object_record): Always assume there is a pad byte
for alignment.
* vms-lib.c: Add a few comments.
* config/tc-hppa.c (pa_ip): Do not allow 64-bit add condition
matcher to accept and unconditional 32-bit add instruction.
(pa_build_unwind_subspace): Cope with error conditions not
allowing the start symbol to be set.
* gas/hppa/basic/add2.s: Add test of simple 32-bit instruction.
* gas/hppa/basic/basic.exp (do_add2): Add grep for expected
disassembly.
* NEWS: Document new feature.
* remote.c (PACKET_qGetTIBAddr): New enum element.
(remote_get_tib_address): New function.
(init_remote_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_remote): Add add_packet_config_cmd
for PACKET_qGetTIBAddr.
* target.c (update_current_target): Set default value for
new to_get_tib_address field.
* target.h (target_ops): New field to_get_tib_address.
(target_get_tib_address): New macro.
* windows-nat.c (thread_info): Add thread_local_base field.
(windows_add_thread): Add tlb argument of type 'void *'.
(fake_create_process): Adapt windows_add_thread call.
(get_windows_debug_event): Idem.
(windows_get_tib_address): New function.
(init_windows_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_windows_nat): Replace info_w32_cmdlist
initialization by a call to init_w32_command_list.
(info_w32_command, info_w32_cmdlist): Removed from here...
to windows-tdep.c file.
* windows-tdep.h (info_w32_cmdlist): Declare.
(init_w32_command_list): New external function
declaration.
* windows-tdep.c: Add several headers.
(info_w32_cmdlist): to here, made global.
(thread_information_32): New struct.
(thread_information_64): New struct.
(TIB_NAME): New char array.
(MAX_TIB32, MAX_TIB64, FULL_TIB_SIZE): New constants.
(maint_display_all_tib): New static variable.
(windows_get_tlb_type): New function.
(tlb_value_read, tlb_value_write): New functions.
(tlb_value_funcs): New static struct.
(tlb_make_value): New function.
(display_one_tib): New function.
(display_tib): New function.
(show_maint_show_all_tib):New function.
(info_w32_command): Moved from windows-nat.c.
(init_w32_command_list): New function.
(_initialize_windows_tdep): New function.
New "maint set/show show-all-tib" command
New "$_tlb" internal variable.
gdbserver/ChangeLog entry:
* server.c (handle_query): Handle 'qGetTIBAddr' query.
* target.h (target_ops): New get_tib_address field.
* win32-low.h (win32_thread_info): Add thread_local_base field.
* win32-low.c (child_add_thread): Add tlb argument.
Set thread_local_base field to TLB.
(get_child_debug_event): Adapt to child_add_thread change.
(win32_get_tib_address): New function.
(win32_target_ops): Set get_tib_address field to
win32_get_tib_address.
* linux-low.c (linux_target_ops): Set get_tib_address field to NULL.
doc/ChangeLog entry:
gdb.texinfo ($_tlb): Document new automatic convinience variable.
(info w32 thread-information-block): Document new command.
(qGetTIBAddress): Document new gdbserver query.
(maint set/show show-all-tib): Document new command.
* frame.c: Include tracepoint.h.
(get_current_frame): Allow a trace frame to be an alternate source
of stack frame data.
* tracepoint.c (tfind_1): Don't try to get current stack frame if
it won't succeed.
* arm.cc (Arm_output_section::fix_exidx_coverage): Mark object
for local symbol recounting if we remove a section due to ICF.
* gold.cc (queue_middle_gc_tasks): Create a dummy blocker if
there are no regular objects in input.
* solib.c (free_so_symbols): New function, from ...
(free_so): ... here. Call it.
(solib_read_symbols): Don't warn here if symbols have already been
loaded.
(solib_add): Warn here instead, if a pattern was specified.
(reload_shared_libraries_1): New.
(reload_shared_libraries): Rewrite to not fetch the library list.
* solist.h (struct so_list): Remove from_tty.
* solib.c (solib_bfd_open): Return NULL if we failed to open a BFD.
(solib_map_sections): Take so_list argument. Return 0 if we
failed to open a BFD. Add target sections here.
(symbol_add_stub): Delete.
(solib_read_symbols): Inline symbol_add_stub. Use current flags,
not from_tty copied from the so_list. Don't warn a second time
for a missing library.
(update_solib_list): Don't save from_tty. Use TRY_CATCH. Do not
add to the section table here. Print out a single warning for all
missing libraries.
* bsd-uthread.c (bsd_uthread_solib_loaded): Always pass 0 for
flags.
PR python/11381
* python/py-prettyprint.c (pretty_print_one_value): Test for
Py_None.
(print_string_repr): Test for Py_None. Set flags accordingly.
Return value depending on return type.
(print_children): Take a value indicating whether data was printed
before this function was called. Alter output accordingly.
(apply_val_pretty_printer): Capture return value from
print_string_repr and pass to print_children.
2010-04-14 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-prettyprint.py (NoStringContainerPrinter): New printer.
* gdb.python/py-prettyprint.c: Add justchildren struct, typedefs.
* gdb.python/py-prettyprint.exp: New test for to_string returning None.
* gdb.python/py-mi.exp: New test for to_string returning None.
2010-04-14 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Pretty Printing): Document behaviour when to_string
returns None.
* config/tc-alpha.c: Includes vms/egps.h on EVAX.
(s_alpha_comm): Used new EGPS macros from egps.h
(RGPS__V_NO_SHIFT, EGPS__V_MASK): New local macros.
(s_alpha_section_word): Add comments. Use new EGPS macros.
Adjust for modified bfd_vms_set_section_flags function.
As pointed out by Sandra Loosemore, a bunch of targets define sim_write
themselves instead of using the common/ code. So constify them too.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
