This patch adds a typedef target_xfer_partial_ftype. When we change
the signature of xfer_partial functions (for example, adding a new
parameter), we don't have to modify all of their declarations.
This patch also updates the type of parameters of target_xfer_partial
from "void *" to "gdb_byte *".
gdb:
2013-12-18 Yao Qi <yao@codesourcery.com>
* target.h (target_xfer_partial_ftype): New typedef.
(target_xfer_partial): Update declaration.
* auxv.h (memory_xfer_auxv): Likewise.
* ia64-hpux-nat.c (super_xfer_partial): Likewise.
* ia64-linux-nat.c (super_xfer_partial): Likewise.
* linux-nat.c (super_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-full.c (record_full_beneath_to_xfer_partial):
(tmp_to_xfer_partial): Likewise.
* sparc-nat.c (inf_ptrace_xfer_partial): Likewise.
* target.c (default_xfer_partial): Likewise.
(current_xfer_partial): Likewise.
(target_xfer_partial): Change parameter type to 'gdb_byte *'.
This patch is purely mechanical. It removes gdb_stat.h and changes
the code to use sys/stat.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_stat.h: Remove.
* ada-lang.c: Use sys/stat.h, not gdb_stat.h.
* common/filestuff.c: Use sys/stat.h, not gdb_stat.h.
* common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h.
* corefile.c: Use sys/stat.h, not gdb_stat.h.
* ctf.c: Use sys/stat.h, not gdb_stat.h.
* darwin-nat.c: Use sys/stat.h, not gdb_stat.h.
* dbxread.c: Use sys/stat.h, not gdb_stat.h.
* dwarf2read.c: Use sys/stat.h, not gdb_stat.h.
* exec.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h.
* inf-child.c: Use sys/stat.h, not gdb_stat.h.
* jit.c: Use sys/stat.h, not gdb_stat.h.
* linux-nat.c: Use sys/stat.h, not gdb_stat.h.
* m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h.
* main.c: Use sys/stat.h, not gdb_stat.h.
* mdebugread.c: Use sys/stat.h, not gdb_stat.h.
* mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h.
* nto-tdep.c: Use sys/stat.h, not gdb_stat.h.
* objfiles.c: Use sys/stat.h, not gdb_stat.h.
* procfs.c: Use sys/stat.h, not gdb_stat.h.
* remote-fileio.c: Use sys/stat.h, not gdb_stat.h.
* remote-mips.c: Use sys/stat.h, not gdb_stat.h.
* remote.c: Use sys/stat.h, not gdb_stat.h.
* rs6000-nat.c: Use sys/stat.h, not gdb_stat.h.
* sol-thread.c: Use sys/stat.h, not gdb_stat.h.
* solib-spu.c: Use sys/stat.h, not gdb_stat.h.
* source.c: Use sys/stat.h, not gdb_stat.h.
* symfile.c: Use sys/stat.h, not gdb_stat.h.
* symmisc.c: Use sys/stat.h, not gdb_stat.h.
* symtab.c: Use sys/stat.h, not gdb_stat.h.
* top.c: Use sys/stat.h, not gdb_stat.h.
* xcoffread.c: Use sys/stat.h, not gdb_stat.h.
This removes gdb_dirent.h and updates the code to use dirent.h
instead. It also removes the now-useless configure checks.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/common.m4 (GDB_AC_COMMON): Don't use AC_HEADER_DIRENT.
* common/gdb_dirent.h: Remove.
* common/filestuff.c: Use dirent.h.
* common/linux-osdata.c: Use dirent.h.
(NAMELEN): Define.
* config.in: Rebuild.
* configure: Rebuild.
* configure.ac: Don't use AC_HEADER_DIRENT.
* linux-fork.c: Use dirent.h
* linux-nat.c: Use dirent.h.
* nto-procfs.c: Use dirent.h.
* procfs.c: Use dirent.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* config.in: Rebuild.
* configure: Rebuild.
* configure.ac: Don't use AC_HEADER_DIRENT.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
This patch constifies the target_ops method to_detach.
This is a small cleanup, but also, I think, a bug-prevention fix,
since gdb already acts as if the "args" argument here was const.
In particular, top.c:quit_force calls kill_or_detach via
iterate_over_inferiors. kill_or_detach calls target_detach, passing
the same argument each time. So, if one of these methods was not
const-correct, then kill_or_detach would change its behavior in a
strange way.
I could not build every target I modified in this patch. I've
inspected them all by hand, though. Many targets do not use the
"args" parameter; a couple pass it to atoi; and a few pass it on to
the to_detach method of the target beneath. The only code that
required a real change was in linux-nat.c, and that only needed the
introduction of a temporary variable for const-correctness.
2013-11-08 Tom Tromey <tromey@redhat.com>
* aix-thread.c (aix_thread_detach): Update.
* corelow.c (core_detach): Update.
* darwin-nat.c (darwin_detach): Update.
* dec-thread.c (dec_thread_detach): Update.
* gnu-nat.c (gnu_detach): Update.
* go32-nat.c (go32_detach): Update.
* inf-ptrace.c (inf_ptrace_detach): Update.
* inf-ttrace.c (inf_ttrace_detach): Update.
* linux-fork.c (linux_fork_detach): Update.
* linux-fork.h (linux_fork_detach): Update.
* linux-nat.c (linux_nat_detach): Update. Introduce "tem"
local for const-correctness.
* linux-thread-db.c (thread_db_detach): Update.
* monitor.c (monitor_detach): Update.
* nto-procfs.c (procfs_detach): Update.
* procfs.c (procfs_detach): Update.
* record.c (record_detach): Update.
* record.h (record_detach): Update.
* remote-m32r-sdi.c (m32r_detach): Update.
* remote-mips.c (mips_detach): Update.
* remote-sim.c (gdbsim_detach): Update.
* remote.c (remote_detach_1, remote_detach)
(extended_remote_detach): Update.
* sol-thread.c (sol_thread_detach): Update.
* target.c (target_detach): Make "args" const.
(init_dummy_target): Update.
* target.h (struct target_ops) <to_detach>: Make argument const.
(target_detach): Likewise.
* windows-nat.c (windows_detach): Update.
detach_fork.
* inf-ptrace.c (inf_ptrace_follow_fork): Likewise.
* inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
* inferior.h (detach_fork): Remove.
* infrun.c (detach_fork): Adjust comment and make it
static.
