* Makefile.in (TESTS): New variable.
(expanded_tests, expanded_tests_or_none): New variables
(check-single): Pass $(expanded_tests_or_none) to runtest.
(check-parallel): Only run tests in $(TESTS) if non-empty.
(check/no-matching-tests-found): New rule.
* README: Document TESTS makefile variable.
If GDB has crashed then gdb_spawn_id still exists (although it does not work).
So my patch does not change anything. And also currently it will leave the
stale gdbserver running anyway.
In general if gdb_spawn_id does not exist then send_gdb + gdb_expect just do
not make sense anyway. So this patch just prevents the error in such case.
The killing of stale gdbserver could be improved multiple ways (also as
suggested by Pedro in the original thread) but that is IMO outside of the
scope of this patch. Apparently if there is no good response from GDB then
gdb_finish() should try to call gdb_start just to kill that gdbserver, IIUC.
gdb/testsuite/
2014-02-16 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix "ERROR: no fileid for" in the testsuite.
* lib/gdb.exp (gdb_finish): Check gdb_spawn_id.
Message-ID: <20140206205814.GA18495@host2.jankratochvil.net>
* gdb.dwarf2/Makefile.in (EXECUTABLES): Add dwp-symlink.
(MISCELLANEOUS): New variable.
(clean): rm -rf $(MISCELLANEOUS).
* gdb.dwarf2/dwp-symlink.exp: Test the case where the executable and
dwp live in the same directory as symlinks, with each symlink pointed
to a differently named file in a different directory.
Consider the following code:
type Color is (Black, Red, Green, Blue, White);
type Primary_Table is array (Color range Red .. Blue) of Boolean;
Prim : Primary_Table := (True, False, False);
GDB prints the length of arrays in a fairly odd way:
(gdb) p prim'length
$2 = blue
The length returned should be an integer, not the array index type,
and this patch fixes this.
gdb/ChangeLog:
* ada-lang.c (ada_evaluate_subexp): Set the type of the value
returned by the 'Length attribute to integer.
testsuite/ChangeLog:
* gdb.ada/tick_length_array_enum_idx: New testcase.
Tests in gdb.gdb fail because directory gdb/testsuite/gdb.gdb doesn't
exist in build tree. This patch appends gdb.gdb/Makefile in AC_OUTPUT,
and adds new Makefile.in in gdb.gdb, so that directory gdb.gdb can be
created during configure.
With this patch applied, tests under gdb.gdb can be run,
$ make check RUNTESTFLAGS='--directory=gdb.gdb'
Using /usr/share/dejagnu/baseboards/unix.exp as board description file for target.
Using /usr/share/dejagnu/config/unix.exp as generic interface file for target.
Using ../../../../git/gdb/testsuite/config/unix.exp as tool-and-target-specific interface file.
Running ../../../../git/gdb/testsuite/gdb.gdb/complaints.exp ...
Running ../../../../git/gdb/testsuite/gdb.gdb/observer.exp ...
Running ../../../../git/gdb/testsuite/gdb.gdb/python-interrupts.exp ...
FAIL: gdb.gdb/python-interrupts.exp: signal SIGINT
Running ../../../../git/gdb/testsuite/gdb.gdb/python-selftest.exp ...
FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print 5", 0, RETURN_MASK_ALL)
Running ../../../../git/gdb/testsuite/gdb.gdb/selftest.exp ...
Running ../../../../git/gdb/testsuite/gdb.gdb/xfullpath.exp ...
=== gdb Summary ===
gdb/testsuite:
2014-02-10 Yao Qi <yao@codesourcery.com>
PR testsuite/16543
* configure.ac: Append gdb.gdb/Makefile in AC_OUTPUT.
* configure: Regenerated.
* Makefile.in: New file.
As design, =breakpoint-modified isn't emitted when breakpoints are modified
by MI commands. This patch is to add tests for this.
gdb/testsuite:
2014-02-08 Yao Qi <yao@codesourcery.com>
* gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify): Test
that no =breakpoint-modified is emitted when breakpoints are
modified through MI commands.
Say:
<stopped at a breakpoint in thread 2>
(gdb) thread 3
(gdb) step
The above triggers the prepare_to_proceed/deferred_step_ptid process,
which switches back to thread 2, to step over its breakpoint before
getting back to thread 3 and "step" it.
If while stepping over the breakpoint in thread 2, a signal arrives,
and it is set to pass/nostop, we'll set a step-resume breakpoint at
the supposed signal-handler resume address, and call keep_going. The
problem is that we were supposedly stepping thread 3, and that
keep_going delivers a signal to thread 2, and due to scheduler-locking
off, resumes everything else, _including_ thread 3, the thread we want
stepping. This means that we lose control of thread 3 until the next
event, when we stop everything. The end result for the user, is that
GDB lost control of the "step".
Here's the current infrun debug output of the above, with the testcase
in the patch below:
infrun: clear_proceed_status_thread (Thread 0x2aaaab8f5700 (LWP 11663))
infrun: clear_proceed_status_thread (Thread 0x2aaaab6f4700 (LWP 11662))
infrun: clear_proceed_status_thread (Thread 0x2aaaab4f2b20 (LWP 11659))
infrun: proceed (addr=0xffffffffffffffff, signal=144, step=1)
infrun: prepare_to_proceed (step=1), switched to [Thread 0x2aaaab6f4700 (LWP 11662)]
infrun: resume (step=1, signal=0), trap_expected=1, current thread [Thread 0x2aaaab6f4700 (LWP 11662)] at 0x40098f
infrun: wait_for_inferior ()
infrun: target_wait (-1, status) =
infrun: 11659 [Thread 0x2aaaab6f4700 (LWP 11662)],
infrun: status->kind = stopped, signal = SIGUSR1
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x40098f
infrun: random signal 30
Program received signal SIGUSR1, User defined signal 1.
