Without the code portion of the patch, we get these failures:
FAIL: gdb.base/break-unload-file.exp: always-inserted on: break: continue
FAIL: gdb.base/break-unload-file.exp: always-inserted on: hbreak: continue
FAIL: gdb.base/sym-file.exp: stale bkpts: continue to breakpoint: end here
They all looks like random SIGTRAPs:
continue
Continuing.
Program received signal SIGTRAP, Trace/breakpoint trap.
0x0000000000400541 in foo () at ../../../src/gdb/testsuite/gdb.base/break-unload-file.c:21
21 }
(gdb) FAIL: gdb.base/break-unload-file.exp: always-inserted on: break: continue
(This is a regression caused by the remove-symbol-file command
series.)
break-unload-file.exp is about having breakpoints inserted, and then
doing "file". I caught this while writing a test that does "file
PROGRAM", while PROGRAM was already loaded, which internally does
"file" first, because I wanted to force a breakpoint_re_set, but the
test is more explicit in case GDB ever optimizes out that re-set.
The problem is that unloading the file with "file" ends up in
disable_breakpoints_in_freed_objfile, which marks all breakpoint
locations of the objfile as both shlib_disabled, _and_ clears the
inserted flag, without actually removing the breakpoints from the
inferior. Now, usually, in all-stop, breakpoints will already be
removed from the inferior before the user can issue the "file"
command, but, with non-stop, or breakpoints always-inserted on mode,
breakpoints stay inserted even while the user has the prompt. In the
latter case, then, if we let the program continue, and it executes the
address where we had previously set the breakpoint, it'll actually
execute the breakpoint instruction that we left behind...
Now, one issue is that the intent of
disable_breakpoints_in_freed_objfile is really to handle the unloading
of OBJF_USERLOADED objfiles. These are objfiles that were added with
add-symbol-file and that are removed with remove-symbol-file.
"add-symbol-file"'s docs in the manual clearly say these commands are
used to let GDB know about dynamically loaded code:
You would use this command when @var{filename} has been dynamically
loaded (by some other means) into the program that is running.
Similarly, the online help says:
(gdb) help add-symbol-file
Load symbols from FILE, assuming FILE has been dynamically loaded.
So it makes sense to, like when shared libraries are unloaded through
the generic solib machinery, mark the breakpoint locations as
shlib_disabled. But, the "file" command is not about dynamically
loaded code, it's about the main program. So the patch makes
disable_breakpoints_in_freed_objfile skip all objfiles but
OBJF_USERLOADED ones, thus skipping the main objfile.
Then, the reason that disable_breakpoints_in_freed_objfile was
clearing the inserted flag isn't clear, but likely to avoid breakpoint
removal errors, assuming remove-symbol-file was called after the
dynamic object was already unmapped from the inferior. In that case,
it'd okay to simply clear the inserted flag, but not so if the user
for example does remove-symbol-file to remove the library because he
made a mistake in the library's address, and wants to re-do
add-symbol-file with the correct address.
To address all that, I propose an alternative implementation, that
handles both cases. The patch includes changes to sym-file.exp to
cover them.
This implementation leaves the inserted flag alone, and handles
breakpoint insertion/removal failure gracefully when the locations are
in OBJF_USERLOADED objfiles, just like we handle insertion/removal
failure gracefully for locations in shared libraries.
To try to make sure we aren't patching back stale shadow memory
contents into the inferior, in case the program mapped a different
library at the same address where we had the breakpoint, without the
user having had a chance of remove-symbol-file'ing before, this adds a
new memory_validate_breakpoint function that checks if the breakpoint
instruction is still in memory. ppc_linux_memory_remove_breakpoint
does this unconditionally for all memory breakpoints, and questions
whether memory_remove_breakpoint should be changed to do this for all
breakpoints. Possibly yes, though I'm not certain, hence this
baby-steps patch.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2014-04-23 Pedro Alves <palves@redhat.com>
* breakpoint.c (insert_bp_location): Tolerate errors if the
breakpoint is set in a user-loaded objfile.
(remove_breakpoint_1): Likewise. Also tolerate errors if the
location is marked shlib_disabled. If the breakpoint is set in a
user-loaded objfile is a GDB-side memory breakpoint, validate it
before uninsertion. (disable_breakpoints_in_freed_objfile): Skip
non-OBJF_USERLOADED objfiles. Don't clear the location's inserted
flag.
