gcc:
* config/sh/sh.h (EXTRA_SPECS): Add subtarget_asm_relax_spec and
subtarget_asm_isa_spec.
(SUBTARGET_ASM_RELAX_SPEC, SUBTARGET_ASM_ISA_SPEC): Define.
(ASM_SPEC): Define as SH_ASM_SPEC.
(SH_ASM_SPEC): New; take the role of ASM_SPEC, but safe from svr4.h.
Use subtarget_asm_relax_spec and subtarget_asm_isa_spec.
* config/sh/elf.h (ASM_SPEC): Use SH_ASM_SPEC.
(SUBTARGET_ASM_ISA_SPEC): Undef / define.
gcc/testsuite:
gcc.dg/sh-relax.c: New test.
include/elf:
* sh.h (EF_SH_MERGE_MACH): Make sure SH2E & SH3/SH3E merge to SH3E,
and SH2E & SH4 merge to SH4, not SH2E.
gas:
* config/tc-sh.c (sh_dsp): Replace with preset_target_arch.
(md_begin): Use preset_target_arch.
(md_longopts): Make isa option unconditional.
(md_parse_option): Make OPTION_DSP and OPTION_ISA sh4 / any
set preset_target_arch.
(md_apply_fix3): If BFD_ASSEMBLER, adjust SWITCH_TABLE fixups
by -S_GET_VALUE (fixP->fx_subsy).
(tc_gen_reloc): For SWITCH_TABLE fixups, the symbol is fixp->fx_subsy,
and the addend is 0.
Adjust addend of R_SH_IND12W relocations by fixp->fx_offset - 4.
* config/tc-sh.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
bfd:
elf32-sh.c (sh_elf_howto_tab): Make R_SH_IND12W into an ordinary
relocation (no special function), and make it non-partial_inplace.
(sh_elf_relax_section): When creating a bsr, use a consistent value
no matter if the symbol is extern or not; set addend to -4.
Don't swap load / non-load instructions for SH4.
(sh_elf_relax_delete_bytes): In R_SH_IND12W case, check the offset
rather than if the symbol is external to determine if adjusting the
offset makes sense. Adjust the addend too if appropriate.
(sh_elf_relocate_section): In R_SH_IND12W, don't fiddle with the
relocation.
* config/tc-mcore.c (md_begin): Use a const iterator. Don't
coalesce the name fields to use the same pointer.
* config/tc-sh.c (md_begin): Use a const iterator. Don't coalesce
the name fields to use the same pointer.
(get_specific): Check for opcodes with the same name using strcmp
as well as comparing the pointer.
(sh_force_relocation): Use sh_local_pcrel.
(md_pcrel_from_section): Check the relocation type whether it
should be resolved locally. Use S_FORCE_RELOC.
* testsuite/gas/sh/pcrel2.d: Check code also.
* config/tc-sh.c (sh_force_relocation): Return 0 for
some PC relative relocations when not relaxing.
* testsuite/gas/sh/pcrel2.s: New.
* testsuite/gas/sh/pcrel2.d: New.
* testsuite/gas/sh/basic.exp: Add pcrel2 test.
2002-02-08 Alexandre Oliva <aoliva@redhat.com>
Stephen Clarke <Stephen.Clarke@st.com>
* doc/c-sh64.texi: Fix citation of SH64 architecture manual.
2002-01-31 Alexandre Oliva <aoliva@redhat.com>
* config/tc-sh.c (md_relax_table): Added default sizes for
non-PC-relative UNDEF_MOVI, and relaxation sequences for
MOVI_16, MOVI_32 and MOVI_48.
* config/tc-sh64.c (shmedia_md_apply_fix3): Fix warning.
(shmedia_md_convert_frag): Handle non-PC-relative UNDEF_MOVI
and MOVI_16.
(shmedia_md_estimate_size_before_relax): Remove redundant
blocks. Set fragP->fr_var even if relaxation type unchanged.
Retain UNDEF_MOVI until expression decays to number.
2002-01-24 Alexandre Oliva <aoliva@redhat.com>
* config/tc-sh64.c (shmedia_init_reloc): Handle new SHmedia PIC
relocation types. Take fixP->fx_addnumber into account too.
(shmedia_md_apply_fix): Likewise.
(shmedia_md_convert_frag): Likewise.
(shmedia_build_Mytes): Likewise.
