GDB tries to skip prologue for .S files according to .debug_line but it then
places the breakpoint to a location where it is never hit.
This is because #defines in .S files cause prologue skipping which is
completely inappropriate, for s390x:
glibc/sysdeps/unix/syscall-template.S
78:/* This is a "normal" system call stub: if there is an error,
79: it returns -1 and sets errno. */
80:
81:T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
82: ret
00000000000f4210 T __select
Line Number Statements:
Extended opcode 2: set Address to 0xf41c8
Advance Line by 80 to 81
Copy
Advance PC by 102 to 0xf422e
Special opcode 6: advance Address by 0 to 0xf422e and Line by 1 to 82
Special opcode 34: advance Address by 2 to 0xf4230 and Line by 1 to 83
Advance PC by 38 to 0xf4256
Extended opcode 1: End of Sequence
Compilation Unit @ offset 0x28b3e0:
<0><28b3eb>: Abbrev Number: 1 (DW_TAG_compile_unit)
<28b3ec> DW_AT_stmt_list : 0x7b439
<28b3f0> DW_AT_low_pc : 0xf41c8
<28b3f8> DW_AT_high_pc : 0xf4256
<28b400> DW_AT_name : ../sysdeps/unix/syscall-template.S
<28b423> DW_AT_comp_dir : /usr/src/debug////////glibc-2.17-c758a686/misc
<28b452> DW_AT_producer : GNU AS 2.23.52.0.1
<28b465> DW_AT_language : 32769 (MIPS assembler)
without debuginfo or with debuginfo and the fix - correct address:
(gdb) b select
Breakpoint 1 at 0xf4210
It is also where .dynsym+.symtab point to:
00000000000f4210 T __select
00000000000f4210 W select
with debuginfo, without the fix:
(gdb) b select
Breakpoint 1 at 0xf41c8: file ../sysdeps/unix/syscall-template.S, line 81.
One part is to behave for asm files similar way like for 'locations_valid':
/* Symtab has been compiled with both optimizations and debug info so that
GDB may stop skipping prologues as variables locations are valid already
at function entry points. */
unsigned int locations_valid : 1;
The other part is to extend the 'locations_valid'-like functionality more.
Both minsym_found and find_function_start_sal need to be patched, otherwise
their addresses do not match and GDB regresses on ppc64:
gdb/ChangeLog
2015-06-26 Jan Kratochvil <jan.kratochvil@redhat.com>
* linespec.c (minsym_found): Reset sal.PC for COMPUNIT_LOCATIONS_VALID
and language_asm..
* symtab.c (find_function_start_sal): Likewise.
gdb/testsuite/ChangeLog
2015-06-26 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/amd64-prologue-skip.S: New file.
* gdb.arch/amd64-prologue-skip.exp: New file.
Pedro Alves:
The commands that enables aren't even documented in the manual.
Judging from that, I assume that only wdb users would ever really
be using the --xdb switch.
I think it's time to drop "support" for the --xdb switch too. I
looked through the commands that that exposes, the only that looked
potentially interesting was "go", but then it's just an alias
for "tbreak+jump", which can easily be done with "define go...end".
I'd rather free up the "go" name for something potentially
more interesting (either run control, or maybe even unrelated,
e.g., for golang).
gdb/ChangeLog
2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* NEWS (Changes since GDB 7.9): Add removed -xdb.
* breakpoint.c (command_line_is_silent): Remove xdb_commands
conditional.
(_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
and lb.
* cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
va.
* cli/cli-decode.c (find_command_name_length): Remove xdb_commands
conditional.
* defs.h (xdb_commands): Remove declaration.
* f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
* guile/scm-cmd.c (command_classes): Remove xdb from comment.
* infcmd.c (run_no_args_command, go_command): Remove.
(_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
* infrun.c (xdb_handle_command): Remove.
(_initialize_infrun): Remove xdb_commands for lz and z.
* main.c (xdb_commands): Remove variable.
(captured_main): Remove "xdb" from long_options.
(print_gdb_help): Remove --xdb from help.
* python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
* source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
* stack.c (backtrace_full_command, args_plus_locals_info)
(current_frame_command): Remove.
(_initialize_stack): Remove xdb_commands for t, T and l.
* symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
* thread.c (_initialize_thread): Remove xdb_commands condition.
* tui/tui-layout.c (tui_toggle_layout_command)
(tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
(_initialize_tui_layout): Remove xdb_commands for td and ts.
* tui/tui-regs.c (tui_scroll_regs_forward_command)
(tui_scroll_regs_backward_command): Remove.
(_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
* tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
(_initialize_tui_win): Remove xdb_commands for U and w.
* utils.c (pagination_on_command, pagination_off_command): Remove.
(initialize_utils): Remove xdb_commands for am and sm.
gdb/doc/ChangeLog
2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Mode Options): Remove -xdb.
gdb/ChangeLog:
* symtab.c (hash_symbol_entry): Hash STRUCT_DOMAIN symbols as
VAR_DOMAIN.
(symbol_cache_lookup): Clarify use of bsc_ptr, slot_ptr parameters.
Include symbol domain in debugging output.
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
This commit introduces a new inline common function "startswith"
which takes two string arguments and returns nonzero if the first
string starts with the second. It also updates the 295 places
where this logic was written out longhand to use the new function.
gdb/ChangeLog:
* common/common-utils.h (startswith): New inline function.
All places where this logic was used updated to use the above.
In C, an enum or structure defined inside other structure has global
scope just like it had been defined outside the struct in the first
place. However, in C++, such a nested structure is given a name that
is nested inside the structure. This patch moves such affected
structures/enums out to global scope, so that code using them works
the same in C++ as it works today in C.
gdb/ChangeLog:
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
* dwarf2-frame.c (enum cfa_how_kind, struct
dwarf2_frame_state_reg_info): Move out of struct
dwarf2_frame_state.