* mem-break.c (memory_validate_breakpoint): New function.
* objfiles.c (userloaded_objfile_contains_address_p): New
function.
* objfiles.h (userloaded_objfile_contains_address_p): Declare.
* target.h (memory_validate_breakpoint): New declaration.
gdb/testsuite/
2014-04-23 Pedro Alves <palves@redhat.com>
* gdb.base/break-unload-file.c: New file.
* gdb.base/break-unload-file.exp: New file.
* gdb.base/sym-file-lib.c (baz): New function.
* gdb.base/sym-file-loader.c (struct segment) <mapped_size>: New
field.
(load): Store the segment's mapped size.
(unload): New function.
(unload_shlib): New function.
* gdb.base/sym-file-loader.h (unload_shlib): New declaration.
* gdb.base/sym-file-main.c (main): Unload, and reload the library,
set a breakpoint at baz, and call it.
* gdb.base/sym-file.exp: New tests for stale breakpoint
instructions.
This changes the probes to be independent of the program space.
After this, when a probe's address is needed, it is determined by
applying offsets at the point of use.
This introduces a bound_probe object, similar to bound minimal
symbols. Objects of this type are used when it's necessary to pass a
probe and its corresponding objfile.
This removes the backlink from probe to objfile, which was primarily
used to fetch the architecture to use.
This adds a get_probe_address function which calls a probe method to
compute the probe's relocated address. Similarly, it adds an objfile
parameter to the semaphore methods so they can do the relocation
properly as well.
2014-03-03 Tom Tromey <tromey@redhat.com>
* break-catch-throw.c (fetch_probe_arguments): Use bound probes.
* breakpoint.c (create_longjmp_master_breakpoint): Use
get_probe_address.
(add_location_to_breakpoint, bkpt_probe_insert_location)
(bkpt_probe_remove_location): Update.
* breakpoint.h (struct bp_location) <probe>: Now a bound_probe.
* elfread.c (elf_symfile_relocate_probe): Remove.
(elf_probe_fns): Update.
(insert_exception_resume_breakpoint): Change type of "probe"
parameter to bound_probe.
(check_exception_resume): Update.
* objfiles.c (objfile_relocate1): Don't relocate probes.
* probe.c (bound_probe_s): New typedef.
(parse_probes): Use get_probe_address. Set sal's objfile.
(find_probe_by_pc): Return a bound_probe.
(collect_probes): Return a VEC(bound_probe_s).
(compare_probes): Update.
(gen_ui_out_table_header_info): Change type of "probes"
parameter. Update.
(info_probes_for_ops): Update.
(get_probe_address): New function.
(probe_safe_evaluate_at_pc): Update.
* probe.h (struct probe_ops) <get_probe_address>: New field.
<set_semaphore, clear_semaphore>: Add objfile parameter.
(struct probe) <objfile>: Remove field.
<arch>: New field.
<address>: Update comment.
(struct bound_probe): New.
(find_probe_by_pc): Return a bound_probe.
(get_probe_address): Declare.
* solib-svr4.c (struct probe_and_action) <address>: New field.
(hash_probe_and_action, equal_probe_and_action): Update.
(register_solib_event_probe): Add address parameter.
(solib_event_probe_at): Update.
(svr4_create_probe_breakpoints): Add objfile parameter. Use
get_probe_address.
* stap-probe.c (struct stap_probe) <sem_addr>: Update comment.
(stap_get_probe_address): New function.
(stap_can_evaluate_probe_arguments, compute_probe_arg)
(compile_probe_arg): Update.
(stap_set_semaphore, stap_clear_semaphore): Compute semaphore's
address.
(handle_stap_probe): Don't relocate the probe.
(stap_relocate): Remove.
(stap_gen_info_probes_table_values): Update.
(stap_probe_ops): Remove stap_relocate.
* symfile-debug.c (debug_sym_relocate_probe): Remove.
(debug_sym_probe_fns): Update.
* symfile.h (struct sym_probe_fns) <sym_relocate_probe>: Remove.
* symtab.c (init_sal): Use memset.
* symtab.h (struct symtab_and_line) <objfile>: New field.
* tracepoint.c (start_tracing, stop_tracing): Update.
Now that minimal symbols are independent of the program space, we can
move them to the per-BFD object. This lets us save memory in the
multi-inferior case; and, once the symbol readers are updated, time.
