This removes support for:
| target | source |
|-------------------+-----------------------|
| target m32rsdi | gdb/remote-m32r-sdi.c |
| target mips | gdb/remote-mips.c |
| target pmon | gdb/remote-mips.c |
| target ddb | gdb/remote-mips.c |
| target rockhopper | gdb/remote-mips.c |
| target lsi | gdb/remote-mips.c |
That is:
- Remote M32R debugging over SDI.
- Debugging boards using the MIPS remote debugging protocol
over a serial line, PMON, and a few variants.
These are the last non-"target remote" remote targets in the tree, if
you don't count "target sim".
Refs:
https://sourceware.org/ml/gdb/2016-03/msg00004.htmlhttps://sourceware.org/ml/gdb-patches/2016-03/msg00580.html
gdb/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
* NEWS: Mention that support for "target m32rsdi", "target mips",
"target pmon", "target ddb", "target rockhopper", and "target lsi"
was removed.
* Makefile.in (ALL_TARGET_OBS): Remove remote-m32r-sdi.o and
remote-mips.o.
(ALLDEPFILES): Remove remote-m32r-sdi.c and remote-mips.c.
* configure.tgt: Remove all references to remote-m32r-sdi.o and
remote-mips.o.
* mips-tdep.c (deprecated_mips_set_processor_regs_hack): Delete
function.
* mips-tdep.h (deprecated_mips_set_processor_regs_hack): Delete
declaration.
* remote-m32r-sdi.c, remote-mips.c: Delete files.
* symfile.c (generic_load, generic_load): Remove comments.
gdb/doc/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
* gdb.texinfo (M32R/SDI): Delete node.
(MIPS Embedded): Remove references to the MIPS remote debugging
protocol, PMON and variants, and the associated commands.
After the last gnulib import (Dec 2012), gnulib upstream started
replacing mingw's 'struct timeval' with a version with 64-bit time_t,
for POSIX compliance:
commit f8e84098084b3b53bc6943a5542af1f607ffd477
Author: Bruno Haible <bruno@clisp.org>
Date: Sat Jan 28 18:12:10 2012 +0100
sys_time: Override 'struct timeval' on some native Windows platforms.
See:
https://lists.gnu.org/archive/html/bug-gnulib/2012-01/msg00372.html
However, that results in conflicts with native Winsock2's 'select':
select()'s argument
http://sourceforge.net/p/mingw-w64/mailman/message/29610438/
... and libiberty's timeval-utils.h timeval_add/timeval_sub, at the
least.
We don't really need the POSIX compliance, so this patch prepares us
to simply not use gnulib's 'struct timeval' replacement once a more
recent gnulib is imported, thus preserving the current behavior, by
adding a sys/time.h wrapper header that undefs gnulib's replacements,
and including that everywhere instead.
The SIZE -> OSIZE change is necessary because newer gnulib's
sys/time.h also includes windows.h/winsock2.h, which defines a
conflicting SIZE symbol.
Cross build-tested mingw-w64 32-bit and 64-bit.
Regtested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add common/gdb_sys_time.h.
* common/gdb_sys_time.h: New file.
* event-loop.c: Include gdb_sys_time.h instead of sys/time.h.
* gdb_select.h: Likewise.
* gdb_usleep.c: Likewise.
* maint.c: Likewise.
* mi/mi-main.c: Likewise.
* mi/mi-parse.h: Likewise.
* remote-fileio.c: Likewise.
* remote-m32r-sdi.c: Likewise.
* remote.c: Likewise.
* ser-base.c: Likewise.
* ser-pipe.c: Likewise.
* ser-tcp.c: Likewise.
* ser-unix.c: Likewise.
* symfile.c: Likewise.
* symfile.c: Likewise. Rename OSIZE to SIZE throughout.
* target-memory.c: Include gdb_sys_time.h instead of sys/time.h.
* utils.c: Likewise.
gdb/gdbserver/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* debug.c: Include gdb_sys_time.h instead of sys/time.h.
* event-loop.c: Likewise.
* remote-utils.c: Likewise.
* tracepoint.c: Likewise.
As Pedro suggested on gdb-patches@ (see
https://sourceware.org/ml/gdb-patches/2015-05/msg00714.html), this
change makes symbol lookup functions return a structure that includes
both the symbol found and the block in which it was found. This makes
it possible to get rid of the block_found global variable and thus makes
block hunting explicit.
gdb/
* ada-exp.y (write_object_renaming): Replace struct
ada_symbol_info with struct block_symbol. Update field
references accordingly.
(block_lookup, select_possible_type_sym): Likewise.
(find_primitive_type): Likewise. Also update call to
ada_lookup_symbol to extract the symbol itself.
(write_var_or_type, write_name_assoc): Likewise.
* ada-lang.h (struct ada_symbol_info): Remove.
(ada_lookup_symbol_list): Replace struct ada_symbol_info with
struct block_symbol.
(ada_lookup_encoded_symbol, user_select_syms): Likewise.
(ada_lookup_symbol): Return struct block_symbol instead of a
mere symbol.
* ada-lang.c (defns_collected): Replace struct ada_symbol_info
with struct block_symbol.
(resolve_subexp, ada_resolve_function, sort_choices,
user_select_syms, is_nonfunction, add_defn_to_vec,
num_defns_collected, defns_collected,
symbols_are_identical_enums, remove_extra_symbols,
remove_irrelevant_renamings, add_lookup_symbol_list_worker,
ada_lookup_symbol_list, ada_iterate_over_symbols,
ada_lookup_encoded_symbol, get_var_value): Likewise.
(ada_lookup_symbol): Return a block_symbol instead of a mere
symbol. Replace struct ada_symbol_info with struct
block_symbol.
(ada_lookup_symbol_nonlocal): Likewise.
(standard_lookup): Make block passing explicit through
lookup_symbol_in_language.
* ada-tasks.c (get_tcb_types_info): Update the calls to
lookup_symbol_in_language to extract the mere symbol out of the
returned value.
(ada_tasks_inferior_data_sniffer): Likewise.
* ax-gdb.c (gen_static_field): Likewise for the call to
lookup_symbol.
(gen_maybe_namespace_elt): Deal with struct symbol_in_block from
lookup functions.
(gen_expr): Likewise.
* c-exp.y: Likewise. Remove uses of block_found.
(lex_one_token, classify_inner_name, c_print_token): Likewise.
(classify_name): Likewise. Rename the "sym" local variable to
"bsym".
* c-valprint.c (print_unpacked_pointer): Likewise.
* compile/compile-c-symbols.c (convert_symbol_sym): Promote the
"sym" parameter from struct symbol * to struct block_symbol.
Use it to remove uses of block_found. Deal with struct
symbol_in_block from lookup functions.
(gcc_convert_symbol): Likewise. Update the call to
convert_symbol_sym.
* compile/compile-object-load.c (compile_object_load): Deal with
struct symbol_in_block from lookup functions.
