2006-06-23 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (cpu_arch_tune_set): New.
(cpu_arch_isa): Likewise.
(i386_align_code): Use xchg %ax,%ax for 2 byte nop. Optimize
nops with short or long nop sequences based on -march=/.arch
and -mtune=.
(set_cpu_arch): Set cpu_arch_isa. If cpu_arch_tune_set is 0,
set cpu_arch_tune and cpu_arch_tune_flags.
(md_parse_option): For -march=, set cpu_arch_isa and set
cpu_arch_tune and cpu_arch_tune_flags if cpu_arch_tune_set is
0. Set cpu_arch_tune_set to 1 for -mtune=.
(i386_target_format): Don't set cpu_arch_tune.
gas/testsuite/
2006-06-23 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run nops-1, nops-1-i386, nops-1-i686,
nops-1-merom, nops-2, nops-2-i386, nops-2-merom, x86-64-nops-1,
x86-64-nops-1-k8, x86-64-nops-1-nocona and x86-64-nops-1-merom.
* gas/i386/nops-1.s: New file.
* gas/i386/nops-2.s: Likewise.
* gas/i386/nops-1-i386.d: Likewise.
* gas/i386/nops-1-i686.d: Likewise.
* gas/i386/nops-1-merom.d: Likewise.
* gas/i386/nops-1.d: Likewise.
* gas/i386/nops-2-i386.d: Likewise.
* gas/i386/nops-2-merom.d: Likewise.
* gas/i386/nops-2.d: Likewise.
* gas/i386/x86-64-nops-1.s: Likewise.
* gas/i386/x86-64-nops-1-k8.d: Likewise.
* gas/i386/x86-64-nops-1-merom.d: Likewise.
* gas/i386/x86-64-nops-1-nocona.d: Likewise.
* gas/i386/x86-64-nops-1.d: Likewise.
* gas/i386/sse2.d: Updated to expect xchg %ax,%ax as 2 byte
nop.
to R_ARM_LDC_SB_G{0,1,2} respectively.
bfd/
* bfd-in2.h: Regenerate.
* elf32-arm.c (R_ARM_ALU_PC_G0_NC, R_ARM_ALU_PC_G0,
R_ARM_ALU_PC_G1_NC, R_ARM_ALU_PC_G1, R_ARM_ALU_PC_G2,
R_ARM_LDR_PC_G1, R_ARM_LDR_PC_G2, R_ARM_LDRS_PC_G0,
R_ARM_LDRS_PC_G1, R_ARM_LDRS_PC_G2, R_ARM_LDC_PC_G0,
R_ARM_LDC_PC_G1, R_ARM_LDC_PC_G2, R_ARM_ALU_SB_G0_NC,
R_ARM_ALU_SB_G0, R_ARM_ALU_SB_G1_NC, R_ARM_ALU_SB_G1,
R_ARM_ALU_SB_G2, R_ARM_LDR_SB_G0, R_ARM_LDR_SB_G1,
R_ARM_LDR_SB_G2, R_ARM_LDRS_SB_G0, R_ARM_LDRS_SB_G1,
R_ARM_LDRS_SB_G2, R_ARM_LDC_SB_G0, R_ARM_LDC_SB_G1,
R_ARM_LDC_SB_G2): New relocation types.
(R_ARM_PC13): Rename to AAELF name R_ARM_LDR_PC_G0 and
adjust HOWTO entry to be consistent with R_ARM_LDR_PC_G1
and friends.
(elf32_arm_howto_table_3): Delete; contents merged into
elf32_arm_howto_table_2.
(elf32_arm_howto_from_type): Adjust correspondingly.
(elf32_arm_reloc_map): Extend with the above relocations.
(calculate_group_reloc_mask): New function.
(identify_add_or_sub): New function.
(elf32_arm_final_link_relocate): Support for the above
relocations.
* reloc.c: Add enumeration entries for BFD_RELOC_ARM_...
codes to correspond to the above relocations.
gas/
* config/tc-arm.c (enum parse_operand_result): New.
(struct group_reloc_table_entry): New.
(enum group_reloc_type): New.
(group_reloc_table): New array.
(find_group_reloc_table_entry): New function.
