When GDB is configured with "--without-tui --with-curses" or "--with-tui",
$prefer_curses is set to yes. But, that still doesn't mean that curses
will be used. configure will still search for the curses library, and
continue building without it. That's done here:
curses_found=no
if test x"$prefer_curses" = xyes; then
...
AC_SEARCH_LIBS(waddstr, [ncurses cursesX curses])
if test "$ac_cv_search_waddstr" != no; then
curses_found=yes
fi
fi
So if waddstr is not found, meaning curses is not really
available, even though it'd be preferred, $prefer_curses is
'yes', but $curses_found is 'no'.
So the right fix to tell whether we're linking with curses is
$curses_found=yes.
gdb/ChangeLog:
2015-01-22 Pedro Alves <palves@redhat.com>
* configure.ac [*mingw32*]: Check $curses_found instead of
$prefer_curses.
* configure: Regenerate.
* windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
HAVE_NCURSES_NCURSES_H checks.
gdb/
2015-01-17 Eli Zaretskii <eliz@gnu.org>
* configure.ac [*mingw32*]: Only add windows-termcap.o to
CONFIG_OBS if not building with a curses library.
* configure: Regenerate.
* windows-termcap.c: Include defs.h. Make the whole body empty if
either one of HAVE_CURSES_H or HAVE_NCURSES_H or
HAVE_NCURSES_NCURSES_H is defined.
This patch moves safe_strerror from the gdb/{posix,mingw}-hdep.c files
to the respective common/{posix,mingw}-strerror.c files. This is a
preparation for the next patch, which shares a common code (to disable
address space randomization when creating a new inferior).
The patch has been regtested on Fedora 20 x86_64, and no regressions
were found.
gdb/ChangeLog
2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
common/posix-strerror.c.
(posix-strerror.o): New rule.
(mingw-strerror.o): Likewise.
* common/common-utils.h (safe_strerror): Move prototype to here,
from utils.h.
* common/common.host: New file.
* common/mingw-strerror.c: Likewise.
* common/posix-strerror.c: Likewise.
* configure: Regenerated.
* configure.ac: Source common/common.host. Add variable
common_host_obs to gdb_host_obs.
* contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
gdb/common/posix-strerror.c when warning about the use of
strerror.
* mingw-hdep.c (safe_strerror): Remove definition; move it to
common/mingw-strerror.c.
* posix-hdep.c (safe_strerror): Remove definition; move it to
common/posix-hdep.c.
* utils.h (safe_strerror): Remove prototype; move to
common/common-utils.h.
gdb/gdbserver/ChangeLog
2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (posix-strerror.o): New rule.
(mingw-strerror.o): Likewise.
* configure: Regenerated.
* configure.ac: Source file ../common/common.host. Initialize new
variable srv_host_obs. Add srv_host_obs to GDBSERVER_DEPFILES.
This patch is to teach both GDB and GDBServer to detect 64-bit inferior
correctly. We find a problem that GDBServer is unable to detect on a
e5500 core processor. Current GDBServer assumes that MSR is a 64-bit
register, but MSR is a 32-bit register in Book III-E. This patch is
to fix this problem by checking the right bit in MSR, in order to handle
both Book III-S and Book III-E. In order to detect Book III-S and
Book III-E, we check the PPC_FEATURE_BOOKE from the host's HWCAP (by
getauxval on glibc >= 2.16. If getauxval doesn't exist, we implement
the fallback by parsing /proc/self/auxv), because it should an invariant
on the same machine cross different processes.
In order to share code, I add nat/ppc-linux.c for both GDB and
GDBserver side.
gdb:
2015-01-14 Yao Qi <yao@codesourcery.com>
* Makefile.in (ppc-linux.o): New rule.
* config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
* configure.ac: AC_CHECK_FUNCS(getauxval).
* config.in: Re-generated.
* configure: Re-generated.
* nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
Declare.
* nat/ppc-linux.c: New file.
* ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
Call ppc64_64bit_inferior_p.
gdb/gdbserver:
2015-01-14 Yao Qi <yao@codesourcery.com>
* Makefile.in (SFILES): Add nat/ppc-linux.c.
(ppc-linux.o): New rule.
* configure.srv (powerpc*-*-linux*): Add ppc-linux.o.
* configure.ac: AC_CHECK_FUNCS(getauxval).
* config.in: Re-generated.
* configure: Re-generated.
* linux-ppc-low.c (ppc_arch_setup) [__powerpc64__]: Call
ppc64_64bit_inferior_p
On Sun, 14 Dec 2014 07:00:28 +0100, Yao Qi wrote:
The build on mingw host is broken because mingw has no mkdtemp.
../../../git/gdb/compile/compile.c: In function 'get_compile_file_tempdir':
../../../git/gdb/compile/compile.c:194:3: error: implicit declaration of function 'mkdtemp' [-Werror=implicit-function-declaration]
tempdir_name = mkdtemp (tname);
^
../../../git/gdb/compile/compile.c:194:16: error: assignment makes pointer from integer without a cast [-Werror]
tempdir_name = mkdtemp (tname);
^
cc1: all warnings being treated as errors
In the end I have managed to test it by Wine myself:
$ wine build_win32/gdb/gdb.exe -q build_win32/gdb/gdb.exe -ex start -ex 'compile code 1' -ex 'set confirm no' -ex quit
[...]
Temporary breakpoint 1, main (argc=1, argv=0x241418) at ../../gdb/gdb.c:29
29 args.argc = argc;
Could not load libcc1.so: Module not found.
Even if it managed to load libcc1.so (it needs host-dependent name libcc1.dll)
then it would soon end up at least on:
default_infcall_mmap:
error (_("This target does not support inferior memory allocation by mmap."));
As currently there is only:
linux-tdep.c:
set_gdbarch_infcall_mmap (gdbarch, linux_infcall_mmap);
While one could debug Linux targets from MS-Windows host I find it somehow
overcomplicated now when we are trying to get it running at least on native
Linux x86*.
