Since 2006, commit d270463e9, _bfd_elf_copy_private_section_data has
copied over SHF_MASKOS and SHF_MASKPROC flags. That makes the buggy
code in sh_elf64_copy_private_data_internal redundant.
bfd/
PR 17755
* elf64-sh64.c (sh_elf64_copy_private_data_internal): Delete code
copying SHF_SH5_ISA32.
binutils/testsuite/
* binutils-all/strip-11.d: New test.
* binutils-all/objcopy.exp: Run it.
Non-EABI ARM targets set OSABI to ARM regardless of whether or not GNU
features have been used which causes this test to fail.
binutils/testsuite/ChangeLog:
2014-07-10 Will Newton <will.newton@linaro.org>
* binutils-all/objcopy.exp: Disable the strip-10 test on
non-EABI ARM configurations.
the bfdtest1 and bfdtest2 executables will fail because they are not installed.
Since the programs only exist to be used by the testsuite it does not make sense
to install them, so instead I have chosen to create a patch which skips the tests
when they are not present.
* binutils-all/ar.exp: Skip tests involving bfdtest1 and bfdtest2
if these executables are not present.
thought that an uncompressed .debug_str section was compressed.
* compress.c (bfd_is_section_compressed): When checking the
.debug_str section, also check the fifth byte in the section is
not part of a string.
* binutils-all/debug_str.s: New test.
* binutils-all/debug_str.d: New test control file.
* binutils-all/compress.exp: Run debug_str test.
ELFOSABI_GNU for binaries containing unique symbols. So I am reverting that patch and
instead applying the patch below to fix up the targets that were triggering the test failure.
bfd/ChangeLog
2014-01-29 Nick Clifton <nickc@redhat.com>
* elf32-metag.c (elf_metag_post_process_headers): Call
_bfd_elf_post_process_headers.
* elf32-sh64.c (sh64_elf_copy_private_data): Call
_bfd_elf_copy_private_data.
* elf64-sh64.c (sh_elf64_copy_private_data_internal): Likewise.
binutils/testsuite/ChangeLog
2014-01-29 Nick Clifton <nickc@redhat.com>
* binutils-all/strip-10.d: Revert previous delta.
ELF headers will be copied from input files. This in turn has broken
the strip-10 test in the binutils testsuite, so this patch updates the
expected output.
PR binutils/16318
* binutils-all/strip-10.d: Allow "System V" in the osabi field.
It is a good pratice to set the SHF_INFO_LINK bit when the sh_info field
represents a section header index.
bfd/
PR binutils/16317
* elf.c (assign_section_numbers): Set the SHF_INFO_LINK bit for
SHT_REL/SHT_RELA sections when setting the sh_info field.
binutils/testsuite/
PR binutils/16317
* binutils-all/readelf.s: Updated.
* binutils-all/readelf.s-64: Likewise.
ld/testsuite/
PR binutils/16317
* ld-elf/linkinfo1.s: New file.
* ld-elf/linkinfo1a.d: Likewise.
* ld-elf/linkinfo1b.d: Likewise.
These files are source files and have no business being +x. We couldn't
easily fix it in CVS (you need login+write access to the raw rcs files),
but we can fix this w/git.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
an entry in a .rsrc section.
(pe_print_resource_directory): New function: Displays a directory
in a .rsrc section.
(pe_print_rsrc): New function: Displays the contents of .rsrc
section.
(_bfd_XX_print_private_bfd_data_common): Call pe_print_rsrc.
* binutils-all/windres/windres.exp: Run for x86_64-pc-cygwin.
Add test of "objump -p" output.
2013-11-27 Matthew Fortune <matthew.fortune@imgtec.com>
* binutils-all/objcopy.exp: Consider mips-mti-elf the same as
mips-sde-elf
* binutils-all/readelf.exp: Likewise
gas/testsuite/
2013-11-27 Matthew Fortune <matthew.fortune@imgtec.com>
* gas/mips/mips.exp: Consider mips-mti-elf the same as mips-sde-elf
ld/testsuite/
2013-11-27 Matthew Fortune <matthew.fortune@imgtec.com>
* ld-mips-elf/mips-elf.exp: Consider mips-mti-elf the same as
mips-sde-elf
I think HJ has already fixed the binutils and ld tests with his
2013-09-27 readelf change, but this allows them to pass with wider
address output as per Nick's 2013-09-12 readelf change.
binutils/testsuite/
* binutils-all/x86-64/compressed-1a.d: Allow wide display of addresses.
gas/testsuite/
* gas/cfi/cfi-x86_64.d: Match when lacking end of section padding.
ld/testsuite/
* ld-pe/cfi.d: Allow wide display of addresses.
2013-08-19 Tristan Gingold <gingold@adacore.com>
* nm.c (print_size_symbols): Directly get symbol size.
binutils/testsuite/
2013-08-19 Tristan Gingold <gingold@adacore.com>
* binutils-all/nm.exp: Add a test for nm --size-sort
* binutils-all/nm-elf-1.s: New file.
* binutils-all/nm-1.s: New file.
* config.bfd (msp430): Define targ_selvecs.
