* dwarf2cfi.c (cfi_write_fp): Document as not used.
* mips-tdep.c (mips_gdbarch_init): Do not set write_fp.
* ia64-tdep.c (ia64_gdbarch_init): Do not set write_fp.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Do not set write_fp.
* rs6000-tdep.c (rs6000_gdbarch_init): Do not set write_fp.
* s390-tdep.c (s390_gdbarch_init): Do not set write_fp.
(s390_write_fp):
* sh-tdep.c (sh_gdbarch_init): Do not set write_fp.
* x86-64-tdep.c (i386_gdbarch_init): Do not set write_fp.
* d10v-tdep.c (d10v_gdbarch_init): Do not set write_fp.
(d10v_write_fp): Delete function.
* inferior.h (write_fp, generic_target_write_fp): Delete
declarations.
* regcache.c (generic_target_write_fp): Delete function.
(write_fp): Delete function.
* gdbarch.sh (TARGET_WRITE_FP): Delete.
* gdbarch.h, gdbarch.c: Regenerate.
* config/v850/tm-v850.h (TARGET_WRITE_FP): Delete macro.
* config/sparc/tm-sp64.h (TARGET_WRITE_FP): Delete macro.
(sparc64_write_fp): Delete declaration.
* config/h8500/tm-h8500.h (TARGET_WRITE_FP): Delete macro.
(h8500_write_fp): Delete declaration.
* gdbarch.c gdbarch.h: Regenerate.
* breakpoint.c (create_longjmp_breakpoint): Always compile this
function.
(breakpoint_reset): Test GET_LONGJMP_TARGET_P().
* infrun.c (GET_LONGJMP_TARGET): Delete default definition.
(handle_inferior_event): Test GET_LONGJMP_TARGET_P().
* arm-tdep.h (struct gdbarch_tdep): Add jb_pc and jb_elt_size fields.
* arm-tdep.c (arm_get_longjmp_target): New function.
(arm_gdbarch_init): Initialize jb_pc to -1. If ABI handler changes
this to a positive value register arm_get_longjmp_target as the
longjmp handler.
* arm-linux-tdep.c (arm_get_longjmp_target): Delete.
(arm_linux_init_abi): Set up longjmp description in tdep.
* armnbsd-nat.c (get_longjmp_target): Delete.
* armnbsd-tdep.c (arm_netbsd_init_abi_common): Set up longjmp
description in tdep.
* config/arm/tm-nbsd.h (JB_ELEMENT_SIZE, JB_PC): Delete.
(get_longjmp_target): Delete declaration.
(GET_LONGJMP_TARGET): Delete.
* config/arm/tm-linux.h (arm_get_longjmp_target): Delete declaration.
(GET_LONGJMP_TARGET): Delete.
* gdbarch.sh: Add definitions for COFF_MAKE_MSYMBOL_SPECIAL and
ELF_MAKE_MSYMBOL_SPECIAL.
* gdbarch.c, gdbarch.h: Regenerate.
* arch-utils.c (default_elf_make_msymbol_special,
default_coff_make_msymbol_special): New functions.
* arch-utils.h (default_elf_make_msymbol_special,
default_coff_make_msymbol_special): Export.
* elfread.c (elf_symtab_read): Compile use of
ELF_MAKE_MSYMBOL_SPECIAL unconditionally because it is now
multiarched.
* coffread.c (coff_symtab_read): Ditto, for
COFF_MAKE_MSYMBOL_SPECIAL.
against BFD_ENDIAN_UNKNOWN.
(gdbarch_info_init): Initialize byte_order to BFD_ENDIAN_UNKNOWN.
* gdbarch.sh: Update comments on default value of byte_order.
(verify_gdbarch, gdbarch_update_p): Test byte_order against
BFD_ENDIAN_UNKNOWN.
* gdbarch.h, gdbarch.c: Re-generate.
* gdbarch.c, gdbarch.h: Regenerated.
* gdbtypes.c (build_gdbtypes): If TARGET_CHAR_SIGNED is zero,
set the TYPE_FLAG_UNSIGNED bit on the type.
* s390-tdep.c (s390_gdbarch_init): On the S/390, characters
are unsigned by default.
* rs6000-tdep.c (rs6000_gdbarch_init): Same for PowerPC and
RS6000.
* arch-utils.h (generic_in_function_epilogue_p): Declare extern.
* breakpoint.c (watchpoint_check): Add test whether the pc is
currently in the epilogue of a function.
* gdbarch.c: Autogenerated from gdbarch.sh.
* gdbarch.h: Ditto.
* gdbarch.sh (function_list): Add `in_function_epilogue_p' definition.
longer disagree on how big pointers are.
* findvar.c (value_from_register): Remove special case code for D10V.