* cp-namespace.c (cp_lookup_nested_symbol_1,
cp_lookup_nested_symbol, cp_lookup_bare_symbol,
cp_search_static_and_baseclasses,
cp_lookup_symbol_in_namespace, cp_lookup_symbol_via_imports,
cp_lookup_symbol_imports_or_template,
cp_lookup_symbol_via_all_imports, cp_lookup_symbol_namespace,
lookup_namespace_scope, cp_lookup_nonlocal,
find_symbol_in_baseclass): Return struct symbol_in_block instead
of mere symbols and deal with struct symbol_in_block from lookup
functions.
* cp-support.c (inspect_type, replace_typedefs,
cp_lookup_rtti_type): Deal with struct symbol_in_block from
lookup functions.
* cp-support.h (cp_lookup_symbol_nonlocal,
cp_lookup_symbol_from_namespace,
cp_lookup_symbol_imports_or_template, cp_lookup_nested_symbol):
Return struct symbol_in_block instead of mere symbols.
* d-exp.y (d_type_from_name, d_module_from_name, push_variable,
push_module_name):
Deal with struct symbol_in_block from lookup functions. Remove
uses of block_found.
* eval.c (evaluate_subexp_standard): Update call to
cp_lookup_symbol_namespace.
* f-exp.y: Deal with struct symbol_in_block from lookup
functions. Remove uses of block_found.
(yylex): Likewise.
* gdbtypes.c (lookup_typename, lookup_struct, lookup_union,
lookup_enum, lookup_template_type, check_typedef): Deal with
struct symbol_in_block from lookup functions.
* guile/scm-frame.c (gdbscm_frame_read_var): Likewise.
* guile/scm-symbol.c (gdbscm_lookup_symbol): Likewise.
(gdbscm_lookup_global_symbol): Likewise.
* gnu-v3-abi.c (gnuv3_get_typeid_type): Likewise.
* go-exp.y: Likewise. Remove uses of block_found.
(package_name_p, classify_packaged_name, classify_name):
Likewise.
* infrun.c (insert_exception_resume_breakpoint): Likewise.
* jv-exp.y (push_variable): Likewise.
* jv-lang.c (java_lookup_class, get_java_object_type): Likewise.
* language.c (language_bool_type): Likewise.
* language.h (struct language_defn): Update
la_lookup_symbol_nonlocal to return a struct symbol_in_block
rather than a mere symbol.
* linespec.c (find_label_symbols): Deal with struct
symbol_in_block from lookup functions.
* m2-exp.y: Likewise. Remove uses of block_found.
(yylex): Likewise.
* mi/mi-cmd-stack.c (list_args_or_locals): Likewise.
* objc-lang.c (lookup_struct_typedef, find_imps): Likewise.
* p-exp.y: Likewise. Remove uses of block_found.
(yylex): Likewise.
* p-valprint.c (pascal_val_print): Likewise.
* parse.c (write_dollar_variable): Likewise. Remove uses of
block_found.
* parser-defs.h (struct symtoken): Turn the SYM field into a
struct symbol_in_block.
* printcmd.c (address_info): Deal with struct symbol_in_block
from lookup functions.
* python/py-frame.c (frapy_read_var): Likewise.
* python/py-symbol.c (gdbpy_lookup_symbol,
gdbpy_lookup_global_symbol): Likewise.
* skip.c (skip_function_command): Likewise.
* solib-darwin.c (darwin_lookup_lib_symbol): Return a struct
symbol_in_block instead of a mere symbol.
* solib-spu.c (spu_lookup_lib_symbol): Likewise.
* solib-svr4.c (elf_lookup_lib_symbol): Likewise.
* solib.c (solib_global_lookup): Likewise.
* solist.h (solib_global_lookup): Likewise.
(struct target_so_ops): Update lookup_lib_global_symbol to
return a struct symbol_in_block rather than a mere symbol.
* source.c (select_source_symtab): Deal with struct
symbol_in_block from lookup functions.
* stack.c (print_frame_args, iterate_over_block_arg_vars):
Likewise.
* symfile.c (set_initial_language): Likewise.
* symtab.c (SYMBOL_LOOKUP_FAILED): Turn into a struct
symbol_in_block.
(SYMBOL_LOOKUP_FAILED_P): New predicate as a macro.
(struct symbol_cache_slot): Turn the FOUND field into a struct
symbol_in_block.
(block_found): Remove.
(eq_symbol_entry): Update to deal with struct symbol_in_block in
cache slots.
(symbol_cache_lookup): Return a struct symbol_in_block rather
than a mere symbol.
(symbol_cache_mark_found): Add a BLOCK parameter to fill
appropriately the cache slots. Update callers.
(symbol_cache_dump): Update cache slots handling to the type
change.
(lookup_symbol_in_language, lookup_symbol, lookup_language_this,
lookup_symbol_aux, lookup_local_symbol,
lookup_symbol_in_objfile, lookup_global_symbol_from_objfile,
lookup_symbol_in_objfile_symtabs,
lookup_symbol_in_objfile_from_linkage_name,
lookup_symbol_via_quick_fns, basic_lookup_symbol_nonlocal,
lookup_symbol_in_static_block, lookup_static_symbol,
lookup_global_symbol):
Return a struct symbol_in_block rather than a mere symbol. Deal
with struct symbol_in_block from other lookup functions. Remove
uses of block_found.
(lookup_symbol_in_block): Remove uses of block_found.
(struct global_sym_lookup_data): Turn the RESULT field into a
struct symbol_in_block.
(lookup_symbol_global_iterator_cb): Update references to the
RESULT field.
(search_symbols): Deal with struct symbol_in_block from lookup
functions.
* symtab.h (struct symbol_in_block): New structure.
(block_found): Remove.
(lookup_symbol_in_language, lookup_symbol,
basic_lookup_symbol_nonlocal, lookup_symbol_in_static_block,
looku_static_symbol, lookup_global_symbol,
lookup_symbol_in_block, lookup_language_this,
lookup_global_symbol_from_objfile): Return a struct
symbol_in_block rather than just a mere symbol. Update comments
to remove mentions of block_found.
* valops.c (find_function_in_inferior,
value_struct_elt_for_reference, value_maybe_namespace_elt,
value_of_this): Deal with struct symbol_in_block from lookup
functions.
* value.c (value_static_field, value_fn_field): Likewise.
symfile_bfd_open handled what were remote files as a special case.
Converting from "remote:" files to "target:" made symfile_bfd_open
look like this:
if remote:
open bfd, check format, etc
return
local-specific stuff
open bfd, check format, etc
return
This commit rearranges symfile_bfd_open to remove the duplicated
code, like this:
if local:
local-specific stuff
open bfd, check format, etc
return
gdb/ChangeLog:
* symfile.c (symfile_bfd_open): Reorder to remove duplicated
checks and error messages.
