This change:
commit b775012e84
Author: Luis Machado <luisgpm@br.ibm.com>
Date: Fri Feb 24 15:10:59 2012 +0000
2012-02-24 Luis Machado <lgustavo@codesourcery.com>
* remote.c (remote_supports_cond_breakpoints): New forward
declaration.
[...]
changed the way breakpoints are inserted and removed such that
`insert_bp_location' can now be called with the breakpoint being handled
already in place, while previously the call was only ever made for
breakpoints that have not been put in place. This in turn caused an
issue for software breakpoints and targets for which a breakpoint's
`placed_address' may not be the same as the original requested address.
The issue is `insert_bp_location' overwrites the previously adjusted
value in `placed_address' with the original address, that is only
replaced back with the correct adjusted address later on when
`gdbarch_breakpoint_from_pc' is called. Meanwhile there's a window
where the value in `placed_address' does not correspond to data stored
in `shadow_contents', leading to incorrect instruction bytes being
supplied when `one_breakpoint_xfer_memory' is called to supply the
instruction overlaid by the breakpoint.
And this is exactly what happens on the MIPS target with software
breakpoints placed in microMIPS code. In this case not only
`placed_address' is not the original address because of the ISA bit, but
`mips_breakpoint_from_pc' has to read the original instruction to
determine which one of the two software breakpoint instruction encodings
to choose as well. The 16-bit encoding is used to replace 16-bit
instructions and similarly the 32-bit one is used with 32-bit
instructions, to satisfy branch delay slot size requirements.
The mismatch between `placed_address' and the address data in
`shadow_contents' has been obtained from leads to the wrong encoding
being used in some cases, which in the case of a 32-bit software
breakpoint instruction replacing a 16-bit instruction causes corruption
to the adjacent following instruction and leads the debug session astray
if execution reaches there e.g. with a jump.
To address this problem I made the change below, that adds a
`reqstd_address' field to `struct bp_target_info' and leaves
`placed_address' unchanged once it has been set. This ensures data in
`shadow_contents' is always consistent with `placed_address'.
This approach also has this good side effect that all the places that
examine the breakpoint's address see a consistent value, either
`reqstd_address' or `placed_address', as required. Currently some
places see either the original or the adjusted address in
`placed_address', depending on whether they have been called before
`gdbarch_remote_breakpoint_from_pc' or afterwards. This is in
particular true for subsequent calls to
`gdbarch_remote_breakpoint_from_pc' itself, e.g. from
`one_breakpoint_xfer_memory'. This is also important for places like
`find_single_step_breakpoint' where a breakpoint's address is compared
to the raw value of $pc.
* breakpoint.h (bp_target_info): Add `reqstd_address' member,
update comments.
* breakpoint.c (one_breakpoint_xfer_memory): Use `reqstd_address'
for the breakpoint's address. Don't preinitialize `placed_size'.
(insert_bp_location): Set `reqstd_address' rather than
`placed_address'.
(bp_target_info_copy_insertion_state): Also copy `placed_address'.
(bkpt_insert_location): Use `reqstd_address' for the breakpoint's
address.
(bkpt_remove_location): Likewise.
(deprecated_insert_raw_breakpoint): Likewise.
(deprecated_remove_raw_breakpoint): Likewise.
(find_single_step_breakpoint): Likewise.
* mem-break.c (default_memory_insert_breakpoint): Use
`reqstd_address' for the breakpoint's address. Don't set
`placed_address' or `placed_size' if breakpoint contents couldn't
have been determined.
* remote.c (remote_insert_breakpoint): Use `reqstd_address' for
the breakpoint's address.
(remote_insert_hw_breakpoint): Likewise. Don't set
`placed_address' or `placed_size' if breakpoint couldn't have been
set.
* aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Use
`reqstd_address' for the breakpoint's address.
* arm-linux-nat.c (arm_linux_hw_breakpoint_initialize): Likewise.
* ia64-tdep.c (ia64_memory_insert_breakpoint): Likewise.
* m32r-tdep.c (m32r_memory_insert_breakpoint): Likewise.
* microblaze-linux-tdep.c
(microblaze_linux_memory_remove_breakpoint): Likewise.
* monitor.c (monitor_insert_breakpoint): Likewise.
* nto-procfs.c (procfs_insert_breakpoint): Likewise.
(procfs_insert_hw_breakpoint): Likewise.
* ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Likewise.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.
* remote-m32r-sdi.c (m32r_insert_breakpoint): Likewise.
* remote-mips.c (mips_insert_breakpoint): Likewise.
* x86-nat.c (x86_insert_hw_breakpoint): Likewise.
This patch is to fix PR remote/17230, which is a leftover of the
to_xfer_partial interface change. I tried splint and it reprots this
problem like this,
../../../git/gdb/remote-mips.c:2236: Return value type unsigned long long does not match declared type enum target_xfer_status: len
and this problem only exists in remote-mips.c.
gdb:
2014-08-07 Yao Qi <yao@codesourcery.com>
PR remote/17230
* remote-mips.c (mips_xfer_memory): Set *xfered_len and return
TARGET_XFER_OK instead of 0.
