This commit creates a new file, common/gdb_setjmp.h, to hold some
portability macros for setjmp/longjmp et al. that are used by the
exceptions subsystem and by the demangler crash catcher.
gdb/ChangeLog:
* common/gdb_setjmp.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add common/gdb_setjmp.h.
* configure.ac: Move sigsetjmp check...
* common/common.m4: ...here.
* configure: Regenerate.
* cp-support.c (SIGJMP_BUF): Delete.
(SIGSETJMP): Likewise.
(SIGLONGJMP): Likewise.
* exceptions.h (gdb_setjmp.h): Include.
(setjmp.h): Do not include.
(EXCEPTIONS_SIGJMP_BUF): Delete.
(EXCEPTIONS_SIGSETJMP): Likewise.
(EXCEPTIONS_SIGLONGJMP): Likewise.
Replace all uses of EXCEPTIONS_SIG* macros with SIG* macros
from gdb_setjmp.h.
* exceptions.c: Likewise.
gdb/gdbserver/ChangeLog:
* config.in: Regenerate.
* configure: Likewise.
This commit moves cleanups.[ch] into gdb/common/. The only change to
the content of the files is that cleanups.c's include list was altered
to match its new location.
gdb/ChangeLog:
* cleanups.h: Moved to...
* common/cleanups.h: New file.
* cleanups.c: Moved to...
* common/cleanups.c: New file. Include common-defs.h and
cleanups.h. Do not include defs.h.
* Makefile.in (SFILES): Replace cleanups.c with common/cleanups.c.
(HFILES_NO_SRCDIR): Replace cleanups.h with common/cleanups.h.
(cleanups.o): New rule.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Add common/cleanups.c.
(OBS): cleanups.o.
(cleanups.o): New rule.
Various warnings are emitted during startup and option-parsing using
fprintf_unfiltered. One warning is prefixed with the command name,
the others are not. This commit replaces these hardwired warnings
with calls to warning. It also sets warning_pre_print to prefix all
warnings with the command name until option parsing is complete.
gdb/ChangeLog:
* main.c (captured_main): Use warning during startup.
Prefix startup warning messages with command name.
This commit replaces the hardwired fprintf/exit error handlers
for usage errors with calls to error.
gdb/ChangeLog:
* main.c (captured_main): Handle usage errors with error.
go32_create_inferior invokes a hardwired fprintf/exit error handler
if v2loadimage fails. I could find no reason for this other than that
the block seems to have been copy-and-pasted from v2loadimage's
manpage. This commit replaces the hardwired handler with a call to
error.
gdb/ChangeLog:
* go32-nat.c (go32_create_inferior): Replace a fprintf/
exit pair with a call to error. Wrap the message with _().
If the requested interpreter cannot be set captured_main reports the
error with a hardwired fprintf/exit pair. A fprintf/exit pair on the
previous line was replaced with a call to error in March 2003
(https://sourceware.org/ml/gdb-patches/2003-03/msg00444.html) but I
found no documentation as to why this particular hardwired handler
was left untouched. I was also unable to come up with a situation
where error would not be suitable, so I have replaced it with a call
to error.
gdb/ChangeLog:
* main.c (captured_main): Replace a fprintf/exit
pair with a call to error. Wrap the message with _().
tui_initialize_io contains a pair of hardwired fprintf/exit error
handlers. I was unable to find any documentation as to why they're
hardwired (the code appeared in a monolithic block back in 2001:
https://sourceware.org/ml/gdb-patches/2001-07/msg00490.html) and I
was also unable to come up with a situation where error would not
be suitable, so I have replaced both handlers with calls to error.
gdb/ChangeLog:
* tui/tui-io.c (tui_initialize_io): Replace two fprintf/exit
pairs with calls to error. Wrap the message with _().
warning will crash if called before the first call to set_width. This
commit makes the warning usable from the moment gdb_stderr is set up.
gdb/ChangeLog:
* utils.c (vwarning): Protect calls to target_terminal_ours
and wrap_here.
error (and other exception-throwing functions) are callable from the
first line of captured_main, but the exception printing code will
crash if called before the first call to set_width. This commit makes
the exception printing code usable from the moment gdb_stderr is set
up.
gdb/ChangeLog:
* exceptions.c (print_flush): Protect calls to
target_terminal_ours and wrap_here.
internal_vproblem can be called (via malloc_failure) from almost the
first line of captured_main, but it will crash if called before the
first call to set_width. This commit makes internal_vproblem work
at any time.
