PR gas/12915
* config/tc-mips.c (append_insn): Only consider hazards between the
pre-noreorder block and ip.
gas/testsuite/
* gas/mips/pr12915.s, gas/mips/pr12915.d: New test.
* gas/mips/mips.exp: Run it.
2011-06-23 Andrew Burgess <aburgess@broadcom.com>
* gdbtypes.c (append_composite_type_field_aligned): Fix
calculation of bit position based on alignment.
* options.h (class General_options): Add --ctors-in-init-array.
* layout.cc (Layout::get_output_section): Treat SHT_INIT_ARRAY and
friends as SHT_PROGBITS for merging sections.
(Layout::layout): Remove special handling of .init_array and
friends. Don't sort if doing relocatable link. Sort for .ctors
and .dtors if ctors_in_init_array.
(Layout::make_output_section): Force correct section types for
.init_array and friends. Don't sort if doing relocatable link,
Don't sort .ctors and .dtors if ctors_in_init_array.
(Layout::section_name_mapping): Remove .ctors. and .dtorso.
(Layout::output_section_name): Add relobj parameter. Change all
callers. Handle .ctors. and .dtors. in code rather than table.
Handle .ctors and .dtors if ctors_in_init_array.
(Layout::match_file_name): New function, moved from output.cc.
* layout.h (class Layout): Update declarations.
* output.cc: Include "layout.h".
(Input_section_sort_entry::get_priority): New function.
(Input_section_sort_entry::match_file_name): Just call
Layout::match_file_name.
(Output_section::Input_section_sort_init_fini_compare::operator()):
Handle .ctors and .dtors. Sort by explicit priority rather than
by name.
* configure.ac: Remove CONSTRUCTOR_PRIORITY test and conditional.
* testsuite/initpri2.c: New test.
* testsuite/Makefile.am: Don't test CONSTRUCTOR_PRIORITY.
(check_PROGRAMS): Add initpri2.
(initpri2_SOURCES, initpri2_DEPENDENCIES): New variables.
(initpri2_LDFLAGS, initpri2_LDADD): New variables.
* configure, testsuite/Makefile.in: Rebuild.
* breakpoint.c (bpstat_stop_status): Call the check_status
breakpoint_ops method.
(print_one_breakpoint_location): Also print the condition for Ada
exception catchpoints.
(allocate_bp_location): New, factored out from
allocate_bp_location.
(allocate_bp_location): Adjust. Call the owner breakpoint's
allocate_location method, if there is one.
(free_bp_location): Call the locations's dtor method, if there is
one.
(init_raw_breakpoint_without_location): New breakpoint_ops
parameter. Use it.
(set_raw_breakpoint_without_location): Adjust.
(init_raw_breakpoint): New breakpoint_ops parameter. Pass it down.
(set_raw_breakpoint): Adjust.
(catch_fork_breakpoint_ops, catch_vfork_breakpoint_ops)
(catch_syscall_breakpoint_ops): Install NULL allocate_location,
re_set and check_status methods.
(init_catchpoint): Don't memset, initialize thread, addr_string
and enable_state. Pass the ops down to init_raw_breakpoint.
(install_catchpoint): Rename to ...
(install_breakpoint): ... this, and make extern.
(create_fork_vfork_event_catchpoint): Adjust.
(catch_exec_breakpoint_ops): Install NULL allocate_location,
re_set and check_status methods.
(create_syscall_event_catchpoint): Adjust.
(ranged_breakpoint_ops, watchpoint_breakpoint_ops)
(masked_watchpoint_breakpoint_ops): Install NULL
allocate_location, re_set and check_status methods.
(catch_exec_command_1): Adjust.
(gnu_v3_exception_catchpoint_ops): Install NULL allocate_location,
re_set and check_status methods.
(create_ada_exception_breakpoint): Rename to ...
(init_ada_exception_breakpoint): ... this. Add a struct
breakpoint parameter, and delete the exp_string, cond_string and
cond parameters. Use init_raw_breakpoint, and don't install or
mention the breakpoint yet. Don't clear breakpoint fields that
init_raw_breakpoint already clears.