This makes target_ops::to_open take a const string and then fixes the
fallout.
There were a few of these I could not build. However I eyeballed it
and in any case the fixes should generally be trivial.
This is based on the patch to fix up the target debugging for to_open,
because that changes gdb to not directly install to_open as the target
command
2014-07-30 Tom Tromey <tromey@redhat.com>
* bsd-kvm.c (bsd_kvm_open): Constify.
* corelow.c (core_open): Constify.
* ctf.c (ctf_open): Constify.
* dbug-rom.c (dbug_open): Constify.
* exec.c (exec_open): Constify.
* m32r-rom.c (m32r_open, mon2000_open): Constify.
* microblaze-rom.c (picobug_open): Constify.
* nto-procfs.c (procfs_open_1, procfs_open, procfs_native_open):
Constify.
* ppcbug-rom.c (ppcbug_open0, ppcbug_open1): Constify.
* record-btrace.c (record_btrace_open): Constify.
* record-full.c (record_full_core_open_1, record_full_open_1)
(record_full_open): Constify.
* remote-m32r-sdi.c (m32r_open): Constify.
* remote-mips.c (common_open, mips_open, pmon_open, ddb_open)
(rockhopper_open, lsi_open): Constify.
* remote-sim.c (gdbsim_open): Constify.
* remote.c (remote_open, extended_remote_open, remote_open_1):
Constify.
* target.h (struct target_ops) <to_open>: Make "arg" const.
* tracefile-tfile.c (tfile_open): Constify.
This makes the argument to the target_ops to_load method "const", and
fixes up the fallout. Tested by rebuilding all the affected files.
2014-06-26 Tom Tromey <tromey@redhat.com>
* defs.h (generic_load): Update.
* m32r-rom.c (m32r_load_gen): Make "filename" const.
* monitor.c (monitor_load): Make "args" const.
* remote-m32r-sdi.c (m32r_load): Make "args" const.
* remote-mips.c (mips_load_srec, pmon_load_fast): Make "args"
const.
(mips_load): Make "file" const.
* remote-sim.c (gdbsim_load): Make "args" const.
* remote.c (remote_load): Make "name" const.
* symfile.c (generic_load): Make "args" const.
* target-delegates.c: Rebuild.
* target.c (target_load): Make "arg" const.
(debug_to_load): Make "args" const.
* target.h (struct target_ops) <to_load>: Make parameter const.
(target_load): Update.
Move infrun.c declarations out of inferior.h to a new infrun.h file.
Tested by building on:
i686-w64-mingw32, enable-targets=all
x86_64-linux, enable-targets=all
i586-pc-msdosdjgpp
And also grepped the whole tree for each symbol moved to find where
infrun.h might be necessary.
gdb/
2014-05-22 Pedro Alves <palves@redhat.com>
* inferior.h (debug_infrun, debug_displaced, stop_on_solib_events)
(sync_execution, sched_multi, step_stop_if_no_debug, non_stop)
(disable_randomization, enum exec_direction_kind)
(execution_direction, stop_registers, start_remote)
(clear_proceed_status, proceed, resume, user_visible_resume_ptid)
(wait_for_inferior, normal_stop, get_last_target_status)
(prepare_for_detach, fetch_inferior_event, init_wait_for_inferior)
(insert_step_resume_breakpoint_at_sal)
(follow_inferior_reset_breakpoints, stepping_past_instruction_at)
(set_step_info, print_stop_event, signal_stop_state)
(signal_print_state, signal_pass_state, signal_stop_update)
(signal_print_update, signal_pass_update)
(update_signals_program_target, clear_exit_convenience_vars)
(displaced_step_dump_bytes, update_observer_mode)
(signal_catch_update, gdb_signal_from_command): Move
declarations ...
* infrun.h: ... to this new file.
* amd64-tdep.c: Include infrun.h.
* annotate.c: Include infrun.h.
* arch-utils.c: Include infrun.h.
* arm-linux-tdep.c: Include infrun.h.
* arm-tdep.c: Include infrun.h.
* break-catch-sig.c: Include infrun.h.
* breakpoint.c: Include infrun.h.
* common/agent.c: Include infrun.h instead of inferior.h.
* corelow.c: Include infrun.h.
* event-top.c: Include infrun.h.
* go32-nat.c: Include infrun.h.
* i386-tdep.c: Include infrun.h.
* inf-loop.c: Include infrun.h.
* infcall.c: Include infrun.h.
* infcmd.c: Include infrun.h.
* infrun.c: Include infrun.h.
* linux-fork.c: Include infrun.h.
* linux-nat.c: Include infrun.h.
* linux-thread-db.c: Include infrun.h.
* monitor.c: Include infrun.h.
* nto-tdep.c: Include infrun.h.
* procfs.c: Include infrun.h.
* record-btrace.c: Include infrun.h.
* record-full.c: Include infrun.h.
* remote-m32r-sdi.c: Include infrun.h.
* remote-mips.c: Include infrun.h.
* remote-notif.c: Include infrun.h.