infrun: signal arrived while stepping over breakpoint
infrun: inserting step-resume breakpoint at 0x40098f
infrun: resume (step=0, signal=30), trap_expected=0, current thread [Thread 0x2aaaab6f4700 (LWP 11662)] at 0x40098f
^^^ this is a wildcard resume.
infrun: prepare_to_wait
infrun: target_wait (-1, status) =
infrun: 11659 [Thread 0x2aaaab6f4700 (LWP 11662)],
infrun: status->kind = stopped, signal = SIGTRAP
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x40098f
infrun: BPSTAT_WHAT_STEP_RESUME
infrun: resume (step=1, signal=0), trap_expected=1, current thread [Thread 0x2aaaab6f4700 (LWP 11662)] at 0x40098f
^^^ step-resume hit, meaning the handler returned, so we go back to stepping thread 3.
infrun: prepare_to_wait
infrun: target_wait (-1, status) =
infrun: 11659 [Thread 0x2aaaab6f4700 (LWP 11662)],
infrun: status->kind = stopped, signal = SIGTRAP
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x40088b
infrun: switching back to stepped thread
infrun: Switching context from Thread 0x2aaaab6f4700 (LWP 11662) to Thread 0x2aaaab8f5700 (LWP 11663)
infrun: resume (step=1, signal=0), trap_expected=0, current thread [Thread 0x2aaaab8f5700 (LWP 11663)] at 0x400938
infrun: prepare_to_wait
infrun: target_wait (-1, status) =
infrun: 11659 [Thread 0x2aaaab8f5700 (LWP 11663)],
infrun: status->kind = stopped, signal = SIGTRAP
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x40093a
infrun: keep going
infrun: resume (step=1, signal=0), trap_expected=0, current thread [Thread 0x2aaaab8f5700 (LWP 11663)] at 0x40093a
infrun: prepare_to_wait
infrun: target_wait (-1, status) =
infrun: 11659 [Thread 0x2aaaab8f5700 (LWP 11663)],
infrun: status->kind = stopped, signal = SIGTRAP
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x40091e
infrun: stepped to a different line
infrun: stop_stepping
[Switching to Thread 0x2aaaab8f5700 (LWP 11663)]
69 (*myp) ++; /* set breakpoint child_two here */
^^^ we stopped at the wrong line. We still stepped a bit because the
test is running in a loop, and when we got back to stepping thread 3,
it happened to be in the stepping range. (The loop increments a
counter, and the test makes sure it increments exactly once. Without
the fix, the counter increments a bunch, since the user-stepped thread
runs free without GDB noticing.)
The fix is to switch to the stepping thread before continuing for the
step-resume breakpoint.
gdb/
2014-02-07 Pedro Alves <palves@redhat.com>
* infrun.c (handle_signal_stop) <signal arrives while stepping
over a breakpoint>: Switch back to the stepping thread.
gdb/testsuite/
2014-02-07 Pedro Alves <pedro@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdb.threads/step-after-sr-lock.c: New file.
* gdb.threads/step-after-sr-lock.exp: New file.
Currently on software single-step Linux targets we get:
(gdb) PASS: gdb.threads/stepi-random-signal.exp: before stepi: get hexadecimal valueof "$pc"
stepi
infrun: clear_proceed_status_thread (Thread 0x7ffff7fca700 (LWP 7073))
infrun: clear_proceed_status_thread (Thread 0x7ffff7fcb740 (LWP 7069))
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT, step=1)
infrun: resume (step=1, signal=GDB_SIGNAL_0), trap_expected=0, current thread [Thread 0x7ffff7fcb740 (LWP 7069)] at 0x400700
infrun: wait_for_inferior ()
infrun: target_wait (-1, status) =
infrun: 7069 [Thread 0x7ffff7fcb740 (LWP 7069)],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x400704
infrun: software single step trap for Thread 0x7ffff7fcb740 (LWP 7069)
infrun: stepi/nexti
infrun: stop_stepping
44 while (counter != 0)
(gdb) FAIL: gdb.threads/stepi-random-signal.exp: stepi (no random signal)
Vs hardware-step targets:
(gdb) PASS: gdb.threads/stepi-random-signal.exp: before stepi: get hexadecimal valueof "$pc"
stepi
infrun: clear_proceed_status_thread (Thread 0x7ffff7fca700 (LWP 9565))
infrun: clear_proceed_status_thread (Thread 0x7ffff7fcb740 (LWP 9561))
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT, step=1)
infrun: resume (step=1, signal=GDB_SIGNAL_0), trap_expected=0, current thread [Thread 0x7ffff7fcb740 (LWP 9561)] at 0x400700
infrun: wait_for_inferior ()
infrun: target_wait (-1, status) =
infrun: 9561 [Thread 0x7ffff7fcb740 (LWP 9561)],
infrun: status->kind = stopped, signal = GDB_SIGNAL_CHLD
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x400700
infrun: random signal (GDB_SIGNAL_CHLD)
infrun: random signal, keep going
infrun: resume (step=1, signal=GDB_SIGNAL_CHLD), trap_expected=0, current thread [Thread 0x7ffff7fcb740 (LWP 9561)] at 0x400700
infrun: prepare_to_wait
infrun: target_wait (-1, status) =
infrun: 9561 [Thread 0x7ffff7fcb740 (LWP 9561)],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x400704
infrun: stepi/nexti
infrun: stop_stepping
44 while (counter != 0)
(gdb) PASS: gdb.threads/stepi-random-signal.exp: stepi
The test turns on infrun debug, does a stepi while a SIGCHLD is
pending, and checks whether the "random signal" paths in infrun.c are
taken.
On the software single-step variant above, those paths were not taken.
This is a test bug.
The Linux backend short-circuits reporting signals that are set to
pass/nostop/noprint. But _only_ if the thread is _not_
single-stepping. So on hardware-step targets, even though the signal
is set to pass/nostop/noprint by default, the thread is indeed told to
single-step, and so the core sees the signal. On the other hand, on
software single-step architectures, the backend never actually gets a
single-step request (steps are emulated by setting a breakpoint at the
next pc, and then the target told to continue, not step). So the
short-circuiting code triggers and the core doesn't see the signal.
