an address to 'w'. Make it 'g' or 'h', depending on TARGET_PTR_BIT.
* defs.h: Just typedef CORE_ADDR to bfd_vma. Include bfd.h.
If BFD64, make a LONGEST a BFD_HOST_64_BIT.
* defs.h (longest_to_int): Don't depend on CC_HAS_LONG_LONG; instead
always just check against INT_MIN and INT_MAX (this also fixes things
if sizeof (long) > sizeof (int), e.g. Alpha).
* config/pa/tm-hppa.h, config/i386/sun386.h, config/rs6000/tm-rs6000.h:
Don't define LONGEST or BUILTIN_TYPE_LONGEST.
* gdbtypes.h: Remove BUILTIN_TYPE_LONGEST and
BUILTIN_TYPE_UNSIGNED_LONGEST.
* language.h, c-lang.c, ch-lang.c, m2-lang.c: Remove longest_int
and longest_unsigned_int.
* value.h (struct value): Just align to LONGEST, rather than worrying
about CC_HAS_LONG_LONG.
* valarith.c (value_binop, _initialize_valarith): Figure out type
ourself based on sizeof (LONGEST) rather than relying on
BUILTIN_TYPE_LONGEST. The point is that we don't depend on
CC_HAS_LONG_LONG anymore.
* valprint.c (val_print_type_code_int): Just call
extract_unsigned_integer directly, rather than going through
unpack_long.
* printcmd.c (decode_format): Remove code which would sometimes
change 'g' size to 'w' for integers. print_scalar_formatted handles
printing huge integers well enough, thank you.
init_extra_frame_info and put it in new function mips_find_saved_regs.
(READ_FRAME_REG): Remove macro and replace uses with the expansion.
* mips-tdep.c, config/mips/tm-mips.h: When examining ->saved_regs,
check if it is NULL and call mips_find_saved_regs if so.
reserved fields to hold a stub unwind entry type. Fix typo.
(stub_unwind_entry): New structure for raw stub unwind entries.
(stub_unwind_types): The types of stubs we may encounter.
(UNWIND_ENTRY_SIZE, STUB_UNWIND_ENTRY_SIZE): New defines.
* hppa-tdep.c (rp_saved): Use additional information provided
by linker stub unwind descriptors.
(frameless_function_invocation): Likewise.
(frame_chain_valid): Likewise.
* paread.c (compare_unwind_entries): New function for sorting
unwind table entries.
(read_unwind_info): Rewrite to remove dependency on host endianness.
Read in data from the $UNWIND_END$ subspace which contains linker
stub unwind descriptors. Merge that data into the basic unwind
table.
(pop_frame): Restore PC2 and LR0 from dummy frames.
(push_dummy_frame): Save PC2 and LR0 into dummy frames.
(setup_arbitrary_frame): Handle 3 args and set up real frames.
* config/a29k/tm-a29k.h (FRAME_NUM_ARGS): Update comments.
(DUMMY_FRAME_RSIZE): Add 2 longwords for PC2 and LR0.
(SETUP_ARBITRARY_FRAME): Define.
struct target_waitstatus. Change status argument to target_wait to
be struct target_waitstatus * instead of int *.
* target.h, infrun.c, all targets: Change type of signal arguments
to resume(), proceed(), and target_resume() from int to enum
target_signal.
* All targets (*_wait, *_resume): Change accordingly.
* infcmd.c (program_info, signal_command), throughout infrun.c,
* fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
* convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
signal code stuff right with the new signals would be non-trivial).
* inferior.h (stop_signal): Make it enum target_signal not int.
* target.c, target.h (target_signal_to_string, target_signal_to_name,
target_signal_from_name): New functions.
* inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
store_waitstatus): New functions.
* procfs.c (procfs_notice_signals): Use them.
* i960-tdep.c (i960_fault_to_signal): New function, to replace
print_fault.
