This is the first of a set of three patches to cleanup psymtab.c a bit.
Basically, these two functions do not belong in psymtab.c:
expand_partial_symbol_names, map_partial_symbol_filenames,
and "partial" does not belong in the function name.
This first patch moves them to a better location.
The second patch adds some typedefs for function parameters to
quick_symbol_functions.expand_symtabs_matching.
The third patch removes "partial" from the function names
and uses them in more places.
* psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
(map_partial_symbol_filenames): Ditto.
* psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
(map_partial_symbol_filenames): Ditto.
* symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
(map_partial_symbol_filenames): Ditto.
* symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
(map_partial_symbol_filenames): Ditto.
* symtab.c: Delete #include "psymtab.h".
__ehdr_start will be defined by assign_file_positions_for_non_load_sections
later.
PR ld/16428
* elf32-i386.c (elf_i386_allocate_dynrelocs): Don't discard relocs
against __ehdr_start.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewise.
PR ld/16428
* elf32-i386.c (elf_i386_allocate_dynrelocs): Don't update reloc
count if there are any non pc-relative relocs.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewise.
RECORD_IS_USED and record_full_open look at current_target.to_stratum
to determine whether a record target is in use. This is wrong because
arch_stratum is greater than record_stratum, so if an arch_stratum
target is pushed, RECORD_IS_USED and record_full_open will miss it.
To fix this, we can use the existing find_record_target instead, which
looks up for a record stratum target across the target stack. Since
that means exporting find_record_target in record.h, RECORD_IS_USED
ends up redundant, so the patch eliminates it.
That exercise then reveals other issues:
- adjust_pc_after_break is gating record_full_... calls based on
RECORD_IS_USED. But, record_full_ calls shouldn't be made when
recording with the record-btrace target. So this adds a new
record_full_is_used predicate to be used in that spot.
- record_full_open says "Process record target already running", even
if the recording target is record-btrace ("process record" is the
original complete name of the record-full target). record_btrace_open
only says "The process is already being recorded." and does not
suggest "record stop", like record-full does. The patch factors out
and merges that error to a new record_preopen function that all record
targets call in their open routine.
Tested on x86_64 Fedora 17.
gdb/
2014-01-14 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* infrun.c (use_displaced_stepping): Use find_record_target
instead of RECORD_IS_USED.
(adjust_pc_after_break): Use record_full_is_used instead of
RECORD_IS_USED.
* record-btrace.c (record_btrace_open): Call record_preopen
instead of checking RECORD_IS_USED.
* record-full.c (record_full_shortname)
(record_full_core_shortname): New globals.
(record_full_is_used): New function.
(find_full_open): Call record_preopen instead of checking
RECORD_IS_USED.
(init_record_full_ops): Set the target's shortname to
record_full_shortname.
(init_record_full_core_ops): Set the target's shortname to
record_full_core_shortname.
* record-full.h (record_full_is_used): Declare.
* record.c (find_record_target): Make extern.
(record_preopen): New function.
* record.h (RECORD_IS_USED): Delete macro.
(find_record_target, record_preopen): Declare functions.
This patch changes the type of 'len' from LONGEST to ULONGEST. 'len'
is the argument of gdbarch methods core_xfer_shared_libraries and
core_xfer_shared_libraries_aix.
gdb:
2014-01-14 Yao Qi <yao@codesourcery.com>
* gdbarch.sh (core_xfer_shared_libraries): Change its argument
'len''s type to ULONGEST.
(core_xfer_shared_libraries_aix): Likewise.
* gdbarch.c, gdbarch.h: Reenerated.
* i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
Change type of 'len' to ULONGEST.
* rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
(rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
Hi,
We can use target_xfer_partial_ftype here for
rs6000_xfer_shared_libraries declaration.
gdb:
2014-01-14 Yao Qi <yao@codesourcery.com>
* rs6000-nat.c (rs6000_xfer_shared_libraries): Use
target_xfer_partial_ftype.
PR python/15464
PR python/16113
* valops.c (value_struct_elt_bitpos): New function
* py-type.c (convert_field): Set 'name' attribute of a gdb.Field
object to 'None' if the field name is an empty string ("").
* python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
attribute to look for a field when 'name' is 'None'.
(get_field_type): New function
testsuite/
* gdb.python/py-type.c: Enhance test case.
* gdb.python/py-value-cc.cc: Likewise
* gdb.python/py-type.exp: Add new tests.
* gdb.python/py-value-cc.exp: Likewise
deprecated_core_resize_section_table is declared but never defined.
This patch removes the stale declaration.
