Another significant difference in the ELFv2 ABI is that "homogeneous"
floating-point and vector aggregates, i.e. aggregates the consist
(recursively) only of members of the same floating-point or vector type,
are passed in a series of floating-point / vector registers, as if they
were seperate parameters. (This is similar to the ARM ABI.) This
applies to both calls and returns.
In addition when returning any aggregate of up to 16 bytes, ELFv2 now
used general-purpose registers.
This patch adds support for these aspects of the ABI, which is relatively
straightforward after the refactoring patch to ppc-sysv-tdep.c.
gdb/ChangeLog:
* ppc-sysv-tdep.c (ppc64_aggregate_candidate): New routine.
(ppc64_elfv2_abi_homogeneous_aggregate): Likewise.
(ppc64_sysv_abi_push_param): Handle ELFv2 homogeneous structs.
(ppc64_sysv_abi_return_value): Likewise. Also, handle small
structures returned in GPRs.
This implementes another change in ELFv2: the stack frame no longer
contains the reserved double words for linker and compiler use
(which weren't really used for much of anything anyway). This
affects placement of on-stack parameters in inferior calls.
gdb/ChangeLog:
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Use correct
offset to the stack parameter list for the ELFv2 ABI.
This implements the most significant difference with the ELFv2 ABI:
we no longer use function descriptors. The patch consists mostly
of switching off code to deal with descriptors :-)
In addition, when calling an inferior function, we no longer need
to provide its TOC in r2. Instead, ELFv2 code expects to be called
with r12 pointing to the code address itself.
gdb/ChangeLog:
* ppc-linux-tdep.c (ppc_linux_init_abi): Only call
set_gdbarch_convert_from_func_ptr_addr and
set_gdbarch_elf_make_msymbol_special for ELFv1.
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_param): Only handle
function descriptors on ELFv1.
(ppc64_sysv_abi_push_dummy_call): Likewise. On ELFv2,
set up r12 at function entry.
The powerpc64le-linux ABI specifies that when a 128-bit DFP value is
passed in a pair of floating-point registers, the first register holds
the most-significant part of the value. This is as opposed to the
usual rule on little-endian systems, where the first register would
hold the least-significant part.
This affects two places in GDB, the read/write routines for the
128-bit DFP pseudo-registers, and the function call / return
sequence. For the former, current code already distinguishes
between big- and little-endian targets, but gets the latter
wrong. This is presumably because *GCC* also got it wrong,
and GDB matches the old GCC behavior. But GCC is now fixed:
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg02145.html
so GDB needs to be fixed too. (Old code shouldn't really be
an issue since there is no code "out there" so far that uses
dfp128 on little-endian ...)
gdb/ChangeLog:
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
within a register pair holding a DFP 128-bit value on little-endian.
(ppc64_sysv_abi_return_value_base): Likewise.
* rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
(dfp_pseudo_register_write): Likewise.
gdb/testsuite/ChangeLog:
* gdb.arch/powerpc-d128-regs.exp: Enable on powerpc64*-*.
Passing a 32-bit DFP in register needs to use the least-significant part
of the register. Like with a previous patch that addressed the same
issue for small structs, this patch makes sure the appropriate offset
is used on little-endian systems.
gdb/ChangeLog:
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
offset on little-endian when passing _Decimal32.
(ppc64_sysv_abi_return_value_base): Likewise for return values.
When passing a small structure in a GPR, the ABI specifies that it
should be passed in the least-significant bytes of the register
(or stack slot). On big-endian systems, this means the value
needs to be stored at an offset, which is what current code does.
However, on little-endian systems, the least-significant bytes are
addresses with offset 0. This patch fixes that.
gdb/ChangeLog:
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
offset on little-endian when passing small structures.
This patch refactors the ppc64 function call and return value handling code
in ppc-sysv-tdep.c. The main problem to be addressed by this refactoring
is the code duplication caused by certain aggregate types:
According to the ABI, some types are to be decomposed into component types
for parameter and return value handling. For example, complex types are
to be passed as if the real and imaginary component were separate arguments.