The functionality of "target:" sysroots is a superset of the
functionality of "remote:" sysroots. This commit causes the
"set sysroot" command to rewrite "remote:" sysroots as "target:"
sysroots and replaces "remote:" specific code with "target:"
specific code where still necessary.
gdb/ChangeLog:
* remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
(remote_filename_p): Remove declaration.
(remote_bfd_open): Likewise.
* remote.c (remote_bfd_iovec_open): Remove function.
(remote_bfd_iovec_close): Likewise.
(remote_bfd_iovec_pread): Likewise.
(remote_bfd_iovec_stat): Likewise.
(remote_filename_p): Likewise.
(remote_bfd_open): Likewise.
* symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
* symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
(gdb_bfd_open_maybe_remote): Remove function.
(symfile_bfd_open): Replace remote filename check with
target filename check.
(reread_symbols): Use gdb_bfd_open.
* build-id.c (gdbcore.h): New include.
(build_id_to_debug_bfd): Use gdb_bfd_open.
* infcmd.c (attach_command_post_wait): Remove remote filename
check.
* solib.c (solib_find): Replace remote-specific handling with
target-specific handling. Update comments where necessary.
(solib_bfd_open): Replace remote-specific handling with
target-specific handling.
(gdb_sysroot_changed): New function.
(_initialize_solib): Call the above when gdb_sysroot changes.
* windows-tdep.c (gdbcore.h): New include.
(windows_xfer_shared_library): Use gdb_bfd_open.
This commit adds a new packet "vFile:fstat:" to the remote protocol
that can be used by to retrieve information about files that have
been previously opened using vFile:open. vFile:fstat: support is
added to GDB, and remote_bfd_iovec_stat is implemented using it. If
vFile:fstat: is not supported by the remote GDB creates a dummy result
by zeroing the supplied stat structure and setting its st_size field
to INT_MAX. This mimics GDB's previous behaviour, with the exception
that GDB did not previously zero the structure so all other fields
would have been returned unchanged, which is to say very likely
populated with random values from the stack.
gdb/ChangeLog:
* remote-fileio.h (remote_fileio_to_host_stat): New declaration.
* remote-fileio.c (remote_fileio_to_host_uint): New function.
(remote_fileio_to_host_ulong): Likewise.
(remote_fileio_to_host_mode): Likewise.
(remote_fileio_to_host_time): Likewise.
(remote_fileio_to_host_stat): Likewise.
* remote.c (PACKET_vFile_fstat): New enum value.
(remote_protocol_features): Register the "vFile:fstat" feature.
(remote_hostio_fstat): New function.
(remote_bfd_iovec_stat): Use the above.
(_initialize_remote): Register new "set/show remote
hostio-fstat-packet" command.
* symfile.c (separate_debug_file_exists): Update comment.
* NEWS: Announce new vFile:fstat packet.
gdb/doc/ChangeLog:
* gdb.texinfo (Remote Configuration): Document the
"set/show remote hostio-fstat-packet" command.
(General Query Packets): Document the vFile:fstat
qSupported features.
(Host I/O Packets): Document the vFile:fstat packet.
This commit adds a new callback parameter, "expansion_notify", to the
top-level expand_symtabs_matching function and to all the vectorized
functions it defers to. If expansion_notify is non-NULL, it will be
called every time a symbol table is expanded.
gdb/ChangeLog:
* symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
(struct quick_symbol_functions) <expand_symtabs_matching>:
New argument expansion_notify. All uses updated.
(expand_symtabs_matching): New argument expansion_notify.
All uses updated.
* symfile-debug.c (debug_qf_expand_symtabs_matching):
Also print expansion notify.
* symtab.c (expand_symtabs_matching_via_partial): Call
expansion_notify whenever a partial symbol table is expanded.
* dwarf2read.c (dw2_expand_symtabs_matching): Call
expansion_notify whenever a symbol table is instantiated.
Compilation of (GDB) 7.9.50.20150127-cvs with (GCC) 5.0.0 20150127
fails with
In file included from symfile.c:32:0:
symfile.c: In function 'unmap_overlay_command':
objfiles.h:628:3: error: 'sec' may be used uninitialized in this
function [-Werror=maybe-uninitialized]
for (osect = objfile->sections; osect < objfile->sections_end; osect++) \
^
symfile.c:3442:23: note: 'sec' was declared here
struct obj_section *sec;
^
cc1: all warnings being treated as errors
make[2]: *** [symfile.o] Error 1
make[2]: Leaving directory `gdb/gdb'
While the bug was reported to GCC as
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=64823>,
the attached patch simply initializes sec with NULL.
gdb/ChangeLog:
* symfile.c (unmap_overlay_command): Initialize sec to NULL.
Tested on x86_64-linux.
Since lstat gnulib module is imported, we can use it unconditionally.
lstat usage was introduced by this patch
https://sourceware.org/ml/gdb-patches/2012-01/msg00390.html
during the review, it was suggested to import gnulib lstat module, but
we didn't do that.
gdb:
2014-11-28 Yao Qi <yao@codesourcery.com>
* configure.ac (AC_CHECK_FUNCS): Remove lstat.
* config.in, configure: Regenerate.
* symfile.c (find_separate_debug_file_by_debuglink): Remove
code checking HAVE_LSTAT is defined.
Currently "symtabs" in gdb are stored as a single linked list of
struct symtab that contains both symbol symtabs (the blockvectors)
and file symtabs (the linetables).
This has led to confusion, bugs, and performance issues.
This patch is conceptually very simple: split struct symtab into
two pieces: one part containing things common across the entire
compilation unit, and one part containing things specific to each
source file.
Example.
For the case of a program built out of these files:
foo.c
foo1.h
foo2.h
bar.c
foo1.h
bar.h
Today we have a single list of struct symtabs:
objfile -> foo.c -> foo1.h -> foo2.h -> bar.c -> foo1.h -> bar.h -> NULL
where "->" means the "next" pointer in struct symtab.
With this patch, that turns into:
objfile -> foo.c(cu) -> bar.c(cu) -> NULL
| |
v v
foo.c bar.c
| |
v v
foo1.h foo1.h
| |
v v
foo2.h bar.h
| |
v v
NULL NULL
where "foo.c(cu)" and "bar.c(cu)" are struct compunit_symtab objects,
and the files foo.c, etc. are struct symtab objects.
So now, for example, when we want to iterate over all blockvectors
we can now just iterate over the compunit_symtab list.
Plus a lot of the data that was either unused or replicated for each
symtab in a compilation unit now lives in struct compunit_symtab.
E.g., the objfile pointer, the producer string, etc.
I thought of moving "language" out of struct symtab but there is
logic to try to compute the language based on previously seen files,
and I think that's best left as is for now.
With my standard monster benchmark with -readnow (which I can't actually
do, but based on my calculations), whereas today the list requires
77MB to store all the struct symtabs, it now only requires 37MB.
A modest space savings given the gigabytes needed for all the debug info,
etc. Still, it's nice. Plus, whereas today we create a copy of dirname
for each source file symtab in a compilation unit, we now only create one
for the compunit.
