200x-xx-xx Phil Edwards <phil@codesourcery.com>
Richard Sandiford <richard@codesourcery.com>
* NEWS: Mention addition of --extract-symbol.
* doc/binutils.texi: Document it.
* objcopy.c (extract_symbol): New variable.
(OPTION_EXTRACT_SYMBOLS): New command_line_switch.
(copy_options): Add an entry for --extract-symbol.
(copy_usage): Mention --extract-symbol.
(copy_object): Set the start address to zero for --extract-symbol.
Do not copy private BFD data in that case.
(setup_section): Set the size, LMA and VMA to zero for
--extract-symbol. Do not copy private BFD data in that case.
(copy_section): Do not copy section contents if --extract-symbol
is passed.
(copy_main): Set extract_symbol to TRUE if --extract-symbol
is passed.
ld/testsuite/
* ld-elf/extract-symbol-1sym.d, ld-elf/extract-symbol-1sec.d,
* ld-elf/extract-symbol-1.s, ld-elf/extract-symbol-1.ld: New tests.
* ld-elf/binutils.exp: Run them.
* ld-arm/arm-elf.exp (armelftests): Move "Thumb-2 BL" test into...
(armeabitests): ... here, a new array for EABI specific tests.
(armelftests): Add extra command line options for VFP11 fix tests and thumb shared library test.
2076-02-05 H.J. Lu <hongjiu.lu@intel.com>
* ld-i386/pcrel16.d: Undo the last change.
* ld-x86-64/pcrel16.d: Likewise.
opcodes/
2076-02-05 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (OP_J): Undo the last change. Properly handle 64K
wrap around within the same segment in 16bit mode.
2076-02-02 H.J. Lu <hongjiu.lu@intel.com>
* ld-i386/pcrel16.d: Updated.
* ld-x86-64/pcrel16.d: Likewise.
opcodes/
2076-02-02 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (OP_J): Mask to 16bit only if there is a data16
prefix.
* ld-arm/vfp11-fix-none.s: New file.
* ld-arm/vfp11-fix-none.d: Expected disassembly of above.
* ld-arm/vfp11-fix-scalar.s: New file.
* ld-arm/vfp11-fix-scalar.d: Expected disassembly of above.
* ld-arm/vfp11-fix-vector.s: New file.
* ld-arm/vfp11-fix-vector.d: Expected disassembly of above.
2007-01-19 H.J. Lu <hongjiu.lu@intel.com>
* ld.h (args_type): Add new symbolic and dynamic_list fields.
* ld.texinfo: Update -Bsymbolic-functions.
* ldmain.c (main): Initialize command_line.symbolic to
symbolic_unset and command_line.dynamic_list to
dynamic_list_unset. Check -Bsymbolic, -Bsymbolic-functions and
--dynamic-list* before setting link_info.symbolic,
link_info.dynamic and link_info.dynamic_data.
* lexsup.c (option_values): Add OPTION_SYMBOLIC_FUNCTIONS.
(ld_options): Use OPTION_SYMBOLIC_FUNCTIONS with
-Bsymbolic-functions.
(parse_args): Handle -Bsymbolic-functions. Don't set
link_info.dynamic, link_info.dynamic_data and link_info.symbolic
here. Set command_line.symbolic for -Bsymbolic. Set
command_line.dynamic_list and command_line.symbolic for
--dynamic-list-data, --dynamic-list-cpp-new,
--dynamic-list-cpp-typeinfo and --dynamic-list.
ld/testsuite/
2007-01-19 H.J. Lu <hongjiu.lu@intel.com>
* ld-elf/dl6.c: New file.
* ld-elf/dl6a.out: Likewise.
* ld-elf/dl6amain.c: Likewise.
* ld-elf/dl6b.out: Likewise.
* ld-elf/dl6bmain.c: Likewise.
* ld-elf/dl6cmain.c: Likewise.
* ld-elf/dl6dmain.c: Likewise.
* ld-elf/shared.exp: Add new tests for -Bsymbolic,
-Bsymbolic-functions, --dynamic-list-data and
--dynamic-list-cpp-new.
2007-01-19 Jakub Jelinek <jakub@redhat.com>
H.J. Lu <hongjiu.lu@intel.com>
* emultempl/elf32.em (handle_option): Make sure -z max-page-size
or -z common-page-size argument is a power of 2. Call
bfd_emul_set_maxpagesize and bfd_emul_set_commonpagesize.
2007-01-19 H.J. Lu <hongjiu.lu@intel.com>
* ldmain.c (main): Don't call bfd_emul_set_maxpagesize nor
bfd_emul_set_commonpagesize.
ld/testsuite/
2007-01-19 H.J. Lu <hongjiu.lu@intel.com>
* ld-elf/maxpage3.t: New file.
* ld-elf/maxpage3a.d: Likewise.
* ld-elf/maxpage3b.d: Likewise.
* ld-elf/maxpage3c.d: Likewise.
2007-01-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3831
* elf-bfd.h (bfd_elf_link_mark_dynamic_symbol): Add an
argument, Elf_Internal_Sym *.
* elflink.c (bfd_elf_link_mark_dynamic_symbol): Mark a data
symbol dynamic if info->dynamic_data is TRUE.
(bfd_elf_record_link_assignment): Updated call to
bfd_elf_record_link_assignment.