(parse_shifter_operand_group_reloc): New function.
(parse_address_main): New function, incorporating code
from the old parse_address function. To be used via...
(parse_address): wrapper for parse_address_main; and
(parse_address_group_reloc): new function, likewise.
(enum operand_parse_code): New codes OP_SHG, OP_ADDRGLDR,
OP_ADDRGLDRS, OP_ADDRGLDC.
(parse_operands): Support for these new operand codes.
New macro po_misc_or_fail_no_backtrack.
(encode_arm_cp_address): Preserve group relocations.
(insns): Modify to use the above operand codes where group
relocations are permitted.
(md_apply_fix): Handle the group relocations
ALU_PC_G0_NC through LDC_SB_G2.
(tc_gen_reloc): Likewise.
(arm_force_relocation): Leave group relocations for the linker.
(arm_fix_adjustable): Likewise.
gas/testsuite/
* gas/arm/group-reloc-alu.d: New test.
* gas/arm/group-reloc-alu-encoding-bad.d: New test.
* gas/arm/group-reloc-alu-encoding-bad.l: New test.
* gas/arm/group-reloc-alu-encoding-bad.s: New test.
* gas/arm/group-reloc-alu-parsing-bad.d: New test.
* gas/arm/group-reloc-alu-parsing-bad.l: New test.
* gas/arm/group-reloc-alu-parsing-bad.s: New test.
* gas/arm/group-reloc-alu.s: New test.
* gas/arm/group-reloc-ldc.d: New test.
* gas/arm/group-reloc-ldc-encoding-bad.d: New test.
* gas/arm/group-reloc-ldc-encoding-bad.l: New test.
* gas/arm/group-reloc-ldc-encoding-bad.s: New test.
* gas/arm/group-reloc-ldc-parsing-bad.d: New test.
* gas/arm/group-reloc-ldc-parsing-bad.l: New test.
* gas/arm/group-reloc-ldc-parsing-bad.s: New test.
* gas/arm/group-reloc-ldc.s: New test.
* gas/arm/group-reloc-ldr.d: New test.
* gas/arm/group-reloc-ldr-encoding-bad.d: New test.
* gas/arm/group-reloc-ldr-encoding-bad.l: New test.
* gas/arm/group-reloc-ldr-encoding-bad.s: New test.
* gas/arm/group-reloc-ldr-parsing-bad.d: New test.
* gas/arm/group-reloc-ldr-parsing-bad.l: New test.
* gas/arm/group-reloc-ldr-parsing-bad.s: New test.
* gas/arm/group-reloc-ldr.s: New test.
* gas/arm/group-reloc-ldrs.d: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.d: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.l: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.s: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.d: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.l: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.s: New test.
* gas/arm/group-reloc-ldrs.s: New test.
ld/testsuite/
* ld-arm/group-relocs-alu-bad.d: New test.
* ld-arm/group-relocs-alu-bad.s: New test.
* ld-arm/group-relocs.d: New test.
* ld-arm/group-relocs-ldc-bad.d: New test.
* ld-arm/group-relocs-ldc-bad.s: New test.
* ld-arm/group-relocs-ldr-bad.d: New test.
* ld-arm/group-relocs-ldr-bad.s: New test.
* ld-arm/group-relocs-ldrs-bad.d: New test.
* ld-arm/group-relocs-ldrs-bad.s: New test.
* ld-arm/group-relocs.s: New test.
* ld-arm/arm-elf.exp: Wire in new tests.
2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run nops and x86-64-nops.
* gas/i386/nops.d: New file.
* gas/i386/nops.s: Likewise.
* gas/i386/x86-64-nops.d: Likewise.
* gas/i386/x86-64-nops.s: Likewise.
include/opcode/
2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Add "nop" with memory reference.
opcodes/
2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (dis386_twobyte): Use "nopQ" for 0x1f.
(twobyte_has_modrm): Set 1 for 0x1f.
* config/tc-mips.c (mips_ip): Maintain argument count.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-sf32.s, gas/mips/mips32-sf32.d: New test for odd
single precision FPRs on MIPS32.
* gas/mips/mips.exp: Run them.
blocks.
