tui_initialize_io contains a pair of hardwired fprintf/exit error
handlers. I was unable to find any documentation as to why they're
hardwired (the code appeared in a monolithic block back in 2001:
https://sourceware.org/ml/gdb-patches/2001-07/msg00490.html) and I
was also unable to come up with a situation where error would not
be suitable, so I have replaced both handlers with calls to error.
gdb/ChangeLog:
* tui/tui-io.c (tui_initialize_io): Replace two fprintf/exit
pairs with calls to error. Wrap the message with _().
The TUI terminal state becomes corrupted (e.g. key sequences such as
Alt_F and Alt_B no longer work) when one attaches to an inferior process
(via "run" or "attach") from within TUI. This terminal corruption
remains until you switch out of TUI mode.
This happens because the terminal state is not properly saved when
switching to and out from TUI mode. Although the functions tui_enable()
and tui_disable() both call the function target_terminal_save_ours() to
save the terminal state, this function is a no-op unless GDB has already
attached to an inferior process. This is because only the "native"
target has a useful implementation of target_terminal_save_ours()
(namely child_terminal_save_ours()) and we only have the "native" target
in our target vector if GDB has already attached to an inferior process.
So without an inferior process, switching to and from TUI mode does not
actually save the terminal state. Therefore when you attach to an
inferior process from within TUI mode, the proper terminal state is not
restored (after swapping from the inferior's terminal back to the GDB
terminal).
To fix this we just have to ensure that the terminal state is always
being properly saved when switching from and to TUI mode. To achieve
this, this patch removes the polymorphic function
target_terminal_save_ours() and replaces it with a regular function
gdb_save_tty_state() that always saves the terminal state.
Tested on x86_64-unknown-linux-gnu by running "make check", no new
regressions.
gdb/ChangeLog:
* target.h (struct target_ops::to_terminal_save_ours): Remove
declaration.
(target_terminal_save_ours): Remove macro.
* target-delegates.c: Regenerate.
* inf-child.c (inf_child_target): Don't set the nonexistent
field to_terminal_save_ours.
* inferior.h (child_terminal_save_ours): Remove declaration.
* terminal.h (gdb_save_tty_state): New declaration.
* inflow.c (child_terminal_save_ours): Rename to ...
(gdb_save_tty_state): ... this.
* tui/tui.c: Include terminal.h.
(tui_enable): Use gdb_save_tty_state instead of
target_terminal_save_ours.
(tui_disable): Likewise.
The TUI currently crashes when the user types <return> in response to
a pagination prompt:
$ gdb --tui ...
*the TUI is now active*
(gdb) set height 2
(gdb) help
List of classes of commands:
Program received signal SIGSEGV, Segmentation fault.
strlen () at ../sysdeps/x86_64/strlen.S:106
106 movdqu (%rax), %xmm12
(top-gdb) bt
#0 strlen () at ../sysdeps/x86_64/strlen.S:106
#1 0x000000000086be5f in xstrdup (s=0x0) at ../src/libiberty/xstrdup.c:33
#2 0x00000000005163f9 in tui_prep_terminal (notused1=1) at ../src/gdb/tui/tui-io.c:296
#3 0x000000000077a7ee in _rl_callback_newline () at ../src/readline/callback.c:82
#4 0x000000000077a853 in rl_callback_handler_install (prompt=0x0, linefunc=0x618b60 <command_line_handler>) at ../src/readline/callback.c:102
#5 0x0000000000718a5c in gdb_readline_wrapper_cleanup (arg=0xfd14d0) at ../src/gdb/top.c:788
#6 0x0000000000596d08 in do_my_cleanups (pmy_chain=0xcf0b38 <cleanup_chain>, old_chain=0x1043d10) at ../src/gdb/cleanups.c:155