* config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
The old way (using #undef in tm.h) was ugly and asking for
trouble, because it makes it possible for some file to use the
wrong definition. Move definition of HOST_CHAR_BIT after definition
of TARGET_CHAR_BIT.
* config/alpha/tm-alpha.h, config/h8300/tm-h8300.h,
config/h8500/tm-h8500.h, config/z8k/tm-z8k.h: Don't undef TARGET_*_BIT
before defining them.
* config/mips/idtl.mt: Use tm-idtl.h instead of tm-mips.h.
* config/mipos/tm-idt.h, config/mips/tm-idtl.h: New files; use
different BREAKPOINT value for IDT.
* configure.in (mips-sgi-irix5*): New host and target. Use irix5
for both.
* config/mips/irix5.mh, config/mips/irix5.mt,
config/mips/xm-irix5.h, config/mips/nm-irix5.h,
config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support.
* mdebugread.c: New file, split out of mipsread.c. Added
elfmdebug_build_psymtabs routine. Added some checks on external
symbols. Changed code to keep ecoff_debug_info and
ecoff_debug_swap structs in the psymtab and in global pointers
rather than retrieving them from the bfd. Also changed to keep
the pending list with the psymtab rather than the objfile (each
psymtab for a single objfile points to the same pending list).
* mipsread.c: Bulk of file moved into mdebugread.c, leaving just
the sym_fns.
* Makefile.in (SFILES): Added mdebugread.c.
(OBS): Added mdebugread.o.
(mdebugread.o): New target.
* symfile.h: Declare mdebug_build_psymtabs and
elfmdebug_build_psymtabs.
* elfread.c (struct elfinfo): Added mdebugsect field.
(elf_locate_sections): Remember location of .mdebug section.
(elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug
section.
* infrun.c (AT_FUNCTION_START): Set to 0 if not already defined.
(wait_for_inferior): Use AT_FUNCTION_START if it is defined to see
if PC is at the start of a function.
* mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and
give it a default definition.
(mips_skip_prologue): Skip instructions which initialize $gp
register.
(in_sigtramp): New procedure, moved in from mipsread.c.
* config/mips/tm-mips.h: Declare in_sigtramp.
coredep.o to this list.
* gdb/m88k-nat.c (m88k_register_u_addr): Avoid error when passed
the number for an M88110 extended register by just returning the
address of r0.
* m68k-tdep.c (m68k_saved_pc_after_call): Get rid of
GDB_TARGET_IS_SUN3. Use more general SYSCALL_TRAP macro.
* config/m68k/m68klynx.mh (NATDEPFILES): Remove exec.o (it's
already in TDEPFILES).
* config/m68k/tm-m68k.h (SAVED_PC_AFTER_CALL): Use
m68k_saved_pc_after_call.
* Remove all Sun3 specific stuff.
* (FIX_CALL_DUMMY): Cast arg to bfd_putb32 to unsigned char *.
* config/m68k/tm-m68klynx.h: Define SYSCALL_TRAP as trap #10.
Disable REMOTE_BREAKPOINT mechanism.
* config/m68k/tm-sun3.h: Get rid of GDB_TARGET_IS_SUN3.
* Protect from multiple includion.
* Move Sun3 specific stuff from tm-m68k.h to here.
* Define SYSCALL_TRAP as trap #0.
* Remove def of SAVED_PC_AFTER_CALL (now in tm-m68k.h).
* gdbserver/low-lynx.c: Redo all register store/fetch stuff to
make it portable for 386 and 68k.
* Makefile.in (udi2go32.o): add rule to build this file
* 29k-share/udi/udi2go32.c: new file
* config/a29k/a29k-udi.mt: add udi2go32.o
* 29k-share/udi/{udr.c, udip2soc.c}: #ifdef out the entire file
if __GO32__ is defined. What a hack.
hppa-tdep.c (pa_print_fp_reg), infcmd.c (do_registers_info),
valops.c (value_assign): Use REGISTER_CONVERT_TO_* only if
REGISTER_CONVERTIBLE is defined, otherwise just copy the content.