(follow_fork): Pass detach_fork parameter to
target_follow_fork.
* linux-nat.c (linux_child_follow_fork): New parameter
detach_fork.
* target.c (target_follow_fork): New parameter detach_fork.
Pass detach_fork as parameter and print its value.
* target.h (struct target_ops) <to_follow_fork>: New int
parameter.
(target_follow_fork): New parameter detach_fork.
In http://sourceware.org/ml/gdb-patches/2013-08/msg00174.html , the
issue of child signal handling around ptrace option support discovery
being different between GDB and GDBserver came up.
I recalled adding these block_child_signals calls, and the "We don't
want those ptrace calls to be interrupted" comment, but not exactly
why. So I looked into it. My first guess is that I got confused.
The patch that added this
<http://sourceware.org/ml/gdb-patches/2009-04/msg00125.html> rewrote
the linux native async support completely, and the old async support
code had the SIGCHLD handler itself do waitpid, so in places that we'd
want a blocking waitpid, we'd have to have the signal handler blocked.
That was probably the mindset I had at the time. Anyway, whatever the
case, looks like I was wrong on the need for this blocking.
Given GDBserver doesn't block like this, I investigated why this is
currently needed on GDB but not on GDBserver.
I removed the block_child_signals (and restore) calls, and hacked
linux-nat.c to call linux_test_for_tracefork in a loop, like:
@@ -534,7 +534,10 @@ static int
linux_supports_tracefork (int pid)
{
if (linux_supports_tracefork_flag == -1)
- linux_test_for_tracefork (pid);
+ {
+ while (1)
+ linux_test_for_tracefork (pid);
+ }
return linux_supports_tracefork_flag;
}
Running the resulting GDB, I then saw bad things happening.
Specifically, I'd end up with a bunch of zombies, and eventually, the
machine would refuse to spawn new processes, claming insufficient
resources.
The issue is that linux_test_for_tracefork test forks, and has the
child fork again. If we don't block SIGCHLD on entry to the function,
the children will inherit SIGCHLD's action/disposition (meaning,
SIGCHLD will be unblocked in the child). When the first child forks
again a second child, and that child exits, the first child gets a
SIGCHLD. Now, when we try to wrap up for the whole options test, we
kill the first child, and collect the waitstatus. Here, when SIGCHLD
isn't blocked, GDB will first see the child reporting a stop with
SIGCHLD. gdbserver's ptrace options test does a PTRACE_KILL loop at
the end, which catches the SIGCHLD, and retries the kill. The GDB
version did not do that. So the GDB version would proceed, leaving
the child zombie (until GDB exists), as nothing collected its final
waitstatus.
So this patch makes the GDB version of linux_test_for_tracefork do the
exact same as the GDBserver version, removes all this unnecessary
blocking throughout, and adds a couple comments at places that do need
it -- namely: places where we'll use sleep with sigsuspend; and
linux_async_pipe, as that destroys the pipe the signal handler
touches.
Tested on x86_64 Fedora 17, sync and async.
gdb/
2013-08-19 Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_test_for_tracefork)
(linux_test_for_tracesysgood, linux_child_follow_fork)
(lin_lwp_attach_lwp, linux_nat_resume): Don't block child signals.
(linux_nat_wait_1): Extend comment.
(linux_async_pipe): Add comment.
With the pathmax gnulib module in place, we can use PATH_MAX
consistently throughout, instead of the current mixbag of PATH_MAX and
MAXPATHLEN uses. It's no longer necessary to include sys/param.h
(supposedly, I can't check all ports touched here) for MAXPATHLEN.
Don't remove sys/param.h from GDB's configure.ac, as later tests in
the file use HAVE_SYS_PARAM_H checks.
Tested on x86_64 Fedora 17.
Also cross-built for --host=i686-w64-mingw32, and --host=i586-pc-msdosdjgpp.
gdb/
2013-07-01 Pedro Alves <palves@redhat.com>
* defs.h: Include "pathmax.h".
* utils.c: Don't include sys/param.h.
(gdb_realpath): Remove code that checks for MAXPATHLEN.
* solib-ia64-hpux.c (ia64_hpux_handle_load_event): Use PATH_MAX
instead of MAXPATHLEN.
* solib-sunos.c: Don't include sys/param.h.
* xcoffread.c: Don't include sys/param.h.
* bsd-kvm.c: Don't include sys/param.h.
* darwin-nat.c: Don't include sys/param.h.
(darwin_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
* darwin-nat-info.c: Don't include sys/param.h.
* fbsd-nat.c (fbsd_pid_to_exec_file): Use PATH_MAX instead of
MAXPATHLEN.
* i386obsd-nat.c: Don't include sys/param.h.
* inf-child.c: Don't include sys/param.h.
(inf_child_fileio_readlink): Use PATH_MAX instead of MAXPATHLEN.
* linux-fork.c: Don't include sys/param.h.
(fork_save_infrun_state): Use PATH_MAX instead of MAXPATHLEN.
* linux-nat.c: Don't include sys/param.h.
(linux_child_pid_to_exec_file, linux_proc_pending_signals)
(linux_proc_pending_signals): Use PATH_MAX instead of MAXPATHLEN.
* m68klinux-nat.c: Don't include sys/param.h.
* nbsd-nat.c: Don't include sys/param.h.
(nbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
* ppc-linux-nat.c: Don't include sys/param.h.
* rs6000-nat.c: Don't include sys/param.h.
* spu-linux-nat.c. Don't include sys/param.h.
* windows-nat.c: Don't include sys/param.h.
* xtensa-linux-nat.c: Don't include sys/param.h.
* config/i386/nm-fbsd.h: Don't include sys/param.h.
gdb/gdbserver/
2013-07-01 Pedro Alves <palves@redhat.com>
* server.h: Include "pathmax.h".
* linux-low.c: Don't include sys/param.h.
(linux_pid_exe_is_elf_64_file): Use PATH_MAX instead of
MAXPATHLEN.
* win32-low.c: Don't include sys/param.h.
(win32_create_inferior): Use PATH_MAX instead of MAXPATHLEN.
Oleg Nesterov told me that the Linux kernel copies the parent's ptrace
options to fork/clone children, so there's no need for GDB to do that
manually.
I was actually a bit surprised, since I thought the ptracer had to
always set the ptrace options itself, and GDB is indeed calling
PTRACE_SETOPTIONS for each new fork child, if it'll stay attached.
