2011-03-08 Pedro Alves <pedro@codesourcery.com>
* remote.c (remote_check_symbols): Skip if the target has no
execution.
gdb/testsuite/
2011-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.server/ext-run.exp
(load new file without any gdbserver inferior): New test.
* target.c (target_read_live_memory): New function.
(memory_xfer_live_readonly_partial): New.
(memory_xfer_partial): If reading from a traceframe, fallback to
reading unavailable read-only memory from read-only regions of
live target memory.
* tracepoint.c (disconnect_tracing): Adjust.
(set_current_traceframe): New, factored out from
set_traceframe_number.
(set_traceframe_number): Reimplement to only change the traceframe
number on the GDB side.
(do_restore_current_traceframe_cleanup): Adjust.
(make_cleanup_restore_traceframe_number): New.
(cur_traceframe_number): New global.
(tfile_open): Set cur_traceframe_number to no traceframe.
(set_tfile_traceframe): New function.
(tfile_trace_find): If looking up a traceframe using any method
other than by number, make sure the current tfile traceframe
matches gdb's current traceframe. Update the current tfile
traceframe if the lookup succeeded.
(tfile_fetch_registers, tfile_xfer_partial)
(tfile_get_trace_state_variable_value): Make sure the remote
traceframe matches gdb's current traceframe.
* remote.c (remote_traceframe_number): New global.
(remote_open_1): Set it to -1.
(set_remote_traceframe): New function.
(remote_fetch_registers, remote_store_registers)
(remote_xfer_memory, remote_xfer_partial)
(remote_get_trace_state_variable_value): Make sure the remote
traceframe matches gdb's current traceframe.
(remote_trace_find): If looking up a traceframe using any method
other than by number, make sure the current remote traceframe
matches gdb's current traceframe. Update the current remote
traceframe if the lookup succeeded.
* infrun.c (fetch_inferior_event): Adjust.
* tracepoint.h (set_current_traceframe): Declare.
(get_traceframe_number, set_traceframe_number): Add describing
comments.
* remote-fileio.c: Include target.h.
(remote_fileio_write_bytes): Delete.
(remote_fileio_func_open, remote_fileio_func_write)
(remote_fileio_func_rename, remote_fileio_func_unlink): Use
target_read_memory.
(remote_fileio_func_stat): Use target_read_memory and
target_write_memory.
(remote_fileio_func_gettimeofday): Use target_write_memory.
(remote_fileio_func_system): Use target_read_memory.
* remote.c (remote_write_bytes): Make it static.
(remote_read_bytes): Don't handle partial reads here.
* remote.h (remote_read_bytes): Delete declaration.
Revert:
2010-10-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <pedro@codesourcery.com>
* gdbthread.h (currently_stepping): New declaration.
* infrun.c (currently_stepping): Remove the forward declaration.
(currently_stepping): Make it global.
* linux-nat.c (resume_callback) <lp->stopped && lp->status == 0>: New
variables tp and step, initialized them. Pass STEP to to_resume.
Print also possibly "PTRACE_SINGLESTEP" if STEP. Initialize LP->STEP.
* remote.c (currently_stepping_callback): New.
(remote_vcont_resume)
<ptid_equal (ptid, minus_one_ptid) || ptid_is_pid (ptid)>:
New variable tp. Call currently_stepping_callback and step such
thread.
gdb/testsuite/
Revert:
2010-10-17 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.threads/sigstep-threads.exp: New file.
* gdb.threads/sigstep-threads.c: New file.
Thiago Jung Bauermann <bauerman@br.ibm.com>
Support for hw accelerated condition watchpoints in booke powerpc.
* breakpoint.c (fetch_watchpoint_value): Rename to fetch_subexp_value
and move to eval.c. Change callers.
(insert_bp_location): Pass watchpoint condition in
target_insert_watchpoint.
(remove_breakpoint_1) Pass watchpoint condition in
target_remove_watchpoint.
(watchpoint_locations_match): Call
target_can_accel_watchpoint_condition.
* eval.c: Include wrapper.h.