The fix is to make the test be sure the target doesn't bypass
reporting the signal to the core.
Tested on x86_64 Fedora 17, both with and without a series that
implements software single-step for x86_64.
gdb/testsuite/
2014-02-07 Pedro Alves <palves@redhat.com>
* gdb.threads/stepi-random-signal.exp: Set SIGCHLD to print.
gdb/testsuite/
2014-02-06 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix i386-sse-stack-align.exp regression since GDB_PARALLEL.
* gdb.arch/i386-sse-stack-align.exp: Use standard_output_file.
* configure.ac (libpython checking): Remove all but python.o from
CONFIG_OBS. Remove all but python.c from CONFIG_SRCS.
* configure: Regenerate.
* Makefile.in (SFILES): Add extension.c.
(HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
(COMMON_OBS): Add extension.o.
* extension.h: New file.
* extension-priv.h: New file.
* extension.c: New file.
* python/python-internal.h: #include "extension.h".
(gdbpy_auto_load_enabled): Declare.
(gdbpy_apply_val_pretty_printer): Declare.
(gdbpy_apply_frame_filter): Declare.
(gdbpy_preserve_values): Declare.
(gdbpy_breakpoint_cond_says_stop): Declare.
(gdbpy_breakpoint_has_cond): Declare.
(void source_python_script_for_objfile): Delete.
* python/python.c: #include "extension-priv.h".
Delete inclusion of "observer.h".
(extension_language_python): Moved here and renamed from
script_language_python in py-auto-load.c.
Redefined to be of type extension_language_defn.
(python_extension_script_ops): New global.
(python_extension_ops): New global.
(struct python_env): New member previous_active.
(restore_python_env): Call restore_active_ext_lang.
(ensure_python_env): Call set_active_ext_lang.
(gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
New arg extlang.
(gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
New arg extlang.
(gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
New arg extlang.
(gdbpy_eval_from_control_command): Renamed from
eval_python_from_control_command, made static. New arg extlang.
(gdbpy_source_script) Renamed from source_python_script, made static.
New arg extlang.
(gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change
result to int. New arg extlang.
(gdbpy_source_objfile_script): Renamed from
source_python_script_for_objfile, made static. New arg extlang.
(gdbpy_start_type_printers): Renamed from start_type_printers, made
static. New args extlang, extlang_printers. Change result type to
"void".
(gdbpy_apply_type_printers): Renamed from apply_type_printers, made
static. New arg extlang. Rename arg printers to extlang_printers
and change type to ext_lang_type_printers *.
(gdbpy_free_type_printers): Renamed from free_type_printers, made
static. Replace argument arg with extlang, extlang_printers.
(!HAVE_PYTHON, eval_python_from_control_command): Delete.
(!HAVE_PYTHON, source_python_script): Delete.
(!HAVE_PYTHON, gdbpy_should_stop): Delete.
(!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
(!HAVE_PYTHON, start_type_printers): Delete.
(!HAVE_PYTHON, apply_type_printers): Delete.
(!HAVE_PYTHON, free_type_printers): Delete.
(_initialize_python): Delete call to observer_attach_before_prompt.
(finalize_python): Set/restore active extension language.
(gdbpy_finish_initialization) Renamed from
finish_python_initialization, made static. New arg extlang.
(gdbpy_initialized): New function.
* python/python.h: #include "extension.h". Delete #include
"value.h", "mi/mi-cmds.h".
(extension_language_python): Declare.
(GDBPY_AUTO_FILE_NAME): Delete.
(enum py_bt_status): Moved to extension.h and renamed to
ext_lang_bt_status.
(enum frame_filter_flags): Moved to extension.h.
(enum py_frame_args): Moved to extension.h and renamed to
ext_lang_frame_args.
(finish_python_initialization): Delete.
(eval_python_from_control_command): Delete.
(source_python_script): Delete.
(apply_val_pretty_printer): Delete.
(apply_frame_filter): Delete.
(preserve_python_values): Delete.
(gdbpy_script_language_defn): Delete.
(gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
(start_type_printers, apply_type_printers, free_type_printers): Delete.
* auto-load.c: #include "extension.h".
(GDB_AUTO_FILE_NAME): Delete.
(auto_load_gdb_scripts_enabled): Make public. New arg extlang.
(script_language_gdb): Delete, moved to extension.c and renamed to
extension_language_gdb.
(source_gdb_script_for_objfile): Delete.
(auto_load_pspace_info): New member unsupported_script_warning_printed.
(loaded_script): Change type of language member to
struct extension_language_defn *.
(init_loaded_scripts_info): Initialize
unsupported_script_warning_printed.
(maybe_add_script): Make static. Change type of language arg to
struct extension_language_defn *.
(clear_section_scripts): Reset unsupported_script_warning_printed.
(auto_load_objfile_script_1): Rewrite to use extension language API.
(auto_load_objfile_script): Make public. Remove support-compiled-in
and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
(source_section_scripts): Rewrite to use extension language API.
(load_auto_scripts_for_objfile): Rewrite to use
auto_load_scripts_for_objfile.
(collect_matching_scripts_data): Change type of language member to
struct extension_language_defn *.
(auto_load_info_scripts): Change type of language arg to
struct extension_language_defn *.
(unsupported_script_warning_print): New function.
(script_not_found_warning_print): Make static.
(_initialize_auto_load): Rewrite construction of scripts-directory
help.
* auto-load.h (struct objfile): Add forward decl.
(struct script_language): Delete.
(struct auto_load_pspace_info): Add forward decl.
(struct extension_language_defn): Add forward decl.
(maybe_add_script): Delete.
(auto_load_objfile_script): Declare.
(script_not_found_warning_print): Delete.
(auto_load_info_scripts): Update prototype.
(auto_load_gdb_scripts_enabled): Declare.
* python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
auto_load_python_scripts_enabled and made public.
(script_language_python): Delete, moved to python.c.
(gdbpy_script_language_defn): Delete.