#7 0x0000000000596d75 in do_cleanups (old_chain=0x1043d10) at ../src/gdb/cleanups.c:177
#8 0x0000000000718bd9 in gdb_readline_wrapper (prompt=0x7fffffffcfa0 "---Type <return> to continue, or q <return> to quit---")
at ../src/gdb/top.c:835
#9 0x000000000071cf74 in prompt_for_continue () at ../src/gdb/utils.c:1894
#10 0x000000000071d434 in fputs_maybe_filtered (linebuffer=0x1043db0 "List of classes of commands:\n\n", stream=0xf72e20, filter=1)
at ../src/gdb/utils.c:2111
#11 0x000000000071da0f in vfprintf_maybe_filtered (stream=0xf72e20, format=0x89aef8 "List of classes of %scommands:\n\n", args=0x7fffffffd118, filter=1)
at ../src/gdb/utils.c:2339
#12 0x000000000071da4a in vfprintf_filtered (stream=0xf72e20, format=0x89aef8 "List of classes of %scommands:\n\n", args=0x7fffffffd118)
at ../src/gdb/utils.c:2347
#13 0x000000000071dc72 in fprintf_filtered (stream=0xf72e20, format=0x89aef8 "List of classes of %scommands:\n\n") at ../src/gdb/utils.c:2399
#14 0x00000000004f90ab in help_list (list=0xe6d100, cmdtype=0x89ad8c "", class=all_classes, stream=0xf72e20)
at ../src/gdb/cli/cli-decode.c:1038
#15 0x00000000004f8dba in help_cmd (arg=0x0, stream=0xf72e20) at ../src/gdb/cli/cli-decode.c:946
Git 0017922 added:
@@ -776,6 +777,12 @@ gdb_readline_wrapper_cleanup (void *arg)
gdb_assert (input_handler == gdb_readline_wrapper_line);
input_handler = cleanup->handler_orig;
+
+ /* Reinstall INPUT_HANDLER in readline, without displaying a
+ prompt. */
+ if (async_command_editing_p)
+ rl_callback_handler_install (NULL, input_handler);
and tui_prep_terminal simply misses handling the case of a NULL
rl_prompt.
I also checked that readline's sources do similar checks.
gdb/
2014-07-24 Pedro Alves <palves@redhat.com>
* tui/tui-io.c (tui_prep_terminal): Handle NULL rl_prompt.
I have filed now:
--with-system-readline uses bundled readline include files
https://sourceware.org/bugzilla/show_bug.cgi?id=17077
To see any effect of the patch below you have to do:
rm -rf readline
Otherwise readline include files get used the bundled ones from GDB which are
currently 6.2 while system readline may be 6.3 already.
You also have to use system readline-6.3 including its upstream patch:
[Bug-readline] Readline-6.3 Official Patch 5
http://lists.gnu.org/archive/html/bug-readline/2014-04/msg00018.html
Message-ID: <140415125618.AA57598.SM@caleb.ins.cwru.edu>
In short it happens on Fedora Rawhide since:
readline-6.3-1.fc21
https://koji.fedoraproject.org/koji/buildinfo?buildID=538941
The error is:
../../gdb/tui/tui-io.c:132:1: error: 'Function' is deprecated [-Werror=deprecated-declarations]
static Function *tui_old_rl_getc_function;
^
../../gdb/tui/tui-io.c:133:1: error: 'VFunction' is deprecated [-Werror=deprecated-declarations]
static VFunction *tui_old_rl_redisplay_function;
^
../../gdb/tui/tui-io.c:134:1: error: 'VFunction' is deprecated [-Werror=deprecated-declarations]
static VFunction *tui_old_rl_prep_terminal;
^
../../gdb/tui/tui-io.c:135:1: error: 'VFunction' is deprecated [-Werror=deprecated-declarations]
static VFunction *tui_old_rl_deprep_terminal;
^
It is since bash change:
lib/readline/rltypedefs.h
- remove old Function/VFunction/CPFunction/CPPFunction typedefs as
suggested by Tom Tromey <tromey@redhat.com>
The new typedefs used below are present in readline/rltypedefs.h since:
git://git.savannah.gnu.org/bash.git
commit 28ef6c316f1aff914bb95ac09787a3c83c1815fd
Date: Fri Apr 6 19:14:31 2001 +0000
gdb/
2014-06-20 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix --with-system-readline with readline-6.3 patch 5.