The other prerequisite for this move is that all the objects referred
to by the minimal symbols have a lifetime at least as long as the
per-BFD object. I think this is satisfied partially by this patch
(moving the copied names there) and partially by earlier patches
moving the demangled name hash.
This patch contains a bit of logic to avoid creating new minimal
symbols if they have already been read for a given BFD. This allows
us to avoid trying to update all the symbol readers for this
condition. At first glance this may seem like a hack, but some symbol
readers mix psym and minsym reading, and would require logic just like
this regardless -- and it is simpler and less error-prone to just do
the work in a central spot.
2014-02-26 Tom Tromey <tromey@redhat.com>
* minsyms.c (lookup_minimal_symbol, iterate_over_minimal_symbols)
(lookup_minimal_symbol_text, lookup_minimal_symbol_by_pc_name)
(lookup_minimal_symbol_solib_trampoline)
(lookup_minimal_symbol_by_pc_section_1)
(lookup_minimal_symbol_and_objfile): Update.
(prim_record_minimal_symbol_full): Use the per-BFD obstack.
Don't allocate a minimal symbol if minsyms have already been read.
(build_minimal_symbol_hash_tables): Update.
(install_minimal_symbols): Do nothing if minsyms already read.
Use the per-BFD obstack.
(terminate_minimal_symbol_table): Use the per-BFD obstack.
* objfiles.c (allocate_objfile): Call
terminate_minimal_symbol_table later.
(have_minimal_symbols): Update.
* objfiles.h (struct objfile_per_bfd_storage) <msymbols,
minimal_symbol_count, msymbol_hash, msymbol_demangled_hash>:
Move from struct objfile.
<minsyms_read>: New field.
(struct objfile) <msymbols, minimal_symbol_count,
msymbol_hash, msymbol_demangled_hash>: Move.
(ALL_OBJFILE_MSYMBOLS): Update.
* symfile.c (read_symbols): Set minsyms_read.
(reread_symbols): Update.
* symmisc.c (dump_objfile, dump_msymbols): Update.
This removes the runtime offsets from minsyms. Instead, these offsets
will now be applied whenever the minsym's address is computed.
This patch redefines MSYMBOL_VALUE_ADDRESS to actually use the offsets
from the given objfile. Then, it updates all the symbol readers,
changing them so that they do not add in the section offset when
creating the symbol.
This change also lets us remove relocation of minsyms from
objfile_relocate1 and also msymbols_sort.
2014-02-26 Tom Tromey <tromey@redhat.com>
* minsyms.c (msymbols_sort): Remove.
* minsyms.h (msymbols_sort): Remove.
* objfiles.c (objfile_relocate1): Don't relocate minsyms.
* symtab.h (MSYMBOL_VALUE_ADDRESS): Use objfile offsets.
* elfread.c (elf_symtab_read): Don't add section offsets.
* xcoffread.c (record_minimal_symbol): Don't add section offset
to minimal symbol address.
* somread.c (text_offset, data_offset): Remove.
(som_symtab_read): Don't add section offsets to minimal symbol
addresses.
* coff-pe-read.c (add_pe_forwarded_sym, read_pe_exported_syms):
Don't add section offsets to minimal symbols.
* coffread.c (coff_symtab_read): Don't add section offsets
to minimal symbol addresses.
* machoread.c (macho_symtab_add_minsym): Don't add section offset
to minimal symbol addresses.
* mipsread.c (read_alphacoff_dynamic_symtab): Don't add
section offset to minimal symbol addresses.
* mdebugread.c (parse_partial_symbols): Don't add section
offset to minimal symbol addresses.
* dbxread.c (read_dbx_dynamic_symtab): Don't add section
offset to minimal symbol addresses.
This changes MSYMBOL_VALUE_ADDRESS to be an rvalue. In a later patch
we change this macro to compute its value; this patch introduces a
setter to make the break a bit cleaner.
2014-02-26 Tom Tromey <tromey@redhat.com>
* minsyms.c (prim_record_minimal_symbol_full): Use
SET_MSYMBOL_VALUE_ADDRESS.
* objfiles.c (objfile_relocate1): Use SET_MSYMBOL_VALUE_ADDRESS.
* sh64-tdep.c (sh64_elf_make_msymbol_special): Use
SET_MSYMBOL_VALUE_ADDRESS.
* symtab.h (MSYMBOL_VALUE_ADDRESS): Expand to an rvalue.
