Some tests expect the the target is aarch64, but checking target
triplet is not accurate, because target triplet can be aarch64 but
the program is in arm (or aarch32) state.
This patch addes a new proc is_aarch64_target which returns true
if the target is on aarch64 state.
gdb/testsuite:
2015-07-07 Yao Qi <yao.qi@linaro.org>
* gdb.arch/aarch64-atomic-inst.exp: Check is_aarch64_target
instead of istarget "aarch64*-*-*".
* gdb.arch/aarch64-fp.exp: Likewise.
* gdb.base/float.exp: Likewise.
* gdb.reverse/aarch64.exp: Likewise.
* lib/gdb.exp (is_aarch64_target): New proc.
GDB tests running on arm target should be also run on aarch32
(32-bit mode on aarch64). There should be no difference. It is not
precise to check target triplet to decide which tests should be run,
because if I compiler all the test binary in 32-bit (arm program),
but target triplet is still aarch64, so that these arm specific tests
are skipped.
This patch is to add a new proc is_aarch32_target which return true
if target triplet is arm or the test binary is compiled for arm.
gdb/testsuite:
2015-07-07 Yao Qi <yao.qi@linaro.org>
* lib/gdb.exp (is_aarch32_target): New proc.
* gdb.arch/arm-bl-branch-dest.exp: Check is_aarch32_target
instead of "istarget "arm*-*-*"".
* gdb.arch/arm-disp-step.exp: Likewise.
* gdb.arch/thumb-bx-pc.exp: Likewise.
* gdb.arch/thumb-prologue.exp: Likewise.
* gdb.arch/thumb-singlestep.exp: Likewise.
* gdb.base/disp-step-syscall.exp: Likewise.
* gdb.base/float.exp: Likewise.
As these characters don't need to be escaped for strings
wrapped inside {} braces, we can remove the unneeded backslashes.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (test_class_help): Remove the unneeded escaping of
'[' and ']' characters.
linux_get_siginfo_type is installed to many linux gdbarch. This patch
is to move this to a common area linux-tdep.c:linux_init_abi, so that
linux_get_siginfo_type is installed to every linux gdbarch. If some
linux gdbarch needs its own version, please override it in
$ARCH_linux_init_abi. In the testsuite, we enable siginfo related
tests for all linux targets.
gdb:
2015-06-24 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-tdep.c (aarch64_linux_init_abi): Don't call
set_gdbarch_get_siginfo_type.
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Likewise.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* m68klinux-tdep.c (m68k_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* tilegx-linux-tdep.c (tilegx_linux_init_abi): Likewise.
* linux-tdep.c (linux_get_siginfo_type): Change it to static.
(linux_init_abi): Call set_gdbarch_get_siginfo_type.
* linux-tdep.h (linux_get_siginfo_type): Remove the declaration.
gdb/testsuite:
2015-06-24 Yao Qi <yao.qi@linaro.org>
* lib/gdb.exp (supports_get_siginfo_type): Return 1 for all
linux targets.
Both siginfo-obj.exp and siginfo-thread.exp have the same code
checking the support of geting a type of siginfo for a given arch.
This patch is to move these code into a proc supports_get_siginfo_type.
gdb/testsuite:
2015-06-24 Yao Qi <yao.qi@linaro.org>
* lib/gdb.exp (supports_get_siginfo_type): New proc.
* gdb.base/siginfo-obj.exp: Invoke supports_get_siginfo_type.
* gdb.base/siginfo-thread.exp: Likewise.
This patch is to let skip_hw_breakpoint_tests and skip_hw_watchpoint_tests
return 0 for aarch64 target, since aarch64 has HW watchpoint and
breakpoint registers.
With this patch applied, about 1560 watchpoint/breakpoint related tests
become enabled on aarch64-linux native testing.
gdb/testsuite:
2015-06-22 Yao Qi <yao.qi@linaro.org>
* lib/gdb.exp (skip_hw_breakpoint_tests): Return 0 for target
aarch64*-*-*.
(skip_hw_watchpoint_tests): Likewise.
This patch fixes the following tcl error
Running ../../../binutils-gdb/gdb/testsuite/gdb.base/break-interp.exp ...
ERROR: (DejaGnu) proc "else" does not exist.
The error code is NONE
The info on the error is:
invalid command name "else"
while executing
"::tcl_unknown else"
("uplevel" body line 1)
invoked from within
"uplevel 1 ::tcl_unknown $args"
gdb/testsuite:
2015-06-17 Yao Qi <yao.qi@linaro.org>
* lib/gdb.exp (get_build_id): Move braces and "else" to the same
line.
This promotes BFD's struct elf_build_id to the generic struct bfd_build_id,
populated when an ELF or PE BFD is read.
gdb is updated to use that, and to use the build-id to find symbols for PE files
also.
There is currently no generic way to extract the build-id from an object file,
perhaps an option to objdump to do this might make sense?
On x86_64-pc-cygwin, gdb's sepdebug.exp changes:
-# of unsupported tests 1
+# of expected passes 90
I don't seem to get consistent testsuite runs on i686-linux-gnu, but there
don't appear to be any regressions.
bfd/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* elf-bfd.h : Remove struct elf_build_id.