Pass desired type to REGISTER_CONVERT_TO_*.
* config/m68k/tm-m68k.h, config/i960/tm-i960.h (REGISTER_CONVERT_*):
Pass length of desired type to store/extract_floating.
* config/i386/tm-arm.h, config/i386/tm-i386aix.h,
config/i386/tm-sun386.h, config/i386/tm-symmetry.h,
config/m88k/tm-m88k.h config/rs6000/tm-rs6000.h (REGISTER_CONVERT_*):
Use extract_floating and store_floating with length of desired type.
* config/m68k/tm-news.h (STORE,EXTRACT_RETURN_VALUE): Add type
parameter to REGISTER_CONVERT_*.
* config/a29k/tm-a29k.h, config/convex/tm-convex.h,
config/gould/tm-np1.h, config/gould/tm-pn.h, config/h8300/tm-h8300.h,
config/h8500/tm-h8500.h, config/i386/tm-i386v.h,
config/mips/tm-mips.h, config/ns32k/tm-merlin.h,
config/ns32k/tm-umax.h, config/pa/tm-hppa.h, config/pyr/tm-pyr.h,
config/sh/tm-sh.h, config/sparc/tm-sparc.h, config/tahoe/tm-tahoe.h,
config/vax/tm-vax.h, config/z8k/tm-z8k.h (REGISTER_CONVERTIBLE,
REGISTER_CONVERT_TO_RAW, REGISTER_CONVERT_TO_VIRTUAL): Remove
versions for which REGISTER_CONVERTIBLE is always false.
* z8k-tdep.c (register_convert_to_virtual, register_convert_to_raw):
Remove, no longer used.
* alpha-tdep.c (alpha_register_convert_to_raw,
alpha_register_convert_to_virtual): New routines to handle
the different raw formats in alpha floating point registers.
* config/alpha/tm-alpha.h (REGISTER_CONVERTIBLE,
REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Use them.
* Move SWAP_TARGET_AND_HOST from defs.h to findvar.c because it is
now used only by extract_floating and store_floating.
* valprint.c (print_floating): Use unsigned arithmetic. Use
extract_unsigned_integer instead of SWAP_TARGET_AND_HOST.
Change sizeof (float) to 4 and sizeof (double) to 8 (those are always
the relevant sizes for this code, which is in #ifdef IEEE_FLOAT).
* values.c (unpack_long, unpack_double, value_from_double),
valarith.c (value_binop), stabsread.c (define_symbol):
Use extract_floating and store_floating instead of
SWAP_TARGET_AND_HOST.
* config/m68k/tm-m68k.h, config/i960/tm-i960.h (REGISTER_CONVERT_*):
Use extract_floating and store_floating.
* config/m88k/tm-m88k.h: Add comments (it should be doing the same).
* i386-tdep.c (i386_extract_return_value),
* remote-nindy.c (nindy_store_registers): Use store_floating.
config/mips/{mipsm3.mt,mipsm3.mh},
config/ns32k/{ns32km3.mt,ns32km3.mh}: Use correct names for TM_FILE
and XM_FILE. Replace host files *mach3-xdep.o with native
files *m3-nat.o. Replace host file os-mach3.o with native
file m3-nat.o.
* dst.h, dstread.c, config/m68k/{apollo68b.mt,tm-apollo68b.h}:
New files.
* config/m68k/nm-apollo68b.h: Add more defines.
* configure.in: Recognize apollo target, not just host.
remote-mon.c (monitor_create_inferior), remote-nindy.c
(nindy_create_inferior), remote-st.c (st2000_create_inferior),
remote-vx.c (vx_create_inferior): Remove CREATE_INFERIOR_HOOK; it
is replaced by init_trace_fun.
