This removes infcall-specific special casing from normal_stop,
simplifying it.
Like the "finish" command's, the FSM is responsible for storing the
function's return value.
gdb/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* infcall.c: Include thread_fsm.h.
(struct call_return_meta_info): New.
(get_call_return_value): New function, factored out from
call_function_by_hand_dummy.
(struct call_thread_fsm): New.
(call_thread_fsm_ops): New global.
(new_call_thread_fsm, call_thread_fsm_should_stop)
(call_thread_fsm_should_notify_stop): New functions.
(run_inferior_call): Add 'sm' parameter. Associate the FSM with
the thread.
(call_function_by_hand_dummy): Create a new call_thread_fsm
instance, associate it with the thread, and wait for the FSM to
finish. If finished successfully, fetch the function's result
value out of the FSM.
* infrun.c (fetch_inferior_event): If the FSM says the stop
shouldn't be notified, don't call normal_stop.
(maybe_remove_breakpoints): New function, factored out from ...
(normal_stop): ... here. Simplify.
* infrun.h (maybe_remove_breakpoints): Declare.
* thread-fsm.c (thread_fsm_should_notify_stop): New function.
(thread-fsm.h) <struct thread_fsm_ops>: New field.
(thread_fsm_should_notify_stop): Declare.
This patch makes the execution control code use largely the same
mechanisms in both sync- and async-capable targets. This means using
continuations and use the event loop to react to target events on sync
targets as well. The trick is to immediately mark infrun's event loop
source after resume instead of calling wait_for_inferior. Then
fetch_inferior_event is adjusted to do a blocking wait on sync
targets.
Tested on x86_64 Fedora 20, native and gdbserver, with and without
"maint set target-async off".
gdb/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* breakpoint.c (bpstat_do_actions_1, until_break_command): Don't
check whether the target can async.
* inf-loop.c (inferior_event_handler): Only call target_async if
the target can async.
* infcall.c: Include top.h and interps.h.
(run_inferior_call): For the interpreter to sync mode while
running the infcall. Call wait_sync_command_done instead of
wait_for_inferior plus normal_stop.
* infcmd.c (prepare_execution_command): Don't check whether the
target can async when running in the foreground.
(step_1): Delete synchronous case handling.
(step_once): Always install a continuation, even in sync mode.
(until_next_command, finish_forward): Don't check whether the
target can async.
(attach_command_post_wait, notice_new_inferior): Always install a
continuation, even in sync mode.
* infrun.c (mark_infrun_async_event_handler): New function.
(proceed): In sync mode, mark infrun's event source instead of
waiting for events here.
(fetch_inferior_event): If the target can't async, do a blocking
wait.
(prepare_to_wait): In sync mode, mark infrun's event source.
(infrun_async_inferior_event_handler): No longer bail out if the
target can't async.
* infrun.h (mark_infrun_async_event_handler): New declaration.
* linux-nat.c (linux_nat_wait_1): Remove calls to
set_sigint_trap/clear_sigint_trap.
(linux_nat_terminal_inferior): No longer check whether the target
can async.
* mi/mi-interp.c (mi_on_sync_execution_done): Update and simplify
comment.
(mi_execute_command_input_handler): No longer check whether the
target is async. Update and simplify comment.
* target.c (default_target_wait): New function.
* target.h (struct target_ops) <to_wait>: Now defaults to
default_target_wait.
(default_target_wait): Declare.
* top.c (wait_sync_command_done): New function, factored out from
...
(maybe_wait_sync_command_done): ... this.
* top.h (wait_sync_command_done): Declare.
* target-delegates.c: Regenerate.
Refs:
https://sourceware.org/ml/gdb/2015-03/msg00024.htmlhttps://sourceware.org/ml/gdb/2015-06/msg00005.html
On GNU/Linux, if an infcall spawns a thread, that thread ends up with
stuck running state. This happens because:
- when linux-nat.c detects a new thread, it marks them as running,
and does not report anything to the core.
- we skip finish_thread_state when the thread that is running the
infcall stops.
As result, that new thread ends up with stuck "running" state, even
though it really is stopped.
On Windows, _all_ threads end up stuck in running state, not just the
one that was spawned. That happens because when a new thread is
detected, unlike linux-nat.c, windows-nat.c reports
TARGET_WAITKIND_SPURIOUS to infrun. It's the fact that that event
does not cause a user-visible stop that triggers the problem. When
the target is re-resumed, we call set_running with a wildcard ptid,
which marks all thread as running. That set_running is not suppressed
because the (leader) thread being resumed does not have in_infcall
set. Later, when the infcall finally finishes successfully, nothing
marks all threads back to stopped.
We can trigger the same problem on all targets by having a thread
other than the one that is running the infcall report a breakpoint hit
to infrun, and then have that breakpoint not cause a stop. That's
what the included test does.
The fix is to stop GDB from suppressing the set_running calls while
doing an infcall, and then set the threads back to stopped when the
call finishes, iff they were originally stopped before the infcall
started. (Note the MI *running/*stopped event suppression isn't
affected.)