* dwarf2read.c (struct tu_stats): Move out of struct
dwarf2_per_objfile.
(struct file_entry): Move out of struct line_header.
(struct nextfield, struct nextfnfield, struct fnfieldlist, struct
typedef_field_list): Move out of struct field_info.
* gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
Move out of struct dynamic_prop.
(union type_owner, union field_location, struct field, struct
range_bounds, union type_specific): Move out of struct main_type.
(struct fn_fieldlist, struct fn_field, struct typedef_field)
(VOFFSET_STATIC): Move out of struct cplus_struct_type.
(struct call_site_target, union call_site_parameter_u, struct
call_site_parameter): Move out of struct call_site.
* m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
m32c_prologue.
(enum srcdest_kind): Move out of struct srcdest.
* main.c (enum cmdarg_kind): Move out of struct cmdarg.
* prologue-value.h (enum prologue_value_kind): Move out of struct
prologue_value.
* s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
gdbarch_tdep.
* stabsread.c (struct nextfield, struct next_fnfieldlist): Move
out of struct field_info.
* symfile.h (struct other_sections): Move out of struct
section_addr_info.
* symtab.c (struct symbol_cache_slot): Move out struct
block_symbol_cache.
* target-descriptions.c (enum tdesc_type_kind): Move out of
typedef struct tdesc_type.
* tui/tui-data.h (enum tui_line_or_address_kind): Move out of
struct tui_line_or_address.
* value.c (enum internalvar_kind, union internalvar_data): Move
out of struct internalvar.
* xtensa-tdep.h (struct ctype_cache): Move out of struct
gdbarch_tdep.
This patch renames symbols that happen to have names which are
reserved keywords in C++.
Most of this was generated with Tromey's cxx-conversion.el script.
Some places where later hand massaged a bit, to fix formatting, etc.
And this was rebased several times meanwhile, along with re-running
the script, so re-running the script from scratch probably does not
result in the exact same output. I don't think that matters anyway.
gdb/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
gdb/gdbserver/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
This commit adds a new exception, MAX_COMPLETIONS_REACHED_ERROR, to be
thrown whenever the completer has generated too many candidates to
be useful. A new user-settable variable, "max_completions", is added
to control this behaviour. A top-level completion limit is added to
complete_line_internal, as the final check to ensure the user never
sees too many completions. An additional limit is added to
default_make_symbol_completion_list_break_on, to halt time-consuming
symbol table expansions.
gdb/ChangeLog:
PR cli/9007
PR cli/11920
PR cli/15548
* cli/cli-cmds.c (complete_command): Notify user if max-completions
reached.
* common/common-exceptions.h (enum errors)
<MAX_COMPLETIONS_REACHED_ERROR>: New value.
* completer.h (get_max_completions_reached_message): New declaration.
(max_completions): Likewise.
(completion_tracker_t): New typedef.
(new_completion_tracker): New declaration.
(make_cleanup_free_completion_tracker): Likewise.
(maybe_add_completion_enum): New enum.
(maybe_add_completion): New declaration.
(throw_max_completions_reached_error): Likewise.
* completer.c (max_completions): New global variable.
(new_completion_tracker): New function.
(free_completion_tracker): Likewise.
(make_cleanup_free_completion_tracker): Likewise.
(maybe_add_completions): Likewise.
(throw_max_completions_reached_error): Likewise.
(complete_line): Remove duplicates and limit result to max_completions
entries.
(get_max_completions_reached_message): New function.
(gdb_display_match_list): Handle max_completions.
(_initialize_completer): New declaration and function.
* symtab.c: Include completer.h.
(completion_tracker): New static variable.
(completion_list_add_name): Call maybe_add_completion.
(default_make_symbol_completion_list_break_on_1): Renamed from
default_make_symbol_completion_list_break_on. Maintain
completion_tracker across calls to completion_list_add_name.
(default_make_symbol_completion_list_break_on): New function.
* top.c (init_main): Set rl_completion_display_matches_hook.
* tui/tui-io.c: Include completer.h.
(tui_old_rl_display_matches_hook): New static global.
(tui_rl_display_match_list): Notify user if max-completions reached.
(tui_setup_io): Save/restore rl_completion_display_matches_hook.
* NEWS (New Options): Mention set/show max-completions.
gdb/doc/ChangeLog:
* gdb.texinfo (Command Completion): Document new
"set/show max-completions" option.
gdb/testsuite/ChangeLog:
* gdb.base/completion.exp: Disable completion limiting for
existing tests. Add new tests to check completion limiting.
* gdb.linespec/ls-errs.exp: Disable completion limiting.
This commit makes default_make_symbol_completion_list_break_on build
the list of completions as it expands the necessary symbol tables,
rather than expanding all necessary symbol tables first and then
building the completion lists second. This allows for the early
termination of symbol table expansion if required.
gdb/ChangeLog:
* symtab.c (struct add_name_data) <code>: New field.
Updated comments.
(add_symtab_completions): New function.
(symtab_expansion_callback): Likewise.
(default_make_symbol_completion_list_break_on): Set datum.code.
Move minimal symbol scan before calling expand_symtabs_matching.
Scan known primary symtabs for externs and statics before calling
expand_symtabs_matching. Pass symtab_expansion_callback as
expansion_notify argument to expand_symtabs_matching. Do not scan
primary symtabs for externs and statics after calling
expand_symtabs_matching.
This commit adds a new callback parameter, "expansion_notify", to the
top-level expand_symtabs_matching function and to all the vectorized
functions it defers to. If expansion_notify is non-NULL, it will be
called every time a symbol table is expanded.
gdb/ChangeLog:
* symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
(struct quick_symbol_functions) <expand_symtabs_matching>:
New argument expansion_notify. All uses updated.
