* config/tc-ppc.c (md_parse_option): BookE is not Motorola specific.
[include/opcode/ChangeLog]
* ppc.h (PPC_OPCODE_BOOKE): BookE is not Motorola specific.
(PPC_OPCODE_BOOKE64): Likewise.
R_SPARC_DISP32. Support R_SPARC_PLT32.
(sparc_reloc_map): Add BFD_RELOC_16_PCREL and BFD_RELOC_SPARC_PLT32.
(elf32_sparc_check_relocs): Handle R_SPARC_PLT32.
(elf32_sparc_relocate_section): Likewise.
* elf64-sparc.c (sparc64_elf_howto_table): Fix dst_mask for
R_SPARC_DISP32. Support R_SPARC_PLT32 and R_SPARC_PLT64.
(sparc_reloc_map): Add BFD_RELOC_16_PCREL, BFD_RELOC_64_PCREL
and BFD_RELOC_SPARC_PLT32.
(sparc64_elf_check_relocs): Handle R_SPARC_PLT32 and R_SPARC_PLT64.
(sparc64_elf_relocate_section): Likewise.
* reloc.c (bfd_reloc_code_type): Add BFD_RELOC_SPARC_PLT32.
* bfd-in2.h, libbfd.h: Rebuilt.
* config/tc-sparc.h (TC_PARSE_CONS_EXPRESSION): Define.
(sparc_cons): Provide prototype.
* config/tc-sparc.c (tc_gen_reloc): Handle BFD_RELOC_*_PCREL and
BFD_RELOC_SPARC_PLT{32,64}. Enumerate for which relocs
reloc->addend = fixp->fx_addnumber shouldn't be done instead of
enumarating for which pc relative ones it should be done.
(sparc_cons_special_reloc): New variable.
(sparc_cons): New function.
(cons_fix_new_sparc): Use sparc_cons_special_reloc.
* testsuite/gas/sparc/pcrel.s: New test.
* testsuite/gas/sparc/pcrel.d: Expected output.
* testsuite/gas/sparc/pcrel64.s: New test.
* testsuite/gas/sparc/pcrel64.d: Expected output.
* testsuite/gas/sparc/plt.s: New test.
* testsuite/gas/sparc/plt.d: Expected output.
* testsuite/gas/sparc/plt64.s: New test.
* testsuite/gas/sparc/plt64.d: Expected output.
* testsuite/gas/sparc/sparc.exp: Add pcrel, pcrel64, plt and plt64
tests.
(m68*-*-netbsd): Also include bfd_elf32_m68k_vec.
(m68*-*-netbsdaout*): New alias for m68*-*-netbsd.
* configure.in (m68k-*-netbsdelf*): New target.
(m68k-*-netbsd*): Also include ELF support.
(m68k-*-netbsdaout*): New alias for m68*-*-netbsd*.
* configure: Regenerate.
* Makefile.am (ALL_EMULATIONS): Add m68kelfnbsd.o.
(m68kelfnbsd.c): New rule.
* Makefile.in: Regenerate.
* configure.tgt (m68*-hp-netbsd*): Renamed to ..
(m68*-*-netbsd*4k*): .. this.
(m68*-*-netbsdelf*): New target.
(m68*-*-netbsd*): Also include ELF support.
(m68*-*-netbsdaout*): New alias for m68*-*-netbsd*.
* emulparams/m68kelfnbsd.sh: New emulation.
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
Corinna Vinschen <vinschen@redhat.com>
* Makefile.am: Add support for xstormy16.
* archures.c: Add support for xstormy16.
* config.bfd: Add support for xstormy16.
* configure.in: Add support for xstormy16.
* reloc.c: Add support for xstormy16.
* targets.c: Add support for xstormy16.
* cpu-xstormy16.c: New file.
* elf32-xstormy16.c: New file.
* Makefile.in: Regenerated.
* bfd-in2.h: Regenerated.
* configure: Regenerated.
* libbfd.h: Regenerated.
Index: binutils/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* readelf.c (guess_is_rela): Add support for stormy16.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
Index: gas/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* configure.in: Add support for xstormy16.
* configure: Regenerated.
* Makefile.am: Add support for xstormy16.
* Makefile.in: Regenerated.
* config/tc-xstormy16.c: New file.
* config/tc-xstormy16.h: New file.
Index: gas/testsuite/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
matthew green <mrg@redhat.com>
* gas/xstormy16/allinsn.d: New file.
