mi_run_to_main. Skip thread exit test on remote targets.
* gdb.mi/mi-nsintrall.exp: Don't check isnative. Use
mi_run_to_main.
* gdb.mi/mi-nsmoribund.exp: Don't check isnative. Use
mi_run_to_main.
* lib/mi-support.exp (mi_gdb_target_cmd): Remove trailing anchor
when expecting ^connected. Detect when the target doesn't support
non-stop mode.
(mi_run_cmd): Detect if non-stop mode was requested by isn't
supported. Return -1 on error, 0 on success.
(mi_runto_helper): Don't expect a stop if mi_run_cmd failed.
(mi_runto): Return mi_runto_helper's result explicitly.
(mi_interpreter_init): Register the above.
* solib.c (clear_solib): Notify solib unload.
* breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
disable breakpoints on a.out targets.
* ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
* infcmd.c (finish_command_continuation): Pass '1' for
'print_frame' parameter to the observer.
* infrun.c (normal_stop): Don't print mi-specific information
here. Pass 'stop_print_frame' to the 'print_frame' parameter
of the observer.
* mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
If we need to print frame, and current uiout is not the MI one,
print frame again.
* mi/mi-common.h (struct mi_interp): New, moved from ...
* mi/mi-interp.c: ...here.
* mi/mi-main.c (mi_execute_command): If the thread changed
as result of command, report that.
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* defs.h: Mention ptid_is_pid.
* inferior.h (ptid_is_pid): Declare.
* gdbthread.h (struct thread_info) <stop_requested>: New field.
(set_stop_requested): Declare.
* infcmd.c (interrupt_target_1): Call set_stop_requested.
* infrun.c (clear_proceed_status): Clear stop_requested.
(infrun_thread_stop_requested_callback,
infrun_thread_stop_requested): New.
(handle_inferior_event): If a TARGET_SIGNAL_TRAP is reported on a
thread that had an explicit stop request, pretend we got a
TARGET_SIGNAL_0. Always stop if the thread had an explicit stop
request.
(print_stop_reason): In the SIGNAL_RECEIVED case, if we're not
outputting to MI, and we got a TARGET_SIGNAL_0, print "# Stopped",
instead of mentioning signal 0.
(ptid_is_pid): New.
* thread.c (set_stop_requested): New.
* linux-nat.c (queued_waitpid): Rename to ...
(queued_waitpid_1): ... this. Add `peek' argument. Handle it.
(queued_waitpid): New, as wrapper to queued_waitpid_1.
(push_waitpid): Push the SIGTRAP to the local event queue, to the
kernel's.
(send_sigint_callback): Delete.
(linux_nat_stop_lwp): New.
(linux_nat_stop): Use it.
gdb/doc/
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* observer.texi (thread_stop_requested): New.
gdb/testsuite/
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* lib/mi-support.exp (mi_expect_interrupt): Expect signal 0
instead of SIGINT.
* linux-nat.c (linux_nat_wait): Only use set_ignore_sigint in
all-stop mode.
gdb/testsuite/
* lib/mi-support.exp (mi_expect_interrupt): New.
(mi_reverse_list, mi_check_thread_states): New, moved and renamed
from gdb.mi/mi-nonstop.exp.
* gdb.mi/mi-nsintrall.exp, gdb.mi/nsintrall.c: New.
* gdb.mi/mi-nonstop.exp (myreverse, check_thread_states): Moved to
lib/mi-support.exp.
Use mi_check_thread_states throughout. Avoid ".*" and do not
require an anchor after -exec-run.
stop is pending. Avoid ".*" when two stops are pending.
* lib/gdb.exp (fullname_syntax_POSIX, fullname_syntax_UNC)
(fullname_syntax_DOS_CASE, fullname_syntax_DOS): Do not match
newlines in fullnames.
* lib/mi-support.exp (mi_run_cmd): Do not require an anchor.
(mi_expect_stop): Update comments. Only anchor in sync mode.
Do not match newlines.
(mi_send_resuming_command_raw): Always return status.
(mi_get_stop_line): Do not match more than one line by accident.
Only anchor in sync mode.
(mi_run_inline_test): If -exec-next fails, give up.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Do no print
^running here.
(mi_on_resume): Print ^running if not previously output.
* mi/mi-main.c (running_result_record_printed): New.
(captured_mi_execute_command): Reset
running_result_record_printed. Use running_result_record_printed
to decide if we should skip ^done.
(mi_execute_async_cli_command): Don't print ^running here.
* mi/mi-main.h (current_token, running_result_record_printed):
Declare.
(previous_async_command): Remove.
(mi_cmd_gdb_exit): Adjust.
(mi_cmd_exec_interrupt): Don't dance with previous_async_command.
(mi_cmd_target_select): Adjust.
(mi_cmd_execute): Don't set previous_async_command. Free token
here even in async mode.
(mi_execute_async_cli_command): Adjust.
(mi_exec_async_cli_cmd_continuation): Adjust. Do not free the
token.
(mi_load_progress): Adjust.
(varobj_get_frozen): New.
(varobj_update): New parameter explicit.
* varobj.c (struct varobj): New fields frozen
and not_fetched.
(varobj_set_frozen, varobj_get_frozen): New.
(install_new_value): Don't fetch values for
frozen variable object, or children thereof. Allow
a frozen variable object to have non-fetched value.
(varobj_update): Allow updating child variables.
Don't traverse frozen children.
(new_variable): Initialize the frozen field.
(c_value_of_variable): Return NULL for frozen
variable without any value yet.
* mi/mi-cmd-var.c (varobj_update_one): New parameter
'explicit'.
(mi_cmd_var_create): Output the 'frozen' field,
as soon as testsuite is adjusted to expect that field.
(mi_cmd_var_set_frozen): New.
(mi_cmd_var_update): Pass the 'explicit' parameter to
varobj_update_one.
* mi/mi-cmds.c (mi_cmds): Register '-var-set-frozen'.
* mi/mi-cmds.h (mi_cmd_var_set_frozen): Declare.
(do_children_tests): User char[2] instead of
char so that automatic printing of pointers to char
don't give unpredicable result.
* gdb.mi/var-cmd.c (do_locals_test): Initialize
local variables.
* gdb.mi/mi-var-child.exp: Step to right line
of do_children_tests.
* gdb.mi/mi2-var-child.exp: Likewise.
* gdb.mi/mi-var-cmd.exp: Step to right line of
do_locals_tests.
(do_children_tests): User char[2] instead of
char so that automatic printing of pointers to char
don't give unpredicable result.
* gdb.mi/mi2-var-cmd.exp: Likewise.
* lib/mi-support.exp (mi_continue_to_line):
Pass test name to mi_wait_for_stop.