* config/convex/xm-convex.h, convex-xdep.c: Add comments explaining
how to do without CREATE_INFERIOR_HOOK for whoever fixes the Convex
port.
* Makefile.in: Add Mach files to ALLDEPFILES, etc.
* m3-nat.c: Clean up more hair--message(), cprocs.
* configure.in: Recognize Mach targets and hosts.
* config/ns32k/tm-umax.h: Add some #ifndef's so tm-ns32km3.h can
include this file.
* Mach headers in config/*/tm-*.h: Fix includes to match correct
locations of files.
calling vprintf, just make the appropriate calls to printf.
* printcmd.c, config/pa/xm-pa.h, config/mips/xm-makeva.h,
config/alpha/xm-alpha.h, config/m88k/xm-m88k.h: Remove all
traces of makeva*. My apologies to everyone (including me!)
who spent so much time getting it to work on various machines,
but look at the bright side, at least you won't have to do it
again in the future.
* printcmd.c (printf_command): Make a cleanup for val_args (fixes
a memory leak).
* config/i386/i386mach.c: Explain this is for the old (probably
non-functional and/or obsolete) Mach stuff.
* m3-nat.c, config/nm-m3.h,
i386m3-nat.c, mipsm3-nat.c, ns32km3-nat.c,
config/i386/{i386m3.mh,i386m3.mt,tm-i386m3.h,xm-i386m3.h},
config/i386/{i386mk.mh,i386mk.mt,tm-i386mk.h,xm-i386mk.h},
config/mips/{mipsm3.mh,mipsm3.mt,tm-mipsm3.h,xm-mipsm3.h},
config/ns32k/{ns32km3.mh,ns32km3.mt,tm-ns32km3.h,xm-ns32km3.h}:
New files.
understand what it is trying to do, but I suspect it's not doing
it.
* config/ns32k/merlin.mh: Add comment about M_INSTALL.
* config/m88k/{delta88.mh,delta88v4.mh}: Remove M_INSTALL and
M_UNINSTALL; it tries to install a non-existent file gdb.z.
* Makefile.in: Remove M_INSTALL stuff; the above were the only uses.
about SHIFT_INST_REGS.
* exec.c (exec_file_command): Set text_end based on all code readonly
sections, not just ".text".
* defs.h, infcmd.c, config/z8k/tm-z8k.h, config/m88k/tm-m88k.h,
config/sh/tm-sh.h, config/h8300/tm-h8300.h, config/h8500/tm-h8500.h,
z8k-tdep.c: Remove all references to ADDR_BITS_SET.
* config/m88k/tm-m88k.h: Define TARGET_WRITE_PC.
* config/m88k/tm-m88k.h: Add definitions for calling functions.
(TARDIRS): Add gdbserver.
* exec.c (print_section_info): Print entry point.
* i386lynx-nat.c (i386lynx_saved_pc_after_call): Move into
i386lynx-tdep.c. Add core file support.
* i386lynx-tdep.c: New module for Lynx/386 target dependant code.
* maint.c: Add `maint info sections' command to print info about all
sections that BFD knows about for exec and core files.
* sparc-tdep.c (sparc_push_dummy_frame): Update stack pointer
before putting frame on the stack. Consolidate writes to reduce
traffic for remote debugging.
* config/i386/i386lynx.mh (NATDEPFILES): Remove exec.o.
* config/i386/i386lynx.mt (TDEPFILES): Add exec.o, i386lynx-tdep.o.
* config/i386/nm-i386lynx.h: Add target_pid_to_str().
* config/i386/tm-i386lynx.h: Remove target_pid_to_str().
* sparclite/Makefile.in: Add deps to keep Sun make happy.
ieee-float.h. expanded to cope with m88110 extended registers.
(R0_REGNUM, XFP_REGNUM, X0_REGNUM): new macros.
(SHIFT_INST_REGS): becomes a real macro.
Some of the following is in #ifdef CALL_DUMMY_BREAKPOINT_OFFSET.