(sh64_consume_datalabel): Complain about nested datalabel.
Support PIC relocs. Call sh_parse_name.
* config/tc-sh64.h (TC_RELOC_RTSYM_LOC_FIXUP): Extend definition
in tc-sh.h to SHmedia reloc types.
* config/tc-sh.c (SH64PCRELPLT, MOVI_PLT, MOVI_GOTOFF,
MOVI_GOTPC): New relaxation constants.
(md_relax_table): Introduce relaxation directives for PIC-related
constants.
(sh_PIC_related_p): Handle datalabel.
(sh_check_fixup): Choose SH5 PIC relocations.
(sh_cons_fix_new): Added BDF_RELOC_64.
(md_apply_fix3, sh_parse_name): Handle GOTPLT.
2002-01-18 Alexandre Oliva <aoliva@redhat.com>
* config/tc-sh64.c (sh64_max_mem_for_rs_align_code): If the
current ISA is SHmedia, get 7 bytes.
2001-11-28 Nick Clifton <nickc@cambridge.redhat.com>
* config/tc-sh.c (md_apply_fix3): Treat shmedia_md_apply_fix3 as a
void function.
* config/tc-sh64.c (shmedia_apply_fix): Rename to
shmedia_apply_fix3 and make void.
2001-05-17 Alexandre Oliva <aoliva@redhat.com>
* config/tc-sh64.c (s_sh64_abi): Remove unused arguments passed to
as_bad.
2001-04-12 Alexandre Oliva <aoliva@redhat.com>
* config/tc-sh64.h (md_parse_name): Take &c as argument.
2001-03-14 DJ Delorie <dj@redhat.com>
* doc/Makefile.am (CPU_DOCS): Added c-sh64.texi
* doc/Makefile.in(CPU_DOCS): Ditto.
* doc/c-sh64.texi: New file.
* doc/as.texinfo: Add SH64 support.
2001-03-13 DJ Delorie <dj@redhat.com>
* config/tc-sh64.c (shmedia_get_operands): Rename A_RESV_Fx to
A_REUSE_PREV so that its purpose is more obvious.
(shmedia_build_Mytes): Ditto.
2001-03-07 DJ Delorie <dj@redhat.com>
* config/tc-sh64.c (sh64_vtable_entry): New, strip datalabels
before processing.
(sh64_vtable_inherit): Ditto.
(strip_datalabels): New, strip "datalabel" from given line.
* config/tc-sh.c (md_pseudo_table): Add sh64-specific vtable
pseudos.
2001-03-06 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (shmedia_md_assemble): Move dwarf2_emit_insn
call ...
(shmedia_build_Mytes): ... to here.
2001-03-06 DJ Delorie <dj@redhat.com>
* config/tc-sh.c: Remove sh64-specific uaquad now that there
is a generic one.
2001-01-21 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.h (DWARF2_LINE_MIN_INSN_LENGTH): Override.
* config/tc-sh64.c (shmedia_md_assemble): Offset recorded insn
address by one in call to dwarf2_emit_insn.
2001-01-13 Hans-Peter Nilsson <hpn@cygnus.com>
Implement ".abi" pseudo and correct .cranges descriptors. Correct
alignment handling broken by imported changes.
* config/tc-sh64.h (HANDLE_ALIGN): Override definition in tc-sh.h.
(sh64_handle_align): Declare.
(MAX_MEM_FOR_RS_ALIGN_CODE): Override definition in tc-sh.h.
(sh64_max_mem_for_rs_align_code): Declare.
(enum sh64_isa_values): Moved here from tc-sh64.c.
(md_do_align): Define.
(sh64_do_align): Declare.
(struct sh64_tc_frag_data): New.
(TC_FRAG_TYPE): Change to struct sh64_tc_frag_data. Users
changed.
(TC_FRAG_INIT): Change to set new datatype.
(struct sh64_segment_info_type): Rename member
last_flushed_location to last_contents_mark. All users changed.
(md_elf_section_change_hook, TC_CONS_FIX_NEW): Do not define.
(shmedia_elf_new_section, sh64_tc_cons_fix_new): Do not prototype.
* config/tc-sh.c (md_pseudo_table): Add ".abi".
(sh_elf_cons) [HAVE_SH64]: Call sh64_update_contents_mark instead
of unsetting seen_insn.