(info_auto_load_python_scripts): Update to use
extension_language_python.
* breakpoint.c (condition_command): Replace call to
gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
(bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
with call to breakpoint_ext_lang_cond_says_stop.
* python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
from gdbpy_should_stop. Change result type to enum scr_bp_stop.
New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
(gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
New arg slang.
(local_setattro): Print name of extension language with existing
stop condition.
* valprint.c (val_print, value_print): Update to call
apply_ext_lang_val_pretty_printer.
* cp-valprint.c (cp_print_value): Update call to
apply_ext_lang_val_pretty_printer.
* python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_apply_val_pretty_printer): Renamed from
apply_val_pretty_printer. New arg extlang.
(!HAVE_PYTHON, apply_val_pretty_printer): Delete.
* cli/cli-cmds.c (source_script_from_stream): Rewrite to use
extension language API.
* cli/cli-script.c (execute_control_command): Update to call
eval_ext_lang_from_control_command.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
enum ext_lang_bt_status values. Update call to
apply_ext_lang_frame_filter.
(mi_cmd_stack_list_locals): Ditto.
(mi_cmd_stack_list_args): Ditto.
(mi_cmd_stack_list_variables): Ditto.
* mi/mi-main.c: Delete #include "python/python-internal.h".
Add #include "extension.h".
(mi_cmd_list_features): Replace reference to python internal variable
gdb_python_initialized with call to ext_lang_initialized_p.
* stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
Update to use enum ext_lang_frame_args. Update to call
apply_ext_lang_frame_filter.
* python/py-framefilter.c (extract_sym): Update to use enum
ext_lang_bt_status.
(extract_value, py_print_type, py_print_value): Ditto.
(py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
(py_mi_print_variables, py_print_locals, py_print_args): Ditto.
(py_print_frame): Ditto.
(gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
New arg extlang. Update to use enum ext_lang_bt_status.
* top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
finish_python_initialization. Replace with call to
finish_ext_lang_initialization.
* typeprint.c (do_free_global_table): Update to call
free_ext_lang_type_printers.
(create_global_typedef_table): Update to call
start_ext_lang_type_printers.
(find_global_typedef): Update to call apply_ext_lang_type_printers.
* typeprint.h (struct ext_lang_type_printers): Add forward decl.
(type_print_options): Change type of global_printers from "void *"
to "struct ext_lang_type_printers *".
* value.c (preserve_values): Update to call preserve_ext_lang_values.
* python/py-value.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_preserve_values): Renamed from preserve_python_values.
New arg extlang.
(!HAVE_PYTHON, preserve_python_values): Delete.
* utils.c (quit_flag): Delete, moved to extension.c.
(clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
extension.c.
* eval.c: Delete #include "python/python.h".
* main.c: Delete #include "python/python.h".
* defs.h: Update comment.
testsuite/
* gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected
output.
* gdb.gdb/python-interrupts.exp: New file.
This patch creates inferior when GDB opens a ctf trace data, to be
consistent with tfile target. A test case is added to test for
live target, tfile and ctf target.
gdb:
2014-02-05 Yao Qi <yao@codesourcery.com>
* ctf.c: Include "inferior.h" and "gdbthread.h".
(CTF_PID): A new macro.
(ctf_open): Call inferior_appeared and add_thread_silent.
(ctf_close): Call exit_inferior_silent and set inferior_ptid.
(ctf_thread_alive): New function.
(init_ctf_ops): Install ctf_thread_alive to to_thread_alive.
gdb/testsuite:
2014-02-05 Yao Qi <yao@codesourcery.com>
* gdb.trace/report.exp (use_collected_data): Test the output
of "info threads" and "info inferiors".
When a trace file is loaded in Eclipse, it is expected to see thread
and process (=thread-group-started and =thread-created). Create an
inferior and add a thread for this purpose.
This patch just reverts my previous patch.
gdb/testsuite:
2014-02-05 Yao Qi <yao@codesourcery.com>
Revert this patch:
2013-05-24 Yao Qi <yao@codesourcery.com>
* gdb.trace/tfile.exp: Test inferior and thread.
gdb:
2014-02-05 Yao Qi <yao@codesourcery.com>
Revert this patch:
2013-05-24 Yao Qi <yao@codesourcery.com>
* tracepoint.c (TFILE_PID): Remove.
(tfile_open): Don't add thread and inferior.
(tfile_close): Don't set 'inferior_ptid'. Don't call
exit_inferior_silent.
(tfile_thread_alive): Remove.
(init_tfile_ops): Don't set field 'to_thread_alive' of
tfile_ops.
This patch handles another aspect of the ELFv2 ABI, which unfortunately
requires common code changes.
In ELFv2, functions may provide both a global and a local entry point.
The global entry point (where the function symbol points to) is intended
to be used for function-pointer or cross-module (PLT) calls, and requires
r12 to be set up to the entry point address itself. The local entry
point (which is found at a fixed offset after the global entry point,
as defined by bits in the symbol table entries' st_other field), instead
expects r2 to be set up to the current TOC.
Now, when setting a breakpoint on a function by name, you really want
that breakpoint to trigger either way, no matter whether the function
is called via its local or global entry point. Since the global entry
point will always fall through into the local entry point, the way to
achieve that is to simply set the breakpoint at the local entry point.
One way to do that would be to have prologue parsing skip the code
sequence that makes up the global entry point. Unfortunately, this
does not work reliably, since -for optimized code- GDB these days
will not actuall invoke the prologue parsing code but instead just
set the breakpoint at the symbol address and rely on DWARF being
correct at any point throughout the function ...
Unfortunately, I don't really see any way to express the notion of
local entry points with the current set of gdbarch callbacks.
Thus this patch adds a new callback, skip_entrypoint, that is
somewhat analogous to skip_prologue, but is called every time
GDB needs to determine a function start address, even in those
cases where GDB decides to not call skip_prologue.
As a side effect, the skip_entrypoint implementation on ppc64
does not need to perform any instruction parsing; it can simply
rely on the local entry point flags in the symbol table entry.