* tui/tui-io.c (tui_old_rl_getc_function, tui_old_rl_redisplay_function)
(tui_old_rl_prep_terminal, tui_old_rl_deprep_terminal): Use rl_*_t
types.
Message-ID: <20140620105004.GA22236@host2.jankratochvil.net>
Currently there are many calls to help_list that pass the constant -1
as the "class" value. However, the parameter is declared as being of
type enum command_class, and uses of the constant violate this
abstraction.
This patch fixes the error everywhere it occurs in the gdb sources.
Tested by rebuilding.
2014-06-13 Tom Tromey <tromey@redhat.com>
* cp-support.c (maint_cplus_command): Pass all_commands, not -1,
to help_list.
* guile/guile.c (info_guile_command): Pass all_commands, not -1,
to help_list.
* tui/tui-win.c (tui_command): Pass all_commands, not -1, to
help_list.
* tui/tui-regs.c (tui_reg_command): Pass all_commands, not -1, to
help_list.Pass all_commands, not -1, to help_list.
* cli/cli-dump.c (dump_command, append_command)
(srec_dump_command, ihex_dump_command, tekhex_dump_command)
(binary_dump_command, binary_append_command): Pass all_commands,
not -1, to help_list.
* cli/cli-cmds.c (info_command, set_debug): Pass all_commands, not
-1, to help_list.
* valprint.c (set_print, set_print_raw): Pass all_commands, not
-1, to help_list.
* typeprint.c (set_print_type): Pass all_commands, not -1, to
help_list.
* top.c (set_history): Pass all_commands, not -1, to help_list.
* target-descriptions.c (set_tdesc_cmd, unset_tdesc_cmd): Pass
all_commands, not -1, to help_list.
* symfile.c (overlay_command): Pass all_commands, not -1, to
help_list.
* spu-tdep.c (info_spu_command): Pass all_commands, not -1, to
help_list.
* serial.c (serial_set_cmd): Pass all_commands, not -1, to
help_list.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Pass all_commands, not
-1, to help_list.
* remote.c (remote_command, set_remote_cmd): Pass all_commands,
not -1, to help_list.
* ravenscar-thread.c (set_ravenscar_command): Pass all_commands,
not -1, to help_list.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_print_command, maintenance_set_cmd): Pass
all_commands, not -1, to help_list.
* macrocmd.c (macro_command): Pass all_commands, not -1, to
help_list.
* language.c (set_check): Pass all_commands, not -1, to help_list.
* infcmd.c (unset_command): Pass all_commands, not -1, to
help_list.
* frame.c (set_backtrace_cmd): Pass all_commands, not -1, to
help_list.
* dwarf2read.c (set_dwarf2_cmd): Pass all_commands, not -1, to
help_list.
* dcache.c (set_dcache_command): Pass all_commands, not -1, to
help_list.
* breakpoint.c (save_command): Pass all_commands, not -1, to
help_list.
* ada-lang.c (maint_set_ada_cmd, set_ada_command): Pass
all_commands, not -1, to help_list.
Enabling target-async by default will require implementing sync
execution on top of an async target, much like foreground command are
implemented on the CLI in async mode.
In order to do that, we will need better control of when to print the
MI prompt. Currently the interp->display_prompt_p hook is all we
have, and MI just always returns false, meaning, make
display_gdb_prompt a no-op. We'll need to be able to know to print
the MI prompt in some of the conditions that display_gdb_prompt is
called from the core, but not all.
This is all a litte twisted currently. As we can see,
display_gdb_prompt is really CLI specific, so make the console
interpreters (console/tui) themselves call it. To be able to do that,
and add a few different observers that the interpreters can use to
distinguish when or why the the prompt is being printed:
#1 - one called whenever a command is cancelled due to an error.
#2 - another for when a foreground command just finished.
In both cases, CLI wants to print the prompt, while MI doesn't.
MI will want to print the prompt in the second case when in a special
MI mode.
The display_gdb_prompt call in interp_set made me pause. The comment
there reads:
/* Finally, put up the new prompt to show that we are indeed here.
