Commit graph

15 commits

Author SHA1 Message Date
Jeff Law
918fea3e3c * infptrace.c (child_xfer_memory): Only use if CHILD_XFER_MEMORY
is not defined.

	* hppab-nat.c (call_ptrace): Delete redundant function.
	(kill_inferior, attach, detach, child_resume): Likewise.
	(child_xfer_memory): Likewise.

	* hppah-nat.c (call_ptrace): Delete redundant function.
	(kill_inferior, attach, detach, child_resume): Likewise.

	* config/pa/hppabsd.mh (NATDEPFILES): Add infptrace.o.

	* config/pa/hppahpux.mh (NATDEPFILES): Add infptrace.o.

	* config/pa/nm-hppab.h (FETCH_INFERIOR_REGISTERS): Define.

	* config/pa/nm-hppah.h (FETCH_INFERIOR_REGISTERS): Define.
	(CHILD_XFER_MEMORY): Define.
	(PT_*): Define so that generic infptrace.c code can be used.
1994-01-21 16:22:51 +00:00
Jeff Law
5c38fcee3f * hppab-nat.c (_initialize_kernel_u_addr): Delete unwanted functions. 1994-01-18 04:02:06 +00:00
Jim Kingdon
67ac975911 * target.h: Add enum target_waitkind, enum target_signal, and
struct target_waitstatus.  Change status argument to target_wait to
	be struct target_waitstatus * instead of int *.
	* target.h, infrun.c, all targets: Change type of signal arguments
	to resume(), proceed(), and target_resume() from int to enum
	target_signal.
	* All targets (*_wait, *_resume): Change accordingly.
	* infcmd.c (program_info, signal_command), throughout infrun.c,
	* fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
	* convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
	signal code stuff right with the new signals would be non-trivial).
	* inferior.h (stop_signal): Make it enum target_signal not int.
	* target.c, target.h (target_signal_to_string, target_signal_to_name,
	target_signal_from_name): New functions.
	* inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
	store_waitstatus): New functions.
	* procfs.c (procfs_notice_signals): Use them.
	* i960-tdep.c (i960_fault_to_signal): New function, to replace
	print_fault.
	* config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
1994-01-04 21:53:53 +00:00
Jim Kingdon
976bb0be03 * Makefile.in (init.c): Generate using the source, not munch. This
cleans up all kinds of hassles (which nm to use in munch, etc).  The
	new formatting conventions (mostly already followed) are that
	the name of the _initialize_* routines must start in column zero,
	and must not be inside #if.
	* munch: Removed.
	* Makefile.in: Remove references to munch.
	* serial.c, remote.c, infptrace.c, maint.c, convex-tdep.c,
	alpha-tdep.c, hp300ux-nat.c, hppab-nat.c, osfsolib.c, remote-es.c,
	procfs.c, remote-udi.c, ser-go32.c, ultra3-xdep.c, sh-tdep.c,
	i960-tdep.c, hppa-tdep.c, h8500-tdep.c, dpx2-nat.c, delta68-nat.c,
	z8k-tdep.c: Make sure the above conventions are followed.  Make
	sure they are all declared as returning void.  Clean up
	miscellaneous comments and such.
1993-10-22 05:55:58 +00:00
Stu Grossman
de43d7d005 * breakpoint.c (breakpoint_thread_match break_command_1):
Thread-specific breakpoint support.
* breakpoint.h (struct breakpoint):  Add thread id field.
* fork-child.c (fork_inferior):  Move call to init_thread_list()
back a bit so that init_trace_fun can do thread functions.
* hppa-tdep.c (restore_pc_queue):  Add pid to call to target_wait.
* hppab-nat.c (child_resume):  Handle default pid.
* hppah-nat.c (child_resume):  Handle default pid.
* i386lynx-nat.c (child_wait):  New arg pid.
* inflow.c (kill_command):  Reset thread list.
* infptrace.c (child_resume):  Handle default pid.
* infrun.c:  Thread-specific breakpoint support.
* inftarg.c (child_wait):  Add pid arg.
* osfsolib.c (solib_create_inferior_hook):  Add pid to call to
target_resume.
* procfs.c:  Multi-thread support.
* remote-bug.c (bug_wait):  Add pid arg.
* remote-hms.c (hms_wait):  Add pid arg.
* remote-mips.c (mips_wait):  Add pid arg.
* remote-mon.c (monitor_wait):  Add pid arg.
* remote-nindy.c (nindy_wait):  Add pid arg.
* remote-sim.c (gdbsim_wait):  Add pid arg.
* remote-udi.c (udi_wait):  Add pid arg.
* remote-vx.c (vx_wait):  Add pid arg.
* remote-z8k.c (sim_wait):  Add pid arg.
* remote.c (remote_wait):  Add pid arg.
* solib.c (solib_create_inferior_hook):  Add pid to call to
target_resume.
* target.h (struct target_ops):  Add pid arg to to_wait and
to_notice_signals.
* thread.c (valid_thread_id):  New func to validate thread #s.
* (pid_to_thread_id):  New func to do the obvious.
* thread.h:  Prototypes for above.