There are two parts to this. If called before gdb_stderr is set up,
internal_vproblem will fall back to printing the message on regular
stderr and aborting. If called after gdb_stderr is set up but before
filtered printing is set up, internal_vproblem will operate as usual
except that it can not query whether to quit and/or dump core so it
defaults to doing both.
gdb/ChangeLog:
* utils.h (filtered_printing_initialized): New declaration.
* utils.c (abort_with_message): New function.
(internal_vproblem): Use abort_with_message for first level
recursive internal problems, and if gdb_stderr is not set up.
Protect calls to target_terminal_ours, begin_line and query.
Any error other than bfd_error_wrong_format returned from object_p()
is effectively a fatal error.
* vms-alpha.c (alpha_vma_object_p): Don't return file_truncated
error. Remove redundant bfd_set_error.
clang was using eax to construct %0 here:
asm ("mov %%eax, 0(%0)\n\t"
"mov %%ebx, 4(%0)\n\t"
"mov %%ecx, 8(%0)\n\t"
"mov %%edx, 12(%0)\n\t"
"mov %%esi, 16(%0)\n\t"
"mov %%edi, 20(%0)\n\t"
: /* no output operands */
: "r" (data)
: "eax", "ebx", "ecx", "edx", "esi", "edi");
which caused amd64-word.exp (and others similarly) to fail.
It's a perfectly legit thing for clang to do given the available data.
The patch fixes this by marking the registers as live from the
time of the preceding breakpoint.
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-pseudo.c (main): Rewrite to better specify when
eax,etc. are live with values set by gdb and thus the compiler can't
use them.
* gdb.arch/i386-pseudo.c (main): Ditto.
This commit removes the now-unused fatal function and prototype.
gdb/gdbserver/ChangeLog:
* utils.h (fatal): Remove declaration.
* utils.c (fatal): Remove function.
This commit converts four calls to fatal into calls to
perror_with_name. perror_with_name calls error, which
in IPA terminates with exit (1) rather than longjmp, so
there is no functional change here.
gdb/gdbserver/ChangeLog:
* tracepoint.c (gdb_agent_init): Replace fatal with
perror_with_name.
(initialize_tracepoint): Likewise.
This commit converts a call to fatal in remote_prepare with a call to
error. remote_prepare is called precisely once, from main, at a point
where jumping to toplevel will call exit (1), so error and fatal are
functionally equivalent at this point. Note that remote_prepare calls
perror_with_name (which calls error) so callers of remote_prepare must
already handle the fact that it may exit via longjmp.
gdb/gdbserver/ChangeLog:
* remote-utils.c (remote_prepare): Replace fatal with error.
This commit downgrades a fatal error to a warning in linux_async.
linux_async is called from two different places in gdbserver:
Via target_async from handle_accept_event. The argument
is always zero, so the warning will never be printed here.
Via start_non_stop from handle_general_set. This prints
its own error message to stderr on failure, which will
be preceded by the warning if it is emitted.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_async): Replace fatal with warning.
Tidy up and return.
(linux_start_non_stop): Return -1 if linux_async failed.
This commit converts if..fatal checks in both i386_dr_low_set_addr
implementations to gdb_asserts. It's not obvious from the context,
but the conditional in both cases is changed to match the equivalent
conditional in the i386_dr_low_get_addr implementations. Nothing
fundamental has changed because DR_FIRSTADDR is zero. This commit
also removes a vague comment in Linux i386_dr_low_get_addr. I could
have reworded the comment (and replicated it three times for the other
identical assertions) but I think the existence of specific functions
for the status and control registers makes it fairly obvious what is
going on.
gdb/gdbserver/ChangeLog:
* linux-x86-low.c (i386_dr_low_set_addr): Replace check with
gdb_assert.
(i386_dr_low_get_addr): Remove vague comment.
* win32-i386-low.c (i386_dr_low_set_addr): Replace check with
gdb_assert.
GDB and SIM both have functions called "debug_printf", which conflicts
at link time. This commit shadows SIM's debug_printf with a macro so
that SIM's symbol ends up being called "sim_debug_printf".
sim/common/ChangeLog:
* sim-trace.h (debug_printf): New define.