Similarly, certain OpenCL vector types are passed as if they were multiple
separate arguments of the vector element type. With the new ELFv2 ABI,
there is another case: "homogeneous aggregates" (e.g. a struct containing
4 floats) are passed in multiple floating point registers as well.
Unfortunately, the current code is not structured to easily model these
ABI properties. For example, code to pass complex values re-implements
code to pass the underlying (floating-point) type. This has already
led to some unfortunate code duplication, and with the addition of
ELFv2 ABI support, I would have had to add yet more such duplication.
To avoid that, I've decided to refactor the code in order to re-use
subroutines that handle the "base" types when handling those aggregate
types. This was not intended to cause any difference on current
(ELFv1) ABI code, but in fact it fixes a bug:
FAIL: gdb.base/varargs.exp: print find_max_float_real(4, fc1, fc2, fc3, fc4)
This was caused by the old code in ppc64_sysv_abi_push_float incorrectly
handling floating-point arguments to vararg routines, which just happens
to work out correctly automatically in the refactored code ...
gdb/ChangeLog:
* ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
(struct ppc64_sysv_argpos): New data structure.
(ppc64_sysv_abi_push_float): Remove.
(ppc64_sysv_abi_push_val): New function.
(ppc64_sysv_abi_push_integer): Likewise.
(ppc64_sysv_abi_push_freg): Likewise.
(ppc64_sysv_abi_push_vreg): Likewise.
(ppc64_sysv_abi_push_param): Likewise.
(ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
(ppc64_sysv_abi_return_value_base): New function.
(ppc64_sysv_abi_return_value): Refactor to use it.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* breakpoint.h (bp_location): Add related_address member.
* inferior.h (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
* value.h (using_struct_return): Likewise.
* gdbarch.sh (return_value): Take a pointer to struct value
instead of struct type for the function requested.
* breakpoint.c (set_breakpoint_location_function): Initialize
related_address for bp_gnu_ifunc_resolver breakpoints.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the
requested function's address to gdbarch_return_value.
* eval.c (evaluate_subexp_standard): Pass the requested
function's address to using_struct_return.
* infcall.c (call_function_by_hand): Pass the requested
function's address to using_struct_return and
gdbarch_return_value.
* infcmd.c (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
(print_return_value): Update accordingly.
(finish_command_continuation): Likewise.
* stack.c (return_command): Pass the requested function's
address to using_struct_return and gdbarch_return_value.
* value.c (using_struct_return): Take a pointer to struct value
instead of struct type for the function requested. Pass the
requested function's address to gdbarch_return_value.
* python/py-finishbreakpoint.c (finish_breakpoint_object):
New function_value member, replacing function_type.
(bpfinishpy_dealloc): Update accordingly.
(bpfinishpy_pre_stop_hook): Likewise.
(bpfinishpy_init): Likewise. Record the requested function's
address.
* mips-tdep.c (mips_fval_reg): New enum.
(mips_o32_push_dummy_call): For MIPS16 FP doubles do not swap
words put in GP registers.
(mips_o64_push_dummy_call): Update a comment.
(mips_o32_return_value): Take a pointer to struct value instead
of struct type for the function requested and use it to check if
using the MIPS16 calling convention. Return the designated
general purpose registers for floating-point values returned in
MIPS16 mode.
(mips_o64_return_value): Likewise.
* ppc-tdep.h (ppc_sysv_abi_return_value): Update prototype.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* alpha-tdep.c (alpha_return_value): Take a pointer to struct
value instead of struct type for the function requested.
* amd64-tdep.c (amd64_return_value): Likewise.
* amd64-windows-tdep.c (amd64_windows_return_value): Likewise.
* arm-tdep.c (arm_return_value): Likewise.
* avr-tdep.c (avr_return_value): Likewise.
* bfin-tdep.c (bfin_return_value): Likewise.
* cris-tdep.c (cris_return_value): Likewise.
* frv-tdep.c (frv_return_value): Likewise.
* h8300-tdep.c (h8300_return_value): Likewise.
(h8300h_return_value): Likewise.
* hppa-tdep.c (hppa32_return_value): Likewise.
(hppa64_return_value): Likewise.
* i386-tdep.c (i386_return_value): Likewise.
