* gdbarch.sh (IEEE_FLOAT): New entry.
* gdbarch.c, gdbarch.h: Regenerated.
* valprint.c (IEEE_FLOAT): Provide a default #definition for this.
(print_floating): Use IEEE_FLOAT as if it were an expression; use
the code specific to IEEE-format numbers whenever the value of
IEEE_FLOAT is non-zero.
* config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
config/arc/tm-arc.h, config/arm/tm-arm.h, config/fr30/tm-fr30.h,
config/h8300/tm-h8300.h, config/i386/tm-i386.h,
config/i960/tm-i960.h, config/m88k/tm-m88k.h,
config/mips/tm-mips.h, config/pa/tm-hppa.h,
config/sparc/tm-sparc.h, config/delta/tm-delta.h,
config/frv/tm-frv.h (IEEE_FLOAT): For all ports that #define
IEEE_FLOAT, make sure they give it the value (1).
* config/i386/tm-i386sol2.h (HAVE_I387_REGS): Define.
* i386v4-nat.c (supply_fpregset, fill_fpregset): Add code
to handle floating point registers if NUM_FREGS is not zero.
* ChangeLog: Correct date on last entry.
* arm-linux-tdep.c (arm_linux_push_arguments): New function.
* config/arm/tm-linux: Redefined PUSH_ARGUMENTS for Linux.
* config/arm/tm-embed: Fix build warning from redefinition of
LOWEST_PC.
* config/arm/tm-arm.h: Remove TARGET_BYTE_ORDER_SELECTABLE.
* config/arm/tm-wince.h: Remove TARGET_BYTE_ORDER_SELECTABLE and
TARGET_BYTE_ORDER. Add TARGET_BYTE_ORDER_SELECTABLE_P to
override default in tm-arm.h. Use default target byte order
from tm-arm.h.
Change to rely on PIDGET etc.
* config/i386/nm-i386sol2.h (TARGET_HAS_WATCHPOINTS,
TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT,
STOPPED_BY_WATCHPOINT, target_[insert/remove]_watchpoint):
define. Allow target to use procfs hardware watchpoints.
* config/sparc/nm-sun4sol2.h: ditto.
* config/i386/tm-i386sol2.h (PIDGET, TIDGET, MERGEPID): modify
definitions to use 16 bits for the pid, 15 bits for the tid, and
1 bit for the flag.
* config/sparc/tm-sun4sol2.h: ditto.
(SOFTWARE_SINGLE_STEP, SOFTWARE_SINGLE_STEP_P): undefine.
* testsuite/gdb.threads/pthreads.exp (all_threads_running): Allow
for more than 15 thread increments.
dependencies. Created ARM Linux specific arm-linux-tdep.c file and moved
missing code into it from arm-linux-nat.c.
2000-04-05 Scott Bambrough <scottb@netwinder.org>
* arm-linux-tdep.c: New file.
* arm-linux-nat.c (fetch_fpregs): Remove unused code.
(arm_get_longjmp_target): Moved it and all defines
it uses to arm-linux-tdep.c.
(arm_linux_extract_return_value): Moved to
arm-linux-tdep.c.
* config/arm/linux.mt: Add arm-linux-tdep.c to TDEPFILES.
* config/i386/tm-go32.h (TARGET_LONG_DOUBLE_BIT): Remove
definition (and use the common one in tm-i386.h).
(REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Likewise.
(I386_DJGPP_TARGET): Don't define, it's no longer required.
(LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): Remove definition,
i386-tdep.c defines it for all x86 targets.
(LD_I387, HEX_LONG_DOUBLE_INPUT): Remove.
* config/djgpp/fnchange.lst: Add i386-linux-tdep.c.
* config/djgpp/djcheck.sh: Edit the copyright year out of the test
results. Fix editing of `main' arguments for non-GNU Sed.
and P_LINK_W.
(P_PEA_FP, P_MOVL_SP_FP): New macros.
(P_MOVL, P_LEAL, P_MOVML): Macros renamed from P_MOV_L, P_LEA_L and
P_MOVM_L.