(SET_MSYMBOL_VALUE_ADDRESS): New macro.
This adds the "main"-related data into the per-BFD. This is needed
because once symbol sharing across objfiles is complete, computing the
main name as a side effect of symbol reading will no longer work --
the symbols simply won't be re-read.
After this change, set_main_name is only used by the main_name
machinery itself, so this patch makes it static.
2014-01-15 Tom Tromey <tromey@redhat.com>
* dbxread.c (process_one_symbol): Use set_objfile_main_name.
* dwarf2read.c (read_partial_die): Use set_objfile_main_name.
* objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
(set_objfile_main_name): New function.
* objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
language_of_main>: New fields.
(set_objfile_main_name): Declare.
* symtab.c (find_main_name): Loop over objfiles to find the main
name and language.
(set_main_name): Now static.
(get_main_info): Add comment.
* symtab.h (set_main_name): Don't declare.
This moves the entry point information into the per-BFD object and
arranges not to recompute it when it has already been computed.
2014-01-15 Tom Tromey <tromey@redhat.com>
* symfile.c (init_entry_point_info): Use new "initialized" field.
Update.
* objfiles.h (struct entry_point) <initialized>: New field.
(struct objfile_per_bfd_storage) <ei>: New field, moved from...
(struct objfile) <ei>: ...here. Remove.
* objfiles.c (entry_point_address_query): Update.
This changes the entry point to be unrelocated in the objfile, and
instead applies the relocation when it is used.
2014-01-15 Tom Tromey <tromey@redhat.com>
* objfiles.c (entry_point_address_query): Relocate entry point
address.
(objfile_relocate1): Do not relocate entry point address.
* objfiles.h (struct entry_info) <entry_point>: Update comment.
<the_bfd_section_index>: New field.
* symfile.c (init_entry_point_info): Find the entry point's
section.
The introductory comment to free_objfile is obsolete.
This patch fixes it by removing all the obsolete bits.
2013-12-06 Tom Tromey <tromey@redhat.com>
* objfiles.c (free_objfile): Update comment.
I happened to notice that nothing uses objfile_to_front.
This patch removes it.
2013-12-06 Tom Tromey <tromey@redhat.com>
* objfiles.h (objfile_to_front): Remove.
* objfiles.c (objfile_to_front): Remove.
gdb/
2013-12-02 Doug Evans <dje@google.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* objfiles.c (allocate_objfile): Save original_name as an absolute
path.
* objfiles.h (struct objfile): Expand comment on original_name.
* source.c (openp): Call gdb_abspath.
* utils.c (gdb_abspath): New function.
* utils.h (gdb_abspath): Declare.
gdb/testsuite/
2013-12-02 Doug Evans <dje@google.com>
* gdb.dwarf/dwp-symlink.c: Fake out gdb to not load debug info
at start.
* gdb.dwarf/dwp-symlink.exp: Test trying to load dwp when the binary
has been specified with a relative path and we have chdir'd before
accessing the debug info.
This patch is purely mechanical. It removes gdb_stat.h and changes
the code to use sys/stat.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_stat.h: Remove.
* ada-lang.c: Use sys/stat.h, not gdb_stat.h.
* common/filestuff.c: Use sys/stat.h, not gdb_stat.h.
* common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h.
* corefile.c: Use sys/stat.h, not gdb_stat.h.
* ctf.c: Use sys/stat.h, not gdb_stat.h.
* darwin-nat.c: Use sys/stat.h, not gdb_stat.h.
* dbxread.c: Use sys/stat.h, not gdb_stat.h.
* dwarf2read.c: Use sys/stat.h, not gdb_stat.h.
* exec.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h.
* inf-child.c: Use sys/stat.h, not gdb_stat.h.
* jit.c: Use sys/stat.h, not gdb_stat.h.
* linux-nat.c: Use sys/stat.h, not gdb_stat.h.
* m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h.
* main.c: Use sys/stat.h, not gdb_stat.h.
* mdebugread.c: Use sys/stat.h, not gdb_stat.h.
* mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h.
* nto-tdep.c: Use sys/stat.h, not gdb_stat.h.
* objfiles.c: Use sys/stat.h, not gdb_stat.h.
* procfs.c: Use sys/stat.h, not gdb_stat.h.
* remote-fileio.c: Use sys/stat.h, not gdb_stat.h.
* remote-mips.c: Use sys/stat.h, not gdb_stat.h.