* printcmd.c (print_frame_args): Same.
* valops.c (value_at, value_fetch_lazy): Same.
* values.c (unpack_long): Same.
* gdbarch.sh: Changes to effect the following:
* gdbarch.h (GDB_TARGET_IS_D10V, D10V_MAKE_DADDR,
gdbarch_d10v_make_daddr_ftype, gdbarch_d10v_make_daddr,
set_gdbarch_d10v_make_daddr, D10V_MAKE_IADDR,
gdbarch_d10v_make_iaddr_ftype, gdbarch_d10v_make_iaddr,
set_gdbarch_d10v_make_iaddr, D10V_DADDR_P,
gdbarch_d10v_daddr_p_ftype, gdbarch_d10v_daddr_p,
set_gdbarch_d10v_daddr_p, D10V_IADDR_P,
gdbarch_d10v_iaddr_p_ftype, gdbarch_d10v_iaddr_p,
set_gdbarch_d10v_iaddr_p, D10V_CONVERT_DADDR_TO_RAW,
gdbarch_d10v_convert_daddr_to_raw_ftype,
gdbarch_d10v_convert_daddr_to_raw,
set_gdbarch_d10v_convert_daddr_to_raw, D10V_CONVERT_IADDR_TO_RAW,
gdbarch_d10v_convert_iaddr_to_raw_ftype,
gdbarch_d10v_convert_iaddr_to_raw,
set_gdbarch_d10v_convert_iaddr_to_raw): Delete declarations.
* gdbarch.c: Delete the corresponding definitions.
(struct gdbarch): Delete members d10v_make_daddr,
d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p,
d10v_convert_daddr_to_raw, and d10v_convert_iaddr_to_raw.
(startup_gdbarch): Remove initializers for the above.
(verify_gdbarch, gdbarch_dump): Don't verify or dump them any
more.
* d10v-tdep.c (d10v_register_virtual_type): Rather that
claiming the stack pointer and PC are 32 bits long (which they
aren't), say that the stack pointer is an int16_t, and the
program counter is a function pointer. This allows the rest
of GDB to make the appropriate conversions between the code
pointer format and real addresses.
(d10v_register_convertible, d10v_register_convert_to_virtual,
d10v_register_convert_to_raw): Delete function; no registers
are convertible now, so we use
generic_register_convertible_not instead.
(d10v_address_to_pointer, d10v_pointer_to_address): New gdbarch
methods.
(d10v_push_arguments, d10v_extract_return_value): Remove special
cases for code and data pointers.
(d10v_gdbarch_init): Set gdbarch_ptr_bit to 16, so that GDB and
the target agree on how large pointers are. Say that addresses
are 32 bits long. Register the address_to_pointer and
pointer_to_address conversion functions. Since no registers are
convertible now, register generic_register_convertible_not as the
gdbarch_register_convertible method instead of
d10v_register_convertible. Remove registrations for
d10v_register_convert_to_virtual,
d10v_register_convert_to_raw, gdbarch_d10v_make_daddr,
gdbarch_d10v_make_iaddr, gdbarch_d10v_daddr_p,
gdbarch_d10v_iaddr_p, gdbarch_d10v_convert_daddr_to_raw, and
gdbarch_d10v_convert_iaddr_to_raw.
definitions. Generate an error when both pure multi-arch and
"tm.h".
* gdbarch.h, gdbarch.c: Regenerate.
* defs.h (GDB_MULTI_ARCH_TM): Rewrite definition.
(EXTRACT_STRUCT_VALUE_ADDRESS): Change to a function with
predicate.
* gdbarch.h, gdbarch.c: Regenerate.
* values.c (value_being_returned): Change the reference to
EXTRACT_STRUCT_VALUE_ADDRESS_P to a function call.
* arch-utils.c (default_prepare_to_proceed)
(generic_prepare_to_proceed): Added new functions.
* arch-utils.h: New function declarations for
default_prepare_to_proceed() and generic_prepare_to_proceed().
* gdbarch.sh: Added PREPARE_TO_PROCEED.
* gdbarch.c: Regenerated.
* gdbarch.h: Regenerated.
* inferior.h: Added get_last_target_status() declaration.
* infrun.c (get_last_target_status): Added new function.
(handle_inferior_event): Saves last pid and waitstatus, which will
get returned by get_last_target_status().
* hppa-tdep.c (prepare_to_proceed): Added comment stating that
prepare_to_proceed() is potentially redundant since
default_prepare_to_proceed() has been added.
* linux-thread.c (prepare_to_proceed): Ditto.
* lin-lwp.c (prepare_to_proceed): Ditto.
* m3-nat.c (prepare_to_proceed): Ditto.