Looking at the history of that code, I found that is was actually I
who added that set-ptrace-options-in-children bit, back in
http://sourceware.org/ml/gdb-patches/2009-05/msg00656.html. But,
honestly, I don't recall why I needed that. I think I may have just
blindly believed it was necessary.
I then looked back at the history of all the PTRACE_SETOPTIONS code we
have, and found that gdb never did copy the ptrace options before my
patch. But, when gdbserver learnt to use PTRACE_EVENT_CLONE, at
http://sourceware.org/ml/gdb-patches/2007-10/msg00547.html, it was
made to do 'ptrace (PTRACE_SETOPTIONS, new_pid, 0,
PTRACE_O_TRACECLONE)' for all new clones. Hmmm. But, GDB itself
never did that, so it can't really ever have been necessary, I
believe, otherwise GDB should have been doing it too.
(GDBserver doesn't support following forks, and so naturally doesn't
do any PTRACE_SETOPTIONS on fork children.)
So this patch removes the -I believe- unnecessary ptrace syscalls.
Tested on x86_64 Fedora 17, native/gdbserver, and on x86_64 RHEL5
native/gdbserver (Linux 2.6.18, I think a ptrace-on-utrace kernel).
No regressions.
gdb/
2013-03-22 Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_child_follow_fork): Don't call
linux_enable_event_reporting.
(linux_handle_extended_wait): Don't call
linux_enable_event_reporting.
gdb/gdbserver/
2013-03-22 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Don't call
linux_enable_event_reporting.
While reviewing the native AArch64 patch, I noticed a problem:
On 02/06/2013 08:46 PM, Pedro Alves wrote:
>
>> > +static void
>> > +aarch64_linux_prepare_to_resume (struct lwp_info *lwp)
>> > +{
>> > + struct arch_lwp_info *info = lwp->arch_private;
>> > +
>> > + /* NULL means this is the main thread still going through the shell,
>> > + or, no watchpoint has been set yet. In that case, there's
>> > + nothing to do. */
>> > + if (info == NULL)
>> > + return;
>> > +
>> > + if (DR_HAS_CHANGED (info->dr_changed_bp)
>> > + || DR_HAS_CHANGED (info->dr_changed_wp))
>> > + {
>> > + int tid = GET_LWP (lwp->ptid);
>> > + struct aarch64_debug_reg_state *state = aarch64_get_debug_reg_state ();
> Hmm. This is always fetching the debug_reg_state of
> the current inferior, but may not be the inferior of lwp.
> I see the same bug on x86. Sorry about that. I'll fix it.
A natural fix would be to make xxx_get_debug_reg_state take an
inferior argument, but that doesn't work because of the case where we
detach breakpoints/watchpoints from the child fork, at a time there's
no inferior for the child fork at all. We do a nasty hack in
i386_inferior_data_get, but that relies on all callers pointing the
current inferior to the correct inferior, which isn't actually being
done by all callers, and I don't think we want to enforce that -- deep
in the bowls of linux-nat.c, there are many cases we resume lwps
behind the scenes, and it's be better to not have that code rely on
global state (as it doesn't today).
The fix is to decouple the watchpoints code from inferiors, making it
track target processes instead. This way, we can freely keep track of
the watchpoint mirrors for these processes behind the core's back.
Checkpoints also play dirty tricks with swapping the process behind
the inferior, so they get special treatment too in the patch (which
just amounts to calling a new hook). Instead of the old hack in
i386_inferior_data_get, where we returned a copy of the current
inferior's debug registers mirror, as soon as we detect a fork in the
target, we copy the debug register mirror from the parent to the child
process.
I don't have an old kernel handy to test, but I stepped through gdb doing
the watchpoint removal in the fork child in the watchpoint-fork test
seeing that the debug registers end up cleared in the child.
I didn't find the need for linux_nat_iterate_watchpoint_lwps. If
we use plain iterate_over_lwps instead, what happens is that
when removing watchpoints, that iterate_over_lwps doesn't actually
iterate over anything, since the fork child is not added to the
lwp list until later, at detach time, in linux_child_follow_fork.
And if we don't iterate over that lwp, we don't mark its debug
registers as needing update. But linux_child_follow_fork takes
care of doing that explicitly:
child_lp = add_lwp (inferior_ptid);
child_lp->stopped = 1;
child_lp->last_resume_kind = resume_stop;
make_cleanup (delete_lwp_cleanup, child_lp);
/* CHILD_LP has new PID, therefore linux_nat_new_thread is not called for it.
See i386_inferior_data_get for the Linux kernel specifics.
Ensure linux_nat_prepare_to_resume will reset the hardware debug
registers. It is done by the linux_nat_new_thread call, which is
being skipped in add_lwp above for the first lwp of a pid. */
gdb_assert (num_lwps (GET_PID (child_lp->ptid)) == 1);
if (linux_nat_new_thread != NULL)
linux_nat_new_thread (child_lp);
if (linux_nat_prepare_to_resume != NULL)
linux_nat_prepare_to_resume (child_lp);
ptrace (PTRACE_DETACH, child_pid, 0, 0);
so unless I'm missing something (quite possible) it ends up all
the same. But, the !detach-on-fork, and the "follow-fork child" paths
should also call linux_nat_new_thread, and they don't presently. It
seems to me in those cases we're not clearing debug regs correctly
when that's needed. Instead of copying that bit that works around
add_lwp bypassing the linux_nat_new_thread call, I thought it'd
be better to add an add_initial_lwp call to be used in the case we
really need to bypass linux_nat_new_thread, and make
add_lwp always call linux_nat_new_thread.
i386_cleanup_dregs is rewritten to forget about the current process
debug mirrors, which takes cares of other i386 ports. Only a couple
of extra tweaks here and there were needed, as some targets wheren't
actually calling i386_cleanup_dregs.
Tested on Fedora 17 x86_64 -m64/-m32.
GDBserver already fetches the i386_debug_reg_state from the right
process, and, it doesn't handle forks at all, so no fix is needed over
there.
gdb/
2013-02-13 Pedro Alves <palves@redhat.com>
* amd64-linux-nat.c (update_debug_registers_callback):
Update comment.
(amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
iterate_over_lwps.
(amd64_linux_prepare_to_resume): Pass the lwp's pid to
i386_debug_reg_state.