* bfd.c : Add struct bfd_build_id.
* bfd-in2.h: Regenerate.
* elf.c (elfobj_grok_gnu_build_id): Update to use bfd_build_id.
* libpei.h: Add protoype and macros for
bfd_XXi_slurp_codeview_record.
* peXXigen.c (_bfd_XXi_slurp_codeview_record): Make public
* peicode.h (pe_bfd_read_buildid): Add.
(pe_bfd_object_p): Use pe_bfd_read_buildid().
gdb/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* build-id.c: Don't include elf-bfd.h.
(build_id_bfd_get): Use bfd_build_id.
(build_id_verify): Ditto.
* build-id.h: Ditto.
(find_separate_debug_file_by_buildid): Ditto.
* python/py-objfile.c: Don't include elf-bfd.h.
(objfpy_get_build_id) Use bfd_build_id.
(objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto.
* coffread.c: Include build-id.h.
(coff_symfile_read): Try find_separate_debug_file_by_buildid.
gdb/doc/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* gdb.texinfo (Separate Debug Files): Document that PE is also
supported.
gdb/testsuite/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* gdb.base/sepdebug.exp: Add EXEEXT where needed.
* lib/gdb.exp (get_build_id): Teach how to extract build-id from a
PE file.
* lib/future.exp (gdb_find_objdump): Add gdb_find_objdump.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
This patch enable gdb.reverse tests for aarch64*-linux targets.
With this patch, there are 7 FAILs in gdb.reverse/ tests.
FAIL: gdb.reverse/finish-reverse-bkpt.exp: reverse-finish from void_func trips breakpoint at entry
FAIL: gdb.reverse/finish-reverse-bkpt.exp: no spurious proceed after breakpoint stop
FAIL: gdb.reverse/next-reverse-bkpt-over-sr.exp: reverse-next over call trips user breakpoint at function entry
FAIL: gdb.reverse/step-precsave.exp: reverse step into fn call
FAIL: gdb.reverse/step-precsave.exp: reverse step out of called fn
FAIL: gdb.reverse/step-reverse.exp: reverse step into fn call
FAIL: gdb.reverse/step-reverse.exp: reverse step out of called fn
gdb/testsuite:
2015-05-26 Omair Javaid <omair.javaid@linaro.org>
* lib/gdb.exp (supports_process_record): Return true for aarch64*-linux*.
(supports_reverse): Likewise.
Add a new predicate procedure to the gdb.exp library 'skip_tui_tests',
which returns true if the tui is not compiled into gdb.
Make use of this predicate in the gdb.base/tui-layout.exp test as an
example.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (skip_tui_tests): New proc.
* gdb.base/tui-layout.exp: Check skip_tui_tests.
Since silent handling of eof is usually the wrong thing to do, this
patch makes gdb_test_multiple handle it for all $any_spawn_id.
Currently, against gdbserver, interrupt.exp occasionaly fails like
this:
FAIL: gdb.base/interrupt.exp: send end of file
gdb.log with expect debug output enabled shows:
expect: does "\r\n\r\nChild exited with status 0\r\nGDBserver exiting\r\n" (spawn_id exp8) match regular expression "end of file"? Gate "end of file"? gate=no
expect: read eof
expect: set expect_out(spawn_id) "exp8"
expect: set expect_out(buffer) "\r\n\r\nChild exited with status 0\r\nGDBserver exiting\r\n"
FAIL: gdb.base/interrupt.exp: send end of file
Note "expect: read eof" for spawn_id=exp8. exp8 is
inferior_spawn_id/gdbserver_spawn_id. That means
expect/gdb_test_multiple saw gdbserver exit before we got the expected
gdb output. Since there's no explicit pattern for "eof", expect (and
thus gdb_test_multiple) just returns.
After this commit, we get instead:
ERROR: Process no longer exists
UNRESOLVED: gdb.base/interrupt.exp: send end of file
Note that before we still got an FAIL because $saw_inferior_exit is 0
when we get to:
gdb_assert { $saw_eof && $saw_inferior_exit } $msg
Fixing the fail (now unresolved) will be the subject of a separate
patch.
gdb/testsuite/ChangeLog:
2015-04-23 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_test_multiple): Match eof/full_buffer/timeout
on $any_spawn_id instead of only on $gdb_spawn_id.
Problem reported as PR pascal/17815
Part 1/3: Remember the case pattern that allowed finding a field of this.
File gdb/p-exp.y modified
This is the fix in the pascal parser (p-exp.y),
to avoid the error that GDB does find normal variables
case insensitively, but not fields of this,
inside a class or object method.
Part 2/3: Add "class" option for pascal compiler
File gdb/testsuite/lib/pascal.exp
This part of the patch series is unchanged.
It adds class option to pascal compiler
which adds the required command line option to
accept pascal class types.
Part 3/3:
New file: gdb/testsuite/gdb.pascal/case-insensitive-symbols.exp
New file: gdb/testsuite/gdb.pascal/case-insensitive-symbols.pas
Here is an updated version of this test, using Pedro's suggestions.