With this implemented, two test cases would still fail to set
the breakpoint correctly, but that's because they use the construct:
gdb_test "break *hello"
Now, using "*hello" explicitly instructs GDB to set the breakpoint
at the numerical value of "hello" treated as function pointer, so
it will by definition only hit the global entry point.
I think this behaviour is unavoidable, but acceptable -- most people
do not use this construct, and if they do, they get what they
asked for ...
In one of those two test cases, use of this construct is really
not appropriate. I think this was added way back when as a means
to work around prologue skipping problems on some platforms. These
days that shouldn't really be necessary any more ...
For the other (step-bt), we really want to make sure backtracing
works on the very first instruction of the routine. To enable that
test also on powerpc64le-linux, we can modify the code to call the
test function via function pointer (which makes it use the global
entry point in the ELFv2 ABI).
gdb/ChangeLog:
* gdbarch.sh (skip_entrypoint): New callback.
* gdbarch.c, gdbarch.h: Regenerate.
* symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint.
* infrun.c (fill_in_stop_func): Likewise.
* ppc-linux-tdep.c: Include "elf/ppc64.h".
(ppc_elfv2_elf_make_msymbol_special): New function.
(ppc_elfv2_skip_entrypoint): Likewise.
(ppc_linux_init_abi): Install them for ELFv2.
gdb/testsuite/ChangeLog:
* gdb.base/sigbpt.exp: Do not use "*" when setting breakpoint
on a function.
* gdb.base/step-bt.c: Call hello via function pointer to make
sure its first instruction is executed on powerpc64le-linux.
The powerpc64le-linux ABI specifies that when a 128-bit DFP value is
passed in a pair of floating-point registers, the first register holds
the most-significant part of the value. This is as opposed to the
usual rule on little-endian systems, where the first register would
hold the least-significant part.
This affects two places in GDB, the read/write routines for the
128-bit DFP pseudo-registers, and the function call / return
sequence. For the former, current code already distinguishes
between big- and little-endian targets, but gets the latter
wrong. This is presumably because *GCC* also got it wrong,
and GDB matches the old GCC behavior. But GCC is now fixed:
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg02145.html
so GDB needs to be fixed too. (Old code shouldn't really be
an issue since there is no code "out there" so far that uses
dfp128 on little-endian ...)
gdb/ChangeLog:
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
within a register pair holding a DFP 128-bit value on little-endian.
(ppc64_sysv_abi_return_value_base): Likewise.
* rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
(dfp_pseudo_register_write): Likewise.
gdb/testsuite/ChangeLog:
* gdb.arch/powerpc-d128-regs.exp: Enable on powerpc64*-*.
Many VSX test were failing on powerpc64le-linux, since -as opposed to the
AltiVec tests- there never were little-endian versions of the test patterns.
This patch adds such patterns, along the lines of altivec-regs.exp.
In addition, there is an actual code change required: For those VSX
registers that overlap a floating-point register, the FP register
overlaps the most-significant half of the VSX register both on big-
and little-endian systems. However, on little-endian systems, that
half is stored at an offset of 8 bytes (not 0). This works already
for the "real" FP registers, but current code gets it wrong for
the "extended" pseudo FP register GDB generates for the second
half of the VSX register bank.
This patch updates the corresponding pseudo read/write routines
to take the appropriate offset into consideration.
gdb/ChangeLog:
* rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
of the overlapped FP register within the VSX register on little-
endian platforms.
(efpr_pseudo_register_write): Likewise.
gdb/testsuite/ChangeLog:
* gdb.arch/vsx-regs.exp: Check target endianness. Provide variants
of the test patterns for use on little-endian systems.
A couple of AltiVec tests fail spuriously on powerpc64le-linux, because
they compare against an incorrect pattern. Note that those tests already
contain little-endian variants of the patterns, but those seem to have
bit-rotted a bit: when outputting a vector, GDB no longer omits trailing
zero elements (as it used to do in the past).
This patch updates the pattern to the new GDB output behavior.
In addition, the patch updates the endian test to use the new
gdb_test_multiple logic instead of gdb_expect.
gdb/testsuite/ChangeLog:
* gdb.arch/altivec-regs.exp: Use gdb_test_multiple for endian test.
(decimal_vector): Fix for little-endian.
breakpoint is set in a `ta 0x6d´ which is not a sigreturn syscall. In
these cases no rt_frame exists in the stack and thus the read PC is
wrong.
ChangeLog
2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
the sigreturn register save area only if the syscall is
sigreturn.
testsuite/ChangeLog
2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
* gdb.arch/sparc-sysstep.exp: New file.
* gdb.arch/sparc-sysstep.c: Likewise.
* gdb.arch/Makefile.in (EXECUTABLES): Add sparc-sysstep.
type Char_Table is array (Character range Character'First .. Character'Last)
of Natural;
Trying to print the type description of this type currently yields:
(gdb) ptype char_table
type = array ('["00"]' .. '["ff"]') of natural
Although technically correct, it seemed more useful to print the array
range as:
(gdb) ptype char_table
type = array (character) of natural
This patch implements this suggestion.
gdb/ChangeLog:
* ada-typeprint (type_is_full_subrange_of_target_type):
New function.
(print_range): Add parameter bounds_prefered_p. If not set,
try printing range types using the name of their base type.
(print_range_type): Add parameter bounds_prefered_p.
Use it in call to print_range.
(print_array_type, ada_print_type): Update calls to print_range
and print_range_type.
gdb/testsuite/ChangeLog:
* gdb.ada/array_char_idx: New testcase.
This fixes PR python/16487.
The bug here is that the function-name-handling code in py_print_frame
had a small logic error (really a misplaced closing brace). This
error could lead to a Py_DECREF(NULL), which crashes.
This patch fixes the bug in the obvious way.
Built and regtested on x86-64 Fedora 18. New test case included.