(md_assemble) [HAVE_SH64] <before new SHcompact sequence>: Also
call sh64_update_contents_mark.
(sh_handle_align): Remove HAVE_SH64-conditioned code.
* config/tc-sh64.c (sh64_isa_mode): Correct type from boolean to
enum sh64_isa_values.
(sh64_set_contents_type): Drop segT parameter. All callers changed.
(emitting_crange): Boolean guard moved to file scope from function
scope in sh64_set_contents_type.
(s_sh64_abi): New.
(sh64_update_contents_mark): New; most split out from
sh64_flush_pending_output.
(shmedia_md_end): Call sh64_update_contents_mark. Set
sh64_isa_mode to sh64_isa_sh5_guard unless sh64_isa_unspecified.
(sh64_do_align): New function.
(sh64_max_mem_for_rs_align_code): New function.
(sh64_handle_align): Rename from shmedia_do_align. Make
non-static. Add head comment. Emit zero bytes for n bytes modulo
four. Change return-type to void.
(shmedia_elf_new_section): Remove.
(shmedia_md_assemble): Call sh64_update_contents_mark.
(s_sh64_mode): Ditto. Do not call md_flush_pending_output. Make
new frag. Call sh64_update_contents_mark after making the new
frag.
(sh64_flush_pending_output): Just call sh64_update_contents_mark
and sh_flush_pending_output.
(sh64_flag_output): Also call md_flush_pending_output, but add
condition on not emitting_crange.
(sh64_tc_cons_fix_new): Remove.
2001-01-12 Nick Clifton <nickc@redhat.com>
* config/tc-sh64.c (shmedia_do_align): Fix to work with new
alignment handling scheme imported from sourceware.
2001-01-12 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.h (TARGET_FORMAT): Define.
(sh64_target_format): Prototype.
* config/tc-sh64.c (sh64_target_mach): New function.
2001-01-07 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (shmedia_md_end): When equating a symbol, use
zero_address_frag instead of copying the frag of the symbol.
(shmedia_frob_file_before_adjust): Ditto.
(shmedia_md_apply_fix) <case BFD_RELOC_SH_IMM_MEDLOW16>: Cast mask
to valueT to remove signedness.
(shmedia_md_convert_frag): Add parameter final. Rename parameter
headers to output_bfd. Do not evaluate symbols if final is false;
do emit fixups.
(shmedia_md_estimate_size_before_relax) <case C (MOVI_IMM_32,
UNDEF_MOVI) et al>: If symbol cannot be modified to be PC-relative
to the current frag, call shmedia_md_convert_frag to emit fixups
and make frag_wane neutralize the frag. Update comments.
* config/tc-sh.c (md_convert_frag): Change caller of
shmedia_md_convert_frag.
2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.h: Tweak comments and correct formatting.
* config/tc-sh64.c: Ditto.
(shmedia_md_convert_frag) <PT/PTA/PTB 32, 48 and 64 bit
expansion, MOVI pcrel expansion>: Fix thinko calculating offset
for the no-relocation case.
(shmedia_check_limits): Fix range check being off-by-one for PTA.
* config/tc-sh.c: Ditto. Add proper comments to #ifdef/#ifndef
wrappers.
(SH64PCREL16_F): Increment for proper max-PTA handling. Update
comment.
(SH64PCREL16_M, MOVI_16_M): Correct range thinko.
(SH64PCREL48_M, MOVI_48_M): Similar; don't count in length of
expansion.
(SH64PCREL32_M, MOVI_32_M): Ditto; handle overflowing expression.
Correct comment.
2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (shmedia_md_apply_fix) <second switch, case
BFD_RELOC_SH_PT_16>: Set lowest bit in field to be relocated to 1.
(shmedia_md_convert_frag) <case C (SH64PCREL16_32, SH64PCREL16) et
al>: Set lowest bit of field to relocate to 1 and rest to empty,
if reloc is emitted.
2000-12-31 Hans-Peter Nilsson <hpn@cygnus.com>
New options plus bugfixes.
* config/tc-sh.c (md_longopts): New options "-no-expand" and
"-expand-pt32".
(md_parse_option): Handle new options.
(md_show_usage): Add blurb for new options.
* config/tc-sh64.c (SHMEDIA_BFD_RELOC_PT): New macro.
(sh64_expand, sh64_pt32): New variables.
(shmedia_init_reloc): Handle BFD_RELOC_SH_PT_16.