The 'compile' project needs a larger port effort to run on MS-Windows.
gdb/ChangeLog
2014-12-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix MinGW compilation.
* compile/compile.c (get_compile_file_tempdir): Call error if
!HAVE_MKDTEMP.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac (AC_CHECK_FUNCS): Add mkdtemp.
gdb/testsuite/ChangeLog
2014-12-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix MinGW compilation.
* gdb.compile/compile-ops.exp: Update untested message if
!skip_compile_feature_tests.
* gdb.compile/compile-setjmp.exp: Likewise.
* gdb.compile/compile-tls.exp: Likewise.
* gdb.compile/compile.exp: Likewise.
* lib/gdb.exp (skip_compile_feature_tests): Check also "Command not
supported on this host".
This patch mostly aims at fixing a GDB build failure on 32bit Solaris
systems (Sparc and x86), due to a recent gnulib update adding the
readlink module. But it might also fix related issues when configuring
with --disable-largefile.
A side-effect of the gnulib readlink module addition is that it caused
largefile support to be added as well, and in particular
gnulib/import/m4/largefile.m4 introduced the following new #define in
gnulib's config.in:
| +/* Number of bits in a file offset, on hosts where this is settable. */
| +#undef _FILE_OFFSET_BITS
When defined to 64, it triggers an issue with procfs.h while trying
to build sparc-sol2-nat.c:
| #if !defined(_LP64) && _FILE_OFFSET_BITS == 64
| #error "Cannot use procfs in the large file compilation environment"
| #endif
As it turns out, this is a fairly familiar problem, and one of
the reasons behind ACX_LARGEFILE having been created. In that macro,
we have some code which disables largefile support on solaris hosts:
| sparc-*-solaris*|i[3-7]86-*-solaris*)
| changequote([,])dnl
| # On native 32bit sparc and ia32 solaris, large-file and procfs support
| # are mutually exclusive; and without procfs support, the bfd/ elf module
| # cannot provide certain routines such as elfcore_write_prpsinfo
| # or elfcore_write_prstatus. So unless the user explicitly requested
| # large-file support through the --enable-largefile switch, disable
| # large-file support in favor of procfs support.
| test "${target}" = "${host}" -a "x$plugins" = xno \
| && : ${enable_largefile="no"}
| ;;
But gnulib ignores this fact, and so tries to determine how to
enable large-file support irrespective of whether we want it or not.
This patch fixes the issue by passing --disable-largefile to gnulib's
configure when large-file support in GDB is disabled. This is done
by first enhancing ACX_CONFIGURE_DIR to allow us to pass extra
arguments to be passed to the configure command, and then by modifying
GDB's configure to pass --disable-largefile if large-file support
is disabled.
gdb/ChangeLog:
* acx_configure_dir.m4 (ACX_CONFIGURE_DIR): Add support for
new "EXTRA-ARGS" parameter.
* configure.ac: If large-file support is disabled in GDB,
pass --disable-largefile to ACX_CONFIGURE_DIR call for "gnulib".
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: If large-file support is disabled in GDBserver,
pass --disable-largefile to ACX_CONFIGURE_DIR call for "gnulib".
* configure: Regenerate.
Tested by rebuilding on sparc-solaris and x86_64-linux (with gdbserver).
This fixes the build failure on sparc-solaris. I also verified in
gnulib's config.log file that we pass --disable-largefile in the solaris
case, while we do not in the GNU/Linux case.
Since lstat gnulib module is imported, we can use it unconditionally.
lstat usage was introduced by this patch
https://sourceware.org/ml/gdb-patches/2012-01/msg00390.html
during the review, it was suggested to import gnulib lstat module, but
we didn't do that.
gdb:
2014-11-28 Yao Qi <yao@codesourcery.com>
* configure.ac (AC_CHECK_FUNCS): Remove lstat.
* config.in, configure: Regenerate.
* symfile.c (find_separate_debug_file_by_debuglink): Remove
code checking HAVE_LSTAT is defined.
Since readlink module is imported, we can use it unconditionally.
This patch is to remove configure checks and HAVE_READLINK checks in
code. It was mentioned in the patch below
[RFA/commit] gdbserver: return ENOSYS if readlink not supported.
https://sourceware.org/ml/gdb-patches/2012-02/msg00148.html
to use readlink in gdbserver, but we chose something simple at that
moment.
gdb:
2014-11-28 Yao Qi <yao@codesourcery.com>
* configure.ac (AC_CHECK_FUNCS): Remove readlink.
* config.in, configure: Re-generate.
* inf-child.c (inf_child_fileio_readlink): Don't check
HAVE_READLINK is defined.
gdb/gdbserver:
2014-11-28 Yao Qi <yao@codesourcery.com>
* configure.ac(AC_CHECK_FUNCS): Remove readlink.
* config.in, configure: Re-generate.
* hostio.c (handle_unlink): Remove code checking HAVE_READLINK
is defined.
Since gnulib alloca module was imported, we can include alloca.h in
both gdb and gdbserver unconditionally, so this patch adds inclusion
of alloca.h in common-defs.h. This patch also removes AC_FUNC_ALLOCA
in configure.ac because we don't need to check alloca any more.
This patch below is removed in fact.
[RFA/commit] include alloca.h if available.
https://www.sourceware.org/ml/gdb-patches/2010-08/msg00566.html
Since alloca.h is from gnulib now, we don't have to check malloc.h in
configure and include malloc.h in code. This patch also remove them
too.
gdb:
2014-11-21 Yao Qi <yao@codesourcery.com>
* common/common-defs.h: Include alloca.h
* configure.ac: Don't invoke AC_FUNC_ALLOCA.
* configure: Re-generated.
* defs.h: Remove code handling alloca.
* utils.c (gdb_realpath): Don't check HAVE_ALLOCA is defined
or not.
gdb/gdbserver:
2014-11-21 Yao Qi <yao@codesourcery.com>
* configure.ac: Don't invoke AC_FUNC_ALLOCA.
(AC_CHECK_HEADERS): Remove malloc.h.
* configure: Re-generated.
* config.in: Re-generated.