* gas/arm/neon-cond-bad-inc.s: New test. Make sure unconditional
Neon instructions are rejected...
* gas/arm/neon-cond-bad.s: In ARM mode, and...
* gas/arm/neon-cond-bad_t2.s: Accepted in Thumb mode (with IT).
* gas/arm/neon-cond-bad.l: Expected error output in ARM mode.
* gas/arm/neon-cond-bad.d: Control ARM mode test.
* gas/arm/neon-cond-bad_t2.d: Expected output in Thumb mode.
* gas/arm/vfp-neon-syntax-inc.s: Test VFP Neon-style syntax.
* gas/arm/vfp-neon-syntax.s: ...in ARM mode.
* gas/arm/vfp-neon-syntax_t2.s: ...and Thumb mode.
* gas/arm/vfp-neon-syntax.d: Expected output in ARM mode.
* gas/arm/vfp-neon-syntax_t2.d: Expected output in Thumb mode.
* config/tc-mips.c (macro_build): Use INSERT_OPERAND wherew
appropriate.
(mips16_macro_build): Use MIPS16_INSERT_OPERAND where appropriate.
(mips_ip): Make overflowed/underflowed constant arguments in DSP
and MT instructions a fatal error. Use INSERT_OPERAND where
appropriate. Improve warnings for break and wait code overflows.
Use symbolic constant of OP_MASK_COPZ.
(mips16_ip): Use MIPS16_INSERT_OPERAND where appropriate.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dsp.d, gas/mips/mips32-dsp.s, gas/mips/mips32-mt.d,
gas/mips/mips32-mt.s: Remove instructions with invalid arguments.
* gas/mips/mips32-dsp.l, gas/mips/mips32-mt.l: Delete file.
[ include/opcode/ChangeLog ]
* mips.h: Improve description of MT flags.
* m68k.h (mcf_mask): Define.
opcodes/
* m68k-opc.c (m68k_opcodes): Fix the masks of the Coldfire fmovemd
and fmovem entries. Put register list entries before immediate
mask entries. Use "l" rather than "L" in the fmovem entries.
* m68k-dis.c (match_insn_m68k): Remove the PRIV argument and work it
out from INFO.
(m68k_scan_mask): New function, split out from...
(print_insn_m68k): ...here. If no architecture has been set,
first try printing an m680x0 instruction, then try a Coldfire one.
gas/testsuite/
* gas/m68k/mcf-fpu.s: Add fmovemd and fmovem instructions.
* gas/m68k/mcf-fpu.d: Adjust accordingly.
* config/tc-mips.c (ISA_SUPPORTS_SMARTMIPS): Rename.
(ISA_SUPPORTS_DSP_ASE, ISA_SUPPORTS_MT_ASE, ISA_HAS_64BIT_FPRS,
ISA_HAS_MXHC1): New macros.
(HAVE_32BIT_FPRS): Use ISA_HAS_64BIT_FPRS instead of
ISA_HAS_64BIT_REGS. Formatting fixes. Improved comments.
(mips_cpu_info): Change to use combined ASE/IS_ISA flag.
(MIPS_CPU_IS_ISA, MIPS_CPU_ASE_SMARTMIPS, MIPS_CPU_ASE_DSP,
MIPS_CPU_ASE_MT, MIPS_CPU_ASE_MIPS3D, MIPS_CPU_ASE_MDMX): New defines.
(mips_after_parse_args): Change default handling of float register
size to account for 32bit code with 64bit FP. Better sanity checking
of ISA/ASE/ABI option combinations.
(s_mipsset): Support switching of GPR and FPR sizes via
.set {g,f}p={32,64,default}. Better sanity checking for .set ASE
options.
(mips_elf_final_processing): We should record the use of 64bit FP
registers in 32bit code but we don't, because ELF header flags are
a scarce ressource.
(mips_cpu_info_table): Add ASE flags for CPUs with mandatory ASE
extensions. Add 4ksc, 4kec, 4kem, 4kep, 4ksd, m4kp, 24kec, 24kef,
24kex, 34kc, 34kf, 34kx, 25kf CPU definitions.
(mips_cpu_info_from_isa): Use MIPS_CPU_IS_ISA.