Also, display_gdb_prompt for the console does some readline magic
which is needed for the console interpreter, at least... */
But, that looks very much like a no-op to me currently:
- the MI interpreter always return false in the prompt hook, meaning
actually display no prompt.
- the interpreter used at that point is still quiet. And the
console/tui interpreters return false in the prompt hook if they're
quiet, meaning actually display no prompt.
The only remaining possible use would then be the readline magic. But
whatever that might have been, it's not reacheable today either,
because display_gdb_prompt returns early, before touching readline if
the interpreter returns false in the display_prompt_p hook.
Tested on x86_64 Fedora 20, sync and async modes.
gdb/
2014-05-29 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_interpreter_display_prompt_p): Delete.
(_initialize_cli_interp): Adjust.
* event-loop.c: Include "observer.h".
(start_event_loop): Notify 'command_error' observers instead of
calling display_gdb_prompt. Remove FIXME comment.
* event-top.c (display_gdb_prompt): Remove call into the
interpreters.
* inf-loop.c: Include "observer.h".
(inferior_event_handler): Notify 'command_error' observers instead
of calling display_gdb_prompt.
* infrun.c (fetch_inferior_event): Notify 'sync_execution_done'
observers instead of calling display_gdb_prompt.
* interps.c (interp_set): Don't call display_gdb_prompt.
(current_interp_display_prompt_p): Delete.
* interps.h (interp_prompt_p): Delete declaration.
(interp_prompt_p_ftype): Delete.
(struct interp_procs) <prompt_proc_p>: Delete field.
(current_interp_display_prompt_p): Delete declaration.
* mi-interp.c (mi_interpreter_prompt_p): Delete.
(_initialize_mi_interp): Adjust.
* tui-interp.c (tui_init): Install 'sync_execution_done' and
'command_error' observers.
(tui_on_sync_execution_done, tui_on_command_error): New
functions.
(tui_display_prompt_p): Delete.
(_initialize_tui_interp): Adjust.
gdb/doc/
2014-05-29 Pedro Alves <palves@redhat.com>
* observer.texi (sync_execution_done, command_error): New
subjects.
Ignoring expected and desired differences like whether the prompt is
output after *stoppped records, GDB MI output is still different in
sync and async modes.
In sync mode, when a CLI execution command is entered, the "reason"
field is missing in the *stopped async record. And in async mode, for
some events, like program exits, the corresponding CLI output is
missing in the CLI channel.
Vis, diff between sync vs async modes:
run
^running
*running,thread-id="1"
(gdb)
...
- ~"[Inferior 1 (process 15882) exited normally]\n"
=thread-exited,id="1",group-id="i1"
=thread-group-exited,id="i1",exit-code="0"
- *stopped
+ *stopped,reason="exited-normally"
si
...
(gdb)
~"0x000000000045e033\t29\t memset (&args, 0, sizeof args);\n"
- *stopped,frame=...,thread-id="1",stopped-threads="all",core="0"
+ *stopped,reason="end-stepping-range",frame=...,thread-id="1",stopped-threads="all",core="0"
(gdb)
In addition, in both cases, when a MI execution command is entered,
and a breakpoint triggers, the event is sent to the console too. But
some events like program exits have the CLI output missing in the CLI
channel:
-exec-run
^running
*running,thread-id="1"
(gdb)
...
=thread-exited,id="1",group-id="i1"
=thread-group-exited,id="i1",exit-code="0"
- *stopped
+ *stopped,reason="exited-normally"
We'll want to make background commands always possible by default.
IOW, make target-async be the default. But, in order to do that,
we'll need to emulate MI sync on top of an async target. That means
we'll have yet another combination to care for in the testsuite.
Rather than making the testsuite cope with all these differences, I
thought it better to just fix GDB to always have the complete output,
no matter whether it's in sync or async mode.
This is all related to interpreter-exec, and the corresponding uiout
switching. (Typing a CLI command directly in MI is shorthand for
running it through -interpreter-exec console.)