* gas/xstormy16/allinsn.exp: New file.
* gas/xstormy16/allinsn.s: New file.
* gas/xstormy16/allinsn.sh: New file.
* gas/xstormy16/gcc.d: New file.
* gas/xstormy16/gcc.s: New file.
* gas/xstormy16/gcc.sh: New file.
* gas/xstormy16/reloc-1.d: New file.
* gas/xstormy16/reloc-1.s: New file.
* gas/xstormy16/reloc-2.d: New file.
* gas/xstormy16/reloc-2.s: New file.
Index: ld/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* Makefile.am: Add support for xstormy16.
* configure.tgt: Add support for xstormy16.
* Makefile.in: Regenerate.
* emulparams/elf32xstormy16.sh: New file.
* scripttempl/xstormy16.sc: New file.
Index: opcodes/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* Makefile.am: Add support for xstormy16.
* Makefile.in: Regenerate.
* configure.in: Add support for xstormy16.
* configure: Regenerate.
* disassemble.c: Add support for xstormy16.
* xstormy16-asm.c: New generated file.
* xstormy16-desc.c: New generated file.
* xstormy16-desc.h: New generated file.
* xstormy16-dis.c: New generated file.
* xstormy16-ibld.c: New generated file.
* xstormy16-opc.c: New generated file.
* xstormy16-opc.h: New generated file.
Index: include/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* dis-asm.h (print_insn_xstormy16): Declare.
Index: include/elf/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* common.h (EM_XSTORMY16): Define.
* xstormy16.h: New file.
cond_offset. Rename variants->variant.
(insns): Adjust for new format. Explicitly code each variant that
takes flags. Remove temporary instructions.
(struct arm_it): Remove redundant field suffix.
(s_flag, ldr_flags, str_flags, byte_flag, cmp_flags, ldm_flags)
(stm_flags, lfm_flags, sfm_flags, round_flags, fix_flags, except_flag)
(long_flag): Delete.
(struct asm_flg): Delete.
(LONGEST_INST): Delete.
(V4_STR_BIT): Define.
(struct thumb_opcode): Rename variants->variant.
(do_empty): Renamed from do_nop.
(ldst_extend): Delete argument hwse. Split code for half-word and
signed byte instructions to ...
(ldst_extend_v4): ... here.
(ld_mode_required_here): Use ldst_extend_v4.
(do_ldrd): Simplify now that this is only called for ldrd. No
need to test for XScale, which was wrong anyway. Don't reject r12
as a target register. Add test that ldrd doesn't update an index
register.
(do_pld): Don't allow post-indexed or write-back addressing modes.
Adjust call to ldst_extend.
(do_adr): Split code for adrl to ...
(do_adrl): ... here.
(do_cmp): No need to fold in COND_BIT.
(do_ldst): Simplify. Split code for ldrt/strt into do_ldstt. Split
code to handle half-word and signed byte instructions to ...
(do_ldstv4): ... here.
(do_ldstt): New function. Handle load/store with translate.
(do_ldmstm): Write feature modification bits directly into
inst.instruction.
(do_fpa_ldst): Remove suffix handling code.
(do_fpa_dyadic, do_fpa_monadic, do_fpa_from_reg): Likewise.
(do_fpa_ldmstm): Type of access is now held in inst.instruction.
(build_arm_ops_hsh): New function.
(md_begin): Call it. Don't build the ARM opcode directly.
(md_assemble): Simplify ARM instruction handling.
* stabs.c (stabs_generate_asm_lineno): Remember file and line number
from one call to the next, and eliminate consecutive duplicates
(thereby emitting only one line symbol per source line).
* dwarf2dbg.c (dwarf2_gen_line_info): Ditto.
(elf64_alpha_relocate_section): Translate local_got_entries
for STT_SECTION symbol to SHF_MERGE section the first time
we see it.
* elfxx-ia64.c (struct elfNN_ia64_local_hash_entry): Add
sec_merge_done.
(get_local_sym_hash): New, extracted from get_dyn_sym_info.
(get_dyn_sym_info): Use it.
(elfNN_ia64_relocate_section): Translate local dyn entries
for STT_SECTION symbol to SHF_MERGE section the first time
we see it.
* write.c (adjust_reloc_syms): Mark SEC_MERGE symbols as used
in reloc if it has non-zero addend.
* config/tc-alpha.c (tc_gen_reloc): Reinstall SEC_MERGE check.