(amd64_linux_new_fork): New function.
(_initialize_amd64_linux_nat): Install amd64_linux_new_fork as
linux_nat_new_fork hook, and i386_forget_process as
linux_nat_forget_process hook.
* i386-linux-nat.c (update_debug_registers_callback):
Update comment.
(amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
iterate_over_lwps.
(i386_linux_prepare_to_resume): Pass the lwp's pid to
i386_debug_reg_state.
(i386_linux_new_fork): New function.
(_initialize_i386_linux_nat): Install i386_linux_new_fork as
linux_nat_new_fork hook, and i386_forget_process as
linux_nat_forget_process hook.
* i386-nat.c (i386_init_dregs): Delete.
(i386_inferior_data, struct i386_inferior_data):
Delete.
(struct i386_process_info): New.
(i386_process_list): New global.
(i386_find_process_pid, i386_add_process, i386_process_info_get):
New functions.
(i386_inferior_data_get): Delete.
(i386_process_info_get): New function.
(i386_debug_reg_state): New parameter 'pid'. Reimplement.
(i386_forget_process): New function.
(i386_cleanup_dregs): Rewrite.
(i386_update_inferior_debug_regs, i386_insert_watchpoint)
(i386_remove_watchpoint, i386_region_ok_for_watchpoint)
(i386_stopped_data_address, i386_insert_hw_breakpoint)
(i386_remove_hw_breakpoint): Adjust to pass the current process id
to i386_debug_reg_state.
(i386_use_watchpoints): Don't register inferior data.
* i386-nat.h (i386_debug_reg_state): Add new 'pid' parameter, and
adjust comment.
(i386_forget_process): Declare.
* linux-fork.c (delete_fork): Call linux_nat_forget_process.
* linux-nat.c (linux_nat_new_fork, linux_nat_forget_process_hook):
New static globals.
(linux_child_follow_fork): Don't call linux_nat_new_thread here.
(add_initial_lwp): New, factored out from ...
(add_lwp): ... this. Don't check the number of lwps before
calling linux_nat_new_thread.
(linux_nat_iterate_watchpoint_lwps): Delete.
(linux_nat_attach): Use add_initial_lwp instead of add_lwp.
(linux_handle_extended_wait): Call the linux_nat_new_fork hook on
forks and vforks.
(linux_nat_wait_1): Use add_initial_lwp instead of add_lwp for the
initial lwp.
(linux_nat_kill, linux_nat_mourn_inferior): Call
linux_nat_forget_process.
(linux_nat_set_new_fork, linux_nat_set_forget_process)
(linux_nat_forget_process): New functions.
* linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): Delete
type.
(linux_nat_iterate_watchpoint_lwps): Delete declaration.
(linux_nat_new_fork_ftype, linux_nat_forget_process_ftype): New
types.
(linux_nat_set_new_fork, linux_nat_set_forget_process)
(linux_nat_forget_process): New declarations.
* amd64fbsd-nat.c (super_mourn_inferior): New global.
(amd64fbsd_mourn_inferior): New function.
(_initialize_amd64fbsd_nat): Override to_mourn_inferior.
* windows-nat.c (windows_detach): Call i386_cleanup_dregs.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
2012-11-26 Maxime Villard <rustyBSD@gmx.fr>
Pedro Alves <palves@redhat.com>
* common/linux-osdata.c (linux_xfer_osdata_fds): Decrease buffer
size parameter passed to readlink by one byte.
* fbsd-nat.c (fbsd_pid_to_exec_file): Ditto.
* linux-nat.c (linux_child_pid_to_exec_file): Ditto.
* nbsd-nat.c (nbsd_pid_to_exec_file): Ditto.
* inf-child.c (inf_child_fileio_readlink): Decrease local buffer's
size by one byte.
gdb/gdbserver/
2012-11-26 Maxime Villard <rustyBSD@gmx.fr>
* hostio.c (handle_readlink): Decrease buffer size
parameter passed to readlink by one byte.
2012-11-09 Pedro Alves <palves@redhat.com>
* gdbarch.sh (target_gdbarch) <gdbarch.h>: Reimplement as macro.
(get_target_gdbarch) <gdbarch.h>: New function.
(startup_gdbarch) <gdbarch.h>: Declare.
<gdbarch.c> (target_gdbarch): Delete.
<gdbarch.c> (deprecated_target_gdbarch_select_hack): Set the
current inferior's gdbarch.
<gdbarch.c> (get_target_gdbarch): New function.
* inferior.c: Include target-descriptions.h.
(free_inferior): Free target description info.
(add_inferior_with_spaces): Set the inferior's initial
architecture.
(clone_inferior_command): Copy the original inferior's target
description if it was user specified.
(initialize_inferiors): Add comment.
* inferior.h (struct target_desc_info): Forward declare.
(struct inferior) <gdbarch>: New field.
* linux-nat.c: Include target-descriptions.h.
(linux_child_follow_fork): Copy the parent's architecture and
target description to the child.
* target-descriptions.c: Include inferior.h.
(struct target_desc_info): New structure, holding the equivalents
of ...
(target_desc_fetched, current_target_desc)
(target_description_filename): ... these removed globals.
(get_tdesc_info, target_desc_info_from_user_p)
(copy_inferior_target_desc_info, target_desc_info_free): New.
(target_desc_fetched, current_target_desc)
(target_description_filename): Reimplemented as convenience
macros.
(tdesc_filename_cmd_string): New global.
(set_tdesc_filename_cmd): Copy the string manipulated by the "set
tdescs filename ..." commands to the per-inferior equivalent.
(show_tdesc_filename_cmd): Get the value to show from the
per-inferior description filename.
(_initilize_target_descriptions): Change the "set/show tdesc
filename" commands' variable.
* target-descriptions.h (struct target_desc, struct target_desc_info)
(struct inferior): Forward declare.
(target_find_description, target_clear_description)
(target_current_description): Adjust comments.
(copy_inferior_target_desc_info, target_desc_info_free)
(target_desc_info_from_user_p). Declare.
gdb/testsuite/
2012-11-09 Pedro Alves <palves@redhat.com>
* gdb.multi/multi-arch.exp: New.
Before this change, detach_breakpoints would take a pid, and then
set inferior_ptid to a ptid that it constructs using pid_to_ptid (pid).
Unfortunately, this ptid is not necessarily valid. Consider for
instance the case of ia64-hpux, where ttrace refuses a register-read
operation if the LWP is not provided.