* remote.c: Use sys/stat.h, not gdb_stat.h.
* rs6000-nat.c: Use sys/stat.h, not gdb_stat.h.
* sol-thread.c: Use sys/stat.h, not gdb_stat.h.
* solib-spu.c: Use sys/stat.h, not gdb_stat.h.
* source.c: Use sys/stat.h, not gdb_stat.h.
* symfile.c: Use sys/stat.h, not gdb_stat.h.
* symmisc.c: Use sys/stat.h, not gdb_stat.h.
* symtab.c: Use sys/stat.h, not gdb_stat.h.
* top.c: Use sys/stat.h, not gdb_stat.h.
* xcoffread.c: Use sys/stat.h, not gdb_stat.h.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
New command for removing symbol files added via
the add-symbol-file command.
2013-10-29 Nicolas Blanc <nicolas.blanc@intel.com>
* breakpoint.c (disable_breakpoints_in_freed_objfile): New function.
* objfiles.c (free_objfile): Notify free_objfile.
(is_addr_in_objfile): New function.
* objfiles.h (is_addr_in_objfile): New declaration.
* printcmd.c (clear_dangling_display_expressions): Act upon free_objfile
events instead of solib_unloaded events.
(_initialize_printcmd): Register observer for free_objfile instead
of solib_unloaded notifications.
* solib.c (remove_user_added_objfile): New function.
* symfile.c (remove_symbol_file_command): New command.
(_initialize_symfile): Add remove-symbol-file.
gdb/doc
* observer.texi: New free_objfile event.
Signed-off-by: Nicolas Blanc <nicolas.blanc@intel.com>
In registry.c:registry_clear_data, the registered data is iterated and
invoke each 'free' function with the data passed:
for (registration = data_registry->registrations, i = 0;
i < fields->num_data;
registration = registration->next, i++)
if (fields->data[i] != NULL && registration->data->free != NULL)
adaptor (registration->data->free, container, fields->data[i]);
we can see that data is passed to function 'free' and data is not NULL.
In each usage, we don't have to get the data again through key and
do NULL pointer checking. This patch is to simplify them.
gdb:
2013-10-29 Yao Qi <yao@codesourcery.com>
* auto-load.c (auto_load_pspace_data_cleanup): Get data from
parameter 'arg' instead of from program_space_data.
* objfiles.c (objfiles_pspace_data_cleanup): Likewise.
* solib-darwin.c (darwin_pspace_data_cleanup): Likewise.
* solib-dsbt.c (dsbt_pspace_data_cleanup): Likewise.
* solib-svr4.c (svr4_pspace_data_cleanup): Likewise.
* inflow.c (inflow_inferior_data_cleanup): Get data from
parameter 'arg' instead of inferior_data.
* registry.h: Add comments.
gdb/
2013-10-09 Jan Kratochvil <jan.kratochvil@redhat.com>
New flag OBJF_NOT_FILENAME.
* auto-load.c (auto_load_objfile_script): Check also OBJF_NOT_FILENAME.
* jit.c (jit_object_close_impl): Use OBJF_NOT_FILENAME for
allocate_objfile.
(jit_bfd_try_read_symtab): Use OBJF_NOT_FILENAME for
symbol_file_add_from_bfd.
* jv-lang.c (get_dynamics_objfile): Use OBJF_NOT_FILENAME for
allocate_objfile.
* objfiles.c (allocate_objfile): Assert OBJF_NOT_FILENAME if NAME is
NULL.
* objfiles.h (OBJF_NOT_FILENAME): New.
This moves the demangled_names_hash from the objfile into the per-BFD
object. This is part of the objfile splitting project.
The demangled names hash is independent of the program space. And, it
is needed by the symbol tables. Both of these things indicate that it
must be pushed into the per-BFD object, which this patch does.
Built and regtested on x86-64 Fedora 18.
* objfiles.c (free_objfile_per_bfd_storage): Delete the
demangled_names_hash.
(free_objfile): Don't delete the demangled_names_hash.
* objfiles.h (struct objfile_per_bfd_storage)
<demangled_names_hash>: New field.
(struct objfile) <demangled_names_hash>: Move to
objfile_per_bfd_storage.
* symfile.c (reread_symbols): Don't delete the
demangled_names_hash.
* symtab.c (create_demangled_names_hash): Update.
(symbol_set_names): Update.