Tested on x86_64 GNU/Linux.
gdb/ChangeLog:
2015-06-29 Pedro Alves <palves@redhat.com>
PR threads/18127
* infcall.c (run_inferior_call): On infcall success, if the thread
was marked stopped before, reset it back to stopped.
* infrun.c (resume): Don't suppress the set_running calls when
doing an infcall.
(normal_stop): Only discard the finish_thread_state cleanup if the
infcall succeeded.
gdb/testsuite/ChangeLog:
2015-06-29 Pedro Alves <palves@redhat.com>
PR threads/18127
* gdb.threads/hand-call-new-thread.c: New file.
* gdb.threads/hand-call-new-thread.c: New file.
(gdb) PASS: gdb.compile/compile.exp: set unwindonsignal on
compile code *(volatile int *) 0 = 0;
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff7fba426 in _gdb_expr (__regs=0x7ffff7fb8000) at gdb command line:1
1 gdb command line: No such file or directory.
=================================================================
==10462==ERROR: AddressSanitizer: heap-use-after-free on address 0x621000cf7a3d at pc 0x0000004e46b9 bp 0x7ffdeb0f7a40 sp 0x7ffdeb0f71b8
READ of size 10 at 0x621000cf7a3d thread T0
#0 0x4e46b8 in printf_common(void*, char const*, __va_list_tag*) [clone .isra.6] (/home/jkratoch/redhat/gdb-clean-asan/gdb/gdb+0x4e46
b8)
#1 0x4f645e in vasprintf (/home/jkratoch/redhat/gdb-clean-asan/gdb/gdb+0x4f645e)
#2 0xe5cf00 in xstrvprintf common/common-utils.c:120
#3 0xe74192 in throw_it common/common-exceptions.c:332
#4 0xe742f6 in throw_verror common/common-exceptions.c:361
#5 0xddc89e in verror /home/jkratoch/redhat/gdb-clean-asan/gdb/utils.c:541
#6 0xe734bd in error common/errors.c:43
#7 0xafa1d6 in call_function_by_hand_dummy /home/jkratoch/redhat/gdb-clean-asan/gdb/infcall.c:1031
#8 0xe81858 in compile_object_run compile/compile-object-run.c:119
#9 0xe7733c in eval_compile_command compile/compile.c:577
#10 0xe7541e in compile_code_command compile/compile.c:153
It is obvious why that happens, dummy_frame_pop() will call compile objfile
cleanup which will free that objfile and NAME then becomes a stale pointer.
> Is there any reason we release OBJFILE in the dummy frame dtor? Why
> don't we register a cleanup to release in OBJFILE in compile_object_run?
> together with releasing compile_module? 'struct compile_module' has a
> field objfile, which should be released together with
> 'struct compile_module' instead of dummy_frame.
(gdb) break puts
Breakpoint 2 at 0x3830c6fd30: file ioputs.c, line 34.
(gdb) compile code puts("hello")
Breakpoint 2, _IO_puts (str=0x7ffff7ff8000 "hello") at ioputs.c:34
34 {
The program being debugged stopped while in a function called from GDB.
Evaluation of the expression containing the function
(_gdb_expr) will be abandoned.
When the function is done executing, GDB will silently stop.
(gdb) bt
(gdb) _
Now compile_object_run() called from line
(gdb) compile code puts("hello")
has finished for a long time. But we still need to have that injected code
OBJFILE valid when GDB is executing it. Therefore OBJFILE is freed only from
destructor of the frame #1.
At the patched line of call_function_by_hand_dummy() the dummy frame
destructor has not yet been run but it will be run before the fetched NAME
will get used.
gdb/ChangeLog
2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix ASAN crash for gdb.compile/compile.exp.
* infcall.c (call_function_by_hand_dummy): Use xstrdup for NAME.
Now stop_registers are no longer used and it can be removed.
I am not much sure what 'proceed_to_finish' really means now so I make a wild
guess while updating comments about it.
gdb/ChangeLog
2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdbthread.h (struct thread_control_state): Update comment for
proceed_to_finish.
* infcall.c (run_inferior_call): Update comment about
proceed_to_finish.
* infcmd.c (get_return_value): Update comment about stop_registers.
(finish_forward): Update comment about proceed_to_finish.
* infrun.c (stop_registers): Remove.
(clear_proceed_status, normal_stop): Remove stop_registers handling.
* infrun.h (stop_registers): Remove.
With dummy_frame destructors GDB no longer has to use global stop_registers.
dummy_frame's registers can be now stored associated with their specific
dummy_frame.
gdb/ChangeLog
2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
* infcall.c (struct dummy_frame_context_saver)
(dummy_frame_context_saver_data_free, dummy_frame_context_saver_dtor)
(dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
(dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
New.
(call_function_by_hand_dummy): Move discard_cleanups of
inf_status_cleanup before dummy_frame_push. Call
dummy_frame_context_saver_setup and prepare context_saver_cleanup.
Use dummy_frame_context_saver_get_regs instead of stop_registers.
* infcall.h (struct dummy_frame_context_saver)
(dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
(dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
New declarations.
* infcmd.c: Include infcall.h.
(get_return_value): Add parameter ctx_saver, use it instead of
stop_registers.