So this patch is basically just a data structure reorg,
I don't expect significant performance improvements from it.
Notes:
1) A followup patch can do a similar split for struct partial_symtab.
I have left that until after I get the changes I want in to
better utilize .gdb_index (it may affect how we do partial syms).
2) Another followup patch *could* rename struct symtab.
The term "symtab" is ambiguous and has been a source of confusion.
In this patch I'm leaving it alone, calling it the "historical" name
of "filetabs", which is what they are now: just the file-name + line-table.
gdb/ChangeLog:
Split struct symtab into two: struct symtab and compunit_symtab.
* amd64-tdep.c (amd64_skip_xmm_prologue): Fetch producer from compunit.
* block.c (blockvector_for_pc_sect): Change "struct symtab *" argument
to "struct compunit_symtab *". All callers updated.
(set_block_compunit_symtab): Renamed from set_block_symtab. Change
"struct symtab *" argument to "struct compunit_symtab *".
All callers updated.
(get_block_compunit_symtab): Renamed from get_block_symtab. Change
result to "struct compunit_symtab *". All callers updated.
(find_iterator_compunit_symtab): Renamed from find_iterator_symtab.
Change result to "struct compunit_symtab *". All callers updated.
* block.h (struct global_block) <compunit_symtab>: Renamed from symtab.
hange type to "struct compunit_symtab *". All uses updated.
(struct block_iterator) <d.compunit_symtab>: Renamed from "d.symtab".
Change type to "struct compunit_symtab *". All uses updated.
* buildsym.c (struct buildsym_compunit): New struct.
(subfiles, buildsym_compdir, buildsym_objfile, main_subfile): Delete.
(buildsym_compunit): New static global.
(finish_block_internal): Update to fetch objfile from
buildsym_compunit.
(make_blockvector): Delete objfile argument.
(start_subfile): Rewrite to use buildsym_compunit. Don't initialize
debugformat, producer.
(start_buildsym_compunit): New function.
(free_buildsym_compunit): Renamed from free_subfiles_list.
All callers updated.
(patch_subfile_names): Rewrite to use buildsym_compunit.
(get_compunit_symtab): New function.
(get_macro_table): Delete argument comp_dir. All callers updated.
(start_symtab): Change result to "struct compunit_symtab *".
All callers updated. Create the subfile of the main source file.
(watch_main_source_file_lossage): Rewrite to use buildsym_compunit.
(reset_symtab_globals): Update.
(end_symtab_get_static_block): Update to use buildsym_compunit.
(end_symtab_without_blockvector): Rewrite.
(end_symtab_with_blockvector): Change result to
"struct compunit_symtab *". All callers updated.
Update to use buildsym_compunit. Don't set symtab->dirname,
instead set it in the compunit.
Explicitly make sure main symtab is first in its list.
Set debugformat, producer, blockvector, block_line_section, and
macrotable in the compunit.
(end_symtab_from_static_block): Change result to
"struct compunit_symtab *". All callers updated.
(end_symtab, end_expandable_symtab): Ditto.
(set_missing_symtab): Change symtab argument to
"struct compunit_symtab *". All callers updated.
(augment_type_symtab): Ditto.
(record_debugformat): Update to use buildsym_compunit.
(record_producer): Update to use buildsym_compunit.
* buildsym.h (struct subfile) <dirname>: Delete.
<producer, debugformat>: Delete.
<buildsym_compunit>: New member.
(get_compunit_symtab): Declare.
* dwarf2read.c (struct type_unit_group) <compunit_symtab>: Renamed
from primary_symtab. Change type to "struct compunit_symtab *".
All uses updated.
(dwarf2_start_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dwarf_decode_macros): Delete comp_dir argument. All callers updated.
(struct dwarf2_per_cu_quick_data) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
(dw2_instantiate_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dw2_find_last_source_symtab): Ditto.
(dw2_lookup_symbol): Ditto.
(recursively_find_pc_sect_compunit_symtab): Renamed from
recursively_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(dw2_find_pc_sect_compunit_symtab): Renamed from
dw2_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(get_compunit_symtab): Renamed from get_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(recursively_compute_inclusions): Change type of immediate_parent
argument to "struct compunit_symtab *". All callers updated.
(compute_compunit_symtab_includes): Renamed from
compute_symtab_includes. All callers updated. Rewrite to compute
includes of compunit_symtabs and not symtabs.
(process_full_comp_unit): Update to work with struct compunit_symtab.
(process_full_type_unit): Ditto.
(dwarf_decode_lines_1): Delete argument comp_dir. All callers updated.
(dwarf_decode_lines): Remove special case handling of main subfile.
(macro_start_file): Delete argument comp_dir. All callers updated.
(dwarf_decode_macro_bytes): Ditto.
* guile/scm-block.c (bkscm_print_block_syms_progress_smob): Update to
use struct compunit_symtab.
* i386-tdep.c (i386_skip_prologue): Fetch producer from compunit.
* jit.c (finalize_symtab): Build compunit_symtab.
* jv-lang.c (get_java_class_symtab): Change result to
"struct compunit_symtab *". All callers updated.
* macroscope.c (sal_macro_scope): Fetch macro table from compunit.
* macrotab.c (struct macro_table) <compunit_symtab>: Renamed from
comp_dir. Change type to "struct compunit_symtab *".
All uses updated.
(new_macro_table): Change comp_dir argument to cust,
"struct compunit_symtab *". All callers updated.
* maint.c (struct cmd_stats) <nr_compunit_symtabs>: Renamed from
nr_primary_symtabs. All uses updated.
(count_symtabs_and_blocks): Update to handle compunits.
(report_command_stats): Update output, "primary symtabs" renamed to
"compunits".
* mdebugread.c (new_symtab): Change result to
"struct compunit_symtab *". All callers updated.
(parse_procedure): Change type of search_symtab argument to
"struct compunit_symtab *". All callers updated.
* objfiles.c (objfile_relocate1): Loop over blockvectors in a
separate loop.
* objfiles.h (struct objfile) <compunit_symtabs>: Renamed from
symtabs. Change type to "struct compunit_symtab *". All uses updated.
(ALL_OBJFILE_FILETABS): Renamed from ALL_OBJFILE_SYMTABS.
All uses updated.
(ALL_OBJFILE_COMPUNITS): Renamed from ALL_OBJFILE_PRIMARY_SYMTABS.
All uses updated.
(ALL_FILETABS): Renamed from ALL_SYMTABS. All uses updated.
(ALL_COMPUNITS): Renamed from ALL_PRIMARY_SYMTABS. All uses updated.
* psympriv.h (struct partial_symtab) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
* psymtab.c (psymtab_to_symtab): Change result type to
"struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab_from_partial): Renamed from
find_pc_sect_symtab_from_partial. Change result type to
"struct compunit_symtab *". All callers updated.
(lookup_symbol_aux_psymtabs): Change result type to
"struct compunit_symtab *". All callers updated.
(find_last_source_symtab_from_partial): Ditto.