Right now we always share per-BFD data across objfiles, if there is a
BFD. This works fine. However, we're going to start sharing more
data, and sometimes this data will come directly from sections of the
BFD. If such a section has SEC_RELOC set, then the data coming from
that section will not be truly sharable -- the section will be
program-space-dependent, and re-read by gdb for each objfile.
This patch disallows per-BFD sharing in this case. This is a bit
"heavy" in that we could in theory examine each bit of shared data for
suitability. However, that is more complicated, and SEC_RELOC is rare
enough that I think we needn't bother.
Note that the "no sharing" case is equivalent to "gdb works as it
historically did". That is, the sharing is a new(-ish) optimization.
Built and regtested on x86-64 Fedora 18.
* gdb_bfd.c (struct gdb_bfd_data) <relocation_computed,
needs_relocations>: New fields.
(gdb_bfd_requires_relocations): New function.
* gdb_bfd.h (gdb_bfd_requires_relocations): Declare.
* objfiles.c (get_objfile_bfd_data): Disallow sharing if
the BFD needs relocations applied.
gdb/
2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Pass down original filename for objfile.
* coffread.c (coff_symfile_read): Update symbol_file_add_separate call.
* elfread.c (elf_symfile_read): Likewise.
* jit.c (jit_object_close_impl): Update allocate_objfile call, no
longer set ORIGINAL_NAME.
(jit_bfd_try_read_symtab): Update symbol_file_add_from_bfd call.
* jv-lang.c (get_dynamics_objfile): Update allocate_objfile call.
* machoread.c (macho_add_oso_symfile): Add parameter name. Update
symbol_file_add_from_bfd call.
(macho_symfile_read_all_oso): Update two macho_add_oso_symfile calls.
(macho_check_dsym): Add parameter filenamep. Change function comment.
Set *filenamep.
(macho_symfile_read): New variable dsym_filename. Update
macho_check_dsym call. Use it for symbol_file_add_separate.
* objfiles.c (allocate_objfile): Add parameter name. New comment for
it. Use it for objfile->original_name.
(objfile_name): Return OBFD's filename, if available.
* objfiles.h (allocate_objfile): Add new parameter name.
* solib.c (solib_read_symbols): Update symbol_file_add_from_bfd call.
* symfile-mem.c (symbol_file_add_from_memory): Update
symbol_file_add_from_bfd call.
* symfile.c (read_symbols): Update symbol_file_add_separate call, new
comment for it.
(symbol_file_add_with_addrs): New parameter name, add function comment
for it. Remove variable name. Update allocate_objfile call.
(symbol_file_add_separate): New parameter name, add function comment
for it. Update symbol_file_add_with_addrs call.
(symbol_file_add_from_bfd): New parameter name. Update
symbol_file_add_with_addrs call.
(symbol_file_add): Update symbol_file_add_from_bfd call.
(reread_symbols): New variable original_name. Save
objfile->original_name by it.
* symfile.h (symbol_file_add_from_bfd, symbol_file_add_separate): Add
second parameter.
This moves the "gdbarch" field from the objfile into the BFD.
This field's value is derived from the BFD and is immutable over the
lifetime of the BFD. This makes it a reasonable candidate for pushing
into the per-BFD object.
This is part of the long-term objfile splitting project. In the long
run I think this patch will make it simpler to moves types from the
objfile to the per-BFD object; but the patch makes sense as a minor
cleanup by itself.
Built and regtested on x86-64 Fedora 18.
* cp-namespace.c (cp_lookup_symbol_imports_or_template): Use
get_objfile_arch.
* elfread.c (elf_rel_plt_read, elf_gnu_ifunc_record_cache)
(elf_gnu_ifunc_resolve_by_got): Use get_objfile_arch.
* jit.c (jit_object_close_impl): Update.
* jv-lang.c (get_dynamics_objfile): Update.
* linespec.c (add_minsym): Use get_dynamics_objfile.
* objfiles.c (get_objfile_bfd_data): Initialize 'gdbarch' field.
(allocate_objfile): Don't initialize 'gdbarch' field.
(get_objfile_arch): Update.
* objfiles.h (struct objfile_per_bfd_storage) <gdbarch>: New field,
moved from...
(struct objfile) <gdbarch>: ... here. Remove.
* stap-probe.c (stap_can_evaluate_probe_arguments): Use
get_objfile_arch.