Hi,
This patch is to handle a software watchpoint case that program returns
to caller's epilogue, and it causes the fail in thumb mode,
finish^M
Run till exit from #0 func () at gdb/testsuite/gdb.base/watchpoint-cond-gone.c:26^M
0x000001f6 in jumper ()^M
(gdb) FAIL: gdb.base/watchpoint-cond-gone.exp: Catch the no longer valid watchpoint
In the test, jumper calls func, and programs returns from func to
jumper's epilogue, IOW, the branch instruction is the last instruction
of jumper's function body.
jumper:
.....
0x000001f2 <+10>: bl 0x200 [1] <---- indirect call to func
0x000001f6 <+14>: mov sp, r7 [2] <---- start of the epilogue
0x000001f8 <+16>: add sp, #8
0x000001fa <+18>: pop {r7}
0x000001fc <+20>: pop {r0}
0x000001fe <+22>: bx r0
When the inferior returns from func back to jumper, it is expected
that an expression of a software watchpoint becomes out-of-scope.
GDB validates the expression by checking the corresponding frame,
but this check is guarded by gdbarch_in_function_epilogue_p. See
breakpoint.c:watchpoint_check.
It doesn't work in this case, because program returns from func's
epilogue back to jumper's epilogue [2], GDB thinks the program is
still within the epilogue, but in fact it goes to a different one.
When PC points at [2], the sp-restore instruction is to be
executed, so the stack frame isn't destroyed yet and we can still
use the frame mechanism reliably.
Note that when PC points to the first instruction of restoring SP,
it is part of epilogue, but we still return zero. When goes to
the next instruction, the backward scan will still match the
epilogue sequence correctly. The reason for doing this is to
handle the "return-to-epilogue" case.
What this patch does is to restrict the epilogue matching that let
GDB think the first SP restore instruction isn't part of the epilogue,
and fall back to use frame mechanism. We set 'found_stack_adjust'
zero before backward scan, and we've done this for arm mode
counterpart (arm_in_function_epilogue_p) too.
The patch is tested in arm-none-eabi and arm-none-linux-gnueabi with
various multilibs. OK to apply?
gdb:
2014-08-28 Yao Qi <yao@codesourcery.com>
* arm-tdep.c (thumb_in_function_epilogue_p): Don't set
found_stack_adjust in forward scan. Remove condition check
on found_stack_adjust which is always true. Indent the code.
Hi,
dwarf_decode_lines is called in two functions,
dwarf2_build_include_psymtabs and handle_DW_AT_stmt_list, in which, 1
is passed to argument 'want_line_info' and 'want_line_info' is a
conditional variable in dwarf_decode_lines. We can simplify it by
removing 'want_line_info' and propagating the constant 1 into
dwarf_decode_lines. This is what this patch does. This patch also
remove one line comment about WANT_LINE_INFO in
handle_DW_AT_stmt_list, as handle_DW_AT_stmt_list doesn't have such
argument.
gdb:
2014-08-28 Yao Qi <yao@codesourcery.com>
* dwarf2read.c (dwarf_decode_lines): Update declaration.
(handle_DW_AT_stmt_list): Remove comment about WANT_LINE_INFO.
(dwarf_decode_lines): Remove argument
want_line_info. Remove condition check on want_line_info.
Callers update.
The TUI terminal state becomes corrupted (e.g. key sequences such as
Alt_F and Alt_B no longer work) when one attaches to an inferior process
(via "run" or "attach") from within TUI. This terminal corruption
remains until you switch out of TUI mode.
This happens because the terminal state is not properly saved when
switching to and out from TUI mode. Although the functions tui_enable()
and tui_disable() both call the function target_terminal_save_ours() to
save the terminal state, this function is a no-op unless GDB has already
attached to an inferior process. This is because only the "native"
target has a useful implementation of target_terminal_save_ours()
(namely child_terminal_save_ours()) and we only have the "native" target
in our target vector if GDB has already attached to an inferior process.
So without an inferior process, switching to and from TUI mode does not
actually save the terminal state. Therefore when you attach to an
inferior process from within TUI mode, the proper terminal state is not
restored (after swapping from the inferior's terminal back to the GDB
terminal).
To fix this we just have to ensure that the terminal state is always
being properly saved when switching from and to TUI mode. To achieve
this, this patch removes the polymorphic function
target_terminal_save_ours() and replaces it with a regular function
gdb_save_tty_state() that always saves the terminal state.
Tested on x86_64-unknown-linux-gnu by running "make check", no new
regressions.
gdb/ChangeLog:
* target.h (struct target_ops::to_terminal_save_ours): Remove
declaration.