(altos_skip_prologue, isi_skip_prologue): Use P_* macros, not octal
constants.
(delta68_in_sigtramp): New function.
(delta68_frame_args_address, delta68_frame_saved_pc): Ditto.
(m68k_skip_prologue): Use P_* macros, not hex constants.
(m68k_find_saved_regs): Do not expect a fixed sequence of register save
instructions, but accept them in any order; use P_* macros, not octal
or hex constants; recognize also `fmovemx to (fp + displacement)' and
`moveml to (fp + displacement)'.
* m68/tm-delta68.h (IN_SIGTRAMP): New macro.
(FRAME_SAVED_PC, FRAME_ARGS_ADDRESS): Ditto.
* config/i386/tm-i386aix.h (I386_AIX_TARGET): Remove.
* config/i386/tm-linux.h (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM):
Remove
* i386-tdep.c (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): New defines.
(i386_extract_return_value): Rewritten. Correctly support all
floating-point types and large integer types on targets that use
the standard i386 GDB register layout and return floating-point
values in the FPU.
(LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0,
LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
i386_linux_sigtramp_saved_sp): Deleted. Folks rightly pointed
out that these are target-dependent, and useful in non-native
configurations. Moved to...
* i386-linux-tdep.c: ... Here, a new file.
* Makefile.in (ALLDEPFILES): Add i386-linux-tdep.c.
(i386-linux-tdep.o): New rule.
(i386-linux-nat.o): We no longer depend on frame.h.
* config/i386/linux.mt (TDEPFILES): Add i386-linux-tdep.o.
* event-loop.c (top-level) [NO_FD_SET]: Deprecate this branch.
Print an error at compile time if we are to use select, but FD_SET
is not available.
(SELECT_MASK, NBBY, FD_SETSIZE, NFDBITS, MASK_SIZE): Define only
if HAVE_POLL is not defined and NO_FD_SET *is* defined.
(create_file_handler) [!HAVE_POLL]: Use FD_SET and FD_CLR.
(delete_file_handler) [!HAVE_POLL]: Use FD_CLR and FD_ISSET.
(gdb_wait_for_event) [!HAVE_POLL]: Copy fd_set sets directly
instead of using memcpy and memset. Use FD_ISSET.
* config/i386/xm-go32.h (fd_mask): Remove typedef.
it:
* config/djgpp/djconfig.sh: New file.
* config/djgpp/config.sed: New file.
* config/djgpp/README: New file.
* config/djgpp/fnchange.lst: New file.
* config/djgpp/djcheck.sh: New file.
LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
i386_linux_sigtramp_saved_sp): Deleted. These all implement
Linux-specific signal trampoline detection, and should be moved to...
* i386-linux-nat.c: ... here.
* config/i386/tm-linux.h (I386_LINUX_SIGTRAMP): No need to define
this any more, since we're not enabling OS-specific code in a
OS-independent file.
Allow GDB to run on Linux 2.0 again.
* config.in: Add HAVE_PTRACE_GETREGS.
* configure.in: Check if <sys/ptrace.h> defines PTRACE_GETREGS.
* configure: Regenerated.
* config/i386/nm-linux.h (CANNOT_FETCH_REGISTER,
CANNOT_STORE_REGISTER): New defines.
* i386-linux-nat.c (have_ptrace_getregs): New variable.
(PTRACE_XFER_TYPE, CANNOT_FETCH_REGISTER, fetch_register,
old_fetch_inferior_registers, CANNOT_STORE_REGISTER,
store_register, old_store_inferior_registers): Copied over from
`inptrace.c' as a temporary measure.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs):
Conditionalize on HAVE_PTRACE_GETREGS. Define stubs if
HAVE_PTRACE_GETREGS isn't defined.
(fetch_regs): Reset `have_ptrace_getregs' if ptrace call fails
with EIO.
(fetch_inferior_registers, store_inferior_registers): Fall back on
the method use in `infptrace.c' (by calling
old_fetch_inferior_registers and old_store_inferior_registers) if
`have_ptrace_getregs' isn't set.