2014-01-23 Tom Tromey <tromey@redhat.com>
PR python/16487:
* python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
on a NULL pointer. Move "goto error" to correct place.
2014-01-23 Tom Tromey <tromey@redhat.com>
PR python/16487:
* gdb.python/py-framefilter.exp: Add test using "Error" filter.
* gdb.python/py-framefilter.py (ErrorInName, ErrorFilter): New
classes.
apply_frame_filter calls ensure_python_env before computing the
gdbarch to use. This means that python_gdbarch can be NULL while in
Python code, and if a frame filter depends on this somehow (easy to
do), gdb will crash.
The fix is to compute the gdbarch first.
Built and regtested on x86-64 Fedora 18.
New test case included.
2014-01-23 Tom Tromey <tromey@redhat.com>
PR python/16491:
* python/py-framefilter.c (apply_frame_filter): Call
ensure_python_env after computing gdbarch.
2014-01-23 Tom Tromey <tromey@redhat.com>
PR python/16491:
* gdb.python/py-framefilter.py (Reverse_Function.function): Read a
string from an inferior frame.
* gdb.python/py-framefilter-mi.exp: Update.
* syscalls/s390x-linux.xml: New file.
* syscalls/s390-linux.xml: New file.
* s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
(XML_SYSCALL_FILENAME_S390X): Likewise.
(op_svc): New enum value for SVC opcode.
(s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
(s390_linux_get_syscall_number): New function.
(s390_gdbarch_init): Register '*get_syscall_number' and the
syscall xml file name.
* data-directory/Makefile.in (SYSCALLS_FILES): Add
"s390-linux.xml" and "s390x-linux.xml".
* NEWS: Announce new feature.
gdb/testsuite/ChangeLog:
* gdb.base/catch-syscall.exp: Activate test on s390*-linux.
The trace-specific test case 'entry-values' concludes fairly late in
the process that this platform doesn't support trace. Before that,
there are some platform specifics that don't work on s390x. The fix
addresses two aspects:
(1) Removal of an excess space character in the regex for the
disassembly. This is needed when there is a function alignment
gap, because then the hex address is immediately followed by a
colon, like in the first 'nopr' line below:
(gdb) disassemble foo+50,+10
Dump of assembler code from 0x32 to 0x3c:
0x0000000000000032 <foo+50>: br %r4
0x0000000000000034: nopr %r7
0x0000000000000036: nopr %r7
0x0000000000000038 <bar+0>: stmg %r11,%r15,88(%r15)
End of assembler dump.
(2) Handling for the s390-specific call instruction.
gdb/testsuite/ChangeLog:
* gdb.trace/entry-values.exp: Remove excess space character from
regex patterns. Handle s390 call instruction.
On ppc64-linux a function symbol does not point to code, but to the
function descriptor. Thus the previous change for this test case
broke it:
https://sourceware.org/ml/gdb-patches/2014-01/msg00275.html
This patch reverts to the original method, re-introducing '_start'
symbols. In addition, it adds sufficient alignment before the label,
such that the label never points into an alignment gap.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-dir-file-name.c (FUNC): Insert alignment and
define "*_start" label. Make "name" static.
* gdb.dwarf2/dw2-dir-file-name.exp: Replace references to
${name} by references to ${name}_start.
When upstream gcc is given a command line with the "-g" option after
"-g3", it doesn't generate a ".debug_macro" section. This is because
the last option wins, thus downgrading the debug level again. Without
any macro debug information in the executable, info-macros.exp
obviously produces many failures.
Since the "-g" option is appended by DejaGnu's target_compile whenever
the "debug" option is set, the fix just removes that option.
gdb/testsuite/ChangeLog:
* gdb.base/info-macros.exp: Remove "debug" from the compile
options.
Provide to_resume and to_wait target methods for the btrace record target
to allow reverse stepping and replay support.
Replay is limited in the sense that only stepping and source correlation
are supported. We do not record data and thus can not show variables.
Non-stop mode is not working. Do not allow record-btrace in non-stop mode.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* btrace.h (btrace_thread_flag): New.
(struct btrace_thread_info) <flags>: New.
* record-btrace.c (record_btrace_resume_thread)
(record_btrace_find_thread_to_move, btrace_step_no_history)
(btrace_step_stopped, record_btrace_start_replaying)
(record_btrace_step_thread, record_btrace_decr_pc_after_break)
(record_btrace_find_resume_thread): New.
(record_btrace_resume, record_btrace_wait): Extend.
(record_btrace_can_execute_reverse): New.
(record_btrace_open): Fail in non-stop mode.
(record_btrace_set_replay): Split into this, ...
(record_btrace_stop_replaying): ... this, ...
(record_btrace_clear_histories): ... and this.
(init_record_btrace_ops): Init to_can_execute_reverse.
* NEWS: Announce it.
testsuite/
* gdb.btrace/delta.exp: Check reverse stepi.
* gdb.btrace/tailcall.exp: Update. Add stepping tests.
* gdb.btrace/finish.exp: New.
* gdb.btrace/next.exp: New.
* gdb.btrace/nexti.exp: New.
* gdb.btrace/record_goto.c: Add comments.
* gdb.btrace/step.exp: New.
* gdb.btrace/stepi.exp: New.
* gdb.btrace/multi-thread-step.c: New.
* gdb.btrace/multi-thread-step.exp: New.
* gdb.btrace/rn-dl-bind.c: New.
* gdb.btrace/rn-dl-bind.exp: New.
* gdb.btrace/data.c: New.
* gdb.btrace/data.exp: New.
* gdb.btrace/Makefile.in (EXECUTABLES): Add new.
doc/
* gdb.texinfo: Document limited reverse/replay support
for target record-btrace.
The btrace record target shows the branch trace from the location of the first
branch destination. This is the first BTS records.
After adding incremental updates, we can now add a dummy record for the current
PC when we enable tracing so we show the trace from the location where branch
tracing has been enabled.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c: Include regcache.h.
(btrace_add_pc): New.
(btrace_enable): Call btrace_add_pc.
(btrace_is_empty): New.