* config/tc-sparc.c (md_apply_fix3): Likewise.
(md_apply_fix3): ...here. Don't prevent the symbol value being
subtracted twice from GPREL addends.
(tc_gen_reloc): Add the symbol value to a GPREL addend if it was
subtracted by the previous function.
(md_longopts): Allow OPTION_MABI for ELF compilation only. RE-allow
OPTION_GP32, OPTION_GP64, OPTION_FP32 for non-ELF compilation.
Sort options a bit more logical.
(md_parse_option): Allow OPTION_32, OPTION_N32, OPTION_N64,
OPTION_MABI only for elf targets.
* gas/mips/mips.exp: Change naming of some conditionals to reflect
the object format they actually mean. Don't try mips-abi32 and
mips-abi32-pic tests for ecoff.
mips_set_options.
(mips_set_options): Add members gp32, fp32, abi.
(file_mips_gp32): New flag.
(file_mips_fp32): New flag.
(mips_opts): Initialize the new members.
(mips_gp32): Remove.
(mips_fp32): Remove.
(HAVE_32BIT_GPRS): Use the new values from mips_opts.
(HAVE_32BIT_FPRS): Likewise.
(HAVE_NEWABI): Likewise.
(HAVE_64BIT_OBJECTS): Likewise.
(md_begin): Likewise. Save default (file) values.
(md_parse_option): Use the new values from mips_opts.
(s_mipsset): Likewise. Fix logic to keep the ABI selection if
possible. Let .set mipsN work together with .set push/pop.
Enhance error messages.
(mips_elf_final_processing): Use file_mips_* for header processing.
the page man title.
* doc/Makefile.in: Rebuild.
* doc/as.texinfo: Do not put man SEEALSO in document;
Use @command for commands, @option for options; Reorganize usage
to clearly identify target specific options.
2001-11-04 Chris Demetriou <cgd@broadcom.com>
* configure.in (mips-*-netbsd*): Add support for target.
* configure: Regenerate.
[ gas/testsuite/ChangeLog ]
2001-11-04 Chris Demetriou <cgd@broadcom.com>
* gas/mips/mips.exp (svr4pic): Set if target is *-*-netbsd*.
(aout): Don't set if *-*-netbsd*.
[ ld/ChangeLog ]
2001-11-04 Chris Demetriou <cgd@broadcom.com>
* configure.tgt (mips*el-*-netbsd*, mips*-*-netbsd*):
Add support for targets.
(insns): Re-arrange instructions by archtitecture. Pld instruction
is part of ARMv5E.
(tinsns): blx and bkpt are part of ARMv5T.
(do_fp_{ctrl,ldst,ldstm,dyadic,monadic,cmp,from_reg,to_reg}): Rename
to do_fpa_*. All callers changed.
* tc-arm.c (insns): Add two temporary instructions to handle
ldrd/strd.
2001-10-31 Chris Demetriou <cgd@demetriou.com>
* elf32-mips.c (_bfd_mips_elf_hi16_reloc): Handle PC-relative
relocations properly.
[ gas/ChangeLog ]
2001-10-31 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (HAVE_32BIT_ADDRESSES): If compiling embedded
PIC code, assume pointers the same size as GPRs.
(macro): In M_LA_AB handling for embedded PIC code, support
"la $treg,foo-bar($breg)". In load/store handling
(label ld_st) support "<op> $treg,<sym>-<local_sym>($breg)"
which is used by the compiler for switch statements.
In load/store double multi-instruction macro handling
(label ldd_std) add a comment that no special handling
is currently done for embedded PIC.
(mips_ip): In 'o' (16-bit offset) case, only accept 16
bit offsets.
[ gas/testsuite/ChangeLog ]
2001-10-31 Chris Demetriou <cgd@broadcom.com>
* gas/mips/empic.s: Undo damage inflicted on 2000-12-02.
* gas/mips/empic.d: Likewise.
* gas/mips/elempic.d: Likewise (it was copied into other files).
* gas/mips/telempic.d: Likewise.
* gas/mips/tempic.d: Likewise.
* gas/mips/empic2.s: New test to check new 'la' and 'lw' (and
related ops) syntax, test loads with large offsets.
* gas/mips/emcic2.d: Likewise.
* gas/mips/mips.exp: Run the new test on ELF platforms.
* tc-arm.c (ARM_EXT_LONGMUL, ARM_EXT_HALFWORD, ARM_EXT_THUMB): Delete.
