* rx.h (RX_Operand_Type): Add TwoReg.
(RX_Opcode_ID): Remove ediv and ediv2.
[opcodes]
* rx-decode.opc (SRR): New.
(rx_decode_opcode): Use it for movbi and movbir. Decode NOP2 (mov
r0,r0) and NOP3 (max r0,r0) special cases.
* rx-decode.c: Regenerate.
[sim/rx]
* rx.c (decode_cache_base): New.
(id_names): Remove ediv and edivu.
(optype_names): Add TwoReg.
(maybe_get_mem_page): New.
(rx_get_byte): Call it.
(get_op): Add TwoReg support.
(put_op): Likewise.
(PD, PS, PS2, GD, GS, GS2, DSZ, SSZ, S2SZ, US1, US2, OM): "opcode"
is a pointer now.
(DO_RETURN): New. We use longjmp to return an exception result.
(decode_opcode): Make opcode a pointer to the decode cache. Save
decoded opcode information and re-use. Call DO_RETURN instead of
return throughout. Remove ediv and edivu.
* mem.c (ptdc): New. Adds decode cache.
(rx_mem_ptr): Support it.
(rx_mem_decode_cache): New.
* mem.h (enum mem_ptr_action): add MPA_DECODE_CACHE.
(rx_mem_decode_cache): Declare.
* gdb-if.c (sim_resume): Add decode_opcode's setjmp logic here...
* main.c (main): ...and here. Use a fast loop if neither trace
nor disassemble is given.
* cpu.h (RX_MAKE_STEPPED, RX_MAKE_HIT_BREAK, RX_MAKE_EXITED,
RX_MAKE_STOPPED, RX_EXITED, RX_STOPPED): Adjust so that 0 is not a
valid code for anything.
gdb/
* ser-tcp.c (net_open): Check error return from socket() call by its
equality to -1 not by it being negative.
(net_close): Likewise.
gdb/gdbserver/
* gdbreplay.c (remote_open): Check error return from socket() call by
its equality to -1 not by it being negative.
* remote-utils.c (remote_open): Likewise.
sim/arm/
* communicate.c (MYread_char): Check error return from accept() call
by its equality to -1 not by it being negative.
(MYread_charwait): Likewise.
* main.c (main): Likewise for both socket() and accept() calls.
sim/common/
* dv-sockser.c (dv_sockser_init): Check error return from socket()
call by its equality to -1 not by it being negative.
(connected_p): Likewise for accept() call.
sim/cris/
* dv-rv.c (hw_rv_init_socket): Check error return from socket() call
by its equality to -1 not by it being negative.
(hw_rv_write): Likewise.
(hw_rv_handle_incoming): Likewise.
(hw_rv_poll_once): Likewise.
* rvdummy.c (setupsocket): Likewise.
(main): Likewise for accept() call as returned from setupsocket().
sim/m32c/
* main.c (setup_tcp_console): Check error return from socket() call
by its equality to -1 not by it being negative.
* erc32.c (sis_memory_write): Change prototype to const unsigned char *.
* func.c (exec_cmd, event, advance_time, wait_for_irq): Use uint64
for counts.
* interf.c (run_sim): Change icount to uint64_t. Use strtol directly.
(sim_resume): Specify maximum run time as uint64.
* sis.c (run_sim): Change icount to uint64_t.
* sis.h: Define uint64 as uint64_t. Change various fields and
prototypes to uint64 to support longer simulations.
The testsuite subdir has a note about unifying the target->subdir logic,
so do just that. The end goal here is to have `make check` work out of
the box without having to delve into dejagnu internals.
The target-specific logic is split out of the top level configure.ac file
and into a dedicated configure.tgt similar to other subprojects (gdb and
ld and etc...) with the difference that this file has to be included at
the m4 level instead of the shell level. This is necessary only because
autoconf requires AC_CONFIG_SUBDIRS be given a string literal and not a
variable value.