(target_terminal_save_ours): Remove macro.
* target-delegates.c: Regenerate.
* inf-child.c (inf_child_target): Don't set the nonexistent
field to_terminal_save_ours.
* inferior.h (child_terminal_save_ours): Remove declaration.
* terminal.h (gdb_save_tty_state): New declaration.
* inflow.c (child_terminal_save_ours): Rename to ...
(gdb_save_tty_state): ... this.
* tui/tui.c: Include terminal.h.
(tui_enable): Use gdb_save_tty_state instead of
target_terminal_save_ours.
(tui_disable): Likewise.
This began as an attempt to make a few small changes to src-release
but heeding the comments at the top of the file it seemed it might be
wise to convert it to a shell script instead which should hopefully
be more maintainable.
This shell script contains most of the functionality of the Makefile
version. It can be run like this:
# This will build gdb and compress with bzip2, gzip and xz
./src-release.sh -bgx gdb
The functionality that has been removed is building tarballs for insight
and gnats, which were broken in the current repository layout and
gas+binutils which amounted to basically the same thing as binutils so
didn't seem worth keeping. The script always builds a tar file,
compression is optional, so no need for specific commands to build tar
files rather than compressed tar files.
The build of gas releases has been fixed, as has extraction of version
numbers which had been broken since the switch to configure.ac files
and AC_INIT.
I also removed the code for distcleaning the intl sub-directory as it
seems like that issue has been fixed.
The script is capable of compressing with bzip2, gzip and xz which
should cover all formats available on gnu.org.
I tested it by producing release tarballs which are substantially
identical to the ones produced by the src-release script.
ChangeLog:
2014-08-27 Will Newton <will.newton@linaro.org>
* src-release.sh: New file.
* src-release: Remove file.
gas/
* config/tc-arm.c (aeabi_set_public_attributes): Update intended_arch based
on the info we got during parsing.
(arm_handle_align): Make sure the p2align expanding logic under thumb
unchanged.
gas/testsuite/
* gas/arm/blx-bl-convert.d: New testcase.
* gas/arm/blx-bl-convert.l: Warning expectation.
* gas/arm/blx-bl-convert.s: Source file.
2014-08-26 Jiong Wang <jiong.wang@arm.com>
bfd/
* elfnn-aarch64.c (elfNN_aarch64_check_relocs): Initialize non_got_ref
properly for MOVW_G0/1/2_NC and MOVW_G3. Reject them when linking
shared library.
(elfNN_aarch64_gc_sweep_hook): Add check on these relocs.
ld/testsuite/
* ld-aarch64/copy-relocs-so.s: New test file.
* ld-aarch64/copy-relocs-exe.s: Likewise.
* ld-aarch64/copy-relocs.d: New expectation file.
* ld-aarch64/emit-relocs-264-bad.d: New test file.
* ld-aarch64/emit-relocs-266-bad.d: Likewise.
* ld-aarch64/emit-relocs-268-bad.d: Likewise.
* ld-aarch64/emit-relocs-269-bad.d: Likewise.
* ld-aarch64/aarch64-elf.exp: Run new added test.
Resolves PR 17312
* ld-aarch64/eh-frame-foo.s: Use 8-byte offset for X30.
* ld-aarch64/eh-frame-bar.s: Likewise.
* ld-aarch64/eh-frame.d: Updated to match current readelf output.
* ld-elf/eh5.d: Allow any register names.
This change moves the microMIPS 10-bit uninterpreted immediate code
embedded at bits 25..16 in the SYSCALL, WAIT, SDBBP and HYPCALL
instructions from `B' over to `+J' which is the operand code used in
the standard MIPS instruction set for a similar code embedded at bits
20..11, currently used by HYPCALL only in that set.
opcodes/
* micromips-opc.c (decode_micromips_operand): Rename `B' to `+J'.
(micromips_opcodes): Use "+J" in place of "B" for "hypcall",
"sdbbp", "syscall" and "wait".
include/opcode/
* mips.h: Document the move of `MICROMIPSOP_*_CODE10' from `B'
over to `+J'.
This change removes code duplication for the SAA macro in line with other
such macros and also adds a !microMIPS internal consistency guard as
there's no microMIPS encoding of the underlying SAA/SAAD instructions.
* config/tc-mips.c (macro) <M_SAA_AB>: Remove duplicate code and
jump to...
<M_SAAD_AB>: ... here. Assert that !microMIPS.