* configure.in: Add bfd_elf32_msp430_ti_vec.
* cpu-msp430.c: Add some more MSP430 machine numbers.
* elf32-msp430.c Add support for MSP430X relocations.
Add support for TI compiler generated relocations.
Add support for sym_diff relocations.
Add support for relaxing out of range short branches into long
branches.
Add support for MSP430 attribute section.
* reloc.c: Add MSP430X relocations.
* targets.c: Add bfd_elf32_msp430_ti_vec.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* readelf.c: Add support for MSP430X architecture.
* readelf.exp: Expect -wi test to fail for the MSP430.
* config/tc-msp430.c: Add support for the MSP430X architecture.
Add code to insert a NOP instruction after any instruction that
might change the interrupt state.
Add support for the LARGE memory model.
Add code to initialise the .MSP430.attributes section.
* config/tc-msp430.h: Add support for the MSP430X architecture.
* doc/c-msp430.texi: Document the new -mL and -mN command line
options.
* NEWS: Mention support for the MSP430X architecture.
* gas/all/gas.exp: Skip the DIFF1 test for the MSP430.
Expect the FORWARD test to pass for the MSP430.
Skip the REDEF tests for the MSP430.
Expect the 930509A test to fail for the MSP430.
* gas/all/sleb128-4.d: Skip for the MSP430.
* gas/elf/elf.exp: Set target_machine to msp430 for the MSP430.
Skip the EHOPT0 test for the MSP430.
Skip the REDEF and EQU-RELOC tests for the MSP430.
* gas/elf/section2.e-msp430: New file.
* gas/lns/lns-big-delta.d: Remove expectation of 20-bit
addresses.
* gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430.
* gas/msp430/msp430x.s: New test.
* gas/msp430/msp430x.d: Expected disassembly.
* gas/msp430/msp430.exp: Run new test.
* gas/msp430/opcode.d: Update expected disassembly.
* msp430.h: Add MSP430X relocs.
Add some more MSP430 machine numbers.
Add values used by .MSP430.attributes section.
* msp430.h: Add patterns for MSP430X instructions.
* Makefile.am: Add emsp430X.c
* Makefine.in: Regenerate.
* configure.tgt (msp430): Add msp430X emulation.
* ldmain.c (multiple_definition): Only disable relaxation if it
was enabled by the user.
* ldmain.h (RELAXATION_ENABLED_BY_USER): New macro.
* emulparams/msp430all.sh: Add support for MSP430X.
* emultempl/generic.em: (before_parse): Enable relaxation for the
MSP430.
* scripttempl/msp430.sc: Reorganize sections. Add .rodata
section.
* scripttempl/msp430_3.sc: Likewise.
* NEWS: Mention support for MSP430X.
* ld-elf/flags1.d: Expect this test to pass on the MSP430.
* ld-elf/init-fini-arrays.d: Expect this test to fail on the
MSP430.
* ld-elf/merge.d: Expect this test to pass on the MSP430.
* ld-elf/sec64k.exp: Skip these tests for the MSP430.
* ld-gc/pr13683.d: Expect this test to fail on the MSP430.
* ld-srec/srec.exp: Expect these tests to fail on the MSP430.
* ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to
fail on the MSP430.
* msp430-dis.c: Add support for MSP430X instructions.
* config.bfd: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
binutils/testsuite/
* lib/binutils-common.exp (is_elf_format): Also exclude
*-*-linux*ecoff*.
gas/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
ld/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*. Update the `sed' pattern used to convert
from alpha*-*-linux-* to alpha*-*-linux*ecoff*.
* binutils-all/readelf.n: Updare expected output from readelf.
* readelf.c (process_corefile_note_segment): Prevent attempts to
read beyond the end of the note buffer.
* mips-dis.c (is_compressed_mode_p): Only match symbols from the
section disassembled.
binutils/testsuite/
* binutils-all/mips/mixed-micromips.d: New test.
* binutils-all/mips/mixed-mips16.d: New test.
* binutils-all/mips/mixed-micromips.s: New test source.
* binutils-all/mips/mixed-mips16.s: New test source.
* binutils-all/mips/mips.exp: New file.
* lib/binutils-common.exp (is_zlib_supported): New function.
* lib/utils-lib.exp (run_dump_test): If as options include
--compress-debug-sections and zlib is not available, report
the test as unsupported.
* binutils-all/compress.exp: Bail out if zlib is not available.
* binutils-all/objdump.exp (objdump compressed debug):
Mark unsupported if zlib is not available.
* binutils-all/readelf.exp (readelf_compressed_wa_test): Likewise.
gas/testsuite/
* lib/gas-defs.exp (run_dump_test): If as options include
--compress-debug-sections and zlib is not available, report
the test as unsupported.
ld/testsuite/
* ld-elf/compress.exp: Bail out if zlib is not supported.
* lib/ld-lib.exp (run_dump_test): If as options include
--compress-debug-sections and zlib is not available, report
the test as unsupported.
* binutils-all/ar.exp (long_filenames): Remove extra verbose
before binutils_run.
(thin_archive): Likewise.
(thin_archive_with_nested): Likewise. Also run bfdtest1 on
$archive2.