(fetch_subexp_value): Moved from breakpoint.c.
* ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint):
Formatting fix.
(can_use_watchpoint_cond_accel): New function.
(calculate_dvc): Likewise.
(num_memory_accesses): Likewise.
(check_condition): Likewise.
(ppc_linux_can_accel_watchpoint_condition): Likewise
(ppc_linux_insert_watchpoint): Call can_use_watchpoint_cond_accel,
check_condition and calculate_dvc.
(ppc_linux_remove_watchpoint): Likewise.
(_initialize_ppc_linux_nat): Set to_can_accel_watchpoint_condition to
ppc_linux_can_accel_watchpoint_condition
* target.c (debug_to_insert_watchpoint): Add argument for watchpoint
condition.
(debug_to_remove_watchpoint): Likewise.
(debug_to_can_accel_watchpoint_condition): New function.
(update_current_target): Set to_can_accel_watchpoint_condition.
(setup_target_debug): Set to_can_accel_watchpoint_condition.
* target.h: Add opaque declaration for struct expression.
(struct target_ops) <to_insert_watchpoint>,
<to_remove_watchpoint>: Add new arguments to pass the watchpoint
<to_can_accel_watchpoint_condition>: New member.
condition. Update all callers and implementations.
(target_can_accel_watchpoint_condition): New macro.
* value.c (free_value_chain): New function.
* value.h (fetch_subexp_value): New prototype.
(free_value_chain): Likewise.
Add per-operation permission flags.
* target.h (struct target_ops): New method to_set_permissions.
(target_set_permissions): New macro.
(target_insert_breakpoint): Change macro to function.
(target_remove_breakpoint): Ditto.
(target_stop): Ditto.
(may_write_registers): Declare.
(may_write_memory): Declare.
(may_insert_breakpoints): Declare.
(may_insert_tracepoints): Declare.
(may_insert_fast_tracepoints): Declare.
(may_stop): Declare.
* target.c (may_write_registers, may_write_registers_1): New globals.
(may_write_memory, may_write_memory_1): New globals.
(may_insert_breakpoints, may_insert_breakpoints_1): New globals.
(may_insert_tracepoints, may_insert_tracepoints_1): New globals.
(may_insert_fast_tracepoints, may_insert_fast_tracepoints_1): New
globals.
(may_stop, may_stop_1): New global.
(target_xfer_partial): Test for write permission.
(target_store_registers): Ditto.
(target_insert_breakpoint): New function.
(target_remove_breakpoint): New function.
(target_stop): New function.
(_initialize_targets): Add new set/show variables.
(set_write_memory_permission): New function.
(update_target_permissions): New function.
(set_target_permissions): New function.
(update_current_target): Default to_set_permissions.
(_initialize_targets): Use new globals and setter function.
* tracepoint.c (start_tracing): Test for permission.
* inferior.h (update_observer_mode): Declare.
* infrun.c (non_stop_1): Define earlier.
(observer_mode, observer_mode_1): New globals.
(set_observer_mode, show_observer_mode): New functions.
(update_observer_mode): New function.
(_initialize_infrun): Define "set observer" command.
* remote.c (PACKET_QAllow): New optional packet.
(remote_protocol_features): Add QAllow.
(remote_set_permissions): New function.
(remote_start_remote): Call it.
(init_remote_ops): Add it to target vector.
(_initialize_remote): Add config command for QAllow.
* gdb.texinfo (Observer Mode): New section.
(General Query Packets): Document QAllow.
* gdb.base/permissions.exp: New file.
(remote_start_remote): In non-stop mode, update the remote end on
which signals it can silently pass.
(init_remote_ops): Install remote_notice_signals.
* NEWS: Document new feature.
* remote.c (PACKET_qGetTIBAddr): New enum element.
(remote_get_tib_address): New function.
(init_remote_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_remote): Add add_packet_config_cmd
for PACKET_qGetTIBAddr.
* target.c (update_current_target): Set default value for
new to_get_tib_address field.
* target.h (target_ops): New field to_get_tib_address.