(expand_symtabs_matching): New argument expansion_notify.
All uses updated.
* symfile-debug.c (debug_qf_expand_symtabs_matching):
Also print expansion notify.
* symtab.c (expand_symtabs_matching_via_partial): Call
expansion_notify whenever a partial symbol table is expanded.
* dwarf2read.c (dw2_expand_symtabs_matching): Call
expansion_notify whenever a symbol table is instantiated.
gdb/ChangeLog:
Add symbol lookup cache.
* NEWS: Document new options and commands.
* symtab.c (symbol_cache_key): New static global.
(DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
(SYMBOL_LOOKUP_FAILED): New macro.
(symbol_cache_slot_state): New enum.
(block_symbol_cache): New struct.
(symbol_cache): New struct.
(new_symbol_cache_size, symbol_cache_size): New static globals.
(hash_symbol_entry, eq_symbol_entry): New functions.
(symbol_cache_byte_size, resize_symbol_cache): New functions.
(make_symbol_cache, free_symbol_cache): New functions.
(get_symbol_cache, symbol_cache_cleanup): New function.
(set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
(symbol_cache_lookup, symbol_cache_clear_slot): New function.
(symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
(symbol_cache_flush, symbol_cache_dump): New functions.
(maintenance_print_symbol_cache): New function.
(maintenance_flush_symbol_cache): New function.
(symbol_cache_stats): New function.
(maintenance_print_symbol_cache_statistics): New function.
(symtab_new_objfile_observer): New function.
(symtab_free_objfile_observer): New function.
(lookup_static_symbol, lookup_global_symbol): Use symbol cache.
(_initialize_symtab): Init symbol_cache_key. New parameter
maint symbol-cache-size. New maint commands print symbol-cache,
print symbol-cache-statistics, flush-symbol-cache.
Install new_objfile, free_objfile observers.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Document new commands
"maint print symbol-cache", "maint print symbol-cache-statistics",
"maint flush-symbol-cache". Document new option
"maint set symbol-cache-size".
clear_symtab_users calls breakpoint_re_set before
observer_notify_new_objfile(NULL), and thus symbol lookup
done during breakpoint_re_set will see a stale cache.
Presumably we just need to move the call to observer_notify_new_objfile(NULL)
to before breakpoint_re_set, but need to check for other such issues,
and 7.9 is scheduled to branch tomorrow.
Reverts commits:
b2fb95e006400678a494d98b9ccbcc77087adf50
gdb/ChangeLog:
* symtab.c (eq_symbol_entry): Use SYMBOL_SEARCH_NAME and
symbol_matches_domain for symbol comparisons.
* symtab.c (symbol_cache_mark_found): Improve function comment.
Rename parameter objfile to objfile_context.
(symbol_cache_mark_not_found): Improve function comment.
Add symbol lookup cache.
* NEWS: Document new options and commands.
* symtab.c (symbol_cache_key): New static global.
(DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
(SYMBOL_LOOKUP_FAILED): New macro.
(symbol_cache_slot_state): New enum.
(block_symbol_cache): New struct.
(symbol_cache): New struct.
(new_symbol_cache_size, symbol_cache_size): New static globals.
(hash_symbol_entry, eq_symbol_entry): New functions.
(symbol_cache_byte_size, resize_symbol_cache): New functions.
(make_symbol_cache, free_symbol_cache): New functions.
(get_symbol_cache, symbol_cache_cleanup): New function.
(set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
(symbol_cache_lookup, symbol_cache_clear_slot): New function.
(symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
(symbol_cache_flush, symbol_cache_dump): New functions.
(maintenance_print_symbol_cache): New function.
(maintenance_flush_symbol_cache): New function.
(symbol_cache_stats): New function.
(maintenance_print_symbol_cache_statistics): New function.
(symtab_new_objfile_observer): New function.
(symtab_free_objfile_observer): New function.
(lookup_static_symbol, lookup_global_symbol): Use symbol cache.
(_initialize_symtab): Init symbol_cache_key. New parameter
maint symbol-cache-size. New maint commands print symbol-cache,
print symbol-cache-statistics, flush-symbol-cache.
Install new_objfile, free_objfile observers.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Document new commands
"maint print symbol-cache", "maint print symbol-cache-statistics",
"maint flush-symbol-cache". Document new option
"maint set symbol-cache-size".
gdb/ChangeLog:
Add symbol lookup cache.
* NEWS: Document new options and commands.
* symtab.c (symbol_cache_key): New static global.
(DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
(SYMBOL_LOOKUP_FAILED): New macro.
(symbol_cache_slot_state): New enum.
(block_symbol_cache): New struct.
(symbol_cache): New struct.
(new_symbol_cache_size, symbol_cache_size): New static globals.
(hash_symbol_entry, eq_symbol_entry): New functions.
(symbol_cache_byte_size, resize_symbol_cache): New functions.
(make_symbol_cache, free_symbol_cache): New functions.
(get_symbol_cache, symbol_cache_cleanup): New function.
(set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
(symbol_cache_lookup, symbol_cache_clear_slot): New function.
(symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
(symbol_cache_flush, symbol_cache_dump): New functions.
(maintenance_print_symbol_cache): New function.
(maintenance_flush_symbol_cache): New function.
(symbol_cache_stats): New function.
(maintenance_print_symbol_cache_statistics): New function.
(symtab_new_objfile_observer): New function.
(symtab_free_objfile_observer): New function.
(lookup_static_symbol, lookup_global_symbol): Use symbol cache.
(_initialize_symtab): Init symbol_cache_key. New parameter
maint symbol-cache-size. New maint commands print symbol-cache,
print symbol-cache-statistics, flush-symbol-cache.