(print_return_value): Add parameter ctx_saver, pass it.
(struct finish_command_continuation_args): Add field ctx_saver.
(finish_command_continuation): Update print_return_value caller.
(finish_command_continuation_free_arg): Free also ctx_saver.
(finish_forward): Call dummy_frame_context_saver_setup.
* inferior.h (struct dummy_frame_context_saver): New declaration.
(get_return_value): Add parameter ctx_saver.
* python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Update
get_return_value caller.
Both dummy_frame_dtor_ftype and call_function_by_hand_dummy_dtor_ftype
represent the same type, there was some mistake/duplication during check-in.
gdb/ChangeLog
2015-05-08 Jan Kratochvil <jan.kratochvil@redhat.com>
* dummy-frame.c (struct dummy_frame): Use proper typedef for dtor.
* dummy-frame.h (dummy_frame_dtor_ftype): Add its comment.
* infcall.c (call_function_by_hand_dummy): Use proper typedef for
dummy_dtor parameter.
* infcall.h: Include dummy-frame.h.
(call_function_by_hand_dummy_dtor_ftype): Remove.
(call_function_by_hand_dummy): Use proper typedef for dummy_dtor
parameter.
The "step" parameters of 'proceed' and 'resume' aren't really useful
as indication of whether run control wants to single-step the target,
as that information must already be retrievable from
currently_stepping. In fact, if currently_stepping disagrees with
whether we single-stepped the target, then things break. Thus instead
of having the same information in two places, this patch removes those
parameters.
Setting 'step_start_function' is the only user of proceed's 'step'
argument, other than passing the 'step' argument down to 'resume' and
debug log output. Move that instead to set_step_frame, where we
already set other related fields.
clear_proceed_status keeps its "step" parameter for now because it
needs to know which set of threads should have their state cleared,
and is called before the "stepping_command" flag is set.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
2015-03-24 Pedro Alves <palves@redhat.com>
* breakpoint.c (until_break_command): Adjust call to proceed.
* gdbthread.h (struct thread_control_state) <stepping_command>:
New field.
* infcall.c (run_inferior_call): Adjust call to proceed.
* infcmd.c (run_command_1, proceed_thread_callback, continue_1):
Adjust calls to proceed.
(set_step_frame): Set the current thread's step_start_function
here.
(step_once): Adjust calls to proceed.
(jump_command, signal_command, until_next_command)
(finish_backward, finish_forward, proceed_after_attach_callback)
(attach_command_post_wait): Adjust calls to proceed.
* infrun.c (proceed_after_vfork_done): Adjust call to proceed.
(do_target_resume): New function, factored out from ...
(resume): ... here. Remove 'step' parameter. Instead, check
currently_stepping to determine whether the thread should be
single-stepped.
(proceed): Remove 'step' parameter and don't set the thread's
step_start_function here. Adjust call to 'resume'.
(handle_inferior_event): Adjust calls to 'resume'.
(switch_back_to_stepped_thread): Use do_target_resume instead of
'resume'.
(keep_going): Adjust calls to 'resume'.
* infrun.h (proceed): Remove 'step' parameter.
(resume): Likewise.
* windows-nat.c (do_initial_windows_stuff): Adjust call to
'resume'.
* mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
This provides a variant of call_function_by_hand that allows the dummy
frame destructor to be set. This is used by the compiler code to
manage some resources when calling the gdb-generated inferior
function.
gdb/ChangeLog
2014-12-12 Jan Kratochvil <jan.kratochvil@redhat.com>
* infcall.h (call_function_by_hand_dummy): Declare.
* infcall.c (call_function_by_hand): Use
call_function_by_hand_dummy.
(call_function_by_hand_dummy): Rename from call_function_by_hand.
Add arguments. Register a destructor.
gdb/ChangeLog:
* eval.c: Include gdbthread.h.
(evaluate_subexp): Enable thread stack temporaries before
evaluating a complete expression and clean them up after the
evaluation is complete.
* gdbthread.h: Include common/vec.h.
(value_ptr): New typedef.
(VEC (value_ptr)): New vector type.
(value_vec): New typedef.
(struct thread_info): Add new fields stack_temporaries_enabled
and stack_temporaries.
(enable_thread_stack_temporaries)
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries): Declare.
* gdbtypes.c (class_or_union_p): New function.
* gdbtypes.h (class_or_union_p): Declare.
* infcall.c (call_function_by_hand): Store return values of class
type as temporaries on stack.
* thread.c (enable_thread_stack_temporaries): New function.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary): Likewise.
(value_in_thread_stack_temporaries): Likewise.
* value.c (value_force_lval): New function.
* value.h (value_force_lval): Declare.
gdb/testsuite/ChangeLog:
* gdb.cp/chained-calls.cc: New file.
* gdb.cp/chained-calls.exp: New file.
* gdb.cp/smartp.exp: Remove KFAIL for "p c2->inta".
Currently, GDB can pass a signal to the wrong thread in several
different but related scenarios.