Test to check that PR 17815 is fixed.
Commit 6423214f (testsuite: Don't use expect_background to reap
gdbserver) broke a couple tests that set gdbserver_reconnect_p and
restart gdb before reconnecting, because a gdb_exit (e.g., through
clean_restart) exits gdbserver unconditionally.
Fixes, with --target_board=native-gdbserver:
-FAIL: gdb.trace/mi-tracepoint-changed.exp: reconnect: break-info 1
+PASS: gdb.trace/mi-tracepoint-changed.exp: reconnect: tracepoint created
+PASS: gdb.trace/mi-tracepoint-changed.exp: reconnect: tracepoint on marker is installed
+PASS: gdb.trace/mi-tracepoint-changed.exp: reconnect: break-info 1
-FAIL: gdb.trace/mi-tsv-changed.exp: upload: tsv1 created
-FAIL: gdb.trace/mi-tsv-changed.exp: upload: tsv2 created
+PASS: gdb.trace/mi-tsv-changed.exp: upload: tsv1 created
+PASS: gdb.trace/mi-tsv-changed.exp: upload: tsv2 created
gdb/testsuite/
2015-04-16 Pedro Alves <palves@redhat.com>
* lib/gdbserver-support.exp (gdb_exit): If gdbserver_reconnect_p
is set, don't exit gdbserver.
I see the following two timeout fails on pandaboard (arm-linux target),
FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit (timeout)
FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: continue until exit (timeout)
In this test, more than one watchpoint is used, so the following
watchpoint requests fall back to software watchpoint, so that GDB
will single step all the way and it is very slow.
This patch is to copy the fix from
[PATCH] GDB/testsuite: Correct gdb.base/watchpoint-solib.exp timeout tweak
https://sourceware.org/ml/gdb-patches/2014-07/msg00716.html
I find the left-over of this patch review is to factor out code into
a procedure, so I do that in this patch.
Re-run tests watch-bitfields.exp, watchpoint-solib.exp, sigall-reverse.exp,
and until-precsave.exp on pandaboard, no regression.
gdb/testsuite:
2015-04-15 Pedro Alves <palves@redhat.com>
Yao Qi <yao.qi@linaro.org>
* gdb.base/watch-bitfields.exp (test_watch_location): Increase
timeout by factor of 4.
(test_regular_watch): Likewise.
* gdb.base/watchpoint-solib.exp: Use with_timeout_factor.
* gdb.reverse/sigall-reverse.exp: Likewise.
* gdb.reverse/until-precsave.exp: Likewise.
* lib/gdb.exp (with_timeout_factor): New proc.
(gdb_expect): Move some code to ...
(get_largest_timeout): ... here. New procedure.
I see the error when I run gdb-sigterm.exp with native-gdbserver
on x86_64-linux.
infrun: prepare_to_wait^M
Cannot execute this command while the target is running.^M
Use the "interrupt" command to stop the target^M
and then try again.^M
gdb.base/gdb-sigterm.exp: expect eof #0: got eof
gdb.base/gdb-sigterm.exp: expect eof #0: stepped 12 times
ERROR OCCURED: : spawn id exp8 not open
while executing
"expect {
-i exp8 -timeout 10
-re "$gdb_prompt $" {
exp_continue
}
-i "$server_spawn_id" eof {
wait -i $expect_out(spawn_id)
unse..."
("uplevel" body line 1)
invoked from within
In gdb-sigterm.exp, SIGTERM is sent to GDB and it exits. However,
Dejagnu or tcl doesn't know this.
This patch is to catch the exception, but error messages are still
shown in the console and gdb.log. In order to avoid this, we also
replace gdb_expect with expect.
gdb/testsuite:
2015-04-13 Yao Qi <yao.qi@linaro.org>
* lib/gdbserver-support.exp (gdb_exit): Catch exception
and use expect instead of gdb_expect.
Some important tests, like gdb.base/interrupt.exp end up skipped
against gdbserver, because they depend on inferior I/O, which
gdbserver doesn't do.
This patch adds a mechanism that makes it possible to make them work.
It adds a new "inferior_spawn_id" global that is the spawn ID used for
I/O interaction with the inferior. By default, for native targets, or
remote targets that can do I/O through GDB (semi-hosting) this will be
the same as the gdb/host spawn ID. Otherwise, the board may set this
to some other spawn ID. When debugging with GDBserver, this will be
set to GDBserver's spawn ID.
Then tests can use send_inferior instead of send_gdb to send input to
the inferior, and use expect's "-i" switch to select which spawn ID to
use for matching input/output. That is, something like this will now
work:
send_inferior "echo me\n"
gdb_test_multiple "continue" "test msg" {
-i "$inferior_spawn_id" -re "echo me\r\necho\r\n" {
...
}
}
Or even:
gdb_test_multiple "continue" "test msg" {
-i "$inferior_spawn_id" -re "hello world" {
...
}
-i "$gdb_spawn_id" -re "error.*$gdb_prompt $" {
...