Then the toplevel and the testsuite configure files pull this in, the sim
subdir gets expanded into testsuite/site.exp, and the default sim run code
uses this info to set the sim path to the local compiled run file if it
hasn't already been specified.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The current fpu code with externals enabled results in the warnings:
common/sim-fpu.c:2437: warning: missing initializer
common/sim-fpu.c:2437: warning: (near initialization for 'sim_fpu_zero.sign')
common/sim-fpu.c:2440: warning: missing initializer
common/sim-fpu.c:2440: warning: (near initialization for 'sim_fpu_qnan.sign')
So tweak the old style initializers to avoid these.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The common/ code uses sim_cpu rather than SIM_CPU to avoid inter-header
dependency issues, so follow convention to fix building some targets.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The profile code already has options and handling for accepting a file to
write the profile output like the trace code, but it doesn't actually use
it. At the moment, it simply opens the file at the start and closes it at
the end. So add two new local functions the way the trace code is doing
it and have them figure out whether to write the output to stdout or the
specified file. Then convert all existing output in the profile code to
use these helpers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
There is an architecture-info flag for listing possible arch values, but
there is on equivalent for listing possible model values. So add the
equivalent for models.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
As pointed out by Sandra Loosemore, a bunch of targets define sim_write
themselves instead of using the common/ code. So constify them too.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
A few ports rely on internal dv-sockser state in order to detect whether
a connection has been made (look for 'extern sockser_addr'). Rather than
continuing that tradition, extend the existing status function to return
the socket connection status.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Most the sim write functions declare their source buffer const because
they only ever read from it. The global sim_write() function does not
follow this convention though which causes some warnings when trying to
pass it const strings or buffers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
I found the documentation lacking in many places, so I tried filling in a
lot of holes that I personally fell into.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The profile code has a lot of helper macros already, but none yet for the
branch profiling code. So add ones for the basic functions -- taken and
untaken branches.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The sim code has a lot of static initializer for options and devices, but
since they aren't using newer struct style, they have to specify a value
for every option otherwise gcc spits a lot of warnings about "missing
initializer". So add NULL/0 stubs for pointers/values.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The dup_arg_p function is only given const strings, and it maintains a
local table of those const strings. So constify the whole thing to fix
the GCC warnings:
common/sim-options.c: In function 'sim_parse_args':
common/sim-options.c:559: warning: passing argument 1 of 'dup_arg_p'
discards qualifiers from pointer target type
common/sim-options.c: In function 'print_help':
common/sim-options.c:675: warning: passing argument 1 of 'dup_arg_p'
discards qualifiers from pointer target type
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
I've committed the following patch as obvious. The local "prefix"
variable is only assigned const strings, and only passed to printf()
functions, so add "const" to avoid gcc warnings:
common/sim-fpu.c: In function 'sim_fpu_print_status':
common/sim-fpu.c:2508: warning: initialization discards qualifiers
from pointer target type
common/sim-fpu.c:2566: warning: assignment discards qualifiers
from pointer target type
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The local save_data() function takes a pointer to a buffer and only uses it as
the source to the memcpy() function. Since it is given const strings, GCC
likes to spit out warnings:
common/sim-trace.c: In function 'trace_prefix':
common/sim-trace.c:697: warning: passing argument 5 of 'save_data' discards
qualifiers from pointer target type
So I've committed this as obvious.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The sim-options code assigns a const string to "char *" in decoding the
current environment settings, and only uses it to pass to a printf. GCC
outputs the warnings:
common/sim-options.c: In function 'standard_option_handler':
common/sim-options.c:271: warning: assignment discards qualifiers from pointer
target type
common/sim-options.c:272: warning: assignment discards qualifiers from pointer
target type
common/sim-options.c:273: warning: assignment discards qualifiers from pointer
target type
So I've committed this as "obvious".
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The accept() function takes a socklen_t, not an int. Using an int causes:
dv-sockser.c: In function 'connected_p':
dv-sockser.c:273: warning: pointer targets in passing argument 3
of 'accept' differ in signedness
So use the same socklen_t detection code as gdb and convert the accept().
This is the normal "passing a buffer straight to printf makes GCC warn".
While we know this particular case is fine, the trend in this source tree
is to fix this anyways to avoid the warnings.
GCC issues warnings because const strings like "foo" are passed as char*.
sim-watch.c: In function 'watchpoint_type_to_str':
sim-watch.c:120: warning: return discards qualifiers from pointer target type