(shmedia_md_apply_fix): Hold original fixP->fx_r_type in
orig_fx_r_type. Change SHMEDIA_BFD_RELOC_PT into
BFD_RELOC_SH_PT_16. Handle BFD_RELOC_SH_PT_16 as pc-relative.
<resolved previously-pc-relative relocs>: Handle
SHMEDIA_BFD_RELOC_PT and BFD_RELOC_SH_PT_16.
(shmedia_md_convert_frag) <case C (SH64PCREL16PT_64, SH64PCREL16),
case C (SH64PCREL16PT_32, SH64PCREL16)>: Modify to PTB if operand
points to SHcompact code.
<case C (SH64PCREL16_32, SH64PCREL16), case C (SH64PCREL16_64,
SH64PCREL16)>: Check that ISA of what operand points at and
PTA/PTB matches, or emit error.
(shmedia_check_limits): Handle BFD_RELOC_SH_PT_16 and
SHMEDIA_BFD_RELOC_PT.
(shmedia_immediate_op): If pcrel, emit fixup also for constant
operand.
(shmedia_build_Mytes) <case A_IMMS16>: Also check sh64_expand in
condition for MOVI expansion.
<case A_PCIMMS16BY4>: Handle expansion to 32 bits only, if
sh64_pt32. Emit only a BFD_RELOC_SH_PT_16 fixup if not
sh64_expand.
<case A_PCIMMS16BY4_PT>: Likewise, but emit a SHMEDIA_BFD_RELOC_PT
fixup.
(sh64_target_format): Error-check setting of sh64_pt32 and
sh64_expand. Fix typo in check for sh64_shcompact_const_crange.
(shmedia_md_pcrel_from_section): Handle BFD_RELOC_SH_PT_16 and
SHMEDIA_BFD_RELOC_PT as coming from SHmedia code.
2000-12-31 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c: Improve comments.
(shmedia_md_convert_frag): Remove inactive is_pt_variant code. Do
not say the linker will check correctness of PTA/PTB expansion.
(shmedia_md_end): Make non-static.
* config/tc-sh64.h (md_end): Define to shmedia_md_end. Add
prototype.
* config/tc-sh.c (sh_finalize): Remove.
* config/tc-sh.h (md_end): Do not define.
Remove prototype for sh_finalize.
2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (shmedia_frob_section_type): Use a struct
sh64_section_data container when storing section type in tdata
field in elf_section_data.
* config/tc-sh.c (sh_elf_final_processing): Change from EF_SH64 to
EF_SH5.
* Makefile.am: Update dependencies.
* Makefile.in: Regenerate.
2000-12-22 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (shmedia_md_assemble): Don't protect
dwarf2_emit_insn call with test on debug_type.
2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (sh64_set_contents_type): Make contents-type
CRT_SH5_ISA32 sticky for 64-bit.
2000-12-18 Hans-Peter Nilsson <hpn@cygnus.com>
Generate .crange sections when switching ISA mode or emitting
constants in same section as code.
* config/tc-sh64.c: Reformat structure definitions.
(sh64_end_of_assembly, sh64_mix, sh64_shcompact_const_crange): New
variables.
(sh64_set_contents_type): Rename from sh64_init_section. Rewrite
to emit a .cranges descriptor when contents type changes. Only
emit error if changing contents type and -no-mix is in effect.
(sh64_emit_crange, sh64_flush_last_crange, sh64_flag_output,
sh64_flush_pending_output, sh64_tc_cons_fix_new): New functions.
(shmedia_md_end): Set sh64_end_of_assembly. Pass
sh64_flush_last_crange over sections.
When checking main symbol of datalabel symbol, check for
STO_SH5_ISA32, not ISA type of section in definition.
(shmedia_frob_file_before_adjust): Check main symbol for
STO_SH5_ISA32; don't check ISA type of section in definition.
(shmedia_frob_section_type): Adjust for .cranges; set section flag
to SHF_SH5_ISA32_MIXED or SHF_SH5_ISA32 according to whether
.cranges entries have been output.
(shmedia_elf_new_section): Just call md_flush_pending_output.
(shmedia_md_assemble): Do not emit a BFD_RELOC_SH_SHMEDIA_CODE
fix. Do not set tc_segment_info_data.in_code for section. Call
sh64_set_contents_type for SHmedia code.