In sync mode, when a CLI command is active, normal_stop is called when
the current interpreter and uiout are CLI's. So print_XXX_reason
prints the stop reason to CLI uiout (only), and we don't show it in
MI.
In async mode the stop event is processed when we're back in the MI
interpreter, so the stop reason is printed directly to the MI uiout.
Fix this by making run control event printing roughly independent of
whatever is the current interpreter or uiout. That is, move these
prints to interpreter observers, that know whether to print or be
quiet, and if printing, which uiout to print to. In the case of the
console/tui interpreters, only print if the top interpreter. For MI,
always print.
Breakpoint hits / normal stops are already handled similarly -- MI has
a normal_stop observer that prints the event to both MI and the CLI,
though that could be cleaned up further in the direction of this
patch.
This also makes all of:
(gdb) foo
and
(gdb) interpreter-exec MI "-exec-foo"
and
(gdb)
-exec-foo
and
(gdb)
-interpreter-exec console "foo"
print as expected.
Tested on x86_64 Fedora 20, sync and async modes.
gdb/
2014-05-29 Pedro Alves <palves@redhat.com>
PR gdb/13860
* cli/cli-interp.c: Include infrun.h and observer.h.
(cli_uiout, cli_interp): New globals.
(cli_on_signal_received, cli_on_end_stepping_range)
(cli_on_signal_exited, cli_on_exited, cli_on_no_history): New
functions.
(cli_interpreter_init): Install them as 'end_stepping_range',
'signal_received' 'signal_exited', 'exited' and 'no_history'
observers.
(_initialize_cli_interp): Remove cli_interp local.
* infrun.c (handle_inferior_event): Call the several stop reason
observers instead of printing the stop reason directly.
(end_stepping_range): New function.
(print_end_stepping_range_reason, print_signal_exited_reason)
(print_exited_reason, print_signal_received_reason)
(print_no_history_reason): Make static, and add an uiout
parameter. Print to that instead of to CURRENT_UIOUT.
* infrun.h (print_end_stepping_range_reason)
(print_signal_exited_reason, print_exited_reason)
(print_signal_received_reason print_no_history_reason): New
declarations.
* mi/mi-common.h (struct mi_interp): Rename 'uiout' field to
'mi_uiout'.
<cli_uiout>: New field.
* mi/mi-interp.c (mi_interpreter_init): Adjust. Create the new
uiout for CLI output. Install 'signal_received',
'end_stepping_range', 'signal_exited', 'exited' and 'no_history'
observers.
(find_mi_interpreter, mi_interp_data, mi_on_signal_received)
(mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited)
(mi_on_no_history): New functions.
(ui_out_free_cleanup): Delete function.
(mi_on_normal_stop): Don't allocate a new uiout for CLI output,
instead use the one already stored in the MI interpreter data.
(mi_ui_out): Adjust.
* tui/tui-interp.c: Include infrun.h and observer.h.
(tui_interp): New global.
(tui_on_signal_received, tui_on_end_stepping_range)
(tui_on_signal_exited, tui_on_exited)
(tui_on_no_history): New functions.
(tui_init): Install them as 'end_stepping_range',
'signal_received' 'signal_exited', 'exited' and 'no_history'
observers.
(_initialize_tui_interp): Delete tui_interp local.
gdb/doc/
2014-05-29 Pedro Alves <palves@redhat.com>
PR gdb/13860
* observer.texi (signal_received, end_stepping_range)
(signal_exited, exited, no_history): New observer subjects.
gdb/testsuite/
2014-05-29 Pedro Alves <palves@redhat.com>
PR gdb/13860
* gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop
reason, even in sync mode.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
https://sourceware.org/ml/gdb-patches/2013-09/msg00179.html
gdb/ChangeLog
* cli/cli-interp.c (_initialize_cli_interp): Add a
command_loop_proc to interp_procs.
* event-top.c (cli_command_loop): Change signature to match
interp_command_loop_ftype.
* event-top.h (cli_command_loop): Same.
* interps.c (interp_new): Require every interpreter to have a
command_loop_proc.
(current_interp_command_loop): Just call the command_loop_proc on
the current interpreter.