(re_set_breakpoint): Delete, split into ...
(breakpoint_re_set_default, prepare_re_set_context): ... these new
functions.
(breakpoint_re_set_one): Call the breakpoint's
breakpoint_ops->re_set implementation, if there's one. Adjust.
* breakpoint.h: Forward declare struct bpstats and struct bp_location.
(struct bp_location_ops): New type.
(struct bp_location): New field `ops'.
(struct breakpoint_ops): New `allocate_location', `re_set' and
`check_status' fields. Make `breakpoint_hit''s description match
reality.
(init_bp_location): Declare.
(breakpoint_re_set_default): Declare.
(create_ada_exception_breakpoint): Rename to ...
(init_ada_exception_breakpoint): ... this. Add a struct
breakpoint parameter, and delete the exp_string, cond_string and
cond parameters.
(install_breakpoint): Declare.
* ada-lang.c: Include exceptions.h.
<Ada exceptions description>: Update.
(struct ada_catchpoint_location): New type.
(ada_catchpoint_location_dtor): New function.
(ada_catchpoint_location_ops): New global.
(ada_catchpoint): New type.
(create_excep_cond_exprs): New function.
(dtor_exception, allocate_location_exception, re_set_exception)
(should_stop_exception, check_status_exception): New functions.
(print_one_exception, print_mention_exception)
(print_recreate_exception): Adjust.
(dtor_catch_exception, allocate_location_catch_exception)
(re_set_catch_exception, check_status_catch_exception): New
functions.
(catch_exception_breakpoint_ops): Install them.
(dtor_catch_exception_unhandled)
(allocate_location_catch_exception_unhandled)
(re_set_catch_exception_unhandled)
(check_status_catch_exception_unhandled): New functions.
(catch_exception_unhandled_breakpoint_ops): Install them.
(dtor_catch_assert, allocate_location_catch_assert)
(re_set_catch_assert, check_status_catch_assert): New functions.
(catch_assert_breakpoint_ops): Install them.
(ada_exception_catchpoint_p): Delete.
(catch_ada_exception_command_split)
(ada_exception_catchpoint_cond_string): Rename exp_string
parameter to excep_string. Adjust.
(ada_parse_catchpoint_condition): Delete.
(ada_exception_sal): Rename the exp_string parameter to
excep_string. Delete the cond_string and cond parameters.
Adjust.
(ada_decode_exception_location): Rename the exp_string parameter
to excep_string. Delete the cond_string and cond parameters.
Adjust.
(create_ada_exception_catchpoint): New function.
(catch_ada_exception_command, ada_decode_assert_location)
(catch_assert_command): Adjust.
* ada-lang.h (ada_exception_catchpoint_p): Delete declaration.
* ada-lang.c: Include arch-utils.h.
(ada_decode_exception_location): Make static.
(catch_ada_exception_command): Moved here from breakpoint.c.
(ada_decode_assert_location): Make static.
(catch_assert_command): Moved here from breakpoint.c.
(_initialize_ada_lang): Install the exception and assert
catchpoint commands here.
* ada-lang.h (ada_decode_exception_location)
(ada_decode_assert_location): Delete declarations.
* breakpoint.c (CATCH_PERMANENT, CATCH_TEMPORARY): Moved to
breakpoint.h.
(create_ada_exception_breakpoint): Make extern.
(catch_ada_exception_command, catch_assert_command): Moved to
ada-lang.c.
(add_catch_command): Make extern.
(_initilize_breakpoint): Don't install the exception and assert
catchpoint commands here.
* breakpoint.h (CATCH_PERMANENT, CATCH_TEMPORARY): Moved from
breakpoint.c
(add_catch_command, create_ada_exception_breakpoint): Declare.
* breakpoint.c (init_raw_breakpoint_without_location): Don't add
the breakpoint to the breakpoint chain here.
(set_raw_breakpoint_without_location): Add the breakpoint to the
breakpoint chain here.
(init_raw_breakpoint): Adjust comments.