2014-01-13 Tom Tromey <tromey@redhat.com>
* gdbcore.h (deprecated_core_resize_section_table): Remove.
deprecated_flush_hook is declared in defs.h but never defined.
This patch removes the stale declaration.
2014-01-13 Tom Tromey <tromey@redhat.com>
* defs.h (deprecated_flush_hook): Remove.
gdb/
2014-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
PR threads/16216
* linux-thread-db.c (try_thread_db_load): Add parameter
check_auto_load_safe. Move here the file_is_auto_load_safe call.
(try_thread_db_load_from_pdir_1): Move it there from here.
(try_thread_db_load_from_sdir): Update caller.
(try_thread_db_load_from_dir): Move it there from here.
The rules for generating the output register files look like:
amd64.c : $(srcdir)/../regformats/i386/amd64.dat $(regdat_sh)
$(SHELL) $(regdat_sh) $(srcdir)/../regformats/i386/amd64.dat amd64.c
According to this rule, if regdat.sh is newer than amd64.c, then
regdat.sh shall be invoked on amd64.dat. According to regdat.sh, if the
script determines that the output file amd64.c has not changed, then it
will not overwrite the existing output file. This means that a
subsequent invocation of make will trigger the above rule again as
regdat.sh will be perpetually newer than amd64.c.
This then shows up in the make output like so:
/bin/bash ./../regformats/regdat.sh ./../regformats/i386/amd64-linux.dat amd64-linux.c
amd64-linux.c unchanged.
/bin/bash ./../regformats/regdat.sh ./../regformats/i386/amd64-avx-linux.dat amd64-avx-linux.c
amd64-avx-linux.c unchanged.
...
To fix this pathological behavior, it suffices to have regdat.sh
unconditionally rewrite the output register file.
On my machine, which has a regdat.sh file that is newer than some of the
input register files, this change speeds up every invocation of make
under gdb/ by about 5 seconds.
Tries to compile each header in isolation, thus ensuring headers are
self-contained.
Defaults to checking all $HFILES_NO_SRCDIR headers.
Do:
make check-headers CHECK_HEADERS="header.h list.h"
to check specific headers.
gdb/
2014-01-13 Pedro Alves <palves@redhat.com>
* Makefile.in (CHECK_HEADERS): New variable.
(check-headers:): New rule.
This removes deprecated_set_hook. Insight was the last user of this
hook, but I recently checked in a patch to have it use the
command_param_changed observer instead.
2014-01-13 Tom Tromey <tromey@redhat.com>
* cli/cli-setshow.c (do_set_command): Update.
* defs.h (deprecated_set_hook): Remove.
* top.c (deprecated_set_hook): Remove.
This PC guessing can't work when the PC is a pseudo-register.
Pseudo-register values don't end up stored in the regcache, they're
always recomputed. And, it's actually wrong to try to write a
pseudo-register with regcache_raw_supply. Skip it and add a comment.
gdb/
2014-01-13 Pedro Alves <palves@redhat.com>
* tracepoint.c (tfile_fetch_registers): Don't infer the PC from
the tracepoint if the PC is a pseudo-register.
This removes XCALLOC and replaces it either with XCNEWVEC, or, if the
number of elements being requested was 1, with XCNEW.
2014-01-13 Tom Tromey <tromey@redhat.com>
* defs.h (XCALLOC): Remove.
* bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
(print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
* dwarf2loc.c (allocate_piece_closure): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_symfile_segments): Likewise.
* gdbtypes.c (copy_type_recursive): Likewise.
* i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
* jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
* minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
XCALLOC.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
XCALLOC.
* psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
* regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
* registry.c (registry_alloc_data): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* serial.c (serial_fdopen_ops): Likewise.
* solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
XCALLOC.
* spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
* symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
not XCALLOC.
On powerpc32, making ifuncs have non-default visibility in shared
libraries or pies can result in runtime failures. The problem is that
if gcc is told that a given function has non-default visibility, then
calls to that function are assumed to be local (which is true) and
thus need not go via a plt call stub (which is false for ifunc). If
the caller has no other reason to set up the got pointer (r30), code
won't be emitted to do so. However, a pic plt call stub makes use of
r30 to load the plt entry. So a call to an ifunc, which always needs
a plt entry, will fail.
This patch makes ld emit an error for the problem case, and allows
calls to non-default visibility ifuncs to work in normal executables.
I also fix some cases where ifuncs fail when using the old bss-plt.
* elf32-ppc.c (ppc_elf_check_relocs): For @local call to ifunc,
error when shared and force a plt call otherwise.