* server.h: Don't include alloca.h and malloc.h.
* gdbreplay.c: Don't check HAVE_ALLOCA_H is defined.
Don't include malloc.h.
This commit does most of the mechanical removal. IOW, the easy part.
procfs.c isn't touched beyond removing a couple obvious bits that are
guarded by a couple macros defined in config/alpha/nm-osf3.h. Going
beyond that for procfs.c & co would be a harder excision that
potentially affects Solaris.
Some comments in the generic alpha code ABIs that may still be
relevant and I wouldn't know what to do with them. That can always be
done on a separate pass, preferably by someone who can test on alpha.
A couple other spots have references to OSF/Tru64 and related files
being removed, but it felt like removing them would make things worse,
not better. We can revisit those when we next need to touch that
code.
I didn't remove a reference to osf in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.
Built and tested on x86_64 Fedora 20, with --enable-targets=all.
Tested that building for --target=alpha-osf3 on x86_64 Fedora 20
fails with:
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration alpha-unknown-osf3 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `build-osf'
make: *** [all] Error 2
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_64_TARGET_OBS): Remove alpha-osf1-tdep.o.
(HFILES_NO_SRCDIR): Remove config/alpha/nm-osf3.h.
(ALLDEPFILES): Remove alpha-nat.c, alpha-osf1-tdep.c and
solib-osf.c.
* NEWS: Mention that support for alpha*-*-osf* has been removed.
* ada-lang.h [__alpha__ && __osf__]
(ADA_KNOWN_RUNTIME_FILE_NAME_PATTERNS): Delete.
* alpha-nat.c, alpha-osf1-tdep.c: Delete files.
* alpha-tdep.c (alpha_gdbarch_init): Remove reference to
GDB_OSABI_OSF1.
* config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h: Delete
files.
* config/djgpp/fnchange.lst (config/alpha/alpha-osf1.mh)
(config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh): Delete.
* configure: Regenerate.
* configure.ac: Remove references to osf.
* configure.host: Handle alpha*-*-osf* in the obsolete hosts
section. Remove all other references to osf.
* configure.tgt: Add alpha*-*-osf* to the obsolete targets section.
Remove all other references to osf.
* dec-thread.c: Delete file.
* defs.h (GDB_OSABI_OSF1): Delete.
* inferior.h (START_INFERIOR_TRAPS_EXPECTED): New unconditionally
defined.
* osabi.c (gdb_osabi_names): Delete "OSF/1".
* procfs.c (procfs_debug_inferior) [PROCFS_DONT_TRACE_FAULTS]:
Delete code.
(unconditionally_kill_inferior)
[PROCFS_NEED_CLEAR_CURSIG_FOR_KILL]: Delete code.
* solib-osf.c: Delete file.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.base/callfuncs.exp: emove references to osf.
* gdb.base/sigall.exp: Likewise.
* gdb.gdb/selftest.exp: Likewise.
* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
* gdb.mi/non-stop.c: Likewise.
* gdb.mi/pthreads.c: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/sigall-reverse.exp: Likewise.
* gdb.threads/pthreads.c: Likewise.
* gdb.threads/pthreads.exp: Likewise.
gdb/doc/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Ada Tasks and Core Files): Delete mention of Tru64.
(SVR4 Process Information): Delete mention of OSF/1.
This does most of the mechanical removal. IOW, the easy part.
This doesn't touch procfs.c as that'd be a harder excision,
potentially affecting Solaris.
mips-tdep.c is left alone. E.g., I didn't delete the GDB_OSABI_IRIX
enum value, nor references to it in mips-tdep.c. Some comments
mentioning IRIX ABIs may still be relevant and I wouldn't know what to
do with them. in That can always be done on a separate pass,
preferably by someone who can test on MIPS.
I didn't remove a reference to IRIX in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.
Built and tested on x86_64 Fedora 20, with --enable-targets=all.
Tested that building for --target=mips-sgi-irix6 on x86_64 Fedora 20
fails with:
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration mips-sgi-irix6 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `/home/pedro/gdb/mygit/build-irix'
make: *** [all] Error 2
gdb/
2014-10-10 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_TARGET_OBS): Remove mips-irix-tdep.o and solib-irix.o.
(ALLDEPFILES): Remove mips-irix-tdep.c and solib-irix.c.
(HFILES_NO_SRCDIR): Remove solib-irix.h.
* NEWS: Mention that support for mips-sgi-irix5* mips-sgi-irix6*
and been removed.
* config/mips/irix5.mh, config/mips/irix6.mh: Delete files.
* configure.ac: Remove references to IRIX.
* configure.host: Add *-*-irix* to the obsolete hosts section.
Remove all other references to irix.
* irix5-nat.c, mips-irix-tdep.c, solib-irix.c, solib-irix.h:
Delete files.
gdb/testsuite/
2014-10-10 Pedro Alves <palves@redhat.com>
* gdb.base/bigcore.exp: Remove references to IRIX.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/mips_pro.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/setvar.exp: Likewise.
* lib/gdb.exp (gdb_compile_shlib): Remove mips-sgi-irix* case.
gdb/ChangeLog:
* acinclude.m4 (GDB_GUILE_PROGRAM_NAMES): Pass guile version as
last parameter to pkg-config, not first.
* configure.ac: Pass --with-guile provided pkg-config path to
GDB_GUILE_PROGRAM_NAMES.
* configure: Regenerate.
The problem here is that if a thread other than gdb's main thread
gets a SIGCHLD (it's an asynchronous signal so the kernel will
essentially pick a random thread) then gdb will hang if it is
in sigsuspend when the SIGCHLD is delivered. The other thread
will see the signal and the sigsuspend won't "wake up".
Guile and libgc should be blocking SIGCHLD in their threads,
but we need to work with Guile 2.0 and libgc 7.4.
The problem first shows up in libgc 7.4 because it is the first
release that enables multiple marker threads by default.
gdb/ChangeLog:
PR 17247
* guile.c: #include <signal.h>.
(_initialize_guile): Block SIGCHLD while initializing Guile.