* btrace.h (btrace_is_empty): New.
* record-btrace.c (require_btrace, record_btrace_info): Call
btrace_is_empty.
testsuite/
* gdb.btrace/Makefile.in (EXECUTABLES): Add delta.
* gdb.btrace/exception.exp: Update.
* gdb.btrace/instruction_history.exp: Update.
* gdb.btrace/record_goto.exp: Update.
* gdb.btrace/tailcall.exp: Update.
* gdb.btrace/unknown_functions.exp: Update.
* gdb.btrace/delta.exp: New.
Extend the always failing unwinder to provide the PC based on the call
structure detected in the branch trace.
The unwinder supports normal frames and tailcall frames.
Inline frames are not supported.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* record.h (record_btrace_frame_unwind)
(record_btrace_tailcall_frame_unwind): New declarations.
* dwarf2-frame: Include record.h
(dwarf2_frame_cfa): Throw an error for btrace frames.
* record-btrace.c: Include hashtab.h.
(btrace_get_bfun_name): New.
(btrace_call_history): Call btrace_get_bfun_name.
(struct btrace_frame_cache): New.
(bfcache): New.
(bfcache_hash, bfcache_eq, bfcache_new): New.
(btrace_get_frame_function): New.
(record_btrace_frame_unwind_stop_reason): Allow unwinding.
(record_btrace_frame_this_id): Compute own id.
(record_btrace_frame_prev_register): Provide PC, throw_error
for all other registers.
(record_btrace_frame_sniffer): Detect btrace frames.
(record_btrace_tailcall_frame_sniffer): New.
(record_btrace_frame_dealloc_cache): New.
(record_btrace_frame_unwind): Add new functions.
(record_btrace_tailcall_frame_unwind): New.
(_initialize_record_btrace): Allocate cache.
* btrace.c (btrace_clear): Call reinit_frame_cache.
* NEWS: Announce it.
testsuite/
* gdb.btrace/record_goto.exp: Add backtrace test.
* gdb.btrace/tailcall.exp: Add backtrace test.
The "record function-call-history" and "record instruction-history" commands
accept a range "begin, end". End is not included in both cases. Include it.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* record-btrace.c (record_btrace_insn_history_range): Include
end.
(record_btrace_insn_history_from): Adjust range.
(record_btrace_call_history_range): Include
end.
(record_btrace_call_history_from): Adjust range.
* NEWS: Announce changes.
testsuite/
* gdb.btrace/function_call_history.exp: Update tests.
* gdb.btrace/instruction_history.exp: Update tests.
doc/
* gdb.texinfo (Process Record and Replay): Update documentation.
Add a new modifier /c to the "record function-call-history" command to
indent the function name based on its depth in the call stack.
Also reorder the optional fields to have the indentation at the very beginning.
Prefix the insn range (/i modifier) with "inst ".
Prefix the source line (/l modifier) with "at ".
Change the range syntax from "begin-end" to "begin,end" to allow copy&paste to
the "record instruction-history" and "list" commands.
Adjust the respective tests and add new tests for the /c modifier.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* record.h (enum record_print_flag)
<record_print_indent_calls>: New.
* record.c (get_call_history_modifiers): Recognize /c modifier.
(_initialize_record): Document /c modifier.
* record-btrace.c (btrace_call_history): Add btinfo parameter.
Reorder fields. Optionally indent the function name. Update
all users.
* NEWS: Announce changes.
testsuite/
* gdb.btrace/function_call_history.exp: Fix expected field
order for "record function-call-history".
Add new tests for "record function-call-history /c".
* gdb.btrace/exception.cc: New.
* gdb.btrace/exception.exp: New.
* gdb.btrace/tailcall.exp: New.
* gdb.btrace/x86-tailcall.S: New.
* gdb.btrace/x86-tailcall.c: New.
* gdb.btrace/unknown_functions.c: New.
* gdb.btrace/unknown_functions.exp: New.
* gdb.btrace/Makefile.in (EXECUTABLES): Add new.
doc/
* gdb.texinfo (Process Record and Replay): Document new /c
modifier accepted by "record function-call-history".
Add /i modifier to "record function-call-history" example.
The record instruction-history and record-function-call-history commands start
counting instructions at zero. This is somewhat unintuitive when we start
navigating in the recorded instruction history. Start at one, instead.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (ftrace_new_function): Start counting at one.
* record-btrace.c (record_btrace_info): Adjust number of calls
and insns.
* NEWS: Announce it.
testsuite/
* gdb.btrace/instruction_history.exp: Update.
* gdb.btrace/function_call_history.exp: Update.
The branch trace is represented as 3 vectors:
- a block vector
- a instruction vector
- a function vector
Each vector (except for the first) is computed from the one above.
Change this into a graph where a node represents a sequence of instructions
belonging to the same function and where we have three types of edges to connect
the function segments:
- control flow
- same function (instance)
- call stack
This allows us to navigate in the branch trace. We will need this for "record
goto" and reverse execution.
This patch introduces the data structure and computes the control flow edges.
It also introduces iterator structs to simplify iterating over the branch trace
in control-flow order.
It also fixes PR gdb/15240 since now recursive calls are handled correctly.
Fix the test that got the number of expected fib instances and also the
function numbers wrong.
The current instruction had been part of the branch trace. This will look odd
once we start support for reverse execution. Remove it. We still keep it in
the trace itself to allow extending the branch trace more easily in the future.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* btrace.h (struct btrace_func_link): New.
(enum btrace_function_flag): New.
(struct btrace_inst): Rename to ...
(struct btrace_insn): ...this. Update all users.
(struct btrace_func) <ibegin, iend>: Remove.
(struct btrace_func_link): New.
(struct btrace_func): Rename to ...
(struct btrace_function): ...this. Update all users.
(struct btrace_function) <segment, flow, up, insn, insn_offset)
(number, level, flags>: New.
(struct btrace_insn_iterator): Rename to ...
(struct btrace_insn_history): ...this.
Update all users.
