This patch makes the execution control code use largely the same
mechanisms in both sync- and async-capable targets. This means using
continuations and use the event loop to react to target events on sync
targets as well. The trick is to immediately mark infrun's event loop
source after resume instead of calling wait_for_inferior. Then
fetch_inferior_event is adjusted to do a blocking wait on sync
targets.
Tested on x86_64 Fedora 20, native and gdbserver, with and without
"maint set target-async off".
gdb/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* breakpoint.c (bpstat_do_actions_1, until_break_command): Don't
check whether the target can async.
* inf-loop.c (inferior_event_handler): Only call target_async if
the target can async.
* infcall.c: Include top.h and interps.h.
(run_inferior_call): For the interpreter to sync mode while
running the infcall. Call wait_sync_command_done instead of
wait_for_inferior plus normal_stop.
* infcmd.c (prepare_execution_command): Don't check whether the
target can async when running in the foreground.
(step_1): Delete synchronous case handling.
(step_once): Always install a continuation, even in sync mode.
(until_next_command, finish_forward): Don't check whether the
target can async.
(attach_command_post_wait, notice_new_inferior): Always install a
continuation, even in sync mode.
* infrun.c (mark_infrun_async_event_handler): New function.
(proceed): In sync mode, mark infrun's event source instead of
waiting for events here.
(fetch_inferior_event): If the target can't async, do a blocking
wait.
(prepare_to_wait): In sync mode, mark infrun's event source.
(infrun_async_inferior_event_handler): No longer bail out if the
target can't async.
* infrun.h (mark_infrun_async_event_handler): New declaration.
* linux-nat.c (linux_nat_wait_1): Remove calls to
set_sigint_trap/clear_sigint_trap.
(linux_nat_terminal_inferior): No longer check whether the target
can async.
* mi/mi-interp.c (mi_on_sync_execution_done): Update and simplify
comment.
(mi_execute_command_input_handler): No longer check whether the
target is async. Update and simplify comment.
* target.c (default_target_wait): New function.
* target.h (struct target_ops) <to_wait>: Now defaults to
default_target_wait.
(default_target_wait): Declare.
* top.c (wait_sync_command_done): New function, factored out from
...
(maybe_wait_sync_command_done): ... this.
* top.h (wait_sync_command_done): Declare.
* target-delegates.c: Regenerate.
This patch fixes the following bug in TUI:
(gdb) break foo
No symbol table is loaded. Use the "file" command.
Make breakpoint pending on future shared library load? (y or [n]) <ENTER>
By submitting an empty command line to a secondary prompt, the line
corresponding to the secondary prompt is undesirably cleared and
overwritten. Outside of a secondary prompt, clearing the prompt line
after submitting an empty command line is intended behavior which
complements GDB's repeat-command shorthand. But inside a secondary
prompt, this behavior is undesired since the shorthand is not applicable
in that case. We should retain the secondary-prompt line even when it's
given no input.
This patch makes sure that a prompt that was given an empty command line
is cleared and overwritten only if it's not a secondary prompt. To
acheive this, a new predicate is defined which informs us whether the
current input handler is a secondary prompt.
gdb/ChangeLog:
* top.h (gdb_in_secondary_prompt_p): Declare.
* top.c (gdb_secondary_prompt_depth): Define.
(gdb_in_secondary_prompt_p): Define.
(gdb_readline_wrapper_cleanup): Decrement
gdb_secondary_prompt_depth.
(gdb_readline_wrapper): Increment gdb_secondary_prompt_depth.
* tui/tui-io.c (tui_getc): Don't clear the prompt line if we
are in a secondary prompt.
This patch makes readline append new history lines to the GDB history
file on exit instead of overwriting the entire history file on exit.
This change allows us to run multiple simultaneous GDB sessions without
having each session overwrite the added history of each other session on
exit.
Care must be taken to ensure that the history file doesn't get corrupted
when multiple GDB processes are trying to simultaneously append to and
then truncate it. Safety is achieved in such a situation by using an
intermediate local history file to mutually exclude multiple processes
from simultaneously performing write operations on the global history
file.
gdb/ChangeLog:
* top.h (gdb_add_history): Declare.
* top.c (command_count): New variable.
(gdb_add_history): New function.
(gdb_safe_append_history): New static function.
(quit_force): Call it.
(command_line_input): Use gdb_add_history instead of
add_history.
* event-top.c (command_line_handler): Likewise.
Doing:
gdb --pid=PID -ex run
Results in GDB getting a SIGTTIN, and thus ending stopped. That's
usually indicative of a missing target_terminal_ours call.