* doc/c-mips.texi: Document .set {g,f}p={32,64,default}. Document
missing -march options. Document .set arch=CPU. Move .set smartmips
to ASE page. Use @code for .set FOO examples.
[ gas/testsuite/Changelog ]
* gas/mips/mips-gp32-fp64-pic.d, mips/mips-gp32-fp64.d,
gas/mips/mips-gp64-fp32-pic.d, gas/mips/mips-gp64-fp32.l,
gas/mips/mips-gp64-fp64.d: Adjust test cases to the changes assembler
output.
* gas/mips/mips-gp32-fp64.l, gas/mips/mips-gp64-fp32-pic.l: New files,
catch assembler warnings.
* config/tc-mips.c (macro_build): Test for currently active
mips16 option.
(mips16_ip): Reject invalid opcodes.
[ opcodes/ChangeLog ]
* mips16-opc.c (I1, I32, I64): New shortcut defines.
(mips16_opcodes): Change membership of instructions to their
lowest baseline ISA.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips.exp: Run new tests.
* gas/mips/mips16e.s, gas/mips/mips16e.d, gas/mips/mips16e-64.s,
gas/mips/mips16e-64.d, gas/mips/mips16e-64.l: New tests.
gas/
* config/tc-arm.c (arm_fix_adjustable): Return 0 for function symbols.
gas/testsuite/
* gas/arm/local_function.d: New test.
* gas/arm/local_function.s: New test.
* config/tc-mips.c (append_insn): Don't check the range of j or
jal addresses.
[ gas/testsuite/ChangeLog ]
* gas/mips/jal-range.l: Don't check the range of j or jal
addresses.
* config/tc-mips.c (append_insn): Only warn about an out-of-range
j or jal address.
[ gas/testsuite/ChangeLog ]
* gas/mips/jal-range.l: Only warn about an out-of-range j or jal
address.
here.
(md_apply_fix3): Multiply offset by 4 here for
BFD_RELOC_ARM_CP_OFF_IMM_S2 and BFD_RELOC_ARM_T32_CP_OFF_IMM_S2.
testsuite:
* gas/arm/iwmmxt.s: Increase offsets for wstrb and wstrh.
* gas/arm/iwmmxt.d: Update expected results.
* gas/arm/iwmmxt-bad2.s: Test wstrb, wstrh, wldrb and wldrh.
* gas/arm/iwmmxt-bad2.l: Update expected error messages.
* gas/arm/copro.d: Update accordingly.
* gas/arm/neon-cond.s: New test. Conditional Neon opcodes in ARM mode.
* gas/arm/neon-cond.d: Expected results of above.
* gas/arm/neon-cov.s: New test. Coverage of Neon instructions.
* gas/arm/neon-cov.d: Expected results of above.
* gas/arm/neon-ldst-es.s: New test. Element and structure loads and
stores.
* gas/arm/neon-ldst-es.d: Expected results of above.
* gas/arm/neon-ldst-rm.s: New test. Single and multiple register loads
and stores.
* gas/arm/neon-ldst-rm.d: Expected results of above.
* gas/arm/neon-omit.s: New test. Omission of optional operands.
* gas/arm/neon-omit.d: Expected results of above.
* gas/arm/vfp1.d: Expect Neon syntax for some VFP instructions.
* gas/arm/vfp1_t2.d: Likewise.
* gas/arm/vfp1xD.d: Likewise.
* gas/arm/vfp1xD_t2.d: Likewise.
* gas/arm/vfp2.d: Likewise.
* gas/arm/vfp2_t2.d: Likewise.
* gas/arm/vfp3-32drs.s: New test. Extended D register range for VFP
instructions.
* gas/arm/vfp3-32drs.d: Expected results of above.
* gas/arm/vfp3-const-conv.s: New test. VFPv3 constant-load and
conversion instructions.
* gas/arm/vfp3-const-conv.d: Expected results of above.
Daniel Jacobowitz <dan@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Zack Weinberg <zack@codesourcery.com>
Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
bfd/
* bfd-in2.h: Regenerate.
* config.bfd (mips*-*-vxworks*, mips*el-*-vxworks*): New stanzas.