Replaces the following, which is reverted.
2014-07-26 Doug Evans <xdje42@gmail.com>
PR 17185
* configure.ac: Add check for header gc/gc.h.
Add check for function setenv.
* configure: Regenerate.
* config.in: Regenerate.
* guile/guile.c (_initialize_guile): Add workaround for libgc 7.4.0.
This commit creates a new file, common/gdb_setjmp.h, to hold some
portability macros for setjmp/longjmp et al. that are used by the
exceptions subsystem and by the demangler crash catcher.
gdb/ChangeLog:
* common/gdb_setjmp.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add common/gdb_setjmp.h.
* configure.ac: Move sigsetjmp check...
* common/common.m4: ...here.
* configure: Regenerate.
* cp-support.c (SIGJMP_BUF): Delete.
(SIGSETJMP): Likewise.
(SIGLONGJMP): Likewise.
* exceptions.h (gdb_setjmp.h): Include.
(setjmp.h): Do not include.
(EXCEPTIONS_SIGJMP_BUF): Delete.
(EXCEPTIONS_SIGSETJMP): Likewise.
(EXCEPTIONS_SIGLONGJMP): Likewise.
Replace all uses of EXCEPTIONS_SIG* macros with SIG* macros
from gdb_setjmp.h.
* exceptions.c: Likewise.
gdb/gdbserver/ChangeLog:
* config.in: Regenerate.
* configure: Likewise.
Directories that don't use libtool need to add -ldl (on most *nix
hosts) to provide dlopen for libbfd.
config/
* plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to
LIBS via AC_SEARCH_LIBS.
gdb/
* acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl.
* config.in: Regenerate.
sim/ppc/
* configure.ac: Invoke AC_PLUGINS.
* config.in: Regenerate.
and regen lots of configure files.
This patch is to fix the build error when GDB is configured as:
CFLAGS=-Wall ./configure --with-babeltrace; make
This patch adds one line of code in configure test to use local
variable 'pos'.
Note that we append -Werror to CFLAGS to catch the warning related to
assignment to scope. See more in this thread
https://sourceware.org/ml/gdb-patches/2014-08/msg00045.html
2014-08-13 Yao Qi <yao@codesourcery.com>
PR build/17104
* configure.ac: Use local variable 'pos'.
* configure: Regenerated.
* acinclude.m4 (GDB_GUILE_PROGRAM_NAMES): New macro.
(GDB_GUILD_TARGET_FLAG, GDB_TRY_GUILD): New macros.
* configure.ac: Try to use guild to compile an scm file, if it fails
then disable guile support.
* configure: Regenerate.
* data-directory/Makefile.in (GUILE_SOURCE_FILES): Renamed from
GUILE_FILE_LIST.
(GUILE_COMPILED_FILES): New variable.
(GUILE_FILES) Update.
(GUILD, GUILD_TARGET_FLAG, GUILD_COMPILE_FLAGS): New variables.
(stamp-guile): Compile scm files.
* guile/guile.c (boot_guile_support): New function.
(standard_throw_args_p): New function.
(print_standard_throw_error, print_throw_error): New functions.
(handle_boot_error): New function.
(initialize_scheme_side): Rewrite to call boot_guile_support.
* guile/lib/gdb/boot.scm: Update %load-compiled-path. Load gdb.go.
* guile/lib/gdb/init.scm (%silence-compiler-warnings%): New function.
Tested with/without guile,python on amd64-linux.
I'm not sure we still have to deal with shells that can't
handle empty for lists, but I played it safe.
Otherwise this patch would be a lot smaller (though a diff -b
will still show the real changes).
PR build/17105
* configure.ac: Add AM_CONDITIONALs for HAVE_PYTHON, HAVE_GUILE.
* configure: Regenerate.
* data-directory/Makefile.in (PYTHON_FILE_LIST): Renamed from
PYTHON_FILES.
(PYTHON_FILES): New variable.
(GUILE_FILE_LIST): Renamed from GUILE_FILES.
(GUILE_FILES): New variable.
(stamp-python, install-python, uninstall-python): Handle empty
file list.
(stamp-guile, install-guile, uninstall-guile): Ditto.
PR 17185 describes a problem with using gdb+guile with libgc 7.4.0.
The symptom is a hang in sigsuspend.
[The thread referenced in the PR has the details.]
It's not clear what the right fix is, or even where the bug is yet.
This patch applies the same workaround Guile has applied.
There is no functionality or real performance loss with this,
and Guile has been using it for awhile.
* configure.ac: Add check for header gc/gc.h.
Add check for function setenv.
* configure: Regenerate.
* config.in: Regenerate.
* guile/guile.c (_initialize_guile): Add workaround for libgc 7.4.0.
This commit wraps calls to the demangler with a segmentation fault
handler. The first time a segmentation fault is caught a core file
is generated and the user is prompted to file a bug and offered the
choice to exit or to continue their GDB session. A maintainence
option is provided to allow the user to disable the crash handler
if required.
gdb/
2014-06-19 Gary Benson <gbenson@redhat.com>
* configure.ac [AC_CHECK_FUNCS] <sigaltstack>: New check.
* configure: Regenerate.
* config.in: Likewise.
* main.c (signal.h): New include.
(setup_alternate_signal_stack): New function.
(captured_main): Call the above.
* cp-support.c (signal.h): New include.
(catch_demangler_crashes): New flag.
(SIGJMP_BUF): New define.
(SIGSETJMP): Likewise.
(SIGLONGJMP): Likewise.
(gdb_demangle_jmp_buf): New static global.
(gdb_demangle_attempt_core_dump): Likewise.
(gdb_demangle_signal_handler): New function.
(gdb_demangle): If catch_demangler_crashes is set, install the
above signal handler before calling bfd_demangle, and restore
the original signal handler afterwards. Display the offending
symbol and call demangler_warning the first time a segmentation
fault is caught.
(_initialize_cp_support): New maint set/show command.
gdb/doc/
2014-06-19 Gary Benson <gbenson@redhat.com>
* gdb.texinfo (Maintenance Commands): Document new
"maint set/show catch-demangler-crashes" option.