}
}
Of course, by default, gdb_test_multiple still matches with
$gdb_spawn_id.
gdb/testsuite/ChangeLog:
2015-04-07 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (inferior_spawn_id): New global.
(gdb_test_multiple): Handle "-i". Reset the spawn id to GDB's
spawn id after processing the user code.
(default_gdb_start): Set inferior_spawn_id.
(send_inferior): New procedure.
* lib/gdbserver-support.exp (gdbserver_start): Set
inferior_spawn_id.
(close_gdbserver, gdb_exit): Unset inferior_spawn_id.
I adjusted a test to do 'expect -i $server_spawn_id -re ...', and saw
really strange behavior. Whether that expect would work, depended on
whether GDB would also send output and the same expect matched it too
(on $gdb_spawn_id). I was perplexed until I noticed that
gdbserver_spawn spawns gdbserver and then uses expect_background to
reap gdbserver. That expect_background conflicts/races with any
"expect -i $server_spawn_id" done anywhere else in parallel...
In order to make it possible for tests to read inferior I/O out of
$server_spawn_id, we to get rid of that expect_background. This patch
makes us instead reap gdbserver's spawn id when GDB exits. If GDB is
still around, this gives a chance for gdbserver to exit cleanly. The
current code in gdb_finish uses "kill", but that doesn't work with
extended-remote (gdbserver doesn't exit). We now use "monitor exit"
instead which works in both remote and extended-remote modes.
gdb/testsuite/ChangeLog:
2015-04-07 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_finish): Delete persistent gdbserver handling.
* lib/gdbserver-support.exp (gdbserver_start): Make
$server_spawn_id global.
(gdbserver_start): Don't wait for gdbserver's spawn id with
expect_background.
(close_gdbserver): New procedure.
(gdb_exit): Rename the default version and reimplement.
While teaching gdb_test_multiple to forward "-i" to gdb_expect, I
found that with:
gdb_test_multiple (...) {
-i $some_variable -re "..." {}
}
$some_variable was not getting expanded in the gdb_test_multiple
caller's scope. This is a bug inside gdb_test_multiple. When
processing an argument in passed in user code, it was appending the
original argument literally, instead of appending the uplist'ed
argument.
gdb/testsuite/ChangeLog:
2015-04-07 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_test_multiple): When processing an argument,
append the substituted item, not the original item.
The "dest" parameter to fpc_compile/gpc_compile is the name of
compilation destination file, not a board name.
This patch fixes this by using names consistent with
lib/future.exp:gdb_default_target_compile.
gdb/testsuite/ChangeLog:
* lib/pascal.exp (gpc_compile): Rename dest arg to destfile.
Fix dest parameter to board_info.
(fpc_compile): Ditto.
(gdb_compile_pascal): Rename dest arg to destfile.
Exactly like x86_64-*-mingw, SYMBOL_PREFIX should not be set to "_" for
x86_64_*_cygwin
gdb/testuite/ChangeLog:
* lib/gdb.exp (gdb_target_symbol_prefix_flags): Don't set
SYMBOL_PREFIX for x86_64-*-cygwin.
When interrupting a thread in non-stop vs all-stop, the signal given in
the MI *stopped event is not the same. Currently, mi_expect_interrupt only
accepts the case for non-stop, so this adds the alternative for all-stop.
gdb/testsuite/ChangeLog:
* lib/mi-support.exp (mi_expect_interrupt): Accept
alternative event for when in all-stop mode.
gdb_test_multiple is supposed to return -1 on internal error:
# Returns:
# 1 if the test failed, according to a built-in failure pattern
# 0 if only user-supplied patterns matched
# -1 if there was an internal error.
But alas, that's broken, it returns success... It looks like the code
is assuming an earlier 'set result -1' is still in effect, but
'result' is set to 0 at the end, just before we call gdb_expect:
set result 0
set code [catch {gdb_expect $code} string]
gdb/testsuite/
2015-03-02 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_test_multiple) <internal error>: Set result to
-1.
In some scenarios, GDB or GDBserver can be spawned with input _not_
connected to a tty, and then tests that rely on stdio fail with
timeouts, because the inferior's stdout and stderr streams end up
fully buffered.
See discussion here:
https://sourceware.org/ml/gdb-patches/2015-02/msg00809.html
We have a hack in place that works around this for Windows testing,
that forces every test program to link with an .o file that does
(lib/set_unbuffered_mode.c):
static int __gdb_set_unbuffered_output (void) __attribute__ ((constructor));
static int
__gdb_set_unbuffered_output (void)
{
setvbuf (stdout, NULL, _IONBF, BUFSIZ);
setvbuf (stderr, NULL, _IONBF, BUFSIZ);
}
That's a bit hacky; it ends up done for _all_ tests.
This patch adds a way to do this unbuffering explicitly from the test
code itself, so it is done only when necessary, and for all
targets/hosts. For starters, it adjusts gdb.base/interrupt.c to use
it.
Tested on x86_64 Fedora 20, native, and against a remote gdbserver
board file that connects to the target with ssh, with and without -t
(create pty).
gdb/testsuite/
2015-02-27 Pedro Alves <palves@redhat.com>
* lib/unbuffer_output.c: New file.