* symfile.c (init_entry_point_info): Use get_objfile_arch.
* objfiles.h (inhibit_section_map_updates): New function
declaration.
(resume_section_map_updates): Likewise.
(resume_section_map_updates_cleanup): Likewise.
* objfiles.c (objfile_pspace_info): Removed field
"objfiles_changed_p". New fields "new_objfiles_available",
"section_map_dirty" and "inhibit_updates".
(allocate_objfile): Set new_objfiles_available.
(free_objfile): Set section_map_dirty.
(objfile_relocate1): Likewise.
(in_plt_section): Likewise.
(find_pc_section): Update the conditions under which the
section map will be updated.
(inhibit_section_map_updates): New function.
(resume_section_map_updates): Likewise.
(resume_section_map_updates_cleanup): Likewise.
of bfd_count_sections.
* solib-target.c (solib_target_relocate_section_addresses): Ditto.
* symfile.c (default_symfile_offsets): Ditto.
(syms_from_objfile_1): Ditto. Make dummy addrs list an array of
one entry, not bfd_count_sections entries.
The target implements the new record sub-commands
"record instruction-history" and
"record function-call-history".
The target does not support reverse execution or navigation in the
recorded execution log.
gdb/
* Makefile.in (SFILES): Add record-btrace.c
(COMMON_OBS): Add record-btrace.o
* record-btrace.c: New.
* objfiles.c: Include btrace.h.
(free_objfile): call btrace_free_objfile.
Code cleanup.
* breakpoint.c (print_breakpoint_location): Replace bp_location field
source_file references by symtab field references. Remove variables
sal and fullname.
(momentary_breakpoint_from_master, add_location_to_breakpoint):
(clear_command, say_where): Replace bp_location field source_file
references by symtab field references.
(bp_location_dtor): Remove the source_file reference.
(update_static_tracepoint): Replace bp_location field source_file
references by symtab field references.
(breakpoint_free_objfile): New function.
* breakpoint.h (struct bp_location): Extend the comment for line_number.
Replace the field source_file by field symtab, extend its comment.
(breakpoint_free_objfile): New declaration.
* objfiles.c (free_objfile): Call breakpoint_free_objfile.
* tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
field source_file references by symtab field references.
* elfread.c (elf_symfile_read): Limit separate debug info additions to
files with no separate debug info.
* objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
* symfile.c (read_symbols): Call find_separate_debug_file_in_section
only for files with no separate debug info.
gdb/testsuite/
* gdb.base/gnu-debugdata.exp): Create ${binfile}.debug,
${binfile}.mini_debuginfo-debuglink, add -k to xz, use now
${binfile}.mini_debuginfo-debuglink and
${binfile}.mini_debuginfo-debuglink.xz.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
and 'abfd'.
* elfread.c (elf_symfile_read): Make a cleanup for 'debugfile'
and 'abfd'.
* jit.c (jit_bfd_try_read_symtab): Make a cleanup for 'nbfd'.
* machoread.c (macho_add_oso_symfile): Make a cleanup for
'abfd'.
(macho_symfile_read): Make a cleanup for 'dsym_bfd'.
* objfiles.c (allocate_objfile): Acquire a new reference.
* rs6000-nat.c (add_vmap): Don't acquire a BFD reference.
* solib.c (solib_read_symbols): Don't acquire a BFD reference.
* spu-linux-nat.c (spu_symbol_file_add_from_memory): Make
a cleanup for 'nbfd'.
* symfile-mem.c (symbol_file_add_from_memory): Make a cleanup
for 'nbfd'.
* symfile.c (symbol_file_add_with_addrs_or_offsets): Don't
make a cleanup for 'abfd'.
(symbol_file_add): Make a BFD cleanup.
gdb_bfd_unref.
(free_dwo_file): Use gdb_bfd_unref.
* cli/cli-dump.c: Include gdb_bfd.h.
(bfd_openw_with_cleanup): Use gdb_bfd_ref.
(bfd_openr_with_cleanup): Likewise.
* windows-nat.c (windows_make_so): Use gdb_bfd_ref,
gdb_bfd_unref.
* utils.c: Include gdb_bfd.h.
(do_bfd_close_cleanup): Use gdb_bfd_unref.
* symfile.c: Include gdb_bfd.h.
(separate_debug_file_exists): Use gdb_bfd_unref.
(bfd_open_maybe_remote): Use gdb_bfd_ref.