(_bfd_elf_merge_symbol): Likewise. Always call
bfd_elf_link_mark_dynamic_symbol.
include/
2007-01-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3831
* bfdlink.h (bfd_link_info): Rename dynamic to dynamic_list.
Add dynamic and dynamic_data.
ld/
2007-01-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3831
* NEWS: Mention -Bsymbolic-functions, --dynamic-list-data and
--dynamic-list-cpp-new.
* ld.texinfo: Document -Bsymbolic-functions, --dynamic-list-data
and --dynamic-list-cpp-new.
* ldlang.c (lang_append_dynamic_list_cpp_new): New.
(lang_process): Change link_info.dynamic to
link_info.dynamic_list.
(lang_append_dynamic_list): Likewise.
* ldmain.c (main): Likewise. Initialize link_info.dynamic and
link_info.dynamic_data to FALSE.
* ldlang.h (lang_append_dynamic_list_cpp_new): New.
* lexsup.c (option_values): Add OPTION_DYNAMIC_LIST_DATA and
OPTION_DYNAMIC_LIST_CPP_NEW.
(ld_options): Add entries for -Bsymbolic-functions,
--dynamic-list-data and --dynamic-list-cpp-new. Make
-Bsymbolic-functions an alias of --dynamic-list-data.
(parse_args): Change link_info.dynamic to link_info.dynamic_list.
Set link_info.dynamic to TRUE for --dynamic-list and
--dynamic-list-cpp-typeinfo. Handle --dynamic-list-data and
--dynamic-list-cpp-new.
ld/testsuite/
2007-01-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3831
* ld-elf/del.cc: New.
* ld-elf/dl5.cc: Likewise.
* ld-elf/dl5.out: Likewise.
* ld-elf/new.cc: Likewise.
* ld-elf/shared.exp: Add tests for --dynamic-list-data and
--dynamic-list-cpp-new.
* elf.c (assign_file_positions_for_load_sections): We can
require fewer phdrs than expected.
ld/
* emultempl/elf-generic.em (gdl_map_segments): Only allow header
shrinkage for the first few iterations.
ld/testsuite/
* ld-elf/header.d: New.
* ld-elf/header.t: New.
* ld-elf/header.s: New.
2006-12-29 H.J. Lu <hongjiu.lu@intel.com>
* elflink.c (elf_link_add_object_symbols): Remember the symbol
size only if it is defined.
ld/testsuite/
2006-12-29 H.J. Lu <hongjiu.lu@intel.com>
* ld-elf/wrap.exp: New file.
* ld-elf/wrap1.c: Likewise.
* ld-elf/wrap1.out: Likewise.
* ld-elf/wrap1a.c: Likewise.
* ld-elf/wrap1b.c: Likewise.
* pe-dll.h (pe_bfd_is_dll): Declare.
* emultempl/pe.em (gld_${EMULATION_NAME}_recognized_file): Recognize dlls using
pe_bfd_is_dll instead of using the filename extension.
shared_data): If !SHARED, move to...
* ld-elfvsb/sh2.c: ... here.
* ld-elfvsb/elfvsb.exp: Add -DSHARED to compiler options when
building with $picflag.
* arm-dis.c (last_is_thumb): Delete.
(enum map_type, last_type): New.
(print_insn_data): New.
(get_sym_code_type): Take MAP_TYPE argument. Check the type of
the right symbol. Handle $d.
(print_insn): Check for mapping symbols even without a normal
symbol. Adjust searching. If $d is found see how much data
to print. Handle data.
gas/
* config/tc-arm.h (md_cons_align): Define.
(mapping_state): New prototype.
* config/tc-arm.c (mapping_state): Make global.
gas/testsuite/
* gas/arm/arm7t.d, gas/arm/neon-ldst-rm.d, gas/arm/thumb2_pool.d,
gas/arm/tls.d: Update for $d support.
* gas/arm/mapshort.d, gas/arm/mapshort.s: New test.
* gas/elf/section2.e-armeabi: Update.
* gas/elf/section2.e-armelf: New file.
* gas/elf/elf.exp: Use it.
ld/testsuite/
* ld-arm/mixed-app.d, ld-arm/tls-app.d, ld-arm/tls-lib.d: Update
for $d support.
(cie_compare): Removed.
(cie_eq, cie_hash, cie_compute_hash): New functions.
(_bfd_elf_discard_section_eh_frame): Rewrite not to rely on FDEs
pointing only to last CIE and allow merging of any duplicate CIEs,
not just duplicate consecutive CIEs.
(_bfd_elf_discard_section_eh_frame_hdr): Delete cies hash table.
* elf-bfd.h (struct cie_header, struct cie): Removed.
(struct eh_frame_sec_info): Remove alloced field.
(struct eh_frame_hdr_info): Remove last_cie, last_cie_sec
and last_cie_inf fields. Add cies field.
* ld-elf/eh5.d: New test.
* ld-elf/eh5.s: New file.
* ld-elf/eh5a.s: New file.
* ld-elf/eh5b.s: New file.
* elf-bfd.h (local_call_stubs): New member.
* elfxx-mips.c (FN_STUB_P, CALL_STUB_P, CALL_FP_STUB_P): New macros.
(mips_elf_calculate_relocation): Handle local mips16 call stubs.
(mips16_stub_section_p): Rename from mips_elf_stub_section_p, use
the new stub macros.