(ppc_elf_size_dynamic_sections): Don't emit DT_PPC_GOT unless
plt_type == PLT_NEW.
(ppc_elf_relocate_section): Add missing test to resolve ifuncs to
the appropriate call stub.
This patch reorganizes code on gdb/i386-tdep.c's SystemTap SDT probe
support functions. Before it, the code to parse special operands on x86
lived in a single, big function. This patch creates 2 new functions
that makes the code more organized and removes a few indentation levels
(which is always good IMO).
I haven't modified anything logical in the functions, i.e., there's still
one latent bug on i386_stap_parse_special_token_triplet now. I will soon
post a patch to fix this, and to also improve the readability of the two
new functions.
2014-01-12 Sergio Durigan Junior <sergiodj@redhat.com>
* i386-tdep.c (i386_stap_parse_special_token_triplet): New
function, with code from i386_stap_parse_special_token.
(i386_stap_parse_special_token_three_arg_disp): Likewise.
(i386_stap_parse_special_token): Move code to the two functions
above; simplify it.
gdb/doc/
2014-01-10 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Your Program's Environment) <set environment>:
Mention the shell, and point at 'set exec-wrapper'.
S390, the dw2-dir-file-name test case fails in the first
gdb_continue_to_breakpoint. Indeed, the breakpoint is now placed into
the alignment gap *before* the actual function.
This happens because the test case declares the respective "*_start"
symbol as a "loose" label before the function definition, and the
compiler inserts the alignment between that label and the function
itself.
The "*_start" symbols were only necessary because FUNC made the
function static. The fix makes the functions extern instead, thus
making the "*_start" labels unnecessary.
testsuite/
2014-01-10 Andreas Arnez <arnez@linux.vnet.ibm.com>
Pedro Alves <palves@redhat.com>
* gdb.dwarf2/dw2-dir-file-name.c (FUNC): Remove "*_start" symbol.
Make "name" extern.
* gdb.dwarf2/dw2-dir-file-name.exp (out_cu, out_line): Replace
references to ${name}_start by references to ${name}.
A live target is required for `-info-os' to work in non-native
configurations.
(gdb)
Expecting: ^(-info-os[
]+)?(.*\^done,OSDataTable=.*[
]+[(]gdb[)]
[ ]*)
-info-os
^error,msg="Don't know how to get OS data. Try \"help target\"."
(gdb)
FAIL: gdb.mi/mi-info-os.exp: -info-os
If GDB does have a native configuration included, but we're testing
remote, it'll be worse, as if we're not connected yet, -info-os will
run against the default run target, and pass, falsely giving the
impression the remote bits were exercised.
gdb/testsuite/
2014-01-09 Maciej W. Rozycki <macro@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdb.mi/mi-info-os.exp: Connect to the target with
mi_gdb_target_load.
Although we can tell upfront whether a remote target supports target
side commands, we can only tell whether the target supports that in
combination with a given breakpoint kind (software, hardware,
watchpoints, etc.) when we go and try to insert such a breakpoint kind
the first time. It's not desirable to make remote_insert_breakpoint
simply return -1 in this case, because if the breakpoint was set in a
shared library, insert_bp_location will assume that the breakpoint
insertion failed because the library wasn't mapped in.
insert_bp_location already handles errors/exceptions thrown from the
target_insert_xxx methods, exactly so the backend can tell the user
the detailed reason the insertion of hw breakpoints failed. But, in
the case of software breakpoints, it discards the detailed error
message.
So the patch makes insert_bp_location use the error's message for SW
breakpoints too, and, introduces a NOT_SUPPORTED_ERROR error code so
that insert_bp_location doesn't confuse the error for failure due to a
shared library disappearing.
The result is:
(gdb) c
Warning:
Cannot insert breakpoint 2: Target doesn't support breakpoints that have target side commands.
2014-01-09 Pedro Alves <palves@redhat.com>
Hui Zhu <hui@codesourcery.com>
PR gdb/16101
* breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
bp_err_string. Don't mark the location shlib_disabled if the
error thrown wasn't a generic or memory error. Catch errors
thrown while inserting breakpoints in overlayed code. Output
error message of software breakpoints.
* remote.c (remote_insert_breakpoint): If this breakpoint has
target-side commands but this stub doesn't support Z0 packets,
throw NOT_SUPPORTED_ERROR error.
* exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
* target.h (target_insert_breakpoint): Extend comment.
(target_insert_hw_breakpoint): Add comment.
bfd/
2014-01-09 Tristan Gingold <gingold@adacore.com>
* coff-rs6000.c (rs6000coff_vec, pmac_xcoff_vec): use jump
table macros and add macros to initializa the structure.