* gdb.base/interrupt.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
On aarch64, we got the following fail:
(gdb) disassemble func
Dump of assembler code for function func:
0x0000000000400730 <+0>: ret
End of assembler dump.^M
(gdb) x/2i func+0^M
0x400730 <func>: ret^M
0x400734 <main>: stp x29, x30, [sp,#-16]!^M
(gdb) FAIL: gdb.dwarf2/dw2-ifort-parameter.exp: x/2i func+0
the pattern in proc function_range expects to match <func+0>, however,
GDB doesn't display the offset when it is zero. This patch is to
adjust the pattern when $func_length is zero.
gdb/testsuite:
2015-02-26 Yao Qi <yao.qi@linaro.org>
* lib/dwarf.exp (function_range): Adjust pattern when $func_length
is zero.
Because delete_breakpoints uses gdb_expect directly, an internal error
results in slow timeouts instead of quickly bailing out. This patch
rewrites the procedure to use gdb_test_multiple instead, while
preserving the existing general logic ("delete breakpoints" + "info
breakpoints").
gdb/testsuite/
2015-02-23 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (delete_breakpoints): Rewrite using
gdb_test_multiple.
This patch adds some simple tests testing the support for DTrace USDT
probes. The testsuite will be skipped as unsupported in case the user
does not have DTrace installed on her system. The tests included in the
test suite test breakpointing on DTrace probes, enabling and disabling
probes, printing of probe arguments of several types and also
breakpointing on several probes with the same name.
gdb/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* lib/dtrace.exp: New file.
* gdb.base/dtrace-probe.exp: Likewise.
* gdb.base/dtrace-probe.d: Likewise.
* gdb.base/dtrace-probe.c: Likewise.
* lib/pdtrace.in: Likewise.
* configure.ac: Output variables with the transformed names of
the strip, readelf, as and nm tools. AC_SUBST lib/pdtrace.in.
* configure: Regenerated.
gdb_interact is a small utility that we have found quite useful to debug
test cases.
Putting gdb_interact in a test suspends it and allows to interact with
gdb to inspect whatever you want. You can then type ">>>" to resume the
test execution. Of course, this is only for gdb devs. It wouldn't make
sense to leave a gdb_interact permanently in a test case.
When starting the interaction with the user, the script prints this
banner:
+------------------------------------------+
| Script interrupted, you can now interact |
| with by gdb. Type >>> to continue. |
+------------------------------------------+
Notes:
* When gdb is launched, the gdb_spawn_id variable (lib/gdb.exp) is
assigned -1. Given the name, I would expect it to contain the gdb
expect spawn id, which is needed for interact. I changed all places
that set gdb_spawn_id to -1 to set it to the actual gdb spawn id
instead.
* When entering the "interact" mode, the last (gdb) prompt is already
eaten by expect, so it doesn't show up on the terminal. Subsequent
prompts do appear though. We tried to print "(gdb)" just before the
interact to replace it. However, it could be misleading if you are
debugging an MI test case, it makes you think that you are typing in a
CLI prompt, when in reality it's MI. In the end I decided that since
the feature is for developers who know what they're doing and that one
is normally consciously using gdb_interact, the script doesn't need
to babysit the user.
* There are probably some quirks depending on where in the script
gdb_interact appears (e.g. it could interfere with following
commands and make them fail), but it works for most cases. Quirks can
always be fixed later.
The idea and original implementation was contributed by Anders
Granlund, a colleague of mine. Thanks to him.
gdb/testsuite/ChangeLog:
* gdb.base/statistics.exp: Assign spawn id to gdb_spawn_id.
* gdb.base/valgrind-db-attach.exp: Same.
* gdb.base/valgrind-infcall.exp: Same.
* lib/mi-support.exp (default_mi_gdb_start): Same.
* lib/prompt.exp (default_prompt_gdb_start): Same.
* lib/gdb.exp (default_gdb_spawn): Same.
(gdb_interact): New.
gdb/testsuite/ChangeLog:
* lib/dwarf.exp (Dwarf): Flag an error if a numeric attribute value
is given without an explicit form.
* gdb.dwarf2/arr-subrange.exp: Specify forms for all numeric
attributes.
* gdb.dwarf/corrupt.exp: Ditto.
* gdb.dwarf2/enum-type.exp: Ditto.
* gdb.trace/entry-values.exp: Ditto.
* gdb.trace/unavailable-dwarf-piece.exp: Ditto.
We already skip "attach" tests if the target board is remote, in
dejagnu's sense, as we use TCL's exec to spawn the program on the
build machine. We should also skip these tests if testing with
"target remote" or other stub-like targets where "attach" doesn't make
sense.
Add a helper procedure that centralizes the checks a test that needs
to spawn a program for testing "attach" and make all test files that
use spawn_wait_for_attach check it.
gdb/testsuite/
2015-01-09 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (can_spawn_for_attach): New procedure.
(spawn_wait_for_attach): Error out if can_spawn_for_attach returns
false.
* gdb.base/attach.exp: Use can_spawn_for_attach instead of
checking whether the target board is remote.