(ARM_2UP, ARM_ALL, ARM_3UP, ARM_6UP): Delete.
(FPU_CORE, FPU_FPA10, FPA_FPA11, FPU_ALL, FPA_MEMMULTI): Delete.
(ARM_EXT_V{1,2,2S,3,3M,4,4T,5T,5ExP}): New defines.
(ARM_EXT_V{5,5E}): Synchronize with above.
(ARM_ARCH_V*): Define a complete set in terms of above features.
(ARM_{1,2,3,250,6,7,8,9,STRONG}): Define in terms of architecture.
(FPU_FPA_EXT_V[12]): Define.
(FPU_ARCH_FPE, FPU_ARCH_FPA): Define in terms of above.
(FPU_ANY): Define.
(FPU_DEFAULT): Default to FPA.
(CPU_DEFAULT): For XScale, this is now just ARM_ARCH_XSCALE; for
Thumb, this is now ARM_ARCH_V5T.
(insns): Rework for new feature defines.
(tinsns): Likewise.
(opcode_select, do_ldst, md_begin, md_parse_option): Likewise.
2001-10-21 Chris Demetriou <cgd@broadcom.com>
* mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
"bltzall" as writing GPR 31 (since they do).
* mips-dis.c (print_insn_arg): Calculate info->target
where appropriate.
(print_insn_mips): Fill in instruction info.
(print_mips16_insn_arg): Remove unneded variable 'val'.
Removed duplicated instruction target calculations,
calculate once and print that result. Use same idiom for
masking the jump segment bits as is used in print_insn_arg.
[gas/testsuite/ChangeLog]
2001-10-21 Chris Demetriou <cgd@broadcom.com>
* gas/mips/beq.s: Add zero words at end of instructions so
that objdump will print "..." when disassembling.
* gas/mips/beq.d: Update for disassembler changes which force
branch delay-slot nops to be printed.
* gas/mips/bge.d: Ditto.
* gas/mips/bgeu.d: Ditto.
* gas/mips/blt.d: Ditto.
* gas/mips/bltu.d: Ditto.
* gas/mips/jal-svr4pic.d: Ditto.
* gas/mips/jal-xgot.d: Ditto.
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* gas/mips/mips.exp (sb1-ext-ps): New test to test
SB-1 core's paired-single extensions to the MIPS64 ISA.
* gas/mips/sb1-ext-ps.d: New file.
* gas/mips/sb1-ext-ps.s: New file.
[include/opcode/ChangeLog]
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* mips.h (INSN_SB1): New cpu-specific instruction bit.
(OPCODE_IS_MEMBER): Allow instructions matching INSN_SB1
if cpu is CPU_SB1.
[opcodes/ChangeLog]
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_isa_type): Make the ISA used to disassemble
SB-1 binaries include instructions specific to the SB-1.
* mips-opc.c (SB1): New definition.
(mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
"recip.ps", "rsqrt.ps", and "sqrt.ps".
(ppc_size): Select PPC_OPCODE_64 if 64 bit.
(md_begin): Don't set ppc_size here.
(ppc_target_format): Test ppc_size as well as BFD_DEFAULT_TARGET_SIZE.
(md_shortopts): Constify.
(md_longopts): Likewise.
(md_longopts_size): Likewise.
(ppc_elf_suffix): Only allow 64-bit relocs when ppc_size specifies
64-bit opcodes.
(ppc_machine): Explain why this function is a nop.
* gas/ppc/booke.s (rfci, wrtee, wrteei, mfdcrx, mfdcr, mtdcrx,
mtdcr, msync, dcba, mbar): New BookE tests.
* gas/ppc/booke.d: Update for new BookE tests.
[opcodes/ChangeLog]
* ppc-opc.c (MO): New macro for MO field of mbar instruction.
(powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
* config/tc-ppc.c (md_parse_option): New -m7410, -m7450 and -m7455
flags, equivalent to -m7400. New -maltivec to enable AltiVec
instructions. New -mbook64 and -mbooke/-mbooke32 flags to enable
64-bit and 32-bit BookE support, respectively. Change -m403 and
-m405 to set PPC403 option.
(md_show_usage): Adjust for new options.
* doc/all.texi: Set PPC.
* doc/as.texinfo: Add PPC support and pull in c-ppc.texi.
* doc/c-ppc.texi: New file.
* doc/Makefile.am (CPU_DOCS): Add c-ppc.texi.
* doc/Makefile.in: Regenerate.