This problems shows up when GDB is trying to handle fork events.
Assuming GDB is configured to follow the parent, GDB will try to
detach from the child. But before doing so, it needs to remove
all breakpoints inside that child. On ia64, this involves reading
inferior (the child's) memory. And on ia64-hpux, reading memory
requires us to read the bsp and bspstore registers, in order to
determine where that memory is relative to the value of those
registers, and thus to determine which ttrace operation to use in
order to fetch that memory (see ia64_hpux_xfer_memory).
This patch therefore changes detach_breakpoints to take a ptid instead
of a pid, and then updates all callers.
One of the consequences of this patch is that it trips an assert
on GNU/Linux targets. But this assert appears to have not actual
purpose, and is thus removed.
gdb/ChangeLog:
* breakpoint.h (detach_breakpoints): pid parameter is now a ptid.
* breakpoint.c (detach_breakpoints): Change pid parameter into
a ptid. Adjust code accordingly.
* infrun.c (handle_inferior_event): Delete variable child_pid.
Update call to detach_breakpoints to pass the child ptid for
fork events.
* linux-nat.c (linux_nat_iterate_watchpoint_lwps): Remove
assert that inferior_ptid's lwp is zero.
(linux_handle_extended_wait): Update call to detach_breakpoints.
* inf-ttrace.c (inf_ttrace_follow_fork): Update call to
detach_breakpoints.
Code cleanup for the next patch.
* arm-linux-nat.c (arm_linux_stopped_data_address): Change variable
siginfo_p to siginfo, update its users incl. the linux_nat_get_siginfo
call for it.
* ia64-linux-nat.c (ia64_linux_stopped_data_address): Likewise.
(ia64_linux_stopped_data_address):
* linux-nat.c (linux_nat_get_siginfo): Add parameter siginfo, change
the return value.
* linux-nat.h (linux_nat_get_siginfo): Likewise.
* ppc-linux-nat.c (ppc_linux_stopped_data_address): Change variable
siginfo_p to siginfo, update its users incl. the linux_nat_get_siginfo
call for it.
2012-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdbthread.h (ALL_THREADS): New macro.
(thread_list): Declare.
* infrun.c (handle_inferior_event) <spurious signal>: Don't keep
going, but instead fall through to the stepping handling.
* linux-nat.c (resume_lwp): New parameter 'signo'. Resume with
the passed in signal. Adjust debug output.
(resume_callback): Rename to ...
(linux_nat_resume_callback): ... this. Pass the thread's last
stop signal, if in "pass" state.
(linux_nat_resume): Adjust to rename.
(stop_wait_callback): New assertion. Don't respawn signals;
instead let the LWP remain with SIGNALLED set.
(linux_nat_wait_1): Remove flushing of pending SIGSTOPs.
* remote.c (append_pending_thread_resumptions): New.
(remote_vcont_resume): Call it.
* target.h (target_resume): Extend comment.
gdb/testsuite/
2012-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.threads/siginfo-threads.exp: New file.
* gdb.threads/siginfo-threads.c: New file.
* gdb.threads/sigstep-threads.exp: New file.
* gdb.threads/sigstep-threads.c: New file.
* common/linux-procfs.c (linux_proc_get_int): New, from
linux_proc_get_tgid, change its LWPID type to pid_t, add parameter
field.
(linux_proc_get_tgid): Only call linux_proc_get_int.
(linux_proc_get_tracerpid): New.
(linux_proc_pid_has_state): New, from linux_proc_pid_is_zombie.
(linux_proc_pid_is_stopped, linux_proc_pid_is_zombie): Only call
linux_proc_pid_has_state.
* common/linux-procfs.h (linux_proc_get_tracerpid): New declaration.
* common/linux-ptrace.c: Include linux-procfs.h and buffer.h.
(linux_ptrace_attach_warnings): New.
* common/linux-ptrace.h (struct buffer, linux_ptrace_attach_warnings):
New declaration.
* linux-nat.c: Include exceptions.h, linux-ptrace.h and buffer.h.
(linux_nat_attach): New variables ex, buffer, message and message_s.
Wrap to_attach by TRY_CATCH and call linux_ptrace_attach_warnings.
gdb/gdbserver/
* linux-low.c (linux_attach_lwp_1): New variable buffer. Call
linux_ptrace_attach_warnings.
gdb/testsuite/
* gdb.base/attach-twice.c: New files.
* gdb.base/attach-twice.exp: New files.
gdb/gdbserver/
* linux-low.c (pid_is_stopped): Delete, moved to common/.
(linux_attach_lwp_1): Adjust to use linux_proc_pid_is_stopped.
gdb/
* linux-nat.c (pid_is_stopped): Delete, moved to common/.
(linux_nat_post_attach_wait): Adjust to use
linux_proc_pid_is_stopped.
* common/linux-procfs.h (linux_proc_pid_is_stopped): Declare.
* common/linux-procfs.c (linux_proc_pid_is_stopped): New function,
based on pid_is_stopped from both linux-nat.c and
gdbserver/linux-low.c, and renamed.
symfile_flags.
* solib.c (solib_read_symbols): Use inferior's symfile_flags.
* linux-nat.c (linux_child_follow_fork): Set symfile_flags on
inferior.
* infrun.c (handle_vfork_child_exec_or_exit): Set symfile_flags on
inferior.
(follow_exec): Use inferior's symfile_flags.
* inferior.h (struct inferior) <symfile_flags>: New field.
Fix watchpoints across inferior fork.
* amd64-linux-nat.c (update_debug_registers_callback): Update the
comment for linux_nat_iterate_watchpoint_lwps.
(amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
linux_nat_iterate_watchpoint_lwps.
(amd64_linux_prepare_to_resume): New comment on Linux kernel.
* i386-linux-nat.c (update_debug_registers_callback): Update the
comment for linux_nat_iterate_watchpoint_lwps.
(i386_linux_dr_set_control, i386_linux_dr_set_addr): Use
linux_nat_iterate_watchpoint_lwps.
(i386_linux_prepare_to_resume): New comment on Linux kernel.
* i386-nat.c: Include inferior.h.
(dr_mirror): Remove.
(i386_inferior_data, struct i386_inferior_data)
(i386_inferior_data_get): New.
(i386_debug_reg_state): Use i386_inferior_data_get.