* gdb.multi/multi-attach.exp: Likewise.
* gdb.python/py-sync-interp.exp: Likewise.
* gdb.server/ext-attach.exp: Likewise.
* gdb.python/py-prompt.exp: Use can_spawn_for_attach before the
tests that need to attach, instead of checking whether the target
board is remote at the top of the file.
On Sun, 14 Dec 2014 07:00:28 +0100, Yao Qi wrote:
The build on mingw host is broken because mingw has no mkdtemp.
../../../git/gdb/compile/compile.c: In function 'get_compile_file_tempdir':
../../../git/gdb/compile/compile.c:194:3: error: implicit declaration of function 'mkdtemp' [-Werror=implicit-function-declaration]
tempdir_name = mkdtemp (tname);
^
../../../git/gdb/compile/compile.c:194:16: error: assignment makes pointer from integer without a cast [-Werror]
tempdir_name = mkdtemp (tname);
^
cc1: all warnings being treated as errors
In the end I have managed to test it by Wine myself:
$ wine build_win32/gdb/gdb.exe -q build_win32/gdb/gdb.exe -ex start -ex 'compile code 1' -ex 'set confirm no' -ex quit
[...]
Temporary breakpoint 1, main (argc=1, argv=0x241418) at ../../gdb/gdb.c:29
29 args.argc = argc;
Could not load libcc1.so: Module not found.
Even if it managed to load libcc1.so (it needs host-dependent name libcc1.dll)
then it would soon end up at least on:
default_infcall_mmap:
error (_("This target does not support inferior memory allocation by mmap."));
As currently there is only:
linux-tdep.c:
set_gdbarch_infcall_mmap (gdbarch, linux_infcall_mmap);
While one could debug Linux targets from MS-Windows host I find it somehow
overcomplicated now when we are trying to get it running at least on native
Linux x86*.
The 'compile' project needs a larger port effort to run on MS-Windows.
gdb/ChangeLog
2014-12-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix MinGW compilation.
* compile/compile.c (get_compile_file_tempdir): Call error if
!HAVE_MKDTEMP.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac (AC_CHECK_FUNCS): Add mkdtemp.
gdb/testsuite/ChangeLog
2014-12-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix MinGW compilation.
* gdb.compile/compile-ops.exp: Update untested message if
!skip_compile_feature_tests.
* gdb.compile/compile-setjmp.exp: Likewise.
* gdb.compile/compile-tls.exp: Likewise.
* gdb.compile/compile.exp: Likewise.
* lib/gdb.exp (skip_compile_feature_tests): Check also "Command not
supported on this host".
When gdb starts, the lines that appear before the first prompt may get
paginated if the terminal in which the tests are ran is too small (in
terms of rows). These lines include the welcome/license message and
possibly more, such as "Reading symbols from...". Pagination is disabled
right after gdb is started (with "set height 0"), but this output happens
before we are able to set height.
If these lines get paginated, gdb waits for the user to press enter and
the test harness waits for gdb to print its prompt, resulting in a
deadlock.
My first idea was to launch gdb with --quiet. However, some lines are
still printed ("Reading symbols from...", some more stuff when attaching
with --pid, etc).
The proposed solution simply expects that pagination can occur after
starting gdb. If this is the case, it sends a "\n" and loops.
gdb/testsuite/Changelog:
* lib/gdb.exp (default_gdb_start): After starting gdb, loop
as long as we get pagination notifications.
This final patch adds the new "compile" command and subcommands, and
all the machinery needed to make it work.
A shared library supplied by gcc is used for all communications with
gcc. Types and most aspects of symbols are provided directly by gdb
to the compiler using this library.
gdb provides some information about the user's code using plain text.
Macros are emitted this way, and DWARF location expressions (and
bounds for VLA) are compiled to C code.
This hybrid approach was taken because, on the one hand, it is better
to provide global declarations and such on demand; but on the other
hand, for local variables, translating DWARF location expressions to C
was much simpler than exporting a full compiler API to gdb -- the same
result, only easier to implement, understand, and debug.
In the ordinary mode, the user's expression is wrapped in a dummy
function. After compilation, gdb inserts the resulting object code
into the inferior, then calls this function.
Access to local variables is provided by noting which registers are
used by location expressions, and passing a structure of register
values into the function. Writes to registers are supported by
copying out these values after the function returns.
This approach was taken so that we could eventually implement other
more interesting features based on this same infrastructure; for
example, we're planning to investigate inferior-side breakpoint
conditions.
gdb/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* NEWS: Update.
* symtab.h (struct symbol_computed_ops) <generate_c_location>: New
field.
* p-lang.c (pascal_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* objc-lang.c (objc_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* language.h (struct language_defn) <la_get_compile_instance,
la_compute_program>: New fields.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Update.
* jv-lang.c (java_language_defn): Update.
* go-lang.c (go_language_defn): Update.
* f-lang.c (f_language_defn): Update.
* dwarf2loc.h (dwarf2_compile_property_to_c): Declare.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): New
functions.
(dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Update.
* defs.h (enum compile_i_scope_types): New.