(s_sh64_mode): Do not call sh64_init_section or set seen_insn to
false. Call md_flush_pending_output.
(sh64_target_format): Check that -no-mix and
-shcompact-const-crange are used in sane combination with other
options.
(shmedia_md_pcrel_from_section): Check type of fix for how to
adjust pc-relative.
(sh64_consume_datalabel): Check symbol for having STO_SH5_ISA32,
not ISA type of section in definition.
* config/tc-sh64.h (struct sh64_segment_info_type): Rewrite to
hold contents-type state.
(md_flush_pending_output): Redefine to sh64_flush_pending_output.
(sh64_flush_pending_output): Declare.
(TC_CONS_FIX_NEW): Define to sh64_tc_cons_fix_new.
(sh64_tc_cons_fix_new): Declare.
* config/tc-sh.c (sh_elf_cons) [HAVE_SH64]: Unset seen_insn and
call sh64_flag_output.
(md_assemble) [HAVE_SH64]: Do not emit BFD_RELOC_SH_CODE. Just
call sh64_set_contents_type to mark SHcompact code and set
seen_insn.
(md_longopts): New options "-no-mix" and
"-shcompact-const-crange".
(md_parse_option): Handle new options.
(md_show_usage): Add blurb for new options.
(md_number_to_chars) [HAVE_SH64]: Call sh64_flag_output.
2000-12-15 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c: Delete investigated and obsolete fixme:s.
(sh64_last_insn_frag): New.
(shmedia_md_convert_frag): Use tc_frag_data field of incoming frag
to get frag for insn opcode for generating fixups; do not assume it
is the same frag.
(shmedia_build_Mytes): Set sh64_last_insn_frag after growing frag
for new insn.
* config/tc-sh64.h (ELF_TC_SPECIAL_SECTIONS): Define for .cranges
section.
(TC_FRAG_TYPE): Define as fragS *.
(TC_FRAG_INIT): Define to set tc_frag_data to sh64_last_insn_frag.
(sh64_last_insn_frag): Declare.
(sh64_consume_datalabel): Fix typo; check for seginfo != NULL,
not == NULL before dereferencing.
2000-12-12 Hans-Peter Nilsson <hpn@cygnus.com>
Get rid of BFD section flag and EF_SH64_ABI64.
* config/tc-sh64.c (shmedia_frob_section_type): Use
elf_section_data (sec)->tdata, not a specific BFD section flag, to
communicate the section as containing SHmedia code. Describe why.
* config/tc-sh.c (sh_elf_final_processing): Tweak comment. Set
EF_SH64 regardless of ABI.
* config/tc-sh64.c (shmedia_md_apply_fix): Decapitalize "invalid"
in error message. Handle resolved expressions for
BFD_RELOC_SH_IMMS10, BFD_RELOC_SH_IMMS10BY2,
BFD_RELOC_SH_IMMS10BY4 and BFD_RELOC_64.
(shmedia_check_limits): Handle BFD_RELOC_64.
(sh64_adjust_symtab): Do not decrement the GAS symbol value for
a STO_SH5_ISA32 symbol, only the BFD value.
2000-12-11 Ben Elliston <bje@redhat.com>
* config/tc-sh64.c: Call dwarf2_emit_insn, not the defunct
dwarf2_generate_asm_lineno.
2000-12-11 Hans-Peter Nilsson <hpn@cygnus.com>
Handle PC-relative MOVI expansions with assembler relaxation.
Generate PC-relative relocs from 16-bit PC-relative expressions.
* config/tc-sh64.c (SHMEDIA_MD_PCREL_FROM_FIX): Break out from...
(shmedia_md_pcrel_from_section): ...here.
(shmedia_md_apply_fix): Handle fixups for 16-bit operands that has
turned completely resolved. Adjust relocation type for 16-bit
immediate operands that has turned PC-relative. Adjust back for
MD_PCREL_FROM_SECTION being applied twice.
(shmedia_md_convert_frag): Always emit reloc for expression with
global or weak symbol. Handle relaxation result for PC-relative
expressions.
(shmedia_md_estimate_size_before_relax): An expression with a weak
or global symbol can not be relaxed. Break out tests for
relaxable symbol into variable sym_relaxable.
<cases C (MOVI_IMM_64, UNDEF_MOVI) and C (MOVI_IMM_32,
UNDEF_MOVI)>: Break out any PC-relative expression and change
relaxation type.