Install new_objfile, free_objfile observers.
doc/ChangeLog:
* gdb.texinfo (Symbols): Document new commands
"maint print symbol-cache", "maint print symbol-cache-statistics",
"maint flush-symbol-cache". Document new option
"maint set symbol-cache-size".
gdb/ChangeLog:
* ada-lang.c (user_select_syms): Only fetch symtab if symbol is
objfile-owned.
(cache_symbol): Ignore symbols that are not objfile-owned.
* block.c (block_objfile): New function.
(block_gdbarch): New function.
* block.h (block_objfile): Declare.
(block_gdbarch): Declare.
* c-exp.y (classify_name): Remove call to
language_lookup_primitive_type. No longer necessary.
* gdbtypes.c (lookup_typename): Call lookup_symbol_in_language.
Remove call to language_lookup_primitive_type. No longer necessary.
* guile/scm-symbol.c (syscm_gdbarch_data_key): New static global.
(syscm_gdbarch_data): New struct.
(syscm_init_arch_symbols): New function.
(syscm_get_symbol_map): Renamed from syscm_objfile_symbol_map.
All callers updated. Handle symbols owned by arches.
(gdbscm_symbol_symtab): Handle symbols owned by arches.
(gdbscm_initialize_symbols): Initialize syscm_gdbarch_data_key.
* language.c (language_lookup_primitive_type_1): New function.
(language_lookup_primitive_type): Call it.
(language_alloc_type_symbol): New function.
(language_init_primitive_type_symbols): New function.
(language_lookup_primitive_type_as_symbol): New function.
* language.h (struct language_arch_info) <primitive_type_symbols>:
New member.
(language_lookup_primitive_type): Add function comment.
(language_lookup_primitive_type_as_symbol): Declare.
* printcmd.c (address_info): Handle arch-owned symbols.
* python/py-symbol.c (sympy_get_symtab): Ditto.
(set_symbol): Ditto.
(sympy_dealloc): Ditto.
* symmisc.c (print_symbol): Ditto.
* symtab.c (fixup_symbol_section): Ditto.
(lookup_symbol_aux): Initialize block_found.
(basic_lookup_symbol_nonlocal): Try looking up the symbol as a
primitive type.
(initialize_objfile_symbol_1): New function.
(initialize_objfile_symbol): Call it.
(allocate_symbol): Call it.
(allocate_template_symbol): Call it.
(symbol_objfile): Assert symbol is objfile-owned.
(symbol_arch, symbol_symtab, symbol_set_symtab): Ditto.
* symtab.h (struct symbol) <owner>: Replaces member "symtab".
(struct symbol) <is_objfile_owned>: New member.
(SYMBOL_OBJFILE_OWNED): New macro.
* cp-namespace.c (cp_lookup_bare_symbol): New arg langdef.
All callers updated. Try to find the symbol as a primitive type.
(lookup_namespace_scope): New arg langdef. All callers updated.
Call cp_lookup_bare_symbol directly for simple bare symbols.
That's right, block_lookup_symbol_primary()'s additional requirement over
block_lookup_symbol() is:
Function is useful if one iterates all global/static blocks of an
objfile.
Which is satisfied both in lookup_symbol_in_objfile_symtabs() and in
lookup_global_symbol_from_objfile() thanks to their's ALL_OBJFILE_COMPUNITS.
In fact after reverting that ba715d7fe4 above
the lines of code were exactly the same.
So instead of accelerating both lookup_symbol_in_objfile_symtabs() and
lookup_global_symbol_from_objfile() I just accelerated
lookup_symbol_in_objfile_symtabs() and I am proposing to reuse
lookup_symbol_in_objfile_symtabs() in lookup_global_symbol_from_objfile()
instead. In fact such unification would already save some lines of code even
before the checked-in acceleration patch above.
gdb/ChangeLog
2014-12-05 Jan Kratochvil <jan.kratochvil@redhat.com>
* symtab.c (lookup_symbol_in_objfile_symtabs): New declaration.
(lookup_global_symbol_from_objfile): Call it.
I am just not sure if we should go the route of
struct objfile * -> const struct objfile *
or the other way of:
const struct objfile * -> struct objfile *
Normally const adding is better but here I do not see much useful to have any
struct objfile * const and then it just causes pointer compatibility problems.
On Wed, 03 Dec 2014 18:18:44 +0100, Doug Evans wrote:
struct objfile is one case where I've decided to just leave the const
out and not worry about it.
gdb/ChangeLog
2014-12-05 Jan Kratochvil <jan.kratochvil@redhat.com>
Remove const from struct objfile *.
* solib-darwin.c, solib-spu.c, solib-svr4.c, solib.c, solist.h,
symtab.c, symtab.h: In these files.
During debugging I get 10-30 seconds for a response to simple commands like:
(gdb) print vectorvar.size()
With this patch the performance gets to 1-2 seconds which is somehow
acceptable. The problem is that dwarf2_gdb_index_functions.lookup_symbol
(quick_symbol_functions::lookup_symbol) may return (and returns) NULL even for
symbols which are present in .gdb_index but which can be found in already
expanded symtab. But searching in the already expanded symtabs is just too
slow when there are 400000+ expanded symtabs. There would be needed some
single global hash table for each objfile so that one does not have to iterate
all symtabs. Which .gdb_index could perfectly serve for, just its
lookup_symbol() would need to return authoritative yes/no answers.
Even after such fix these two simple patches are useful for example for
non-.gdb_index files.
One can reproduce the slugging interactive GDB performance with:
#include <string>
using namespace std;
string var;
class C {
public:
void m() {}
};
int main() {
C c;
c.m();
return 0;
}
g++ -o slow slow.C -Wall -g $(pkg-config --libs gtkmm-3.0)
gdb ./slow -ex 'b C::m' -ex 'maintenance set per-command space' -ex 'maintenance set per-command symtab' -ex 'maintenance set per-command
time' -ex r
[...]