[gas/testsuite/ChangeLog]
* gas/ppc/booke.s: New test for Motorola BookE.
* gas/ppc/booke.d: New file.
* gas/ppc/ppc.exp: Test booke.s.
[include/opcode/ChangeLog]
* ppc.h (PPC_OPCODE_BOOKE, PPC_OPCODE_403): New opcode flags for
BookE and PowerPC403 instructions.
[opcodes/ChangeLog]
* ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
instruction field instruction/extraction functions for new BookE
DE form instructions.
(CT): New macro for CT field in an X form instruction.
(DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
instructions.
(PPC64): Don't include PPC_OPCODE_PPC.
(403): New opcode macro for PPC403 processors.
(BOOKE): New opcode macro for BookE processors.
(bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
(bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
(dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
(stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
(mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
(subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
(subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
(addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
(lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
(stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
(tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
(lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
(stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
(lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
* ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
for a disassembler option of `booke', `booke32' or `booke64' to enable
BookE support in the disassembler.
(mips_cpreturn_register): Likewise.
(mips_gp_register): Likewise.
(s_cpsetup): New function prototype.
(s_cplocal): Likewise.
(s_cpreturn): Likewise.
(s_gpvalue): Likewise.
(mips_pseudo_table): Add .cpsetup, .cplocal, .cpreturn, .gpvalue
pseudo-ops.
(macro): Don't warn about .cprestore for NewABI.
(md_pcrel_from): Code cleanup.
(mips_force_relocation): Force output of some NewABI relocations even
without a defined symbol.
(s_cpload): Ignore .cpload for NewABI.
(s_cpsetup): Handle .cpsetup.
(s_cplocal): Handle .cplocal.
(s_cprestore): Ignore .cprestore for NewABI.
(s_cpreturn): Handle .cpreturn.
(s_gpvalue): Handle .gpvalue.
(s_cpadd): Ignore .cpadd for NewABI.
(nopic_need_relax): Take g_switch_value into account as gp
optimization.
(tc_gen_reloc): Don't handle BFD_RELOC_MIPS_{CALL,GOT}* for NewABI.
(small_ex_type): Named this enum, more return values for
my_getSmallExpression.
(mips_ip): Allow SPC and HT between arguments. Handle some NewABI
triple relocations. Protect some parts with ifdef OBJ_ELF.
(percent_op_match): New struct, lookup table for %some_reloc().
(my_getSmallParser): New function, parses nested percent_ops also.
(my_getSmallExpression): Rewite to support nested percent_ops.
(load_address): Support both 32- and 64-bit addresses.
(macro): Call load_register correctly. Expand 64-bit loads ans stores.
(macro2): Call load_address correctly.
throughout file.
(obj_elf_change_section): Rename "group" to "group_name".
(obj_elf_section): Likewise.
(elf_frob_file): Don't use sec->lineno for SHT_GROUP section to store
first member section; Instead use elf_next_in_group.
Set elf_section_data group from it. Warn if group name changed.
(obj_elf_parse_section_letters): Parse 'G' too.
(obj_elf_section): Parse group name.
(struct group_list): New.
(build_group_lists): New function.
(elf_frob_file): Create SEC_GROUP section(s).
* config/obj-elf.c: (elf_copy_symbol_attributes): Zap trailing
whitespace.
capitalise, no final period or newline, don't say "ignoring" for
as_bad messages. In some cases, change the wording to that used
elsewhere for similar messages.
(obj_elf_section_name): New function, split out from ..
(obj_elf_section): .. here. Correctly mask off SHF_MERGE if
entsize not specified.
relocation triple.
(prev_insn_fixp): Likewise.
(append_insn): Changed prototype to accept a relocation pointer.
(imm_reloc): Make it an array.
(offset_reloc): Likewise.
(md_assemble): Handle triple relocations.
(append_insn): Likewise. Add handling for some NewABI relocations.
(mips_no_prev_insn): Handle triple relocations.
(macro_build): Likewise. Add handling for some NewABI relocations.
Move handling for the 'u' case to append_insn().
(mips16_macro_build): Handle triple relocations.
(macro_build_lui): Likewise. Don't handle _gp_disp as special symbol
for NewABI.
(mips_ip): Handle triple relocations.
(mips16_ip): Likewise.
(mips_force_relocation): Force handling of triple relocations
without symbols for NewABI.
(md_apply_fix): Add handling for some NewABI relocations.