* breakpoint.h (enum bptype): Add bp_call_dummy.
(struct bpstat_what): Add call_dummy field.
* infrun.c (wait_for_inferior): Deal with it.
* breakpoint.c (bpstat_what): Deal with call dummy breakpoint.
* infcmd.c (run_stack_dummy): Set the call dummy breakpoint.
* config/sparc/tm-sparc.h: Define CALL_DUMMY_BREAKPOINT_OFFSET.
* remote-sim.c: Add remote debug feature. Rename stuff to distinguish
interface to simulator from gdb-specific stuff. Other changes.
start-sanitize-v9
* remote-sp64sim.c: Renamed to remote-sim.c.
Use sr_get_debug instead of our own sim_verbose/simif_snoop.
Use gnutarget in call to bfd_openr.
Rename simif_* to gdbsim_*.
* config/sparc/sp64sim.mt: Change remote-sp64sim.c to remote-sim.c.
end-sanitize-v9
to tm-a29k.h and a29k-tdep.c and make it an enum.
* a29k-tdep.c (a29k_get_processor_type): New function. Fix many
aspects of how we detected the processor type.
* remote-udi.c, remote-adapt.c, remote-mm.c (*_open): Call it
rather than figuring out the type ourselves.
* exec.c (ignore): Return 0.
* stack.c (return_command): Fetch lazy value directly, not via
VALUE_CONTENTS, to avoid "value computed is not used".
* inflow.c (new_tty): Move osigttou inside #if.
* remote.c (remote_fetch_registers): If remote reply is short, just
note that fact and keep going (reading extra registers as all bits 0).
(remote_store_registers): Send number of registers that were found
by remote_fetch_registers.
* m68k-tdep.c, config/m68k/tm-m68k.h, config/m68k/tm-*.h: Remove
HAVE_68881. Define CANNOT_STORE_REGISTER if ptrace() can't write
floating registers.
* config/m68k/{tm-m68k-nofp.h,m68k-nofp.mt,tm-m68k-fp.h,m68k-fp.mt}:
Remove, replaced by {tm-m68k-em.h,m68k-em.mt}.
* Makefile.in, configure.in: Change accordingly.
Include sys/types.h regardless of USG.
* configure.in: Fix typo (delta88r4 -> delta88v4).
* config/m88k/xm-delta88.h: Don't include sys/siginfo.h. It was
to make this work on SVR4 before SVR4 had its own configuration,
and it breaks SVR3.
* config/m88k/m88k.mh: Use xm-dgux.h.
* config/m88k/xm-m88k.h: New file, with HOST_BYTE_ORDER,
MAKEVA_END and MAKEVA_ARG.
* config/m88k/xm-*.h: Include m88k/xm-m88k.h.
* printcmd.c: Remove __INT_VARARGS_H code; now in xm-m88k.h.
* config/m88k/xm-m88k.h: New file, with HOST_BYTE_ORDER,
MAKEVA_END and MAKEVA_ARG.
* config/m88k/xm-*.h: Include m88k/xm-m88k.h.
* printcmd.c: Remove __INT_VARARGS_H code; now in xm-m88k.h.
it conditionalized on 4.3 vs. 4.4.
* config/m68k/nm-hp300bsd.h: Move REGISTER_U_ADDR out of 4.3 and
4.4 sections; it was identical and now works for 4.4.
non-existent files nm-delta.h, etc.
* config/m68k/tm-delta68.h: Define CANNOT_STORE_REGISTER.
* delta68-nat.c: Add "[0]" in offsetof argument.
* delta68-nat.c (_initialize_kernel_u_addr): Don't try to set up
nl with initializer, just assign to it. Check n_scnum field on
return.
(FP_REGNUM): define in terms of SP_REGNUM
rather than by absolute number. Also clearly comment that this
is a convenient lie in order to decrease future confusion.
(ACTUAL_FP_REGNUM): new macro for FP.