(i386_cleanup_dregs, i386_update_inferior_debug_regs)
(i386_insert_watchpoint, i386_remove_watchpoint)
(i386_stopped_data_address, i386_insert_hw_breakpoint)
(i386_remove_hw_breakpoint): New variable state, use
i386_debug_reg_state instead of DR_MIRROR.
* linux-nat.c (delete_lwp): New declaration.
(num_lwps): Move here from downwards.
(delete_lwp_cleanup): New.
(linux_child_follow_fork): Create new child_lp, call
linux_nat_new_thread and linux_nat_prepare_to_resume before calling
PTRACE_DETACH.
(num_lwps): Move upwards.
(linux_nat_iterate_watchpoint_lwps): New.
* linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): New.
(linux_nat_iterate_watchpoint_lwps_ftype): New declaration.
gdb/testsuite/
Fix watchpoints across inferior fork.
* gdb.threads/watchpoint-fork-child.c: New file.
* gdb.threads/watchpoint-fork-mt.c: New file.
* gdb.threads/watchpoint-fork-parent.c: New file.
* gdb.threads/watchpoint-fork-st.c: New file.
* gdb.threads/watchpoint-fork.exp: New file.
* gdb.threads/watchpoint-fork.h: New file.
* gdbarch.c, gdbarch.h: Regenerate.
* gcore.c (gcore_memory_sections): Try gdbarch find_memory_regions
callback before falling back to target method.
* linux-nat.c (read_mapping, linux_nat_find_memory_regions): Remove.
(linux_target_install_ops): No longer install it.
* linux-tdep.c (linux_find_memory_regions): New function.
(linux_init_abi): Install it.
* gdbarch.c, gdbarch.h: Regenerate.
* infcmd.c (info_proc_cmd_1): Try gdbarch info_proc callback
before falling back to the target info_proc callback.
* linux-nat.c: Do not include "cli/cli-utils.h".
(linux_nat_info_proc): Remove.
(linux_target_install_ops): No longer install it.
* linux-tdep.c: Include "cli/cli-utils.h" and <ctype.h>.
(read_mapping): New function.
(linux_info_proc): Likewise.
(linux_init_abi): Install it.
* linux-nat.c (linux_nat_close): Call linux_nat_is_async_p and
linux_nat_async directly instead of going through the target
vector.
* target.c (unpush_target): Close target after unpushing it, not
before.
Jan Kratochvil <jan.kratochvil@redhat.com>
* linux-nat.c (add_lwp): Don't call linux_nat_new_thread on the
first LWP.
* amd64-linux-nat.c (update_debug_registers_callback): Instantiate
`lwp->arch_private' if NULL.
(amd64_linux_prepare_to_resume): Do nothing if `lwp->arch_private'
is NULL.
* i386-linux-nat.c (update_debug_registers_callback): Instantiate
`lwp->arch_private' if NULL.
(i386_linux_prepare_to_resume): Do nothing if `lwp->arch_private'
is NULL.
gdb/
* linux-nat.c (linux_nat_filter_event): Remove `options'
parameter, and dead code that used it. If we're handling a
PTRACE_EVENT_EXEC event, and the thread group leader is no longer
in our lwp list, re-add it.
(check_zombie_leaders): New.
(linux_nat_wait_1): Remove `options' and `pid' locals. Always
wait for children with WNOHANG, and always wait for all children.
Don't check for no resumed children upfront. Simplify wait loop.
Check for zombie thread group leaders after handling all wait
statuses. Return TARGET_WAITKIND_NO_RESUMED if there no
unwaited-for children left.
* infrun.c (fetch_inferior_event): Handle TARGET_WAITKIND_NO_RESUMED.
(handle_inferior_event): Handle TARGET_WAITKIND_NO_RESUMED.
(normal_stop): Handle TARGET_WAITKIND_NO_RESUMED.
* target.h (enum target_waitkind) <TARGET_WAITKIND_NO_RESUMED>: New.
gdb/testsuite/
* gdb.threads/no-unwaited-for-left.c: New.
* gdb.threads/no-unwaited-for-left.exp: New.
* gdb.threads/non-ldr-exc-1.c: New.
* gdb.threads/non-ldr-exc-1.exp: New.
* gdb.threads/non-ldr-exc-2.c: New.
* gdb.threads/non-ldr-exc-2.exp: New.
* gdb.threads/non-ldr-exc-3.c: New.
* gdb.threads/non-ldr-exc-3.exp: New.
* gdb.threads/non-ldr-exc-4.c: New.
* gdb.threads/non-ldr-exc-4.exp: New.
gdb/
* linux-nat.c (linux_handle_extended_wait): When handling a clone
event, in non-stop, if not stopping, make sure the new lwp has
last_resume_kind set to resume_continue. Assert that when we're
resuming the new lwp, its last_resume_kind is resume_continue.
* linux-nat.c (linux_handle_extended_wait): Always dump both the
parent and child's pids as soon as we detect a clone event.
Adjust another debug message.
libthread_db when we load libpthread or the main symbol file.
(thread_db_inferior_created): New function.
(_initialize_thread_db): Attach inferior_created observer.
* linux-nat.c (linux_child_post_attach): Remove call to
check_for_thread_db.
(linux_child_post_startup_inferior): Ditto.
* objfiles.h (OBJF_MAINLINE): Define.
* symfile.c (symbol_file_add_with_addrs_or_offsets): Pass it to
allocate_objfile when appropriate.
gdb/
* linux-nat.c (linux_handle_extended_wait): Don't resume the new
new clone lwp if the core asked it to stop. Don't pass on
unexpected signals to the new clone; leave them pending instead.
gdb/
* linux-nat.c (linux_nat_wait_1): Copy the event lwp's
last_resume_kind before clearing it, and use the copy instead to
determine whether to report a SIGSTOP as TARGET_SIGNAL_0. Use
resume_clear_callback in the non-stop path too.
* infrun.c (disable_randomization): New global variable.
(show_disable_randomization): New function.
(set_disable_randomization): Likewise.
(_initialize_infrun): Install set/show disable-randomization
commands.
* linux-nat.c (disable_randomization): Remove.
(show_disable_randomization): Likewise.
(set_disable_randomization): Likewise.
(_initialize_linux_nat): No longer install set/show
disable-randomization commands here.
(linux_nat_supports_disable_randomization): New function.