* python/py-symtab.c (stpy_get_producer): Fetch producer from compunit.
* source.c (forget_cached_source_info_for_objfile): Fetch debugformat
and macro_table from compunit.
* symfile-debug.c (debug_qf_find_last_source_symtab): Change result
type to "struct compunit_symtab *". All callers updated.
(debug_qf_lookup_symbol): Ditto.
(debug_qf_find_pc_sect_compunit_symtab): Renamed from
debug_qf_find_pc_sect_symtab, change result type to
"struct compunit_symtab *". All callers updated.
* symfile.c (allocate_symtab): Delete objfile argument.
New argument cust.
(allocate_compunit_symtab): New function.
(add_compunit_symtab_to_objfile): New function.
* symfile.h (struct quick_symbol_functions) <lookup_symbol>:
Change result type to "struct compunit_symtab *". All uses updated.
<find_pc_sect_compunit_symtab>: Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All uses updated.
* symmisc.c (print_objfile_statistics): Compute blockvector count in
separate loop.
(dump_symtab_1): Update test for primary source symtab.
(maintenance_info_symtabs): Update to handle compunit symtabs.
(maintenance_check_symtabs): Ditto.
* symtab.c (set_primary_symtab): Delete.
(compunit_primary_filetab): New function.
(compunit_language): New function.
(iterate_over_some_symtabs): Change type of arguments "first",
"after_last" to "struct compunit_symtab *". All callers updated.
Update to loop over symtabs in each compunit.
(error_in_psymtab_expansion): Rename symtab argument to cust,
and change type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab): Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_compunit_symtab): Renamed from find_pc_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_line): Only loop over symtabs within selected compunit
instead of all symtabs in the objfile.
* symtab.h (struct symtab) <blockvector>: Moved to compunit_symtab.
<compunit_symtab> New member.
<block_line_section>: Moved to compunit_symtab.
<locations_valid>: Ditto.
<epilogue_unwind_valid>: Ditto.
<macro_table>: Ditto.
<dirname>: Ditto.
<debugformat>: Ditto.
<producer>: Ditto.
<objfile>: Ditto.
<call_site_htab>: Ditto.
<includes>: Ditto.
<user>: Ditto.
<primary>: Delete
(SYMTAB_COMPUNIT): New macro.
(SYMTAB_BLOCKVECTOR): Update definition.
(SYMTAB_OBJFILE): Update definition.
(SYMTAB_DIRNAME): Update definition.
(struct compunit_symtab): New type. Common members among all source
symtabs within a compilation unit moved here. All uses updated.
(COMPUNIT_OBJFILE): New macro.
(COMPUNIT_FILETABS): New macro.
(COMPUNIT_DEBUGFORMAT): New macro.
(COMPUNIT_PRODUCER): New macro.
(COMPUNIT_DIRNAME): New macro.
(COMPUNIT_BLOCKVECTOR): New macro.
(COMPUNIT_BLOCK_LINE_SECTION): New macro.
(COMPUNIT_LOCATIONS_VALID): New macro.
(COMPUNIT_EPILOGUE_UNWIND_VALID): New macro.
(COMPUNIT_CALL_SITE_HTAB): New macro.
(COMPUNIT_MACRO_TABLE): New macro.
(ALL_COMPUNIT_FILETABS): New macro.
(compunit_symtab_ptr): New typedef.
(DEF_VEC_P (compunit_symtab_ptr)): New vector type.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Update expected output.
This makes the argument to the target_ops to_load method "const", and
fixes up the fallout. Tested by rebuilding all the affected files.
2014-06-26 Tom Tromey <tromey@redhat.com>
* defs.h (generic_load): Update.
* m32r-rom.c (m32r_load_gen): Make "filename" const.
* monitor.c (monitor_load): Make "args" const.
* remote-m32r-sdi.c (m32r_load): Make "args" const.
* remote-mips.c (mips_load_srec, pmon_load_fast): Make "args"
const.
(mips_load): Make "file" const.
* remote-sim.c (gdbsim_load): Make "args" const.
* remote.c (remote_load): Make "name" const.
* symfile.c (generic_load): Make "args" const.
* target-delegates.c: Rebuild.
* target.c (target_load): Make "arg" const.
(debug_to_load): Make "args" const.
* target.h (struct target_ops) <to_load>: Make parameter const.
(target_load): Update.
Turns out there's a difference between loading the program with "gdb
PROGRAM", vs loading it with "(gdb) file PROGRAM". The latter results
in the objfile ending up with OBJF_USERLOADED set, while not with the
former. (That difference seems bogus, but still that's not the point
of this patch. We can revisit that afterwards.)
The new code that suppresses breakpoint removal errors for
add-symbol-file objects ends up being too greedy:
/* In some cases, we might not be able to remove a breakpoint in
a shared library that has already been removed, but we have
not yet processed the shlib unload event. Similarly for an
unloaded add-symbol-file object - the user might not yet have
had the chance to remove-symbol-file it. shlib_disabled will
be set if the library/object has already been removed, but
the breakpoint hasn't been uninserted yet, e.g., after
"nosharedlibrary" or "remove-symbol-file" with breakpoints
always-inserted mode. */
if (val
&& (bl->loc_type == bp_loc_software_breakpoint
&& (bl->shlib_disabled
|| solib_name_from_address (bl->pspace, bl->address)
|| userloaded_objfile_contains_address_p (bl->pspace,
bl->address))))
val = 0;
as it turns out that OBJF_USERLOADED can be set for objfiles loaded by
some other means not add-symbol-file. In this case, symbol-file (or
"file", which is really just "exec-file"+"symbol-file").
Recall that add-symbol-file is documented as:
(gdb) help add-symbol-file
Load symbols from FILE, assuming FILE has been dynamically loaded.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
And it's the "dynamically loaded" aspect that the breakpoint.c code
cares about. So make add-symbol-file set OBJF_SHARED on its objfiles
too, and tweak the breakpoint.c code to look for OBJF_SHARED instead
of OBJF_USERLOADED.
This restores back the missing breakpoint removal warning when we let
sss-bp-on-user-bp-2.exp run on native GNU/Linux
(https://sourceware.org/ml/gdb-patches/2014-06/msg00335.html):
(gdb) PASS: gdb.base/sss-bp-on-user-bp-2.exp: define stepi_del_break
stepi_del_break
warning: Error removing breakpoint 3
(gdb) FAIL: gdb.base/sss-bp-on-user-bp-2.exp: stepi_del_break
I say "restores" because this was GDB's behavior in 7.7 and earlier.
And, likewise, "file" with no arguments only started turning
breakpoints set in the main executable to "<pending>" with the
remote-symbol-file patch (63644780). The old behavior is now
restored, and we break-unload-file.exp test now exercizes both "gdb;
file PROGRAM" and "gdb PROGRAM".
gdb/
2014-06-16 Pedro Alves <palves@redhat.com>
* breakpoint.c (insert_bp_location, remove_breakpoint_1): Adjust.