E.g., from the PR:
$ sleep 1h & p=$!; sleep 0.1; gdb -batch sleep $p -ex run
[1] 28263
[1] Killed sleep 1h
[2]+ Stopped gdb -batch sleep $p -ex run
The workaround is doing:
gdb -ex "attach $PID" -ex "run"
instead of
gdb [-p] $PID -ex "run"
With the former, gdb waits for the attach command to complete before
moving on to the "run" command, because the interpreter is in sync
mode at this point, within execute_command. But for the latter,
attach_command is called directly from captured_main, and thus misses
that waiting. IOW, "run" is running before the attach continuation
has run, before the program stops and attach completes. The broken
terminal settings are just one symptom of that. Any command that
queries or requires input results in the same.
The fix is to wait in catch_command_errors (which is specific to
main.c nowadays), just like we wait in execute_command.
gdb/ChangeLog:
2014-09-11 Pedro Alves <palves@redhat.com>
PR gdb/17347
* main.c: Include "infrun.h".
(catch_command_errors, catch_command_errors_const): Wait for the
foreground command to complete.
* top.c (maybe_wait_sync_command_done): New function, factored out
from ...
(maybe_wait_sync_command_done): ... here.
* top.h (maybe_wait_sync_command_done): New declaration.
gdb/testsuite/ChangeLog:
2014-09-11 Pedro Alves <palves@redhat.com>
PR gdb/17347
* lib/gdb.exp (gdb_spawn_with_cmdline_opts): New procedure.
* gdb.base/attach.exp (test_command_line_attach_run): New
procedure.
(top level): Call it.
This simplifies the .gdbinit filename selection logic.
We have a GDBINIT_FILENAME define that supposedly configurations would
override, but none do so. Instead, the only configuration that wants
a different file name instead of ".gdbinit", djgpp, does a strcpy over
the gdbinit global array. This means the array needs to be sized, and
the code that does that is doing the usual
'PATH_MAX/FILENAME_MAX/fallback constant/etc.' mess.
Instead of all that, it's much simpler to have configure specificy the
.gdbinit filename. As bonus, we can then make the "gdbinit" global
array const.
gdb/
2013-07-01 Pedro Alves <palves@redhat.com>
* configure.ac (GDBINIT): Define, depending on host.
* go32-nat.c (init_go32_ops): Don't override gdbinit here.
* top.c (PATH_MAX): Delete fallback definition.
(GDBINIT_FILENAME): Delete.
(gdbinit): Reimplement as const char array set to the GDBINIT
string constant.
* top.h (gdbinit): Make const.
* top.c (print_gdb_configuration): New function, displays the
details about GDB configure-time parameters.
(print_gdb_version): Mention "show configuration".
* cli/cli-cmds.c (show_configuration): New function.
(_initialize_cli_cmds): Add the "show configuration" command.
* main.c (captured_main) <print_configuration>: New static var.
<long_options>: Use it.
If --configuration was given, call print_gdb_configuration.
* doc/gdb.texinfo (Mode Options): Document '-configuration'.
(Help): Document "show configuration".
(Bug Reporting): Add requirements to include the configuration
details in bug reports.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
quit_cover, call pop_all_targets. Use TRY_CATCH instead of
catch_errors.
* top.c (quit_cover): Return void and take no arguments.
* top.h (quit_cover): Update prototype.
* event-top.h (MAXPROMPTS, struct prompts): Delete.
(set_async_annotation_level, set_async_prompt, pop_prompt)
(push_prompt, new_async_prompt): Delete declarations.
* top.h (get_prompt, set_prompt): Change prototype.
(get_prefix, set_prefix, get_suffix, set_suffix): Delete
declarations.
* top.c (command_loop):
(top_prompt): New global.
(get_prefix, set_prefix, get_suffix, ): Delete.
(get_prompt, set_prompt): Rewrite.
(show_new_async_prompt): Rename to ...
(show_prompt): ... this.
(init_main): Adjust. Don't handle --annotate=2 here.
* event-top.c (new_async_prompt): Delete.
(the_prompts): Delete.
(more_to_come): Make static.
(display_gdb_prompt): Use top_level_prompt() to compute the top
level prompt, and don't notify the before_prompt observers
directly here. Always trick readline into not trying to display
the prompt if sync_execution and displaying the primary prompt.
If displaying a local/secondary prompt, always show it, even if
sync_execution is set.
(change_annotation_level): Delete.
(top_level_prompt): New, based on change_annotation_level.
(push_prompt, pop_prompt): Delete.
(async_disable_stdin): No longer pushes prompt.
(command_line_handler): No longer pushes or pops prompt. If more
input is expected, call display_gdb_prompt with an explicit empty
prompt.
(async_stop_sig): Adjust.
(set_async_annotation_level, set_async_prompt): Delete.
* python/python.c (before_prompt_hook): Adjust.
* event-top.c (cli_command_loop): Use get_prompt, get_suffix,
get_prefix.
(display_gdb_prompt): Likewise.
(change_annotation_level): Likewise.
(push_prompt): Likewise.
(pop_prompt): Likewise.
(handle_stop_sig): Use get_prompt with a level.
* top.c (command_loop): Use get_prompt with a level.
(set_async_annotation_level): Use set_prompt with a level.
(get_prefix): New function.
(set_prefix): Ditto.