(gdb) p <tab><tab>
Display all 183904 possibilities? (y or n) n
(gdb) p/r var
$1 = {static npos = <optimized out>, _M_dataplus = {<std::allocator<char>> = {<__gnu_cxx::new_allocator<char>> = {<No data fields>}, <No
data fields>}, _M_p = 0x3a4db073d8 <std::string::_Rep::_S_empty_rep_storage+24> ""}}
Command execution time: 20.023000 (cpu), 20.118665 (wall)
^^^^^^^^^
Space used: 927997952 (+0 for this command)
Without DWZ there are X global blocks for X primary symtabs for X CUs of
objfile. With DWZ there are X+Y global blocks for X+Y primary symtabs for
X+Y CUs where Y are 'DW_TAG_partial_unit's.
For 'DW_TAG_partial_unit's (Ys) their blockvector is usually empty. But not
always, I have found there typedef symbols, there can IMO be optimized-out
static variables etc.
Neither of the patches should cause any visible behavior change.
gdb/ChangeLog
2014-12-04 Jan Kratochvil <jan.kratochvil@redhat.com>
* block.c (block_lookup_symbol_primary): New function.
* block.h (block_lookup_symbol_primary): New declaration.
* symtab.c (lookup_symbol_in_objfile_symtabs): Assert BLOCK_INDEX.
Call block_lookup_symbol_primary.
This patch reverts the addition of cplus_specific added here:
2010-07-16 Sami Wagiaalla <swagiaal@redhat.com>
* symtab.h (symbol_set_demangled_name): Now takes an optional objfile*
argument.
(cplus_specific): New struct.
* symtab.c (symbol_set_demangled_name): Updated.
Use cplus_specific for cplus symbols.
(symbol_get_demangled_name): Retrive the name from the cplus_specific
struct for cplus symbols.
(symbol_init_language_specific): Set cplus_specific for cplus symbols.
(symbol_set_names): Pass objfile to symbol_set_demangled_name.
* symtab.c (symbol_init_cplus_specific): New function.
It was added in anticipation of improved template support:
https://sourceware.org/ml/gdb-patches/2010-05/msg00594.htmlhttps://sourceware.org/ml/gdb-patches/2010-07/msg00284.html
However, minsyms pay the price for this space too.
For my standard benchmark this patch gets back 44MB of memory
when gdb starts. [There's still ~440MB of memory used
by the demangled ELF symbols of this benchmark, but that's another topic.]
When the improved templated support is added,
I wonder if this can be moved to struct symbol.
Hmmm, we already have a special version of
struct symbol for templates (struct template_symbol).
gdb/ChangeLog:
* symtab.c (symbol_init_cplus_specific): Delete.
(symbol_set_demangled_name): Remove special c++ support.
(symbol_get_demangled_name, symbol_set_language): Ditto.
* symtab.h (struct cplus_specific): Delete.
(struct general_symbol_info) <language_specific>: Remove
cplus_specific.
Currently "symtabs" in gdb are stored as a single linked list of
struct symtab that contains both symbol symtabs (the blockvectors)
and file symtabs (the linetables).
This has led to confusion, bugs, and performance issues.
This patch is conceptually very simple: split struct symtab into
two pieces: one part containing things common across the entire
compilation unit, and one part containing things specific to each
source file.
Example.
For the case of a program built out of these files:
foo.c
foo1.h
foo2.h
bar.c
foo1.h
bar.h
Today we have a single list of struct symtabs:
objfile -> foo.c -> foo1.h -> foo2.h -> bar.c -> foo1.h -> bar.h -> NULL
where "->" means the "next" pointer in struct symtab.
With this patch, that turns into:
objfile -> foo.c(cu) -> bar.c(cu) -> NULL
| |
v v
foo.c bar.c
| |
v v
foo1.h foo1.h
| |
v v
foo2.h bar.h
| |
v v
NULL NULL
where "foo.c(cu)" and "bar.c(cu)" are struct compunit_symtab objects,
and the files foo.c, etc. are struct symtab objects.
So now, for example, when we want to iterate over all blockvectors
we can now just iterate over the compunit_symtab list.
Plus a lot of the data that was either unused or replicated for each
symtab in a compilation unit now lives in struct compunit_symtab.
E.g., the objfile pointer, the producer string, etc.
I thought of moving "language" out of struct symtab but there is
logic to try to compute the language based on previously seen files,
and I think that's best left as is for now.
With my standard monster benchmark with -readnow (which I can't actually
do, but based on my calculations), whereas today the list requires
77MB to store all the struct symtabs, it now only requires 37MB.
A modest space savings given the gigabytes needed for all the debug info,
etc. Still, it's nice. Plus, whereas today we create a copy of dirname
for each source file symtab in a compilation unit, we now only create one
for the compunit.
So this patch is basically just a data structure reorg,
I don't expect significant performance improvements from it.
Notes:
1) A followup patch can do a similar split for struct partial_symtab.
I have left that until after I get the changes I want in to
better utilize .gdb_index (it may affect how we do partial syms).
2) Another followup patch *could* rename struct symtab.
The term "symtab" is ambiguous and has been a source of confusion.
In this patch I'm leaving it alone, calling it the "historical" name
of "filetabs", which is what they are now: just the file-name + line-table.
gdb/ChangeLog:
Split struct symtab into two: struct symtab and compunit_symtab.
* amd64-tdep.c (amd64_skip_xmm_prologue): Fetch producer from compunit.
* block.c (blockvector_for_pc_sect): Change "struct symtab *" argument
to "struct compunit_symtab *". All callers updated.
(set_block_compunit_symtab): Renamed from set_block_symtab. Change
"struct symtab *" argument to "struct compunit_symtab *".