(enum command_control_type) <compile_control>: New constant.
(struct command_line) <control_u>: New field.
* d-lang.c (d_language_defn): Update.
* compile/compile.c: New file.
* compile/compile-c-support.c: New file.
* compile/compile-c-symbols.c: New file.
* compile/compile-c-types.c: New file.
* compile/compile.h: New file.
* compile/compile-internal.h: New file.
* compile/compile-loc2c.c: New file.
* compile/compile-object-load.c: New file.
* compile/compile-object-load.h: New file.
* compile/compile-object-run.c: New file.
* compile/compile-object-run.h: New file.
* cli/cli-script.c (multi_line_command_p, print_command_lines)
(execute_control_command, process_next_line)
(recurse_read_control_structure): Handle compile_control.
* c-lang.h (c_get_compile_context, c_compute_program): Declare.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Update.
* ada-lang.c (ada_language_defn): Update.
* Makefile.in (SUBDIR_GCC_COMPILE_OBS, SUBDIR_GCC_COMPILE_SRCS):
New variables.
(SFILES): Add SUBDIR_GCC_COMPILE_SRCS.
(HFILES_NO_SRCDIR): Add compile.h.
(COMMON_OBS): Add SUBDIR_GCC_COMPILE_OBS.
(INIT_FILES): Add SUBDIR_GCC_COMPILE_SRCS.
(compile.o, compile-c-types.o, compile-c-symbols.o)
(compile-object-load.o, compile-object-run.o, compile-loc2c.o)
(compile-c-support.o): New targets.
gdb/doc/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Altering): Update.
(Compiling and Injecting Code): New node.
gdb/testsuite/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* configure.ac: Add gdb.compile/.
* configure: Regenerate.
* gdb.compile/Makefile.in: New file.
* gdb.compile/compile-ops.exp: New file.
* gdb.compile/compile-ops.c: New file.
* gdb.compile/compile-tls.c: New file.
* gdb.compile/compile-tls.exp: New file.
* gdb.compile/compile-constvar.S: New file.
* gdb.compile/compile-constvar.c: New file.
* gdb.compile/compile-mod.c: New file.
* gdb.compile/compile-nodebug.c: New file.
* gdb.compile/compile-setjmp-mod.c: New file.
* gdb.compile/compile-setjmp.c: New file.
* gdb.compile/compile-setjmp.exp: New file.
* gdb.compile/compile-shlib.c: New file.
* gdb.compile/compile.c: New file.
* gdb.compile/compile.exp: New file.
* lib/gdb.exp (skip_compile_feature_tests): New proc.
This changes the DWARF assembler to allow comments in a location
expression, and also adds support for a few new opcodes I needed.
gdb/testsuite/ChangeLog
2014-12-12 Tom Tromey <tromey@redhat.com>
* lib/dwarf.exp (_location): Ignore blank lines. Allow comments.
Handle DW_OP_pick, DW_OP_skip, DW_OP_bra.
This patch introduces a function in gdbserver-support.exp to find out
whether the current target is GDBserver.
The code was inspired from gdb.trace/qtro.exp, so it replaces the code
there by a call to the new function.
gdb/testsuite/ChangeLog:
* gdb.trace/qtro.exp: Replace gdbserver detection code by...
* lib/gdb.exp (target_is_gdbserver): New
procedure.
Dwarf::tu and Dwarf::cu allow selection of units with 64-bit offsets
through an option. When selected, unit size is encoded properly, but
offset to abbreviation unit is still encoded in a 4-byte field. This
patch fixes the problem.
Reproducer:
Dwarf::assemble "blah.s" {
tu {is_64 1 version 4 addr_size 8} 0x1122334455667788 the_type {
type_unit {} { the_type: }
}
cu {is_64 1 version 4 addr_size 8} {
compile_unit {{language @DW_LANG_C}} {}
}
}
gdb/testsuite:
* lib/dwarf.exp (Dwarf::cu, Dwarf::tu): Emit
${_cu_offset_size} bytes abbrev offset.
This patch addes DW macro attributes MACRO_AT_func and MACRO_AT_range
in dwarf assembler, which emits "DW_AT_low_pc func_start addr" and
"DW_AT_high_pc func_end addr". func_start and func_end are computed
automatically by proc function_range.
These two attributes are pseudo attribute or macro attribute, which
means they are not standard dwarf attribute in dwarf spec. Then can
be substituted or expanded to standard attributes or macro attributes.
See details in the comments to them. Dwarf assembler is extended to
handle them.
Now the attributes name/low_pc/high_pc can be replaced with
MACRO_AT_func like this:
subprogram {
{name main}
{low_pc main_start addr}
{high_pc main_end addr}
}
becomes:
subprogram {
{MACRO_AT_func { main ${srcdir}/${subdir}/${srcfile} }}
}
users don't have to worry about the start and end of function main, and
they only need to add a label main_label in main.
gdb/testsuite:
2014-11-14 Yao Qi <yao@codesourcery.com>
* lib/dwarf.exp (function_range): New procedure.
(Dwarf::_handle_macro_at_func): New procedure.
