(pa_subspace): For ".nsubspa", always create a new subspace
with the given attributes, even if one already exists with the
same name.
So we can put every function into its own $CODE$ subspace.
* frags.c (frags): Variable deleted.
(frag_alloc): New function.
(frag_grow, frag_more, frag_variant, frag_now_fix, frag_append_1_char): Refer
to frchain_now->frch_obstack instead of frags variable.
(frag_new): Ditto. Verify that frch_last and frag_now match on entry and exit,
and that old frag_now has non-zero type. Replace "know" uses with "assert".
Use frag_alloc instead of mucking with obstack alignment.
* frags.h (frags): Declaration deleted.
* subsegs.h (struct frchain): Add new field frch_frag_now.
* subsegs.c (frchains, dummy_frag, absolute_frchain): New static variables.
(subsegs_begin): Initialize frchains obstack. Under gcc, don't give it any
stricter alignment than frchainS structures need. Do not initialize frags
obstack. Set frag_now to point to dummy_obstack. Initialize absolute_frchain.
(subseg_set_rest): Save and restore frag_now in frch_frag_now field of
frchainS. Don't create new frags on section switch, and use frag_alloc when
creating a new frag chain. For absolute section, set frchain_now to
absolute_frchain. Verify that frch_last and frag_now match on entry and exit.
Initialize per-chain obstack, and under gcc, set required alignment to that
needed by fragS structure.
* write.c (chain_frchains_together_1): Verify fr_type is nonzero.
In one test case of Mike's (i386-linux, over 300K lines of .s code with lots
of stabs records), run time and memory use are reduced by about 1/3.
Might introduce some problems in cases that use the frag obstacks in unusual
ways. Test suite does pass for i386-linux and sparc-solaris targets though.
(ppc_biei): Set segment to now_seg and value to coff_n_line_nos.
(ppc_frob_symbol): Handle C_BINCL and C_EINCL symbols by setting
the fix_line field.
* config/obj-coff.c (coff_n_line_nos): Rename from n_line_nos, and
make non-static. Change all users.
* config/obj-coff.h (coff_n_line_nos): Declare.
* configure.in (AC_ARG_WITH(bfd-assembler)): Fix help message.
* config/obj-elf.c (obj_elf_common): Convert specified byte alignment to power
of two. Set size of local bss symbol.
* config/tc-m68k.c (tc_gen_reloc): Fix typo in variable name.
skip characters after the pseudo-op.
(s_else): Likewise.
* read.c (get_line_sb): Don't look past buffer_limit.
(s_include): In MRI mode, skip characters after the file name.
* config/tc-i960.c (md_pseudo_table): Add endian.
(get_args): Don't discard a space between alphanumeric characters.
(get_cdisp): Change text_section to now_seg.
(s_endian): New static function.
* config/tc-i960.h (MRI_MODE_NEEDS_PSEUDO_DOT): Define.
* expr.h (operatorT): Add O_logical_not, O_logical_and, and
O_logical_or.
* expr.c (operand): Treat '!' as logical not operator. If
TC_I960, in MRI mode permit `sizeof secname' and `startof
secname'.
(op_rank): Bump values by 2 to make room for && and ||. Add
entries for !, &&, and ||.
(expr_begin): Only do MRI changes if TC_M68K.
(operator): Recognize || and &&.
(expr): Handle new operatorT values.
* symbols.c (resolve_symbol_value): Handle new operatorT values.
(print_expr_1): Likewise.
* read.c (potable): Add debug, err, irep, irepc, print, purgem,
and rep.
(read_a_source_file): Handle MRI_MODE_NEEDS_PSEUDO_DOT.
(mri_comment_field): Only handle weird comments if TC_M68K.
(s_err): New function.
(s_org): Only punt in MRI mode if TC_M68K.
(s_mri_sect): Write TC_I960 version.
(s_print, s_purgem): New functions.
* read.h (s_err, s_print, s_purgem): Declare.
* cond.c (s_ifeqs): Implement.
(ignore_input): Handle MRI_MODE_NEEDS_PSEUDO_DOT.
* macro.c (macro_strip_at): New static variable.
(macro_init): Add strip_at parameter.
(do_formals): If macro_strip_at, change NARG to $NARG.
(define_macro): Skip a comma after the macro name.
(get_apost_token): Skip character if macro_strip_at, even if
macro_mri.
(macro_expand_body): If macro_strip_at, don't recognize parameters
in strings unless they are preceded by an '@'. If macro_strip_at,
pass '@' as strip character to sub_actual. If macro_strip_at,
strip '@' characters.
(macro_expand): If macro_strip_at, change NARG to $NARG.