* remote-sim.c: Include infrun.h.
* remote.c: Include infrun.h.
* reverse.c: Include infrun.h.
* rs6000-tdep.c: Include infrun.h.
* s390-linux-tdep.c: Include infrun.h.
* solib-irix.c: Include infrun.h.
* solib-osf.c: Include infrun.h.
* solib-svr4.c: Include infrun.h.
* target.c: Include infrun.h.
* top.c: Include infrun.h.
* windows-nat.c: Include infrun.h.
* mi/mi-interp.c: Include infrun.h.
* mi/mi-main.c: Include infrun.h.
* python/py-threadevent.c: Include infrun.h.
This removes another yet instance of a deprecated_xfer_memory user.
Tested by building a --enable-targets=all gdb, on x86-64 Fedora 17.
gdb/
2014-02-26 Pedro Alves <palves@redhat.com>
* remote-mips.c (mips_xfer_memory): Adjust as to_xfer_partial
helper.
(mips_xfer_partial): New function.
(_initialize_remote_mips): Don't install a deprecated_xfer_memory
hook. Install a to_xfer_partial hook.
This patch is purely mechanical. It removes gdb_stat.h and changes
the code to use sys/stat.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_stat.h: Remove.
* ada-lang.c: Use sys/stat.h, not gdb_stat.h.
* common/filestuff.c: Use sys/stat.h, not gdb_stat.h.
* common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h.
* corefile.c: Use sys/stat.h, not gdb_stat.h.
* ctf.c: Use sys/stat.h, not gdb_stat.h.
* darwin-nat.c: Use sys/stat.h, not gdb_stat.h.
* dbxread.c: Use sys/stat.h, not gdb_stat.h.
* dwarf2read.c: Use sys/stat.h, not gdb_stat.h.
* exec.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h.
* inf-child.c: Use sys/stat.h, not gdb_stat.h.
* jit.c: Use sys/stat.h, not gdb_stat.h.
* linux-nat.c: Use sys/stat.h, not gdb_stat.h.
* m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h.
* main.c: Use sys/stat.h, not gdb_stat.h.
* mdebugread.c: Use sys/stat.h, not gdb_stat.h.
* mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h.
* nto-tdep.c: Use sys/stat.h, not gdb_stat.h.
* objfiles.c: Use sys/stat.h, not gdb_stat.h.
* procfs.c: Use sys/stat.h, not gdb_stat.h.
* remote-fileio.c: Use sys/stat.h, not gdb_stat.h.
* remote-mips.c: Use sys/stat.h, not gdb_stat.h.
* remote.c: Use sys/stat.h, not gdb_stat.h.
* rs6000-nat.c: Use sys/stat.h, not gdb_stat.h.
* sol-thread.c: Use sys/stat.h, not gdb_stat.h.
* solib-spu.c: Use sys/stat.h, not gdb_stat.h.
* source.c: Use sys/stat.h, not gdb_stat.h.
* symfile.c: Use sys/stat.h, not gdb_stat.h.
* symmisc.c: Use sys/stat.h, not gdb_stat.h.
* symtab.c: Use sys/stat.h, not gdb_stat.h.
* top.c: Use sys/stat.h, not gdb_stat.h.
* xcoffread.c: Use sys/stat.h, not gdb_stat.h.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
This patch constifies the target_ops method to_detach.
This is a small cleanup, but also, I think, a bug-prevention fix,
since gdb already acts as if the "args" argument here was const.
In particular, top.c:quit_force calls kill_or_detach via
iterate_over_inferiors. kill_or_detach calls target_detach, passing
the same argument each time. So, if one of these methods was not
const-correct, then kill_or_detach would change its behavior in a
strange way.
I could not build every target I modified in this patch. I've
inspected them all by hand, though. Many targets do not use the
"args" parameter; a couple pass it to atoi; and a few pass it on to
the to_detach method of the target beneath. The only code that
required a real change was in linux-nat.c, and that only needed the
introduction of a temporary variable for const-correctness.
2013-11-08 Tom Tromey <tromey@redhat.com>
* aix-thread.c (aix_thread_detach): Update.
* corelow.c (core_detach): Update.
* darwin-nat.c (darwin_detach): Update.
* dec-thread.c (dec_thread_detach): Update.
* gnu-nat.c (gnu_detach): Update.
* go32-nat.c (go32_detach): Update.
* inf-ptrace.c (inf_ptrace_detach): Update.
* inf-ttrace.c (inf_ttrace_detach): Update.
* linux-fork.c (linux_fork_detach): Update.
* linux-fork.h (linux_fork_detach): Update.
* linux-nat.c (linux_nat_detach): Update. Introduce "tem"
local for const-correctness.
* linux-thread-db.c (thread_db_detach): Update.
* monitor.c (monitor_detach): Update.
* nto-procfs.c (procfs_detach): Update.
* procfs.c (procfs_detach): Update.
* record.c (record_detach): Update.
* record.h (record_detach): Update.
* remote-m32r-sdi.c (m32r_detach): Update.
* remote-mips.c (mips_detach): Update.