(Dwarf::_handle_macro_at_range): New procedure.
(Dwarf): Handle MACRO_AT_func and MACRO_AT_range.
This patch is to move some code to a new procedure _handle_attribute,
which will be used in my following patches.
gdb/testsuite:
2014-11-14 Yao Qi <yao@codesourcery.com>
* lib/dwarf.exp (_handle_DW_TAG): Move some code to ...
(_handle_attribute): New procedure.
I see the following two fails on arm-none-eabi target, because argv[0]
isn't available.
print argv[0]^M
$1 = 0x1f78 "/dev/null"^M
(gdb) FAIL: gdb.base/argv0-symlink.exp: kept file symbolic link name
print argv[0]^M
$1 = 0x1f78 "/dev/null"^M
(gdb) FAIL: gdb.base/argv0-symlink.exp: kept directory symbolic link name
My first thought is to check [target_info exists noargs], and skip the
test if it returns true. However, noargs is set in gdbserver board
files, so argv0-symlink.exp will be skipped on gdbserver board file.
The change is too aggressive.
When the program is running with gdbserver, argv[1] to argv[N] aren't
available, but argv[0] is. Fortunately, argv0-symlink.exp only
requires argv[0]. argv0-symlink.exp can be run with gdbserver board
file, as what we do now.
What we need to check is whether argv[0] is available, so I add a new
proc gdb_has_argv0 to do so by starting a program, and check
argc/argv[0] to see whether argv[0] is available.
Dan fixed the similar problem by checking noargs, which is too strong.
https://sourceware.org/ml/gdb-patches/2010-02/msg00398.html as a
result, the test is skipped on gdbserver. This patch fixed it too.
gdb/testsuite:
2014-10-18 Yao Qi <yao@codesourcery.com>
* gdb.base/argv0-symlink.exp: Check argv[0] value if
gdb_has_argv0 return true.
* gdb.guile/scm-value.exp (test_value_in_inferior): Don't
check [target_info exists noargs], check [gdb_has_argv0]
instead.
* gdb.python/py-value.exp (test_value_in_inferior): Likewise.
* lib/gdb.exp (gdb_has_argv0, gdb_has_argv0_1): New
procedures.
When I run test with board file local-remote-host-native.exp, I see
the following warning,
$ make check RUNTESTFLAGS="--host_board=local-remote-host-native
--target_board=local-remote-host-native tdesc-arch.exp
HOST_DIR=/tmp/foo/"
(gdb) set tdesc filename ../../../../git/gdb/testsuite/gdb.xml/trivial.xml^M
warning: Could not open "../../../../git/gdb/testsuite/gdb.xml/trivial.xml"
(gdb) quit^
because "${srcdir}/gdb.xml/trivial.xml" doesn't exist on host. This
patch is to copy trivial.xml to host and the warning goes away.
(gdb) set tdesc filename /tmp/foo/trivial.xml^M
(gdb) quit^
tdesc-regs.exp has the similar problem that single-reg.xml may not
exist on host at all, and it should be copied to host too.
gdb/testsuite:
2014-10-17 Yao Qi <yao@codesourcery.com>
* lib/gdb.exp (gdb_skip_xml_test): Copy trivial.xml to host.
* gdb.xml/tdesc-regs.exp: Copy single-reg.xml to host.
This does most of the mechanical removal. IOW, the easy part.
This doesn't touch procfs.c as that'd be a harder excision,
potentially affecting Solaris.
mips-tdep.c is left alone. E.g., I didn't delete the GDB_OSABI_IRIX
enum value, nor references to it in mips-tdep.c. Some comments
mentioning IRIX ABIs may still be relevant and I wouldn't know what to
do with them. in That can always be done on a separate pass,
preferably by someone who can test on MIPS.
I didn't remove a reference to IRIX in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.
Built and tested on x86_64 Fedora 20, with --enable-targets=all.
Tested that building for --target=mips-sgi-irix6 on x86_64 Fedora 20
fails with:
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration mips-sgi-irix6 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `/home/pedro/gdb/mygit/build-irix'
make: *** [all] Error 2
gdb/
2014-10-10 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_TARGET_OBS): Remove mips-irix-tdep.o and solib-irix.o.
(ALLDEPFILES): Remove mips-irix-tdep.c and solib-irix.c.
(HFILES_NO_SRCDIR): Remove solib-irix.h.
* NEWS: Mention that support for mips-sgi-irix5* mips-sgi-irix6*
and been removed.
* config/mips/irix5.mh, config/mips/irix6.mh: Delete files.
* configure.ac: Remove references to IRIX.
* configure.host: Add *-*-irix* to the obsolete hosts section.
Remove all other references to irix.
* irix5-nat.c, mips-irix-tdep.c, solib-irix.c, solib-irix.h:
Delete files.
gdb/testsuite/
2014-10-10 Pedro Alves <palves@redhat.com>
* gdb.base/bigcore.exp: Remove references to IRIX.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/mips_pro.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/setvar.exp: Likewise.
* lib/gdb.exp (gdb_compile_shlib): Remove mips-sgi-irix* case.