(FRAME_CHAIN_VALID): removed. Standard default works fine.
* m88k-tdep.c (frame_chain_valid): redundant, so removed.
(NEXT_PROLOGUE_INSN): removed unused fourth arg, fixed all
callers.
(read_next_frame_reg): declare static.
(examine_prologue): removed unused variabel insn2, rename insn1
to insn, rewrote comment about finding fp, sp, etc. set frame_fp
based on ACTUAL_FP_REGNUM rather than FP_REGNUM which is
actually a scammed alias for SP_REGNUM on m88k.
GDBSERVER_DEPFILES. Also remove much (but not all that could be
removed) crud inherited from gdb Makefile.in.
* config/i386/i386lynx.mh, config/sparc/sun4os4.mh: Define GDBSERVER_*.
* gdbserver/README: Say it works on Sun and change configuration
instructions slightly.
(bug_ops, monitor_desc): now static.
(monitor_desc): in several places, check and/or set to NULL.
* remote-hms.c (hms_files_info): Add the appropriate items where
missing in the printf call.
* remote-bug.c: new file for m88k bug support.
* config/m88k/m88k.mt (TDEPFILES): added remote-bug.o.
* nindy-share/*, remote-nindy.c: Extensive hacking to make it
conform to GDB conventions like using memcpy not bcopy, serial.h,
etc. This is to make it host on Solaris, AIX, etc.
* Makefile.in: Reflect removed nindy-share files.
* config/i960/nindy960.mt (TDEPFILES): Remove ttybreak.o.
<memory.h>.
Include <malloc.h> rather than declaring malloc functions ourself.
* ser-unix.c (set_tty_state): Don't ignore errors setting process
group.
* inflow.c (terminal_inferior): If attach_flag set, ignore errors
from set_tty_state.
command. Now we use unwind info by default if we can find it.
* config/sparc: Move VARIABLES_INSIDE_BLOCK and SUN_FIXED_LBRAC_BUG
to tm-sparc.h so they are shared between Solaris and SunOS4.
* dbxread.c (process_one_symbol): Deal with SunOS4 acc N_STSYM and
N_GSYM functions.
(can't include it in nm-*.h file because it causes conflicts with
a.out symbol definitions).
* hp300ux-nat.c (fetch_core_registers): Commented out; obsolete.
* config/m68k/hp300hpux.mh (NATDEPFILES): Added coredep.o and
corelow.o.
* config/m68k/nm-hp300hpux.h (NEED_SYS_CORE_H): Defined.
(REGISTER_U_ADDR): Defined.
* config/m68k/xm-hp300hpux.h (HAVE_TERMIOS): Define instead of
HAVE_TERMIO.
* config/pa/xm-hppah.h: Likewise.
but not the others.
* symm-tdep.c: Remove exec_file_command.
[_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions.
A few miscellaneous cleanups.
* symm-nat.c: Renamed from symm-xdep.c.
* All symmetry dependent files: Many changes.
but not the others.
* symm-tdep.c: Remove exec_file_command.
[_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions.
A few miscellaneous cleanups.
* symm-nat.c: Renamed from symm-xdep.c.
* All symmetry dependent files: Many changes.
Use read_memory_nobpt.
(is_delayed, mips_in_lenient_prologue): New functions.
(init_extra_frame_info): If in the prologue, don't use saved registers.
* config/mips/tm-mips.h: Declare mips_skip_prologue.
* printcmd.c (makeva_list): Use MAKEVA_EXTRA_INFO to define
machine dependent fields in the makeva_list structure.
(makeva_size): Allocate extra space to handle gaps made by
alignment restrictions.
* config/pa/xm-pa.h (MAKEVA_EXTRA_INFO): Define.
(MAKEVA_START): Initialize arglist_address field.
(MAKEVA_ARG): Always store arguments on natural alignment
boundaries. Set arglist_address to the address right after
the args.