* tui/tui-interp.c (_initialize_tui_interp): Add a
command_loop_proc to interp_procs.
I stumbled on the TUI's register-changed decision code before (used to
decided whether the register should be highlighted in the register
window), for it is trying to compare all the different possible states
and contents or previous/current register contents, and as such may
need updating whenever the value machinery changes to have more state.
It's just much simpler and more future proof to compare the
previous/current printable representation instead.
The bit in tui_register_format that returns early if the register has
no name gets a bit in the way of the new prototype (what to return in
that case? NULL, empty string, etc.?). Fortunately, that check isn't
really necessary. All the callers will have already skipped unnamed
registers.
gdb/
2013-09-05 Pedro Alves <palves@redhat.com>
* tui/tui-regs.c (tui_register_format): Don't look at the
register's name here. Return string representing register
value instead of storing it in the data element.
(tui_get_register): Compare register string representations
instead of register value states and contents.
I've stumbled on this by inspection.
When the TUI's register window is first displayed, it always shows the
registers of the current frame, instead of of the selected frame,
which is obviously bogus.
E.g.,
(gdb) step # into "function"
(gdb) up
(gdb) tui reg general # or C-x 2, C-x 2
shows the registers of "function", rather than the caller's.
A subsequent:
(gdb) frame
or
(gdb) down
(gdb) up
can be used as workaround to "fix" it.
gdb/
2013-09-05 Pedro Alves <palves@redhat.com>
PR tui/15933
* tui/tui-regs.c (tui_show_registers): Show registers of the
selected frame, not the current frame.
PR tui/14880 shows a reproducer that triggers this assertion:
int
value_available_contents_eq (const struct value *val1, int offset1,
const struct value *val2, int offset2,
int length)
{
int idx1 = 0, idx2 = 0;
/* This routine is used by printing routines, where we should
already have read the value. Note that we only know whether a
value chunk is available if we've tried to read it. */
gdb_assert (!val1->lazy && !val2->lazy);
(top-gdb) bt
#0 internal_error (file=0x88a26c "../../src/gdb/value.c", line=549, string=0x88a220 "%s: Assertion `%s' failed.") at ../../src/gdb/utils.c:844
#1 0x000000000057b9cd in value_available_contents_eq (val1=0x10fa900, offset1=0, val2=0x10f9e10, offset2=0, length=8) at ../../src/gdb/value.c:549
#2 0x00000000004fd756 in tui_get_register (frame=0xd5c430, data=0x109a548, regnum=0, changedp=0x109a560) at ../../src/gdb/tui/tui-regs.c:736
#3 0x00000000004fd111 in tui_check_register_values (frame=0xd5c430) at ../../src/gdb/tui/tui-regs.c:521
#4 0x0000000000501884 in tui_check_data_values (frame=0xd5c430) at ../../src/gdb/tui/tui-windata.c:234
#5 0x00000000004f976f in tui_selected_frame_level_changed_hook (level=1) at ../../src/gdb/tui/tui-hooks.c:222
#6 0x00000000006f0681 in select_frame (fi=0xd5c430) at ../../src/gdb/frame.c:1490
#7 0x00000000005dd94b in up_silently_base (count_exp=0x0) at ../../src/gdb/stack.c:2268
#8 0x00000000005dd985 in up_command (count_exp=0x0, from_tty=1) at ../../src/gdb/stack.c:2280
#9 0x00000000004dc5cf in do_cfunc (c=0xd3f720, args=0x0, from_tty=1) at ../../src/gdb/cli/cli-decode.c:113
#10 0x00000000004df664 in cmd_func (cmd=0xd3f720, args=0x0, from_tty=1) at ../../src/gdb/cli/cli-decode.c:1888
#11 0x00000000006e43e1 in execute_command (p=0xc7e6c2 "", from_tty=1) at ../../src/gdb/top.c:489
The fix is to fetch the value before comparing the contents. The
comment additions to value.h explain why it can't be
value_available_contents_eq itself that fetches the contents.