* configure.in (bfd_elf32_bigmips_vxworks_vec): New stanza.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(bfd_elf32_bigmips_vec): Add elf-vxworks.lo.
(bfd_elf32_littlemips_vec): Likewise.
(bfd_elf32_nbigmips_vec): Likewise.
(bfd_elf32_nlittlemips_vec): Likewise.
(bfd_elf32_ntradbigmips_vec): Likewise.
(bfd_elf32_ntradlittlemips_vec): Likewise.
(bfd_elf32_tradbigmips_vec): Likewise.
(bfd_elf32_tradlittlemips_vec): Likewise.
(bfd_elf64_bigmips_vec): Likewise.
(bfd_elf64_littlemips_vec): Likewise.
(bfd_elf64_tradbigmips_vec): Likewise.
(bfd_elf64_tradlittlemips_vec): Likewise.
* elf32-mips.c: Include elf-vxworks.h.
(mips_info_to_howto_rel): Use elf_backend_mips_rtype_to_howto
instead of calling mips_elf32_rtype_to_howto directly.
(mips_vxworks_copy_howto_rela): New reloc howto.
(mips_vxworks_jump_slot_howto_rela): Likewise.
(mips_vxworks_bfd_reloc_type_lookup): New function.
(mips_vxworks_rtype_to_howto): Likewise.
(mips_vxworks_final_write_processing): Likewise.
(TARGET_LITTLE_SYM, TARGET_LITTLE_NAME): Override for VxWorks.
(TARGET_BIG_SYM, TARGET_BIG_NAME, elf_bed, ELF_MAXPAGESIZE): Likewise.
(elf_backend_want_got_plt): Likewise.
(elf_backend_want_plt_sym): Likewise.
(elf_backend_got_symbol_offset): Likewise.
(elf_backend_want_dynbss): Likewise.
(elf_backend_may_use_rel_p): Likewise.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_got_header_size: Likewise.
(elf_backend_plt_readonly): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Likewise.
(elf_backend_mips_rtype_to_howto): Likewise.
(elf_backend_adjust_dynamic_symbol): Likewise.
(elf_backend_finish_dynamic_symbol): Likewise.
(bfd_elf32_bfd_link_hash_table_create): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing: Likewise.
(elf_backend_additional_program_headers): Likewise.
(elf_backend_modify_segment_map): Likewise.
(elf_backend_symbol_processing): Likewise.
* elfxx-mips.c: Include elf-vxworks.h.
(mips_elf_link_hash_entry): Add is_relocation_target and
is_branch_target fields.
(mips_elf_link_hash_table): Add is_vxworks, srelbss, sdynbss, srelplt,
srelplt2, sgotplt, splt, plt_header_size and plt_entry_size fields.
(MIPS_ELF_RELA_SIZE, MIPS_ELF_REL_DYN_NAME): New macros.
(MIPS_RESERVED_GOTNO): Take a mips_elf_link_hash_table argument.
Return 3 for VxWorks.
(ELF_MIPS_GP_OFFSET): Change the argument from a bfd to a
mips_elf_link_hash_table. Return 0 for VxWorks.
(MIPS_ELF_GOT_MAX_SIZE): Change the argument from a bfd to a
mips_elf_link_hash_table. Update the call to ELF_MIPS_GP_OFFSET.
(mips_vxworks_exec_plt0_entry): New variable.
(mips_vxworks_exec_plt_entry): Likewise.
(mips_vxworks_shared_plt0_entry): Likewise.
(mips_vxworks_shared_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize the new hash_entry fields.
(mips_elf_rel_dyn_section): Change the bfd argument to a
mips_elf_link_hash_table. Use MIPS_ELF_REL_DYN_NAME to get
the name of the section.
(mips_elf_initialize_tls_slots): Update the call to
mips_elf_rel_dyn_section.
(mips_elf_gotplt_index): New function.
(mips_elf_local_got_index): Add an input_section argument.
Update the call to mips_elf_create_local_got_entry.
(mips_elf_got_page): Likewise.
(mips_elf_got16_entry): Likewise.
