The common code has a sim_core_trans_addr() helper that only the m32r code
uses. Move the inline extern in the m32r code to the proper common header.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Similar to logic in the cris exp, attempt a simple compile and if it fails
(presumably due to the compiler being broken), skip all the related tests.
Fortunately, most tests (~600 out of ~800) are pure assembly, so people should
still get pretty good coverage.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Before POSIX standardized strsignal(), old systems would hide the
prototype unless the normal extension defines were enabled. So use
the AC_USE_SYSTEM_EXTENSIONS helper for that.
Then make sure we include string.h ourselves in nrun.c rather than
relying on implicit includes via other sim headers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The sim code gets the logic for SIM_AC_OPTION_WARNINGS from gdb, but
it hasn't been updated in a good long while. Sync with the latest
gdb code.
There is a sim specific change in here: we disable -Werror for now.
This is because all sim code atm contains warnings. Will probably
have to slowly add a white list of targets which can tolerate this
until everyone is updated.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The current se_all*opcodes tests are very similar in how they work.
In preparation for adding more tests along these lines, unify the
common bits into a framework that others can include and build off
of easily.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
From: Robin Getz <robin.getz@analog.com>
Overflow with shift operations happens independently of saturation, but
we have the logic merged. Extend the lshift function so that callers
can tell it when to handle each independently, and then do so when it's
needed.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This isn't entirely correct in that it assumes the signal numbering of
the target and host match, but seeing as we already make that assumption
in a few places, this patch doesn't make the situation any worse.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
To make it easier to support ebiu banks at other addresses, move the base to
a runtime parameter rather than structure. Future work will make this more
dynamic, but I'm waiting for more details first.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The 32bit allopcodes test had quite a bit of optimization added to it
so that it ran in a reasonable amount of time out of uncached memory.
Port those changes over to the 16bit test so the two share common code.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
AIX 7.1 defines st_pad[123] to st_[amc]tim.tv_pad, respectively,
breaking declaration of st_pad[123] members in struct solaris_stat.
Undefine them as this is no less terrible than other solutions (like
renaming the fields and losing the binding to Solaris' names).
From: Michael Haubenwallner <haubi@s01en24.gentoo.org>
We had some workarounds for old linux/mii.h headers, but it breaks with
newer ones. So tweak the checks a bit to work with newer ones. We'll
worry about older systems once someone complains.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Trying to run `headers` in an out-of-tree build fails atm due to the
relative srcdir paths being used in a location other than where they
were setup to be used from. Get abs_srcdir from configure and use
that instead where applicable.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The current erc32 configure script only searches for -ltermcap to provide
any termcap funcs (which readlines needs). When building against a local
readline (which is static), we hit link failures like so:
gcc ...-I/-D flags... -o sis \
sis.o exec.o erc32.o func.o help.o float.o \
../../bfd/libbfd.a ../../opcodes/libopcodes.a \
../../libiberty/libiberty.a -lz -lnsl \
../../readline/libreadline.a -lm
../../readline/libreadline.a(display.o): In function 'cr':
.../readline/display.c:2486: undefined reference to 'tputs'
collect2: ld returned 1 exit status
make[2]: *** [sis] Error 1
Use AC_SEARCH_LIBS from gdb's configure.ac as suggested by Joel Brobecker
to check for additional termcap providers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The cr16 libgloss port does not define these syscall numbers, so trying
to use them results in build failures [1]. The cr16 code already uses
ifdefs around a bunch of syscalls, so extend that style to cover the
ones that are currently missing. Now we can at least compile.
[1] http://sourceware.org/ml/gdb-patches/2011-06/msg00118.html
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Building the sim on a sparc-solaris 2.8 machine fails when configured
with no extra sim hardware:
> for hw in ; do \
> echo "extern const struct hw_descriptor
> dv_${hw}_descriptor[];" ; \
> done >> tmp-hw.h
> echo 'const char version[] = "'"`sed q
> /[...]/../../gdb/version.in`"'";'
> >> version.c-tmp
> /bin/sh: -c: line 1: syntax error near unexpected token `;'
> /bin/sh: -c: line 1: `for hw in ; do \'
> make[3]: *** [hw-config.h] Error 2
The same thing happens with the version of bash that we got from
Sun as well (which is very old: 2.03.0(1)-release).