The goal of this patch is to provide an easy way to make
--disable-werror the default when building binutils, or the parts
of binutils that need to get built when building GDB. In development
mode, we want to continue making -Werror the default with GCC.
But, when making releases, I think we want to make it as easy as
possible for regular users to successfully build from sources.
GDB already has this kind of feature to turn -Werror as well as
the use of the libmcheck library. As GDB Release Manager, I take
advantage of it to turn those off after having cut the branch.
I'd like to be able to do the same for the binutils bits. And
perhaps Tristan will want to do the same for his releases too
(not sure, binutils builders might be a little savvier than GDB
builders).
This patch introduces a new file, called development.sh, which
just sets a variable called $development. In our development branches
(Eg. "master"), it's set to true. But setting it to false would allow
us to change the default behavior of various development-related
features to be turned off; in this case, it turns off the use of
-Werror by default (use --enable-werror to turn it back on).
bfd/ChangeLog:
* development.sh: New file.
* warning.m4 (AM_BINUTILS_WARNINGS): Source bfd/development.sh.
Make -Werror the default with GCC only if DEVELOPMENT is true.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
$(srcdir)/development.sh.
* Makefile.in, configure: Regenerate.
binutils/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gas/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gold/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): New.
* Makefile.in, configure: Regenerate.
gprof/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
ld/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
opcodes/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gdb/ChangeLog:
* development.sh: Delete.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure.ac: Adjust development.sh source call.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: Adjust development.sh source call.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure: Regenerate.
Tested on x86_64-linux by building two ways: One with DEVELOPMENT
set to true, and one with DEVELOPMENT set to false. In the first
case, I could see the use of -Werror, while it disappeared in
the second case.
gdb/
2014-06-01 Ludovic Courtès <ludo@gnu.org>
* configure.ac: When Guile is available, check for the
availability of 'scm_new_smob'.
* configure, config.h.in: Regenerate.
* guile/guile-internal.h (scm_new_smob) [!HAVE_SCM_NEW_SMOB]: New
function.
* configure.ac: Don't crash if pkg-config is not found and guile
wasn't explicitly requested. Use AC_MSG_ERROR instead of AC_ERROR
in guile checks.
* configure: Regenerate.
* configure.ac (libpython checking): Remove all but python.o from
CONFIG_OBS. Remove all but python.c from CONFIG_SRCS.
* configure: Regenerate.
* Makefile.in (SFILES): Add extension.c.
(HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
(COMMON_OBS): Add extension.o.
* extension.h: New file.
* extension-priv.h: New file.
* extension.c: New file.
* python/python-internal.h: #include "extension.h".
(gdbpy_auto_load_enabled): Declare.
(gdbpy_apply_val_pretty_printer): Declare.
(gdbpy_apply_frame_filter): Declare.
(gdbpy_preserve_values): Declare.
(gdbpy_breakpoint_cond_says_stop): Declare.
(gdbpy_breakpoint_has_cond): Declare.
(void source_python_script_for_objfile): Delete.
* python/python.c: #include "extension-priv.h".
Delete inclusion of "observer.h".
(extension_language_python): Moved here and renamed from
script_language_python in py-auto-load.c.
Redefined to be of type extension_language_defn.
(python_extension_script_ops): New global.
(python_extension_ops): New global.
(struct python_env): New member previous_active.
(restore_python_env): Call restore_active_ext_lang.
(ensure_python_env): Call set_active_ext_lang.
(gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
New arg extlang.
(gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
New arg extlang.
(gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
New arg extlang.
(gdbpy_eval_from_control_command): Renamed from
eval_python_from_control_command, made static. New arg extlang.
(gdbpy_source_script) Renamed from source_python_script, made static.
New arg extlang.
(gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change
result to int. New arg extlang.
(gdbpy_source_objfile_script): Renamed from
source_python_script_for_objfile, made static. New arg extlang.
(gdbpy_start_type_printers): Renamed from start_type_printers, made
static. New args extlang, extlang_printers. Change result type to
"void".
(gdbpy_apply_type_printers): Renamed from apply_type_printers, made
static. New arg extlang. Rename arg printers to extlang_printers
and change type to ext_lang_type_printers *.
(gdbpy_free_type_printers): Renamed from free_type_printers, made
static. Replace argument arg with extlang, extlang_printers.
(!HAVE_PYTHON, eval_python_from_control_command): Delete.
(!HAVE_PYTHON, source_python_script): Delete.
(!HAVE_PYTHON, gdbpy_should_stop): Delete.
(!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
(!HAVE_PYTHON, start_type_printers): Delete.
(!HAVE_PYTHON, apply_type_printers): Delete.
(!HAVE_PYTHON, free_type_printers): Delete.
(_initialize_python): Delete call to observer_attach_before_prompt.
(finalize_python): Set/restore active extension language.
(gdbpy_finish_initialization) Renamed from
finish_python_initialization, made static. New arg extlang.
(gdbpy_initialized): New function.
* python/python.h: #include "extension.h". Delete #include
"value.h", "mi/mi-cmds.h".
(extension_language_python): Declare.
(GDBPY_AUTO_FILE_NAME): Delete.
(enum py_bt_status): Moved to extension.h and renamed to
ext_lang_bt_status.
(enum frame_filter_flags): Moved to extension.h.
(enum py_frame_args): Moved to extension.h and renamed to
ext_lang_frame_args.
(finish_python_initialization): Delete.
(eval_python_from_control_command): Delete.
(source_python_script): Delete.
(apply_val_pretty_printer): Delete.
(apply_frame_filter): Delete.
(preserve_python_values): Delete.
(gdbpy_script_language_defn): Delete.
(gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
(start_type_printers, apply_type_printers, free_type_printers): Delete.
* auto-load.c: #include "extension.h".
(GDB_AUTO_FILE_NAME): Delete.
(auto_load_gdb_scripts_enabled): Make public. New arg extlang.
(script_language_gdb): Delete, moved to extension.c and renamed to
extension_language_gdb.