(_bfd_mips_elf_check_relocs): Handle call stubs for code which
mixes mips16 and mips32 functions. Use mips16_stub_section_p. Mark
used stubs with SEC_KEEP. Use the new stub macros.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips16-intermix.d, gas/mips/mips16-intermix.s: New
testcase.
* gas/mips/mips.exp: Run new testcase.
[ ld/testsuite/ChangeLog ]
* ld-mips-elf/mips16-intermix-1.s, ld-mips-elf/mips16-intermix-2.s,
ld-mips-elf/mips16-intermix.d: New testcase.
* ld-mips-elf/mips-elf.exp (mips16_intermix_test): Run new testcases.
* elfxx-mips.c (_bfd_mips_elf_finish_dynamic_sections): Make the
size of .rel.dyn reflect the value of DT_RELSZ.
ld/testsuite/
* ld-mips-elf/multi-got-1.d: Remove trailing R_MIPS_NONE entries.
* ld-mips-elf/tls-multi-got-1.got: Likewise.
* ld-mips-elf/tls-multi-got-1.r: Likewise.
* elfxx-mips.c (_bfd_mips_elf_additional_program_headers): Allocate
a PT_NULL header for dynamic objects.
(_bfd_mips_elf_modify_segment_map): Add it.
ld/testsuite/
* ld-mips-elf/multi-got-1.d: Do not expect a particular address
for DT_HASH.
* ld-mips-elf/rel32-o32.d: Bump addresses by 0x20 to account for
the extra program header.
* ld-mips-elf/rel32-n32.d: Likewise.
* ld-mips-elf/tlslib-o32.got: Likewise.
* ld-mips-elf/tlslib-o32-hidden.got: Likewise.
* ld-mips-elf/tlslib-o32-ver.got: Likewise.
* ld-mips-elf/tls-multi-got-1.got: Likewise.
* ld-mips-elf/tls-multi-got-1.r: Likewise.
* ld-mips-elf/rel64.d: Bump addresses by 0x30 to account for the
extra program header.
* ld-mips-elf/tlsdyn-o32.d: Reduce the GOT offset by 32 to account
for the extra program header, and thus the shorter gap between the
text and data segments.
* ld-mips-elf/tlsdyn-o32-1.d: Likewise.
* ld-mips-elf/tlsdyn-o32-2.d: Likewise.
* ld-mips-elf/tlsdyn-o32-3.d: Likewise.
* ld-mips-elf/tlsdyn-o32.got: Bump GOT text addresses by 0x20
to account for the extra program header.
* ld-mips-elf/tlsdyn-o32-1.got: Likewise.
* ld-mips-elf/tlsdyn-o32-2.got: Likewise.
* ld-mips-elf/tlsdyn-o32-3.got: Likewise.
* emulparams/elf32bmip.sh (OTHER_GOT_RELOC_SECTIONS): Define.
* emulparams/elf32bmipn32-defs.sh (OTHER_GOT_RELOC_SECTIONS): Likewise.
ld/testsuite/
* ld-mips-elf/rel32-o32.d: Bump the section number of .text by 1
to account for the fact that .rel.dyn is now before .text in the
section table.
* ld-mips-elf/rel32-n32.d: Likewise.
* ld-mips-elf/rel64.d: Likewise.
* elfxx-mips.c (sort_dynamic_relocs): Sort relocations against the
same symbol by increasing r_offset.
(sort_dynamic_relocs_64): Likewise. Fix comparisons between very
large and very small symbol indexes.
ld/testsuite/
* ld-mips-elf/tlslib-o32-hidden.got: Sort relocations against the
same symbol in order of increasing r_offset.
* ld-mips-elf/tls-multi-got-1.got: Likewise.
* ld-mips-elf/tls-hidden3.r: Likewise.
* ld-mips-elf/tls-hidden4.r: Likewise.
* elfxx-mips.c (_bfd_mips_elf_size_dynamic_sections): Add DT_DEBUG
and DT_MIPS_RLD_MAP tags for position-independent executables.
Do not add DT_DEBUG to shared libraries for any MIPS target.
ld/testsuite/
* ld-mips-elf/multi-got-1.d: Remove DT_DEBUG tag. Do not require
a specific file offset for .dynamic. Reduce DT_HASH by 8 to account
for removed tag.
* ld-mips-elf/tls-multi-got-1.r: Likewise. Also reduce DT_REL by 8.
Reduce PLTGOT and symbol values by 16 to account for the removed tag.
* ld-mips-elf/textrel-1.d: Remove DT_DEBUG tag.
* ld-mips-elf/rel32-n32.d: Reduce addresses by 16 to account for
removed DT_DEBUG tag.
* ld-mips-elf/rel64.d: Likewise.
* ld-mips-elf/tls-multi-got-1.got: Likewise.
* ld-mips-elf/tlslib-o32-hidden.got: Likewise.
* ld-mips-elf/rel32-n32.d: Bump addresses by 0x30 to account for
the fact that .reginfo is now placed before .text. Change the
section number of .text accordingly.
* ld-mips-elf/elf-rel-got-n32.d: Adjust page gap from 0x100000
to 0x10000. Move .reginfo before .text and bump .text addresses
by 0x10 to make room. Move data segment down by 0x10 bytes to
account for new size of text segment.
* ld-mips-elf/elf-rel-xgot-n32.d: Likewise.