The problems comes from the fact that both shells are buggy, and
reject the following script:
for hw in ; do
[...]
done
The above is what sim/common/Makefile.in tries to execute when
generating hw-config.h.
In order to allow users to build out of the box on these machines,
this patch works around this bug. It does rely on the fact that
none of the tokens in SIM_HW contain whitespaces.
sim/common/ChangeLog:
* Make-common.in (hw-config.h): Work around bug in Solaris 2.8
system bourne shell.
Parsing target addresses is hard if not generally useless, so use the new
cb_get_string function to lookup the associated strings as well. Now the
trace output is quickly useful instead of just marginally so.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The common sim code provides a useful "get_string" function which reads
a C string out of the target's memory space. So rename and export it
for other people to use.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Lift the code that GDB is using to generate dependencies on the fly and
port it over to the sim. Now people shouldn't have to manually maintain
these in their Makefile's.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Some systems (like OS X) do not have posix_fallocate. Add a configure
check for it before we try to use it. This is less work than trying
to support old systems.
URL: http://sourceware.org/bugzilla/show_bug.cgi?id=13161
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Automake likes to dump macros automatically used into the aclocal.m4
file, but the common/aclocal.m4 naming prevents that. So rename it
to the more normal "acinclude.m4" so the aclocal tool can work.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Now that the sourceware tree generally requires autoconf-2.64, update
the sim tree to require that too.
This allows us to drop the long standing SIM_AC_COMMON/common.m4
workaround as autoconf 2.64+ seems to work for me.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The dv-cfi code uses the bool type but doesn't include the stdbool.h
header. I didn't notice for Blackfin targets as the core Blackfin
header will include stdbool.h, but most targets don't do this.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The "devices.h" header is Blackfin-specific, so trying to build dv-cfi
for any other target fails. Include the specific hw headers this file
needs directly.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Seems some fixes were added to the common.m4 file but not the
SIM_AC_COMMON macro. Keep the two in sync since they're supposed
to be the same thing.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The VIT_MAX insns can be used in parallel, so we need to use the store
buffer so we don't clobber the output register before we get a chance
to do a memory store with it.
Reported-by: Kai Iskratsch <kai@stella.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The sim_args_command prototype is in sim-options.h, so pull it in
directly rather than assuming a common header does it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Shell code before AC_INIT will be silently culled, and since the common
aclocal.m4 includes inline shell code, the file cannot be included before
AC_INIT. So update the example to show people including the file after
that rather than before to avoid random breakage.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The autoconf guys point out that our usage of AC_PROG_CC in the
SIM_AC_COMMON does not jive with their intended use.
http://www.gnu.org/software/autoconf/manual/autoconf.html#Expanded-Before-Required
So utilize AC_REQUIRE to make the warnings go away and generate
the correct code with different autoconf versions.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The sim dir has 30 configure.ac files and 2 configure.in files.
So rename the minority to be consistent.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* gen.c (insn_field_cmp): Tweak comment about neither field
being an insn_field_string with a cond_eq-to-value condition.
(insns_bit_useless) <case insn_field_string, case
decode_find_mixed>: Handle cond_eq-to-value fields as
insn_field_int.
* gen-idecode.c (print_idecode_validate): Handle
insn_field_string cond-equal-to-value fields as insn_field_int.
* gen-icache.c (print_icache_body): Add comment why constant
string fields are handled.
Since sim_do_command for many people simply calls sim_args_command, start
a unified version of it. For people who handle their own options, they
could switch to this by using sim_add_option_table instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The stat syscalls cannot work without a stat map, so declare one that
matches libgloss for virtual environments.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* iwmmxt.c (WCMPGT): Sign extend 32-bit values before performing a
signed compare.
(WMAC): Extend computed result before adding to result register.
(WRSA): Sign extend 32-bit values before shifting.