E.g., if thread 1 stops for signal SIGFOO, the user switches to thread
2, and then issues "continue", SIGFOO is actually delivered to thread
2, not thread 1. This obviously messes up programs that use
pthread_kill to send signals to specific threads.
This has been a known issue for a long while. Back in 2008 when I
made stop_signal be per-thread (2020b7ab), I kept the behavior -- see
code in 'proceed' being removed -- wanting to come back to it later.
The time has finally come now.
The patch fixes this -- on resumption, intercepted signals are always
delivered to the thread that had intercepted them.
Another example: if thread 1 stops for a breakpoint, the user switches
to thread 2, and then issues "signal SIGFOO", SIGFOO is actually
delivered to thread 1, not thread 2, because 'proceed' first switches
to thread 1 to step over its breakpoint... If the user deletes the
breakpoint before issuing "signal FOO", then the signal is delivered
to thread 2 (the current thread).
"signal SIGFOO" can be used for two things: inject a signal in the
program while the program/thread had stopped for none, bypassing
"handle nopass"; or changing/suppressing a signal the program had
stopped for. These scenarios are really two faces of the same coin,
and GDB can't really guess what the user is trying to do. GDB might
have intercepted signals in more than one thread even (see the new
signal-command-multiple-signals-pending.exp test). At least in the
inject case, it's obviously clear to me that the user means to deliver
the signal to the currently selected thread, so best is to make the
command's behavior consistent and easy to explain.
Then, if the user is trying to suppress/change a signal the program
had stopped for instead of injecting a new signal, but, the user had
changed threads meanwhile, then she will be surprised that with:
(gdb) continue
Thread 1 stopped for signal SIGFOO.
(gdb) thread 2
(gdb) signal SIGBAR
... GDB actually delivers SIGFOO to thread 1, and SIGBAR to thread 2
(with scheduler-locking off, which is the default, because then
"signal" or any other resumption command resumes all threads).
So the patch makes GDB detect that, and ask for confirmation:
(gdb) thread 1
[Switching to thread 1 (Thread 10979)]
(gdb) signal SIGUSR2
Note:
Thread 3 previously stopped with signal SIGUSR2, User defined signal 2.
Thread 2 previously stopped with signal SIGUSR1, User defined signal 1.
Continuing thread 1 (the current thread) with specified signal will
still deliver the signals noted above to their respective threads.
Continue anyway? (y or n)
All these scenarios are covered by the new tests.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-07-25 Pedro Alves <palves@redhat.com>
* NEWS: Mention signal passing and "signal" command changes.
* gdbthread.h (struct thread_suspend_state) <stop_signal>: Extend
comment.
* breakpoint.c (until_break_command): Adjust clear_proceed_status
call.
* infcall.c (run_inferior_call): Adjust clear_proceed_status call.
* infcmd.c (proceed_thread_callback, continue_1, step_once)
(jump_command): Adjust clear_proceed_status call.
(signal_command): Warn if other thread that are resumed have
signals that will be delivered. Adjust clear_proceed_status call.
(until_next_command, finish_command)
(proceed_after_attach_callback, attach_command_post_wait)
(attach_command): Adjust clear_proceed_status call.
* infrun.c (proceed_after_vfork_done): Likewise.
(proceed_after_attach_callback): Adjust comment.
(clear_proceed_status_thread): Clear stop_signal if not in pass
state.
(clear_proceed_status_callback): Delete.
(clear_proceed_status): New 'step' parameter. Only clear the
proceed status of threads the command being prepared is about to
resume.
(proceed): If passed in an explicit signal, override stop_signal
with it. Don't pass the last stop signal to the thread we're
resuming.
(init_wait_for_inferior): Adjust clear_proceed_status call.
(switch_back_to_stepped_thread): Clear the signal if it should not
be passed.
* infrun.h (clear_proceed_status): New 'step' parameter.
(user_visible_resume_ptid): Add comment.
* linux-nat.c (linux_nat_resume_callback): Don't check whether the
signal is in pass state.
* remote.c (append_pending_thread_resumptions): Likewise.
* mi/mi-main.c (proceed_thread): Adjust clear_proceed_status call.
gdb/doc/
2014-07-25 Pedro Alves <palves@redhat.com>
Eli Zaretskii <eliz@gnu.org>
* gdb.texinfo (Signaling) <signal command>: Explain what happens
with multi-threaded programs.
gdb/testsuite/
2014-07-25 Pedro Alves <palves@redhat.com>
* gdb.threads/signal-command-handle-nopass.c: New file.
* gdb.threads/signal-command-handle-nopass.exp: New file.
* gdb.threads/signal-command-multiple-signals-pending.c: New file.
* gdb.threads/signal-command-multiple-signals-pending.exp: New file.
* gdb.threads/signal-delivered-right-thread.c: New file.
* gdb.threads/signal-delivered-right-thread.exp: New file.
The "call" and "print" commands presently always run synchronously, in
the foreground, but GDB currently forgets to put the inferior's
terminal settings into effect while running them, on async-capable
targets, resulting in:
(gdb) print func ()
hello world
Program received signal SIGTTOU, Stopped (tty output).