* ia64-tdep.c (ia64_return_value): Likewise.
* iq2000-tdep.c (iq2000_return_value): Likewise.
* lm32-tdep.c (lm32_return_value): Likewise.
* m32c-tdep.c (m32c_return_value): Likewise.
* m32r-tdep.c (m32r_return_value): Likewise.
* m68hc11-tdep.c (m68hc11_return_value): Likewise.
* m68k-tdep.c (m68k_return_value): Likewise.
(m68k_svr4_return_value): Likewise.
* m88k-tdep.c (m88k_return_value): Likewise.
* mep-tdep.c (mep_return_value): Likewise.
* microblaze-tdep.c (microblaze_return_value): Likewise.
* mn10300-tdep.c (mn10300_return_value): Likewise.
* moxie-tdep.c (moxie_return_value): Likewise.
* mt-tdep.c (mt_return_value): Likewise.
* ppc-linux-tdep.c (ppc_linux_return_value): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Likewise.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* ppcnbsd-tdep.c (ppcnbsd_return_value): Likewise.
* rl78-tdep.c (rl78_return_value): Likewise.
* rs6000-aix-tdep.c (rs6000_return_value): Likewise.
* rx-tdep.c (rx_return_value): Likewise.
* s390-tdep.c (s390_return_value): Likewise.
* score-tdep.c (score_return_value): Likewise.
* sh-tdep.c (sh_return_value_nofpu): Likewise.
(sh_return_value_fpu): Likewise.
* sh64-tdep.c (sh64_return_value): Likewise.
* sparc-tdep.c (sparc32_return_value): Likewise.
* sparc64-tdep.c (sparc64_return_value): Likewise.
* spu-tdep.c (spu_return_value): Likewise.
* tic6x-tdep.c (tic6x_return_value): Likewise.
* v850-tdep.c (v850_return_value): Likewise.
* vax-tdep.c (vax_return_value): Likewise.
* xstormy16-tdep.c (xstormy16_return_value): Likewise.
* xtensa-tdep.c (xtensa_return_value): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
gdb/testsuite/
* gdb.base/return-nodebug.exp: Also test float and double types.
(ppc_sysv_abi_push_dummy_call): Use it.
(do_ppc_sysv_return_value): Likewise.
(ppc64_sysv_abi_push_dummy_call): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
Our testsuite noticed a crash when trying to call a function which
requires GDB to allocate memory in the inferior. Typically, this
happens when one of the parameters is a string. For instance, our
testcase tries:
(gdb) call debug.trace (me, "You")
[1] 32737 segmentation fault /path/to/gdb
What happens is that GDB sees the string, and thus tries to allocate
memory for it in the inferior:
> /* Allocate NBYTES of space in the inferior using the inferior's
> malloc and return a value that is a pointer to the allocated
> space. */
>
> struct value *
> value_allocate_space_in_inferior (int len)
> {
> struct objfile *objf;
> struct value *val = find_function_in_inferior ("malloc", &objf);
And find_function_in_inferior first searches the symtab in case
we have debug info. But, in our case (bareboard powerpc), we don't,
so it gets "malloc"'s address from the minimal symbols, and builds
a value whose type is a TYPE_CODE_PTR, not a TYPE_CODE_FUNC.
As a result, when we later try to make the call to malloc, we end up
inside the powerpc tdep code that has:
> do_ppc_sysv_return_value (struct gdbarch *gdbarch, struct type *func_type,
[...]
> if (func_type
> && TYPE_CALLING_CONVENTION (func_type) == DW_CC_GDB_IBM_OpenCL)
The problem is that func_type is not a TYPE_CODE_FUNC, and thus
the type-specific kind is not TYPE_SPECIFIC_FUNC, and so we do
TYPE_CALLING_CONVENTION is an invalid access.
Interestingly, the other call to TYPE_CALLING_CONVENTION is correctly
preceded by a check of the type's TYPE_CODE (making sure that it is
TYPE_CODE_FUNC).
gdb/ChangeLog:
* ppc-sysv-tdep.c (do_ppc_sysv_return_value): Do not check
FUNC_TYPE's calling convention if FUNC_TYPE is not a function.