(symfile_bfd_open): Use gdb_bfd_ref, gdb_bfd_unref.
(generic_load): Use gdb_bfd_ref.
(reread_symbols): Use gdb_bfd_unref.
* symfile-mem.c: Include gdb_bfd.h.
(symbol_file_add_from_memory): Use make_cleanup_bfd_close.
* spu-linux-nat.c (spu_bfd_open): Use gdb_bfd_ref, gdb_bfd_unref.
* solib.c: Include gdb_bfd.h.
(solib_bfd_fopen): Use gdb_bfd_ref.
(solib_bfd_open): Use gdb_bfd_unref.
(free_so_symbols): Use gdb_bfd_unref.
(reload_shared_libraries_1): Use gdb_bfd_unref.
* solib-spu.c: Include gdb_bfd.h.
(spu_bfd_fopen): Use gdb_bfd_ref, gdb_bfd_unref.
* solib-pa64.c (pa64_solib_create_inferior_hook): Use gdb_bfd_ref,
gdb_bfd_unref.
* solib-frv.c: Include gdb_bfd.h.
(enable_break2): Use gdb_bfd_unref.
* solib-dsbt.c: Include gdb_bfd.h.
(enable_break2): Use gdb_bfd_unref.
* solib-darwin.c: Include gdb_bfd.h.
(darwin_solib_get_all_image_info_addr_at_init): Use gdb_bfd_ref,
gdb_bfd_unref.
(darwin_bfd_open): Use gdb_bfd_unref.
* rs6000-nat.c (add_vmap): Use gdb_bfd_ref, gdb_bfd_unref.
* remote-mips.c: Include gdb_bfd.h.
(mips_load_srec): Use gdb_bfd_ref.
(pmon_load_fast): Use gdb_bfd_ref.
* remote-m32r-sdi.c: Include gdb_bfd.h.
(m32r_load): Use gdb_bfd_ref.
* record.c: Include gdb_bfd.h.
(record_save_cleanups): Use gdb_bfd_unref.
(cmd_record_save): Use gdb_bfd_unref.
* procfs.c (insert_dbx_link_bpt_in_file): Use gdb_bfd_ref,
gdb_bfd_unref.
* objfiles.h (gdb_bfd_close_or_warn): Remove.
(gdb_bfd_ref, gdb_bfd_unref): Move to gdb_bfd.h.
* objfiles.c: Include gdb_bfd.h.
(free_objfile): Use gdb_bfd_unref.
(gdb_bfd_close_or_warn, gdb_bfd_ref, gdb_bfd_unref): Move to
gdb_bfd.c.
* machoread.c (macho_add_oso_symfile): Use gdb_bfd_unref.
(macho_symfile_read_all_oso): Use gdb_bfd_ref, gdb_bfd_unref.
(macho_check_dsym): Likewise.
* m32r-rom.c: Include gdb_bfd.h.
(m32r_load): Use gdb_bfd_ref.
(m32r_upload_command): Use gdb_bfd_ref.
* jit.c: Include gdb_bfd.h.
(jit_bfd_try_read_symtab): Use gdb_bfd_ref, gdb_bfd_unref.
* gdb_bfd.h: New file.
* gdb_bfd.c: New file.
* gcore.c: Include gdb_bfd.h.
(create_gcore_bfd): Use gdb_bfd_ref.
(do_bfd_delete_cleanup): Use gdb_bfd_unref.
(gcore_command): Use gdb_bfd_unref.
* exec.c: Include gdb_bfd.h.
(exec_close): Use gdb_bfd_unref.
(exec_close_1): Use gdb_bfd_unref.
(exec_file_attach): Use gdb_bfd_ref.
* elfread.c: Include gdb_bfd.h.
(build_id_verify): Use gdb_bfd_unref.
* dsrec.c: Include gdb_bfd.h.
(load_srec): Use gdb_bfd_ref.
* corelow.c: Include gdb_bfd.h.
(core_close): Use gdb_bfd_unref.
(core_open): Use gdb_bfd_ref.
* bfd-target.c: Include gdb_bfd.h.
(target_bfd_xclose): Use gdb_bfd_unref.
(target_bfd_reopen): Use gdb_bfd_ref.
* Makefile.in (SFILES): Add gdb_bfd.c.
(HFILES_NO_SRCDIR): Add gdb_bfd.h.
(COMMON_OBS): Add gdb_bfd.o.