* ld-mips-elf/elf-rel-got-n64-linux.d: Adjust page gap from
0x100000 to 0x10000.
* ld-mips-elf/elf-rel-xgot-n64-linux.d: Likewise.
* Makefile.am (eelf64bmip.c): Depend on emulparams/elf64bmip-defs.sh.
(eelf64btsmip.c, eelf64ltsmip.c): Likewise.
* Makefile.in: Regenerate.
* emulparams/elf32bmipn32-defs.sh (INITIAL_READONLY_SECTIONS): Include
.reginfo rather than .MIPS.options.
* emulparams/elf64bmip-defs.sh: New file.
* emulparams/elf64bmip.sh: Include it.
(COMMONPAGESIZE): Delete.
* emulparams/elf64btsmip.sh: As for elf64bmip.sh.
ld/testsuite/
* ld-mips-elf/branch-misc-1.d: Set the start address to 0x20000000.
* ld-mips-elf/jalbal.d: Likewise 0x200000a0.
* ld-mips-elf/jaloverflow-2.d: Likewise 0x20000000.
* ld-mips-elf/reloc-3-n32.d: Likewise.
* ld-mips-elf/reloc-3.d: Likewise.
* ld-mips-elf/textrel-1.d: Don't require a specific file offset for
.dynamic.
* elf-eh-frame.c (skip_cfa_op): Fix handling of DW_CFA_advance_loc.
Handle DW_CFA_{remember,restore}_state, DW_CFA_GNU_window_save,
DW_CFA_val_{offset{,_sf},expression}.
(skip_non_nops): Record number of DW_CFA_set_loc ops.
(_bfd_elf_discard_section_eh_frame): Require skip_non_nops recognizes
all ops. If there are any DW_CFA_set_loc ops and they are pcrel
or going to be pcrel, compute set_loc array.
(_bfd_elf_eh_frame_section_offset): If make_relative, kill relocations
against DW_CFA_set_loc operands.
(_bfd_elf_write_section_eh_frame): Handle DW_CFA_set_loc adjusting.
* ld-elf/eh4.d: New test.
* ld-elf/eh4.s: New file.
* ld-elf/eh4a.s: New file.
2006-09-12 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3197
* elflink.c (elf_link_output_extsym): Compute bucket only if
needed.
ld/testsuite/
2006-09-12 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3197
* ld-elf/hash.d: New test.
2006-08-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3015
* elf.c (get_program_header_size): Add a PT_GNU_RELRO segment
only if there is a PT_DYNAMIC segment.
(_bfd_elf_map_sections_to_segments): Likewise.
(assign_file_positions_for_load_sections): Set PT_GNU_RELRO
segment alignment to 1.
ld/testsuite/
2006-08-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3015
* ld-elf/binutils.exp: Add tests for "-z relro".
PR 3052
* ldlang.h (lang_output_section_statement_type): Replace
"processed" field with "processed_vma" and "processed_lma".
* ldlang.c (lang_do_assignments_1): Move lma setting code..
(lang_size_sections_1): ..to here.
(lang_reset_memory_regions): Adjust for
lang_output_section_statement_type change.
* ldexp.c (fold_name): Likewise.
And this is something I forgot the check in from the previous patch.
ld/testsuite/
* ld-scripts/overlay-size-map.d: Adjust.
* coff-arm.c (coff_arm_rtype_to_howto) [COFF_WITH_PE]: Handle ARM_SECREL.
(coff_arm_reloc_type_lookup): Map BFD_RELOC_32_SECREL to ARM_SECREL.
* pe-arm.c [COFF_SECTION_ALIGNMENT_ENTRIES]: Define.
* pei-arm.c [TARGET_UNDERSCORE]: Define for ARM_WINCE like in pe-arm.c.
[COFF_SECTION_ALIGNMENT_ENTRIES]: Define.
* config/tc-arm.c: Move "dwarf2dbg.h" inclusion out of OBJ_ELF only block.
(pe_directive_secrel) [TE_PE]: New function.
(md_pseudo_table) [!OBJ_ELF]: Handle 2byte, 4byte, 8byte, file, loc, loc_mark_labels.
[TE_PE]: Handle secrel32.
(output_relax_insn): Remove OBJ_ELF around dwarf2_emit_insn call.
(output_inst): Remove OBJ_ELF around dwarf2_emit_insn call.
(arm_frob_label): Remove OBJ_ELF around dwarf2_emit_label call.
(md_section_align): Only round section sizes here for AOUT targets.
(tc_arm_regname_to_dw2regnum): Move out for OBJ_ELF only block.
(tc_pe_dwarf2_emit_offset): New function.
(md_apply_fix) [TE_PE]: Handle BFD_RELOC_32_SECREL.
(cons_fix_new_arm): Handle O_secrel.
* config/tc-arm.h : Move DWARF2_LINE_MIN_INSN_LENGTH, DWARF2_DEFAULT_RETURN_COLUMN and DWARF2_CIE_DATA_ALIGNMENT out of OBJ_ELF only block.
[TE_PE]: Define O_secrel, TC_DWARF2_EMIT_OFFSET, and declare tc_pe_dwarf2_emit_offset.
* ld-pe/pe.exp: Enable tests on arm-wince-pe.
* ld-pe/secrel.d: Adjust test to work on arm-wince-pe too.