(set_raw_breakpoint): Add the breakpoint to the breakpoint chain
here.
(init_catchpoint): Don't set the catchpoint's breakpoint number
here.
(install_catchpoint): New function.
(create_fork_vfork_event_catchpoint)
(create_syscall_event_catchpoint, catch_exec_command_1): Adjust to
use install_catchpoint.
* breakpoint.h (struct breakpoint_ops): New field `dtor'.
(struct breakpoint): Delete field `syscalls_to_be_caught'.
* breakpoint.c (init_raw_breakpoint_without_location): Remove
reference to syscalls_to_be_caught.
(catch_fork_breakpoint_ops, catch_vfork_breakpoint_ops): Install a
NULL `dtor'.
(struct syscall_catchpoint): New type.
(dtor_catch_syscall): New function.
(insert_catch_syscall, remove_catch_syscall)
(breakpoint_hit_catch_syscall, print_one_catch_syscall)
(print_recreate_catch_syscall): Adjust.
(catch_syscall_breakpoint_ops): Install dtor_catch_syscall.
(catch_exec_breakpoint_ops): Install a NULL `dtor'.
(create_syscall_event_catchpoint): Adjust to use init_catchpoint.
(ranged_breakpoint_ops, watchpoint_breakpoint_ops)
(masked_watchpoint_breakpoint_ops)
(gnu_v3_exception_catchpoint_ops): Install a NULL `dtor'.
(delete_breakpoint): Call the `dtor' breakpoint_ops method, if
there is one. Remove references to syscalls_to_be_caught.
(catching_syscall_number): Adjust.
* ada-lang.c (catch_exception_breakpoint_ops)
(catch_exception_unhandled_breakpoint_ops)
(catch_assert_breakpoint_ops): Install a NULL `dtor'.
* breakpoint.c (add_to_breakpoint_chain)
(init_raw_breakpoint_without_location): New functions, factored
out from ...
(set_raw_breakpoint_without_location): ... this one.
(init_raw_breakpoint): New function, factored out from
set_raw_breakpoint and adjusted to use
init_raw_breakpoint_without_location.
(set_raw_breakpoint): Adjust.
(init_catchpoint): New function, factored out from
create_catchpoint_without_mention and adjusted to use
init_raw_breakpoint.
(create_catchpoint_without_mention): Adjust.
TPREL in a PIE image.
(alpha_dynamic_entries_for_reloc): Likewise.
(elf64_alpha_relocate_section): Allow TPREL in PIE images.
(elf64_alpha_relax_got_load): Likewise.
* dwarf.c (decode_location_expression): For DW_OP_GNU_convert and
DW_OP_GNU_reinterpret, if uvalue is 0, don't add cu_offset.
Handle DW_OP_GNU_parameter_ref.
Now that the Blackfin libgloss code extracts the 2nd result and the
error code from the R1/R2 registers, have the sim fill them up.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* gas/config/tc-arm.c (vfp_conv): Add check on range of immediate operand
in vcvt instruction between floating-point and fixed-point.
(operand_parse_code): Add "OP_oI32z".
(parse_operands): OP_oI32z case added.
* gas/testsuite/gas/arm/vcvt-bad.d: New test.
* gas/testsuite/gas/arm/vcvt-bad.l: Likewise.
* gas/testsuite/gas/arm/vcvt-bad.s: Likewise.
* gas/testsuite/gas/arm/vcvt.d: Likewise.
* gas/testsuite/gas/arm/vcvt.s: Likewise.
* layout.cc (Layout::attach_allocated_section_to_segment): Add a
.interp section to a PT_INTERP segment even if we have seen a
--dynamic-linker option. Don't do it if we have seen a PHDRS
clause in a linker script.
(Layout::finalize): Don't create a .interp section if we've
already create a PT_INTERP segment.
(Layout::create_interp): Always call choose_output_section (revert
patch of 2011-06-17). Don't create PT_INTERP segment.
* script-sections.cc
(Script_sections::create_note_and_tls_segments): Add a .interp
section to a PT_INTERP segment even if we have seen a
--dynamic-linker option.