(MAKEVA_END): Simply return the value stored in arglist_address.
* stabsread.c (define_symbol): Make the caddr_t hack apply to `function
returning foo' as well as `pointer to foo'.
* remote.c [REMOTE_BREAKPOINT]: Use for breakpoint insn if defined.
* config/m68k/tm-m68k.h: Define it.
* mem-break.c, breakpoint.c: Improve comments.
Tue Jul 13 13:35:31 1993 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
* config/m68k/tm-dpx2.h: Replace "tm-68k.h" with "m68k/tm-m68k.h".
* config/m68k/xm-dpx2.h: Define HAVE_TERMIOS not HAVE_TERMIO.
(REGISTER_RAW_SIZE): Ditto
(REGISTER_VIRTUAL_TYPE): Use builtin_type_unsigned_long for regs on the h8/300h
(ints may still be 16 bits).
(EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE, EXTRACT_STRUCT_VALUE_ADDRESS):
Add FIXME's for h8/300h. Some thought needed here.
config/gould/tmp-{pn,np1}.h,
config/{sparc/tm-sparc.h,pyr/tm-pyr.h,vax/tm-vax.h}: Remove field
next_frame from struct frame_info. It has no purpose beyond
->next->frame and is an artifact from GDB 2.8.
* signals.h: Don't undefine signals anymore.
* main.c: Use job_control from serial.h.
* fork-child.c (fork_inferior): Use gdb_setpgid.
* serial.h, ser-unix.c, ser-go32.c: Provide gdb_setpgid.
* utils.c (quit): Use current_target->to_terminal_ours to figure
out whether we care about lack of job control, rather than __GO32__.
* utils.c: Include serial.h not terminal.h
(quit): Use job_control not TIOCGPGRP.
* terminal.h: Don't undefine TIOCGPGRP.
* serial.h, ser-unix.c, ser-go32.c, ser-tcp.c: Add SERIAL_FLUSH_OUTPUT.
* utils.c (quit): Use it.
* serial.h: Add SERIAL_UN_FDOPEN.
* utils.c (quit): Use it.
* ser-unix.c: Add process group to ttystate.
[HAVE_SGTTY]: Add tchars, ltchars, and lmode to ttystate.
* inflow.c: Include serial.h not terminal.h.
Use serial.h stuff to replace most of the maze of #ifdef's.
* inflow.c, main.c, inferior.h: make gdb_has_a_terminal a function.
* serial.h: Document SERIAL_SET_TTY_STATE as being immediate.
* ser-unix.c: Use TIOCSETN not TIOCSETP so it is true.
* serial.h, ser-unix.c, ser-go32.c, ser-tcp.c:
Add SERIAL_PRINT_TTY_STATE, SERIAL_NOFLUSH_SET_TTY_STATE, and
SERIAL_SET_PROCESS_GROUP.
* inflow.c: Use them.
* config/xm-svr4.h, config/rs6000/xm-rs6000.h, config/sparc/sun4os4.h:
Define HAVE_TERMIOS.
* Various: Remove all use of TIOC*_BROKEN.
with system headers.
* printcmd.c (printf_command): Cast second arg to vprintf to PTR.
Use VPRINTF macro if defined.
* config/m88k/xm-delta88.h: Define VPRINTF. Include <sys/siginfo.h>.
Define TIOC{GETC,GLTC}_BROKEN.
* m88k-nat.c: Uncomment include of <sys/ptrace.h>.
* main.c: Rename initialize_{main,cmd_lists,history} to init_* to
make things easier on munch (apparently this matters on
the delta88 with svr3).
host.
* sh-tdep.c (frame_find_saved_regs): Use NUM_REGS rather than hard
wired (and wrong) constant.
* values.c (unpack_long): Add case to unpack when target object is
sizeof(int).
* config/sh/tm-sh.h (REGISTER_NAMES): Know about the news ones the
simulator defines.