2006-08-02 Richard Sandiford <richard@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
* config.bfd (sh-*-vxworks): Use bfd_elf32_shvxworks_vec and
bfd_elf32_shlvxworks_vec.
* configure.in (bfd_elf32_sh64_vec): Add elf-vxworks.lo.
(bfd_elf32_sh64l_vec, bfd_elf32_sh64lin_vec): Likewise.
(bfd_elf32_sh64blin_vec, bfd_elf32_sh64lnbsd_vec): Likewise.
(bfd_elf32_sh64nbsd_vec, bfd_elf32_sh_vec): Likewise.
(bfd_elf32_shblin_vec, bfd_elf32_shl_vec): Likewise.
(bfd_elf32_shl_symbian_vec, bfd_elf32_shlin_vec): Likewise.
(bfd_elf32_shlnbsd_vec, bfd_elf32_shnbsd_vec): Likewise.
(bfd_elf32_shlvxworks_vec, bfd_elf32_shvxworks_vec): New stanzas.
* configure: Regenerate.
* Makefile.am: Regenerate dependencies.
* Makefile.in: Regenerate.
* elf-vxworks.c (elf_vxworks_gott_symbol_p): New function.
(elf_vxworks_add_symbol_hook): Use it.
(elf_vxworks_link_output_symbol_hook): Likewise. Use the hash
table entry to check for weak undefined symbols and to obtain
the original bfd.
(elf_vxworks_emit_relocs): Use target_index instead of this_idx.
* elf32-sh-relocs.h: New file, split from elf32-sh.c.
(R_SH_DIR32): Use SH_PARTIAL32 for the partial_inplace field,
SH_SRC_MASK32 for the src_mask field, and SH_ELF_RELOC for the
special_function field.
(R_SH_REL32): Use SH_PARTIAL32 and SH_SRC_MASK32 here too.
(R_SH_REL32, R_SH_TLS_GD_32, R_SH_TLS_LD_32): Likewise.
(R_SH_TLS_LDO_32, R_SH_TLS_IE_32, R_SH_TLS_LE_32): Likewise.
(R_SH_TLS_DTPMOD32, R_SH_TLS_DTPOFF32, R_SH_TLS_TPOFF32): Likewise.
(R_SH_GOT32, R_SH_PLT32, R_SH_COPY, R_SH_GLOB_DAT): Likewise.
(R_SH_JMP_SLOT, R_SH_RELATIVE, R_SH_GOTOFF, R_SH_GOTPC): Likewise.
(SH_PARTIAL32, SH_SRC_MASK32, SH_ELF_RELOC): Undefine at end of file.
* elf32-sh.c: Include elf32-vxworks.h.
(MINUS_ONE): Define.
(sh_elf_howto_table): Include elf32-sh-relocs.h with SH_PARTIAL32
set to TRUE, SH_SRC_MASK32 set to 0xffffffff, and SH_ELF_RELOC set
to sh_elf_reloc.
(sh_vxworks_howto_table): New variable. Include elf32-sh-relocs.h
with SH_PARTIAL32 set to FALSE, SH_SRC_MASK32 set to 0, and
SH_ELF_RELOC set to bfd_elf_generic_reloc.
(vxworks_object_p, get_howto_table): New functions.
(sh_elf_reloc_type_lookup): Fix typo. Use get_howto_table.
(sh_elf_info_to_howto): Use get_howto_table.
(sh_elf_relax_section): Honor the partial_inplace field of the
R_SH_DIR32 howto.
(sh_elf_relax_delete_bytes): Likewise.
(elf_sh_plt_info): New structure.
(PLT_ENTRY_SIZE): Replace both definitions with...
(ELF_PLT_ENTRY_SIZE): ...this new macro, with separate definitions for
INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_entry_be): Update sizes of both definitions accordingly.
(elf_sh_plt0_entry_le): Likewise.
(elf_sh_plt_entry_be, elf_sh_plt_entry_le): Likewise.
(elf_sh_pic_plt_entry_be, elf_sh_pic_plt_entry_le): Likewise.
(elf_sh_plts): New structure, with separate definitions for
INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_entry): Delete both definitions.
(elf_sh_plt_entry, elf_sh_pic_plt_entry): Likewise.
(elf_sh_sizeof_plt, elf_sh_plt_plt0_offset): Likewise.
(elf_sh_plt_temp_offset, elf_sh_plt_symbol_offset): Likewise.
(elf_sh_plt_reloc_offset): Likewise.
(movi_shori_putval): Delete in favor of...
(install_plt_field): ...this new function, with separate definitions
for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(get_plt_info): New function, with separate definitions
for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_linker_offset, elf_sh_plt0_gotid_offset): Delete.
(VXWORKS_PLT_HEADER_SIZE, VXWORKS_PLT_ENTRY_SIZE): New macros.
(vxworks_sh_plt0_entry_be, vxworks_sh_plt0_entry_le): New constants.
(vxworks_sh_plt_entry_be, vxworks_sh_plt_entry_le): Likewise.
(vxworks_sh_pic_plt_entry_be, vxworks_sh_pic_plt_entry_le): Likewise.
(get_plt_index, get_plt_offset): New functions.
(elf_sh_link_hash_table): Add srelplt2, plt_info and vxworks_p fields.
(sh_elf_link_hash_table_create): Initialize them.