(disable_breakpoints_in_freed_objfile): Skip objfiles that don't
have OBJF_SHARED set.
* objfiles.c (userloaded_objfile_contains_address_p): Rename to...
(shared_objfile_contains_address_p): ... this. Check OBJF_SHARED
instead of OBJF_USERLOADED.
* objfiles.h (OBJF_SHARED): Update comment.
(userloaded_objfile_contains_address_p): Rename to ...
(shared_objfile_contains_address_p): ... this, and update
comments.
* symfile.c (add_symbol_file_command): Also set OBJF_SHARED in the
new objfile.
(remove_symbol_file_command): Skip objfiles that don't have
OBJF_SHARED set.
gdb/testsuite/
2014-06-16 Pedro Alves <palves@redhat.com>
* gdb.base/break-main-file-remove-fail.c: New file.
* gdb.base/break-main-file-remove-fail.exp: New file.
* gdb.base/break-unload-file.exp: Use build_executable instead of
prepare_for_testing.
(test_break): New parameter "initial_load". Handle it.
(top level): Add initial_load cmdline/file axis.
Currently there are many calls to help_list that pass the constant -1
as the "class" value. However, the parameter is declared as being of
type enum command_class, and uses of the constant violate this
abstraction.
This patch fixes the error everywhere it occurs in the gdb sources.
Tested by rebuilding.
2014-06-13 Tom Tromey <tromey@redhat.com>
* cp-support.c (maint_cplus_command): Pass all_commands, not -1,
to help_list.
* guile/guile.c (info_guile_command): Pass all_commands, not -1,
to help_list.
* tui/tui-win.c (tui_command): Pass all_commands, not -1, to
help_list.
* tui/tui-regs.c (tui_reg_command): Pass all_commands, not -1, to
help_list.Pass all_commands, not -1, to help_list.
* cli/cli-dump.c (dump_command, append_command)
(srec_dump_command, ihex_dump_command, tekhex_dump_command)
(binary_dump_command, binary_append_command): Pass all_commands,
not -1, to help_list.
* cli/cli-cmds.c (info_command, set_debug): Pass all_commands, not
-1, to help_list.
* valprint.c (set_print, set_print_raw): Pass all_commands, not
-1, to help_list.
* typeprint.c (set_print_type): Pass all_commands, not -1, to
help_list.
* top.c (set_history): Pass all_commands, not -1, to help_list.
* target-descriptions.c (set_tdesc_cmd, unset_tdesc_cmd): Pass
all_commands, not -1, to help_list.
* symfile.c (overlay_command): Pass all_commands, not -1, to
help_list.
* spu-tdep.c (info_spu_command): Pass all_commands, not -1, to
help_list.
* serial.c (serial_set_cmd): Pass all_commands, not -1, to
help_list.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Pass all_commands, not
-1, to help_list.
* remote.c (remote_command, set_remote_cmd): Pass all_commands,
not -1, to help_list.
* ravenscar-thread.c (set_ravenscar_command): Pass all_commands,
not -1, to help_list.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_print_command, maintenance_set_cmd): Pass
all_commands, not -1, to help_list.
* macrocmd.c (macro_command): Pass all_commands, not -1, to
help_list.
* language.c (set_check): Pass all_commands, not -1, to help_list.
* infcmd.c (unset_command): Pass all_commands, not -1, to
help_list.
* frame.c (set_backtrace_cmd): Pass all_commands, not -1, to
help_list.
* dwarf2read.c (set_dwarf2_cmd): Pass all_commands, not -1, to
help_list.
* dcache.c (set_dcache_command): Pass all_commands, not -1, to
help_list.
* breakpoint.c (save_command): Pass all_commands, not -1, to
help_list.
* ada-lang.c (maint_set_ada_cmd, set_ada_command): Pass
all_commands, not -1, to help_list.
Target sections added by the add-symbol-file-from-memory command are not
removed when the process exits. In fact, they are not removed, at all.
This causes GDB to crash in gdb.base/break-interp.exp.
Change the owner of those target sections to the object file generated in
symbol_file_add_from_memory and generalize the free_objfile observer in
symfile.c to remove target sections of any freed object file.
* NEWS: Mention it.
* solib.c (solib_read_symbols): Only print symbol loading messages
if requested.
(solib_add): If symbol loading is in "brief" mode, notify user
symbols are being loaded.
(reload_shared_libraries_1): Ditto.
* symfile.c (print_symbol_loading_off): New static global.
(print_symbol_loading_brief): New static global.
(print_symbol_loading_full): New static global.
(print_symbol_loading_enums): New static global.
(print_symbol_loading): New static global.
(print_symbol_loading_p): New function.
(symbol_file_add_with_addrs): Only print symbol loading messages
if requested.
(_initialize_symfile): Register "print symbol-loading" set/show
command.
* symfile.h (print_symbol_loading_p): Declare.
doc/
* gdb.texinfo (Symbols): Document set/show print symbol-loading.
testsuite/
* gdb.base/print-symbol-loading-lib.c: New file.
* gdb.base/print-symbol-loading-main.c: New file.
* gdb.base/print-symbol-loading.exp: New file.
Now that minimal symbols are independent of the program space, we can
move them to the per-BFD object. This lets us save memory in the
multi-inferior case; and, once the symbol readers are updated, time.
The other prerequisite for this move is that all the objects referred
to by the minimal symbols have a lifetime at least as long as the
per-BFD object. I think this is satisfied partially by this patch
(moving the copied names there) and partially by earlier patches
moving the demangled name hash.
This patch contains a bit of logic to avoid creating new minimal
symbols if they have already been read for a given BFD. This allows
us to avoid trying to update all the symbol readers for this
condition. At first glance this may seem like a hack, but some symbol
readers mix psym and minsym reading, and would require logic just like
this regardless -- and it is simpler and less error-prone to just do
the work in a central spot.
2014-02-26 Tom Tromey <tromey@redhat.com>
* minsyms.c (lookup_minimal_symbol, iterate_over_minimal_symbols)
(lookup_minimal_symbol_text, lookup_minimal_symbol_by_pc_name)
(lookup_minimal_symbol_solib_trampoline)
(lookup_minimal_symbol_by_pc_section_1)
(lookup_minimal_symbol_and_objfile): Update.
(prim_record_minimal_symbol_full): Use the per-BFD obstack.
Don't allocate a minimal symbol if minsyms have already been read.
(build_minimal_symbol_hash_tables): Update.
(install_minimal_symbols): Do nothing if minsyms already read.
Use the per-BFD obstack.
(terminate_minimal_symbol_table): Use the per-BFD obstack.
* objfiles.c (allocate_objfile): Call
terminate_minimal_symbol_table later.
(have_minimal_symbols): Update.
* objfiles.h (struct objfile_per_bfd_storage) <msymbols,
minimal_symbol_count, msymbol_hash, msymbol_demangled_hash>:
Move from struct objfile.
<minsyms_read>: New field.