(target_get_tib_address): New macro.
* windows-nat.c (thread_info): Add thread_local_base field.
(windows_add_thread): Add tlb argument of type 'void *'.
(fake_create_process): Adapt windows_add_thread call.
(get_windows_debug_event): Idem.
(windows_get_tib_address): New function.
(init_windows_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_windows_nat): Replace info_w32_cmdlist
initialization by a call to init_w32_command_list.
(info_w32_command, info_w32_cmdlist): Removed from here...
to windows-tdep.c file.
* windows-tdep.h (info_w32_cmdlist): Declare.
(init_w32_command_list): New external function
declaration.
* windows-tdep.c: Add several headers.
(info_w32_cmdlist): to here, made global.
(thread_information_32): New struct.
(thread_information_64): New struct.
(TIB_NAME): New char array.
(MAX_TIB32, MAX_TIB64, FULL_TIB_SIZE): New constants.
(maint_display_all_tib): New static variable.
(windows_get_tlb_type): New function.
(tlb_value_read, tlb_value_write): New functions.
(tlb_value_funcs): New static struct.
(tlb_make_value): New function.
(display_one_tib): New function.
(display_tib): New function.
(show_maint_show_all_tib):New function.
(info_w32_command): Moved from windows-nat.c.
(init_w32_command_list): New function.
(_initialize_windows_tdep): New function.
New "maint set/show show-all-tib" command
New "$_tlb" internal variable.
gdbserver/ChangeLog entry:
* server.c (handle_query): Handle 'qGetTIBAddr' query.
* target.h (target_ops): New get_tib_address field.
* win32-low.h (win32_thread_info): Add thread_local_base field.
* win32-low.c (child_add_thread): Add tlb argument.
Set thread_local_base field to TLB.
(get_child_debug_event): Adapt to child_add_thread change.
(win32_get_tib_address): New function.
(win32_target_ops): Set get_tib_address field to
win32_get_tib_address.
* linux-low.c (linux_target_ops): Set get_tib_address field to NULL.
doc/ChangeLog entry:
gdb.texinfo ($_tlb): Document new automatic convinience variable.
(info w32 thread-information-block): Document new command.
(qGetTIBAddress): Document new gdbserver query.
(maint set/show show-all-tib): Document new command.
replies.
(remote_start_remote): Update and merge tracepoints and trace
state variables as long as the target supports tracepoints.
(remote_trace_init): Fix prototype.
(remote_download_trace_state_variable): Validate reply.
(remote_trace_set_readonly_regions): Fix prototype.
(remote_trace_start): Fix prototype. Check for empty reply.
(remote_get_trace_status): Small cleanup.
(remote_trace_stop): Fix prototype. Check for empty reply.
(remote_trace_find): Check for empty reply.
(remote_save_trace_data): Validate reply.
(remote_set_disconnected_tracing): Check for empty reply, and
validate reply.
(remote_set_circular_trace_buffer): Ditto.
Pedro Alves <pedro@codesourcery.com>
* tracepoint.h (struct trace_status): New fields disconnected_tracing
and circular_buffer.
(disconnect_tracing): Rename from disconnect_or_stop_tracing.
* tracepoint.c (trace_status_command): Display target's status for
disconnected tracing and circular buffer.
(disconnect_tracing): Rename from disconnect_or_stop_tracing, add
query for non-disconnected-tracing case, remove the stop_tracing
call.
(tfile_open): Clear disconnected and circular buffer status.
(trace_save): Save disconnected and circular buffer status.
(parse_trace_status): Parse disconnected and circular buffer status,
also recognize disconnected as a stop reason.
* remote.c (remote_set_disconnected_tracing): Only set
QTDisconnected if the remote end supports disconnected tracing.
Warn otherwise, if trying to enable disconnected tracing.
* infcmd.c (detach_command): Update disconnect_tracing call.
* cli/cli-cmds.c (quit_command): Ditto.
* gdb.texinfo (Tracepoint Packets): Describe disconn and circular
trace status fields.