(source_gdb_script_for_objfile): Delete.
(auto_load_pspace_info): New member unsupported_script_warning_printed.
(loaded_script): Change type of language member to
struct extension_language_defn *.
(init_loaded_scripts_info): Initialize
unsupported_script_warning_printed.
(maybe_add_script): Make static. Change type of language arg to
struct extension_language_defn *.
(clear_section_scripts): Reset unsupported_script_warning_printed.
(auto_load_objfile_script_1): Rewrite to use extension language API.
(auto_load_objfile_script): Make public. Remove support-compiled-in
and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
(source_section_scripts): Rewrite to use extension language API.
(load_auto_scripts_for_objfile): Rewrite to use
auto_load_scripts_for_objfile.
(collect_matching_scripts_data): Change type of language member to
struct extension_language_defn *.
(auto_load_info_scripts): Change type of language arg to
struct extension_language_defn *.
(unsupported_script_warning_print): New function.
(script_not_found_warning_print): Make static.
(_initialize_auto_load): Rewrite construction of scripts-directory
help.
* auto-load.h (struct objfile): Add forward decl.
(struct script_language): Delete.
(struct auto_load_pspace_info): Add forward decl.
(struct extension_language_defn): Add forward decl.
(maybe_add_script): Delete.
(auto_load_objfile_script): Declare.
(script_not_found_warning_print): Delete.
(auto_load_info_scripts): Update prototype.
(auto_load_gdb_scripts_enabled): Declare.
* python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
auto_load_python_scripts_enabled and made public.
(script_language_python): Delete, moved to python.c.
(gdbpy_script_language_defn): Delete.
(info_auto_load_python_scripts): Update to use
extension_language_python.
* breakpoint.c (condition_command): Replace call to
gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
(bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
with call to breakpoint_ext_lang_cond_says_stop.
* python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
from gdbpy_should_stop. Change result type to enum scr_bp_stop.
New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
(gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
New arg slang.
(local_setattro): Print name of extension language with existing
stop condition.
* valprint.c (val_print, value_print): Update to call
apply_ext_lang_val_pretty_printer.
* cp-valprint.c (cp_print_value): Update call to
apply_ext_lang_val_pretty_printer.
* python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_apply_val_pretty_printer): Renamed from
apply_val_pretty_printer. New arg extlang.
(!HAVE_PYTHON, apply_val_pretty_printer): Delete.
* cli/cli-cmds.c (source_script_from_stream): Rewrite to use
extension language API.
* cli/cli-script.c (execute_control_command): Update to call
eval_ext_lang_from_control_command.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
enum ext_lang_bt_status values. Update call to
apply_ext_lang_frame_filter.
(mi_cmd_stack_list_locals): Ditto.
(mi_cmd_stack_list_args): Ditto.
(mi_cmd_stack_list_variables): Ditto.
* mi/mi-main.c: Delete #include "python/python-internal.h".
Add #include "extension.h".
(mi_cmd_list_features): Replace reference to python internal variable
gdb_python_initialized with call to ext_lang_initialized_p.
* stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
Update to use enum ext_lang_frame_args. Update to call
apply_ext_lang_frame_filter.
* python/py-framefilter.c (extract_sym): Update to use enum
ext_lang_bt_status.
(extract_value, py_print_type, py_print_value): Ditto.
(py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
(py_mi_print_variables, py_print_locals, py_print_args): Ditto.
(py_print_frame): Ditto.
(gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
New arg extlang. Update to use enum ext_lang_bt_status.
* top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
finish_python_initialization. Replace with call to
finish_ext_lang_initialization.
* typeprint.c (do_free_global_table): Update to call
free_ext_lang_type_printers.
(create_global_typedef_table): Update to call
start_ext_lang_type_printers.
(find_global_typedef): Update to call apply_ext_lang_type_printers.
* typeprint.h (struct ext_lang_type_printers): Add forward decl.
(type_print_options): Change type of global_printers from "void *"
to "struct ext_lang_type_printers *".
* value.c (preserve_values): Update to call preserve_ext_lang_values.
* python/py-value.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_preserve_values): Renamed from preserve_python_values.
New arg extlang.
(!HAVE_PYTHON, preserve_python_values): Delete.
* utils.c (quit_flag): Delete, moved to extension.c.
(clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
extension.c.
* eval.c: Delete #include "python/python.h".
* main.c: Delete #include "python/python.h".
* defs.h: Update comment.
testsuite/
* gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected
output.
* gdb.gdb/python-interrupts.exp: New file.
gdb/
* configure.ac: Call AM_PROG_INSTALL_STRIP.
* configure: Regenerate.
* aclocal.m4: Regenerate.
* Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
New substituted variables.
(install-strip): New target.
(INSTALL_SCRIPT): New substituted variable.
(FLAGS_TO_PASS): Add it.
(install-only): Use $(INSTALL_SCRIPT) rather than
$(INSTALL_PROGRAM) for gcore.
Avoid false positives if the search pattern "lose" is found in path
descriptions in comments generated by the preprocessor.
See <https://sourceware.org/bugzilla/show_bug.cgi?id=16152>.
gdb/
2013-11-27 Steffen Sledz <sledz@dresearch-fe.de>
* configure.ac: Tighten Cygwin detection check.
* configure: Rebuild.
configure doesn't check for sys/types.h any more, but it still tries
to use the result of the check. This removes that use as well.
2013-11-18 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* configure.ac: Remove check of HAVE_SYS_TYPES_H.
We don't use the result of checking for unistd.h, so this removes the
check.
2013-11-18 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* configure.ac: Don't check for unistd.h.
stdlib.h is universal as well, so there is no need to check for it.
2013-11-18 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* configure.ac: Don't check for stdlib.h
* defs.h: Include stdlib.h unconditionally.
2013-11-18 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* configure.ac: Don't check for stdlib.h.
* gdbreplay.c: Unconditionally include stdlib.h.
gdb already unconditionally includes stddef.h in many places.
I think there is no reason to check for its existence.