Tested on x86_64 Fedora 17.
gdb/
2013-06-28 Pedro Alves <palves@redhat.com>
PR tui/14880
* tui/tui-regs.c (tui_get_register): Fetch register value contents
before checking whether they're available.
* value.c (value_available_contents_eq): Change comment.
* value.h (value_available_contents_eq): Expand comment.
* source.c (print_source_lines_base): Print for TUI also "fullname".
* tui/tui-data.c (init_content_element): Change tui_locator_element
field to full_name.
* tui/tui-data.h (struct tui_locator_element): Likewise.
* tui/tui-disasm.c (tui_show_disassem_and_update_source): Rename
tui_update_locator_filename calls to tui_update_locator_fullname.
Replace symtab->filename refererence by symtab_to_fullname call.
* tui/tui-out.c (tui_field_string): Check for "fullname" now.
* tui/tui-source.c (tui_set_source_content): Change tui_locator_element
field to full_name. Replace symtab->filename refererence by
symtab_to_fullname call.
(tui_show_symtab_source): Rename parameter to fullname. Change
tui_locator_element field to full_name.
* tui/tui-stack.c: Include source.h.
(tui_set_locator_filename): Rename the declaration to ...
(tui_set_locator_fullname): ... here. Rename its parameter to
fullname, updates its comment.
(tui_set_locator_info): Rename its parameter to fullname.
(tui_set_locator_filename): Rename the definition to ...
(tui_set_locator_fullname): ... here. Rename its parameter to
fullname, updates its comment. Change tui_locator_element field to
full_name.
(tui_set_locator_info): Rename its parameter to fullname.
(tui_set_locator_info): Rename callee to tui_set_locator_fullname.
(tui_update_locator_filename): Rename to ...
(tui_update_locator_fullname): ... here. Rename callee to
tui_set_locator_fullname.
(tui_show_frame_info): Replace symtab->filename refererence by
symtab_to_fullname call.
* tui/tui-stack.h (tui_update_locator_filename): Rename to ...
(tui_update_locator_fullname): ... here.
* tui/tui-winsource.c (tui_display_main): Rename the callee to
tui_update_locator_fullname. Replace symtab->filename refererence by
symtab_to_fullname call.
* tui/tui.c (tui_show_source): Rename its parameter to fullname.
Rename the callee to tui_update_locator_fullname.
* tui/tui.h (tui_show_source): Rename its parameter to fullname.
* ada-lang.c (user_select_syms): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
* breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
(clear_command): New variable sal_fullname, initialize it. Replace
compare_filenames_for_search by filename_cmp with sal_fullname.
(say_where, update_static_tracepoint): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
* cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
Likewise.
* dwarf2read.c: Include source.h.
(fixup_go_packaging): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* linespec.c (add_sal_to_sals): Rename variable filename to fullname.
Replace symtab->filename refererences by symtab_to_filename_for_display
calls.
(create_sals_line_offset, convert_linespec_to_sals): New variable
fullname, initialize it, replace symtab->filename reference by the
variable.
* linux-fork.c: Include source.h.
(info_checkpoints_command): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* macroscope.c (sal_macro_scope): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
* mdebugread.c: Include source.h.
(psymtab_to_symtab_1): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
(mi_cmd_file_list_exec_source_files): Likewise.
* printcmd.c: Include source.h.
(build_address_symbolic): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* psymtab.c (partial_map_symtabs_matching_filename)
(read_psymtabs_with_fullname): Call compare_filenames_for_search also
with psymtab_to_fullname.
* python/py-symtab.c (stpy_str): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
(stpy_get_filename): New variable filename, initialize it, use instead
of symtab->filename refererences.
(salpy_str): Make variable filename const char *. Replace
symtab->filename refererences by symtab_to_filename_for_display calls.
* skip.c: Include source.h and filenames.h.
(skip_file_command): Remove const from the symtab variable. Replace
symtab->filename refererences by symtab_to_fullname call.
(function_name_is_marked_for_skip): New variables searched_for_fullname
and fullname. Use them to search also with symtab's fullname.