0x000000373bceb8d0 in __libc_tcdrain (fd=1) at ../sysdeps/unix/sysv/linux/tcdrain.c:29
29 return INLINE_SYSCALL (ioctl, 3, fd, TCSBRK, 1);
The program being debugged was signaled while in a function called from GDB.
GDB remains in the frame where the signal was received.
To change this behavior use "set unwindonsignal on".
Evaluation of the expression containing the function
(func) will be abandoned.
When the function is done executing, GDB will silently stop.
(gdb)
That's because target_terminal_inferior skips actually doing anything
if running in the background, and, nothing is setting sync_execution
while running infcalls:
void
target_terminal_inferior (void)
{
/* A background resume (``run&'') should leave GDB in control of the
terminal. Use target_can_async_p, not target_is_async_p, since at
this point the target is not async yet. However, if sync_execution
is not set, we know it will become async prior to resume. */
if (target_can_async_p () && !sync_execution)
return;
This would best be all cleaned up by making GDB not even call
target_terminal_inferior and try to pass the terminal to the inferior
if running in the background, but that's a more invasive fix that is
better done post-7.8.
This was originally caught by a patch later in this series that makes
catch_command_errors use exception_print instead of
print_any_exception. Note that print_flush calls serial_drain_output
while print_any_exception doesnt't have that bit. And,
gdb.gdb/python-selftest.exp does:
gdb_test "call catch_command_errors(execute_command, \"python print 5\", 0, RETURN_MASK_ALL)" \
"Python not initialized.* = 0"
which without this fix results in SIGTTOU...
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
* infcall.c (run_inferior_call): Set 'sync_execution' while
running the inferior call.
gdb/testsuite/
2014-07-14 Pedro Alves <palves@redhat.com>
* gdb.base/execution-termios.c: New file.
* gdb.base/execution-termios.exp: New file.
This patch is to add ptid into dummy_frame and extend frame_id to
dummy_frame_id (which has a ptid field). With this change, GDB uses
dummy_frame_id (thread ptid and frame_id) to find the dummy frames.
Currently, dummy frames are looked up by frame_id, which isn't
accurate in non-stop or multi-process mode. The test case
gdb.multi/dummy-frame-restore.exp shows the problem and this patch can
fix it.
Test dummy-frame-restore.exp makes two inferiors stop at
different functions, say, inferior 1 stops at f1 while inferior 2
stops at f2. Set a breakpoint to a function, do the inferior call
in two inferiors, and GDB has two dummy frames of the same frame_id.
When the inferior call is finished, GDB will look up a dummy frame
from its stack/list and restore the inferior's regcache. Two
inferiors are finished in different orders, the inferiors' states are
restored differently, which is wrong. Running dummy-frame-restore.exp
under un-patched GDB, we'll get two fails:
FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 2
FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 1
With this patch applied, GDB will choose the correct dummy_frame to
restore for a given inferior, because ptid is considered when looking up
dummy frames. Two fails above are fixed.
Regression tested on x86_64-linux, both native and gdbserver.
gdb:
2014-06-27 Yao Qi <yao@codesourcery.com>
* breakpoint.c (check_longjmp_breakpoint_for_call_dummy):
Change parameter type to 'struct thread_info *'. Caller
updated.
* breakpoint.h (check_longjmp_breakpoint_for_call_dummy):
Update declaration.
* dummy-frame.c (struct dummy_frame_id): New.
(dummy_frame_id_eq): New function.
(struct dummy_frame) <id>: Change its type to 'struct
dummy_frame_id'.
(dummy_frame_push): Add parameter ptid and save it in
dummy_frame_id.
(pop_dummy_frame_bpt): Use ptid of dummy_frame instead of
inferior_ptid.
(pop_dummy_frame): Assert that the ptid of dummy_frame equals
to inferior_ptid.
(lookup_dummy_frame): Change parameter type to 'struct
dummy_frame_id *'. Callers updated. Call dummy_frame_id_eq
instead of frame_id_eq.
(dummy_frame_pop): Add parameter ptid. Callers updated.
Update comments. Compose dummy_frame_id and pass it to
lookup_dummy_frame.
(dummy_frame_discard): Add parameter ptid.
(dummy_frame_sniffer): Compose dummy_frame_id and call
dummy_frame_id_eq instead of frame_id_eq.
(fprint_dummy_frames): Print ptid.
* dummy-frame.h: Remove comments.
(dummy_frame_push): Add ptid in declaration.
(dummy_frame_pop, dummy_frame_discard): Likewise.
gdb/testsuite:
2014-06-27 Yao Qi <yao@codesourcery.com>
* gdb.multi/dummy-frame-restore.exp: New.
* gdb.multi/dummy-frame-restore.c: New.
gdb/doc:
2014-06-27 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Maintenance Commands): Update the output of
'maint print dummy-frames' command.
I managed to miss an interaction between the recent *running patch,
and target-async, which resulted in infcalls being completely broken
on GNU/Linux and remote targets (that is, the async-capable targets).
Temporary breakpoint 1, main () at threads.c:35
35 long i = 0;
(gdb) p malloc (0)
The program being debugged stopped while in a function called from GDB.
Evaluation of the expression containing the function
(malloc) will be abandoned.