(linux_nat_add_target): Install it.
* remote.c (PACKET_QDisableRandomization): New enum value.
(remote_protocol_packets): Support QDisableRandomization.
(_initialize_remote): Likewise.
(remote_supports_disable_randomization): New function.
(init_remote_ops): Install it.
(extended_remote_supports_disable_randomization): New function.
(init_extended_remote_ops): Install it.
(extended_remote_disable_randomization): New function.
(extended_remote_create_inferior_1): Call it.
* target.h (struct target_ops): Add to_supports_disable_randomization.
(target_supports_disable_randomization): Add prototype.
* target.c (target_supports_disable_randomization): New function.
(find_default_supports_disable_randomization): Likewise.
(init_dummy_target): Install it.
doc/
* gdb.texinfo (Starting your Program): "set disable-randomization"
is no longer Linux-specific.
(Remote Configuration): Document "set remote
disable-randomization-packet".
(General Query Packets): Document "QDisableRandomization" packet
and add it to "qSupported" list.
gdbserver/
* configure.ac: Check support for personality routine.
* configure: Regenerate.
* config.in: Likewise.
* linux-low.c: Include <sys/personality.h>.
Define ADDR_NO_RANDOMIZE if necessary.
(linux_create_inferior): Disable address space randomization when
forking inferior, if requested.
(linux_supports_disable_randomization): New function.
(linux_target_ops): Install it.
* server.h (disable_randomization): Declare.
* server.c (disable_randomization): New global variable.
(handle_general_set): Handle QDisableRandomization.
(handle_query): Likewise for qSupported.
(main): Support --disable-randomization and --no-disable-randomization
command line arguments.
* target.h (struct target_ops): Add supports_disable_randomization.
(target_supports_disable_randomization): New macro.
* linux-nat.h (enum resume_kind): New.
(struct lwp_info) <last_resume_kind>: New field.
(linux_child_follow_fork): Set last_resume_kind to resume_stop on
the new lwp.
(add_lwp): Set last_resume_kind as resume_continue by default.
(lin_lwp_attach_lwp): Set last_resume_kind as resume_stop.
(resume_lwp): New, factored out from resume_callback. Also check
for pending status in lp->waitstatus.
(resume_callback): Reimplement.
(resume_clear_callback): Set last_resume_kind as resume_stop.
(resume_set_callback): Set last_resume_kind as resume_continue.
(linux_nat_resume, linux_handle_extended_wait): Set
last_resume_kind.
(running_callback): Also check lp->waitstatus for pending events.
(select_singlestep_lwp_callback): Check that lp->last_resume_kind
is resume_step.
(stop_and_resume_callback): Don't re-resume if the core wanted the
lwp stopped. Use resume_lwp instead of resume_callback. Avoid
using an invalidated pointer.
(linux_nat_filter_event): Don't discard SIGSTOPs as delayed
SIGSTOPs if the core wanted the LWP to stop.
(linux_nat_wait_1) Don't consume a pending SIGSTOP if the core
wanted the lwp to stop. If the core wanted the lwp to stop, and
the lwp stopped with a SIGSTOP, report a TARGET_SIGNAL_0 instead
of TARGET_SIGNAL_STOP.
(linux_nat_stop_lwp): Don't synchronously wait for the lwp to stop
here. Instead, signal the lwp, and set the last_resume_kind to
resume_stop.
* linux-nat.c (in_pid_list_p): New.
(linux_record_stopped_pid): Delete.
(lin_lwp_attach_lwp): Check if PTRACE_ATTACH failed because we're
already attached to the LWP. Return an indication if so.
(linux_nat_filter_event): Adjust.
* linux-thread-db.c (attach_thread): Handle lin_lwp_attach_lwp
returning an indication to ignore this thread.
Fix PR 10970, PR 12702.
* linux-nat.c (linux_lwp_is_zombie): New function.
(wait_lwp): Initialize status. New variable prev_mask. Block signals.
Check for linux_lwp_is_zombie. Use WNOHANG and sigsuspend.
gdb/testsuite/
* gdb.threads/leader-exit.c: New file.
* gdb.threads/leader-exit.exp: New file.
add to_pass_signals.
(target_notice_signals): Remove.
(target_pass_signals): Add prototype.
* target.c (update_current_target): Remove to_notice_signals;
mention to_pass_signals.
(target_pass_signals): New function.
(debug_to_notice_signals): Remove.
(setup_target_debug): Do not install debug_to_notice_signals.
* infrun.c (signal_pass): New global.
(resume): Call target_pass_signals.
(handle_inferior_event): Report all signals while stepping over
non-steppable watchpoint. Reset trap_expected to ensure breakpoints
are re-inserted when stepping over a signal handler.
(signal_cache_update): New function.
(signal_stop_update): Call it.
(signal_print_update): Likewise.
(signal_pass_update): Likewise.
(handle_command): Call signal_cache_update and target_pass_signals
instead of target_notice_signals.
(_initialize_infrun): Initialize signal_pass.
* linux-nat.c (pass_mask): New global.
(linux_nat_pass_signals): New function.
(linux_nat_create_inferior): Report all signals initially.
(linux_nat_attach): Likewise.
(linux_nat_resume): Use pass_mask to decide whether to directly
handle an inferior signal.
(linux_nat_wait_1): Likewise.
(linux_nat_add_target): Install to_pass_signals callback.
* nto-procfs.c (notice_signals): Remove.
(procfs_resume): Do not call notice_signals.
(procfs_notice_signals): Remove.
(procfs_pass_signals): New function.
(init_procfs_ops): Install to_pass_signals callback instead of
to_notice_signals callback.
(_initialize_procfs): Report all signals initially.
* procfs.c (procfs_notice_signals): Remove.
(procfs_pass_signals): New function.
(procfs_target): Install to_pass_signals callback instead of
to_notice_signals callback.
(register_gdb_signals): Remove.
(procfs_debug_inferior): Report all signals initially.
(procfs_init_inferior): Remove redundant register_gdb_signals call.
* remote.c (remote_pass_signals): Add numsigs and pass_signals
parameters; use them instead of calling signal_..._state routines.
(remote_notice_signals): Remove.
(remote_start_remote): Report all signals initially.
(remote_resume): Do not call remote_pass_signals.
(_initialize_remote): Install to_pass_signals callback instead of
to_notice_signals callback.
* linux-nat.c: Move common macros to ...