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Add support
for the "generic" vector ABI used with GCC 4.3 and later.
(ppc64_sysv_abi_return_value): Likewise.
gdb/testsuite:
* gdb.arch/altivec-abi.exp: Skip "generic" tests on 64-bit when
using a GCC 4.1 or 4.2 compiler. Add an additional test variant
"generic ABI, auto".
(altivec_abi_tests): Accept vectors returned by reference.
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Implement
correct ABI for AltiVec vector arguments.
testsuite/ChangeLog:
* gdb.arch/altivec-abi.c (vec_func): Make use of intv_on_stack_f
when computing result.
* gdb.arch/altivec-abi.exp: Update expected results.
platforms that use function descriptors. Prefer to use function
pointer types instead of function types.
* linespec.c (decode_objc): Support function descriptors. Fully
initialize SAL result.
* objc-lang.c (find_methods): Support function descriptors.
Do not require function symbol to point to text section.
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): When calling
via a function pointer, use the descriptor it points to.
decimal floating-point values in GPRs for soft-float.
(do_ppc_sysv_return_value): Handle returning decimal
floating-point values in GPRs for soft-float.
TYPE_CODE_BOOL and TYPE_CODE_CHAR the same as TYPE_CODE_INT.
Handle TYPE_CODE_REF the same as TYPE_CODE_PTR.
Handle TYPE_CODE_METHOD the same as TYPE_CODE_FUNC.
Allow typedefs when checking for function pointer arguments.
Right-align small structs passed on the stack.
(ppc64_sysv_abi_return_value): Handle TYPE_CODE_BOOL and
TYPE_CODE_CHAR the same as TYPE_CODE_INT.
Handle TYPE_CODE_REF the same as TYPE_CODE_PTR.
Thiago Jung Bauermann <bauerman@br.ibm.com>
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Pass floats that
don't fit into registerson the stack the way GCC does.
TYPE_CODE_DECFLOAT arguments.
(ppc64_sysv_abi_push_dummy_call) Likewise.
(get_decimal_float_return_value): New function.
(do_ppc_sysv_return_value): Add support for TYPE_CODE_DECFLOAT return
values by calling get_decimal_float_return_value.
(ppc64_sysv_abi_return_value): Likewise.
Daniel Jacobowitz <dan@codesourcery.com>
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Right-align
struct values smaller than one doubleword; left-align those
larger. Pass structs containing a single floating-point value in
registers.
soft float and vector ABIs. Support the generic vector ABI for
AltiVec types.
(do_ppc_sysv_return_value): Likewise. Correct argument types and
casts.
(ppc64_sysv_abi_push_dummy_call): Assert that floating point is
supported.
* ppc-tdep.h (enum powerpc_vector_abi): New.
(struct gdbarch_tdep): Add soft_float and vector_abi.
* rs6000-tdep.c (setpowerpccmdlist, showpowerpccmdlist)
(powerpc_soft_float_global, powerpc_vector_strings)
(powerpc_vector_abi_global, powerpc_vector_abi_string): New.
(rs6000_gdbarch_init): Check for soft-float and vector ABI markings.
(set_powerpc_command, show_powerpc_command, powerpc_set_soft_float)
(powerpc_set_vector_abi): New.
(_initialize_rs6000_tdep): Register "set powerpc" and "show powerpc"
commands.
* Makefile.in (elf_ppc_h): New.
(rs6000-tdep.o): Update.
* gdb.texinfo (PowerPC): Document "set powerpc vector-abi" and "set
powerpc soft-float".
* gdb.arch/altivec-abi.exp: Run multiple times for GCC on GNU/Linux.
Test "set powerpc vector-abi". Skip auto-detection tests for old
toolchains.
Joel Brobecker
Gary Benson
Tom Tromey
Ulrich Weigand
Tiago Daitx
Sergio Durigan Junior
Joel Brobecker
Maciej W. Rozycki
Ulrich Weigand
Michael Snyder
Joseph Myers
Thiago Jung Bauermann
Corinna Vinschen
Mark Kettenis
Daniel Jacobowitz
Markus Deuling