(shmedia_build_Mytes): CSE &operands->operands[j] into variable
opjp.
<case A_IMMS16>: Fix typo for initial minor relaxation type of
MOVI expansion. If X_op_symbol of the immediate expression is
set, make an expression symbol for the argument to frag_var.
* config/tc-sh.c (MOVI_IMM_32_PCREL, MOVI_IMM_64_PCREL): New
relaxations.
(END): Adjust for new relaxations.
(md_relax_table): Add entries for new relaxations.
2000-12-07 Ben Elliston <bje@redhat.com>
* config/tc-sh64.c (shmedia_parse_reg): Initialize variable len.
2000-12-07 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (shmedia_md_convert_frag): Correct all MOVI and
SHORI operand offsets in PT/PTA/PTB expansions.
2000-12-05 Hans-Peter Nilsson <hpn@cygnus.com>
Implement DataLabel semantics.
* config/tc-sh.c (sh_frob_file) [HAVE_SH64]: Call
shmedia_frob_file_before_adjust.
* config/tc-sh64.c [! OBJ_ELF]: Emit #error.
(DATALABEL_SUFFIX): Define.
(shmedia_md_end) <before adjusting STO_SH5_ISA32 symbols>: Walk
symbol list to update "datalabel" symbols to their main symbol
counterparts.
(shmedia_frob_file_before_adjust): New.
(sh64_adjust_symtab): For remaining datalabel symbols, set to
undefined and set STT_DATALABEL.
(sh64_frob_label): Initialize TC symbol field.
(sh64_consume_datalabel): Actually implement semantics. New
parameter operandf, call it instead of expression.
(sh64_exclude_symbol): New.
* config/tc-sh64.h (md_parse_name): Pass on the function operand
to sh64_consume_datalabel.
(tc_symbol_new_hook): Define to tc_frob_symbol.
(TC_SYMFIELD_TYPE): Define to symbolS *.
(tc_frob_symbol): Define to call sh64_exclude_symbol.
2000-12-01 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (shmedia_init_reloc): Tweak comment for default
case.
(shmedia_md_assemble): Call dwarf2_generate_asm_lineno if
generating dwarf2 debug information.
2000-11-30 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (sh64_target_format): Use elf64-sh64l and
elf64-sh64 for the 64-bit ABI.
* config/tc-sh.c (md_show_usage): Tweak usage output for -abi=*
option.
2000-11-29 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh.c: Remove conditionalizing on HAVE_SH64 for
case-insensitivity.
2000-11-27 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c: Tweak comments, formatting and error messages.
(enum sh64_abi_values): New type.
(enum sh64_isa_values): New type.
(sh64_isa_mode): Replace shmedia_mode. All referers changed.
(seen_shcompact_mode, seen_shmedia_mode): Delete.
(sh64_abi): Replace shmedia_64.
(shmedia_md_convert_frag) <C (MOVI_IMM_64, MOVI_64),
C (MOVI_IMM_32, MOVI_32)>: Correct register number handling.
(s_sh64_mode): Check validity for this target.
(sh64_target_format): Initialize defaults for ISA and ABI.
Fallback to old object format if no SH64 ISA or ABI has been
specified.
* config/tc-sh.c (md_parse_option): Check combinations for errors.
(sh_elf_final_processing): Change to have EF_SH64_ABI64 for 64-bit
ABI and EF_SH64 for 32-bit ABI, if SH64 options are specified.
* config/tc-sh64.h: Fix typo in comment.
2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (shmedia_md_estimate_size_before_relax)
<PT fixups for absolute values>: Size will be longest, not
shortest.
(shmedia_md_convert_frag): Disable PTB-warning machinery. Correct
all MOVI and SHORI operand offsets in PT/PTA/PTB expansions.
* config/tc-sh.c (parse_reg) [HAVE_SH64]: Add local variables l0
and l1 to hold lowercase of two first characters. Change all
remaining TO_LOWER to tolower.
* config/tc-sh64.c (TO_LOWER): Delete.
(shmedia_find_cooked_opcode): Use tolower, not TO_LOWER.
(md_parse_name): Define.
(sh64_consume_datalabel): Declare.
(DOLLAR_DOT): Define.
* config/tc-sh64.c (shmedia_parse_exp): New.