* remote-sim.c (gdbsim_detach): Update.
* remote.c (remote_detach_1, remote_detach)
(extended_remote_detach): Update.
* sol-thread.c (sol_thread_detach): Update.
* target.c (target_detach): Make "args" const.
(init_dummy_target): Update.
* target.h (struct target_ops) <to_detach>: Make argument const.
(target_detach): Likewise.
* windows-nat.c (windows_detach): Update.
"info threads" changes the default source for "break" and "list", to
whatever the location of the first/bottom thread in the thread list
is...
(gdb) b start
(gdb) c
...
(gdb) list
*lists "start"*
(gdb) b 23
Breakpoint 3 at 0x400614: file test.c, line 23.
(gdb) info threads
Id Target Id Frame
* 2 Thread 0x7ffff7fcb700 (LWP 1760) "test" start (arg=0x0) at test.c:23
1 Thread 0x7ffff7fcc740 (LWP 1748) "test" 0x000000323dc08e60 in pthread_join (threadid=140737353922304, thread_return=0x0) at pthread_join.c:93
(gdb) b 23
Breakpoint 4 at 0x323dc08d90: file pthread_join.c, line 23.
^^^^^^^^^^^^^^^
(gdb) list
93 lll_wait_tid (pd->tid);
94
95
96 /* Restore cancellation mode. */
97 CANCEL_RESET (oldtype);
98
99 /* Remove the handler. */
100 pthread_cleanup_pop (0);
101
102
The issue is that print_stack_frame always sets the current sal to the
frame's sal. print_frame_info (which print_stack_frame calls to do
most of the work) also sets the last displayed sal, but only if
print_what isn't LOCATION. Now the call in question, from within
thread.c:print_thread_info, does pass in LOCATION as print_what, but
print_stack_frame doesn't have the same check print_frame_info has.
We could consider adding it, but setting these globals depending on
print_what isn't very clean, IMO. What we have is two logically
distinct operations mixed in the same function(s):
#1 - print frame, in the format specified by {print_what,
print_level and print_args}.
#2 - We're displaying a frame to the user, and I want the default
sal to point here, because the program stopped here, or the user
did some context-changing command (up, down, etc.).
So I added a new parameter to print_stack_frame & friends for point
#2, and went through all calls in the tree adjusting as necessary.
Tested on x86_64 Fedora 17.
gdb/
2013-09-17 Pedro Alves <palves@redhat.com>
PR gdb/15911
* ada-tasks.c (task_command_1): Adjust call to print_stack_frame.
* bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd):
* corelow.c (core_open):
* frame.h (print_stack_frame, print_frame_info): New
'set_current_sal' parameter.
* infcmd.c (finish_command, kill_command): Adjust call to
print_stack_frame.
* inferior.c (inferior_command): Likewise.
* infrun.c (normal_stop): Likewise.
* linux-fork.c (linux_fork_context): Likewise.
* record-full.c (record_full_goto_entry, record_full_restore):
Likewise.
* remote-mips.c (common_open): Likewise.
* stack.c (print_stack_frame): New 'set_current_sal' parameter.
Use it.
(print_frame_info): New 'set_current_sal' parameter. Set the last
displayed sal depending on the new paremeter instead of looking at
print_what.
(backtrace_command_1, select_and_print_frame, frame_command)
(current_frame_command, up_command, down_command): Adjust call to
print_stack_frame.
* thread.c (print_thread_info, restore_selected_frame)
(do_captured_thread_select): Adjust call to print_stack_frame.
* tracepoint.c (tfind_1): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames)
(mi_cmd_stack_info_frame): Likewise.
* mi/mi-interp.c (mi_on_normal_stop): Likewise.
* mi/mi-main.c (mi_cmd_exec_return, mi_cmd_trace_find): Likewise.
gdb/testsuite/
* gdb.threads/info-threads-cur-sal-2.c: New file.
* gdb.threads/info-threads-cur-sal.c: New file.
* gdb.threads/info-threads-cur-sal.exp: New file.
http://sourceware.org/ml/gdb-patches/2013-07/msg00777.html
gdb/ChangeLog
* remote-mips.c (mips_error): Replace use of
deprecated_throw_reason with throw_verror. Use the error message
passed to mips_error as the error message for throw_verror.
This patch fixes the target double-close problem (PR remote/15266),
and in the process removes pop_target entire (PR remote/15256).
The first issue is that pop_target calls target_close. However, it
then calls unpush_target, which also calls target_close. This means
targets must be able to be closed twice. Not only is this strange,
but it also directly contradicts the contract of to_xclose targets.
(We currently have just a single such target, and it is never pushed;
but I plan to add more, and so this latent bug is triggered.)
The second issue is that it seems to me that calling pop_target is
often unsafe. This is what cropped up in 15256, where the remote
target assumed that it could pop_target -- but there was another
target higher on the stack, leading to confusion.
But, it is always just as easy to call unpush_target as it is to call
pop_target; and it is also safer. So, removing pop_target seemed like
an improvement.
Finally, this adds an assertion to target_close to ensure that no
currently-pushed target can be closed.