Include linux-ptrace.h.
* common/linux-ptrace.h: ... here. New.
gdb/gdbserver/
* linux-low.c: Move common macros to linux-ptrace.h.
Include linux-ptrace.h.
* Makefile.in (linux_ptrace_h): New.
(linux-low.o): Depends on linux-ptrace.h.
Convert hardware watchpoints to use breakpoint_ops.
gdb/
* breakpoint.h (breakpoint_ops) <insert>: Rename to...
<insert_location>: ... this. Return int instead of void.
Accept pointer to struct bp_location instead of pointer to
struct breakpoint. Adapt all implementations.
(breakpoint_ops) <remove>: Rename to...
<remove_location>: ... this. Accept pointer to struct bp_location
instead of pointer to struct breakpoint. Adapt all implementations.
* breakpoint.c (insert_catchpoint): Delete function.
(insert_bp_location): Call the watchpoint or catchpoint's
breakpoint_ops.insert method.
(remove_breakpoint_1): Call the watchpoint or catchpoint's
breakpoint_ops.remove method.
(insert_watchpoint, remove_watchpoint): New functions.
(watchpoint_breakpoint_ops): New structure.
(watch_command_1): Initialize the OPS field.
* inf-child.c (inf_child_insert_fork_catchpoint)
(inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
(inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
(inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
Delete functions.
(inf_child_target): Remove initialization of to_insert_fork_catchpoint,
to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
to_remove_exec_catchpoint and to_set_syscall_catchpoint.
* target.c (update_current_target): Change default implementation of
to_insert_fork_catchpoint, to_remove_fork_catchpoint,
to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
to_insert_exec_catchpoint, to_remove_exec_catchpoint and
to_set_syscall_catchpoint to return_one.
(debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
(debug_to_insert_exec_catchpoint): Report return value.
* target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
(to_insert_exec_catchpoint): Change declaration to return int instead
of void.
gdb/testsuite/
* gdb.base/foll-exec.exp: Adapt to new error string when the catchpoint
type is not supported.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
Rename and move inferior_thread_state and inferior_status.
* gdbthread.h (struct thread_control_state): New struct, move fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step and stop_bpstat here from struct thread_info.
(struct thread_suspend_state): New struct, move field stop_signal here
from struct thread_info.
(struct thread_info): Move the fields above from this struct.
* inferior.h: Move the inferior_thread_state and inferior_status
declarations comment to their definitions at infrun.c.
(struct inferior_control_state): New struct, move field stop_soon from
struct inferior here.
(struct inferior_suspend_state): New empty struct.
(struct inferior): New fields control and suspend. Move out field
stop_soon.
* infrun.c (struct inferior_thread_state): Rename to ...
(infcall_suspend_state): ... here. Replace field stop_signal by
fields thread_suspend and inferior_suspend.
(save_inferior_thread_state): Rename to ...
(save_infcall_suspend_state): ... here. New variable inf. Update the
code for new fields.
(restore_inferior_thread_state): Rename to ...
(restore_infcall_suspend_state): ... here. New variable inf. Update
the code for new fields.
(do_restore_inferior_thread_state_cleanup): Rename to ...
(do_restore_infcall_suspend_state_cleanup): ... here.
(make_cleanup_restore_inferior_thread_state): Rename to ...
(make_cleanup_restore_infcall_suspend_state): ... here.
(discard_inferior_thread_state): Rename to ...
(discard_infcall_suspend_state): ... here.
(get_inferior_thread_state_regcache): Rename to ...
(get_infcall_suspend_state_regcache): ... here.
(struct inferior_status): Rename to ...
(struct infcall_control_state): ... here. Replace fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step, stop_bpstat and stop_soon by fields thread_control and
inferior_control.
(save_inferior_status): Rename to ...
(save_infcall_control_state): ... here. Update the code for new
fields.
(restore_inferior_status): Rename to ...
(restore_infcall_control_state): ... here. Update the code for new
fields.
(do_restore_inferior_status_cleanup): Rename to ...
(do_restore_infcall_control_state_cleanup): ... here.
(make_cleanup_restore_inferior_status): Rename to ...
(make_cleanup_restore_infcall_control_state): ... here.
(discard_inferior_status): Rename to ...
(discard_infcall_control_state): ... here.
* alpha-tdep.c, breakpoint.c, dummy-frame.c, dummy-frame.h,
exceptions.c, fbsd-nat.c, gdbthread.h, infcall.c, infcmd.c,
inferior.c, inferior.h, infrun.c, linux-nat.c, mi/mi-interp.c,
mips-tdep.c, procfs.c, solib-irix.c, solib-osf.c, solib-spu.c,
solib-sunos.c, solib-svr4.c, thread.c, windows-nat.c: Update all the
references to the moved fields and renamed functions.
Revert:
2010-10-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <pedro@codesourcery.com>
* gdbthread.h (currently_stepping): New declaration.
* infrun.c (currently_stepping): Remove the forward declaration.
(currently_stepping): Make it global.
* linux-nat.c (resume_callback) <lp->stopped && lp->status == 0>: New
variables tp and step, initialized them. Pass STEP to to_resume.
Print also possibly "PTRACE_SINGLESTEP" if STEP. Initialize LP->STEP.
* remote.c (currently_stepping_callback): New.
(remote_vcont_resume)
<ptid_equal (ptid, minus_one_ptid) || ptid_is_pid (ptid)>:
New variable tp. Call currently_stepping_callback and step such
thread.
gdb/testsuite/
Revert:
2010-10-17 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.threads/sigstep-threads.exp: New file.
* gdb.threads/sigstep-threads.c: New file.
* corelow.c (core_open): Use target_signal_from_host if CORE_GDBARCH
is NULL.
* fork-child.c (startup_inferior) <resume_signal>: Use enum
target_signal type.
* linux-nat.c (linux_nat_resume): Use target_signal_to_host before
calling strsignal. Use enum target_signal type for saved_signo.
(linux_handle_extended_wait) <signo>: Use enum target_signal type.
(linux_nat_wait_1): Use enum target_signal type for signo. Use
target_signal_to_host before calling strsignal.
* remote-m32r-sdi.c (m32r_wait, m32r_detach): Replace 0 by
TARGET_SIGNAL_0.
gdb/gdbserver/
* target.c (mywait) <TARGET_WAITKIND_EXITED>: Fix to use INTEGER.