All callers updated.
(get_block_compunit_symtab): Renamed from get_block_symtab. Change
result to "struct compunit_symtab *". All callers updated.
(find_iterator_compunit_symtab): Renamed from find_iterator_symtab.
Change result to "struct compunit_symtab *". All callers updated.
* block.h (struct global_block) <compunit_symtab>: Renamed from symtab.
hange type to "struct compunit_symtab *". All uses updated.
(struct block_iterator) <d.compunit_symtab>: Renamed from "d.symtab".
Change type to "struct compunit_symtab *". All uses updated.
* buildsym.c (struct buildsym_compunit): New struct.
(subfiles, buildsym_compdir, buildsym_objfile, main_subfile): Delete.
(buildsym_compunit): New static global.
(finish_block_internal): Update to fetch objfile from
buildsym_compunit.
(make_blockvector): Delete objfile argument.
(start_subfile): Rewrite to use buildsym_compunit. Don't initialize
debugformat, producer.
(start_buildsym_compunit): New function.
(free_buildsym_compunit): Renamed from free_subfiles_list.
All callers updated.
(patch_subfile_names): Rewrite to use buildsym_compunit.
(get_compunit_symtab): New function.
(get_macro_table): Delete argument comp_dir. All callers updated.
(start_symtab): Change result to "struct compunit_symtab *".
All callers updated. Create the subfile of the main source file.
(watch_main_source_file_lossage): Rewrite to use buildsym_compunit.
(reset_symtab_globals): Update.
(end_symtab_get_static_block): Update to use buildsym_compunit.
(end_symtab_without_blockvector): Rewrite.
(end_symtab_with_blockvector): Change result to
"struct compunit_symtab *". All callers updated.
Update to use buildsym_compunit. Don't set symtab->dirname,
instead set it in the compunit.
Explicitly make sure main symtab is first in its list.
Set debugformat, producer, blockvector, block_line_section, and
macrotable in the compunit.
(end_symtab_from_static_block): Change result to
"struct compunit_symtab *". All callers updated.
(end_symtab, end_expandable_symtab): Ditto.
(set_missing_symtab): Change symtab argument to
"struct compunit_symtab *". All callers updated.
(augment_type_symtab): Ditto.
(record_debugformat): Update to use buildsym_compunit.
(record_producer): Update to use buildsym_compunit.
* buildsym.h (struct subfile) <dirname>: Delete.
<producer, debugformat>: Delete.
<buildsym_compunit>: New member.
(get_compunit_symtab): Declare.
* dwarf2read.c (struct type_unit_group) <compunit_symtab>: Renamed
from primary_symtab. Change type to "struct compunit_symtab *".
All uses updated.
(dwarf2_start_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dwarf_decode_macros): Delete comp_dir argument. All callers updated.
(struct dwarf2_per_cu_quick_data) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
(dw2_instantiate_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dw2_find_last_source_symtab): Ditto.
(dw2_lookup_symbol): Ditto.
(recursively_find_pc_sect_compunit_symtab): Renamed from
recursively_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(dw2_find_pc_sect_compunit_symtab): Renamed from
dw2_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(get_compunit_symtab): Renamed from get_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(recursively_compute_inclusions): Change type of immediate_parent
argument to "struct compunit_symtab *". All callers updated.
(compute_compunit_symtab_includes): Renamed from
compute_symtab_includes. All callers updated. Rewrite to compute
includes of compunit_symtabs and not symtabs.
(process_full_comp_unit): Update to work with struct compunit_symtab.
(process_full_type_unit): Ditto.
(dwarf_decode_lines_1): Delete argument comp_dir. All callers updated.
(dwarf_decode_lines): Remove special case handling of main subfile.
(macro_start_file): Delete argument comp_dir. All callers updated.
(dwarf_decode_macro_bytes): Ditto.
* guile/scm-block.c (bkscm_print_block_syms_progress_smob): Update to
use struct compunit_symtab.
* i386-tdep.c (i386_skip_prologue): Fetch producer from compunit.
* jit.c (finalize_symtab): Build compunit_symtab.
* jv-lang.c (get_java_class_symtab): Change result to
"struct compunit_symtab *". All callers updated.
* macroscope.c (sal_macro_scope): Fetch macro table from compunit.
* macrotab.c (struct macro_table) <compunit_symtab>: Renamed from
comp_dir. Change type to "struct compunit_symtab *".
All uses updated.
(new_macro_table): Change comp_dir argument to cust,
"struct compunit_symtab *". All callers updated.
* maint.c (struct cmd_stats) <nr_compunit_symtabs>: Renamed from
nr_primary_symtabs. All uses updated.
(count_symtabs_and_blocks): Update to handle compunits.
(report_command_stats): Update output, "primary symtabs" renamed to
"compunits".
* mdebugread.c (new_symtab): Change result to
"struct compunit_symtab *". All callers updated.
(parse_procedure): Change type of search_symtab argument to
"struct compunit_symtab *". All callers updated.
* objfiles.c (objfile_relocate1): Loop over blockvectors in a
separate loop.
* objfiles.h (struct objfile) <compunit_symtabs>: Renamed from
symtabs. Change type to "struct compunit_symtab *". All uses updated.
(ALL_OBJFILE_FILETABS): Renamed from ALL_OBJFILE_SYMTABS.
All uses updated.
(ALL_OBJFILE_COMPUNITS): Renamed from ALL_OBJFILE_PRIMARY_SYMTABS.
All uses updated.
(ALL_FILETABS): Renamed from ALL_SYMTABS. All uses updated.
(ALL_COMPUNITS): Renamed from ALL_PRIMARY_SYMTABS. All uses updated.
