pass an appropriate -rpath option. Use the make variable SONAME
as the shared library soname, rather than computing it here. On
SunOS, build stamp-tshlink in place of $(SHLINK).
* Makefile.in (SONAME): New variable.
($(SHLINK)): Make a link to the transformed name, as well.
(stamp-tshlink): New target.
(install): Skip stamp-tshlink during install.
double-clicking will work again.
(create_asm_win): Put "break" at end of all B1 bindings.
(create_file_win): Lower "sel" tag, don't raise it.
(ensure_line_visible): New proc.
(update_listing, update_assembly): Use it.
(create_copyright_window): Destroy window on Leave event.
(create_command_window): Put "break" at end of all B2 bindings.
(reg): Add HX instructions.
start-sanitize-i960xl
The HX instructions are the XL instructions, so this just involves
arranges for them to not be sanitized.
end-sanitize-i960xl
(arch_tab): Add HX.
(targ_has_sfr): Handle ARCH_HX.
(targ_has_iclass): Handle ARCH_HX.
(tc_coff_fix2rtype): Add return 0 to avoid warning.
(tc_headers_hook): If the architecture was specified explicitly,
use it when setting the flags. Set the extern variable coff_flags
rather than headers->filehdr.f_flags, since the latter is set
unconditionally in obj-coff.c.
(i960_handle_align): Remove unused variable fixp.
patches from Alan Modra <alan@spri.levels.unisa.edu.au>:
* Makefile.in (LIBDEPS): New variable.
(LIBS): Use -L../bfd -lbfd.
(gprof): Depend upon $(LIBDEPS) rather than $(LIBS).
patches from Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Set OPCODES and BFD to search directories.
Substitute OPCODES_DEP and BFDDEP. On SunOS, set HLDFLAGS.
* configure: Rebuild.
* Makefile.in (LDFLAGS, HLDFLAGS): New variables.
(LIBDEPS): New variable.
(as.new0: Depend upon $(LIBDEPS) rather than $(LIBS). Use
$(HLDFLAGS) in link.
(check): Set LD_LIBRARY_PATH in the environment.
patches from Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in (HLDFLAGS): New substitution.
* configure: Rebuild.
* configure.host: Set HLDFLAGS on SunOS.
* Makefile.in (HLDFLAGS): New variable.
(BFDDEP): New variable.
(BFDLIB): Change to -L../bfd -lbfd.
($(LD_PROG)): Depend upon $(BFDDEP) rathern than $(BFDLIB). Use
$(HLDFLAGS) in link.
(check): Set LD_LIBRARY_PATH in the environment.
Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
* configure: Rebuild.
* Makefile.in (ALLLIBS): New variable.
(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
(COMMON_SHLIB, SHLINK): New variables.
(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
(STAGESTUFF): Remove variable.
(all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
(stamp-piclist, piclist): New targets.
($(SHLIB), $(SHLINK)): New targets.
($(OFILES)): Depend upon stamp-picdir.
(disassemble.o): Build twice if PICFLAG is set.
(MOSTLYCLEAN): Add pic/*.o.
(clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
(distclean): Remove pic and stamp-picdir.
(install): Install shared libraries.
(stamp-picdir): New target.
Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
SHLIB_CFLAGS, COMMON_SHLIB, PICLIST, SHLINK.
* configure: Rebuild.
* configure.host: If --enable-shared, adjust shared library stuff
based on the host. If the host is SunOS, and the linker supports
-rpath, set HLDFLAGS to use it.
* Makefile.in (ALLLIBS): New variable.
(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
(COMMON_SHLIB, SHLINK): New variables.
(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
(STAGESTUFF): Remove variable.
(all): Depend upon $(ALLLIBS) and @PICLIST@ rather than
$(TARGETLIB).
(stamp-ofiles): New target, like old ofiles target, but build
using a temporary file and move-if-change, and touch stamp-ofiles
when done.
(ofiles): Just depend upon stamp-ofiles.
(stamp-piclist, piclist): New targets.
($(SHLIB), $(SHLINK)): New targets.
(targets.o, archures.o): Build twice if PICFLAG is set.
(do_mostlyclean): Remove pic/*.o.
(do_clean): Remove stamp-ofiles, $(SHLIB), $(SHLINK), piclist, and
stamp-piclist.
(do_distclean): Remove pic and stamp-picdir.
(install): Install shared libraries.
($(OFILES)): Depend upon stamp-picdir.
(stamp-picdir): New target.
AT_name tag is missing.
* procfs.c (procfs_stopped_by_watchpoint): Fix logic when
FLTWATCH and FLTKWATCH are defined.
* remote.c (remote_read_bytes): Advance memaddr for transfers,
return number of bytes transferred for partial reads.
* top.c (init_signals): Reset SIGTRAP to SIG_DFL.
than comparing S_GET_SEGMENT to undefined_section.
(write_object_file): Skip symbols which were equated to an
undefined or common symbol.
* symbols.c (resolve_symbol_value): Use S_IS_DEFINED and
S_IS_COMMON rather than comparing S_GET_SEGMENT to
undefined_section.
(S_GET_VALUE): Likewise. Avoid recursion problems if S_IS_DEFINED
or S_IS_COMMON call S_GET_VALUE.
* config/obj-aout.h (S_IS_COMMON): Define if not BFD_ASSEMBLER.
* config/obj-aout.c (obj_emit_relocations): If a reloc is equated
to an undefined or common symbol, convert the reloc to be against
the target symbol.
(obj_crawl_symbol_chain): Skip symbols which were equated to an
undefined or common symbol.
* config/obj-bout.h (S_IS_COMMON): Define if not BFD_ASSEMBLER.
* config/obj-bout.c (obj_emit_relocations): If a reloc is equated
to an undefined or common symbol, convert the reloc to be against
the target symbol.
(obj_crawl_symbol_chain): Skip symbols which were equated to an
undefined or common symbol.
* config/obj-coff.c (do_relocs_for): Use S_IS_DEFINED and
S_IS_COMMON rather than comparing S_GET_SEGMENT to
undefined_section.
(yank_symbols): Skip symbols which were equated to an undefined or
common symbol.
the executable, not the .o to run the tests from.
Remove a useless step and avoid loading a .o into a target board
(loads into address zero which causes all kinds of problems).
* elf.c (_bfd_elf_link_hash_newfunc): Set elf_link_hash_flags to
ELF_LINK_NON_ELF.
* elflink.h (elf_link_add_object_symbols): Reset ELF_LINK_NON_ELF
flag for a newly defined symbol.
(NAME(bfd_elf,record_link_assignment)): Likewise.
(elf_adjust_dynamic_symbol): If ELF_LINK_NON_ELF is set, try to
set the DEF or REF_REGULAR flags correctly.