Built and regtested on x86-64 Fedora 18; both natively and using the
native-gdbserver board file.
PR remote/15256, PR remote/15266:
* bfd-target.c (target_bfd_reopen): Initialize to_magic.
* monitor.c (monitor_detach): Use unpush_target.
* remote-m32r-sdi.c (m32r_detach): Use unpush_target.
* remote-mips.c (mips_detach): Use unpush_target. Don't
call mips_close.
* remote-sim.c (gdbsim_detach): Use unpush_target.
* target.c (pop_target): Remove.
(pop_all_targets_above): Don't call target_close.
(target_close): Assert that the target is unpushed.
* target.h (pop_target): Don't declare.
* tracepoint.c (tfile_open): Use unpush_target.
remote-mips.c has a few 'return's where cleanups are not run.
* remote-mips.c (mips_exit_debug): Call do_cleanups on all
return paths.
(mips_initialize): Likewise.
(common_open): Call do_cleanups.
remote-mips.c has a bunch of -Wpointer-sign warnings:
../../src/gdb/remote-mips.c: In function ‘mips_receive_packet’:
../../src/gdb/remote-mips.c:1128:7: error: pointer targets in passing argument 2 of ‘mips_cksum’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:830:1: note: expected ‘const unsigned char *’ but argument is of type ‘char *’
../../src/gdb/remote-mips.c:1135:7: error: pointer targets in passing argument 2 of ‘mips_cksum’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:830:1: note: expected ‘const unsigned char *’ but argument is of type ‘char *’
../../src/gdb/remote-mips.c: In function ‘mips_load_srec’:
../../src/gdb/remote-mips.c:2830:12: error: pointer targets in passing argument 4 of ‘mips_make_srec’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:134:12: note: expected ‘unsigned char *’ but argument is of type ‘char *’
../../src/gdb/remote-mips.c: In function ‘pmon_zeroset’:
../../src/gdb/remote-mips.c:3030:3: error: pointer targets in passing argument 4 of ‘pmon_makeb64’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:2977:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/remote-mips.c: In function ‘pmon_make_fastrec’:
../../src/gdb/remote-mips.c:3124:6: error: pointer targets in passing argument 3 of ‘pmon_zeroset’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:3025:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/remote-mips.c:3126:4: error: pointer targets in passing argument 4 of ‘pmon_makeb64’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:2977:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/remote-mips.c:3148:3: error: pointer targets in passing argument 3 of ‘pmon_zeroset’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:3025:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/remote-mips.c:3153:3: error: pointer targets in passing argument 3 of ‘pmon_zeroset’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:3025:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/remote-mips.c:3154:8: error: pointer targets in passing argument 4 of ‘pmon_makeb64’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:2977:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/remote-mips.c: In function ‘pmon_load_fast’:
../../src/gdb/remote-mips.c:3423:2: error: pointer targets in passing argument 4 of ‘pmon_makeb64’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:2977:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/remote-mips.c:3457:4: error: pointer targets in passing argument 3 of ‘pmon_checkset’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:3051:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/remote-mips.c:3484:8: error: pointer targets in passing argument 3 of ‘pmon_zeroset’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:3025:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/remote-mips.c:3489:3: error: pointer targets in passing argument 3 of ‘pmon_checkset’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:3051:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
The mips packet payload is ASCII, so it makes sense for
mips_send_packet and mips_receive_packet to expose 'char *'-based
interfaces, as currently they do. But, mips packets have a binary
header, so if you look at e.g., mips_receive_packet's implementation,
you'll see "unsigned char" buffers in use. I find it the most natural
to make the payload pointer passed to mips_cksum 'char *' too.
The other changes are straightforward adjustments -- a checksum is
naturally unsigned, and there's one point where we're reading a bfd section.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* remote-mips.c (mips_cksum): Rename 'data' parameter to 'datastr'
and change its type to 'const char *'. Adjust.
(mips_send_packet): Add cast to 'char *', and remove cast to
'unsigned char *'.
(mips_receive_packet): Remove cast to 'unsigned char *'.
(mips_load_srec): Use bfd_byte.
(pmon_makeb64, pmon_zeroset): Make 'chksum' parameter unsigned.
(pmon_checkset): Make 'value' parameter unsigned.
-Wpointer-sign catches all these cases across the codebase that should
be using gdb_byte for raw target bytes. I think these are all
obvious, hence I've collapsed into a single patch.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_default_breakpoint): Change type to
gdb_byte[].
(aarch64_breakpoint_from_pc): Change return type to gdb_byte *.
* ada-lang.c (ada_value_assign): Use gdb_byte.
* alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[].
(alphanbsd_sigtramp_offset): Use gdb_byte.
* arm-linux-tdep.c (arm_linux_arm_le_breakpoint)
(arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint)
(eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint)
(arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint)
(arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[].
* arm-tdep.c (arm_stub_unwind_sniffer)
(arm_displaced_init_closure): Use gdb_byte.
(arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint)
(arm_default_thumb_le_breakpoint)
(arm_default_thumb_be_breakpoint): Change type to gdb_byte[].
* arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint,
thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *.
* arm-wince-tdep.c (arm_wince_le_breakpoint)
(arm_wince_thumb_le_breakpoint): Change type to gdb_byte[].
* armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint)
(arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint)
(arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[].
* armobsd-tdep.c (arm_obsd_thumb_le_breakpoint)
(arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[].
* cris-tdep.c (push_stack_item, cris_push_dummy_call)
(cris_store_return_value, cris_extract_return_value): Use
gdb_byte.
(constraint): Change type of parameter to char * from signed
char*. Use gdb_byte.
* dwarf2loc.c (read_pieced_value, write_pieced_value): Change type
of local buffer to gdb_byte *.
* dwarf2read.c (read_index_from_section): Use gdb_byte.
(create_dwp_hash_table): Change type of locals to gdb_byte *.
(add_address_entry): Change type of local buffer to gdb_byte[].
* frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr)
(frv_push_dummy_call): Use gdb_byte.
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code)
(hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide)
(hppa_hpux_supply_save_state): Use gdb_byte.
* hppa-tdep.c (hppa32_push_dummy_call)
(hppa64_convert_code_addr_to_fptr): Use gdb_byte.
* ia64-tdep.c (extract_bit_field, replace_bit_field)
(slotN_contents, replace_slotN_contents): Change type of parameter
to gdb_byte *.
(fetch_instruction, ia64_pseudo_register_write)
(ia64_register_to_value, ia64_value_to_register)
(ia64_extract_return_value, ia64_store_return_value)
(ia64_push_dummy_call): Use gdb_byte.
* m32c-tdep.c (m32c_return_value): Remove cast.
* m68hc11-tdep.c (m68hc11_pseudo_register_write)
(m68hc11_push_dummy_call, m68hc11_store_return_value): Use
gdb_byte.
* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte.
* mn10300-tdep.c (mn10300_store_return_value)
(mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use
gdb_byte.
* moxie-tdep.c (moxie_process_readu): Use gdb_byte.
(moxie_process_record): Remove casts.
* ppc-ravenscar-thread.c (supply_register_at_address)
(ppc_ravenscar_generic_store_registers): Use gdb_byte.
* ravenscar-thread.c (get_running_thread_id): Use gdb_byte.
* remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte.
* remote-mips.c (mips_xfer_memory): Use gdb_byte.
* remote.c (compare_sections_command): Use gdb_byte.
* score-tdep.c (score7_free_memblock): Change type of parameter to
gdb_byte *.
* sh-tdep.c (sh_justify_value_in_reg): Change return type to
gdb_byte *. Use gdb_byte.
(sh_push_dummy_call_fpu): Use gdb_byte.
(sh_extract_return_value_nofpu, sh_extract_return_value_fpu)
(sh_store_return_value_nofpu, sh_store_return_value_fpu)
(sh_register_convert_to_virtual, sh_register_convert_to_raw):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte.
* sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte.
(sh64_store_return_value, sh64_register_convert_to_virtual):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh64_pseudo_register_write): Use gdb_byte.
* solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'.
* solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte
buffer.
(irix_current_sos): Use gdb_byte.
* solib-som.c (som_current_sos): Use gdb_byte.
* sparc-ravenscar-thread.c (supply_register_at_address)
(sparc_ravenscar_generic_store_registers): Use gdb_byte.
* spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
* spu-tdep.c (spu_get_overlay_table): Use gdb_byte.
* tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to
'gdb_byte *'.
* tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to
'gdb_byte *'.
* tracepoint.c (tfile_fetch_registers): Use gdb_byte.
* xstormy16-tdep.c (xstormy16_extract_return_value)
(xstormy16_store_return_value): Change parameter type to
'gdb_byte *'. Adjust.
(xstormy16_push_dummy_call): Use gdb_byte.
* xtensa-tdep.c (xtensa_scan_prologue, call0_ret)
(call0_analyze_prologue, execute_code): Use gdb_byte.
gdb_byte should be used for bytes from the program being debugged. We
have many places using char or unsigned char instead all over the
existing ports, and more ends up added over time due to copy/paste as
new code is based on old code.
I've greped the tree for "char buf[", and fixed all I found.
Tested by building with --enable-targets=all.
2013-03-01 Pedro Alves <palves@redhat.com>
Use gdb_byte for bytes from the program being debugged.
* arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
Change type of local 'buf' to gdb_byte.
* avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
* bfin-tdep.c (bfin_push_dummy_call): Likewise.
* cris-tdep.c (cris_sigcontext_addr)
(cris_sigtramp_frame_unwind_cache): Likewise.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
(frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
Likewise.
* frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
* hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
(hppa32_hpux_search_dummy_call_sequence)
(hppa_hpux_supply_save_state): Likewise.
* hppa-linux-tdep.c (insns_match_pattern)
(hppa_linux_find_global_pointer): Likewise.
* hppa-tdep.c (hppa_in_function_epilogue_p)
(skip_prologue_hard_way, hppa_frame_cache): Likewise.