Now that the Blackfin libgloss code extracts the 2nd result and the
error code from the R1/R2 registers, have the sim fill them up.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The LSHIFT/ASHIFT insns that work with accumulators lacked AV/AVS
handling in the ASTAT register, so add it to match the hardware.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
If we're shifting accumulators, we don't want to touch the V bit in
ASTAT, so add size checks to the ashiftrt/lshiftrt helpers.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The logical shift insn does not sign extend before shifting, so
we shouldn't either.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This too should have been squashed into an earlier change. It covers
a few more cases in the V/VS saturation patch when working with TFU
and FU modes of dsp insns.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
When the shift magnitude exceeds 32 bits, the values rotate around (since
the hardware is actually a barrel shifter). So handle this edge case,
update the corresponding AV bit in ASTAT which was missing previously,
and tweak the AZ setting based on how the hardware behaves.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The shift magnitude is a 5-bit signed value. When it is between 0 and
15, then we do the requested shift, but when it is outside of that, we
have to do the opposite.
That means we flip between lshift and ashiftrt to match the hardware.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This reverts the previous commit and does it right. This change got
lost in the shuffle of patches I have pending.
Basically the logic is to change the 32bit saturation (and then masked
to 16bits) to a proper 16bit saturation.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Some saturation cases with dsp mac insns were not setting the V flag.
So implement that part and split up the logic between the dual macs.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Our handling of the M_IU/M_TFU modes are missing signed saturation when
the MM flag is set, so add it to match the hardware behavior.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
After testing the hardware with all the different dsp flags, the MM flag
triggers sign extension in all modes. So drop the limited use of it, and
the local custom helper that was also extending unsigned values. We also
can see that the flag checks in the mult/mac insns have the same behavior
with sign extending, so add a helper func to keep the logic the same in
both places.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
When using the IH modifier, we need to first saturate the value before
rounding it, and then further saturate it a bit more. This makes the
sim match the hardware behavior with these insns.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
When the accumulator saturates, it needs to be greater than, but not
equal to, the largest unsigned value as this is what the hardware does.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Fixes an error reported by Tristan and which can be evidenced by
doing:
% powerpc-elf-gdb
(gdb) target sim --sysroot=var
Invalid option: --sysroot=/var
[...]
sim/ppc/ChangeLog:
* psim.c (psim_options): Fix length of comparison when checking
for --sysroot= option.
This patch improves the error message when an invalid option is
detected, by also printing the option that actually caused the error.
For instance, from GDB:
(gdb) target sim --hello
Invalid option: --hello
Usage:
[...]
We also added the usage after an invalid long-name option (Eg: --hello)
to be in line with what's being done for all other invalid options
being detected.
sim/ppc/ChangeLog:
* psim.c (psim_options): Add option that cause the error
in invalid-option error messages. Print the usage when
detecting an invalid long-name option.
There was a recent change that cuased the "target sim" command
to add a --sysroot option to the argument vector passed down to
the simulator. This caused a failure in the powerpc simulator,
as it did not recognize it. This patch fixes the problem by adding
support for the --sysroot option (it ignores it).
sim/ppc/ChangeLog:
* psim.c (psim_options): Accept and ignore `--sysroot=...'.
Now that the common sim testsuite code supports .S and .c files, we
can import the Blackfin testsuite. There are about ~800 tests here,
so I'm only attaching a compressed patch of them. Other than adding
files to sim/testsuite/sim/bfin/, the sim/configure.tgt file was
updated to mark Blackfin as having a testsuite, and sim/configure
regenerated.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The BF537 family glues a bunch of peripherals into single interrupt lines
that run into the SIC. To model this same behavior in the sim, we need to
use the glue-or device, and in order to use that, we need to tweak things
a bit in the mach code to allow declaring of these new devices.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The machs.c file is the best place for holding cpu-specific details, so
restructure the way the SIC manages its ports to do just that. Now the
SIC's have a standard set of input pins and the different line routing
from peripherals is kept in the device tree only. This better models
the hardware where the SIC doesn't care about the exact peripheral that
is sending it stuff, just which input pin it gets it on.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This patch fixes a build failure at link time due to
sim_complete_command being undefined. There was a recent change
that added this function to all the ports that do not use the
common/ subdir. But somehow, the erc32 port got missed.
sim/erc32/ChangeLog:
* interf.c (sim_complete_command): New stub function.