(struct btrace_insn_iterator, btrace_call_iterator): New.
(struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
(struct btrace_target_info) <begin, end, level>
<insn_history, call_history>: New.
(btrace_insn_get, btrace_insn_number, btrace_insn_begin)
(btrace_insn_end, btrace_insn_prev, btrace_insn_next)
(btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
(btrace_call_number, btrace_call_begin, btrace_call_end)
(btrace_call_prev, btrace_call_next, btrace_call_cmp)
(btrace_find_function_by_number, btrace_set_insn_history)
(btrace_set_call_history): New.
* btrace.c (btrace_init_insn_iterator)
(btrace_init_func_iterator, compute_itrace): Remove.
(ftrace_print_function_name, ftrace_print_filename)
(ftrace_skip_file): Change
parameter to const.
(ftrace_init_func): Remove.
(ftrace_debug): Use new btrace_function fields.
(ftrace_function_switched): Also consider gaining and
losing symbol information).
(ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
(ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
(ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
New.
(ftrace_new_function): Move. Remove debug print.
(ftrace_update_lines, ftrace_update_insns): New.
(ftrace_update_function): Check for call, ret, and jump.
(compute_ftrace): Renamed to ...
(btrace_compute_ftrace): ...this. Rewritten to compute call
stack.
(btrace_fetch, btrace_clear): Updated.
(btrace_insn_get, btrace_insn_number, btrace_insn_begin)
(btrace_insn_end, btrace_insn_prev, btrace_insn_next)
(btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
(btrace_call_number, btrace_call_begin, btrace_call_end)
(btrace_call_prev, btrace_call_next, btrace_call_cmp)
(btrace_find_function_by_number, btrace_set_insn_history)
(btrace_set_call_history): New.
* record-btrace.c (require_btrace): Use new btrace thread
info fields.
(record_btrace_info, btrace_insn_history)
(record_btrace_insn_history, record_btrace_insn_history_range):
Use new btrace thread info fields and new iterator.
(btrace_func_history_src_line): Rename to ...
(btrace_call_history_src_line): ...this. Use new btrace
thread info fields.
(btrace_func_history): Rename to ...
(btrace_call_history): ...this. Use new btrace thread info
fields and new iterator.
(record_btrace_call_history, record_btrace_call_history_range):
Use new btrace thread info fields and new iterator.
testsuite/
* gdb.btrace/function_call_history.exp: Fix expected function
trace.
* gdb.btrace/instruction_history.exp: Initialize traced.
Remove traced_functions.
For testing multi-line test output, gdb.btrace tests used the following
pattern:
gdb_test "..." "
...\r
..."
Change this to:
gdb_test "..." [join [list \
"..." \
"..."] "\r\n"]
Also extract repeated tests into a test function and shorten or remove
test messages.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
testsuite/
* gdb.btrace/function_call_history.exp: Update
* gdb.btrace/instruction_history.exp: Update.
The error message for starting recording twice changed.
Update the expected text to fix resulting regressions.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/enable.exp: Update expected text.
This test currently fails on ARM:
(gdb) PASS: gdb.dwarf2/dw2-dos-drive.exp: set breakpoint pending off
break 'z:file.c':func
Cannot access memory at address 0x0
The error is GDB trying to read the prologue at the breakpoint's
address, and failing:
38 throw_error() exceptions.c:444 0x0016728c
37 memory_error() corefile.c:204 0x001d1fcc
36 read_memory() corefile.c:223 0x001d201a
35 read_memory_unsigned_integer() corefile.c:312 0x001d2166
34 arm_skip_prologue() arm-tdep.c:1452 0x00054270
static CORE_ADDR
arm_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
{
...
for (skip_pc = pc; skip_pc < limit_pc; skip_pc += 4)
{
inst = read_memory_unsigned_integer (skip_pc, 4, byte_order_for_code);
The test doesn't execute the compiled object's code, so GDB will try
to read memory from the binary's sections. Instructions on ARM are
4-byte wide, and thus ARM's prologue scanner reads in 4-byte chunks.
As the section 'func' is put at is only 1 byte long, and no other
section is allocated contiguously:
...
Sections:
Idx Name Size VMA LMA File off Algn
0 .text 00000001 00000000 00000000 00000034 2**0
CONTENTS, ALLOC, LOAD, READONLY, CODE
...
... the exec target fails the read the 4 bytes.
Fix this by increasing the function's size.
gdb/testsuite/ChangeLog:
2014-01-16 Omair Javaid <Omair.Javaid@linaro.org>
* gdb.dwarf2/dw2-dos-drive.S: Increase text section size to 4
bytes.
PR python/15464
PR python/16113
* valops.c (value_struct_elt_bitpos): New function
* py-type.c (convert_field): Set 'name' attribute of a gdb.Field
object to 'None' if the field name is an empty string ("").
* python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
attribute to look for a field when 'name' is 'None'.
(get_field_type): New function
testsuite/
* gdb.python/py-type.c: Enhance test case.
* gdb.python/py-value-cc.cc: Likewise
* gdb.python/py-type.exp: Add new tests.
* gdb.python/py-value-cc.exp: Likewise
S390, the dw2-dir-file-name test case fails in the first
gdb_continue_to_breakpoint. Indeed, the breakpoint is now placed into
the alignment gap *before* the actual function.
This happens because the test case declares the respective "*_start"
symbol as a "loose" label before the function definition, and the
compiler inserts the alignment between that label and the function
itself.
The "*_start" symbols were only necessary because FUNC made the
function static. The fix makes the functions extern instead, thus
making the "*_start" labels unnecessary.
testsuite/
2014-01-10 Andreas Arnez <arnez@linux.vnet.ibm.com>
Pedro Alves <palves@redhat.com>
* gdb.dwarf2/dw2-dir-file-name.c (FUNC): Remove "*_start" symbol.
Make "name" extern.
* gdb.dwarf2/dw2-dir-file-name.exp (out_cu, out_line): Replace
references to ${name}_start by references to ${name}.