(mips_elf_create_local_got_entry): Add bfd_link_info and input_section
arguments. Create dynamic relocations for each entry on VxWorks.
(mips_elf_merge_gots): Update the use of MIPS_ELF_GOT_MAX_SIZE.
(mips_elf_multi_got): Update the uses of MIPS_ELF_GOT_MAX_SIZE
and MIPS_RESERVED_GOTNO.
(mips_elf_create_got_section): Update the uses of
MIPS_ELF_GOT_MAX_SIZE. Create .got.plt on VxWorks.
(is_gott_symbol): New function.
(mips_elf_calculate_relocation): Use a dynobj local variable.
Update the calls to mips_elf_local_got_index, mips_elf_got16_entry and
mips_elf_got_page_entry. Set G to the .got.plt entry when calculating
VxWorks R_MIPS_CALL* relocations. Calculate and use G for all GOT
relocations on VxWorks. Add dynamic relocations for references
to the VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Don't
create dynamic relocations for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64
in VxWorks executables.
(mips_elf_allocate_dynamic_relocations): Add a bfd_link_info argument.
Use MIPS_ELF_RELA_SIZE to calculate the size of a VxWorks entry.
Don't allocate a null entry on VxWorks.
(mips_elf_create_dynamic_relocation): Update the call to
mips_elf_rel_dyn_section. Use absolute rather than relative
relocations for VxWorks, and make them RELA rather than REL.
(_bfd_mips_elf_create_dynamic_sections): Don't make .dynamic
read-only on VxWorks. Update the call to mips_elf_rel_dyn_section.
Create the .plt, .rela.plt, .dynbss and .rela.bss sections on
VxWorks. Likewise create the _PROCEDURE_LINKAGE_TABLE symbol.
Call elf_vxworks_create_dynamic_sections for VxWorks and
initialize the plt_header_size and plt_entry_size fields.
(_bfd_mips_elf_check_relocs): Don't allow GOT relocations to be
used in VxWorks executables. Don't allocate dynamic relocations
for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 in VxWorks executables.
Set is_relocation_target for each symbol referenced by a relocation.
Allocate .rela.dyn entries for relocations against the special
VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Create GOT
entries for all VxWorks R_MIPS_GOT16 relocations. Don't allocate
a global GOT entry for symbols mentioned in VxWorks R_MIPS_CALL*,
R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 relocations. Update the calls
to mips_elf_rel_dyn_section and mips_elf_allocate_dynamic_relocations.
Set is_branch_target for symbols mentioned in R_MIPS_PC16 or R_MIPS_26
relocations. Don't set no_fn_stub on VxWorks.
(_bfd_mips_elf_adjust_dynamic_symbol): Update the call to
mips_elf_allocate_dynamic_relocations.
(_bfd_mips_vxworks_adjust_dynamic_symbol): New function.
(_bfd_mips_elf_always_size_sections): Do not allocate GOT page
entries for VxWorks, and do not create multiple GOTs.
(_bfd_mips_elf_size_dynamic_sections): Use MIPS_ELF_REL_DYN_NAME.
Handle .got specially for VxWorks. Update the uses of
MIPS_RESERVED_GOTNO and mips_elf_allocate_dynamic_relocations.
Check for sgotplt and splt. Allocate the .rel(a).dyn contents last,
once its final size is known. Set DF_TEXTREL for VxWorks. Add
DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL, DT_PLTRELSZ and DT_JMPREL
tags on VxWorks. Do not add the MIPS-specific tags for VxWorks.
(_bfd_mips_vxworks_finish_dynamic_symbol): New function.
(mips_vxworks_finish_exec_plt): Likewise.
(mips_vxworks_finish_shared_plt): Likewise.
(_bfd_mips_elf_finish_dynamic_sections): Remove an unncessary call
to mips_elf_rel_dyn_section. Use a VxWorks-specific value of
DT_PLTGOT. Handle DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL,
DT_PLTRELSZ and DT_JMPREL. Update the uses of MIPS_RESERVED_GOTNO
and mips_elf_rel_dyn_section. Use a different GOT header for
VxWorks. Don't sort .rela.dyn on VxWorks. Finish the PLT on VxWorks.