Fix support for Linux/i386 signal trampolines. The old approach
didn't work for Linux 2.2 and beyond, and didn't work with recent
versions of the GNU C library.
* i386-tdep.c (LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1): New defines.
(linux_rt_sigtramp_code): New variable.
(LINUX_RT_SIGTRAMP_LEN): New define.
(i386_linux_rt_sigtramp_start): New function. Detect start of
signal trampolines for RT signals.
(i386_linux_sigtramp): Removed.
(i386_linux_in_sigtramp): New function.
(i386_linux_sigcontext_addr): New function. Recognize the names
of the signal tranmpolines used by recent versions of the GNU C
library, and add support for RT signals.
(LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET): New
defines. Moved here from config/i386/tm-linux.h.
(i386_linux_sigtramp_saved_pc, i386_linux_sigtramp_saved_sp):
Reimplement in terms of i386_linux_sigcontext_addr.
* config/i386/tm-linux.h (LINUX_SIGCONTEXT_SIZE): Removed.
(LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET):
Moved to i386-tdep.c.
(IN_SIGTRAMP): Redefine to call i386_linux_in_sigtramp.
* config/arm/linux.mh (NATDEPFILES): Removed core-regset.o.
Not used. Required to get GDB to build on glibc 2.1.3.
* config/arm/tm-linux.h (LOWEST_PC): Undefine LOWEST_PC
before redefining. Gets rid of compiler warning.
Make cross-compilation for the Hurd more friendly.
From Jeff Bailey <jbailey@gnu.org>:
* configure.in: Use AC_CHECK_TOOL to find MiG.
* Makefile.in (MIG): New variable.
* config/i386/i386gnu.mh (MIG): Remove.
* configure: Regenerated.
* config/arm/tm-wince.h: New file.
* config/arm/wince.mt New file.
* config/sh/tm-wince.h: New file.
* config/sh/wince.mt New file.
* config/mips/tm-wince.h: New file.
* config/mips/wince.mt New file.
* wince.c: New file.
* wince-stub.c: New file.
* wince-stub.h: New file.
* sh-tdep.c: Use correct register names for Windows CE.
* valops.c (COERCE_FLOAT_TO_DOUBLE): Rework definition to be
more function-like.
(default_coerce_float_to_double, standard_coerce_float_to_double):
New functions.
(value_arg_coerce): Adjust for new definition.
* value.h (default_coerce_float_to_double,
standard_coerce_float_to_double): New declarations for the above.
* gdbarch.sh (coerce_float_to_double): New entry, replacing macro.
* gdbarch.c, gdbarch.h: Regenerated.
* tm-alpha.h, tm-fr30.h, tm-m32r.h, tm-mips.h, tm-hppa.h,
tm-rs6000.h, tm-sh.h, tm-sparc.h (COERCE_FLOAT_TO_DOUBLE): Change
definitions.
* mips-tdep.c (mips_coerce_float_to_double): Supply our own custom
function here.
(mips_gdbarch_init): Install that as our coerce_float_to_double
function.
* gdb/config/i386/windows.mh,
gdb/doc/GDBvn.texi, gdb/doc/remote.texi,
gdb/testsuite/gdb.base/README, gdb/testsuite/gdb.base/crossload.exp,
gdb/testsuite/gdb.base/i486-elf.u, gdb/testsuite/gdb.base/i860-elf.u,
gdb/testsuite/gdb.base/m68k-aout.u,
gdb/testsuite/gdb.base/m68k-aout2.u,
gdb/testsuite/gdb.base/m68k-elf.u, gdb/testsuite/gdb.base/mips-ecoff.u,
gdb/testsuite/gdb.base/sparc-aout.u,
gdb/testsuite/gdb.base/sparc-elf.u,
gdb/tui/Makefile,
readline/ChangeLog: These files have been removed over the course
of the last year, but weren't cvs removed from the old GDB repository
on sourceware.