(delete_macro): New function.
(expand_irp): Skip leading and trailing '"' characters if irpc.
* macro.h (macro_init): Mention new strip_at parameter.
(delete_macro): Declare.
* as.c (main): If TC_I960, pass flag_mri to macro_init as
strip_at; otherwise, pass 0.
* gasp.c (process_pseudo_op): Pass 0 to macro_init as strip_at.
(main): Likewise.
* doc/as.texinfo: Document i960 MRI mode.
* as.c (show_usage): Mention --defsym.
VERSION, move gen of "conf" here from makefile.
* mpw-make.sed: New file, sed commands to translate Unix makefile
into MPW syntax.
* mpw-make.in: Remove.
* mac-as.r: New file, Mac resource file.
* as.h (inline): Don't decide about defining if __MWERKS__,
remove redundant conditional and definition.
* stabs.c (s_stab_generic): Fix syntax for OBJ_PROCESS_STAB.
Change OBJ_COFF checks to check OBJ_XCOFF instead.
(TARGET_FORMAT): Fully parenthesize.
(LEX_QM): Define if TE_PE.
* config/tc-ppc.c: Replace OBJ_COFF by OBJ_XCOFF throughout.
Remove checks of TE_PE within #ifdef OBJ_XCOFF sections.
(init_regtable): Make i unsigned.
(ppc_set_current_section): Rename from setCurrentSection. Change
all callers.
(ppc_arch): Return after as_fatal to avoid gcc warning.
(md_assemble): Only declare reloc if OBJ_ELF. Add default to
switch on fixups[i].reloc to avoid gcc warning.
(IMAGE_SGN_LNK_OTHER): Fix nested comment.
(ppc_pe_function): Don't call ppc_canonicalize_symbol_name.
(ppc_frob_symbol): Remove TE_PE section checks.
(md_estimate_size_before_relax): Return after abort to avoid gcc
warning.
(md_apply_fix3): Add BFD_RELOC_16_GOT_PCREL to switch.
* read.c (LEX_QM): Define as 0 if not defined.
(lex_type): Use LEX_QM for '?'.
* expr.c (expr): Account for new operatorT values in know
expression.
* write.c (fixup_segment): Clear fixp->fx_subsy if the relocation
is fully resolved.
and rightstop to not be const.
(parse_mri_control_expression): Likewise.
(build_mri_control_operand): Likewise. Use m68k_ip_op to examine
the operand, not m68k_reg_parse.
(s_mri_if): In MRI mode, stop at the first '*'.
(s_mri_while): Likewise.
(s_mri_else): In MRI mode, ignore trailing characters.
(s_mri_endi, s_mri_break, s_mri_next, s_mri_for): Likewise.
(s_mri_endf, s_mri_repeat, s_mri_until, s_mri_endw): Likewise.
* config/m68k-parse.y: Revert yesterday's change.
* config/m68k-parse.h: Revert yesterday's change.
and rightstart to not be const.
(parse_mri_control_expression): Likewise.
(build_mri_control_operand): Likewise. If the left side of the
comparison is a register, and the right side is not, swap the two
sides.
* config/m68k-parse.y (m68k_reg_parse): Make globally visible.
* config/m68k-parse.h (m68k_reg_parse): Declare.
sym-sym case.
* config/obj-coff.c (fixup_segment): Likewise. Permit negative
symbols if TC_M68K.
* config/tc-m68k.c (tc_coff_fix2rtype): If fx_tcbit is set, return
R_RELLONG_NEG.
(tc_gen_reloc): If fx_tcbit is set, abort.
(md_apply_fix_2): For a negative reloc, move fx_subsy to fx_addsy,
and set fx_tcbit.
Permits generating negative relocs for m68k COFF.
(CHECKFLAGS): Remove.
(site.exp): New target.
(check): Rewrite to invoke runtest directly, rather than recurring
down into testsuite.
(clean-here): Remove testsuite directory.
(clean, distclean): Don't recur into testsuite.
* configure.in: Don't call AC_CONFIG_SUBDIRS(testsuite).
* configure: Rebuild.
relaxing, in case md_convert_frag, called by cvt_frag_to_fill,
wants to call fix_new.
* config/tc-m68k.c (m68k_ip): Permit PC relative code if the
segment of the symbol is the current segment, not just in
text_section.
(md_convert_frag_1): Don't call subseg_change.
(md_estimate_size_before_relax): Likewise.
line before preserving a single space. Remove state == 0 test
which will never succeed.
* macro.c (macro_expand_body): Delete local variables from the
formal hash table.
(macro_expand): In MRI mode, stop when whitespace is seen in the
argument list.