(_bfd_mips_elf_link_hash_table_create): Initialize the new
mips_elf_link_hash_table fields.
(_bfd_mips_vxworks_link_hash_table_create): New function.
(_bfd_mips_elf_final_link): Set the GP value to _GLOBAL_OFFSET_TABLE_
on VxWorks. Update the call to ELF_MIPS_GP_OFFSET.
* elfxx-mips.h (_bfd_mips_vxworks_adjust_dynamic_symbol): Declare.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
(_bfd_mips_vxworks_link_hash_table_create): Likewise.
* libbfd.h: Regenerate.
* Makefile.am (elfxx-mips.lo): Depend on elf-vxworks.h.
(elf32-mips.lo): Likewise.
* Makefile.in: Regenerate.
* reloc.c (BFD_RELOC_MIPS_COPY, BFD_RELOC_MIPS_JUMP_SLOT): Declare.
* targets.c (bfd_elf32_bigmips_vxworks_vec): Declare.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(_bfd_target_vector): Add entries for them.
gas/
* config/tc-mips.c (mips_target_format): Handle vxworks targets.
(md_begin): Complain about -G being used for PIC. Don't change
the text, data and bss alignments on VxWorks.
(reloc_needs_lo_p): Don't return true for R_MIPS_GOT16 when
generating VxWorks PIC.
(load_address): Extend SVR4_PIC handling to VXWORKS_PIC.
(macro): Likewise, but do not treat la $25 specially for
VxWorks PIC, and do not handle jal.
(OPTION_MVXWORKS_PIC): New macro.
(md_longopts): Add -mvxworks-pic.
(md_parse_option): Don't complain about using PIC and -G together here.
Handle OPTION_MVXWORKS_PIC.
(md_estimate_size_before_relax): Always use the first relaxation
sequence on VxWorks.
* config/tc-mips.h (VXWORKS_PIC): New.
gas/testsuite/
* gas/mips/vxworks1.s, gas/mips/vxworks1.d,
* gas/mips/vxworks1-xgot.d: New tests.
* gas/mips/mips.exp: Run them. Do not run other tests on VxWorks.
include/elf/
* mips.h (R_MIPS_COPY, R_MIPS_JUMP_SLOT): New relocs.
ld/
* configure.tgt (mips*el-*-vxworks*, mips*-*-vxworks*): Use
separate VxWorks emulations.
* emulparams/elf32ebmipvxworks.sh: New file.
* emulparams/elf32elmipvxworks.sh: New file.
* Makefile.am (ALL_EMULATIONS): Add eelf32ebmipvxworks.o and
eelf32elmipvxworks.o.
(eelf32ebmipvxworks.c, eelf32elmipvxworks.c): New rules.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-mips/vxworks1.dd, ld-mips/vxworks1.ld, ld-mips/vxworks1-lib.dd,
* ld-mips/vxworks1-lib.nd, ld-mips/vxworks1-lib.rd,
* ld-mips/vxworks1-lib.s, ld-mips/vxworks1.rd, ld-mips/vxworks1.s,
* ld-mips/vxworks1-static.d, ld-mips/vxworks2.s, ld-mips/vxworks2.sd,
* ld-mips/vxworks2-static.sd: New tests.
* ld-mips/mips-elf.exp: Run them.
gas/
* config/tc-arm.c (BAD_BRANCH, BAD_NOT_IT): Define.
(do_t_branch): Encode branches inside IT blocks as unconditional.
(do_t_cps): New function.
(do_t_blx, do_t_bkpt, do_t_branch23, do_t_bx, do_t_bxj, do_t_cpsi,
do_t_czb, do_t_it, do_t_setend, do_t_tb): Add IT constaints.
(opcode_lookup): Allow conditional suffixes on all instructions in
Thumb mode.
(md_assemble): Advance condexec state before checking for errors.
(insns): Use do_t_cps.
gas/testsuite/
* gas/arm/thumb2_bcond.d: New test.
* gas/arm/thumb2_bcond.s: New test.
* gas/arm/thumb2_it_bad.d: New test.
* gas/arm/thumb2_it_bad.l: New test.
* gas/arm/thumb2_it_bad.s: New test.