When the function is done executing, GDB will silently stop.
(gdb) p malloc (0)
Program received signal SIGSEGV, Segmentation fault.
0x000000000058d7e8 in get_regcache_aspace (regcache=0x0) at ../../src/gdb/regcache.c:281
281 return regcache->aspace;
(top-gdb)
The issue is that when running an infcall, the thread is no longer
marked as running, so run_inferior_call is not calling
wait_for_inferior anymore.
Fix this by doing what the comment actually says we do:
"Do here what `proceed' itself does in sync mode."
And proceed doesn't check whether the target is running.
I notice this is broken in case of the early return in proceed, but we
were broken before in that case anyway, because run_inferior_call will
think the call actually ran. Seems like we should make proceed have a
boolean return, and go through all callers making use of it, if
necessary.
But for now, just fix the regression.
Tested on x86_64 Fedora 20.
gdb/
2014-05-29 Pedro Alves <palves@redhat.com>
* infcall.c (run_inferior_call): Don't check whether the current
thread is running after the proceed call.
Move infrun.c declarations out of inferior.h to a new infrun.h file.
Tested by building on:
i686-w64-mingw32, enable-targets=all
x86_64-linux, enable-targets=all
i586-pc-msdosdjgpp
And also grepped the whole tree for each symbol moved to find where
infrun.h might be necessary.
gdb/
2014-05-22 Pedro Alves <palves@redhat.com>
* inferior.h (debug_infrun, debug_displaced, stop_on_solib_events)
(sync_execution, sched_multi, step_stop_if_no_debug, non_stop)
(disable_randomization, enum exec_direction_kind)
(execution_direction, stop_registers, start_remote)
(clear_proceed_status, proceed, resume, user_visible_resume_ptid)
(wait_for_inferior, normal_stop, get_last_target_status)
(prepare_for_detach, fetch_inferior_event, init_wait_for_inferior)
(insert_step_resume_breakpoint_at_sal)
(follow_inferior_reset_breakpoints, stepping_past_instruction_at)
(set_step_info, print_stop_event, signal_stop_state)
(signal_print_state, signal_pass_state, signal_stop_update)
(signal_print_update, signal_pass_update)
(update_signals_program_target, clear_exit_convenience_vars)
(displaced_step_dump_bytes, update_observer_mode)
(signal_catch_update, gdb_signal_from_command): Move
declarations ...
* infrun.h: ... to this new file.
* amd64-tdep.c: Include infrun.h.
* annotate.c: Include infrun.h.
* arch-utils.c: Include infrun.h.
* arm-linux-tdep.c: Include infrun.h.
* arm-tdep.c: Include infrun.h.
* break-catch-sig.c: Include infrun.h.
* breakpoint.c: Include infrun.h.
* common/agent.c: Include infrun.h instead of inferior.h.
* corelow.c: Include infrun.h.
* event-top.c: Include infrun.h.
* go32-nat.c: Include infrun.h.
* i386-tdep.c: Include infrun.h.
* inf-loop.c: Include infrun.h.
* infcall.c: Include infrun.h.
* infcmd.c: Include infrun.h.
* infrun.c: Include infrun.h.
* linux-fork.c: Include infrun.h.
* linux-nat.c: Include infrun.h.
* linux-thread-db.c: Include infrun.h.
* monitor.c: Include infrun.h.
* nto-tdep.c: Include infrun.h.
* procfs.c: Include infrun.h.
* record-btrace.c: Include infrun.h.
* record-full.c: Include infrun.h.
* remote-m32r-sdi.c: Include infrun.h.
* remote-mips.c: Include infrun.h.
* remote-notif.c: Include infrun.h.
* remote-sim.c: Include infrun.h.
* remote.c: Include infrun.h.
* reverse.c: Include infrun.h.
* rs6000-tdep.c: Include infrun.h.
* s390-linux-tdep.c: Include infrun.h.
* solib-irix.c: Include infrun.h.
* solib-osf.c: Include infrun.h.
* solib-svr4.c: Include infrun.h.
* target.c: Include infrun.h.
* top.c: Include infrun.h.
* windows-nat.c: Include infrun.h.
* mi/mi-interp.c: Include infrun.h.
* mi/mi-main.c: Include infrun.h.
* python/py-threadevent.c: Include infrun.h.
When target-async is enabled, dprintf.exp fails:
Running ../../../src/gdb/testsuite/gdb.base/dprintf.exp ...
FAIL: gdb.base/dprintf.exp: 1st dprintf, call
FAIL: gdb.base/dprintf.exp: 2nd dprintf, call
FAIL: gdb.base/dprintf.exp: Set dprintf function
FAIL: gdb.base/dprintf.exp: 1st dprintf, fprintf
FAIL: gdb.base/dprintf.exp: 2nd dprintf, fprintf
Breakpoint 2, main (argc=1, argv=0x7fffffffd3f8) at ../../../src/gdb/testsuite/gdb.base/dprintf.c:33
33 int loc = 1234;
(gdb) continue
Continuing.
kickoff 1234
also to stderr 1234
At foo entry
(gdb) FAIL: gdb.base/dprintf.exp: 1st dprintf, call
The problem is that GDB gave the prompt back to the user too early.