(set_suffix): Ditto.
(get_suffix): Ditto.
(get_prompt): Accept a level argument.
(set_prompt): Accept a level argument. Free old prompts. Set
new_async_prompt if level is 0.
(init_main): Use set_prompt with a level. Do not set
new_async_prompt.
* event-top.h (PROMPT, SUFFIX, PREFIX): Move to top.c
* top.h: Declare set_suffix, get_suffix, set_prefix, get_prefix.
Modify set_prompt, get_prompt to account for levels.
* tui/tui-interp.c (tui_command_loop): Use get_prompt with a
level
* python/python.c (before_prompt_hook): Use set_prompt.
* mi/mi-main.c (mi_cmd_execute): Use cleanup from
prepare_execute_command.
* top.c (prepare_execute_command): Return cleanup.
(execute_command): Use cleanup from prepare_execute_command.
* top.h (prepare_execute_command): Change prototype to return
cleanup.
* defs.h (struct value): Add opaque declaration.
(make_cleanup_value_free_to_mark): Add prototype.
* utils.c (do_value_free_to_mark): New function.
(make_cleanup_value_free_to_mark): Likewise.
gdb/testsuite/
* gdb.python/py-function.exp: Test setting a value from a function
which executes a command.
* NEWS: Add note on new "set stack-cache" option.
* corefile.c (read_stack): New function.
* dcache.c (dcache_struct): New member ptid.
(dcache_enable_p): Mark as obsolete.
(show_dcache_enabled_p): Flag option as deprecated.
(dcache_invalidate): Update ptid.
(dcache_invalidate_line): New function.
(dcache_read_line): No longer check cacheable attribute, stack
accesses get cached despite attribute.
(dcache_init): Set ptid.
(dcache_xfer_memory): Flush cache if from different ptid than before.
Update cache after write.
(dcache_update): New function.
(dcache_info): Report ptid.
(_initialize_dcache): Update text for `remotecache' to indicate it
is obsolete.
* dcache.h (dcache_update): Declare.
* dwarf2loc.c (dwarf2_evaluate_loc_desc): Mark values on stack with
set_value_stack.
* frame-unwind.c (frame_unwind_got_memory): Ditto.
* gdbcore.h (read_stack): Declare.
* memattr.c (mem_enable_command): Call target_dcache_invalidate
instead of dcache_invalidate.
(mem_disable_command, mem_delete_command): Ditto.
* target.c (stack_cache_enabled_p_1): New static global.
(stack_cache_enabled_p): New static global.
(set_stack_cache_enabled_p): New function.
(show_stack_cache_enabled_p): New function.
(target_dcache): Make static.
(target_dcache_invalidate): New function.
(target_load, target_resume): Call target_dcache_invalidate
instead of dcache_invalidate.
(memory_xfer_partial): New arg object, all callers updated.
Check for existing inferior before calling dcache routines.
When writing non-TARGET_OBJECT_STACK_MEMORY, notify dcache.
(target_xfer_partial): Call memory_xfer_partial for
TARGET_OBJECT_STACK_MEMORY.
(target_read_stack): New function.
(initialize_targets): Install new option `stack-cache'.
* target.h: Remove #include of dcache.h.
(enum target_object): New value TARGET_OBJECT_STACK_MEMORY.
(target_dcache): Delete.
(target_dcache_invalidate): Declare.
(target_read_stack): Declare.
* top.c (prepare_execute_command): New function.
(execute_command): Call prepare_execute_command
instead of free_all_values.
* top.h (prepare_execute_command): Declare.
* valops.c (get_value_at): New function.
(value_at): Guts moved to get_value_at.
(value_at_lazy): Similarly.
(value_fetch_lazy): Call read_stack for stack values.
* value.c (struct value): New member `stack'.
(value_stack, set_value_stack): New functions.
* value.h (value_stack, set_value_stack): Declare.
* mi/mi-main.c (mi_cmd_execute): Call prepare_execute_command
instead of free_all_values.
doc/
* gdb.texinfo (Caching Data of Remote Targets): Update text.
Mark `set/show remotecache' options as obsolete.
Document new `set/show stack-cache' option.
Update text for `info dcache'.
* top.h (source_error, source_pre_error): Delete declaration.
* cli/cli-script.c (source_error_allocated, source_error): Delete.
(script_from_file, source_cleanup_lines): Do not manipulate
source_error_allocated, error_pre_print and source_error.
(struct source_cleanup_lines_args): Delete fields old_pre_error,
and old_error_pre_print.
* top.c (source_error_allocated, source_error)
(source_pre_error): Delete.
(command_line_input): Do not set error_pre_print.
* event-top.c (command_line_handler): Do not set error_pre_print.
* main.c (captured_main): Set it.
* top.c (lim_at_start): Define.
(command_loop): Use it instead of &environ.
* event-top.c (command_handler): Likewise.
* gdb.base/selftest.exp: Next over lim_at_start initialization.