(sh_elf_create_dynamic_sections): Call
elf_vxworks_create_dynamic_sections for VxWorks.
(allocate_dynrelocs): Use htab->plt_info to get the size of PLT
entries. Allocate relocation entries in .rela.plt.unloaded if
generating a VxWorks executable.
(sh_elf_always_size_sections): New function.
(sh_elf_size_dynamic_sections): Extend .rela.plt handling to
.rela.plt.unloaded.
(sh_elf_relocate_section): Use get_howto_table. Honor
partial_inplace when calculating the addend for dynamic
relocations. Use get_plt_index.
(sh_elf_finish_dynamic_symbol): Use get_plt_index, install_plt_field
and htab->plt_info. Fill in the bra .plt offset for VxWorks
executables. Populate .rela.plt.unloaded. Do not make
_GLOBAL_OFFSET_TABLE_ absolute on VxWorks.
(sh_elf_finish_dynamic_sections): Use install_plt_field and
htab->plt_info. Handle cases where there is no special PLT header.
Populate the first relocation in .rela.plt.unloaded and fix up
the remaining entries.
(sh_elf_plt_sym_val): Use get_plt_info.
(elf_backend_always_size_sections): Define.
(TARGET_BIG_SYM, TARGET_BIG_NAME): Override for VxWorks.
(TARGET_LITTLE_SYM, TARGET_BIG_SYM): Likewise.
(elf32_bed, elf_backend_want_plt_sym): Likewise.
(elf_symbol_leading_char, elf_backend_want_got_underscore): Likewise.
(elf_backend_grok_prstatus, elf_backend_grok_psinfo): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing): Likewise.
(ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): Likewise.
* targets.c (bfd_elf32_shlvxworks_vec): Declare.
(bfd_elf32_shvxworks_vec): Likewise.
(_bfd_target_vector): Include bfd_elf32_shlvxworks_vec and
bfd_elf32_shvxworks_vec.
gas/
* config/tc-sh.c (apply_full_field_fix): New function.
(md_apply_fix): Use it instead of md_number_to_chars. Do not fill
in fx_addnumber for BFD_RELOC_32_PLT_PCREL.
(tc_gen_reloc): Use fx_addnumber rather than 0 as the default case.
* config/tc-sh.h (TARGET_FORMAT): Override for TE_VXWORKS.
ld/
2006-08-02 Richard Sandiford <richard@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* Makefile.am (ALL_EMULATIONS): Add eshelf_vxworks.o and
eshlelf_vxworks.o.
(eshelf_vxworks.c, eshlelf_vxworks.c): New rules.
* Makefile.in: Regenerate.
* configure.tgt (sh-*-vxworks): Use shelf_vxworks and
shlelf_vxworks.
* emulparams/shelf_vxworks.sh: New file.
* emulparams/shlelf_vxworks.sh: Likewise.
* emulparams/vxworks.sh (FINI): Prefix _etext with ${SYMPREFIX}.
(OTHER_END_SYMBOLS): Likewise _ehdr.
(DATA_END_SYMBOLS): Likewise _edata.
* emultempl/vxworks.em (vxworks_after_open): Check whether output_bfd
is indeed an ELF file before dealing with --force-dynamic.
ld/testsuite/
* ld-sh/rd-sh.exp: Treat vxworks1-static.d specially.
* ld-sh/sh-vxworks.exp: New file.
* ld-sh/sh.exp: Extend sh-linux SIZEOF_HEADERS handling to
sh-*-vxworks.
* ld-sh/vxworks1-le.dd, ld-sh/vxworks1-lib-le.dd,
* ld-sh/vxworks1-lib.dd, ld-sh/vxworks1-lib.nd,
* ld-sh/vxworks1-lib.rd, ld-sh/vxworks1-lib.s,
* ld-sh/vxworks1-static.d, ld-sh/vxworks1.dd,
* ld-sh/vxworks1.ld, ld-sh/vxworks1.rd, ld-sh/vxworks1.s,
* ld-sh/vxworks2-static.sd, ld-sh/vxworks2.s,
* ld-sh/vxworks2.sd, ld-sh/vxworks3-le.dd,
* ld-sh/vxworks3-lib-le.dd, ld-sh/vxworks3-lib.dd,
* ld-sh/vxworks3-lib.s, ld-sh/vxworks3.dd, ld-sh/vxworks3.s,
* ld-sh/vxworks4.d, ld-sh/vxworks4a.s, ld-sh/vxworks4b.s,
* ld-sh/reloc1.s, ld-sh/reloc1.d: New tests.
2006-07-12 H.J. Lu <hongjiu.lu@intel.com>
PR ld/2884
* elflink.c (_bfd_elf_merge_symbol): Copy the symbol info from
the old versioned dynamic definition to the new one with
non-default visibility. Hide the symbol if it is hidden or
internal.
ld/testsuite/
2006-07-12 H.J. Lu <hongjiu.lu@intel.com>
PR ld/2884
* ld-elf/begin.c: New file.
* ld-elf/end.c: Likewise.
* ld-elf/endhidden.c: Likewise.
* ld-elf/endprotected.c: Likewise.
* ld-elf/foo.c: Likewise.
* ld-elf/foo.map: Likewise.
* ld-elf/hidden.out: Likewise.
* ld-elf/main.c: Likewise.
* ld-elf/normal.out: Likewise.
* ld-elf/shared.exp: Likewise.