This happens when calling functions while handling an event that
doesn't cause a user visible stop. dprintf with "set dprintf-style
gdb" is one such case. This patch adds a test case that has a
breakpoint with a condition that calls a function that returns false,
so that regression testing isn't dependent on the implementation of
dprintf.
The problem happens because run_inferior_call causes GDB to forget
that it is running in sync_execution mode, so any event that runs an
inferior call causes fetch_inferior_event to display the prompt, even
if the event should not result in a user visible stop (that is, gdb
resumes the inferior and waits for the next event).
This patch fixes the issue by noticing when GDB was in sync_execution
mode in run_inferior_call, and taking care to restore this state
afterward.
gdb/
2014-03-20 Tom Tromey <tromey@redhat.com>
PR cli/15718
* infcall.c: Include event-top.h.
(run_inferior_call): Call async_disable_stdin if needed.
gdb/testsuite/
2014-03-20 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
PR cli/15718
* gdb.base/condbreak-call-false.c: New file.
* gdb.base/condbreak-call-false.exp: New file.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* infcall.c (call_function_by_hand): Move BP_ADDR comment to
AT_ENTRY_POINT.
(call_function_by_hand) <ON_STACK>: Call write_memory with
gdbarch_breakpoint_from_pc, if possible.
(call_function_by_hand) <AT_ENTRY_POINT>: The BP_ADDR comment is moved
here.
gdb/testsuite/
* gdb.base/valgrind-infcall.c: New file.
* gdb.base/valgrind-infcall.exp: New file.
Remove stale dummy frames.
* breakpoint.c: Include dummy-frame.h.
(longjmp_breakpoint_ops): New variable.
(update_breakpoints_after_exec, breakpoint_init_inferior): Delete also
bp_longjmp_call_dummy.
(bpstat_what, bptype_string, print_one_breakpoint_location)
(init_bp_location): Support bp_longjmp_call_dummy.
(set_longjmp_breakpoint): Use longjmp_breakpoint_ops. Comment why.
(set_longjmp_breakpoint_for_call_dummy)
(check_longjmp_breakpoint_for_call_dummy, longjmp_bkpt_dtor): New
functions.
(initialize_breakpoint_ops): Initialize longjmp_breakpoint_ops.
* breakpoint.h (enum bptype): New item bp_longjmp_call_dummy. Delete
FIXME comment and extend the other comment for bp_call_dummy.
(set_longjmp_breakpoint_for_call_dummy)
(check_longjmp_breakpoint_for_call_dummy): New declarations.
* dummy-frame.c: Include gdbthread.h.
(pop_dummy_frame_bpt): New function.
(pop_dummy_frame): Call pop_dummy_frame_bpt.
(dummy_frame_discard): New function.
(cleanup_dummy_frames): Update the comment about longjmps.
* dummy-frame.h (dummy_frame_discard): New declaration.
* gdbthread.h (struct thread_info): Extend initiating_frame comment.
* infcall.c (call_function_by_hand): New variable longjmp_b. Call
set_longjmp_breakpoint_for_call_dummy. Chain its breakpoints with BPT.
* infrun.c (handle_inferior_event) <BPSTAT_WHAT_CLEAR_LONGJMP_RESUME>:
Add case 4 comment. Call check_longjmp_breakpoint_for_call_dummy and
keep_going if IS_LONGJMP and there is no other reason to stop.
gdb/testsuite/
Remove stale dummy frames.
* gdb.base/call-signal-resume.exp (maintenance print dummy-frames)
(maintenance info breakpoints): New tests.
* gdb.base/stale-infcall.c: New file.
* gdb.base/stale-infcall.exp: New file.
* breakpoint.h (bp_location): Add related_address member.
* inferior.h (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
* value.h (using_struct_return): Likewise.
* gdbarch.sh (return_value): Take a pointer to struct value
instead of struct type for the function requested.
* breakpoint.c (set_breakpoint_location_function): Initialize
related_address for bp_gnu_ifunc_resolver breakpoints.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the
requested function's address to gdbarch_return_value.
* eval.c (evaluate_subexp_standard): Pass the requested
function's address to using_struct_return.
* infcall.c (call_function_by_hand): Pass the requested
function's address to using_struct_return and
gdbarch_return_value.
* infcmd.c (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
(print_return_value): Update accordingly.
(finish_command_continuation): Likewise.
* stack.c (return_command): Pass the requested function's
address to using_struct_return and gdbarch_return_value.
* value.c (using_struct_return): Take a pointer to struct value
instead of struct type for the function requested. Pass the
requested function's address to gdbarch_return_value.
* python/py-finishbreakpoint.c (finish_breakpoint_object):
New function_value member, replacing function_type.
(bpfinishpy_dealloc): Update accordingly.
(bpfinishpy_pre_stop_hook): Likewise.
(bpfinishpy_init): Likewise. Record the requested function's
address.
* mips-tdep.c (mips_fval_reg): New enum.
(mips_o32_push_dummy_call): For MIPS16 FP doubles do not swap
words put in GP registers.