(struct objfile) <msymbols, minimal_symbol_count,
msymbol_hash, msymbol_demangled_hash>: Move.
(ALL_OBJFILE_MSYMBOLS): Update.
* symfile.c (read_symbols): Set minsyms_read.
(reread_symbols): Update.
* symmisc.c (dump_objfile, dump_msymbols): Update.
This makes the global language_of_main static. Now it can be set only
via a new argument to set_main_name.
2014-01-15 Tom Tromey <tromey@redhat.com>
* dbxread.c (process_one_symbol): Update.
* dwarf2read.c (read_partial_die): Update.
* symfile.c (set_initial_language): Call main_language.
* symtab.c (language_of_main): Now static.
(set_main_name): Add 'lang' parameter.
(find_main_name): Update.
(main_language): New function.
(symtab_observer_executable_changed): Update.
* symtab.h (set_main_name): Update.
(language_of_main): Remove.
(main_language): Declare.
This moves the entry point information into the per-BFD object and
arranges not to recompute it when it has already been computed.
2014-01-15 Tom Tromey <tromey@redhat.com>
* symfile.c (init_entry_point_info): Use new "initialized" field.
Update.
* objfiles.h (struct entry_point) <initialized>: New field.
(struct objfile_per_bfd_storage) <ei>: New field, moved from...
(struct objfile) <ei>: ...here. Remove.
* objfiles.c (entry_point_address_query): Update.
This changes the entry point to be unrelocated in the objfile, and
instead applies the relocation when it is used.
2014-01-15 Tom Tromey <tromey@redhat.com>
* objfiles.c (entry_point_address_query): Relocate entry point
address.
(objfile_relocate1): Do not relocate entry point address.
* objfiles.h (struct entry_info) <entry_point>: Update comment.
<the_bfd_section_index>: New field.
* symfile.c (init_entry_point_info): Find the entry point's
section.
This last patch removes "partial" from the names of
expand_partial_symbol_names and map_partial_symbol_filenames.
It also renames expand_partial_symbol_names to match the
struct quick_symbol_functions "method" that it wraps:
expand_symtabs_matching.
This patch also adds two parameters to expand_symtabs_matching
so that it can fully wrap the underlying quick_symbol_functions method.
This makes it usable in more places.
I thought of having a cover function that still had the same
signature as the old expand_partial_symbol_names function,
but I couldn't think of a good name, and it wasn't clear it was
worth it anyway.
* symfile.h (expand_symtabs_matching): Renamed from
expand_partial_symbol_names. Update prototype.
(map_symbol_filenames): Renamed from map_partial_symbol_filenames.
* symfile.c (expand_symtabs_matching): Renamed from
expand_partial_symbol_names. New args file_matcher, kind.
Rename arg fun to symbol_matcher.
(map_symbol_filenames): Renamed from map_partial_symbol_filenames.
* ada-lang.c (ada_complete_symbol_matcher): Renamed from
ada_expand_partial_symbol_name.
(ada_make_symbol_completion_list): Update to call
expand_symtabs_matching.
(ada_add_global_exceptions): Call expand_symtabs_matching.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
call map_symbol_filenames.
* symtab.c (sources_info): Update to call map_symbol_filenames.
(search_symbols): Call expand_symtabs_matching.
(symbol_completion_matcher): Renamed from expand_partial_symbol_name.
(default_make_symbol_completion_list_break_on): Update to call
expand_symtabs_matching.
(make_source_files_completion_list): Update to call
map_symbol_filenames.
This patch adds two typedefs:
expand_symtabs_file_matcher_ftype
expand_symtabs_symbol_matcher_ftype
It also renames the NAME_MATCHER argument in expand_symtabs_matching.
The function is named expand_symtabs_matching and it takes a name_matcher
argument. Name of what? The symtab? A symbol?
I made it SYMBOL_MATCHER to make it clearer.
* symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
(expand_symtabs_symbol_matcher_ftype): New typedef.
(quick_symbol_functions.expand_symtabs_matching): Update to use.
expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
* symfile.c (expand_partial_symbol_names): Update to use
expand_symtabs_symbol_matcher_ftype.
* dwarf2read.c (dw2_expand_symtabs_matching): Update to use
expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
Arg name_matcher renamed to symbol_matcher.
* psymtab.c (recursively_search_psymtabs): Update to use
expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to
sym_matcher.
(expand_symtabs_matching_via_partial): Update to use
expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
Arg name_matcher renamed to symbol_matcher.
This is the first of a set of three patches to cleanup psymtab.c a bit.
Basically, these two functions do not belong in psymtab.c:
expand_partial_symbol_names, map_partial_symbol_filenames,
and "partial" does not belong in the function name.
This first patch moves them to a better location.
The second patch adds some typedefs for function parameters to
quick_symbol_functions.expand_symtabs_matching.
The third patch removes "partial" from the function names
and uses them in more places.
* psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
(map_partial_symbol_filenames): Ditto.
* psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
(map_partial_symbol_filenames): Ditto.
* symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
(map_partial_symbol_filenames): Ditto.
* symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
(map_partial_symbol_filenames): Ditto.
* symtab.c: Delete #include "psymtab.h".
This removes XCALLOC and replaces it either with XCNEWVEC, or, if the
number of elements being requested was 1, with XCNEW.
2014-01-13 Tom Tromey <tromey@redhat.com>
* defs.h (XCALLOC): Remove.
* bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
(print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
* dwarf2loc.c (allocate_piece_closure): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_symfile_segments): Likewise.
* gdbtypes.c (copy_type_recursive): Likewise.
* i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
* jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
* minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
XCALLOC.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
XCALLOC.
* psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
* regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
* registry.c (registry_alloc_data): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* serial.c (serial_fdopen_ops): Likewise.
* solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
XCALLOC.
* spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
* symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
not XCALLOC.
This makes symtab::filename const and removes a newly unnecessary
cast.
2013-12-06 Tom Tromey <tromey@redhat.com>
* symfile.c (allocate_symtab): Remove cast.
* symtab.h (struct symtab) <filename>: Now const.
This patch is purely mechanical. It removes gdb_stat.h and changes
the code to use sys/stat.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_stat.h: Remove.
* ada-lang.c: Use sys/stat.h, not gdb_stat.h.
* common/filestuff.c: Use sys/stat.h, not gdb_stat.h.
* common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h.
* corefile.c: Use sys/stat.h, not gdb_stat.h.
* ctf.c: Use sys/stat.h, not gdb_stat.h.
* darwin-nat.c: Use sys/stat.h, not gdb_stat.h.
* dbxread.c: Use sys/stat.h, not gdb_stat.h.
* dwarf2read.c: Use sys/stat.h, not gdb_stat.h.
* exec.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h.
* inf-child.c: Use sys/stat.h, not gdb_stat.h.
* jit.c: Use sys/stat.h, not gdb_stat.h.
* linux-nat.c: Use sys/stat.h, not gdb_stat.h.