* coff-solib.c (coff_solib_add):  Use nameoffset field to locate
filename.
1993-10-16 06:42:02 +00:00
K. Richard Pixley
ade40d3153 bcopy -> memcpy 1993-09-01 20:37:15 +00:00
Jim Kingdon
8a99c71208 * hppab-nat.c: Define ptrace to call_ptrace and pass the 5th arg
there, rather than using an ANSI C specific macro.
1993-08-09 20:07:25 +00:00
Stu Grossman
25286543da Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com)
* Makefile.in (CLIBS):  Reorder to make Lynx ld happy.
	* (HFILES):  New file thread.h.
	* (OBS):  New file thread.c.
	* configure.in:  Host config for Lynx/386.
	* fork-child.c (fork_inferior):  Call init_thread_list().
	* infrun.c (resume):  Add pid to invocation of target_resume().
	* (wait_for_inferior): Pay attention to pid from target_wait().
	Multi-threading code now uses this to determine what to do.
	* inftarg.c (child_wait):  Conditionalize based on CHILD_WAIT macro.
	Use target_pid_to_str() macro throughout when printing pid.
	* inferior.h (child_resume):  Add pid to prototype.
	* hppab-nat.c hppah-nat.c infptrace.c (child_resume):  Pass in pid as
	argument, instead of using inferior_pid.
	* procfs.c (procfs_resume):  Pass in pid as argument.  Ignored for
	now.  Use target_pid_to_str() macro throughout for printing process id.
	* remote-adapt.c (adapt_resume):  Pass in pid as argument.
	* remote-eb.c (eb_resume):  Pass in pid as argument.
	* remote-es.c (es1800_resume):  Pass in pid as argument.
	* remote-hms.c (hms_resume):  Pass in pid as argument.
	* remote-mips.c (mips_resume):  Pass in pid as argument.
	* remote-mm.c (mm_resume):  Pass in pid as argument.
	* remote-monitor.c (monitor_resume):  Pass in pid as argument.
	* remote-nindy.c (nindy_resume):  Pass in pid as argument.
	* remote-sa.sparc.c (remote_resume):  Pass in pid as argument.
	* remote-sim.c (rem_resume):  Pass in pid as argument.
	* remote-sp64sim.c (simif_resume):  Pass in pid as argument.
	* remote-st.c (st2000_resume):  Pass in pid as argument.
	* remote-udi.c (udi_resume):  Pass in pid as argument.
	* remote-vx.c (vx_resume):  Pass in pid as argument.
	* remote-z8k.c (rem_resume):  Pass in pid as argument.
	* remote.c (remote_resume):  Pass in pid as argument.
	* solib.c (solid_create_inferior_hook):  Pass inferior_pid to
	target_resume().
	* target.c (normal_pid_to_str):  New routine to print out process
	ID normally.
	* target.h (struct target_ops):  Add pid to prototype at
	to_resume().  (target_resume):  Add pid argument.
	* (target_pid_to_str):  Default definition for normal type pids.
	* thread.c, thread.c:  New modules for multi thread/process control.
1993-08-02 06:25:36 +00:00
Jim Kingdon
e60f6bb848 * hppa{b,h}-nat.c: Warning, not error, if can't access registers. 1993-07-22 16:49:42 +00:00
Jim Kingdon
72943ad06a * hppa{b,h}-nat.c: Warning, not error, if can't access registers. 1993-07-21 19:57:36 +00:00
Stu Grossman
e835b5e7fa * Patches from Jeffrey Law <law@cs.utah.edu>.
* hppab-nat.c: Eliminate unnecessary ifdefs for
	FETCH_INFERIOR_REGISTERS, CANNOT_FETCH_REGISTER, and
	CANNOT_STORE_REGISTER.
	(fetch_register): Delete code to handle CANNOT_FETCH_REGISTER.
	* hppa-pinsn.c: Support 'I', 'J', and 'K' in output
	templates for 1.1 FP computational instructions.
1993-06-03 23:44:24 +00:00
Stu Grossman
2f1c04d17d * The following patches are from Jeffrey Law <law@cs.utah.edu>.
* config/pa/hppabsd.mh:  Add more files to NATDEPFILES.
	* config/pa/xm-hppa[bh].h: Define FIVE_ARG_PTRACE.
	* hppab-nat.c: Delete WANT_NATIVE_TARGET ifdefs.
	ptrace needs 5 arguments, #define ptrace to always
	pass zero as the 5th argument.
1993-05-01 01:19:43 +00:00
Stu Grossman
66a1aa071e * Merge in HPPA/BSD patches from Utah:
* defs.h:  Add const to 2nd arg of psignal prototype.
	* hppah-tdep.c:  Renamed to hppa-tdep.c 'cuz it's common code with
	BSD now.
	* hppab-core.c:  Deleted.  No longer useful.
	* hppab-nat.c:  #include more files.  Use PT_WUREGS, not
	PT_WRITE_U.
	* hppab-tdep.c:  Deleted.  Supplanted by hppa-tdep.c.
	* config/pa/hppabsd.mh (NATDEPFILES):  Remove hppab-core.o.
	* config/pa/hppabsd.mt (TDEPFILES):  hppab-tdep.o => hppa-tdep.o
	* config/pa/hppahpux.mt (TDEPFILES):  hppab-tdep.o => hppa-tdep.o
	* config/pa/xm-hppab.h:  #define SET_STACK_LIMIT_HUGE.
1993-04-23 23:43:18 +00:00
Stu Grossman
01d1590bab * convex-xdep.c, hppab-nat.c, i860-tdep.c, infptrace.c: Remove
decl for attach_flag, it now lives in inferior.h.
* hppa-pinsn.c:  Reformat opcode tables.  Add function prototypes.
Make most functions static.
* hppah-nat.c:  General cleanups, remove BSD specific code (since
that all lives in hppab-nat.c).
* hppah-tdep.c (frame_chain_valid), tm-hppa.h (FRAME_CHAIN):
Change sense of test against inside_entry_file().  This fix is
from U. of Utah.
* tm-hppa.h (PUSH_DUMMY_FRAME, POP_FRAME):  Use char * for 2nd arg
to read/write_register_bytes().
1992-12-15 01:45:15 +00:00
K. Richard Pixley
ca0487229b hppa native support 1992-10-21 04:57:35 +00:00