(mips_o64_push_dummy_call): Update a comment.
(mips_o32_return_value): Take a pointer to struct value instead
of struct type for the function requested and use it to check if
using the MIPS16 calling convention. Return the designated
general purpose registers for floating-point values returned in
MIPS16 mode.
(mips_o64_return_value): Likewise.
* ppc-tdep.h (ppc_sysv_abi_return_value): Update prototype.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* alpha-tdep.c (alpha_return_value): Take a pointer to struct
value instead of struct type for the function requested.
* amd64-tdep.c (amd64_return_value): Likewise.
* amd64-windows-tdep.c (amd64_windows_return_value): Likewise.
* arm-tdep.c (arm_return_value): Likewise.
* avr-tdep.c (avr_return_value): Likewise.
* bfin-tdep.c (bfin_return_value): Likewise.
* cris-tdep.c (cris_return_value): Likewise.
* frv-tdep.c (frv_return_value): Likewise.
* h8300-tdep.c (h8300_return_value): Likewise.
(h8300h_return_value): Likewise.
* hppa-tdep.c (hppa32_return_value): Likewise.
(hppa64_return_value): Likewise.
* i386-tdep.c (i386_return_value): Likewise.
* ia64-tdep.c (ia64_return_value): Likewise.
* iq2000-tdep.c (iq2000_return_value): Likewise.
* lm32-tdep.c (lm32_return_value): Likewise.
* m32c-tdep.c (m32c_return_value): Likewise.
* m32r-tdep.c (m32r_return_value): Likewise.
* m68hc11-tdep.c (m68hc11_return_value): Likewise.
* m68k-tdep.c (m68k_return_value): Likewise.
(m68k_svr4_return_value): Likewise.
* m88k-tdep.c (m88k_return_value): Likewise.
* mep-tdep.c (mep_return_value): Likewise.
* microblaze-tdep.c (microblaze_return_value): Likewise.
* mn10300-tdep.c (mn10300_return_value): Likewise.
* moxie-tdep.c (moxie_return_value): Likewise.
* mt-tdep.c (mt_return_value): Likewise.
* ppc-linux-tdep.c (ppc_linux_return_value): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Likewise.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* ppcnbsd-tdep.c (ppcnbsd_return_value): Likewise.
* rl78-tdep.c (rl78_return_value): Likewise.
* rs6000-aix-tdep.c (rs6000_return_value): Likewise.
* rx-tdep.c (rx_return_value): Likewise.
* s390-tdep.c (s390_return_value): Likewise.
* score-tdep.c (score_return_value): Likewise.
* sh-tdep.c (sh_return_value_nofpu): Likewise.
(sh_return_value_fpu): Likewise.
* sh64-tdep.c (sh64_return_value): Likewise.
* sparc-tdep.c (sparc32_return_value): Likewise.
* sparc64-tdep.c (sparc64_return_value): Likewise.
* spu-tdep.c (spu_return_value): Likewise.
* tic6x-tdep.c (tic6x_return_value): Likewise.
* v850-tdep.c (v850_return_value): Likewise.
* vax-tdep.c (vax_return_value): Likewise.
* xstormy16-tdep.c (xstormy16_return_value): Likewise.
* xtensa-tdep.c (xtensa_return_value): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
gdb/testsuite/
* gdb.base/return-nodebug.exp: Also test float and double types.
Now that this method is no longer used by any architecture,
we can remove its support.
gdb/ChangeLog:
* infcall.c (call_function_by_hand): Remove AT_SYMBOL handling.
* inferior.h (AT_SYMBOL): Delete.
Revert:
2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
Joel Brobecker <brobecker@adacore.com>
Fix regression for gdb.cp/gdb2495.exp with gcc-4.7.
* arch-utils.c (displaced_step_at_entry_point): Incrase BP_LEN skip to
3 times.
* infcall.c (call_function_by_hand) <AT_SYMBOL>: Move it upwards and
fall through into AT_ENTRY_POINT.
(call_function_by_hand) <AT_ENTRY_POINT>: New variable bp_len. Adjust
DUMMY_ADDR with it.
* ppc-linux-tdep.c (ppc_linux_displaced_step_location): Increase
PPC_INSN_SIZE skip to 3 times.
Fix regression for gdb.cp/gdb2495.exp with gcc-4.7.
* arch-utils.c (displaced_step_at_entry_point): Incrase BP_LEN skip to
3 times.
* infcall.c (call_function_by_hand) <AT_SYMBOL>: Move it upwards and
fall through into AT_ENTRY_POINT.
(call_function_by_hand) <AT_ENTRY_POINT>: New variable bp_len. Adjust
DUMMY_ADDR with it.
* ppc-linux-tdep.c (ppc_linux_displaced_step_location): Increase
PPC_INSN_SIZE skip to 3 times.
Pedro Alves
Simon Marchi
Jan Kratochvil
Joel Brobecker
Nick Bull
Doug Evans
Siva Chandra
Gary Benson
Yao Qi
Tom Tromey
Joel Brobecker
Siddhesh Poyarekar
Maciej W. Rozycki