* m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h.
* main.c: Use sys/stat.h, not gdb_stat.h.
* mdebugread.c: Use sys/stat.h, not gdb_stat.h.
* mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h.
* nto-tdep.c: Use sys/stat.h, not gdb_stat.h.
* objfiles.c: Use sys/stat.h, not gdb_stat.h.
* procfs.c: Use sys/stat.h, not gdb_stat.h.
* remote-fileio.c: Use sys/stat.h, not gdb_stat.h.
* remote-mips.c: Use sys/stat.h, not gdb_stat.h.
* remote.c: Use sys/stat.h, not gdb_stat.h.
* rs6000-nat.c: Use sys/stat.h, not gdb_stat.h.
* sol-thread.c: Use sys/stat.h, not gdb_stat.h.
* solib-spu.c: Use sys/stat.h, not gdb_stat.h.
* source.c: Use sys/stat.h, not gdb_stat.h.
* symfile.c: Use sys/stat.h, not gdb_stat.h.
* symmisc.c: Use sys/stat.h, not gdb_stat.h.
* symtab.c: Use sys/stat.h, not gdb_stat.h.
* top.c: Use sys/stat.h, not gdb_stat.h.
* xcoffread.c: Use sys/stat.h, not gdb_stat.h.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
This patch aims at fixing the following problem, where the user:
. debugs its program
. makes a modification and rebuilds it *without exiting the debugger*
. returns to its debugging session and restarts the inferior
In that situation, the debugger notices that the underlying executable
has changed and that re-reading its symbols is needed. Shortly after
displaying a message informing the user of the situation, GDB crashes:
(gdb) run
[...]
`/[...]/dest' has changed; re-reading symbols.
zsh: 13434922 segmentation fault (core dumped)
The crash occurs while trying to allocate some memory on the bfd_bfd
obstack. But, at some point in time, the whole obstack data gets
corrupted, nullified. So the memory allocation fails trying to call
a function at a NULL address. (side note: when debugging GDB in GDB,
top-gdb reports a SIGILL, while the shell makes it look like it was
a SIGSEGV - the discrepancy is not critical to the investigation
and therefore was not explored)
The corruption occurred because the region where the per_bfd data
got free'ed nearly after it got allocated! This is what happens,
in chronological order (see reread_symbols):
1. GDB notices that the executable has changed, decides to
re-read its symbols.
2. Opens a new bfd, unrefs the old one
3. Calls set_objfile_per_bfd (objfile);
4. Re-initializes the objfile's obstack:
obstack_init (&objfile->objfile_obstack);
I think that the normal behavior for set_objfile_per_bfd would
be to search for already-allocated shared per_bfd data, and
allocate new one if not found. The critical difference between
a platform such as x86_64-linuxe where it works, and ppc-aix,
where it doesn't lies in the fact that bfd-data sharing is not
activated on ppc-aix, and as a result, the per-bfd data gets
allocated on the objfile's obstack instead of in the bfd objalloc:
/* If the object requires gdb to do relocations, we simply fall
back to not sharing data across users. These cases are rare
enough that this seems reasonable. */
if (abfd != NULL && !gdb_bfd_requires_relocations (abfd))
{
storage = bfd_zalloc (abfd, sizeof (struct objfile_per_bfd_storage));
set_bfd_data (abfd, objfiles_bfd_data, storage);
}
else
storage = OBSTACK_ZALLOC (&objfile->objfile_obstack,
struct objfile_per_bfd_storage);
Allocating that per_bfd storage is of course nearly useless since
we end up free-ing right after in step (4) above. Eventually,
the memory region ends up being re-used, hence the corruption
leading to the crash.
This fix was simply to move the call to set_objfile_per_bfd after
the objfile's obstack re-initialization.
gdb/ChangeLog:
* symfile.c (reread_symbols): Move call to set_objfile_per_bfd
after re-initialization of OBJFILE's obstack.
Add the sections of the symbol files that are provided via
'add-symbol-file' to the set of current target sections.
User-added sections are removed upon notification of free_objfile
when their corresponding object file is deleted.
2013-10-29 Nicolas Blanc <nicolas.blanc@intel.com>
* exec.h (add_target_sections_of_objfile): New declaration.
* exec.c (add_target_sections_of_objfile): New function.
* symfile.c (add_symbol_file_command): Update current target sections.
(symfile_free_objfile): New function.
(_initialize_symfile): Register observer for free_objfile events.
Signed-off-by: Nicolas Blanc <nicolas.blanc@intel.com>
New command for removing symbol files added via
the add-symbol-file command.
2013-10-29 Nicolas Blanc <nicolas.blanc@intel.com>
* breakpoint.c (disable_breakpoints_in_freed_objfile): New function.
* objfiles.c (free_objfile): Notify free_objfile.
(is_addr_in_objfile): New function.
* objfiles.h (is_addr_in_objfile): New declaration.
* printcmd.c (clear_dangling_display_expressions): Act upon free_objfile
events instead of solib_unloaded events.
(_initialize_printcmd): Register observer for free_objfile instead
of solib_unloaded notifications.
* solib.c (remove_user_added_objfile): New function.
* symfile.c (remove_symbol_file_command): New command.
(_initialize_symfile): Add remove-symbol-file.
gdb/doc
* observer.texi: New free_objfile event.
Signed-off-by: Nicolas Blanc <nicolas.blanc@intel.com>
This moves the demangled_names_hash from the objfile into the per-BFD
object. This is part of the objfile splitting project.
The demangled names hash is independent of the program space. And, it
is needed by the symbol tables. Both of these things indicate that it
must be pushed into the per-BFD object, which this patch does.
Built and regtested on x86-64 Fedora 18.
* objfiles.c (free_objfile_per_bfd_storage): Delete the
demangled_names_hash.
(free_objfile): Don't delete the demangled_names_hash.
* objfiles.h (struct objfile_per_bfd_storage)
<demangled_names_hash>: New field.
(struct objfile) <demangled_names_hash>: Move to
objfile_per_bfd_storage.
* symfile.c (reread_symbols): Don't delete the
demangled_names_hash.
* symtab.c (create_demangled_names_hash): Update.
(symbol_set_names): Update.
* NEWS: Mention "set debug symfile".
* Makefile.in (SFILES): Add symfile-debug.c.
(COMMON_OBS): Add symfile-debug.o.
* elfread.c (elf_symfile_read): Use objfile_set_sym_fns to set the
objfile's symbol functions.
* objfiles.h (objfile_set_sym_fns): Declare.
* symfile-debug.c: New file.
* symfile.c (syms_from_objfile_1): Use objfile_set_sym_fns to set the
objfile's symbol functions.
(reread_symbols): Ditto.
Pedro Alves
Joel Brobecker
Simon Marchi
Pierre-Marie de Rodat
Gary Benson
Doug Evans
Alexander Klimov
Yao Qi
Doug Evans
Tom Tromey
Markus Metzger
Honggyu Kim
Nicolas Blanc