Also, Zack Weinberg's header file survey agrees:
http://hacks.owlfolio.org/header-survey/
This patch removes the configure check and the inclusion guards.
It also removes a redundant inclusion that I noticed in defs.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* config.in: Rebuild.
* configure: Rebuild.
* configure.ac: Don't check for stddef.h.
* defs.h: Unconditionally include stddef.h. Remove duplicate
inclusion.
This removes gdb_dirent.h and updates the code to use dirent.h
instead. It also removes the now-useless configure checks.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/common.m4 (GDB_AC_COMMON): Don't use AC_HEADER_DIRENT.
* common/gdb_dirent.h: Remove.
* common/filestuff.c: Use dirent.h.
* common/linux-osdata.c: Use dirent.h.
(NAMELEN): Define.
* config.in: Rebuild.
* configure: Rebuild.
* configure.ac: Don't use AC_HEADER_DIRENT.
* linux-fork.c: Use dirent.h
* linux-nat.c: Use dirent.h.
* nto-procfs.c: Use dirent.h.
* procfs.c: Use dirent.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* config.in: Rebuild.
* configure: Rebuild.
* configure.ac: Don't use AC_HEADER_DIRENT.
Now that we are using the gnulib string.h module, we don't need to
check for string.h or strings.h. This removes the last few checks
from the source and from the configure scripts.
2013-11-18 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* common/common.m4 (GDB_AC_COMMON): Don't check for string.h or
strings.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* server.h: Don't check HAVE_STRING_H.
* gdbreplay.c: Don't check HAVE_STRING_H.
* configure: Rebuild.
An earlier patch removed the check for "syscall" since the results
were not used in the C code. However, the result was used, via the
cache variable, elsewhere in configure.
This patch fixes the problem by checking for "syscall" at the point at
which HAVE_TKILL_SYSCALL is defined.
2013-11-11 Tom Tromey <tromey@redhat.com>
* config.in, configure: Rebuild.
* configure.ac (HAVE_TKILL_SYSCALL): Check for "syscall".
Now that the configury needed for the "common" and "target"
directories is in common.m4, some code in gdb's configure.ac is
redundant.
I ran this script after making an "ID" file using mkid:
sed -n 's/^.*\(HAVE_[A-Z0-9_]*\).*$/\1/p' config.in |
while read x; do
echo ===== $x
gid $x | egrep -v '^(testsuite|gnulib|common|target|gdbserver)/'
done
This finds all the spots using HAVE_ defines, and, more importantly,
makes it clear which defines aren't used in the main parts of gdb.
From this I came up with this patch to remove all the unused bits.
There are a few that are subtly used -- for example the configure
script sometimes checks internal configure cache variables, meaning
some checks cannot be removed.
2013-11-08 Tom Tromey <tromey@redhat.com>
* configure, config.in: Rebuild.
* configure.ac: Remove unused configury.
The removal of solib-sunos.c also removed the last user of various
macros defined by configure.
This patch removes the corresponding configure code.
2013-11-08 Tom Tromey <tromey@redhat.com>
* configure, config.in: Rebuild.
* configure.ac: Remove all link.h-related checks.
It has bothered me for a while that files in common/ use macros
defined via autoconf checks, but rely on each configure.ac doing the
proper checks independently.
This patch introduces common/common.m4 which consolidates the checks
assumed by code in common.
The rule I propose is that if something is needed or used by common,
it should be checked for by common.m4. However, if the check is also
needed by gdb or gdbserver, then it should be duplicated there.
Built and regtested on x86-64 Fedora 18 (though this is hardly the
most strenuous case) and using the Fedora 18 mingw cross compilers. I
also examined the config.in diffs to ensure that symbols did not go
missing.
2013-11-08 Tom Tromey <tromey@redhat.com>
* acinclude.m4: Include common.m4.
* common/common.m4: New file.
* configure, config.in: Rebuild.
* configure.ac: Use GDB_AC_COMMON.
2013-11-08 Tom Tromey <tromey@redhat.com>
* acinclude.m4: Include common.m4, codeset.m4.
* configure, config.in: Rebuild.
* configure.ac: Use GDB_AC_COMMON.
Ulrich Weigand <uweigand@de.ibm.com>
* gdb_ptrace.h: Use ptrace64 instead of ptrace if HAVE_PTRACE64
is defined.
* rs6000-nat.c: Check for __ld_info64_ if compiling 64 BIT gdb.
(rs6000_ptrace32): Call ptrace64 instead of ptrace if present.
(rs6000_ptrace64): Call ptace64 instead of ptracex if present.
* configure.ac: Check for ptrace64.
* configure, config.in: Regenerate.
This factors --enable-libmcheck related bits from GDB's configure.ac
and makes GDBserver use them too. Specifically, the 'development'
global is moved to a separate script to it can be sourced by both GDB
and GDBserver, and the --enable-libmcheck/--disable-libmcheck bits
proper are moved to a new m4 file.
I started out by defining 'development' in the m4 file, but in the end
decided against it, as a separate script has the advantage that
changing it in release branches does not require regenerating
configure, unlike today.
I had also started out by making the new GDB_AC_LIBMCHECK itself
handle the yes/no default fallback depending on release/developement,
but since I had split out 'development' to a separate script, and, GDB
needs the python checks anyway (hence we'd need to do the python
checks in gdb's configure.ac, and pass in a 'default lmcheck yes/no'
parameter to GDB_AC_LIBMCHECK anyway), I ended up keeping
GDB_AC_LIBMCHECK isolated from the 'development' global. IOW, it's
the caller's business to handle it.
Tested on x86_64 Fedora 17. Built GDB and GDBserver with and without
--enable-libmcheck, and observed --enable-libmcheck overrides the
disablement of -lmcheck caused by python supporting threads, and that
GDBserver links with -lmcheck when expected. Also observed that
changing the 'development' global, and issuing "make" triggers a
relink, and '-lmcheck' is included or not from the link accordingly.
gdb/
2013-07-03 Pedro Alves <palves@redhat.com>
* Makefile.in (config.status): Depend on development.sh.