(sh64_consume_datalabel): New; just ignoring datalabel semantics.
(shmedia_parse_reg): Remove const from src
parameter.
(shmedia_get_operands): Ditto for args parameter and ptr variable.
(shmedia_md_assemble): Ditto for op_end variable.
(shmedia_get_operand): Ditto for ptr parameter and src variable.
Use shmedia_parse_exp, not parse_exp.
* config/tc-sh64.c (shmedia_parse_reg): Add shmedia_arg_type
parameter. All callers changed.
(shmedia_get_operand): Add shmedia_arg_type parameter. All
callers changed.
(shmedia_parse_reg): Put first two character in local variables.
Use tolower, not TO_LOWER. If no register is found and argtype
indicates a control register, scan shmedia_creg_table
case-insensitive.
2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
* Makefile.am (CPU_TYPES): Add sh64.
(TARGET_CPU_CFILES): Add config/tc-sh64.c.
(TARGET_CPU_HFILES): Add config/tc-sh64.h.
Regenerate dependencies.
* Makefile.in: Regenerate.
* configure.in: Add support for sh64-*-elf*.
* configure: Regenerate.
* config/tc-sh64.h: New.
* config/tc-sh64.c: New.
* config/tc-sh.c (md_pseudo_table) [HAVE_SH64]: New pseudos
.mode, .isa and .uaquad.
[HAVE_SH64] (SH64PCREL16_32, SH64PCREL16_64, SH64PCREL16PT_32,
SH64PCREL16PT_64, MOVI_IMM_32, MOVI_IMM_64): Define.
[HAVE_SH64] (END): Define as 10.
[HAVE_SH64] (UNDEF_SH64PCREL, SH64PCREL16, SH64PCREL32,
SH64PCREL48, SH64PCREL64, UNDEF_MOVI, MOVI_16, MOVI_32, MOVI_48,
MOVI_64): Define.
[HAVE_SH64] (SH64PCREL16_F, SH64PCREL16_M, SH64PCREL16_LENGTH,
SH64PCREL32_F, SH64PCREL32_M, SH64PCREL32_LENGTH, SH64PCREL48_F,
SH64PCREL48_M, SH64PCREL48_LENGTH, SH64PCREL64_LENGTH,
MOVI_16_LENGTH, MOVI_32_LENGTH, MOVI_48_LENGTH, MOVI_64_LENGTH):
Define.
(md_relax_table) [HAVE_SH64]: Provide relaxations for SHmedia.
(md_begin) [HAVE_SH64]: Call shmedia_md_begin.
(parse_reg) [HAVE_SH64]: Parse register names case-insensitive.
(md_assemble) [HAVE_SH64]: Call shmedia_md_assemble if assembling
SHmedia instructions. Handle state-change after switching to
SHcompact.
(md_longopts) [HAVE_SH64]: New options --isa=* and --abi=*.
(md_parse_option) [HAVE_SH64]: Parse new options.
(md_show_usage) [HAVE_SH64]: Show usage of new options.
(md_convert_frag) [HAVE_SH64] <default>: Call
shmedia_md_convert_frag instead of abort.
(sh_force_relocation) [HAVE_SH64]: Also force relocation for
BFD_RELOC_SH_SHMEDIA_CODE.
(sh_elf_final_processing) [HAVE_SH64]: Set flags identifying
SHcompact or SHmedia code.
(md_apply_fix) [HAVE_SH64] <default>: Return result from calling
shmedia_md_apply_fix instead of abort.
(md_estimate_size_before_relax) [HAVE_SH64] <default>: Return
result from calling shmedia_md_estimate_size_before_relax instead
of calling abort.
(sh_do_align) [HAVE_SH64]: If shmedia_mode, let shmedia_do_align
do the work.
(tc_gen_reloc) [HAVE_SH64]: For unrecognized relocs, call
shmedia_init_reloc and do nothing more if it returns non-zero.
(sh_finalize) [HAVE_SH64]: Call shmedia_md_end.
* po/POTFILES.in: Regenerate.
* po/gas.pot: Regenerate.
A_DISP_PC only if it's an integral constant, and to
A_DISP_PC_ABS otherwise.
(get_specific): Accept A_DISP_PC_ABS where A_DISP_PC is
expected.
(build_Mytes): Mark PCRELIMM fix-ups as pc-relative only if
the operand type is not A_DISP_PC_ABS.