* lib/ld-lib.exp (run_cc_link_tests): New.
2006-07-12 Matthew R. Dempsky <mrd@alkemio.org>
* cpu-m68k.c (bfd_m68k_compatible): Handle CPU32.
ld/testsuite/
2006-07-12 Richard Sandiford <richard@codesourcery.com>
* ld-m68k/merge-ok-1c.d: New test.
* ld-m68k/m68k.exp: Run it.
bfd/
* elf32-arm.c (elf32_arm_swap_symbol_out): Don't set low
bit for undefined symbols.
ld/testsuite
* ld-arm/arm-elf.exp: New test.
* ld-arm/use-thumb-lib.s: New file.
* ld-arm/use-thumb-lib.sym: New file.
bfd/
* elf32-arm.c (elf32_arm_swap_symbol_out): Don't set low
bit for undefined symbols.
ld/testsuite
* ld-arm/arm-elf.exp: New test.
* ld-arm/use-thumb-lib.s: New file.
* ld-arm/use-thumb-lib.sym: New file.
to R_ARM_LDC_SB_G{0,1,2} respectively.
bfd/
* bfd-in2.h: Regenerate.
* elf32-arm.c (R_ARM_ALU_PC_G0_NC, R_ARM_ALU_PC_G0,
R_ARM_ALU_PC_G1_NC, R_ARM_ALU_PC_G1, R_ARM_ALU_PC_G2,
R_ARM_LDR_PC_G1, R_ARM_LDR_PC_G2, R_ARM_LDRS_PC_G0,
R_ARM_LDRS_PC_G1, R_ARM_LDRS_PC_G2, R_ARM_LDC_PC_G0,
R_ARM_LDC_PC_G1, R_ARM_LDC_PC_G2, R_ARM_ALU_SB_G0_NC,
R_ARM_ALU_SB_G0, R_ARM_ALU_SB_G1_NC, R_ARM_ALU_SB_G1,
R_ARM_ALU_SB_G2, R_ARM_LDR_SB_G0, R_ARM_LDR_SB_G1,
R_ARM_LDR_SB_G2, R_ARM_LDRS_SB_G0, R_ARM_LDRS_SB_G1,
R_ARM_LDRS_SB_G2, R_ARM_LDC_SB_G0, R_ARM_LDC_SB_G1,
R_ARM_LDC_SB_G2): New relocation types.
(R_ARM_PC13): Rename to AAELF name R_ARM_LDR_PC_G0 and
adjust HOWTO entry to be consistent with R_ARM_LDR_PC_G1
and friends.
(elf32_arm_howto_table_3): Delete; contents merged into
elf32_arm_howto_table_2.
(elf32_arm_howto_from_type): Adjust correspondingly.
(elf32_arm_reloc_map): Extend with the above relocations.
(calculate_group_reloc_mask): New function.
(identify_add_or_sub): New function.
(elf32_arm_final_link_relocate): Support for the above
relocations.
* reloc.c: Add enumeration entries for BFD_RELOC_ARM_...
codes to correspond to the above relocations.
gas/
* config/tc-arm.c (enum parse_operand_result): New.
(struct group_reloc_table_entry): New.
(enum group_reloc_type): New.
(group_reloc_table): New array.
(find_group_reloc_table_entry): New function.
(parse_shifter_operand_group_reloc): New function.
(parse_address_main): New function, incorporating code
from the old parse_address function. To be used via...
(parse_address): wrapper for parse_address_main; and
(parse_address_group_reloc): new function, likewise.
(enum operand_parse_code): New codes OP_SHG, OP_ADDRGLDR,
OP_ADDRGLDRS, OP_ADDRGLDC.
(parse_operands): Support for these new operand codes.
New macro po_misc_or_fail_no_backtrack.
(encode_arm_cp_address): Preserve group relocations.
(insns): Modify to use the above operand codes where group
relocations are permitted.
(md_apply_fix): Handle the group relocations
ALU_PC_G0_NC through LDC_SB_G2.
(tc_gen_reloc): Likewise.
(arm_force_relocation): Leave group relocations for the linker.
(arm_fix_adjustable): Likewise.
gas/testsuite/
* gas/arm/group-reloc-alu.d: New test.
* gas/arm/group-reloc-alu-encoding-bad.d: New test.
* gas/arm/group-reloc-alu-encoding-bad.l: New test.
* gas/arm/group-reloc-alu-encoding-bad.s: New test.
* gas/arm/group-reloc-alu-parsing-bad.d: New test.
* gas/arm/group-reloc-alu-parsing-bad.l: New test.
* gas/arm/group-reloc-alu-parsing-bad.s: New test.
* gas/arm/group-reloc-alu.s: New test.
* gas/arm/group-reloc-ldc.d: New test.
* gas/arm/group-reloc-ldc-encoding-bad.d: New test.
* gas/arm/group-reloc-ldc-encoding-bad.l: New test.
* gas/arm/group-reloc-ldc-encoding-bad.s: New test.
* gas/arm/group-reloc-ldc-parsing-bad.d: New test.
* gas/arm/group-reloc-ldc-parsing-bad.l: New test.
* gas/arm/group-reloc-ldc-parsing-bad.s: New test.
* gas/arm/group-reloc-ldc.s: New test.
* gas/arm/group-reloc-ldr.d: New test.