(aclocal_m4_deps): Add libmcheck.m4.
* acinclude.m4: Include libmcheck.m4.
* configure.ac: Source development.sh instead of setting
'development' here. --enable-libmcheck/--disable-libmcheck code
factored out to GDB_AC_LIBMCHECK. Run it.
* development.sh: New file.
* libmcheck.m4: New file.
* configure: Regenerate.
gdb/gdbserver/
2013-07-03 Pedro Alves <palves@redhat.com>
* Makefile.in (config.status): Depend on development.sh.
* acinclude.m4: Include libmcheck.m4.
* configure: Regenerate.
This adds -Wold-style-definition to gdb's list of warnings. This
found a couple of spots where "()" was used where "(void)" is more
correct.
Tested by rebuilding on x86-64 Fedora 18.
* configure.ac (build_warnings): Add -Wold-style-definition.
* configure: Rebuild.
* machoread.c (_initialize_machoread): Use "(void)".
* macrocmd.c (macro_inform_no_debuginfo): Fix formatting;
use "(void)".
This adds -Wold-style-declaration to gdb's list of warnings.
It turns out that a few places use "const static" rather than
"static const". The former is deprecated according to the C standard.
Tested by rebuilding with --enable-targets=all on x86-64 Fedora 18.
* configure.ac (build_warnings): Add -Wold-style-declaration.
* configure: Rebuild.
* dsrec.c (make_srec): Use "static const", not "const static".
* h8300-tdep.c (h8300_breakpoint_from_pc): Use "static const",
not "const static".
* mi/mi-parse.c (mi_no_values, mi_simple_values, mi_all_values):
Use "static const", not "const static".
* mn10300-tdep.c (mn10300_breakpoint_from_pc): Use "static const",
not "const static".
* moxie-tdep.c (moxie_breakpoint_from_pc): Use "static const",
not "const static".
* rs6000-tdep.c (rs6000_breakpoint_from_pc): Use "static const",
not "const static".
* v850-tdep.c (v850_breakpoint_from_pc): Use "static const",
not "const static".
(v850_dbtrap_breakpoint_from_pc): Likewise.
* xstormy16-tdep.c (xstormy16_breakpoint_from_pc): Use "static const",
not "const static".
This adds -Wmissing-parameter-type to gdb's list of warnings.
This one doesn't happen to trigger for a --enable-targets=all build on
x86-64 Fedora 18.
* configure.ac (build_warnings): Add -Wmissing-parameter-type.
* configure: Rebuild.
This simplifies the .gdbinit filename selection logic.
We have a GDBINIT_FILENAME define that supposedly configurations would
override, but none do so. Instead, the only configuration that wants
a different file name instead of ".gdbinit", djgpp, does a strcpy over
the gdbinit global array. This means the array needs to be sized, and
the code that does that is doing the usual
'PATH_MAX/FILENAME_MAX/fallback constant/etc.' mess.
Instead of all that, it's much simpler to have configure specificy the
.gdbinit filename. As bonus, we can then make the "gdbinit" global
array const.
gdb/
2013-07-01 Pedro Alves <palves@redhat.com>
* configure.ac (GDBINIT): Define, depending on host.
* go32-nat.c (init_go32_ops): Don't override gdbinit here.
* top.c (PATH_MAX): Delete fallback definition.
(GDBINIT_FILENAME): Delete.
(gdbinit): Reimplement as const char array set to the GDBINIT
string constant.
* top.h (gdbinit): Make const.
Building gdb with --host=i586-pc-msdosdjgpp ends up with:
i586-pc-msdosdjgpp-gcc -g -O2 -I../../src/gdb/config/djgpp -I. -I../../src/gdb -I../../src/gdb/common -I../../src/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../src/gdb/../include/opcode -I../../src/gdb/../opcodes/.. -I../../src/gdb/../readline/.. -I../bfd -I../../src/gdb/../bfd -I../../src/gdb/../include -I../libdecnumber -I../../src/gdb/../libdecnumber -I./../intl -I../../src/gdb/gnulib/import -Ibuild-gnulib/import -Wall -Wdeclaration-after-statement -Wpointer-arith -Wformat-nonliteral -Wpointer-sign -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wmissing-prototypes -Wdeclaration-after-statement -Wempty-body -Werror -c -o filestuff.o -MT filestuff.o -MMD -MP -MF .deps/filestuff.Tpo ../../src/gdb/common/filestuff.c
../../src/gdb/common/filestuff.c:38:24: fatal error: sys/socket.h: No such file or directory
There are no sockets on djgpp. This #ifdef's out the bits in the file
that use sockets, depending on whether winsock or sys/socket.h is
available.
As alternative approach, given ser-tcp.c, ser-pipe.c, etc. are split
into separate files, and which to use is selected by configure.ac:
dnl Figure out which of the many generic ser-*.c files the _host_ supports.
SER_HARDWIRE="ser-base.o ser-unix.o ser-pipe.o ser-tcp.o"
case ${host} in
*go32* ) SER_HARDWIRE=ser-go32.o ;;
*djgpp* ) SER_HARDWIRE=ser-go32.o ;;
*mingw32*) SER_HARDWIRE="ser-base.o ser-tcp.o ser-mingw.o" ;;
esac
AC_SUBST(SER_HARDWIRE)
... I considered splitting filestuff.c similarly. But I quickly gave
up on the idea, as it looked like a lot more complication over this
approach, for no real gain. Plus, there are uses of these functions
outside the ser*.c framework.
gdbserver's configure.ac is already checking for sys/socket.h.
gdb/
2013-05-23 Pedro Alves <palves@redhat.com>
* common/filestuff.c [USE_WIN32API]: Define HAVE_SOCKETS.
[HAVE_SYS_SOCKET_H]: Define HAVE_SOCKETS.
(socket_mark_cloexec, gdb_socketpair_cloexec, gdb_socket_cloexec):
Only define if HAVE_SOCKETS is defined.
* configure.ac: Check for sys/socket.h.
* config.in, configure: Regenerate.