* psympriv.h (struct partial_symtab) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
* psymtab.c (psymtab_to_symtab): Change result type to
"struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab_from_partial): Renamed from
find_pc_sect_symtab_from_partial. Change result type to
"struct compunit_symtab *". All callers updated.
(lookup_symbol_aux_psymtabs): Change result type to
"struct compunit_symtab *". All callers updated.
(find_last_source_symtab_from_partial): Ditto.
* python/py-symtab.c (stpy_get_producer): Fetch producer from compunit.
* source.c (forget_cached_source_info_for_objfile): Fetch debugformat
and macro_table from compunit.
* symfile-debug.c (debug_qf_find_last_source_symtab): Change result
type to "struct compunit_symtab *". All callers updated.
(debug_qf_lookup_symbol): Ditto.
(debug_qf_find_pc_sect_compunit_symtab): Renamed from
debug_qf_find_pc_sect_symtab, change result type to
"struct compunit_symtab *". All callers updated.
* symfile.c (allocate_symtab): Delete objfile argument.
New argument cust.
(allocate_compunit_symtab): New function.
(add_compunit_symtab_to_objfile): New function.
* symfile.h (struct quick_symbol_functions) <lookup_symbol>:
Change result type to "struct compunit_symtab *". All uses updated.
<find_pc_sect_compunit_symtab>: Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All uses updated.
* symmisc.c (print_objfile_statistics): Compute blockvector count in
separate loop.
(dump_symtab_1): Update test for primary source symtab.
(maintenance_info_symtabs): Update to handle compunit symtabs.
(maintenance_check_symtabs): Ditto.
* symtab.c (set_primary_symtab): Delete.
(compunit_primary_filetab): New function.
(compunit_language): New function.
(iterate_over_some_symtabs): Change type of arguments "first",
"after_last" to "struct compunit_symtab *". All callers updated.
Update to loop over symtabs in each compunit.
(error_in_psymtab_expansion): Rename symtab argument to cust,
and change type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab): Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_compunit_symtab): Renamed from find_pc_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_line): Only loop over symtabs within selected compunit
instead of all symtabs in the objfile.
* symtab.h (struct symtab) <blockvector>: Moved to compunit_symtab.
<compunit_symtab> New member.
<block_line_section>: Moved to compunit_symtab.
<locations_valid>: Ditto.
<epilogue_unwind_valid>: Ditto.
<macro_table>: Ditto.
<dirname>: Ditto.
<debugformat>: Ditto.
<producer>: Ditto.
<objfile>: Ditto.
<call_site_htab>: Ditto.
<includes>: Ditto.
<user>: Ditto.
<primary>: Delete
(SYMTAB_COMPUNIT): New macro.
(SYMTAB_BLOCKVECTOR): Update definition.
(SYMTAB_OBJFILE): Update definition.
(SYMTAB_DIRNAME): Update definition.
(struct compunit_symtab): New type. Common members among all source
symtabs within a compilation unit moved here. All uses updated.
(COMPUNIT_OBJFILE): New macro.
(COMPUNIT_FILETABS): New macro.
(COMPUNIT_DEBUGFORMAT): New macro.
(COMPUNIT_PRODUCER): New macro.
(COMPUNIT_DIRNAME): New macro.
(COMPUNIT_BLOCKVECTOR): New macro.
(COMPUNIT_BLOCK_LINE_SECTION): New macro.
(COMPUNIT_LOCATIONS_VALID): New macro.
(COMPUNIT_EPILOGUE_UNWIND_VALID): New macro.
(COMPUNIT_CALL_SITE_HTAB): New macro.
(COMPUNIT_MACRO_TABLE): New macro.
(ALL_COMPUNIT_FILETABS): New macro.
(compunit_symtab_ptr): New typedef.
(DEF_VEC_P (compunit_symtab_ptr)): New vector type.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Update expected output.
Basically the problem is that "symtab" is ambiguous.
Is it the primary symtab (where we canonically think of
blockvectors as being stored) or is it for a specific file
(where each file's line table is stored) ?
gdb_disassembly wants the symtab that contains the line table
but is instead getting the primary symtab.
gdb/ChangeLog:
PR symtab/17559
* symtab.c (find_pc_line_symtab): New function.
* symtab.h (find_pc_line_symtab): Declare.
* disasm.c (gdb_disassembly): Call find_pc_line_symtab instead of
find_pc_symtab.
* tui/tui-disasm.c (tui_set_disassem_content): Ditto.
* tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Ditto.
* tui/tui-source.c (tui_vertical_source_scroll): Ditto.
* tui/tui-win.c (make_visible_with_new_height): Ditto.
* tui/tui-winsource.c (tui_horizontal_source_scroll): Ditto.
(tui_display_main): Call find_pc_line_symtab instead of find_pc_line.
gdb/testsuite/ChangeLog:
PR symtab/17559
* gdb.base/line-symtabs.exp: New file.
* gdb.base/line-symtabs.c: New file.
* gdb.base/line-symtabs.h: New file.
This patch just renames one function.
Its only caller is in stack.c where we're printing a backtrace
with non-zero info_verbose and we want to make sure all the needed
symtabs are expanded before printing the backtrace
so that debug symbol reading messages don't pollute the backtrace.
I think the new name of the function makes clearer to the reader
what is going on.
gdb/ChangeLog:
* symtab.c (expand_symtab_containing_pc): Renamed from
find_pc_sect_symtab_via_partial. All callers updated.
When searching static symbols, gdb would search over all
expanded symtabs of all objfiles, and if that fails only then
would it search all partial/gdb_index tables of all objfiles.
This means that the user could get a random instance of the
symbol depending on what symtabs have been previously expanded.
Now the search is consistent, searching each objfile completely
before proceeding to the next one.
gdb/ChangeLog:
PR symtab/17564
* symtab.c (lookup_symbol_in_all_objfiles): Delete.