* source.c (find_source_lines): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
(print_source_lines_base): New variable filename, use it instead of
symtab->filename. Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
(line_info, forward_search_command): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
(reverse_search_command): Replace symtab->filename refererences by
symtab_to_filename_for_display calls. New variable filename for it.
* stack.c (frame_info): Likewise.
* symmisc.c: Include source.h.
(dump_objfile, dump_symtab_1, maintenance_print_symbols)
(maintenance_info_symtabs): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* symtab.c (iterate_over_some_symtabs): Call
compare_filenames_for_search also with symtab_to_fullname.
(lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
symtab->filename refererences by symtab_to_filename_for_display calls.
(find_line_symtab): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
(file_matches): Replace filename_cmp by compare_filenames_for_search.
(print_symbol_info): Make the last parameter const char *. New
variable s_filename. Use it in the function.
(symtab_symbol_info): Make the last_filename variable const char *.
Replace symtab->filename refererences by symtab_to_filename_for_display
calls.
(rbreak_command): New variable fullname. Use it. Replace
symtab->filename refererence by symtab_to_filename_for_display call.
* tracepoint.c (set_traceframe_context, trace_find_line_command)
(print_one_static_tracepoint_marker): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
* tui/tui-source.c (tui_set_source_content): New variables filename and
s_filename. Replace symtab->filename refererences by this variable.
Replace other symtab->filename refererences by
symtab_to_filename_for_display calls.
* tui/tui-data.c (init_win_info, tui_del_window, tui_free_window):
Rename field reference filename to fullname.
* tui/tui-data.h (struct tui_source_info): Rename field filename to
fullname. New comment for it.
* tui/tui-source.c (tui_set_source_content): Rename field reference
filename to fullname. Initialize field by symtab_to_fullname now.
* tui/tui-winsource.c (tui_update_breakpoint_info): Rename field
reference filename to fullname. Use symtab_to_fullname during
comparison.
Code cleanup.
* breakpoint.c (print_breakpoint_location): Replace bp_location field
source_file references by symtab field references. Remove variables
sal and fullname.
(momentary_breakpoint_from_master, add_location_to_breakpoint):
(clear_command, say_where): Replace bp_location field source_file
references by symtab field references.
(bp_location_dtor): Remove the source_file reference.
(update_static_tracepoint): Replace bp_location field source_file
references by symtab field references.
(breakpoint_free_objfile): New function.
* breakpoint.h (struct bp_location): Extend the comment for line_number.
Replace the field source_file by field symtab, extend its comment.
(breakpoint_free_objfile): New declaration.
* objfiles.c (free_objfile): Call breakpoint_free_objfile.
* tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
field source_file references by symtab field references.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
Code cleanup.
* dwarf2read.c (fixup_go_packaging): Do not check symtab->FILENAME for
NULL.
* linespec.c (add_sal_to_sals): Likewise.
* psympriv.h (allocate_psymtab): Add ATTRIBUTE_NONNULL.
* stack.c (print_frame): Do not check symtab->FILENAME for NULL.
* symfile.h (allocate_symtab): Add ATTRIBUTE_NONNULL.
* symtab.h (struct symtab): Add comment it is never NULL for filename.
* tracepoint.c (set_traceframe_context): Do not check symtab->FILENAME
for NULL.
* tui/tui-source.c (tui_set_source_content): Likewise.
while executing the gdb command.
(tui_rl_startup_hook): Do not switch back to TUI_SINGLE_KEY_MODE if we
are called from prompt_for_continue.
* tui/tui-io.c (tui_redisplay_readline): Likewise.
* procfs.c (procfs_make_note_section): Be sure to NUL-terminate
fname and psargs before trying to concatenate.
* tui/tui-stack.c (tui_get_function_from_frame): NUL-terminate
"name" before applying strchr.
Gary Benson
Patrick Palka
Pedro Alves
Jan Kratochvil
Tom Tromey
Joel Brobecker
Andrew Burgess
Aleksandar Ristovski
Joel Brobecker
Pierre Muller
Stephane Carrez
H.J. Lu
Jim Meyering
Doug Evans