* i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
* i386fbsd-tdep.c (i386fbsd_supply_uthread)
(i386fbsd_collect_uthread): Likewise.
* ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
* ia64-tdep.c (examine_prologue, ia64_frame_cache)
(ia64_frame_prev_register, ia64_sigtramp_frame_cache)
(ia64_sigtramp_frame_prev_register, ia64_access_reg)
(ia64_access_rse_reg, ia64_libunwind_frame_this_id)
(ia64_libunwind_frame_prev_register)
(ia64_libunwind_sigtramp_frame_this_id)
(ia64_find_global_pointer_from_dynamic_section)
(find_extant_func_descr, find_func_descr, ia64_dummy_id)
(ia64_unwind_pc): Likewise.
* iq2000-tdep.c (iq2000_store_return_value): Likewise.
* m68hc11-tdep.c (m68hc11_push_dummy_call)
(m68hc11_extract_return_value): Likewise.
* m68klinux-nat.c (fetch_register, store_register): Likewise.
* mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
(mep_get_insn, mep_push_dummy_call): Likewise.
* mips-linux-tdep.c (mips_linux_get_longjmp_target)
(mips_linux_in_dynsym_stub): Likewise.
* mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
* ppc-linux-nat.c (fetch_register, store_register): Likewise.
* regcache.c (dump_endian_bytes): Change type of parameter 'buf'
to gdb_byte.
* remote-mips.c (mips_set_register): Likewise.
* remote-sim.c (gdbsim_fetch_register): Likewise.
* score-tdep.c (score7_fetch_inst): Change type of parameter
'memblock' and local 'buf' to gdb_byte.
(score7_malloc_and_get_memblock): Change return type to gdb_byte.
Change type of local 'buf' to gdb_byte. Adjust.
(score7_adjust_memblock_ptr): Change type of parameter 'memblock'
to gdb_byte**.
(score7_analyze_prologue): Change type of 'memblock' and
'memblock_ptr' locals to gdb_byte*.
* sh64-tdep.c (sh64_extract_return_value)
(sh64_store_return_value): Change type of local 'buf' to gdb_byte.
* solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
* solib-pa64.c (pa64_solib_create_inferior_hook)
(pa64_open_symbol_file_object): Remove local 'buf'.
* solib-som.c (som_solib_create_inferior_hook, link_map_start)
(som_open_symbol_file_object): Likewise.
* solib-spu.c (spu_current_sos): Likewise.
* spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
* spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
(spu_store_registers): Likewise.
* target.c (debug_print_register): Likewise.
* tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
* xstormy16-tdep.c (xstormy16_store_return_value)
(xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
(xstormy16_find_jmp_table_entry): Likewise.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
gdb_bfd_unref.
(free_dwo_file): Use gdb_bfd_unref.
* cli/cli-dump.c: Include gdb_bfd.h.
(bfd_openw_with_cleanup): Use gdb_bfd_ref.
(bfd_openr_with_cleanup): Likewise.
* windows-nat.c (windows_make_so): Use gdb_bfd_ref,
gdb_bfd_unref.
* utils.c: Include gdb_bfd.h.
(do_bfd_close_cleanup): Use gdb_bfd_unref.
* symfile.c: Include gdb_bfd.h.
(separate_debug_file_exists): Use gdb_bfd_unref.
(bfd_open_maybe_remote): Use gdb_bfd_ref.
(symfile_bfd_open): Use gdb_bfd_ref, gdb_bfd_unref.
(generic_load): Use gdb_bfd_ref.
(reread_symbols): Use gdb_bfd_unref.
* symfile-mem.c: Include gdb_bfd.h.
(symbol_file_add_from_memory): Use make_cleanup_bfd_close.
* spu-linux-nat.c (spu_bfd_open): Use gdb_bfd_ref, gdb_bfd_unref.
* solib.c: Include gdb_bfd.h.
(solib_bfd_fopen): Use gdb_bfd_ref.
(solib_bfd_open): Use gdb_bfd_unref.
(free_so_symbols): Use gdb_bfd_unref.
(reload_shared_libraries_1): Use gdb_bfd_unref.
* solib-spu.c: Include gdb_bfd.h.
(spu_bfd_fopen): Use gdb_bfd_ref, gdb_bfd_unref.
* solib-pa64.c (pa64_solib_create_inferior_hook): Use gdb_bfd_ref,
gdb_bfd_unref.
* solib-frv.c: Include gdb_bfd.h.
(enable_break2): Use gdb_bfd_unref.
* solib-dsbt.c: Include gdb_bfd.h.
(enable_break2): Use gdb_bfd_unref.
* solib-darwin.c: Include gdb_bfd.h.
(darwin_solib_get_all_image_info_addr_at_init): Use gdb_bfd_ref,
gdb_bfd_unref.
(darwin_bfd_open): Use gdb_bfd_unref.
* rs6000-nat.c (add_vmap): Use gdb_bfd_ref, gdb_bfd_unref.
* remote-mips.c: Include gdb_bfd.h.