(lookup_static_symbol): Move definition to new location and rewrite.
(lookup_symbol_in_objfile): New function.
(lookup_symbol_global_iterator_cb): Call it.
gdb/testsuite/ChangeLog:
PR symtab/17564
* gdb.base/symtab-search-order.exp: New file.
* gdb.base/symtab-search-order.c: New file.
* gdb.base/symtab-search-order-1.c: New file.
* gdb.base/symtab-search-order-shlib-1.c: New file.
The in_prologue check in the nexti code is obsolete; this commit
removes that, and then removes the in_prologue function as nothing
else uses it.
Looking at the code in GDB that makes use in_prologue, all we find is
this one caller:
if ((ecs->event_thread->control.step_over_calls == STEP_OVER_NONE)
|| ((ecs->event_thread->control.step_range_end == 1)
&& in_prologue (gdbarch, ecs->event_thread->prev_pc,
ecs->stop_func_start)))
{
/* I presume that step_over_calls is only 0 when we're
supposed to be stepping at the assembly language level
("stepi"). Just stop. */
/* Also, maybe we just did a "nexti" inside a prolog, so we
thought it was a subroutine call but it was not. Stop as
well. FENN */
/* And this works the same backward as frontward. MVS */
end_stepping_range (ecs);
return;
}
This was added by:
commit 100a02e1de
...
From Fernando Nasser:
* infrun.c (handle_inferior_event): Handle "nexti" inside function
prologues.
The mailing list thread is here:
https://sourceware.org/ml/gdb-patches/2001-01/msg00047.html
Not much discussion there, and no test, but looking at the code around
what was patched in that revision, we see that the checks that detect
whether the program has just stepped into a subroutine didn't rely on
the unwinders at all back then.
From 'git show 100a02e1:gdb/infrun.c':
if (stop_pc == ecs->stop_func_start /* Quick test */
|| (in_prologue (stop_pc, ecs->stop_func_start) &&
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
!IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, ecs->stop_func_name))
|| IN_SOLIB_CALL_TRAMPOLINE (stop_pc, ecs->stop_func_name)
|| ecs->stop_func_name == 0)
{
/* It's a subroutine call. */
if ((step_over_calls == STEP_OVER_NONE)
|| ((step_range_end == 1)
&& in_prologue (prev_pc, ecs->stop_func_start)))
{
/* I presume that step_over_calls is only 0 when we're
supposed to be stepping at the assembly language level
("stepi"). Just stop. */
/* Also, maybe we just did a "nexti" inside a prolog,
so we thought it was a subroutine call but it was not.
Stop as well. FENN */
stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
return;
}
Stripping the IN_SOLIB_RETURN_TRAMPOLINE checks for simplicity, we had:
if (stop_pc == ecs->stop_func_start /* Quick test */
|| in_prologue (stop_pc, ecs->stop_func_start)
|| ecs->stop_func_name == 0)
{
/* It's a subroutine call. */
That is, detecting a subroutine call was based on prologue detection
back then. So the in_prologue check in the current tree only made
sense back then as it was undoing a bad decision the in_prologue check
that used to exist above did.
Today, the check for a subroutine call relies on frame ids instead,
which are stable throughout the function. So we can just remove the
in_prologue check for nexti, and the whole in_prologue function along
with it.
Tested on x86_64 Fedora 20, and also by nexti-ing manually a prologue.
gdb/
2014-11-07 Pedro Alves <palves@redhat.com>
* infrun.c (process_event_stop_test) <subroutine check>: Don't
check if we did a "nexti" inside a prologue.
* symtab.c (in_prologue): Delete function.
* symtab.h (in_prologue): Delete declaration.
"aux" doesn't contribute anything to the name, and it makes the
reader wonder what it's supposed to mean.
gdb/ChangeLog:
* symtab.c (lookup_local_symbol): Renamed from lookup_symbol_aux_local.
All callers updated.
(lookup_symbol_in_all_objfiles): Renamed from
lookup_symbol_aux_symtabs. All callers updated.
(lookup_symbol_via_quick_fns): Renamed from lookup_symbol_aux_quick.
All callers updated.
(lookup_symbol_in_objfile_symtabs): Renamed from
lookup_symbol_aux_objfile. All callers updated.
and lookup_static_symbol_aux to lookup_static_symbol.
gdb/ChangeLog:
* symtab.c (lookup_static_symbol): Renamed from
lookup_static_symbol_aux. All callers updated.
(lookup_symbol_in_static_block): Renamed from lookup_symbol_static.
All callers updated.
gdb/ChangeLog:
* block.h (ALL_BLOCK_SYMBOLS_WITH_NAME): New macro.
* block.c (block_lookup_symbol): Use it.
* cp-support.c (make_symbol_overload_list_block): Use it.
* symtab.c (iterate_over_symbols): Use it.
There is another function, lookup_symbol_aux_block, and
the names lookup_block_symbol and lookup_symbol_aux_block don't
convey any real difference between them.
The difference is that lookup_block_symbol lives in the lower level
block API, and lookup_symbol_aux_block lives in the higher level symtab API.
This patch makes this distinction clear.
gdb/ChangeLog:
* symtab.c (lookup_block_symbol): Moved to ...
* block.c (block_lookup_symbol): ... here and renamed.
All callers updated.
* block.h (block_lookup_symbol): Declare.
* symtab.h (lookup_block_symbol): Delete.
Non-primary symtabs share the block vector with their primary symtabs.
In these cases there's no need to use ALL_SYMTABS.
gdb/ChangeLog:
* ada-lang.c (ada_make_symbol_completion_list): Use
ALL_PRIMARY_SYMTABS instead of ALL_SYMTABS.
* symtab.c (lookup_objfile_from_block): Ditto.