* gas/arm/group-reloc-ldr-encoding-bad.d: New test.
* gas/arm/group-reloc-ldr-encoding-bad.l: New test.
* gas/arm/group-reloc-ldr-encoding-bad.s: New test.
* gas/arm/group-reloc-ldr-parsing-bad.d: New test.
* gas/arm/group-reloc-ldr-parsing-bad.l: New test.
* gas/arm/group-reloc-ldr-parsing-bad.s: New test.
* gas/arm/group-reloc-ldr.s: New test.
* gas/arm/group-reloc-ldrs.d: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.d: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.l: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.s: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.d: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.l: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.s: New test.
* gas/arm/group-reloc-ldrs.s: New test.
ld/testsuite/
* ld-arm/group-relocs-alu-bad.d: New test.
* ld-arm/group-relocs-alu-bad.s: New test.
* ld-arm/group-relocs.d: New test.
* ld-arm/group-relocs-ldc-bad.d: New test.
* ld-arm/group-relocs-ldc-bad.s: New test.
* ld-arm/group-relocs-ldr-bad.d: New test.
* ld-arm/group-relocs-ldr-bad.s: New test.
* ld-arm/group-relocs-ldrs-bad.d: New test.
* ld-arm/group-relocs-ldrs-bad.s: New test.
* ld-arm/group-relocs.s: New test.
* ld-arm/arm-elf.exp: Wire in new tests.
* elf32-mips.c: Expand comment about ABI-mandated pagesize values.
(ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): define in a more obvious way.
* elf64-mips.c, elfn32-mips.c (ELF_MAXPAGESIZE): Fix value for IRIX6.
Delete old comments.
(ELF_COMMONPAGESIZE): Define in a more obvious way.
[ ld/ChangeLog ]
* emulparams/elf64bmip.sh, emulparams/elf64btsmip.sh (COMMONPAGESIZE):
Define.
[ ld/testsuite/ChangeLog ]
* ld-mips-elf/multi-got-no-shared.d: Adjust for recent change of
ELF_MAXPAGESIZE.
* elfxx-mips.c (mips_elf_link_hash_table): Add function_stub_size.
(STUB_ORI): New macro.
(STUB_LI16U): Fix formatting.
(MIPS_FUNCTION_STUB_SIZE): Delete.
(MIPS_FUNCTION_STUB_MAX_SIZE): Likewise.
(MIPS_FUNCTION_STUB_NORMAL_SIZE): New macro.
(MIPS_FUNCTION_STUB_BIG_SIZE): Likewise.
(_bfd_mips_elf_adjust_dynamic_symbol): Use htab->function_stub_size
instead of MIPS_FUNCTION_STUB_SIZE.
(count_section_dynsyms): New function, split out from
_bfd_mips_elf_final_link.
(_bfd_mips_elf_always_size_sections): Get a worst-case estimate
of the number of dynamic symbols needed and use it to set up
function_stub_size. Use function_stub_size rather than
MIPS_FUNCTION_STUB_SIZE to determine the size of the stub section.
Use 16-byte stubs for 0x10000 dynamic symbols.
(_bfd_mips_elf_size_dynamic_sections): Use htab->function_stub_size
instead of MIPS_FUNCTION_STUB_SIZE. Fix formatting.
(_bfd_mips_elf_finish_dynamic_symbol): Likewise. Change the
size of the stub buffer from MIPS_FUNCTION_STUB_MAX_SIZE to
MIPS_FUNCTION_STUB_BIG_SIZE. Tweak the check for unhandled dynindxes.
Use MIPS_FUNCTION_STUB_BIG_SIZE rather than a hard-coded 20.
Use STUB_ORI rather than STUB_LI16U for big stubs.
(_bfd_mips_elf_link_hash_table_create): Initialize function_stub_size.
(_bfd_mips_elf_final_link): Use count_section_dynsyms.
ld/testsuite/
* ld-mips-elf/stub-dynsym-1.s,
* ld-mips-elf/stub-dynsym-1.ld,
* ld-mips-elf/stub-dynsym-1-7fff.d,
* ld-mips-elf/stub-dynsym-1-8000.d,
* ld-mips-elf/stub-dynsym-1-fff0.d,
* ld-mips-elf/stub-dynsym-1-10000.d,
* ld-mips-elf/stub-dynsym-1-2fe80.d: New test.
* ld-mips-elf/mips-elf.exp: Run it.
PR ld/2723
* elflink.c (bfd_elf_final_link): Don't output section symbols
for special ELF sections.
ld/testsuite/
Update for removal of some section syms.
* elflink.c (_bfd_elf_add_dynamic_entry): Remove DT_TEXTREL
check.
(bfd_elf_final_link): Add a late DT_TEXTREL check.
* elfxx-mips.c (MIPS_ELF_READONLY_SECTION): Define.
(mips_elf_create_dynamic_relocation): Set DF_TEXTREL.
(_bfd_mips_elf_check_relocs): Delete MIPS_READONLY_SECTION.
Use MIPS_ELF_READONLY_SECTION.
(_bfd_mips_elf_size_dynamic_sections): Clear DF_TEXTREL after
creating DT_TEXTREL.
(_bfd_mips_elf_finish_dynamic_sections): Clear textrel markers
if no text relocations were generated.
ld/testsuite/
* ld-mips-elf/textrel-1.d: Relax some patterns.