(mips_load_srec): Use gdb_bfd_ref.
(pmon_load_fast): Use gdb_bfd_ref.
* remote-m32r-sdi.c: Include gdb_bfd.h.
(m32r_load): Use gdb_bfd_ref.
* record.c: Include gdb_bfd.h.
(record_save_cleanups): Use gdb_bfd_unref.
(cmd_record_save): Use gdb_bfd_unref.
* procfs.c (insert_dbx_link_bpt_in_file): Use gdb_bfd_ref,
gdb_bfd_unref.
* objfiles.h (gdb_bfd_close_or_warn): Remove.
(gdb_bfd_ref, gdb_bfd_unref): Move to gdb_bfd.h.
* objfiles.c: Include gdb_bfd.h.
(free_objfile): Use gdb_bfd_unref.
(gdb_bfd_close_or_warn, gdb_bfd_ref, gdb_bfd_unref): Move to
gdb_bfd.c.
* machoread.c (macho_add_oso_symfile): Use gdb_bfd_unref.
(macho_symfile_read_all_oso): Use gdb_bfd_ref, gdb_bfd_unref.
(macho_check_dsym): Likewise.
* m32r-rom.c: Include gdb_bfd.h.
(m32r_load): Use gdb_bfd_ref.
(m32r_upload_command): Use gdb_bfd_ref.
* jit.c: Include gdb_bfd.h.
(jit_bfd_try_read_symtab): Use gdb_bfd_ref, gdb_bfd_unref.
* gdb_bfd.h: New file.
* gdb_bfd.c: New file.
* gcore.c: Include gdb_bfd.h.
(create_gcore_bfd): Use gdb_bfd_ref.
(do_bfd_delete_cleanup): Use gdb_bfd_unref.
(gcore_command): Use gdb_bfd_unref.
* exec.c: Include gdb_bfd.h.
(exec_close): Use gdb_bfd_unref.
(exec_close_1): Use gdb_bfd_unref.
(exec_file_attach): Use gdb_bfd_ref.
* elfread.c: Include gdb_bfd.h.
(build_id_verify): Use gdb_bfd_unref.
* dsrec.c: Include gdb_bfd.h.
(load_srec): Use gdb_bfd_ref.
* corelow.c: Include gdb_bfd.h.
(core_close): Use gdb_bfd_unref.
(core_open): Use gdb_bfd_ref.
* bfd-target.c: Include gdb_bfd.h.
(target_bfd_xclose): Use gdb_bfd_unref.
(target_bfd_reopen): Use gdb_bfd_ref.
* Makefile.in (SFILES): Add gdb_bfd.c.
(HFILES_NO_SRCDIR): Add gdb_bfd.h.
(COMMON_OBS): Add gdb_bfd.o.
Fix -Wmissing-prototypes build.
* alpha-tdep.c (alpha_deal_with_atomic_sequence): Make it static.
* amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): New prototype.
* amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Likewise.
* arm-symbian-tdep.c (arm_symbian_skip_trampoline_code): Make it static.
(_initialize_arm_symbian_tdep): New prototype.
* arm-wince-tdep.c (arm_wince_skip_main_prologue): Make it static.
* i386-darwin-tdep.c (_initialize_i386_darwin_tdep): New prototype.
* i386-linux-tdep.c (i386_linux_displaced_step_copy_insn): Make it
static.
* lm32-tdep.c (_initialize_lm32_tdep): New prototype.
* microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): New
prototype.
* microblaze-tdep.c (microblaze_debug, microblaze_fetch_instruction)
(microblaze_skip_prologue, microblaze_frame_cache): Make them static.
* mips-linux-tdep.c (mips_linux_regset_from_core_section): Make it
static.
* moxie-tdep.c (moxie_process_record): Likewise.
* remote-mips.c (mips_can_use_watchpoint, mips_insert_watchpoint)
(mips_remove_watchpoint, mips_stopped_by_watchpoint): Make them static.
* rl78-tdep.c (rl78_breakpoint_from_pc): Make it static.
(_initialize_rl78_tdep): New prototype.
* rx-tdep.c (rx_breakpoint_from_pc): Make it static.
(_initialize_rx_tdep): New prototype.
* solib-darwin.c (darwin_in_dynsym_resolve_code): Make it static.
(_initialize_darwin_solib): New prototype.
* solib-spu.c: Include solib-spu.h.
(_initialize_spu_solib): New prototype.
* spu-multiarch.c (_initialize_spu_multiarch): New prototype.
* tic6x-tdep.c (tic6x_analyze_prologue, tic6x_skip_prologue)
(tic6x_breakpoint_from_pc, tic6x_frame_unwind_cache)
(tic6x_software_single_step): Make it static.
(_initialize_tic6x_tdep): New prototype.
Joel Brobecker
Gary Benson
Maciej W. Rozycki
Yao Qi
Tom Tromey
Pedro Alves
Markus Metzger
Andrew Burgess
Jan Kratochvil
Joel Brobecker
Sergio Durigan Junior
Doug Evans
Pierre Muller
Kevin Buettner
Michael Snyder